Mattresses From Bulgaria: Preliminary Affirmative Determination of Sales at Less Than Fair Value, 15136-15139 [2024-04326]
Download as PDF
15136
Federal Register / Vol. 89, No. 42 / Friday, March 1, 2024 / Notices
ddrumheller on DSK120RN23PROD with NOTICES1
issues raised in the case briefs, may be
filed not later than five days after the
date for filing case briefs.10 Interested
parties who submit case briefs or
rebuttal briefs in this proceeding must
submit: (1) a table of contents listing
each issue; and (2) a table of
authorities.11
As provided under 19 CFR
351.309(c)(2) and (d)(2), in prior
proceedings we have encouraged
interested parties to provide an
executive summary of their brief that
should be limited to five pages total,
including footnotes. In this
investigation, we instead request that
interested parties provide at the
beginning of their briefs a public,
executive summary for each issue raised
in their briefs.12 Further, we request that
interested parties limit their executive
summary of each issue to no more than
450 words, not including citations. We
intend to use the executive summaries
as the basis of the comment summaries
included in the issues and decision
memorandum that will accompany the
final determination in this investigation.
We request that interested parties
include footnotes for relevant citations
in the executive summary of each issue.
Note that Commerce has amended
certain of its requirements pertaining to
the service of documents in 19 CFR
351.303(f).13
Pursuant to 19 CFR 351.310(c),
interested parties who wish to request a
hearing, limited to issues raised in the
case and rebuttal briefs, must submit a
written request to the Assistant
Secretary for Enforcement and
Compliance, U.S. Department of
Commerce via ACCESS within 30 days
after the date of publication of this
notice. Requests should contain the
party’s name, address, and telephone
number, the number of participants, and
a list of the issues to be discussed. Oral
presentations at the hearing will be
limited to issues raised in the briefs. If
a request for a hearing is made, parties
will be notified of the time and date for
the hearing.14
10 See 19 CFR 351.309(d); see also Administrative
Protective Order, Service, and Other Procedures in
Antidumping and Countervailing Duty Proceedings,
88 FR 67069, 67077 (September 29, 2023) (APO and
Service Final Rule).
11 See 19 CFR 351.309(c)(2) and (d)(2).
12 We use the term ‘‘issue’’ here to describe an
argument that Commerce would normally address
in a comment of the Issues and Decision
Memorandum.
13 See APO and Service Final Rule, 88 FR at
67069.
14 See 19 CFR 351.310(d).
VerDate Sep<11>2014
21:28 Feb 29, 2024
Jkt 262001
U.S. International Trade Commission
Notification
In accordance with section 703(f) of
the Act, Commerce will notify the U.S.
International Trade Commission (ITC) of
its determination. If the final
determination is affirmative, the ITC
will determine before the later of 120
days after the date of this preliminary
determination or 45 days after the final
determination.
Notification to Interested Parties
This determination is issued and
published pursuant to sections 703(f)
and 777(i) of the Act and 19 CFR
351.205(c).
Dated: February 26, 2024.
Ryan Majerus,
Deputy Assistant Secretary for Policy and
Negotiations, performing the non-exclusive
functions and duties of the Assistant
Secretary for Enforcement and Compliance.
Appendix I
Scope of the Investigation
The merchandise covered by this
investigation is aluminum lithographic
printing plates. Aluminum lithographic
printing plates consist of a flat substrate
containing at least 90 percent aluminum. The
aluminum-containing substrate is generally
treated using a mechanical, electrochemical,
or chemical graining process, which is
followed by one or more anodizing
treatments that form a hydrophilic layer on
the aluminum-containing substrate. An
image-recording, oleophilic layer that is
sensitive to light, including but not limited
to ultra-violet, visible, or infrared, is
dispersed in a polymeric binder material that
is applied on top of the hydrophilic layer,
generally on one side of the aluminum
lithographic printing plate. The oleophilic
light-sensitive layer is capable of capturing
an image that is transferred onto the plate by
either light or heat. The image applied to an
aluminum lithographic printing plate
facilitates the production of newspapers,
magazines, books, yearbooks, coupons,
packaging, and other printed materials
through an offset printing process, where an
aluminum lithographic printing plate
facilitates the transfer of an image onto the
printed media. Aluminum lithographic
printing plates within the scope of this
investigation include all aluminum
lithographic printing plates, irrespective of
the dimensions or thickness of the
underlying aluminum substrate, whether the
plate requires processing after an image is
applied to the plate, whether the plate is
ready to be mounted to a press and used in
printing operations immediately after an
image is applied to the plate, or whether the
plate has been exposed to light or heat to
create an image on the plate or remains
unexposed and is free of any image.
Subject merchandise also includes
aluminum lithographic printing plates
produced from an aluminum sheet coil that
has been coated with a light-sensitive imagerecording layer in a subject country and that
PO 00000
Frm 00021
Fmt 4703
Sfmt 4703
is subsequently unwound and cut to the final
dimensions to produce a finished plate in a
third country (including the United States),
or exposed to light or heat to create an image
on the plate in a third country (including in
a foreign trade zone within the United
States).
Excluded from the scope of this
investigation are lithographic printing plates
manufactured using a substrate produced
from a material other than aluminum, such
as rubber or plastic.
Aluminum lithographic printing plates are
currently classifiable under Harmonized
Tariff of the United States (HTSUS)
subheadings 3701.30.0000 and 3701.99.6060.
Further, merchandise that falls within the
scope of this investigation may also be
entered into the United States under HTSUS
subheadings 3701.99.3000 and 8442.50.1000.
Although the HTSUS subheadings are
provided for convenience and customs
purposes, the written description of the
scope of this investigation is dispositive.
