Antidumping Duty Order on Prestressed Concrete Steel Wire Strand From Mexico: Preliminary Affirmative Determination of Circumvention, 22668-22671 [2024-06946]
Download as PDF
22668
Federal Register / Vol. 89, No. 64 / Tuesday, April 2, 2024 / Notices
Commerce within 30 days after the date
of publication of this notice. Requests
should contain the party’s name,
address, and telephone number, the
number of participants, whether any
participant is a foreign national, and a
list of the issues to be discussed. Oral
presentations at the hearing will be
limited to issues raised in the briefs. If
a request for a hearing is made,
Commerce intends to hold the hearing
at a time and date to be determined.15
Parties should confirm by telephone the
date, time, and location of the hearing
two days before the scheduled date.
U.S. International Trade Commission
Notification
In accordance with section 703(f) of
the Act, Commerce will notify the U.S.
International Trade Commission (ITC) of
its determination. If the final
determination is affirmative, the ITC
will determine before the later of 120
days after the date of this preliminary
determination or 45 days after the final
determination whether imports of
aluminum extrusions from Indonesia
are materially injuring, or threaten
material injury to, the U.S. industry.
Notification to Interested Parties
This determination is issued and
published pursuant to sections 703(f)
and 777(i) of the Act, and 19 CFR
351.205(c).
Dated: March 25, 2024.
Abdelali Elouaradia,
Deputy Assistant Secretary for Enforcement
and Compliance.
khammond on DSKJM1Z7X2PROD with NOTICES
Appendix I
Scope of the Investigation
The scope of this investigation includes
certain frozen warmwater shrimp and prawns
whether wild-caught (ocean harvested) or
farm-raised (produced by aquaculture), headon or head-off, shell-on or peeled, tail-on or
tail-off, deveined or not deveined, cooked or
raw, or otherwise processed in frozen form.
‘‘Tails’’ in this context means the tail fan,
which includes the telson and the uropods.
The frozen warmwater shrimp and prawn
products included in the scope, regardless of
definitions in the Harmonized Tariff
Schedule of the United States (HTSUS), are
products which are processed from
warmwater shrimp and prawns through
freezing and which are sold in any count
size.
The products described above may be
processed from any species of warmwater
shrimp and prawns. Warmwater shrimp and
prawns are generally classified in, but are not
limited to, the Penaeidae family. Some
examples of the farmed and wild-caught
warmwater species include, but are not
limited to, whiteleg shrimp (Penaeus
vannemei), banana prawn (Penaeus
15 See
19 CFR 351.310(d).
VerDate Sep<11>2014
17:06 Apr 01, 2024
Jkt 262001
merguiensis), fleshy prawn (Penaeus
chinensis), giant river prawn
(Macrobrachium rosenbergii), giant tiger
prawn (Penaeus monodon), redspotted
shrimp (Penaeus brasiliensis), southern
brown shrimp (Penaeus subtilis), southern
pink shrimp (Penaeus notialis), southern
rough shrimp (Trachypenaeus curvirostris),
southern white shrimp (Penaeus schmitti),
blue shrimp (Penaeus stylirostris), western
white shrimp (Penaeus occidentalis), and
Indian white prawn (Penaeus indicus).
Frozen shrimp and prawns that are packed
with marinade, spices or sauce are included
in the scope. In addition, food preparations,
which are not ‘‘prepared meals,’’ that contain
more than 20 percent by weight of shrimp or
prawn are also included in the scope.
Excluded from the scope are: (1) breaded
shrimp and prawns (HTSUS subheading
1605.20.10.20); (2) shrimp and prawns
generally classified in the Pandalidae family
and commonly referred to as coldwater
shrimp, in any state of processing; (3) fresh
shrimp and prawns whether shell-on or
peeled (HTSUS subheadings 0306.36.0020
and 0306.36.0040); (4) shrimp and prawns in
prepared meals (HTSUS subheading
1605.20.05.10); (5) dried shrimp and prawns;
(6) canned warmwater shrimp and prawns
(HTSUS subheading 1605.20.10.40); (7)
certain dusted shrimp; and (8) certain
battered shrimp. Dusted shrimp is a shrimpbased product: (1) that is produced from
fresh (or thawed-from-frozen) and peeled
shrimp; (2) to which a ‘‘dusting’’ layer of rice
or wheat flour of at least 95 percent purity
has been applied; (3) with the entire surface
of the shrimp flesh thoroughly and evenly
coated with the flour; (4) with the nonshrimp
content of the end product constituting
between four and 10 percent of the product’s
total weight after being dusted, but prior to
being frozen; and (5) that is subjected to IQF
freezing immediately after application of the
dusting layer. Battered shrimp is a shrimpbased product that, when dusted in
accordance with the definition of dusting
above, is coated with a wet viscous layer
containing egg and/or milk, and par-fried.
The products covered by the scope are
currently classified under the following
HTSUS subheadings: 0306.17.0004,
0306.17.0005, 0306.17.0007, 0306.17.0008,
0306.17.0010, 0306.17.0011, 0306.17.0013,
0306.17.0014, 0306.17.0016, 0306.17.0017,
0306.17.0019, 0306.17.0020, 0306.17.0022,
0306.17.0023, 0306.17.0025, 0306.17.0026,
0306.17.0028, 0306.17.0029, 0306.17.0041,
0306.17.0042, 1605.21.1030, and
1605.29.1010. These HTSUS subheadings are
provided for convenience and for customs
purposes only and are not dispositive, but
rather the written description of the scope is
dispositive.
Appendix II
I. Summary
II. Background
III. Scope Comments
IV. Scope of the Investigation
V. Diversification of Ecuador’s Economy
VI. Injury Test
VII. Subsidies Valuation
VIII. Benchmarks and Discount Rates
IX. Analysis of Programs
PO 00000
Frm 00006
Fmt 4703
Sfmt 4703
X. Recommendation
[FR Doc. 2024–06949 Filed 4–1–24; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–201–831]
Antidumping Duty Order on
Prestressed Concrete Steel Wire
Strand From Mexico: Preliminary
Affirmative Determination of
Circumvention
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: The U.S. Department of
Commerce (Commerce) preliminarily
determines that imports of certain high
carbon steel (HCS) wire that are
produced in Mexico and assembled or
completed into prestressed concrete
steel wire strand (PC strand) in the
United States are circumventing the
antidumping duty (AD) order on PC
strand from Mexico. As a result, all
imports of certain HCS wire from
Mexico will be subject to suspension of
liquidation on or after July 31, 2023.
