Aluminum Extrusions From the People's Republic of China, Colombia, Ecuador, India, Indonesia, Italy, the Republic of Korea, Malaysia, Mexico, Taiwan, Thailand, the Republic of Turkey, the United Arab Emirates, and the Socialist Republic of Vietnam: Postponement of Preliminary Determinations in the Less-Than-Fair-Value Investigations, 11814-11815 [2024-03145]
Download as PDF
11814
Federal Register / Vol. 89, No. 32 / Thursday, February 15, 2024 / Notices
khammond on DSKJM1Z7X2PROD with NOTICES
amount of dumping calculated for the
examined sales made to that importer by
the total quantity associated with those
sales. To determine whether an
importer-specific, per-unit assessment
rate is de minimis, in accordance with
19 CFR 351.106(c)(2), we also calculated
an importer-specific ad valorem ratio
based on estimated entered values.
Where either the respondent’s weightedaverage dumping margin is zero or de
minimis within the meaning of 19 CFR
351.106(c)(1), or an importer-specific
assessment rate is zero or de minimis,
we will instruct CBP to liquidate the
appropriate entries without regard to
antidumping duties.
Commerce’s ‘‘automatic assessment’’
will apply to entries of subject
merchandise during the POR produced
by Euro SME for which it did not know
that the merchandise it sold to an
intermediary (e.g., a reseller, trading
company, or exporter) was destined for
the United States. In such instances, we
will instruct CBP to liquidate
unreviewed entries at the all-others rate
if there is rate for the intermediate
company(ies) involved in the
transaction.5
Commerce intends to issue
assessment instructions to CBP no
earlier than 35 days after the date of
publication of the final results of this
review in the Federal Register. If a
timely summons is filed at the U.S.
Court of International Trade, the
assessment instructions will direct CBP
not to liquidate relevant entries until the
time for parties to file a request for a
statutory injunction has expired (i.e.,
within 90 days of publication).
Cash Deposit Requirements
The following cash deposit
requirements will be effective for all
shipments of subject merchandise
entered, or withdrawn from warehouse,
for consumption on or after the
publication date of the final results of
this administrative review, as provided
by section 751(a)(2)(C) of the Act: (1) the
cash deposit rate for Euro SME will be
equal to the weighted-average dumping
margin established in the final results of
this administrative review; (2) for
merchandise exported by producers or
exporters not covered in this review but
covered in a prior completed segment of
the proceeding, the cash deposit rate
will continue to be the companyspecific rate published for the most
recently completed segment of this
proceeding in which the producer or
exporter participated; (3) if the exporter
5 See Antidumping and Countervailing Duty
Proceedings: Assessment of Antidumping Duties, 68
FR 23954 (May 6, 2003).
VerDate Sep<11>2014
18:36 Feb 14, 2024
Jkt 262001
is not a firm covered in this review, a
prior review, or the original
investigation, but the producer has been
covered in a prior complete segment of
this proceeding, then the cash deposit
rate will be the rate established for the
most recent period for the producer of
the merchandise; (4) the cash deposit
rate for all other manufacturers or
exporters will continue to be 84.94
percent, the all-others rate established
in the less-than-fair-value
investigation.6 These cash deposit
requirements, when imposed, shall
remain in effect until further notice.
Notification to Importers
This notice serves as a final reminder
to importers of their responsibility
under 19 CFR 351.402(f)(2) to file a
certificate regarding the reimbursement
of antidumping duties prior to
liquidation of the relevant entries
during this review period. Failure to
comply with this requirement could
result in Commerce’s presumption that
reimbursement of antidumping duties
occurred and the subsequent assessment
of double antidumping duties.
Administrative Protective Order
This notice serves as the only
reminder to parties subject to an
administrative protective order (APO) of
their responsibility concerning the
disposition of proprietary information
disclosed under APO in accordance
with 19 CFR 351.305(a)(3). Timely
written notification of return/
destruction of APO materials or
conversion to judicial protective order is
hereby requested. Failure to comply
with the regulations and the terms of an
APO is a sanctionable violation.
Notification to Interested Parties
We are issuing and publishing these
final results in accordance with sections
751(a)(1) and 777(i) of the Act, and 19
CFR 351.221(b)(5).
Dated: February 6, 2024
Ryan Majerus,
Deputy Assistant Secretary for Policy and
Negotiations, performing the non-exclusive
functions and duties of the Assistant
Secretary for Enforcement and Compliance.
