Renewal of the United States Manufacturing Council, 47898 [2024-12156]
Download as PDF
<![CDATA[
ddrumheller on DSK120RN23PROD with NOTICES1
47898
Federal Register / Vol. 89, No. 108 / Tuesday, June 4, 2024 / Notices
pumped environment to improve the
evaporatively cooled gas temperatures
due to suppression of hole-induced
heating.
Docket Number: 24–004. Applicant:
University of Colorado JILA
Department, 1900 Colorado Avenue,
Campus Box 440 UCB, Boulder, CO
80309. Instrument: Fiber Laser.
Manufacturer: Shanghai Precilasers
Technology Co., China. Intended Use:
The instrument is intended to be used
for research that will be conducted on
barely interacting Strontium (Sr) atoms
confined and cooled by lasers down to
extremely cold temperatures, below 1
microkelvin. The frequency of transition
to a highly stable state in Sr atoms can
be used as the reference of the unit of
time. To realize the atomic clock
operation, precision quantum
spectroscopy experiment will be
performed to measure the transition
frequency. The laser claimed for the
duty-exemption is an 813 nm fiber laser
module with a single-mode continuouswave (CW) output power of 10 W,
which will be used for setting up the
813 nm magic-wavelength optical lattice
for our experiment. The Sr atoms are
thus confined in each lattice node while
showing minimally perturbed transition
frequency. The research is conducted by
graduated students at the University of
Colorado as field training in their degree
programs.
Docket Number: 24–005. Applicant:
University of Florida, P.O. Box 118525,
Gainesville, FL 32611. Instrument:
UniPrep2 for determining hydrogen
isotopic composition. Manufacturer:
EuroVectro, Italy. Intended Use: The
instrument Uniprep2 is intended to be
used in the measurement of hydrogen
isotope composition of complex organic
samples to control hydrogen-isotope
exchange and for sample drying and
vapor equilibration. The properties of
the materials studied are that they have
exchangeable hydrogen and residual
moisture contamination. This
instrument helps to address those
complications that can have biased
results.
Docket Number: 24–006. Applicant:
University of Colorado JILA
Department, Campus Box 440 UCB, JILA
Building, Room S/175, Boulder, CO
80309. Instrument: Narrow linewidth
laser@2923nm. Manufacturer: Shanghai
Precilasers Technology Co., Ltd, China.
Intended Use: The instrument is
intended to be used to study continuous
superradiant lasing from Stontium
atoms. The lasing will induced in part
using the lasing system purchased. The
laser will be used to perform
experiments that will demonstrate (for
the first time anywhere) continuous
VerDate Sep<11>2014
17:15 Jun 03, 2024
Jkt 262001
superradiant lasing. The laser will be
used to cool the atoms to a few
millionths of a degree above absolute
zero. To achieve these goals, we require
a narrowlinewidth laser source
(<50kHz) with high output power
(>400mW) at 2923 nm for laser cooling
and trapping Strontium atoms using the
internal levels 3P2 to 3D3.
Docket Number: 24–007. Applicant:
University of Massachusetts Amherst,
Department of Polymer Science and
Engineering, 120 Governors Drive,
Amherst, MA 01003. Instrument: Food
Elasticity Measurement System.
Manufacturer: Changfu Technology
(Beijing) Company, Ltd., China.
Intended Use: The instrument is
intended to be used for rubber
elasticity—The system allows for
measuring properties such as elastic
modulus, stress-strain relationship, and
resilience of rubber materials; Food
texture temperature response and
elasticity, with the temperature control
unit, the system enables studying how
food textures change in elasticity and
firmness with temperature variations;
and Polymer glass thermal analysis—the
system’s thermal analysis capabilities
facilitate the examination of heat
conduction properties in polymer
glasses, including thermal conductivity
and heat transfer behavior.
Docket Number: 24–008. Applicant:
Harvard University, Department of
Physics, 17 Oxford Street, Jefferson
Laboratory, Cambridge, MA 02138.
Instrument: (1) 703nm single frequency
fiber laser, (1) 1080nm single-frequency
fiber laser. Manufacturer: Shanghai
Precilaser Technology, Co., Ltd., China.
