Certain Corrosion-Resistant Steel Products From Mexico: Preliminary Affirmative Countervailing Duty Determination, and Alignment of Final Determination With Final Antidumping Duty Determination, 9226-9228 [2025-02379]

Download as PDF 9226 Federal Register / Vol. 90, No. 26 / Monday, February 10, 2025 / Notices Estimated weighted-average dumping margin (percent) Exporter Apiário Diamante Comercial Exportadora Ltda/Apiário Diamante Produção e Comercial de Mel Ltda (Supermel) ................. All Others ..................................................................................................................................................................................... Amended AD Order Pursuant to 735(c)(2) of the Act, Commerce shall ‘‘issue an antidumping duty order under section 736(a)’’ of the Act when the final determination is affirmative. As a result of this amended final determination, Commerce is hereby amending the Order to revise the estimated weighted-average dumping margins assigned to Supermel and allother producers and/or exporters of subject merchandise, as noted above. Cash Deposit Requirements Because Supermel does not have a superseding cash deposit rate, i.e., there have been no final results published in a subsequent administrative review, and because of the change to the rate assigned to all other producers and exporters of subject merchandise, Commerce will issue revised cash deposit instructions to U.S. Customs and Border Protection. Notification to Interested Parties This notice is issued and published in accordance with sections 516A(c) and (e) and 777(i)(1) of the Act. Dated: February 4, 2025. Abdelali Elouaradia, Deputy Assistant Secretary for Enforcement and Compliance. [FR Doc. 2025–02416 Filed 2–7–25; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [C–201–864] Certain Corrosion-Resistant Steel Products From Mexico: Preliminary Affirmative Countervailing Duty Determination, and Alignment of Final Determination With Final Antidumping Duty Determination Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY: The U.S. Department of Commerce (Commerce) preliminarily determines that countervailable subsidies are being provided to producers and exporters of certain corrosion-resistant steel products (CORE) from Mexico. The period of investigation is January 1, 2023, through ddrumheller on DSK120RN23PROD with NOTICES1 AGENCY: VerDate Sep<11>2014 17:38 Feb 07, 2025 Jkt 265001 December 31, 2023. Interested parties are invited to comment on this preliminary determination. DATES: Applicable February 10, 2025. FOR FURTHER INFORMATION CONTACT: Drew Jackson or Maria Teresa Aymerich, AD/CVD Operations, Office IV, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–4406 or (202) 482–0499, respectively. SUPPLEMENTARY INFORMATION: Background This preliminary determination is made in accordance with section 703(b) of the Tariff Act of 1930, as amended (the Act). On October 2, 2024, Commerce published the notice of initiation of this countervailing duty (CVD) investigation.1 On November 14, 2024, Commerce postponed the preliminary determination until February 3, 2025.2 For a complete description of the events that followed the initiation of this investigation, see the Preliminary Decision Memorandum.3 A list of topics discussed in the Preliminary Decision Memorandum is included as Appendix II to this notice. The Preliminary Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at https:// access.trade.gov. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly at https://access.trade.gov/public/ FRNoticesListLayout.aspx. 1 See Certain Corrosion-Resistant Steel Products from Brazil, Canada, Mexico, and the Socialist Republic of Vietnam: Initiation of Countervailing Duty Investigations, 89 FR 80204 (October 2, 2024) (Initiation Notice). 2 See Certain Corrosion-Resistant Steel Products from Brazil, Canada, Mexico, and the Socialist Republic of Vietnam: Postponement of Preliminary Determinations in the Countervailing Duty Investigations, 89 FR 89955 (November 14, 2024). 3 See Memorandum, ‘‘Decision Memorandum for the Preliminary Determination of the Countervailing Duty Investigation of Certain Corrosion-Resistant Steel Products from Mexico,’’ dated concurrently with, and hereby adopted by, this notice (Preliminary Decision Memorandum). PO 00000 Frm 00002 Fmt 4703 Sfmt 4703 10.52 9.38 Scope of the Investigation The products covered by this investigation are CORE from Mexico. For a complete description of the scope of this investigation, see Appendix I. Scope Comments In accordance with the Preamble to Commerce’s regulations,4 the Initiation Notice set aside a period of time for parties to raise issues regarding product coverage, (i.e., scope).5 Certain interested parties commented on the scope of the investigation as it appeared in the Initiation Notice. Commerce intends to issue its preliminary decision regarding comments concerning the scope of the less-than-fair-value (LTFV) and CVD investigations in the preliminary determination of the companion LTFV investigations. We will incorporate the scope decisions from the LTFV investigations into the scope of the final CVD determination for this investigation after considering any relevant comments submitted in scope case and rebuttal briefs.6 Methodology Commerce is conducting this investigation in accordance with section 701 of the Act. For each of the subsidy programs found countervailable, Commerce preliminarily determines that there is a subsidy, i.e., a financial contribution by an ‘‘authority’’ that gives rise to a benefit to the recipient, and that the subsidy is specific.7 For a full description of the methodology underlying our preliminary determination, see the Preliminary Decision Memorandum. Alignment In accordance with section 705(a)(1) of the Act and 19 CFR 351.210(b)(4), Commerce is aligning the final CVD determination in this investigation with the final determination in the concurrent LTFV investigation of CORE 4 See Antidumping Duties; Countervailing Duties, Final Rule, 62 FR 27296, 27323 (May 19, 1997) (Preamble). 