Appendix
List of Topics Discussed in the Issues and
Decision Memorandum
I. Summary
II. Background
III. Scope of the Order
IV. Changes Since the Preliminary Results
V. Discussion of the Issues
6 See Antidumping Duty Order: Polyethylene
Retail Carrier Bags from Malaysia, 69 FR 48203
(August 9, 2004).
PO 00000
Frm 00006
Fmt 4703
Sfmt 4703
Comment 1: Commerce Should Use the
Most Recent Quarterly Cost File
Comment 2: Commerce Should Correctly
Apply the Cap for Freight Revenue
Expenses
VI. Recommendation
[FR Doc. 2024–03142 Filed 2–14–24; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–570–158, A–301–806, A–331–804, A–533–
920, A–560–840, A–475–846, A–580–918, A–
557–826, A–201–860, A–583–874, A–549–
847, A–489–850, A–520–810, A–552–837]
Aluminum Extrusions From the
People’s Republic of China, Colombia,
Ecuador, India, Indonesia, Italy, the
Republic of Korea, Malaysia, Mexico,
Taiwan, Thailand, the Republic of
Turkey, the United Arab Emirates, and
the Socialist Republic of Vietnam:
Postponement of Preliminary
Determinations in the Less-Than-FairValue Investigations
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
DATES: Applicable February 15, 2024.
FOR FURTHER INFORMATION CONTACT:
Luke Caruso (the People’s Republic of
China (China)) at (202) 482–2081; Jose
Rivera (Colombia) at (202) 482–0842;
Stephanie Trejo (Ecuador) at (202) 482–
4390; Alex Cipolla (India) at (202) 482–
4956; Samuel Brummitt (Indonesia) at
(202) 482–7851; Christopher Maciuba
(the Republic of Korea (Korea)) at (202)
482–0413; Eric Hawkins (Italy) at (202)
482–1988; Benjamin Blythe (Malaysia)
at (202) 482–3457; Tyler Weinhold
(Mexico) at (202) 482–1121; Hermes
Pinilla (Taiwan) at (202) 482–3477; Jun
Jack Zhao (Thailand) at (202) 482–1396;
Sean Grossnickle (the Republic of
Turkey (Turkey)) at (202) 482–3818;
John K. Drury (the United Arab Emirates
(UAE)) at (202) 482–0195; and Katherine
Smith (the Socialist Republic of
Vietnam (Vietnam)) at (202) 482–0557,
AD/CVD Operations, Enforcement and
Compliance, International Trade
Administration, U.S. Department of
Commerce, 1401 Constitution Avenue
NW, Washington, DC 20230.
SUPPLEMENTARY INFORMATION:
AGENCY:
Background
On October 24, 2023, the U.S.
Department of Commerce (Commerce)
initiated the less-than-fair-value (LTFV)
investigations of imports of aluminum
extrusions from China, Colombia,
Ecuador, India, Indonesia, Italy, Korea,
Malaysia, Mexico, Taiwan, Thailand,
E:\FR\FM\15FEN1.SGM
15FEN1
Federal Register / Vol. 89, No. 32 / Thursday, February 15, 2024 / Notices
Turkey, the UAE, and Vietnam.1
Currently, the preliminary
determinations are due no later than
March 12, 2024.
khammond on DSKJM1Z7X2PROD with NOTICES
Postponement of Preliminary
Determination
Section 733(b)(1)(A) of the Tariff Act
of 1930, as amended (the Act), requires
Commerce to issue the preliminary
determination in an LTFV investigation
within 140 days after the date on which
Commerce initiated the investigation.
However, section 733(c)(1) of the Act
permits Commerce to postpone the
preliminary determination until no later
than 190 days after the date on which
Commerce initiated the investigation if:
(A) the petitioner makes a timely
request for a postponement; or (B)
Commerce concludes that the parties
concerned are cooperating, that the
investigation is extraordinarily
complicated, and that additional time is
necessary to make a preliminary
determination. Under 19 CFR
351.205(e), the petitioner must submit a
request for postponement 25 days or
more before the scheduled date of the
preliminary determination and must
state the reasons for the request.
Commerce will grant the request unless
it finds compelling reasons to deny the
request.
On February 5, 2024, the U.S.