Intended Use: The instruments are
intended to be used in support of the
Advanced Cold Molecule Electron
Electric Dipole Moment Experiment
(ACME EDM experiment), a
collaborative physics experiment now
between Harvard University,
Northwestern University, and
University of Chicago. The goal of the
ACME project is to shed light on the
reasons for why there is more matter
than antimatter in the universe through
the measurement of properties of the
Thorium-232 Monoxide molecules.
Dated: May 29, 2024.
Gregory W. Campbell,
Director, Subsidies and Economic Analysts,
Enforcement and Compliance.
[FR Doc. 2024–12170 Filed 6–3–24; 8:45 am]
BILLING CODE 3510–DS–P
PO 00000
Frm 00007
Fmt 4703
Sfmt 4703
DEPARTMENT OF COMMERCE
International Trade Administration
Renewal of the United States
Manufacturing Council
International Trade
Administration, U.S. Department of
Commerce.
ACTION: Notice of charter renewal and
recruitment.
AGENCY:
On March 22, 2024, the
charter of the United States
Manufacturing Council (Council) was
renewed for a two-year period, ending
March 22, 2026. The Council is a
Federal advisory committee under the
Federal Advisory Committee Act, as
amended.
SUMMARY:
For information on the
Council charter renewal, please visit:
https://www.facadatabase.gov/FACA/s/
FACACommittee/
a10t0000001gzmbAAA/com000200.
FOR FURTHER INFORMATION CONTACT:
Jaron Bass—telephone: 202–839–2357,
email: Jaron.Bass@trade.gov or
Cornelius Gyamfi—telephone: 202–839–
4372, email: Cornelius.Gyamfi@
trade.gov.
ADDRESSES:
Dated: May 29, 2024.
Jaron Bass,
Designated Federal Officer, Office of
Transportation and Machinery.
[FR Doc. 2024–12156 Filed 6–3–24; 8:45 am]
BILLING CODE 3510–DR–P
DEPARTMENT OF COMMERCE
National Institute of Standards and
Technology
Judges Panel of the Malcolm Baldrige
National Quality Award
National Institute of Standards
and Technology, Department of
Commerce.
ACTION: Notice of closed meeting.
AGENCY:
The Judges Panel of the
Malcolm Baldrige National Quality
Award (Judges Panel) will meet in
closed session on Thursday, June 20,
2024, from 12 p.m. to 6 p.m. eastern
time. The purpose of this meeting is to
review the results of examiners’ ratings
of Baldrige Award applications. Panel
members will vote on which applicants
merit site visits by examiners to validate
the results and resilience, as well as the
quality improvements and innovations,
claimed by applicants. The meeting is
closed to the public in order to protect
the proprietary data to be examined and
discussed.
SUMMARY:
E:\FR\FM\04JNN1.SGM
04JNN1
]]>Agencies
[Federal Register Volume 89, Number 108 (Tuesday, June 4, 2024)]
[Notices]
[Page 47898]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2024-12156]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
Renewal of the United States Manufacturing Council
AGENCY: International Trade Administration, U.S. Department of
Commerce.
ACTION: Notice of charter renewal and recruitment.
-----------------------------------------------------------------------
SUMMARY: On March 22, 2024, the charter of the United States
Manufacturing Council (Council) was renewed for a two-year period,
ending March 22, 2026. The Council is a Federal advisory committee
under the Federal Advisory Committee Act, as amended.
ADDRESSES: For information on the Council charter renewal, please
visit: https://www.facadatabase.gov/FACA/s/FACACommittee/a10t0000001gzmbAAA/com000200.
FOR FURTHER INFORMATION CONTACT: Jaron Bass--telephone: 202-839-2357,
email: [email protected] or Cornelius Gyamfi--telephone: 202-839-
4372, email: [email protected].
Dated: May 29, 2024.
Jaron Bass,
Designated Federal Officer, Office of Transportation and Machinery.
[FR Doc. 2024-12156 Filed 6-3-24; 8:45 am]
BILLING CODE 3510-DR-P