Commerce is also imposing a
certification requirement. We invite
interested parties to comment on this
preliminary determination.
DATES: Applicable April 2, 2024.
FOR FURTHER INFORMATION CONTACT:
Craig Matney or Jonathan Schueler,
Office VIII, Enforcement and
Compliance, International Trade
Administration, U.S. Department of
Commerce, 1401 Constitution Avenue
NW, Washington, DC 20230; telephone:
(202) 482–2429 or (202) 482–9175,
respectively.
SUPPLEMENTARY INFORMATION:
AGENCY:
Background
On January 28, 2004, Commerce
published in the Federal Register the
AD order on U.S. imports of PC strand
from Mexico.1 On July 31, 2023,
pursuant to section 781(a) of the Tariff
Act of 1930, as amended (the Act), and
19 CFR 351.226(d)(1), Commerce
initiated a country-wide circumvention
inquiry to determine whether imports of
HCS wire from Mexico that are
assembled or completed into PC strand
in the United States are circumventing
the Order and, accordingly, should be
covered by the scope of the Order.2 On
1 See Notice of Antidumping Duty Order:
Prestressed Concrete Steel Wire Strand from
Mexico, 69 FR 4112 (January 28, 2004) (Order).
2 See Prestressed Concrete Steel Wire Strand from
Mexico: Initiation of Circumvention Inquiry on the
E:\FR\FM\02APN1.SGM
02APN1
Federal Register / Vol. 89, No. 64 / Tuesday, April 2, 2024 / Notices
September 25, 2023, Commerce selected
Deacero S.A.P.I. de CV (Deacero) and
Aceros Camesa S.A. de C.V. (Camesa),
Mexican producers of HCS wire, as the
mandatory respondents in this
circumvention inquiry.3
On December 14, 2023, Commerce
extended the deadline for issuing the
preliminary determination in this
circumvention inquiry until March 27,
2023.4 For a complete description of the
events that followed the initiation of
this circumvention inquiry, see the
Preliminary Decision Memorandum.5
The topics included in the Preliminary
Decision Memorandum are identified in
Appendix I to this notice. The
Preliminary Decision Memorandum is a
public document and is on file
electronically via Enforcement and
Compliance’s Antidumping and
Countervailing Duty Centralized
Electronic Service System (ACCESS).
ACCESS is available to registered users
at https://access.trade.gov. In addition, a
complete version of the Preliminary
Decision Memorandum can be accessed
directly at https://access.trade.gov/
public/FRNoticesListLayout.aspx.
Scope of the Order
The merchandise covered by this
Order is PC strand. Merchandise
covered by the Order is currently
classifiable under subheadings
7312.10.3010 and 7312.10.3012 of the
Harmonized Tariff Schedule of the
United States (HTSUS). While the
HTSUS subheading and are provided for
convenience and for customs purposes,
the written description of the subject
merchandise is dispositive. For a full
description of the scope of the Order,
see the Preliminary Decision
Memorandum.
khammond on DSKJM1Z7X2PROD with NOTICES
Merchandise Subject to the
Circumvention Inquiry
This circumvention inquiry covers
certain HCS wire imported from
Antidumping Duty Order, 88 FR 49438 (July 31,
2023) (Initiation Notice). We note that in the
Initiation Notice, we stated that we are initiating
this circumvention inquiry pursuant to 19 CFR
351.226(d)(1)(ii). However, this section was
amended after the Initiation Notice was published,
therefore we reference the latest version of the
regulation. See Administrative Protective Order,
Service, and Other Procedures in Antidumping and
Countervailing Duty Proceedings, 88 FR 67069,
67078 (September 29, 2023).
3 See Memorandum, ‘‘Respondent Selection,’’
dated September 25, 2023.
4 See Memorandum, ‘‘Extension of Preliminary
Determination,’’ dated December 14, 2023.
5 See Memorandum, ‘‘Prestressed Concrete Steel
Wire Strand (PC Strand) from Mexico: Preliminary
Decision Memorandum for the Circumvention
Inquiry with Respect to High Carbon Steel Wire
Completed into PC Strand in the United States,’’
dated concurrently with, and hereby adopted by,
this notice (Preliminary Decision Memorandum).
VerDate Sep<11>2014
17:06 Apr 01, 2024
Jkt 262001
Mexico. The HCS wire has a high
carbon content (i.e., 0.60–0.85 percent),6
is not heat treated, and has a diameter
less than 4.50 millimeters. The HCS
wire is assembled or completed in the
United States by stranding the HCS wire
to produce PC strand of the type that
would be subject to the Order (inquiry
merchandise).
The inquiry merchandise is currently
classifiable under HTSUS subheading
7217.10.8090. Although the HTSUS
subheading is provided for convenience
and customs purposes, the written
description of the merchandise is
dispositive.
Importers of the subject HCS wire that
will not be converted into PC strand in
the United States may certify that the
HCS wire will not be further processed
into subject merchandise covered by the
scope of the Order. Failure to comply
with the requisite certification
requirement may result in the
merchandise being found subject to AD
duties.
Methodology
Commerce made this preliminary
circumvention determination in
accordance with section 781(a) of the
Act and 19 CFR 351.226. For a full
description of the methodology
underlying the preliminary
determination, see the Preliminary
Decision Memorandum.
Preliminary Circumvention
Determination
We preliminarily determine that PC
strand, assembled or completed in the
United States using Mexican-origin HCS
wire produced by Deacero, is
circumventing the Order. We also
preliminarily determine that Mexicanorigin HCS wire produced by Camesa is
not assembled or completed into PC
strand in the United States, and
therefore, is not circumventing the
Order.
As detailed in the Preliminary
Decision Memorandum, we also
preliminarily determine that U.S.
imports of inquiry merchandise
exported from Mexico are
circumventing the Order on a countrywide basis. As a result, we preliminarily
6 We have revised the scope of the inquiry
merchandise from that stated in the Initiation
Notice to lower the required level of carbon content
from 0.78 percent to 0.60 percent to align with the
definition of HCS wire as specified by the HTSUS
subheading for high carbon steel wire (i.e.,
7217.10.8090) because record evidence indicates
that certain merchandise being used to produce PC
strand does not fall within the parameters of the
inquiry merchandise as initiated, see Preliminary
Decision Memorandum for further details. We
invite interested parties to comment on this revised
scope of the merchandise subject to the
circumvention inquiry in their case briefs.