Appendix II
List of Topics Discussed in the Preliminary
Decision Memorandum
I. Summary
II. Background
III. Injury Test
IV. Analysis of China’s Financial System
V. Diversification of China’s Economy
VI. Use of Facts Otherwise Available and
Adverse Inferences
VII. Subsidies Valuation
VIII. Benchmarks and Interest Rates
IX. Analysis of Programs
X. Recommendation
[FR Doc. 2024–04392 Filed 2–29–24; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–487–001]
Mattresses From Bulgaria: Preliminary
Affirmative Determination of Sales at
Less Than Fair Value
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: The U.S. Department of
Commerce (Commerce) preliminarily
determines that mattresses from
Bulgaria are being, or are likely to be,
sold in the United States at less than fair
value (LTFV). The period of
investigation (POI) is July 1, 2022,
through June 30, 2023. Interested parties
are invited to comment on this
preliminary determination.
DATES: Applicable March 1, 2024.
FOR FURTHER INFORMATION CONTACT: T.J.
Worthington, AD/CVD Operations,
Office III, Enforcement and Compliance,
International Trade Administration,
U.S. Department of Commerce, 1401
AGENCY:
E:\FR\FM\01MRN1.SGM
01MRN1
15137
Federal Register / Vol. 89, No. 42 / Friday, March 1, 2024 / Notices
Constitution Avenue NW, Washington,
DC 20230; telephone: (202) 482–4567.
SUPPLEMENTARY INFORMATION:
Background
This preliminary determination is
made in accordance with section 733(b)
of the Tariff Act of 1930, as amended
(the Act). Commerce published the
notice of initiation of this investigation
on August 23, 2023.1 On October 23,
2023, Commerce postponed the
preliminary determination of this
investigation until February 23, 2024.2
For a complete description of the
events that followed the initiation of
this investigation, see the Preliminary
Decision Memorandum.3 A list of topics
included in the Preliminary Decision
Memorandum is included as Appendix
II to this notice. The Preliminary
Decision Memorandum is a public
document and is on file electronically
via Enforcement and Compliance’s
Antidumping and Countervailing Duty
Centralized Electronic Service System
(ACCESS). ACCESS is available to
registered users at https://
access.trade.gov. In addition, a complete
version of the Preliminary Decision
Memorandum can be accessed directly
at https://access.trade.gov/public/
FRNoticesListLayout.aspx.
Scope of the Investigation
The products covered by this
investigation are mattresses from
Bulgaria. For a complete description of
the scope of this investigation, see
Appendix I.
Scope Comments
ddrumheller on DSK120RN23PROD with NOTICES1
In accordance with the Preamble,4 we
set aside a period of time for parties to
raise issues regarding product coverage
(i.e., scope).5 Certain interested parties
commented on the scope of the
investigation as it appeared in the
Initiation Notice. For a summary of the
product coverage comments and
1 See Mattresses from Bosnia and Herzegovina,
Bulgaria, Burma, India, Italy, Kosovo, Mexico, the
Philippines, Poland, Slovenia, Spain, and Taiwan:
Initiation of Less-Than-Fair-Value Investigations, 88
FR 57433 (August 23, 2023) (Initiation Notice).
2 See Mattresses from Bosnia and Herzegovina,
Bulgaria, Burma, India, Italy, Kosovo, Mexico, the
Philippines, Poland, Slovenia, Spain, and Taiwan:
Postponement of Preliminary Determinations in the
Less-Than-Fair Value Investigations, 88 FR 72737
(October 23, 2023).
3 See Memorandum, ‘‘Decision Memorandum for
the Preliminary Affirmative Determination in the
Less-Than-Fair-Value Investigation of Mattresses
from Bulgaria,’’ dated concurrently with, and
hereby adopted by this notice (Preliminary Decision
Memorandum).
4 See Antidumping Duties; Countervailing Duties;
Final Rule, 62 FR 27296, 27323 (May 19, 1997)
(Preamble).
5 See Initiation Notice, 88 FR at 57434.
VerDate Sep<11>2014
21:28 Feb 29, 2024
Jkt 262001
rebuttal responses submitted to the
record for this preliminary
determination and accompanying
discussion and analysis of all comments
timely received, see the Preliminary
Scope Decision Memorandum.6
Commerce is not preliminarily
modifying the scope language as it
appeared in the Initiation Notice. See
the scope in Appendix I to this notice.
In the Preliminary Scope Decision
Memorandum, Commerce established
the deadline for parties to submit scope
case and rebuttal briefs.7
Methodology
Commerce is conducting this
investigation in accordance with section
731 of the Act. Pursuant to sections
776(a) and (b) of the Act, Commerce has
preliminarily relied upon the facts
otherwise available with adverse
inferences for BRN Sleep Products and
Fumeibai Industrial Co., Ltd. For a full
description of the methodology
underlying the preliminary
determination, see the Preliminary
Decision Memorandum.
All-Others Rate
Sections 733(d)(1)(A)(ii) and
735(c)(5)(A) of the Act provide that in
the preliminary determination,
Commerce shall determine an estimated
all-others rate for all exporters and
producers not individually examined.
This rate shall be an amount equal to
the weighted average of the estimated
weighted-average dumping margins
established for exporters and producers
individually investigated, excluding any
zero and de minimis margins, and any
margins determined entirely under
section 776 of the Act.
Pursuant to section 735(c)(5)(B) of the
Act, if the estimated weighted-average
dumping margins established for all
exporters and producers individually
examined are zero, de minimis or
determined based entirely on facts
otherwise available, Commerce may use
any reasonable method to establish the
estimated weighted-average dumping
margin for all-other producers or
exporters. Commerce has preliminarily
determined the estimated weightedaverage dumping margin for each of the
individually examined respondents
under section 776 of the Act. Although,
pursuant to section 735(c)(5)(B) of the
6 See Memorandum, ‘‘Mattresses from Bosnia and
Herzegovina, Bulgaria, Burma, India, Indonesia,
Italy, Kosovo, Mexico, Philippines, Poland,
Slovenia, Spain, and Taiwan: Scope Comments
Decision Memorandum for the Preliminary
Determination,’’ dated concurrently with this
preliminary determination (Preliminary Scope
Decision Memorandum).