5 See Initiation Notice, 89 FR at 80205. 6 The deadline for interested parties to submit scope case and rebuttal briefs will be established in the preliminary scope decision memorandum. 7 See sections 771(5)(B) and (D) of the Act regarding financial contribution; section 771(5)(E) of the Act regarding benefit; and section 771(5A) of the Act regarding specificity. E:\FR\FM\10FEN1.SGM 10FEN1 Federal Register / Vol. 90, No. 26 / Monday, February 10, 2025 / Notices from Mexico, based on a request made by the petitioners.8 Consequently, this final CVD determination will be issued on the same date as the final determination for the LTFV investigation, which is currently scheduled to be issued no later than June 17, 2025, unless postponed. All-Others Rate Sections 703(d) and 705(c)(5)(A) of the Act provide that, in the preliminary determination, Commerce shall determine an estimated all-others rate for companies not individually examined. This rate shall be an amount equal to the weighted average of the estimated subsidy rates established for those companies individually examined, excluding any rates that are zero, de minimis, or based entirely under section 776 of the Act. In this investigation, Commerce preliminarily found a zero rate for Galvasid. Therefore, the only rate that is not zero, de minimis or based entirely on facts otherwise available is the rate calculated for Ternium. Consequently, the rate calculated for Ternium is also assigned as the rate for all other producers and exporters. Preliminary Determination Commerce preliminarily determines that the following estimated countervailable subsidy rates exist: Company Subsidy rate (percent ad valorem) Ternium Mexico, S.A. de C.V.9 .................................. Galvasid S.A. de C.V.10 ....... All Others .............................. 1.56 0.00 1.56 Disclosure ddrumheller on DSK120RN23PROD with NOTICES1 Commerce intends to disclose its calculations and analysis performed to interested parties in this preliminary determination within five days of its public announcement, or if there is no public announcement, within five days of the date of this notice in accordance with 19 CFR 351.224(b). 8 See Petitioners’ Letter, ‘‘Request to Align the Final Determination,’’ dated January 6, 2025. 9 As discussed in the Preliminary Decision Memorandum, Commerce has found the following companies to be cross-owned with Ternium Mexico, S.A. de C.V.: Ferropak Comercial, S.A. de C.V., Las Encinas, S.A. de C.V., Consorcio Minero Benito Juarez Peña Colorada, S.A. de C.V., Techgen, S.A. de C.V., Tenigal, S.A. de C.V., and Ternium Gas Mexico, S.A. de C.V. 10 As discussed in the Preliminary Decision Memorandum, Commerce has found the following companies to be cross-owned with Galvasid, S.A. de C.V.: Perfiles LM, S.A. de C.V., Indalum, S.A. de C.V., and Grupo Industrial LM, S.A. de C.V. VerDate Sep<11>2014 17:38 Feb 07, 2025 Jkt 265001 Consistent with 19 CFR 351.224(e), Commerce will analyze and, if appropriate, correct any timely allegations of significant ministerial errors by amending the preliminary determination. However, consistent with 19 CFR 351.224(d), Commerce will not consider incomplete allegations that do not address the significance standard under 19 CFR 351.224(g) following the preliminary determination. Instead, Commerce will address such allegations in the final determination together with issues raised in the case briefs or other written comments. Suspension of Liquidation In accordance with sections 703(d)(1)(B) and (d)(2) of the Act, Commerce will direct U.S. Customs and Border Protection (CBP) to suspend liquidation of entries of subject merchandise as described in the scope of the investigation section entered, or withdrawn from warehouse, for consumption on or after the date of publication of this notice in the Federal Register. Further, pursuant to 19 CFR 351.205(d), Commerce will instruct CBP to require a cash deposit equal to the rates indicated above. Because the subsidy rate for Galvasid is zero, Commerce is directing CBP not to suspend liquidation of entries of the merchandise from this company. Verification As provided in section 782(i)(1) of the Act, Commerce intends to verify the information relied upon in making its final determination. Public Comment All interested parties will have the opportunity to submit scope case and rebuttal briefs on the preliminary decision regarding the scope of the LTFV and CVD investigations. The deadlines to submit scope case and rebuttal briefs will be provided in the preliminary scope decision memorandum. For all scope case and rebuttal briefs, parties must file identical documents simultaneously on the records of the ongoing LTFV and CVD CORE investigations. No new factual information or business proprietary information may be included in either scope case or rebuttal briefs. Case briefs or other written comments, excluding scope comments, may