PO 00000
Frm 00007
Fmt 4703
Sfmt 4703
22669
determine that this merchandise is
covered by the Order.
See the ‘‘Suspension of Liquidation’’
section below for details regarding
suspension of liquidation and cash
deposit requirements. See the
‘‘Certification’’ and ‘‘Certification
Requirements’’ sections below for
details regarding the use of
certifications.
Suspension of Liquidation
Based on the preliminary affirmative
country-wide determination of
circumvention, in accordance with 19
CFR 351.226(l)(2), we will direct U.S.
Customs and Border Protection (CBP) to
suspend liquidation and require a cash
deposit of estimated duties on
unliquidated entries of HCS wire that
are produced in Mexico and assembled
or completed into PC strand in the
United States, that were entered, or
withdrawn from warehouse, for
consumption on or after July 31, 2023,
the date of publication of the initiation
of this circumvention inquiry in the
Federal Register.7
For exporters of the HCS wire that
have a company-specific cash deposit
rate under the Order, the cash deposit
rate will be the company-specific AD
cash deposit rate established for that
company in the most recently
completed segment of the PC strand
from Mexico proceeding.
If the exporter of the HCS wire from
Mexico does not have a companyspecific cash deposit rate, the AD cash
deposit rate will be the ‘‘all-others’’ rate
(62.78 percent).8 The suspension of
liquidation will remain in effect until
further notice.
Certified Entries
Entries for which the importer has
met the certification requirements
described below and in Appendix II to
this notice will not be subject to
suspension of liquidation, or the cash
deposit requirements described above.
Failure to comply with the applicable
requisite certification requirements may
result in the merchandise being subject
to AD duties.
Certification
In order to administer the preliminary
country-wide and company-specific
affirmative determinations of
circumvention for Mexico, Commerce
has established importer certifications.
These certifications will permit
importers to establish that specific
entries of HCS wire from Mexico are not
subject to suspension of liquidation or
7 See
8 See
E:\FR\FM\02APN1.SGM
Initiation Notice, 88 FR at 49438.
Order.
02APN1
22670
Federal Register / Vol. 89, No. 64 / Tuesday, April 2, 2024 / Notices
khammond on DSKJM1Z7X2PROD with NOTICES
the collection of cash deposits pursuant
to this preliminary country-wide
affirmative determination of
circumvention because the merchandise
will not be further processed into PC
strand covered by the Order (see
Appendix II to this notice).
Importers that claim that an entry of
HCS wire is not subject to suspension of
liquidation or the collection of cash
deposits based on the end-use of such
merchandise must complete the
applicable certification and meet the
certification and documentation
requirements described below, as well
as the requirements identified in the
certification.
Certification Requirements
Importers are required to complete
and maintain the applicable importer
certification and retain all supporting
documentation for the certification.
With the exception of the entries
described below, the importer
certification must be completed, signed,
and dated by the time the entry
summary is filed for the relevant entry.
The importer, or the importer’s agent,
must submit the importer’s certification
to CBP as part of the entry process by
uploading it into the document imaging
system (DIS) in ACE. Where the
importer uses a broker to facilitate the
entry process, it should obtain the entry
summary number from the broker.
Agents of the importer, such as brokers,
however, are not permitted to certify on
behalf of the importer.
Additionally, the claims made in the
certifications and any supporting
documentation are subject to
verification by Commerce and/or CBP.
Importers are required to maintain the
certifications and supporting
documentation until the later of: (1) the
date that is five years after the latest
entry date of the entries covered by the
certification; or (2) the date that is three
years after the conclusion of any
litigation in United States courts
regarding such entries.
For all shipments of HCS wire from
Mexico that were entered, or withdrawn
from warehouse, for consumption
during the period July 31, 2023 (i.e., the
date of publication of the initiation of
this circumvention inquiry in the
Federal Register), through the date of
publication of this preliminary
determination in the Federal Register,
where the entry has not been liquidated
(and entries for which liquidation has
not become final), the relevant
certification should be completed and
signed as soon as practicable, but not
later than 45 days after the date of
publication of this preliminary
determination in the Federal Register.
VerDate Sep<11>2014
17:06 Apr 01, 2024
Jkt 262001
For such entries, importers have the
option to complete a blanket
certification covering multiple entries,
individual certifications for each entry,
or a combination thereof.
For unliquidated entries (and entries
for which liquidation has not become
final) of HCS wire that were declared as
non-AD type entries (e.g., type 01) and
entered, or withdrawn from warehouse,
for consumption in the United States
during the period July 31, 2023 (the date
of initiation of this circumvention
inquiry) through the date of publication
of this preliminary determination in the
Federal Register, for which none of the
above certifications may be made,
importers must file a Post Summary
Correction with CBP, in accordance
with CBP’s regulations, regarding
conversion of such entries from non-AD
type entries to AD type entries (e.g.,
type 01 to type 03). The importer should
pay cash deposits on those entries
consistent with the regulations
governing post summary corrections
that require payment of additional
duties.
If it is determined that an importer
has not met the certification and/or
related documentation requirements for
certain entries, Commerce intends to
instruct CBP to suspend, pursuant to
this preliminary country-wide
affirmative determination of
circumvention and the Order,9 all
unliquidated entries for which these
requirements were not met and to
require the importer to post applicable
AD cash deposits equal to the rates
noted above.
Interested parties may comment in
their case briefs on these certification
requirements, and on the certification
language contained in Appendix II to
this notice.
Verification
As provided in 19 CFR 351.307,
Commerce intends to verify information
relied upon in making its final
determination.
Public Comment
Case briefs or other written comments
should be submitted to the Assistant
Secretary for Enforcement and
Compliance no later than seven days
after the date on which any verification
report is issued. Rebuttal briefs, limited
to issues raised in case briefs, may be
submitted no later than five days after
the deadline for case briefs.10 Pursuant
Order.