7 Id.
PO 00000
Frm 00022
Fmt 4703
Sfmt 4703
Act, Commerce’s normal practice under
these circumstances has been to
calculate the all-others rate as a simple
average of the alleged dumping margins
from the petition,8 the petitioners
calculated only one estimated dumping
margin in the petition (i.e., 106.27
percent).9 Therefore, consistent with
Commerce’s practice, we have
preliminarily assigned the dumping
margin of 106.27 percent as the allothers rate in this investigation.
Preliminary Determination
Commerce preliminarily determines
that the following estimated weightedaverage dumping margins exist:
Producer/exporter
Estimated
weightedaverage
dumping
margin
(percent)
BRN Sleep Products ............
Fumeibai Industrial Co., Ltd
All Others ..............................
* 106.27
* 106.27
106.27
* Adverse Facts Available (AFA).
Suspension of Liquidation
In accordance with section 733(d)(2)
of the Act, Commerce will direct U.S.
Customs and Border Protection (CBP) to
suspend liquidation of entries of subject
merchandise, as described in Appendix
I, entered, or withdrawn from
warehouse, for consumption on or after
the date of publication of this notice in
the Federal Register. Further, pursuant
to section 733(d)(1)(B) of the Act and 19
CFR 351.205(d), Commerce will instruct
CBP to require a cash deposit equal to
the estimated weighted-average
dumping margin or the estimated allothers rate, as follows: (1) the cash
deposit rate for the respondents listed
above will be equal to the companyspecific estimated weighted-average
dumping margins determined in this
preliminary determination; (2) if the
8 See, e.g., Notice of Preliminary Determination of
Sales at Less Than Fair Value: Sodium Nitrite from
the Federal Republic of Germany, 73 FR 21909,
21912 (April 23, 2008), unchanged in Notice of
Final Determination of Sales at Less Than Fair
Value: Sodium Nitrite from the Federal Republic of
Germany, 73 FR 38986, 38987 (July 8, 2008), and
accompanying Issues and Decision Memorandum at
Comment 2; see also Notice of Final Determination
of Sales at Less Than Fair Value: Raw Flexible
Magnets from Taiwan, 73 FR 39673, 39674 (July 10,
2008); Steel Threaded Rod from Thailand:
Preliminary Determination of Sales at Less Than
Fair Value and Affirmative Preliminary
Determination of Critical Circumstances, 78 FR
79670, 79671 (December 31, 2013), unchanged in
Steel Threaded Rod from Thailand: Final
Determination of Sales at Less Than Fair Value and
Affirmative Final Determination of Critical
Circumstances, 79 FR 14476, 14477 (March 14,
2014).
9 See Initiation Notice, 88 FR at 57436.
E:\FR\FM\01MRN1.SGM
01MRN1
15138
Federal Register / Vol. 89, No. 42 / Friday, March 1, 2024 / Notices
exporter is not a respondent identified
above, but the producer is, then the cash
deposit rate will be equal to the
company-specific estimated weightedaverage dumping margin established for
that producer of the subject
merchandise; and (3) the cash deposit
rate for all other producers and
exporters will be equal to the all-others
estimated weighted-average dumping
margin. These suspension of liquidation
instructions will remain in effect until
further notice.
Disclosure
Normally, Commerce discloses to
interested parties the calculations
performed in connection with a
preliminary determination within five
days of any public announcement or, if
there is no public announcement,
within five days of the date of
publication of the notice of preliminary
determination in the Federal Register,
in accordance with 19 CFR 351.224(b).
However, because Commerce
preliminarily applied AFA to the
individually examined companies in
this investigation, in accordance with
section 776 of the Act, and the applied
AFA rate is based solely on the petition,
there are no calculations to disclose.
Verification
Because the individually examined
respondents in this investigation did not
provide information requested by
Commerce, and Commerce
preliminarily determines each of the
examined respondents to have been
uncooperative, we will not conduct
verification.
Public Comment
ddrumheller on DSK120RN23PROD with NOTICES1
Case briefs or other written comments
may be submitted to the Assistant
Secretary for Enforcement and
Compliance no later than 30 days after
the date of publication of the
preliminary determination.10 Rebuttal
briefs, limited to issues raised in the
case briefs, may be filed not later than
five days after the date for filing case
briefs.11 Interested parties who submit
case briefs or rebuttal briefs in this
proceeding must submit: (1) a table of
contents listing each issue; and (2) a
table of authorities.12
As provided under 19 CFR
351.309(c)(2) and (d)(2), in prior
10 Commerce is exercising its discretion under 19
CFR 351.309(c)(1)(i) to alter the time limit for the
filing of case briefs.
11 See 19 CFR 351.309(d); see also Administrative
Protective Order, Service, and Other Procedures in
Antidumping and Countervailing Duty Proceedings,
88 FR 67069, 67077 (September 29, 2023) (APO and
Service Final Rule).
12 See 19 CFR 351.309(c)(2) and (d)(2).
VerDate Sep<11>2014
21:28 Feb 29, 2024
Jkt 262001
proceedings we have encouraged
interested parties to provide an
executive summary of their brief that
should be limited to five pages total,
including footnotes. In this
investigation, we instead request that
interested parties provide at the
beginning of their briefs a public,
executive summary for each issue raised
in their briefs.13 Further, we request that
interested parties limit their executive
summary of each issue to no more than
450 words, not including citations. We
intend to use the executive summaries
as the basis of the comment summaries
included in the issues and decision
memorandum that will accompany the
final determination in this investigation.
We request that interested parties
include footnotes for relevant citations
in the executive summary of each issue.