be submitted to the Assistant Secretary for Enforcement and Compliance no later than seven days after the date on which the last verification report is issued in this investigation. Rebuttal briefs, limited to issues raised in the case briefs, may be PO 00000 Frm 00003 Fmt 4703 Sfmt 4703 9227 filed not later than five days after the date for filing case briefs.11 Interested parties who submit case or rebuttal briefs in this proceeding must submit: (1) a table of contents listing each issue; and (2) a table of authorities.12 As provided under 19 CFR 351.309(c)(2) and (d)(2), in prior proceedings we have encouraged interested parties to provide an executive summary of their brief that should be limited to five pages total, including footnotes. In this investigation, we instead request that interested parties provide at the beginning of their briefs a public, executive summary for each issue raised in their briefs.13 Further, we request that interested parties limit their executive summary of each issue to no more than 450 words, not including citations. We intend to use the executive summaries as the basis of the comment summaries included in the issues and decision memorandum that will accompany the final determination in this investigation. We request that interested parties include footnotes for relevant citations in the executive summary of each issue. Note that Commerce has amended certain of its requirements pertaining to the service of documents in 19 CFR 351.303(f).14 Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing, limited to issues raised in the case and rebuttal briefs, must submit a written request to the Assistant Secretary for Enforcement and Compliance, U.S. Department of Commerce within 30 days after the date of publication of this notice. Requests should contain the party’s name, address, and telephone number, the number of participants and whether any participant is a foreign national, and a list of the issues to be discussed. If a request for a hearing is made, Commerce intends to hold the hearing at a time and date to be determined. Parties should confirm by telephone the date, time, and location of the hearing two days before the scheduled date. U.S. International Trade Commission (ITC) Notification In accordance with section 703(f) of the Act, Commerce will notify the ITC of its determination. If the final 11 See 19 CFR 351.309(d); see also Administrative Protective Order, Service, and Other Procedures in Antidumping and Countervailing Duty Proceedings, 88 FR 67069, 67077 (September 29, 2023) (APO and Service Final Rule). 12 See 19 351.309(c)(2) and (d)(2). 13 We use the term ‘‘issue’’ here to describe an argument that Commerce would normally address in a comment of the Issues and Decision Memorandum. 14 See APO and Service Final Rule. E:\FR\FM\10FEN1.SGM 10FEN1 9228 Federal Register / Vol. 90, No. 26 / Monday, February 10, 2025 / Notices determination is affirmative, the ITC will determine before the later of 120 days after the date of this preliminary determination or 45 days after the final determination whether imports of CORE from Mexico are materially injuring, or threaten material injury to, the U.S. industry. Notification to Interested Parties This determination is issued and published pursuant to sections 703(f) and 777(i) of the Act, and 19 CFR 351.205(c). Dated: February 3, 2025. Abdelali Elouaradia, Deputy Assistant Secretary for Enforcement and Compliance. ddrumheller on DSK120RN23PROD with NOTICES1 Appendix I Scope of the Investigation The products covered by this investigation are certain flat-rolled steel products, either clad, plated, or coated with corrosionresistant metals such as zinc, aluminum, or zinc-, aluminum-, nickel- or iron-based alloys, whether or not corrugated or painted, varnished, laminated, or coated with plastics or other non-metallic substances in addition to the metallic coating. The products covered include coils that have a width of 12.7 mm or greater, regardless of form of coil (e.g., in successively superimposed layers, spirally oscillating, etc.). The products covered also include products not in coils (e.g., in straight lengths) of a thickness less than 4.75 mm and a width that is 12.7 mm or greater and that measures at least 10 times the thickness. The products covered also include products not in coils (e.g., in straight lengths) of a thickness of 4.75 mm or more and a width exceeding 150 mm and measuring at least twice the thickness. The products described above may be rectangular, square, circular, or other shape and include products of either rectangular or non-rectangular cross-section where such cross-section is achieved subsequent to the rolling process, i.e., products which have been ‘‘worked after rolling’’ (e.g., products which have been beveled or rounded at the edges). For purposes of the width and thickness requirements referenced above: (1) Where the nominal and actual measurements vary, a product is within the scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set forth above, and (2) where the width and thickness vary for a specific product (e.g., the thickness of certain products with non-rectangular crosssection, the width of certain products with non-rectangular shape, etc.), the measurement at its greatest width or thickness applies. Steel products included in the scope of this investigation are products in which: (1) iron predominates, by weight, over each of the other contained elements; and (2) the carbon content