Servicing Multi-Piece and Single Piece Rim Wheels Standard; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements, 41473-41474 [2024-10317]
Download as PDF
<![CDATA[
Federal Register / Vol. 89, No. 93 / Monday, May 13, 2024 / Notices
information collection requirements
submitted to the OMB for existing ICRs
receive a month-to-month extension
while they undergo review.
Agency: DOL–OFCCP.
Title of Collection: Contractor Portal.
OMB Control Number: 1250–0012.
Affected Public: Private Sector—
Businesses or other for-profits; Not-forprofit institutions.
Total Estimated Number of
Respondents: 98,257.
Total Estimated Number of
Responses: 98,257.
Total Estimated Annual Time Burden:
13,082 hours.
Total Estimated Annual Other Costs
Burden: $0.
(Authority: 44 U.S.C. 3507(a)(1)(D))
Wilson Vadukumcherry,
Senior Paperwork Reduction Act Analyst.
[FR Doc. 2024–10318 Filed 5–10–24; 8:45 am]
BILLING CODE 4510–CM–P
DEPARTMENT OF LABOR
Agency Information Collection
Activities; Submission for OMB
Review; Comment Request; Material
Hoists, Personnel Hoists, and
Elevators
Notice of availability; request
for comments.
ACTION:
The Department of Labor
(DOL) is submitting this Occupational
Safety & Health Administration (OSHA)sponsored information collection
request (ICR) to the Office of
Management and Budget (OMB) for
review and approval in accordance with
the Paperwork Reduction Act of 1995
(PRA). Public comments on the ICR are
invited.
DATES: The OMB will consider all
written comments that the agency
receives on or before June 12, 2024.
ADDRESSES: Written comments and
recommendations for the proposed
information collection should be sent
within 30 days of publication of this
notice to www.reginfo.gov/public/do/
PRAMain. Find this particular
information collection by selecting
‘‘Currently under 30-day Review—Open
for Public Comments’’ or by using the
search function.
FOR FURTHER INFORMATION CONTACT:
Nicole Bouchet by telephone at 202–
693–0213, or by email at DOL_PRA_
PUBLIC@dol.gov.
SUPPLEMENTARY INFORMATION: The
information collection requirements
contained in the Standard on Material
Hoists, Personnel Hoists, and Elevators
(29 CFR 1926.552) are designed to
lotter on DSK11XQN23PROD with NOTICES1
SUMMARY:
VerDate Sep<11>2014
21:33 May 10, 2024
Jkt 262001
protect workers who operate and work
around personnel hoists. For additional
substantive information about this ICR,
see the related notice published in the
Federal Register on February 26, 2024
(89 FR 14111).
Comments are invited on: (1) whether
the collection of information is
necessary for the proper performance of
the functions of the Department,
including whether the information will
have practical utility; (2) the accuracy of
the agency’s estimates of the burden and
cost of the collection of information,
including the validity of the
methodology and assumptions used; (3)
ways to enhance the quality, utility and
clarity of the information collection; and
(4) ways to minimize the burden of the
collection of information on those who
are to respond, including the use of
automated collection techniques or
other forms of information technology.
This information collection is subject
to the PRA. A Federal agency generally
cannot conduct or sponsor a collection
of information, and the public is
generally not required to respond to an
information collection, unless the OMB
approves it and displays a currently
valid OMB Control Number. In addition,
notwithstanding any other provisions of
law, no person shall generally be subject
to penalty for failing to comply with a
collection of information that does not
display a valid OMB Control Number.
See 5 CFR 1320.5(a) and 1320.6.
DOL seeks PRA authorization for this
information collection for three (3)
years. OMB authorization for an ICR
cannot be for more than three (3) years
without renewal. The DOL notes that
information collection requirements
submitted to the OMB for existing ICRs
receive a month-to-month extension
while they undergo review.
Agency: DOL–OSHA.
Title of Collection: Material Hoists,
Personnel Hoists, and Elevators.
OMB Control Number: 1218–0231.
Affected Public: Private Sector—
Businesses or other for-profits.
Total Estimated Number of
Respondents: 9,882.
Total Estimated Number of
Responses: 44,568.
Total Estimated Annual Time Burden:
11,957 hours.
Total Estimated Annual Other Costs
Burden: $0.
41473
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2011–0189]
Servicing Multi-Piece and Single Piece
Rim Wheels Standard; Extension of the
Office of Management and Budget’s
(OMB) Approval of Information
Collection (Paperwork) Requirements
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comments.
AGENCY:
Nicole Bouchet,
Certifying Official.
OSHA solicits public
comments concerning the proposal to
extend the Office of Management and
Budget’s (OMB) approval of the
information collection requirements
specified in the Servicing Multi-Piece
and Single Piece Rim Wheels Standard.