Note that Commerce has amended
certain of its requirements pertaining to
the service of documents in 19 CFR
351.303(f).14
Pursuant to 19 CFR 351.310(c),
interested parties who wish to request a
hearing, limited to issues raised in the
case and rebuttal briefs, must submit a
written request to the Assistant
Secretary for Enforcement and
Compliance, U.S. Department of
Commerce, within 30 days after the date
of publication of this notice. Requests
should contain the party’s name,
address, and telephone number, the
number of participants, and a list of the
issues to be discussed. If a request for
a hearing is made, Commerce will
inform parties of the time and date for
the hearing.
Final Determination
Section 735(a)(1) of the Act and 19
CFR 351.210(b)(1) provide that
Commerce will issue the final
determination within 75 days after the
date of its preliminary determination.
Accordingly, Commerce will make its
final determination no later than 75
days after the signature date of this
preliminary determination.
U.S. International Trade Commission
Notification
In accordance with section 733(f) of
the Act, Commerce will notify the U.S.
International Trade Commission (ITC) of
its preliminary determination. If the
final determination is affirmative, the
ITC will determine within the later of
120 days after the date of this
preliminary determination or 45 days
after the final determination whether
13 We use the term ‘‘issue’’ here to describe an
argument that Commerce would normally address
in a comment of the Issues and Decision
Memorandum.
14 See APO and Service Final Rule.
PO 00000
Frm 00023
Fmt 4703
Sfmt 4703
these imports are materially injuring, or
threaten material injury to, the U.S.
industry.
Notification to Interested Parties
This determination is issued and
published in accordance with sections
733(f) and 777(i)(1) of the Act and 19
CFR 351.205(c).
Dated: February 23, 2024.
Ryan Majerus,
Deputy Assistant Secretary for Policy and
Negotiations, performing the non-exclusive
functions and duties of the Assistant
Secretary for Enforcement and Compliance.
Appendix I
Scope of the Investigation
The products covered by this investigation
are all types of youth and adult mattresses.
The term ‘‘mattress’’ denotes an assembly of
materials that at a minimum includes a
‘‘core,’’ which provides the main support
system of the mattress, and may consist of
innersprings, foam, other resilient filling, or
a combination of these materials. Mattresses
also may contain: (1) ‘‘upholstery,’’ the
material between the core and the top panel
of the ticking on a single-sided mattress, or
between the core and the top and bottom
panel of the ticking on a double-sided
mattress; and/or (2) ‘‘ticking,’’ the outermost
layer of fabric or other material (e.g., vinyl)
that encloses the core and any upholstery,
also known as a cover.
The scope of this investigation is restricted
to only ‘‘adult mattresses’’ and ‘‘youth
mattresses.’’ ‘‘Adult mattresses’’ are
frequently described as ‘‘twin,’’ ‘‘extra-long
twin,’’ ‘‘full,’’ ‘‘queen,’’ ‘‘king,’’ or ‘‘California
king’’ mattresses. ‘‘Youth mattresses’’ are
typically described as ‘‘crib,’’ ‘‘toddler,’’ or
‘‘youth’’ mattresses. All adult and youth
mattresses are included regardless of size and
size description or how they are described
(e.g., frameless futon mattress and tri-fold
mattress).
The scope encompasses all types of
‘‘innerspring mattresses,’’ ‘‘non-innerspring
mattresses,’’ and ‘‘hybrid mattresses.’’
‘‘Innerspring mattresses’’ contain
innersprings, a series of metal springs joined
together in sizes that correspond to the
dimensions of mattresses. Mattresses that
contain innersprings are referred to as
‘‘innerspring mattresses’’ or ‘‘hybrid
mattresses.’’ ‘‘Hybrid mattresses’’ contain two
or more support systems as the core, such as
layers of both memory foam and innerspring
units.
‘‘Non-innerspring mattresses’’ are those
that do not contain any innerspring units.
They are generally produced from foams
(e.g., polyurethane, memory (viscoelastic),
latex foam, gel infused viscoelastic (gel
foam), thermobonded polyester,
polyethylene) or other resilient filling.
Mattresses covered by the scope of this
investigation may be imported
independently, as part of furniture or
furniture mechanisms (e.g., convertible sofa
bed mattresses, sofa bed mattresses imported
with sofa bed mechanisms, corner group
mattresses, day-bed mattresses, roll-away bed
E:\FR\FM\01MRN1.SGM
01MRN1
15139
Federal Register / Vol. 89, No. 42 / Friday, March 1, 2024 / Notices
mattresses, high risers, trundle bed
mattresses, crib mattresses), or as part of a set
(in combination with a ‘‘mattress
foundation’’). ‘‘Mattress foundations’’ are any
base or support for a mattress. Mattress
foundations are commonly referred to as
‘‘foundations,’’ ‘‘boxsprings,’’ ‘‘platforms,’’
and/or ‘‘bases.’’ Bases can be static, foldable,
or adjustable. Only the mattress is covered by
the scope if imported as part of furniture,
with furniture mechanisms, or as part of a
set, in combination with a mattress
foundation.
Excluded from the scope of this
investigation are ‘‘futon’’ mattresses. A
‘‘futon’’ is a bi-fold frame made of wood,
metal, or plastic material, or any combination
thereof, that functions as both seating
furniture (such as a couch, love seat, or sofa)
and a bed. A ‘‘futon mattress’’ is a tufted
mattress, where the top covering is secured
to the bottom with thread that goes
completely through the mattress from the top
through to the bottom, and it does not
contain innersprings or foam. A futon
mattress is both the bed and seating surface
for the futon.
Also excluded from the scope are airbeds
(including inflatable mattresses) and
waterbeds, which consist of air- or liquidfilled bladders as the core or main support
system of the mattress.
Also excluded is certain multifunctional
furniture that is convertible from seating to
sleeping, regardless of filler material or
components, where such filler material or
components are upholstered, integrated into
the design and construction of, and
inseparable from, the furniture framing, and
the outermost layer of the multifunctional
furniture converts into the sleeping surface.
