African Development Foundation August 25, 2015 – Federal Register Recent Federal Regulation Documents

Proposed Modification of Restricted Area R-7201; Farallon De Medinilla Island; Mariana Islands, GU
Document Number: 2015-21084
Type: Proposed Rule
Date: 2015-08-25
Agency: Historic Preservation, Advisory Council, African Development Foundation
This action proposes to expand the lateral boundary of restricted area R-7201, Farallon De Medinilla Island, Mariana Islands, GU. The expanded restricted airspace would be used to support strategic and attack bombing, close air support bombing, naval gunfire, and strafing and special operations training. This action also proposes to rename the restricted area from R-7201 to R-7201A.
Airworthiness Directives; M7 Aerospace LLC Airplanes
Document Number: 2015-20977
Type: Proposed Rule
Date: 2015-08-25
Agency: Historic Preservation, Advisory Council, African Development Foundation
We propose to adopt a new airworthiness directive (AD) for all M7 Aerospace LLC Models SA26-AT, SA226-T, SA226-AT, SA226-T(B), SA226- TC, SA227-AT, SA227-TT, SA227-AC (C-26A), SA227-BC (C-26A), SA227-CC, and SA227-DC (C-26B) airplanes. This proposed AD was prompted by information that the airplane flight manual (AFM) does not provide adequate guidance in the handling of engine failures, which may lead to reliance on the negative torque system (NTS) for reducing drag. This condition could lead the pilot to not fully feather the propeller with consequent loss of control. This proposed AD would require inserting updates into the airplane flight manual (AFM) and/or the pilot operating handbook (POH) that will clearly establish that the NTS is not designed to automatically feather the propeller but only to provide drag protection. We are proposing this AD to correct the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2015-20853
Type: Proposed Rule
Date: 2015-08-25
Agency: Historic Preservation, Advisory Council, African Development Foundation
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 777-200 series airplanes. This proposed AD was prompted by an evaluation by the design approval holder (DAH) indicating that the skin lap splices at certain stringers in certain fuselage sections are subject to widespread fatigue damage (WFD). This proposed AD would require inspections to detect cracking of fuselage skin lap splices in certain fuselage sections, and corrective actions if necessary; modification of left-side and right-side lap splices; and post-modification repetitive inspections for cracks in the modified lap splices, and corrective actions if necessary. We are proposing this AD to detect and correct fatigue cracking of the skin lap splices, and consequent risk of sudden decompression and the inability to sustain limit flight and pressure loads.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2015-20835
Type: Proposed Rule
Date: 2015-08-25
Agency: Historic Preservation, Advisory Council, African Development Foundation
We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 777-200, -200LR, -300, and -300ER series airplanes. This proposed AD was prompted by reports of fractured forward attach fittings of the inboard flap outboard aft flap track. The fractured fittings were determined to be the result of corrosion pits forming on the inside diameter of the fittings. This proposed AD would require an inspection for the affected part number and serial number of the main flap; various additional repetitive inspections of the fitting, if necessary; and replacement of the fitting or nested bushing installation, if necessary, which would terminate the inspections. This proposed AD would also provide for optional terminating action for the repetitive inspections. We are proposing this AD to detect and correct fracture of the fitting, which could result in the loss of the inboard aft flap and could lead to a punctured fuselage, causing injury to the flightcrew and passengers, and damage to the airplane.
Airworthiness Directives; Cessna Aircraft Company Airplanes
Document Number: 2015-20692
Type: Rule
Date: 2015-08-25
Agency: Historic Preservation, Advisory Council, African Development Foundation
We are adopting a new airworthiness directive (AD) for certain Cessna Aircraft Company Model 500, 501, 550, 551, S550, 560, and 650 airplanes. This AD was prompted by reports of smoke and/or fire in the tailcone caused by sparking due to excessive wear of the brushes in the air conditioning (A/C) motor. This AD requires inspections to determine if certain A/C compressor motors are installed and to determine the accumulated hours on certain A/C compressor motor assemblies; and repetitive replacement of the brushes in the A/C compressor motor assembly, or, as an option to the brush replacement, deactivation of the A/C system and placard installation; and return of replaced brushes to Cessna. We are issuing this AD to prevent the brushes in the A/C motor from wearing down beyond their limits, which could result in the rivet in the brush contacting the commutator, causing sparks and consequent fire and/or smoke in the tailcone with no means to detect or extinguish the fire and/or smoke.