is 2 percent or less, by weight. Subject merchandise also includes corrosionresistant steel that has been further processed VerDate Sep<11>2014 17:38 Feb 07, 2025 Jkt 265001 in a third country, including but not limited to annealing, tempering, painting, varnishing, trimming, cutting, punching and/or slitting or any other processing that would not otherwise remove the merchandise from the scope of the investigations if performed in the country of manufacture of the in-scope corrosion resistant steel. All products that meet the written physical description are within the scope of this investigation unless specifically excluded. The following products are outside of and/or specifically excluded from the scope of this investigation: • Flat-rolled steel products either plated or coated with tin, lead, chromium, chromium oxides (‘‘tin free steel’’), whether or not painted, varnished or coated with plastics or other nonmetallic substances in addition to the metallic coating; • Clad products in straight lengths of 4.7625 mm or more in composite thickness and of a width which exceeds 150 mm and measures at least twice the thickness; • Certain clad stainless flat-rolled products, which are three-layered corrosionresistant carbon steel flat-rolled products less than 4.75 mm in composite thickness that consist of a carbon steel flat-rolled product clad on both sides with stainless steel in a 20%–60%–20% ratio; and Also excluded from the scope of the antidumping duty investigation on corrosion resistant steel from Taiwan are any products covered by the existing antidumping duty order on corrosion-resistant steel from Taiwan. See Certain Corrosion-Resistant Steel Products from India, Italy, the People’s Republic of China, the Republic of Korea and Taiwan: Amended Final Affirmative Antidumping Determination for India and Taiwan, and Antidumping Duty Orders, 81 FR 48390 (July 25, 2016); Corrosion-Resistant Steel Products from Taiwan: Notice of Third Amended Final Determination of Sales at Less Than Fair Value Pursuant to Court Decision and Partial Exclusion from Antidumping Duty Order, 88 FR 58245 (August 25, 2023). Also excluded from the scope of the antidumping duty investigation on corrosionresistant steel from the United Arab Emirates and the antidumping duty and countervailing duty investigations on corrosion-resistant steel from the Socialist Republic of Vietnam are any products covered by the existing antidumping and countervailing duty orders on corrosion-resistant steel from the People’s Republic of China and the Republic of Korea and the antidumping duty order on corrosion-resistant steel from Taiwan. See Certain Corrosion-Resistant Steel Products from India, Italy, the People’s Republic of China, the Republic of Korea and Taiwan: Amended Final Affirmative Antidumping Determination for India and Taiwan, and Antidumping Duty Orders, 81 FR 48390 (July 25, 2016); see also Certain CorrosionResistant Steel Products from India, Italy, Republic of Korea and the People’s Republic of China: Countervailing Duty Order, 81 FR 48387 (July 25, 2016). This exclusion does not apply to imports of corrosion-resistant steel that are entered, or withdrawn from warehouse, for consumption in the United States for which the relevant importer and PO 00000 Frm 00004 Fmt 4703 Sfmt 4703 exporter certifications have been completed and maintained and all other applicable certification requirements have been met such that the entry is entered into the United States as not subject to the antidumping and countervailing duty orders on corrosionresistant steel from the People’s Republic of China, the antidumping and countervailing duty orders on corrosion-resistant steel from the Republic of Korea, or the antidumping duty order on corrosion-resistant steel from Taiwan. The products subject to the investigation are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers: 7210.30.0030, 7210.30.0060, 7210.41.0000, 7210.49.0030, 7210.49.0040, 7210.49.0045, 7210.49.0091, 7210.49.0095, 7210.61.0000, 7210.69.0000, 7210.70.6030, 7210.70.6060, 7210.70.6090, 7210.90.6000, 7210.90.9000, 7212.20.0000, 7212.30.1030, 7212.30.1090, 7212.30.3000, 7212.30.5000, 7212.40.1000, 7212.40.5000, 7212.50.0000, 7212.60.0000, 7225.91.0000, 7225.92.0000, 7226.99.0110, and 7226.99.0130. The products subject to the investigations may also enter under the following HTSUS item numbers: 7210.90.1000, 7215.90.1000, 7215.90.3000, 7215.90.5000, 7217.20.1500, 7217.30.1530, 7217.30.1560, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.99.0090, 7226.99.0180, 7228.60.6000, 7228.60.8000, and 7229.90.1000. The HTSUS subheadings above are provided for convenience and customs purposes only. The written description of the scope of the investigations is dispositive. Appendix II List of Topics Discussed in the Preliminary Decision Memorandum I. Summary II. Background III. Injury Test IV. Subsidies Valuation V. Benchmark Interest Rates and Discount Rates VI. Analysis of Programs VII. Recommendation [FR Doc. 2025–02379 Filed 2–7–25; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [C–351–863] Certain Corrosion-Resistant Steel Products From Brazil: Preliminary Affirmative Countervailing Duty Determination, and Alignment of Final Determination With Final Antidumping Duty Determination Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY: The U.S. Department of Commerce (Commerce) preliminarily determines that countervailable subsidies are being provided to AGENCY: E:\FR\FM\10FEN1.SGM 10FEN1