19 CFR 351.309(d); see also Administrative
Protective Order, Service, and Other Procedures in
Antidumping and Countervailing Duty Proceedings,
88 FR 67069 (September 29, 2023) (APO and
Service Final Rule).
to 19 CFR 351.309(c)(2) and (d)(2),
parties who submit case briefs or
rebuttal briefs in these circumvention
inquiries must submit: (1) a statement of
the issue; and (2) a table of authorities.
Case and rebuttal briefs should be filed
using ACCESS.
As provided in 19 CFR 351.309(c)(2)
and (d)(2), in prior proceedings we have
encouraged interested parties to provide
an executive summary of their brief that
should be limited to five pages total,
including footnotes. In this
circumvention inquiry, we instead
request that interested parties provide at
the beginning of their briefs a public,
executive summary for each issue raised
in their briefs.11 Further, we request that
interested parties limit their executive
summary of each issue to no more than
450 words, not including citations. We
intend to use the executive summaries
as the basis of the comment summaries
included in the issues and decision
memorandum that will accompany the
final determination in this
circumvention inquiry. We request that
interested parties include footnotes for
relevant citations in the executive
summary of each issue. Note that
Commerce has amended certain of its
requirements pertaining to the service of
documents in 19 CFR 351.303(f).12
Pursuant to 19 CFR 351.310(c),
interested parties who wish to request a
hearing, limited to issues raised in the
case and rebuttal briefs, must submit a
written request to the Assistant
Secretary for Enforcement and
Compliance, U.S. Department of
Commerce, within 30 days after the date
of publication of this notice in the
Federal Register. Requests should
contain: (1) the requesting party’s name,
address, and telephone number; (2) the
number of individuals from the
requesting party that will attend the
hearing and whether any of those
individuals is a foreign national; and (3)
a list of the issues that the party intends
to discuss at the hearing. If a request for
a hearing is made, Commerce intends to
hold the hearing at a time and date to
be determined. Parties should confirm
by telephone the date, time, and
location of the hearing two days before
the scheduled date of the hearing.
U.S. International Trade Commission
Notification
Commerce, consistent with section
781(e) of the Act, will notify the U.S.
International Trade Commission (ITC) of
this preliminary determination to
9 See
10 See
PO 00000
Frm 00008
Fmt 4703
Sfmt 4703
11 We use the term ‘‘issue’’ here to describe an
argument that Commerce would normally address
in a comment of the Issues and Decision
Memorandum.
12 See APO and Service Final Rule.
E:\FR\FM\02APN1.SGM
02APN1
Federal Register / Vol. 89, No. 64 / Tuesday, April 2, 2024 / Notices
include the merchandise subject to this
circumvention inquiry within the Order.
Pursuant to section 781(e) of the Act,
the ITC may request consultations
concerning Commerce’s proposed
inclusion of the inquiry merchandise. If,
after consultations, the ITC believes that
a significant injury issue is presented by
the proposed inclusion, it will have 60
days from the date of notification by
Commerce to provide written advice.
Notification to Interested Parties
This determination is issued and
published in accordance with section
781(a) of the Act and 19 CFR
351.226(g)(1).
Dated: March 26, 2024.
Abdelali Elouaradia,
Deputy Assistant Secretary for Enforcement
and Compliance.
Appendix I
Topics Discussed in the Preliminary
Decision Memorandum
I. Summary
II. Background
III. Scope of the Order
IV. Merchandise Subject to Circumvention
Inquiry
V. Period of the Circumvention Inquiry
VI. Statutory and Regulatory Framework for
the Circumvention Inquiry
VII. Statutory Analysis for the Circumvention
Inquiry
VIII. Summary of Statutory Analysis
IX. Country-Wide Affirmation Determination
of Circumvention and Certification
Requirements
X. Recommendation
Appendix II
khammond on DSKJM1Z7X2PROD with NOTICES
Importer Certification
I hereby certify that:
A. My name is {IMPORTING COMPANY
OFFICIAL’S NAME} and I am an official of
{NAME OF IMPORTING COMPANY},
located at {ADDRESS OF IMPORTING
COMPANY}.
B. I have direct personal knowledge of the
facts regarding the importation into the
Customs territory of the United States of
subject high-carbon steel (HCS) wire
produced in Mexico that entered under the
entry summary number(s), identified below,
and which is covered by this certification.
‘‘Direct personal knowledge’’ refers to the
facts the certifying party is expected to have
in its own records. For example, the importer
should have direct personal knowledge of the
exporter’s and/or seller’s identity and
location.
C. If the importer is acting on behalf of the
first U.S. customer, include the following
sentence as paragraph C of this certification:
The imported subject-HCS wire covered by
this certification was imported by {NAME
OF IMPORTING COMPANY} on behalf of
{NAME OF U.S. CUSTOMER}, located at
{ADDRESS OF U.S. CUSTOMER}.
VerDate Sep<11>2014
17:06 Apr 01, 2024
Jkt 262001
If the importer is not acting on behalf of
the first U.S. customer, include the following
sentence as paragraph C of this certification:
{NAME OF IMPORTING COMPANY} is
not acting on behalf of the first U.S.
customer.
D. The imported HCS wire covered by this
certification was shipped to {NAME OF
PARTY IN THE UNITED STATES TO
WHOM THE MERCHANDISE WAS FIRST
SHIPPED}, located at {U.S. ADDRESS TO
WHICH MERCHANDISE WAS SHIPPED}.
E. Select the appropriate statement below:
a. I have personal knowledge of the facts
regarding the end-use of the imported
products covered by this certification
because my company is the end-user of the
imported product covered by this
certification and I certify that the imported
subject-HCS wire will not be used to produce
subject merchandise. ‘‘Personal knowledge’’
includes facts obtained from another party,
(e.g., correspondence received by the
importer (or exporter) from the producer
regarding the source of the inputs used to
produce the imported products).
b. I have personal knowledge of the facts
regarding the end-use of the imported
product because my company is not the enduser of the imported product covered by this
certification. However, I have been able to
contact the end-user of the imported product
and confirm that it will not use this product
to produce subject merchandise. The enduser of the imported product is {COMPANY
NAME} located at {ADDRESS}. ‘‘Personal
knowledge’’ includes facts obtained from
another party (e.g., correspondence received
by the importer from the end-user of the
product).