DATES: Comments must be submitted
(postmarked, sent, or received) by July
12, 2024.
ADDRESSES:
Electronically: You may submit
comments and attachments
electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for submitting
comments.
Docket: To read or download
comments or other material in the
docket, go to https://
www.regulations.gov. Documents in the
docket are listed in the https://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download through the websites.
All submissions, including copyrighted
material, are available for inspection
through the OSHA Docket Office.
Contact the OSHA Docket Office at (202)
693–2350 (TTY (877) 889–5627) for
assistance in locating docket
submissions.
Instructions: All submissions must
include the agency name and OSHA
docket number (OSHA–2011–0189) for
the Information Collection Request
(ICR). OSHA will place all comments,
including any personal information, in
the public docket, which may be made
available online. Therefore, OSHA
cautions interested parties about
submitting personal information such as
social security numbers and birthdates.
For further information on submitting
comments, see the ‘‘Public
Participation’’ heading in the section of
this notice titled SUPPLEMENTARY
INFORMATION.
[FR Doc. 2024–10320 Filed 5–10–24; 8:45 am]
FOR FURTHER INFORMATION CONTACT:
BILLING CODE 4510–26–P
Seleda Perryman, Directorate of
(Authority: 44 U.S.C. 3507(a)(1)(D))
PO 00000
Frm 00102
Fmt 4703
Sfmt 4703
SUMMARY:
E:\FR\FM\13MYN1.SGM
13MYN1
41474
Federal Register / Vol. 89, No. 93 / Monday, May 13, 2024 / Notices
Standards and Guidance, OSHA, U.S.
Department of Labor; telephone (202)
693–2222.
SUPPLEMENTARY INFORMATION:
lotter on DSK11XQN23PROD with NOTICES1
I. Background
The Department of Labor, as part of
the continuing effort to reduce
paperwork and respondent (i.e.,
employer) burden, conducts a
preclearance consultation program to
provide the public with an opportunity
to comment on proposed and
continuing information collection
requirements in accordance with the
Paperwork Reduction Act of 1995 (PRA)
(44 U.S.C. 3506(c)(2)(A)). This program
ensures that information is in the
desired format, reporting burden (time
and costs) is minimal, the collection
instruments are clearly understood, and
OSHA’s estimate of the information
collection burden is accurate. The
Occupational Safety and Health Act of
1970 (OSH Act) (29 U.S.C. 651 et seq.)
authorizes information collection by
employers as necessary or appropriate
for enforcement of the OSH Act or for
developing information regarding the
causes and prevention of occupational
injuries, illnesses, and accidents (29
U.S.C. 657). The OSH Act also requires
that OSHA obtain such information
with minimum burden upon employers,
especially those operating small
businesses, and to reduce to the
maximum extent feasible unnecessary
duplication of effort in obtaining
information (29 U.S.C. 657).
The following is a description of the
information collection requirements
contained in the standard on servicing
multi-piece and single piece rim wheels.
Certification of Repair
(§ 1910.177(d)(3)(iv))
This paragraph requires that when
restraining devices and barriers are
removed from service because they are
defective, they shall not be returned to
service until they are repaired and
reinspected. If the repair is structural,
the manufacturer or a Registered
Professional Engineer must certify that
the strength requirements specified in
(d)(3)(i) of the Standard have been met.
The certification records are used to
assure that equipment has been properly
repaired. The certification records also
provide the most efficient means for
OSHA compliance officers to determine
that an employer is complying with the
Standard.
Marking or Tagging of Wheel
Components (§ 1910.177(e)(2))
This paragraph requires that defective
wheels and wheel components ‘‘be
marked or tagged unserviceable and
VerDate Sep<11>2014
21:33 May 10, 2024
Jkt 262001
removed from the service area.’’ Under
this requirement, OSHA is providing
employers with sufficient information
from which they can derive the wording
to use in marking the object or
constructing a tag. Therefore, this
provision imposes no paperwork burden
because it falls within the portion of 5
CFR 1320.3(c)(2) that states, ‘‘The public
disclosure of information originally
supplied by the Federal government to
the recipient for the purpose of
disclosure to the public is not included
within the definition of ‘collection of
information.’’
II. Special Issues for Comment
OSHA has a particular interest in
comments on the following issues:
• Whether the proposed information
collection requirements are necessary
for the proper performance of the
agency’s functions to protect workers,
including whether the information is
useful;
• The accuracy of OSHA’s estimate of
the burden (time and costs) of the
information collection requirements,
including the validity of the
methodology and assumptions used;
• The quality, utility, and clarity of
the information collected; and
• Ways to minimize the burden on
employers who must comply; for
example, by using automated or other
technological information, and
transmission techniques.
III. Proposed Actions
OSHA is requesting that OMB extend
the approval of the information
collection requirements contained in
Servicing Multi-Piece and Single Piece
Rim Wheels Standard. The agency is
requesting that the burden remains for
one hour.