Agencies

[Federal Register Volume 90, Number 26 (Monday, February 10, 2025)]
[Notices]
[Pages 9226-9228]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2025-02379]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[C-201-864]


Certain Corrosion-Resistant Steel Products From Mexico: 
Preliminary Affirmative Countervailing Duty Determination, and 
Alignment of Final Determination With Final Antidumping Duty 
Determination

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.

SUMMARY: The U.S. Department of Commerce (Commerce) preliminarily 
determines that countervailable subsidies are being provided to 
producers and exporters of certain corrosion-resistant steel products 
(CORE) from Mexico. The period of investigation is January 1, 2023, 
through December 31, 2023. Interested parties are invited to comment on 
this preliminary determination.

DATES: Applicable February 10, 2025.

FOR FURTHER INFORMATION CONTACT: Drew Jackson or Maria Teresa Aymerich, 
AD/CVD Operations, Office IV, Enforcement and Compliance, International 
Trade Administration, U.S. Department of Commerce, 1401 Constitution 
Avenue NW, Washington, DC 20230; telephone: (202) 482-4406 or (202) 
482-0499, respectively.

SUPPLEMENTARY INFORMATION: 

Background

    This preliminary determination is made in accordance with section 
703(b) of the Tariff Act of 1930, as amended (the Act). On October 2, 
2024, Commerce published the notice of initiation of this 
countervailing duty (CVD) investigation.\1\ On November 14, 2024, 
Commerce postponed the preliminary determination until February 3, 
2025.\2\
---------------------------------------------------------------------------

    \1\ See Certain Corrosion-Resistant Steel Products from Brazil, 
Canada, Mexico, and the Socialist Republic of Vietnam: Initiation of 
Countervailing Duty Investigations, 89 FR 80204 (October 2, 2024) 
(Initiation Notice).
    \2\ See Certain Corrosion-Resistant Steel Products from Brazil, 
Canada, Mexico, and the Socialist Republic of Vietnam: Postponement 
of Preliminary Determinations in the Countervailing Duty 
Investigations, 89 FR 89955 (November 14, 2024).
---------------------------------------------------------------------------

    For a complete description of the events that followed the 
initiation of this investigation, see the Preliminary Decision 
Memorandum.\3\ A list of topics discussed in the Preliminary Decision 
Memorandum is included as Appendix II to this notice. The Preliminary 
Decision Memorandum is a public document and is on file electronically 
via Enforcement and Compliance's Antidumping and Countervailing Duty 
Centralized Electronic Service System (ACCESS). ACCESS is available to 
registered users at https://access.trade.gov. In addition, a complete 
version of the Preliminary Decision Memorandum can be accessed directly 
at https://access.trade.gov/public/FRNoticesListLayout.aspx.
---------------------------------------------------------------------------

    \3\ See Memorandum, ``Decision Memorandum for the Preliminary 
Determination of the Countervailing Duty Investigation of Certain 
Corrosion-Resistant Steel Products from Mexico,'' dated concurrently 
with, and hereby adopted by, this notice (Preliminary Decision 
Memorandum).
---------------------------------------------------------------------------

Scope of the Investigation

    The products covered by this investigation are CORE from Mexico. 
For a complete description of the scope of this investigation, see 
Appendix I.

Scope Comments

    In accordance with the Preamble to Commerce's regulations,\4\ the 
Initiation Notice set aside a period of time for parties to raise 
issues regarding product coverage, (i.e., scope).\5\ Certain interested 
parties commented on the scope of the investigation as it appeared in 
the Initiation Notice. Commerce intends to issue its preliminary 
decision regarding comments concerning the scope of the less-than-fair-
value (LTFV) and CVD investigations in the preliminary determination of 
the companion LTFV investigations. We will incorporate the scope 
decisions from the LTFV investigations into the scope of the final CVD 
determination for this investigation after considering any relevant 
comments submitted in scope case and rebuttal briefs.\6\
---------------------------------------------------------------------------

    \4\ See Antidumping Duties; Countervailing Duties, Final Rule, 
62 FR 27296, 27323 (May 19, 1997) (Preamble).
    \5\ See Initiation Notice, 89 FR at 80205.
    \6\ The deadline for interested parties to submit scope case and 
rebuttal briefs will be established in the preliminary scope 
decision memorandum.
---------------------------------------------------------------------------

Methodology

    Commerce is conducting this investigation in accordance with 
section 701 of the Act. For each of the subsidy programs found 
countervailable, Commerce preliminarily determines that there is a 
subsidy, i.e., a financial contribution by an ``authority'' that gives 
rise to a benefit to the recipient, and that the subsidy is 
specific.\7\ For a full description of the methodology underlying our 
preliminary determination, see the Preliminary Decision Memorandum.
---------------------------------------------------------------------------

    \7\ See sections 771(5)(B) and (D) of the Act regarding 
financial contribution; section 771(5)(E) of the Act regarding 
benefit; and section 771(5A) of the Act regarding specificity.
---------------------------------------------------------------------------