F. The imported subject-HCS wire covered
by this certification will not be further
processed into prestressed concrete steel wire
strand (PC strand) in the United States. (Note:
For certifications related to entries made on
or after the date of publication of the
Preliminary Determination, and through 14
days after the date of publication of the
Preliminary Determination, the importer
should replace ‘‘will not be further
processed’’ with ‘‘were not further
processed’’ in the certification, as necessary).
G. This certification applies to the
following entries (repeat this block as many
times as necessary):
Entry Summary #:
Entry Summary Line Item #:
Foreign Seller:
Foreign Seller’s Address:
Foreign Seller’s Invoice #:
Foreign Seller’s Invoice Line Item #:
Producer:
Producer’s Address:
H. I understand that {NAME OF
IMPORTING COMPANY} is required to
maintain a copy of this certification and
sufficient documentation supporting this
certification (i.e., documents maintained in
the normal course of business, or documents
obtained by the certifying party, for example,
mill certificates, product specification sheets,
production records, invoices, etc.) until the
later of: (1) the date that is five years after the
PO 00000
Frm 00009
Fmt 4703
Sfmt 4703
22671
latest entry date of the entries covered by the
certification; or (2) the date that is three years
after the conclusion of any litigation in
United States courts regarding such entries.
I. I understand that {NAME OF
IMPORTING COMPANY} is required to
provide this certification and supporting
records to U.S. Customs and Border
Protection (CBP) and/or the U.S. Department
of Commerce (Commerce), upon the request
of either agency.
J. I understand that the claims made
herein, and the substantiating
documentation, are subject to verification by
CBP and/or Commerce.
K. I understand that failure to maintain the
required certifications and supporting
documentation, or failure to substantiate the
claims made herein, or not allowing CBP
and/or Commerce to verify the claims made
herein, may result in a de facto
determination that all entries to which this
certification applies are entries of
merchandise that is covered by the scope of
the antidumping duty order on PC strand
from Mexico. I understand that such a
finding will result in:
(i) suspension of liquidation of all
unliquidated entries (and entries for which
liquidation has not become final) for which
these requirements were not met;
(ii) the importer being required to post the
antidumping duty cash deposits determined
by Commerce; and
(iii) the importer no longer being allowed
to participate in the certification process.
L. I understand that agents of the importer,
such as brokers, are not permitted to make
this certification. Where a broker or other
party was used to facilitate the entry process,
{NAME OF IMPORTING COMPANY}
obtained the entry summary number and date
of entry summary from that party.
M. This certification was completed and
signed on, or prior to, the date of the entry
summary if the entry date is more than 14
days after the date of publication of the
notice of Commerce’s preliminary
determination of circumvention in the
Federal Register. If the entry date is on or
before the 14th day after the date of
publication of the notice of Commerce’s
preliminary determination of circumvention
in the Federal Register, this certification was
completed and signed by no later than 45
days after publication of the notice of
Commerce’s preliminary determination of
circumvention in the Federal Register.
N. I am aware that U.S. law (including, but
not limited to, 18 U.S.C. 1001) imposes
criminal sanctions on individuals who
knowingly and willfully make materially
false statements to the U.S. government.
Signature
{NAME OF COMPANY OFFICIAL}
{TITLE OF COMPANY OFFICIAL}
{DATE}
[FR Doc. 2024–06946 Filed 4–1–24; 8:45 am]
BILLING CODE 3510–DS–P
E:\FR\FM\02APN1.SGM
02APN1
Agencies
[Federal Register Volume 89, Number 64 (Tuesday, April 2, 2024)]
[Notices]
[Pages 22668-22671]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2024-06946]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
[A-201-831]
Antidumping Duty Order on Prestressed Concrete Steel Wire Strand
From Mexico: Preliminary Affirmative Determination of Circumvention
AGENCY: Enforcement and Compliance, International Trade Administration,
Department of Commerce.
SUMMARY: The U.S. Department of Commerce (Commerce) preliminarily
determines that imports of certain high carbon steel (HCS) wire that
are produced in Mexico and assembled or completed into prestressed
concrete steel wire strand (PC strand) in the United States are
circumventing the antidumping duty (AD) order on PC strand from Mexico.
As a result, all imports of certain HCS wire from Mexico will be
subject to suspension of liquidation on or after July 31, 2023.
Commerce is also imposing a certification requirement. We invite
interested parties to comment on this preliminary determination.
DATES: Applicable April 2, 2024.
FOR FURTHER INFORMATION CONTACT: Craig Matney or Jonathan Schueler,
Office VIII, Enforcement and Compliance, International Trade
Administration, U.S. Department of Commerce, 1401 Constitution Avenue
NW, Washington, DC 20230; telephone: (202) 482-2429 or (202) 482-9175,
respectively.
SUPPLEMENTARY INFORMATION:
Background
On January 28, 2004, Commerce published in the Federal Register the
AD order on U.S. imports of PC strand from Mexico.\1\ On July 31, 2023,
pursuant to section 781(a) of the Tariff Act of 1930, as amended (the
Act), and 19 CFR 351.226(d)(1), Commerce initiated a country-wide
circumvention inquiry to determine whether imports of HCS wire from
Mexico that are assembled or completed into PC strand in the United
States are circumventing the Order and, accordingly, should be covered
by the scope of the Order.\2\ On
[[Page 22669]]
September 25, 2023, Commerce selected Deacero S.A.P.I. de CV (Deacero)
and Aceros Camesa S.A. de C.V. (Camesa), Mexican producers of HCS wire,
as the mandatory respondents in this circumvention inquiry.\3\
---------------------------------------------------------------------------
\1\ See Notice of Antidumping Duty Order: Prestressed Concrete
Steel Wire Strand from Mexico, 69 FR 4112 (January 28, 2004)
(Order).
\2\ See Prestressed Concrete Steel Wire Strand from Mexico:
Initiation of Circumvention Inquiry on the Antidumping Duty Order,
88 FR 49438 (July 31, 2023) (Initiation Notice). We note that in the
Initiation Notice, we stated that we are initiating this
circumvention inquiry pursuant to 19 CFR 351.226(d)(1)(ii). However,
this section was amended after the Initiation Notice was published,
therefore we reference the latest version of the regulation. See
Administrative Protective Order, Service, and Other Procedures in
Antidumping and Countervailing Duty Proceedings, 88 FR 67069, 67078
(September 29, 2023).