Such furniture may, and without limitation,
be commonly referred to as ‘‘convertible
sofas,’’ ‘‘sofabeds,’’ ‘‘sofa chaise sleepers,’’
‘‘futons,’’ ‘‘ottoman sleepers,’’ or a like
description.
Also excluded from the scope of this
investigation are any products covered by the
existing antidumping duty orders on
uncovered innerspring units from the
People’s Republic of China, South Africa,
and the Socialist Republic of Vietnam. See
Uncovered Innerspring Units from the
People’s Republic of China, South Africa,
and Socialist Republic of Vietnam:
Continuation of Antidumping Duty Orders,
84 FR 55285 (October 16, 2019).
ddrumheller on DSK120RN23PROD with NOTICES1
DOC case No.
Also excluded from the scope of this
investigation are bassinet pads with a
nominal length of less than 39 inches, a
nominal width of less than 25 inches, and a
nominal depth of less than 2 inches.
Additionally, also excluded from the scope
of this investigation are ‘‘mattress toppers.’’
A ‘‘mattress topper’’ is a removable bedding
accessory that supplements a mattress by
providing an additional layer that is placed
on top of a mattress. Excluded mattress
toppers have a height of four inches or less.
The products subject to this investigation
are currently classifiable under Harmonized
Tariff Schedule of the United States (HTSUS)
subheadings: 9404.21.0010, 9404.21.0013,
9404.21.0095, 9404.29.1005, 9404.29.1013,
9404.29.1095, 9404.29.9085, 9404.29.9087,
and 9404.29.9095. Products subject to this
investigation may also enter under HTSUS
subheadings: 9401.41.0000, 9401.49.0000,
and 9401.99.9081. Although the HTSUS
subheadings are provided for convenience
and customs purposes, the written
description of the merchandise subject to this
investigation is dispositive.
Appendix II
List of Topics Discussed in the Preliminary
Decision Memorandum
I. Summary
II. Background
III. Period of Investigation
IV. Use of Facts Available With Adverse
Inferences
V. Recommendation
[FR Doc. 2024–04326 Filed 2–29–24; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
Initiation of Five-Year (Sunset)
Reviews
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: In accordance with the Tariff
Act of 1930, as amended (the Act), the
U.S. Department of Commerce
(Commerce) is automatically initiating
AGENCY:
ITC case No.
the five-year reviews (Sunset Reviews)
of the antidumping and countervailing
duty (AD/CVD) order(s) and suspended
investigation(s) listed below. The U.S.
International Trade Commission (ITC) is
publishing concurrently with this notice
its notice of Institution of Five-Year
Reviews which covers the same order(s)
and suspended investigation(s).
DATES:
Applicable March 1, 2024.
FOR FURTHER INFORMATION CONTACT:
Commerce official identified in the
Initiation of Review section below at
AD/CVD Operations, Enforcement and
Compliance, International Trade
Administration, U.S. Department of
Commerce, 1401 Constitution Avenue
NW, Washington, DC 20230. For
information from the ITC, contact Mary
Messer, Office of Investigations, U.S.
International Trade Commission at (202)
205–3193.
SUPPLEMENTARY INFORMATION:
Background
Commerce’s procedures for the
conduct of Sunset Reviews are set forth
in its Procedures for Conducting FiveYear (Sunset) Reviews of Antidumping
and Countervailing Duty Orders, 63 FR
13516 (March 20, 1998) and 70 FR
62061 (October 28, 2005). Guidance on
methodological or analytical issues
relevant to Commerce’s conduct of
Sunset Reviews is set forth in
Antidumping Proceedings: Calculation
of the Weighted-Average Dumping
Margin and Assessment Rate in Certain
Antidumping Duty Proceedings; Final
Modification, 77 FR 8101 (February 14,
2012).
Initiation of Review
In accordance with section 751(c) of
the Act and 19 CFR 351.218(c), we are
initiating the Sunset Reviews of the
following antidumping and
countervailing duty order(s) and
suspended investigation(s):
Country
Product
Commerce contact
Jacqueline Arrowsmith,
(5th review) (202)
482–5255.
Jacqueline Arrowsmith,
(5th Review) (202)
482–5255.
Mary Kolberg, (5th Review) (202) 482–
1785.
Mary Kolberg, (5th Review) (202) 482–
1785.
A–475–818 ........................
731–TA–734
Italy .............................................
Pasta ...........................................
A–489–805 ........................
731–TA–735
Turkey .........................................
Pasta ...........................................
C–475–819 ........................
701–TA–365
Italy .............................................
Pasta ...........................................
C–489–806 ........................
701–TA–366
Turkey .........................................
Pasta ...........................................
VerDate Sep<11>2014
21:28 Feb 29, 2024
Jkt 262001
PO 00000
Frm 00024
Fmt 4703
Sfmt 4703
E:\FR\FM\01MRN1.SGM
01MRN1
Agencies
[Federal Register Volume 89, Number 42 (Friday, March 1, 2024)]
[Notices]
[Pages 15136-15139]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2024-04326]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
[A-487-001]
Mattresses From Bulgaria: Preliminary Affirmative Determination
of Sales at Less Than Fair Value
AGENCY: Enforcement and Compliance, International Trade Administration,
Department of Commerce.
SUMMARY: The U.S. Department of Commerce (Commerce) preliminarily
determines that mattresses from Bulgaria are being, or are likely to
be, sold in the United States at less than fair value (LTFV). The
period of investigation (POI) is July 1, 2022, through June 30, 2023.
Interested parties are invited to comment on this preliminary
determination.
DATES: Applicable March 1, 2024.
FOR FURTHER INFORMATION CONTACT: T.J. Worthington, AD/CVD Operations,
Office III, Enforcement and Compliance, International Trade
Administration, U.S. Department of Commerce, 1401
[[Page 15137]]
Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-
4567.