Alignment

    In accordance with section 705(a)(1) of the Act and 19 CFR 
351.210(b)(4), Commerce is aligning the final CVD determination in this 
investigation with the final determination in the concurrent LTFV 
investigation of CORE

[[Page 9227]]

from Mexico, based on a request made by the petitioners.\8\ 
Consequently, this final CVD determination will be issued on the same 
date as the final determination for the LTFV investigation, which is 
currently scheduled to be issued no later than June 17, 2025, unless 
postponed.
---------------------------------------------------------------------------

    \8\ See Petitioners' Letter, ``Request to Align the Final 
Determination,'' dated January 6, 2025.
---------------------------------------------------------------------------

All-Others Rate

    Sections 703(d) and 705(c)(5)(A) of the Act provide that, in the 
preliminary determination, Commerce shall determine an estimated all-
others rate for companies not individually examined. This rate shall be 
an amount equal to the weighted average of the estimated subsidy rates 
established for those companies individually examined, excluding any 
rates that are zero, de minimis, or based entirely under section 776 of 
the Act.
    In this investigation, Commerce preliminarily found a zero rate for 
Galvasid. Therefore, the only rate that is not zero, de minimis or 
based entirely on facts otherwise available is the rate calculated for 
Ternium. Consequently, the rate calculated for Ternium is also assigned 
as the rate for all other producers and exporters.

Preliminary Determination

    Commerce preliminarily determines that the following estimated 
countervailable subsidy rates exist:
---------------------------------------------------------------------------

    \9\ As discussed in the Preliminary Decision Memorandum, 
Commerce has found the following companies to be cross-owned with 
Ternium Mexico, S.A. de C.V.: Ferropak Comercial, S.A. de C.V., Las 
Encinas, S.A. de C.V., Consorcio Minero Benito Juarez Pe[ntilde]a 
Colorada, S.A. de C.V., Techgen, S.A. de C.V., Tenigal, S.A. de 
C.V., and Ternium Gas Mexico, S.A. de C.V.
    \10\ As discussed in the Preliminary Decision Memorandum, 
Commerce has found the following companies to be cross-owned with 
Galvasid, S.A. de C.V.: Perfiles LM, S.A. de C.V., Indalum, S.A. de 
C.V., and Grupo Industrial LM, S.A. de C.V.

------------------------------------------------------------------------
                                                           Subsidy rate
                         Company                            (percent ad
                                                             valorem)
------------------------------------------------------------------------
Ternium Mexico, S.A. de C.V.\9\.........................            1.56
Galvasid S.A. de C.V.\10\...............................            0.00
All Others..............................................            1.56
------------------------------------------------------------------------

Disclosure

    Commerce intends to disclose its calculations and analysis 
performed to interested parties in this preliminary determination 
within five days of its public announcement, or if there is no public 
announcement, within five days of the date of this notice in accordance 
with 19 CFR 351.224(b).
    Consistent with 19 CFR 351.224(e), Commerce will analyze and, if 
appropriate, correct any timely allegations of significant ministerial 
errors by amending the preliminary determination. However, consistent 
with 19 CFR 351.224(d), Commerce will not consider incomplete 
allegations that do not address the significance standard under 19 CFR 
351.224(g) following the preliminary determination. Instead, Commerce 
will address such allegations in the final determination together with 
issues raised in the case briefs or other written comments.

Suspension of Liquidation

    In accordance with sections 703(d)(1)(B) and (d)(2) of the Act, 
Commerce will direct U.S. Customs and Border Protection (CBP) to 
suspend liquidation of entries of subject merchandise as described in 
the scope of the investigation section entered, or withdrawn from 
warehouse, for consumption on or after the date of publication of this 
notice in the Federal Register. Further, pursuant to 19 CFR 351.205(d), 
Commerce will instruct CBP to require a cash deposit equal to the rates 
indicated above. Because the subsidy rate for Galvasid is zero, 
Commerce is directing CBP not to suspend liquidation of entries of the 
merchandise from this company.

Verification

    As provided in section 782(i)(1) of the Act, Commerce intends to 
verify the information relied upon in making its final determination.

Public Comment

    All interested parties will have the opportunity to submit scope 
case and rebuttal briefs on the preliminary decision regarding the 
scope of the LTFV and CVD investigations. The deadlines to submit scope 
case and rebuttal briefs will be provided in the preliminary scope 
decision memorandum. For all scope case and rebuttal briefs, parties 
must file identical documents simultaneously on the records of the 
ongoing LTFV and CVD CORE investigations. No new factual information or 
business proprietary information may be included in either scope case 
or rebuttal briefs.
    Case briefs or other written comments, excluding scope comments, 
may be submitted to the Assistant Secretary for Enforcement and 
Compliance no later than seven days after the date on which the last 
verification report is issued in this investigation. Rebuttal briefs, 
limited to issues raised in the case briefs, may be filed not later 
than five days after the date for filing case briefs.\11\ Interested 
parties who submit case or rebuttal briefs in this proceeding must 
submit: (1) a table of contents listing each issue; and (2) a table of 
authorities.\12\
---------------------------------------------------------------------------