\3\ See Memorandum, ``Respondent Selection,'' dated September
25, 2023.
---------------------------------------------------------------------------
On December 14, 2023, Commerce extended the deadline for issuing
the preliminary determination in this circumvention inquiry until March
27, 2023.\4\ For a complete description of the events that followed the
initiation of this circumvention inquiry, see the Preliminary Decision
Memorandum.\5\ The topics included in the Preliminary Decision
Memorandum are identified in Appendix I to this notice. The Preliminary
Decision Memorandum is a public document and is on file electronically
via Enforcement and Compliance's Antidumping and Countervailing Duty
Centralized Electronic Service System (ACCESS). ACCESS is available to
registered users at https://access.trade.gov. In addition, a complete
version of the Preliminary Decision Memorandum can be accessed directly
at https://access.trade.gov/public/FRNoticesListLayout.aspx.
---------------------------------------------------------------------------
\4\ See Memorandum, ``Extension of Preliminary Determination,''
dated December 14, 2023.
\5\ See Memorandum, ``Prestressed Concrete Steel Wire Strand (PC
Strand) from Mexico: Preliminary Decision Memorandum for the
Circumvention Inquiry with Respect to High Carbon Steel Wire
Completed into PC Strand in the United States,'' dated concurrently
with, and hereby adopted by, this notice (Preliminary Decision
Memorandum).
---------------------------------------------------------------------------
Scope of the Order
The merchandise covered by this Order is PC strand. Merchandise
covered by the Order is currently classifiable under subheadings
7312.10.3010 and 7312.10.3012 of the Harmonized Tariff Schedule of the
United States (HTSUS). While the HTSUS subheading and are provided for
convenience and for customs purposes, the written description of the
subject merchandise is dispositive. For a full description of the scope
of the Order, see the Preliminary Decision Memorandum.
Merchandise Subject to the Circumvention Inquiry
This circumvention inquiry covers certain HCS wire imported from
Mexico. The HCS wire has a high carbon content (i.e., 0.60-0.85
percent),\6\ is not heat treated, and has a diameter less than 4.50
millimeters. The HCS wire is assembled or completed in the United
States by stranding the HCS wire to produce PC strand of the type that
would be subject to the Order (inquiry merchandise).
---------------------------------------------------------------------------
\6\ We have revised the scope of the inquiry merchandise from
that stated in the Initiation Notice to lower the required level of
carbon content from 0.78 percent to 0.60 percent to align with the
definition of HCS wire as specified by the HTSUS subheading for high
carbon steel wire (i.e., 7217.10.8090) because record evidence
indicates that certain merchandise being used to produce PC strand
does not fall within the parameters of the inquiry merchandise as
initiated, see Preliminary Decision Memorandum for further details.
We invite interested parties to comment on this revised scope of the
merchandise subject to the circumvention inquiry in their case
briefs.
---------------------------------------------------------------------------
The inquiry merchandise is currently classifiable under HTSUS
subheading 7217.10.8090. Although the HTSUS subheading is provided for
convenience and customs purposes, the written description of the
merchandise is dispositive.
Importers of the subject HCS wire that will not be converted into
PC strand in the United States may certify that the HCS wire will not
be further processed into subject merchandise covered by the scope of
the Order. Failure to comply with the requisite certification
requirement may result in the merchandise being found subject to AD
duties.
Methodology
Commerce made this preliminary circumvention determination in
accordance with section 781(a) of the Act and 19 CFR 351.226. For a
full description of the methodology underlying the preliminary
determination, see the Preliminary Decision Memorandum.
Preliminary Circumvention Determination
We preliminarily determine that PC strand, assembled or completed
in the United States using Mexican-origin HCS wire produced by Deacero,
is circumventing the Order. We also preliminarily determine that
Mexican-origin HCS wire produced by Camesa is not assembled or
completed into PC strand in the United States, and therefore, is not
circumventing the Order.
As detailed in the Preliminary Decision Memorandum, we also
preliminarily determine that U.S. imports of inquiry merchandise
exported from Mexico are circumventing the Order on a country-wide
basis. As a result, we preliminarily determine that this merchandise is
covered by the Order.
See the ``Suspension of Liquidation'' section below for details
regarding suspension of liquidation and cash deposit requirements. See
the ``Certification'' and ``Certification Requirements'' sections below
for details regarding the use of certifications.
Suspension of Liquidation
Based on the preliminary affirmative country-wide determination of
circumvention, in accordance with 19 CFR 351.226(l)(2), we will direct
U.S. Customs and Border Protection (CBP) to suspend liquidation and
require a cash deposit of estimated duties on unliquidated entries of
HCS wire that are produced in Mexico and assembled or completed into PC
strand in the United States, that were entered, or withdrawn from
warehouse, for consumption on or after July 31, 2023, the date of
publication of the initiation of this circumvention inquiry in the
Federal Register.\7\
---------------------------------------------------------------------------
\7\ See Initiation Notice, 88 FR at 49438.
---------------------------------------------------------------------------
For exporters of the HCS wire that have a company-specific cash
deposit rate under the Order, the cash deposit rate will be the
company-specific AD cash deposit rate established for that company in
the most recently completed segment of the PC strand from Mexico
proceeding.
If the exporter of the HCS wire from Mexico does not have a
company-specific cash deposit rate, the AD cash deposit rate will be
the ``all-others'' rate (62.78 percent).\8\ The suspension of
liquidation will remain in effect until further notice.
---------------------------------------------------------------------------
\8\ See Order.
---------------------------------------------------------------------------
Certified Entries
Entries for which the importer has met the certification
requirements described below and in Appendix II to this notice will not
be subject to suspension of liquidation, or the cash deposit
requirements described above. Failure to comply with the applicable
requisite certification requirements may result in the merchandise
being subject to AD duties.
Certification
In order to administer the preliminary country-wide and company-
specific affirmative determinations of circumvention for Mexico,
Commerce has established importer certifications. These certifications
will permit importers to establish that specific entries of HCS wire
from Mexico are not subject to suspension of liquidation or
[[Page 22670]]
the collection of cash deposits pursuant to this preliminary country-
wide affirmative determination of circumvention because the merchandise
will not be further processed into PC strand covered by the Order (see
Appendix II to this notice).