SUPPLEMENTARY INFORMATION:
Background
This preliminary determination is made in accordance with section
733(b) of the Tariff Act of 1930, as amended (the Act). Commerce
published the notice of initiation of this investigation on August 23,
2023.\1\ On October 23, 2023, Commerce postponed the preliminary
determination of this investigation until February 23, 2024.\2\
---------------------------------------------------------------------------
\1\ See Mattresses from Bosnia and Herzegovina, Bulgaria, Burma,
India, Italy, Kosovo, Mexico, the Philippines, Poland, Slovenia,
Spain, and Taiwan: Initiation of Less-Than-Fair-Value
Investigations, 88 FR 57433 (August 23, 2023) (Initiation Notice).
\2\ See Mattresses from Bosnia and Herzegovina, Bulgaria, Burma,
India, Italy, Kosovo, Mexico, the Philippines, Poland, Slovenia,
Spain, and Taiwan: Postponement of Preliminary Determinations in the
Less-Than-Fair Value Investigations, 88 FR 72737 (October 23, 2023).
---------------------------------------------------------------------------
For a complete description of the events that followed the
initiation of this investigation, see the Preliminary Decision
Memorandum.\3\ A list of topics included in the Preliminary Decision
Memorandum is included as Appendix II to this notice. The Preliminary
Decision Memorandum is a public document and is on file electronically
via Enforcement and Compliance's Antidumping and Countervailing Duty
Centralized Electronic Service System (ACCESS). ACCESS is available to
registered users at https://access.trade.gov. In addition, a complete
version of the Preliminary Decision Memorandum can be accessed directly
at https://access.trade.gov/public/FRNoticesListLayout.aspx.
---------------------------------------------------------------------------
\3\ See Memorandum, ``Decision Memorandum for the Preliminary
Affirmative Determination in the Less-Than-Fair-Value Investigation
of Mattresses from Bulgaria,'' dated concurrently with, and hereby
adopted by this notice (Preliminary Decision Memorandum).
---------------------------------------------------------------------------
Scope of the Investigation
The products covered by this investigation are mattresses from
Bulgaria. For a complete description of the scope of this
investigation, see Appendix I.
Scope Comments
In accordance with the Preamble,\4\ we set aside a period of time
for parties to raise issues regarding product coverage (i.e.,
scope).\5\ Certain interested parties commented on the scope of the
investigation as it appeared in the Initiation Notice. For a summary of
the product coverage comments and rebuttal responses submitted to the
record for this preliminary determination and accompanying discussion
and analysis of all comments timely received, see the Preliminary Scope
Decision Memorandum.\6\ Commerce is not preliminarily modifying the
scope language as it appeared in the Initiation Notice. See the scope
in Appendix I to this notice.
---------------------------------------------------------------------------
\4\ See Antidumping Duties; Countervailing Duties; Final Rule,
62 FR 27296, 27323 (May 19, 1997) (Preamble).
\5\ See Initiation Notice, 88 FR at 57434.
\6\ See Memorandum, ``Mattresses from Bosnia and Herzegovina,
Bulgaria, Burma, India, Indonesia, Italy, Kosovo, Mexico,
Philippines, Poland, Slovenia, Spain, and Taiwan: Scope Comments
Decision Memorandum for the Preliminary Determination,'' dated
concurrently with this preliminary determination (Preliminary Scope
Decision Memorandum).
---------------------------------------------------------------------------
In the Preliminary Scope Decision Memorandum, Commerce established
the deadline for parties to submit scope case and rebuttal briefs.\7\
---------------------------------------------------------------------------
\7\ Id.
---------------------------------------------------------------------------
Methodology
Commerce is conducting this investigation in accordance with
section 731 of the Act. Pursuant to sections 776(a) and (b) of the Act,
Commerce has preliminarily relied upon the facts otherwise available
with adverse inferences for BRN Sleep Products and Fumeibai Industrial
Co., Ltd. For a full description of the methodology underlying the
preliminary determination, see the Preliminary Decision Memorandum.
All-Others Rate
Sections 733(d)(1)(A)(ii) and 735(c)(5)(A) of the Act provide that
in the preliminary determination, Commerce shall determine an estimated
all-others rate for all exporters and producers not individually
examined. This rate shall be an amount equal to the weighted average of
the estimated weighted-average dumping margins established for
exporters and producers individually investigated, excluding any zero
and de minimis margins, and any margins determined entirely under
section 776 of the Act.
Pursuant to section 735(c)(5)(B) of the Act, if the estimated
weighted-average dumping margins established for all exporters and
producers individually examined are zero, de minimis or determined
based entirely on facts otherwise available, Commerce may use any
reasonable method to establish the estimated weighted-average dumping
margin for all-other producers or exporters. Commerce has preliminarily
determined the estimated weighted-average dumping margin for each of
the individually examined respondents under section 776 of the Act.
Although, pursuant to section 735(c)(5)(B) of the Act, Commerce's
normal practice under these circumstances has been to calculate the
all-others rate as a simple average of the alleged dumping margins from
the petition,\8\ the petitioners calculated only one estimated dumping
margin in the petition (i.e., 106.27 percent).\9\ Therefore, consistent
with Commerce's practice, we have preliminarily assigned the dumping
margin of 106.27 percent as the all-others rate in this investigation.
---------------------------------------------------------------------------
\8\ See, e.g., Notice of Preliminary Determination of Sales at
Less Than Fair Value: Sodium Nitrite from the Federal Republic of
Germany, 73 FR 21909, 21912 (April 23, 2008), unchanged in Notice of
Final Determination of Sales at Less Than Fair Value: Sodium Nitrite
from the Federal Republic of Germany, 73 FR 38986, 38987 (July 8,
2008), and accompanying Issues and Decision Memorandum at Comment 2;
see also Notice of Final Determination of Sales at Less Than Fair
Value: Raw Flexible Magnets from Taiwan, 73 FR 39673, 39674 (July
10, 2008); Steel Threaded Rod from Thailand: Preliminary
Determination of Sales at Less Than Fair Value and Affirmative
Preliminary Determination of Critical Circumstances, 78 FR 79670,
79671 (December 31, 2013), unchanged in Steel Threaded Rod from
Thailand: Final Determination of Sales at Less Than Fair Value and
Affirmative Final Determination of Critical Circumstances, 79 FR
14476, 14477 (March 14, 2014).