    \11\ See 19 CFR 351.309(d); see also Administrative Protective 
Order, Service, and Other Procedures in Antidumping and 
Countervailing Duty Proceedings, 88 FR 67069, 67077 (September 29, 
2023) (APO and Service Final Rule).
    \12\ See 19 351.309(c)(2) and (d)(2).
---------------------------------------------------------------------------

    As provided under 19 CFR 351.309(c)(2) and (d)(2), in prior 
proceedings we have encouraged interested parties to provide an 
executive summary of their brief that should be limited to five pages 
total, including footnotes. In this investigation, we instead request 
that interested parties provide at the beginning of their briefs a 
public, executive summary for each issue raised in their briefs.\13\ 
Further, we request that interested parties limit their executive 
summary of each issue to no more than 450 words, not including 
citations. We intend to use the executive summaries as the basis of the 
comment summaries included in the issues and decision memorandum that 
will accompany the final determination in this investigation. We 
request that interested parties include footnotes for relevant 
citations in the executive summary of each issue. Note that Commerce 
has amended certain of its requirements pertaining to the service of 
documents in 19 CFR 351.303(f).\14\
---------------------------------------------------------------------------

    \13\ We use the term ``issue'' here to describe an argument that 
Commerce would normally address in a comment of the Issues and 
Decision Memorandum.
    \14\ See APO and Service Final Rule.
---------------------------------------------------------------------------

    Pursuant to 19 CFR 351.310(c), interested parties who wish to 
request a hearing, limited to issues raised in the case and rebuttal 
briefs, must submit a written request to the Assistant Secretary for 
Enforcement and Compliance, U.S. Department of Commerce within 30 days 
after the date of publication of this notice. Requests should contain 
the party's name, address, and telephone number, the number of 
participants and whether any participant is a foreign national, and a 
list of the issues to be discussed. If a request for a hearing is made, 
Commerce intends to hold the hearing at a time and date to be 
determined. Parties should confirm by telephone the date, time, and 
location of the hearing two days before the scheduled date.

U.S. International Trade Commission (ITC) Notification

    In accordance with section 703(f) of the Act, Commerce will notify 
the ITC of its determination. If the final

[[Page 9228]]

determination is affirmative, the ITC will determine before the later 
of 120 days after the date of this preliminary determination or 45 days 
after the final determination whether imports of CORE from Mexico are 
materially injuring, or threaten material injury to, the U.S. industry.

Notification to Interested Parties

    This determination is issued and published pursuant to sections 
703(f) and 777(i) of the Act, and 19 CFR 351.205(c).

    Dated: February 3, 2025.
Abdelali Elouaradia,
Deputy Assistant Secretary for Enforcement and Compliance.