Importers that claim that an entry of HCS wire is not subject to
suspension of liquidation or the collection of cash deposits based on
the end-use of such merchandise must complete the applicable
certification and meet the certification and documentation requirements
described below, as well as the requirements identified in the
certification.
Certification Requirements
Importers are required to complete and maintain the applicable
importer certification and retain all supporting documentation for the
certification. With the exception of the entries described below, the
importer certification must be completed, signed, and dated by the time
the entry summary is filed for the relevant entry. The importer, or the
importer's agent, must submit the importer's certification to CBP as
part of the entry process by uploading it into the document imaging
system (DIS) in ACE. Where the importer uses a broker to facilitate the
entry process, it should obtain the entry summary number from the
broker. Agents of the importer, such as brokers, however, are not
permitted to certify on behalf of the importer.
Additionally, the claims made in the certifications and any
supporting documentation are subject to verification by Commerce and/or
CBP. Importers are required to maintain the certifications and
supporting documentation until the later of: (1) the date that is five
years after the latest entry date of the entries covered by the
certification; or (2) the date that is three years after the conclusion
of any litigation in United States courts regarding such entries.
For all shipments of HCS wire from Mexico that were entered, or
withdrawn from warehouse, for consumption during the period July 31,
2023 (i.e., the date of publication of the initiation of this
circumvention inquiry in the Federal Register), through the date of
publication of this preliminary determination in the Federal Register,
where the entry has not been liquidated (and entries for which
liquidation has not become final), the relevant certification should be
completed and signed as soon as practicable, but not later than 45 days
after the date of publication of this preliminary determination in the
Federal Register. For such entries, importers have the option to
complete a blanket certification covering multiple entries, individual
certifications for each entry, or a combination thereof.
For unliquidated entries (and entries for which liquidation has not
become final) of HCS wire that were declared as non-AD type entries
(e.g., type 01) and entered, or withdrawn from warehouse, for
consumption in the United States during the period July 31, 2023 (the
date of initiation of this circumvention inquiry) through the date of
publication of this preliminary determination in the Federal Register,
for which none of the above certifications may be made, importers must
file a Post Summary Correction with CBP, in accordance with CBP's
regulations, regarding conversion of such entries from non-AD type
entries to AD type entries (e.g., type 01 to type 03). The importer
should pay cash deposits on those entries consistent with the
regulations governing post summary corrections that require payment of
additional duties.
If it is determined that an importer has not met the certification
and/or related documentation requirements for certain entries, Commerce
intends to instruct CBP to suspend, pursuant to this preliminary
country-wide affirmative determination of circumvention and the
Order,\9\ all unliquidated entries for which these requirements were
not met and to require the importer to post applicable AD cash deposits
equal to the rates noted above.
---------------------------------------------------------------------------
\9\ See Order.
---------------------------------------------------------------------------
Interested parties may comment in their case briefs on these
certification requirements, and on the certification language contained
in Appendix II to this notice.
Verification
As provided in 19 CFR 351.307, Commerce intends to verify
information relied upon in making its final determination.
Public Comment
Case briefs or other written comments should be submitted to the
Assistant Secretary for Enforcement and Compliance no later than seven
days after the date on which any verification report is issued.
Rebuttal briefs, limited to issues raised in case briefs, may be
submitted no later than five days after the deadline for case
briefs.\10\ Pursuant to 19 CFR 351.309(c)(2) and (d)(2), parties who
submit case briefs or rebuttal briefs in these circumvention inquiries
must submit: (1) a statement of the issue; and (2) a table of
authorities. Case and rebuttal briefs should be filed using ACCESS.
---------------------------------------------------------------------------
\10\ See 19 CFR 351.309(d); see also Administrative Protective
Order, Service, and Other Procedures in Antidumping and
Countervailing Duty Proceedings, 88 FR 67069 (September 29, 2023)
(APO and Service Final Rule).
---------------------------------------------------------------------------
As provided in 19 CFR 351.309(c)(2) and (d)(2), in prior
proceedings we have encouraged interested parties to provide an
executive summary of their brief that should be limited to five pages
total, including footnotes. In this circumvention inquiry, we instead
request that interested parties provide at the beginning of their
briefs a public, executive summary for each issue raised in their
briefs.\11\ Further, we request that interested parties limit their
executive summary of each issue to no more than 450 words, not
including citations. We intend to use the executive summaries as the
basis of the comment summaries included in the issues and decision
memorandum that will accompany the final determination in this
circumvention inquiry. We request that interested parties include
footnotes for relevant citations in the executive summary of each
issue. Note that Commerce has amended certain of its requirements
pertaining to the service of documents in 19 CFR 351.303(f).\12\
---------------------------------------------------------------------------
\11\ We use the term ``issue'' here to describe an argument that
Commerce would normally address in a comment of the Issues and
Decision Memorandum.
\12\ See APO and Service Final Rule.
---------------------------------------------------------------------------
Pursuant to 19 CFR 351.310(c), interested parties who wish to
request a hearing, limited to issues raised in the case and rebuttal
briefs, must submit a written request to the Assistant Secretary for
Enforcement and Compliance, U.S. Department of Commerce, within 30 days
after the date of publication of this notice in the Federal Register.
Requests should contain: (1) the requesting party's name, address, and
telephone number; (2) the number of individuals from the requesting
party that will attend the hearing and whether any of those individuals
is a foreign national; and (3) a list of the issues that the party
intends to discuss at the hearing. If a request for a hearing is made,
Commerce intends to hold the hearing at a time and date to be
determined. Parties should confirm by telephone the date, time, and
location of the hearing two days before the scheduled date of the
hearing.
U.S. International Trade Commission Notification
Commerce, consistent with section 781(e) of the Act, will notify
the U.S. International Trade Commission (ITC) of this preliminary
determination to
[[Page 22671]]
include the merchandise subject to this circumvention inquiry within
the Order. Pursuant to section 781(e) of the Act, the ITC may request
consultations concerning Commerce's proposed inclusion of the inquiry
merchandise. If, after consultations, the ITC believes that a
significant injury issue is presented by the proposed inclusion, it
will have 60 days from the date of notification by Commerce to provide
written advice.
Notification to Interested Parties
This determination is issued and published in accordance with
section 781(a) of the Act and 19 CFR 351.226(g)(1).