\9\ See Initiation Notice, 88 FR at 57436.
---------------------------------------------------------------------------
Preliminary Determination
Commerce preliminarily determines that the following estimated
weighted-average dumping margins exist:
------------------------------------------------------------------------
Estimated
weighted-
Producer/exporter average
dumping margin
(percent)
------------------------------------------------------------------------
BRN Sleep Products...................................... * 106.27
Fumeibai Industrial Co., Ltd............................ * 106.27
All Others.............................................. 106.27
------------------------------------------------------------------------
* Adverse Facts Available (AFA).
Suspension of Liquidation
In accordance with section 733(d)(2) of the Act, Commerce will
direct U.S. Customs and Border Protection (CBP) to suspend liquidation
of entries of subject merchandise, as described in Appendix I, entered,
or withdrawn from warehouse, for consumption on or after the date of
publication of this notice in the Federal Register. Further, pursuant
to section 733(d)(1)(B) of the Act and 19 CFR 351.205(d), Commerce will
instruct CBP to require a cash deposit equal to the estimated weighted-
average dumping margin or the estimated all-others rate, as follows:
(1) the cash deposit rate for the respondents listed above will be
equal to the company-specific estimated weighted-average dumping
margins determined in this preliminary determination; (2) if the
[[Page 15138]]
exporter is not a respondent identified above, but the producer is,
then the cash deposit rate will be equal to the company-specific
estimated weighted-average dumping margin established for that producer
of the subject merchandise; and (3) the cash deposit rate for all other
producers and exporters will be equal to the all-others estimated
weighted-average dumping margin. These suspension of liquidation
instructions will remain in effect until further notice.
Disclosure
Normally, Commerce discloses to interested parties the calculations
performed in connection with a preliminary determination within five
days of any public announcement or, if there is no public announcement,
within five days of the date of publication of the notice of
preliminary determination in the Federal Register, in accordance with
19 CFR 351.224(b). However, because Commerce preliminarily applied AFA
to the individually examined companies in this investigation, in
accordance with section 776 of the Act, and the applied AFA rate is
based solely on the petition, there are no calculations to disclose.
Verification
Because the individually examined respondents in this investigation
did not provide information requested by Commerce, and Commerce
preliminarily determines each of the examined respondents to have been
uncooperative, we will not conduct verification.
Public Comment
Case briefs or other written comments may be submitted to the
Assistant Secretary for Enforcement and Compliance no later than 30
days after the date of publication of the preliminary
determination.\10\ Rebuttal briefs, limited to issues raised in the
case briefs, may be filed not later than five days after the date for
filing case briefs.\11\ Interested parties who submit case briefs or
rebuttal briefs in this proceeding must submit: (1) a table of contents
listing each issue; and (2) a table of authorities.\12\
---------------------------------------------------------------------------
\10\ Commerce is exercising its discretion under 19 CFR
351.309(c)(1)(i) to alter the time limit for the filing of case
briefs.
\11\ See 19 CFR 351.309(d); see also Administrative Protective
Order, Service, and Other Procedures in Antidumping and
Countervailing Duty Proceedings, 88 FR 67069, 67077 (September 29,
2023) (APO and Service Final Rule).
\12\ See 19 CFR 351.309(c)(2) and (d)(2).
---------------------------------------------------------------------------
As provided under 19 CFR 351.309(c)(2) and (d)(2), in prior
proceedings we have encouraged interested parties to provide an
executive summary of their brief that should be limited to five pages
total, including footnotes. In this investigation, we instead request
that interested parties provide at the beginning of their briefs a
public, executive summary for each issue raised in their briefs.\13\
Further, we request that interested parties limit their executive
summary of each issue to no more than 450 words, not including
citations. We intend to use the executive summaries as the basis of the
comment summaries included in the issues and decision memorandum that
will accompany the final determination in this investigation. We
request that interested parties include footnotes for relevant
citations in the executive summary of each issue. Note that Commerce
has amended certain of its requirements pertaining to the service of
documents in 19 CFR 351.303(f).\14\
---------------------------------------------------------------------------
\13\ We use the term ``issue'' here to describe an argument that
Commerce would normally address in a comment of the Issues and
Decision Memorandum.
\14\ See APO and Service Final Rule.
---------------------------------------------------------------------------
Pursuant to 19 CFR 351.310(c), interested parties who wish to
request a hearing, limited to issues raised in the case and rebuttal
briefs, must submit a written request to the Assistant Secretary for
Enforcement and Compliance, U.S. Department of Commerce, within 30 days
after the date of publication of this notice. Requests should contain
the party's name, address, and telephone number, the number of
participants, and a list of the issues to be discussed. If a request
for a hearing is made, Commerce will inform parties of the time and
date for the hearing.
Final Determination
Section 735(a)(1) of the Act and 19 CFR 351.210(b)(1) provide that
Commerce will issue the final determination within 75 days after the
date of its preliminary determination. Accordingly, Commerce will make
its final determination no later than 75 days after the signature date
of this preliminary determination.
U.S. International Trade Commission Notification
In accordance with section 733(f) of the Act, Commerce will notify
the U.S. International Trade Commission (ITC) of its preliminary
determination. If the final determination is affirmative, the ITC will
determine within the later of 120 days after the date of this
preliminary determination or 45 days after the final determination
whether these imports are materially injuring, or threaten material
injury to, the U.S. industry.