OSHA will summarize the comments
submitted in response to this notice and
will include this summary in the
request to OMB to extend the approval
of the information collection
requirements.
Type of Review: Extension of a
currently approved collection.
Title: Servicing Multi-Piece and
Single Piece Rim Wheels Standard.
OMB Control Number: 1218–0219.
Affected Public: Business or other forprofits.
Number of Respondents: 85.
Number of Responses: 9.
Frequency of Responses: On occasion.
Average Timeper Response: 5/60.
Estimated Total Burden Hours: 1.
Estimated Cost (Operation and
Maintenance): $0.
PO 00000
Frm 00103
Fmt 4703
Sfmt 9990
IV. Public Participation—Submission of
Comments on this Notice and Internet
Access to Comments and Submissions
You may submit comments in
response to this document as follows:
(1) electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal; or (2) by
facsimile (fax), if your comments,
including attachments, are not longer
than 10 pages you may fax them to the
OSHA Docket Office at (202) 693–1648.
All comments, attachments, and other
material must identify the agency name
and the OSHA docket number for the
ICR (OSHA–2011–0189). You may
supplement electronic submission by
uploading document files electronically.
Comments and submissions are
posted without change at https://
www.regulations.gov. Therefore, OSHA
cautions commenters about submitting
personal information such as social
security numbers and dates of birth.
Although all submissions are listed in
the https://www.regulations.gov index,
some information (e.g., copyrighted
material) is not publicly available to
read or download from this website. All
submission, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
Information on using the https://
www.regulations.gov website to submit
comments and access the docket is
available at the website’s ‘‘User Tips’’
link.
Contact the OSHA Docket Office at
(202) 693–2350, (TTY (877) 889–5627)
for information about materials not
available from the website, and for
assistance in using the internet to locate
docket submissions.
V. Authority and Signature
James S. Frederick, Deputy Assistant
Secretary of Labor for Occupational
Safety and Health, directed the
preparation of this notice. The authority
for this notice is the Paperwork
Reduction Act of 1995 (44 U.S.C. 3506
et seq.) and Secretary of Labor’s Order
No. 8–2020 (85 FR 58393).
Signed at Washington, DC, on May 6, 2024.
James S. Frederick,
Deputy Assistant Secretary of Labor for
Occupational Safety and Health.
[FR Doc. 2024–10317 Filed 5–10–24; 8:45 am]
BILLING CODE 4510–26–P
E:\FR\FM\13MYN1.SGM
13MYN1
]]>Agencies
[Federal Register Volume 89, Number 93 (Monday, May 13, 2024)]
[Notices]
[Pages 41473-41474]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2024-10317]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2011-0189]
Servicing Multi-Piece and Single Piece Rim Wheels Standard;
Extension of the Office of Management and Budget's (OMB) Approval of
Information Collection (Paperwork) Requirements
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Request for public comments.
-----------------------------------------------------------------------
SUMMARY: OSHA solicits public comments concerning the proposal to
extend the Office of Management and Budget's (OMB) approval of the
information collection requirements specified in the Servicing Multi-
Piece and Single Piece Rim Wheels Standard.
DATES: Comments must be submitted (postmarked, sent, or received) by
July 12, 2024.
ADDRESSES:
Electronically: You may submit comments and attachments
electronically at https://www.regulations.gov, which is the Federal
eRulemaking Portal. Follow the instructions online for submitting
comments.
Docket: To read or download comments or other material in the
docket, go to https://www.regulations.gov. Documents in the docket are
listed in the https://www.regulations.gov index; however, some
information (e.g., copyrighted material) is not publicly available to
read or download through the websites. All submissions, including
copyrighted material, are available for inspection through the OSHA
Docket Office. Contact the OSHA Docket Office at (202) 693-2350 (TTY
(877) 889-5627) for assistance in locating docket submissions.
Instructions: All submissions must include the agency name and OSHA
docket number (OSHA-2011-0189) for the Information Collection Request
(ICR). OSHA will place all comments, including any personal
information, in the public docket, which may be made available online.
Therefore, OSHA cautions interested parties about submitting personal
information such as social security numbers and birthdates.
For further information on submitting comments, see the ``Public
Participation'' heading in the section of this notice titled
SUPPLEMENTARY INFORMATION.