Aluminum Extruders Coalition and the
United Steel, Paper and Forestry,
Rubber, Manufacturing, Energy, Allied
Industrial and Service Workers
International Union (collectively, the
petitioners), submitted a timely request
that Commerce postpone the
preliminary determinations in the LTFV
investigations for China, Colombia,
Ecuador, India, Indonesia, Italy, Korea,
Malaysia, Mexico, Taiwan, Thailand,
Turkey, the UAE, and Vietnam.2 The
petitioners stated that they request
postponement due to concerns that
these investigations cover over a dozen
countries and Commerce will need more
time, as initial questionnaires are just
starting to come in, to issue
supplemental questionnaires to address
deficiencies in the respondents’ initial
questionnaire responses.3
For the reasons stated above, and
because there are no compelling reasons
1 See Aluminum Extrusions from the People’s
Republic of China, Colombia, the Dominican
Republic, Ecuador, India, Indonesia, Italy, the
Republic of Korea, Malaysia, Mexico, Taiwan,
Thailand, the Republic of Turkey, the United Arab
Emirates, and the Socialist Republic of Vietnam:
Initiation of Less-Than-Fair-Value Investigation, 88
FR 74421 (October 31, 2023).
2 See Petitioners’ Letter, ‘‘Petitioner’s Request for
Postponement of Preliminary Determination,’’ dated
February 5, 2024.
3 Id. at 2.
VerDate Sep<11>2014
18:36 Feb 14, 2024
Jkt 262001
to deny the request, Commerce, in
accordance with section 733(c)(1)(A) of
the Act and 19 CFR 351.205(e), is
postponing the deadline for the
preliminary determinations by 50 days
(i.e., 190 days after the date on which
these investigations were initiated). As
a result, Commerce will issue its
preliminary determinations no later
than May 1, 2024. In accordance with
section 735(a)(1) of the Act and 19 CFR
351.210(b)(1), the deadline for the final
determinations in these investigations
will continue to be 75 days after the
date of the preliminary determinations,
unless postponed at a later date.
Notification to Interested Parties
This notice is issued and published
pursuant to section 733(c)(2) of the Act
and 19 CFR 351.205(f)(1).
Dated: February 9, 2024.
Ryan Majerus,
Deputy Assistant Secretary for Policy and
Negotiations, Performing the Non-exclusive
Functions and Duties of the Assistant
Secretary for Enforcement and Compliance.
[FR Doc. 2024–03145 Filed 2–14–24; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
National Institute of Standards and
Technology
Manufacturing Extension Partnership
Advisory Board
National Institute of Standards
and Technology, Commerce.
ACTION: Notice of open meeting.
AGENCY:
The National Institute of
Standards and Technology (NIST)
announces that the Manufacturing
Extension Partnership (MEP) Advisory
Board will hold an open meeting on
Tuesday, March 5–Wednesday March 6,
2024.
DATES: The meeting will be held on
Tuesday, March 5 from 10 a.m. to 4:30
p.m. and Wednesday March 6, 2024,
from 9 a.m. to 12 p.m. Eastern time.
ADDRESSES: The Tuesday, March 5
session will be held in person at the
Gaithersburg Marriott Washingtonian
Center: 9751 Washingtonian Boulevard,
Gaithersburg, MD 20878. The
Wednesday, March 6 session will be
held at the Commerce Research Library:
1401 Constitution Ave. NW,
Washington, DC 20230.
Please note admittance instructions in
the SUPPLEMENTARY INFORMATION section
below. Interested parties should be sure
to check the NIST MEP Advisory Board
website for the most up-to-date
SUMMARY:
PO 00000
Frm 00007
Fmt 4703
Sfmt 4703
11815
information at https://www.nist.gov/mep/
about/advisory-board.cfm.
FOR FURTHER INFORMATION CONTACT:
Beverly R. Bobb, Manufacturing
Extension Partnership Program,
National Institute of Standards and
Technology, 100 Bureau Drive, Mail
Stop 4800, Gaithersburg, MD 20899–
4800; telephone number: (301) 975–
5197; email: Beverly.Bobb@nist.gov.