Appendix I

Scope of the Investigation

    The products covered by this investigation are certain flat-
rolled steel products, either clad, plated, or coated with 
corrosion-resistant metals such as zinc, aluminum, or zinc-, 
aluminum-, nickel- or iron-based alloys, whether or not corrugated 
or painted, varnished, laminated, or coated with plastics or other 
non-metallic substances in addition to the metallic coating. The 
products covered include coils that have a width of 12.7 mm or 
greater, regardless of form of coil (e.g., in successively 
superimposed layers, spirally oscillating, etc.). The products 
covered also include products not in coils (e.g., in straight 
lengths) of a thickness less than 4.75 mm and a width that is 12.7 
mm or greater and that measures at least 10 times the thickness. The 
products covered also include products not in coils (e.g., in 
straight lengths) of a thickness of 4.75 mm or more and a width 
exceeding 150 mm and measuring at least twice the thickness. The 
products described above may be rectangular, square, circular, or 
other shape and include products of either rectangular or non-
rectangular cross-section where such cross-section is achieved 
subsequent to the rolling process, i.e., products which have been 
``worked after rolling'' (e.g., products which have been beveled or 
rounded at the edges).
    For purposes of the width and thickness requirements referenced 
above:
    (1) Where the nominal and actual measurements vary, a product is 
within the scope if application of either the nominal or actual 
measurement would place it within the scope based on the definitions 
set forth above, and
    (2) where the width and thickness vary for a specific product 
(e.g., the thickness of certain products with non-rectangular cross-
section, the width of certain products with non-rectangular shape, 
etc.), the measurement at its greatest width or thickness applies.
    Steel products included in the scope of this investigation are 
products in which: (1) iron predominates, by weight, over each of 
the other contained elements; and (2) the carbon content is 2 
percent or less, by weight. Subject merchandise also includes 
corrosion-resistant steel that has been further processed in a third 
country, including but not limited to annealing, tempering, 
painting, varnishing, trimming, cutting, punching and/or slitting or 
any other processing that would not otherwise remove the merchandise 
from the scope of the investigations if performed in the country of 
manufacture of the in-scope corrosion resistant steel.
    All products that meet the written physical description are 
within the scope of this investigation unless specifically excluded. 
The following products are outside of and/or specifically excluded 
from the scope of this investigation:
     Flat-rolled steel products either plated or coated with 
tin, lead, chromium, chromium oxides (``tin free steel''), whether 
or not painted, varnished or coated with plastics or other 
nonmetallic substances in addition to the metallic coating;
     Clad products in straight lengths of 4.7625 mm or more 
in composite thickness and of a width which exceeds 150 mm and 
measures at least twice the thickness;
     Certain clad stainless flat-rolled products, which are 
three-layered corrosion-resistant carbon steel flat-rolled products 
less than 4.75 mm in composite thickness that consist of a carbon 
steel flat-rolled product clad on both sides with stainless steel in 
a 20%-60%-20% ratio; and
    Also excluded from the scope of the antidumping duty 
investigation on corrosion resistant steel from Taiwan are any 
products covered by the existing antidumping duty order on 
corrosion-resistant steel from Taiwan. See Certain Corrosion-
Resistant Steel Products from India, Italy, the People's Republic of 
China, the Republic of Korea and Taiwan: Amended Final Affirmative 
Antidumping Determination for India and Taiwan, and Antidumping Duty 
Orders, 81 FR 48390 (July 25, 2016); Corrosion-Resistant Steel 
Products from Taiwan: Notice of Third Amended Final Determination of 
Sales at Less Than Fair Value Pursuant to Court Decision and Partial 
Exclusion from Antidumping Duty Order, 88 FR 58245 (August 25, 
2023).
    Also excluded from the scope of the antidumping duty 
investigation on corrosion-resistant steel from the United Arab 
Emirates and the antidumping duty and countervailing duty 
investigations on corrosion-resistant steel from the Socialist 
Republic of Vietnam are any products covered by the existing 
antidumping and countervailing duty orders on corrosion-resistant 
steel from the People's Republic of China and the Republic of Korea 
and the antidumping duty order on corrosion-resistant steel from 
Taiwan. See Certain Corrosion-Resistant Steel Products from India, 
Italy, the People's Republic of China, the Republic of Korea and 
Taiwan: Amended Final Affirmative Antidumping Determination for 
India and Taiwan, and Antidumping Duty Orders, 81 FR 48390 (July 25, 
2016); see also Certain Corrosion-Resistant Steel Products from 
India, Italy, Republic of Korea and the People's Republic of China: 
Countervailing Duty Order, 81 FR 48387 (July 25, 2016). This 
exclusion does not apply to imports of corrosion-resistant steel 
that are entered, or withdrawn from warehouse, for consumption in 
the United States for which the relevant importer and exporter 
certifications have been completed and maintained and all other 
applicable certification requirements have been met such that the 
entry is entered into the United States as not subject to the 
antidumping and countervailing duty orders on corrosion-resistant 
steel from the People's Republic of China, the antidumping and 
countervailing duty orders on corrosion-resistant steel from the 
Republic of Korea, or the antidumping duty order on corrosion-
resistant steel from Taiwan.
    The products subject to the investigation are currently 
classified in the Harmonized Tariff Schedule of the United States 
(HTSUS) under item numbers: 7210.30.0030, 7210.30.0060, 
7210.41.0000, 7210.49.0030, 7210.49.0040, 7210.49.0045, 
7210.49.0091, 7210.49.0095, 7210.61.0000, 7210.69.0000, 
7210.70.6030, 7210.70.6060, 7210.70.6090, 7210.90.6000, 
7210.90.9000, 7212.20.0000, 7212.30.1030, 7212.30.1090, 
7212.30.3000, 7212.30.5000, 7212.40.1000, 7212.40.5000, 
7212.50.0000, 7212.60.0000, 7225.91.0000, 7225.92.0000, 
7226.99.0110, and 7226.99.0130.
    The products subject to the investigations may also enter under 
the following HTSUS item numbers: 7210.90.1000, 7215.90.1000, 
7215.90.3000, 7215.90.5000, 7217.20.1500, 7217.30.1530, 
7217.30.1560, 7217.90.1000, 7217.90.5030, 7217.90.5060, 
7217.90.5090, 7225.99.0090, 7226.99.0180, 7228.60.6000, 
7228.60.8000, and 7229.90.1000.
    The HTSUS subheadings above are provided for convenience and 
customs purposes only. The written description of the scope of the 
investigations is dispositive.

Appendix II

List of Topics Discussed in the Preliminary Decision Memorandum

I. Summary
II. Background
III. Injury Test
IV. Subsidies Valuation
V. Benchmark Interest Rates and Discount Rates
VI. Analysis of Programs
VII. Recommendation

[FR Doc. 2025-02379 Filed 2-7-25; 8:45 am]
BILLING CODE 3510-DS-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.