FOR FURTHER INFORMATION CONTACT: Seleda Perryman, Directorate of
[[Page 41474]]
Standards and Guidance, OSHA, U.S. Department of Labor; telephone (202)
693-2222.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of the continuing effort to reduce
paperwork and respondent (i.e., employer) burden, conducts a
preclearance consultation program to provide the public with an
opportunity to comment on proposed and continuing information
collection requirements in accordance with the Paperwork Reduction Act
of 1995 (PRA) (44 U.S.C. 3506(c)(2)(A)). This program ensures that
information is in the desired format, reporting burden (time and costs)
is minimal, the collection instruments are clearly understood, and
OSHA's estimate of the information collection burden is accurate. The
Occupational Safety and Health Act of 1970 (OSH Act) (29 U.S.C. 651 et
seq.) authorizes information collection by employers as necessary or
appropriate for enforcement of the OSH Act or for developing
information regarding the causes and prevention of occupational
injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also
requires that OSHA obtain such information with minimum burden upon
employers, especially those operating small businesses, and to reduce
to the maximum extent feasible unnecessary duplication of effort in
obtaining information (29 U.S.C. 657).
The following is a description of the information collection
requirements contained in the standard on servicing multi-piece and
single piece rim wheels.
Certification of Repair (Sec. 1910.177(d)(3)(iv))
This paragraph requires that when restraining devices and barriers
are removed from service because they are defective, they shall not be
returned to service until they are repaired and reinspected. If the
repair is structural, the manufacturer or a Registered Professional
Engineer must certify that the strength requirements specified in
(d)(3)(i) of the Standard have been met. The certification records are
used to assure that equipment has been properly repaired. The
certification records also provide the most efficient means for OSHA
compliance officers to determine that an employer is complying with the
Standard.
Marking or Tagging of Wheel Components (Sec. 1910.177(e)(2))
This paragraph requires that defective wheels and wheel components
``be marked or tagged unserviceable and removed from the service
area.'' Under this requirement, OSHA is providing employers with
sufficient information from which they can derive the wording to use in
marking the object or constructing a tag. Therefore, this provision
imposes no paperwork burden because it falls within the portion of 5
CFR 1320.3(c)(2) that states, ``The public disclosure of information
originally supplied by the Federal government to the recipient for the
purpose of disclosure to the public is not included within the
definition of `collection of information.''
II. Special Issues for Comment
OSHA has a particular interest in comments on the following issues:
Whether the proposed information collection requirements
are necessary for the proper performance of the agency's functions to
protect workers, including whether the information is useful;
The accuracy of OSHA's estimate of the burden (time and
costs) of the information collection requirements, including the
validity of the methodology and assumptions used;
The quality, utility, and clarity of the information
collected; and
Ways to minimize the burden on employers who must comply;
for example, by using automated or other technological information, and
transmission techniques.
III. Proposed Actions
OSHA is requesting that OMB extend the approval of the information
collection requirements contained in Servicing Multi-Piece and Single
Piece Rim Wheels Standard. The agency is requesting that the burden
remains for one hour.
OSHA will summarize the comments submitted in response to this
notice and will include this summary in the request to OMB to extend
the approval of the information collection requirements.
Type of Review: Extension of a currently approved collection.
Title: Servicing Multi-Piece and Single Piece Rim Wheels Standard.
OMB Control Number: 1218-0219.
Affected Public: Business or other for-profits.
Number of Respondents: 85.
Number of Responses: 9.
Frequency of Responses: On occasion.
Average Timeper Response: 5/60.
Estimated Total Burden Hours: 1.
Estimated Cost (Operation and Maintenance): $0.
IV. Public Participation--Submission of Comments on this Notice and
Internet Access to Comments and Submissions
You may submit comments in response to this document as follows:
(1) electronically at https://www.regulations.gov, which is the Federal
eRulemaking Portal; or (2) by facsimile (fax), if your comments,
including attachments, are not longer than 10 pages you may fax them to
the OSHA Docket Office at (202) 693-1648. All comments, attachments,
and other material must identify the agency name and the OSHA docket
number for the ICR (OSHA-2011-0189). You may supplement electronic
submission by uploading document files electronically.
Comments and submissions are posted without change at https://www.regulations.gov. Therefore, OSHA cautions commenters about
submitting personal information such as social security numbers and
dates of birth. Although all submissions are listed in the https://www.regulations.gov index, some information (e.g., copyrighted
material) is not publicly available to read or download from this
website. All submission, including copyrighted material, are available
for inspection and copying at the OSHA Docket Office. Information on
using the https://www.regulations.gov website to submit comments and
access the docket is available at the website's ``User Tips'' link.
Contact the OSHA Docket Office at (202) 693-2350, (TTY (877) 889-
5627) for information about materials not available from the website,
and for assistance in using the internet to locate docket submissions.
V. Authority and Signature
James S. Frederick, Deputy Assistant Secretary of Labor for
Occupational Safety and Health, directed the preparation of this
notice. The authority for this notice is the Paperwork Reduction Act of
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 8-2020
(85 FR 58393).
Signed at Washington, DC, on May 6, 2024.
James S. Frederick,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2024-10317 Filed 5-10-24; 8:45 am]
BILLING CODE 4510-26-P