Dated: March 26, 2024.
Abdelali Elouaradia,
Deputy Assistant Secretary for Enforcement and Compliance.
Appendix I
Topics Discussed in the Preliminary Decision Memorandum
I. Summary
II. Background
III. Scope of the Order
IV. Merchandise Subject to Circumvention Inquiry
V. Period of the Circumvention Inquiry
VI. Statutory and Regulatory Framework for the Circumvention Inquiry
VII. Statutory Analysis for the Circumvention Inquiry
VIII. Summary of Statutory Analysis
IX. Country-Wide Affirmation Determination of Circumvention and
Certification Requirements
X. Recommendation
Appendix II
Importer Certification
I hereby certify that:
A. My name is {IMPORTING COMPANY OFFICIAL'S NAME{time} and I am
an official of {NAME OF IMPORTING COMPANY{time} , located at
{ADDRESS OF IMPORTING COMPANY{time} .
B. I have direct personal knowledge of the facts regarding the
importation into the Customs territory of the United States of
subject high-carbon steel (HCS) wire produced in Mexico that entered
under the entry summary number(s), identified below, and which is
covered by this certification. ``Direct personal knowledge'' refers
to the facts the certifying party is expected to have in its own
records. For example, the importer should have direct personal
knowledge of the exporter's and/or seller's identity and location.
C. If the importer is acting on behalf of the first U.S.
customer, include the following sentence as paragraph C of this
certification:
The imported subject-HCS wire covered by this certification was
imported by {NAME OF IMPORTING COMPANY{time} on behalf of {NAME OF
U.S. CUSTOMER{time} , located at {ADDRESS OF U.S. CUSTOMER{time} .
If the importer is not acting on behalf of the first U.S.
customer, include the following sentence as paragraph C of this
certification:
{NAME OF IMPORTING COMPANY{time} is not acting on behalf of the
first U.S. customer.
D. The imported HCS wire covered by this certification was
shipped to {NAME OF PARTY IN THE UNITED STATES TO WHOM THE
MERCHANDISE WAS FIRST SHIPPED{time} , located at {U.S. ADDRESS TO
WHICH MERCHANDISE WAS SHIPPED{time} .
E. Select the appropriate statement below:
a. I have personal knowledge of the facts regarding the end-use
of the imported products covered by this certification because my
company is the end-user of the imported product covered by this
certification and I certify that the imported subject-HCS wire will
not be used to produce subject merchandise. ``Personal knowledge''
includes facts obtained from another party, (e.g., correspondence
received by the importer (or exporter) from the producer regarding
the source of the inputs used to produce the imported products).
b. I have personal knowledge of the facts regarding the end-use
of the imported product because my company is not the end-user of
the imported product covered by this certification. However, I have
been able to contact the end-user of the imported product and
confirm that it will not use this product to produce subject
merchandise. The end-user of the imported product is {COMPANY
NAME{time} located at {ADDRESS{time} . ``Personal knowledge''
includes facts obtained from another party (e.g., correspondence
received by the importer from the end-user of the product).
F. The imported subject-HCS wire covered by this certification
will not be further processed into prestressed concrete steel wire
strand (PC strand) in the United States. (Note: For certifications
related to entries made on or after the date of publication of the
Preliminary Determination, and through 14 days after the date of
publication of the Preliminary Determination, the importer should
replace ``will not be further processed'' with ``were not further
processed'' in the certification, as necessary).
G. This certification applies to the following entries (repeat
this block as many times as necessary):
Entry Summary #:
Entry Summary Line Item #:
Foreign Seller:
Foreign Seller's Address:
Foreign Seller's Invoice #:
Foreign Seller's Invoice Line Item #:
Producer:
Producer's Address:
H. I understand that {NAME OF IMPORTING COMPANY{time} is
required to maintain a copy of this certification and sufficient
documentation supporting this certification (i.e., documents
maintained in the normal course of business, or documents obtained
by the certifying party, for example, mill certificates, product
specification sheets, production records, invoices, etc.) until the
later of: (1) the date that is five years after the latest entry
date of the entries covered by the certification; or (2) the date
that is three years after the conclusion of any litigation in United
States courts regarding such entries.
I. I understand that {NAME OF IMPORTING COMPANY{time} is
required to provide this certification and supporting records to
U.S. Customs and Border Protection (CBP) and/or the U.S. Department
of Commerce (Commerce), upon the request of either agency.
J. I understand that the claims made herein, and the
substantiating documentation, are subject to verification by CBP
and/or Commerce.
K. I understand that failure to maintain the required
certifications and supporting documentation, or failure to
substantiate the claims made herein, or not allowing CBP and/or
Commerce to verify the claims made herein, may result in a de facto
determination that all entries to which this certification applies
are entries of merchandise that is covered by the scope of the
antidumping duty order on PC strand from Mexico. I understand that
such a finding will result in:
(i) suspension of liquidation of all unliquidated entries (and
entries for which liquidation has not become final) for which these
requirements were not met;
(ii) the importer being required to post the antidumping duty
cash deposits determined by Commerce; and
(iii) the importer no longer being allowed to participate in the
certification process.
L. I understand that agents of the importer, such as brokers,
are not permitted to make this certification. Where a broker or
other party was used to facilitate the entry process, {NAME OF
IMPORTING COMPANY{time} obtained the entry summary number and date
of entry summary from that party.
M. This certification was completed and signed on, or prior to,
the date of the entry summary if the entry date is more than 14 days
after the date of publication of the notice of Commerce's
preliminary determination of circumvention in the Federal Register.
If the entry date is on or before the 14th day after the date of
publication of the notice of Commerce's preliminary determination of
circumvention in the Federal Register, this certification was
completed and signed by no later than 45 days after publication of
the notice of Commerce's preliminary determination of circumvention
in the Federal Register.
N. I am aware that U.S. law (including, but not limited to, 18
U.S.C. 1001) imposes criminal sanctions on individuals who knowingly
and willfully make materially false statements to the U.S.
government.
Signature
{NAME OF COMPANY OFFICIAL{time}
{TITLE OF COMPANY OFFICIAL{time}
{DATE{time}
[FR Doc. 2024-06946 Filed 4-1-24; 8:45 am]
BILLING CODE 3510-DS-P