Notification to Interested Parties
This determination is issued and published in accordance with
sections 733(f) and 777(i)(1) of the Act and 19 CFR 351.205(c).
Dated: February 23, 2024.
Ryan Majerus,
Deputy Assistant Secretary for Policy and Negotiations, performing the
non-exclusive functions and duties of the Assistant Secretary for
Enforcement and Compliance.
Appendix I
Scope of the Investigation
The products covered by this investigation are all types of
youth and adult mattresses. The term ``mattress'' denotes an
assembly of materials that at a minimum includes a ``core,'' which
provides the main support system of the mattress, and may consist of
innersprings, foam, other resilient filling, or a combination of
these materials. Mattresses also may contain: (1) ``upholstery,''
the material between the core and the top panel of the ticking on a
single-sided mattress, or between the core and the top and bottom
panel of the ticking on a double-sided mattress; and/or (2)
``ticking,'' the outermost layer of fabric or other material (e.g.,
vinyl) that encloses the core and any upholstery, also known as a
cover.
The scope of this investigation is restricted to only ``adult
mattresses'' and ``youth mattresses.'' ``Adult mattresses'' are
frequently described as ``twin,'' ``extra-long twin,'' ``full,''
``queen,'' ``king,'' or ``California king'' mattresses. ``Youth
mattresses'' are typically described as ``crib,'' ``toddler,'' or
``youth'' mattresses. All adult and youth mattresses are included
regardless of size and size description or how they are described
(e.g., frameless futon mattress and tri-fold mattress).
The scope encompasses all types of ``innerspring mattresses,''
``non-innerspring mattresses,'' and ``hybrid mattresses.''
``Innerspring mattresses'' contain innersprings, a series of metal
springs joined together in sizes that correspond to the dimensions
of mattresses. Mattresses that contain innersprings are referred to
as ``innerspring mattresses'' or ``hybrid mattresses.'' ``Hybrid
mattresses'' contain two or more support systems as the core, such
as layers of both memory foam and innerspring units.
``Non-innerspring mattresses'' are those that do not contain any
innerspring units. They are generally produced from foams (e.g.,
polyurethane, memory (viscoelastic), latex foam, gel infused
viscoelastic (gel foam), thermobonded polyester, polyethylene) or
other resilient filling.
Mattresses covered by the scope of this investigation may be
imported independently, as part of furniture or furniture mechanisms
(e.g., convertible sofa bed mattresses, sofa bed mattresses imported
with sofa bed mechanisms, corner group mattresses, day-bed
mattresses, roll-away bed
[[Page 15139]]
mattresses, high risers, trundle bed mattresses, crib mattresses),
or as part of a set (in combination with a ``mattress foundation'').
``Mattress foundations'' are any base or support for a mattress.
Mattress foundations are commonly referred to as ``foundations,''
``boxsprings,'' ``platforms,'' and/or ``bases.'' Bases can be
static, foldable, or adjustable. Only the mattress is covered by the
scope if imported as part of furniture, with furniture mechanisms,
or as part of a set, in combination with a mattress foundation.
Excluded from the scope of this investigation are ``futon''
mattresses. A ``futon'' is a bi-fold frame made of wood, metal, or
plastic material, or any combination thereof, that functions as both
seating furniture (such as a couch, love seat, or sofa) and a bed. A
``futon mattress'' is a tufted mattress, where the top covering is
secured to the bottom with thread that goes completely through the
mattress from the top through to the bottom, and it does not contain
innersprings or foam. A futon mattress is both the bed and seating
surface for the futon.
Also excluded from the scope are airbeds (including inflatable
mattresses) and waterbeds, which consist of air- or liquid-filled
bladders as the core or main support system of the mattress.
Also excluded is certain multifunctional furniture that is
convertible from seating to sleeping, regardless of filler material
or components, where such filler material or components are
upholstered, integrated into the design and construction of, and
inseparable from, the furniture framing, and the outermost layer of
the multifunctional furniture converts into the sleeping surface.
Such furniture may, and without limitation, be commonly referred to
as ``convertible sofas,'' ``sofabeds,'' ``sofa chaise sleepers,''
``futons,'' ``ottoman sleepers,'' or a like description.
Also excluded from the scope of this investigation are any
products covered by the existing antidumping duty orders on
uncovered innerspring units from the People's Republic of China,
South Africa, and the Socialist Republic of Vietnam. See Uncovered
Innerspring Units from the People's Republic of China, South Africa,
and Socialist Republic of Vietnam: Continuation of Antidumping Duty
Orders, 84 FR 55285 (October 16, 2019).
Also excluded from the scope of this investigation are bassinet
pads with a nominal length of less than 39 inches, a nominal width
of less than 25 inches, and a nominal depth of less than 2 inches.
Additionally, also excluded from the scope of this investigation
are ``mattress toppers.'' A ``mattress topper'' is a removable
bedding accessory that supplements a mattress by providing an
additional layer that is placed on top of a mattress. Excluded
mattress toppers have a height of four inches or less.
The products subject to this investigation are currently
classifiable under Harmonized Tariff Schedule of the United States
(HTSUS) subheadings: 9404.21.0010, 9404.21.0013, 9404.21.0095,
9404.29.1005, 9404.29.1013, 9404.29.1095, 9404.29.9085,
9404.29.9087, and 9404.29.9095. Products subject to this
investigation may also enter under HTSUS subheadings: 9401.41.0000,
9401.49.0000, and 9401.99.9081. Although the HTSUS subheadings are
provided for convenience and customs purposes, the written
description of the merchandise subject to this investigation is
dispositive.
Appendix II
List of Topics Discussed in the Preliminary Decision Memorandum
I. Summary
II. Background
III. Period of Investigation
IV. Use of Facts Available With Adverse Inferences
V. Recommendation
[FR Doc. 2024-04326 Filed 2-29-24; 8:45 am]
BILLING CODE 3510-DS-P