Airworthiness Directives; SOCATA Airplanes
Document Number: 2015-20588
Type: Rule
Date: 2015-08-25
Agency: Historic Preservation, Advisory Council, African Development Foundation
We are superseding Airworthiness Directive (AD) 2007-04-13 for certain SOCATA Model TBM 700 airplaness (type certificate previously held by EADS SOCATA). This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as cracks found on the main landing gear cylinders. We are issuing this AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters
Document Number: 2015-20587
Type: Rule
Date: 2015-08-25
Agency: Historic Preservation, Advisory Council, African Development Foundation
We are adopting a new airworthiness directive (AD) for Airbus Helicopters Model AS350B, AS350BA, AS350B1, AS350B2, AS350B3, AS350C, AS350D, AS350D1, AS355E, AS355F, AS355F1, AS355F2, AS355N, AS355NP, EC130B4, and EC130T2 helicopters. This AD requires inspecting the swashplate assembly rotating star to determine whether a ferrule was installed. If a ferrule exists, this AD requires inspecting the rotating star for a crack and removing any cracked rotating star. This AD was prompted by a report that reconditioning the rotating swashplate per a certain repair procedure could result in the rotating star cracking. The actions of this AD are intended to detect a crack in the rotating star and prevent failure of the rotating star and subsequent loss of control of the helicopter.
Airworthiness Directives; Airbus Airplanes
Document Number: 2015-20585
Type: Rule
Date: 2015-08-25
Agency: Historic Preservation, Advisory Council, African Development Foundation
We are adopting a new airworthiness directive (AD) for all Airbus Model A300 B4-603, B4-605R, B4-620, B4-622, B4-622R airplanes; all Airbus Model A300 C4-605R Variant F airplanes; and certain Airbus Model A300 F4-605R airplanes. This AD was prompted by the manufacturer's review of all repairs accomplished using the structural repair manual. This review was done using revised fatigue and damage tolerance calculations. This AD requires an inspection of the surrounding panels of the left and right forward passenger doors, and corrective actions if necessary. We are issuing this AD to detect and correct previous incomplete or inadequate repairs to the surrounding panels of the left and right forward passenger doors and the fail-safe ring, which could negatively affect the structural integrity of the airplane.
Airworthiness Directives; Bombardier, Inc. Airplanes
Document Number: 2015-20584
Type: Rule
Date: 2015-08-25
Agency: Historic Preservation, Advisory Council, African Development Foundation
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8-400 series airplanes. This AD was prompted by an in-service report of an uncommanded and unannunciated nose wheel steering during airplane pushback from the gate. This AD requires installing new cable assemblies with a pull-down resistor. We are issuing this AD to prevent an uncommanded nose wheel steering during takeoff or landing in the event of an open circuit in the steering system, and possible consequent runway excursion.
Airworthiness Directives; Bombardier, Inc. Airplanes
Document Number: 2015-20581
Type: Rule
Date: 2015-08-25
Agency: Historic Preservation, Advisory Council, African Development Foundation
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by a report of several events where pilots experienced difficulty in lateral control of the airplane after doing a climb through heavy rain conditions and a determination that the cause was water ingress in the aileron control pulley assembly. This AD requires, for certain airplanes, inspecting for correct clearance and rework if necessary, and, for certain other airplanes, installing a cover for the aileron pulley assembly. We are issuing this AD to prevent water ingress in the aileron control pulley assembly, which could freeze in cold conditions and result in reduced control of the airplane.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2015-20372
Type: Rule
Date: 2015-08-25
Agency: Historic Preservation, Advisory Council, African Development Foundation
We are superseding Airworthiness Directive (AD) 2011-08-51 for certain The Boeing Company Model 737-300, -400, and -500 series airplanes. AD 2011-08-51 required repetitive inspections of the lap joint at certain stringers along the entire length from certain body stations. This new AD expands the inspection area, requires additional inspections for cracks and open pockets, requires corrective actions if necessary, and revises the compliance times. This AD was prompted by an evaluation by the design approval holder (DAH) that has determined that the lower fastener holes in the lower skin of the fuselage lap splice are subject to widespread fatigue damage (WFD). We are issuing this AD to detect and correct fatigue cracking of the lower fastener holes in the lower skin of the fuselage lap splice, which could result in reduced structural integrity of the airplane.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.