SUPPLEMENTARY INFORMATION: The MEP
Advisory Board is authorized under 15
U.S.C 278k(m), in accordance with the
provisions of the Federal Advisory
Committee Act (FACA), as amended, 5
U.S.C. 1001 et seq. The Hollings
Manufacturing Extension Partnership
Program (Program) is a unique program
consisting of Centers in all 50 states and
Puerto Rico with partnerships at the
federal, state and local levels. By statute,
the MEP Advisory Board provides the
NIST Director with: (1) advice on the
activities, plans and policies of the
Program; (2) assessments of the
soundness of the plans and strategies of
the Program; and (3) assessments of
current performance against the plans of
the Program.
Background information on the MEP
Advisory Board is available at https://
www.nist.gov/mep/about/advisoryboard.cfm.
Pursuant to the Federal Advisory
Committee Act, as amended, 5 U.S.C.
1001 et seq., notice is hereby given that
the MEP Advisory Board will hold an
open meeting on Tuesday, March 5 from
10 a.m. to 4:30 p.m. and Wednesday,
March 6, 2024, from 9 a.m. to 12 p.m.
Eastern time. The meeting agenda will
include an update on the MEP
programmatic operations, as well as
provide guidance and advice on current
activities related to the current MEP
National NetworkTM 2023–2027
Strategic Plan. The agenda may change
to accommodate Board business. The
final agenda will be posted on the MEP
Advisory Board website at https://
www.nist.gov/mep/about/advisoryboard.cfm.
Individuals and representatives of
organizations who would like to offer
comments and suggestions related to the
MEP Advisory Board’s business are
invited to request a place on the agenda.
Approximately 20 minutes will be
reserved for public comments at the end
of the meeting. Speaking times will be
assigned on a first-come, first-served
basis. The amount of time per speaker
will be determined by the number of
requests received but is likely to be no
more than three to five minutes each.
Requests must be submitted by email to
Beverly.Bobb@nist.gov and must be
received by Wednesday, February 28,
E:\FR\FM\15FEN1.SGM
15FEN1
Agencies
[Federal Register Volume 89, Number 32 (Thursday, February 15, 2024)]
[Notices]
[Pages 11814-11815]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2024-03145]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
[A-570-158, A-301-806, A-331-804, A-533-920, A-560-840, A-475-846, A-
580-918, A-557-826, A-201-860, A-583-874, A-549-847, A-489-850, A-520-
810, A-552-837]
Aluminum Extrusions From the People's Republic of China,
Colombia, Ecuador, India, Indonesia, Italy, the Republic of Korea,
Malaysia, Mexico, Taiwan, Thailand, the Republic of Turkey, the United
Arab Emirates, and the Socialist Republic of Vietnam: Postponement of
Preliminary Determinations in the Less-Than-Fair-Value Investigations
AGENCY: Enforcement and Compliance, International Trade Administration,
Department of Commerce.
DATES: Applicable February 15, 2024.
FOR FURTHER INFORMATION CONTACT: Luke Caruso (the People's Republic of
China (China)) at (202) 482-2081; Jose Rivera (Colombia) at (202) 482-
0842; Stephanie Trejo (Ecuador) at (202) 482-4390; Alex Cipolla (India)
at (202) 482-4956; Samuel Brummitt (Indonesia) at (202) 482-7851;
Christopher Maciuba (the Republic of Korea (Korea)) at (202) 482-0413;
Eric Hawkins (Italy) at (202) 482-1988; Benjamin Blythe (Malaysia) at
(202) 482-3457; Tyler Weinhold (Mexico) at (202) 482-1121; Hermes
Pinilla (Taiwan) at (202) 482-3477; Jun Jack Zhao (Thailand) at (202)
482-1396; Sean Grossnickle (the Republic of Turkey (Turkey)) at (202)
482-3818; John K. Drury (the United Arab Emirates (UAE)) at (202) 482-
0195; and Katherine Smith (the Socialist Republic of Vietnam (Vietnam))
at (202) 482-0557, AD/CVD Operations, Enforcement and Compliance,
International Trade Administration, U.S. Department of Commerce, 1401
Constitution Avenue NW, Washington, DC 20230.
SUPPLEMENTARY INFORMATION:
Background
On October 24, 2023, the U.S. Department of Commerce (Commerce)
initiated the less-than-fair-value (LTFV) investigations of imports of
aluminum extrusions from China, Colombia, Ecuador, India, Indonesia,
Italy, Korea, Malaysia, Mexico, Taiwan, Thailand,
[[Page 11815]]
Turkey, the UAE, and Vietnam.\1\ Currently, the preliminary
determinations are due no later than March 12, 2024.
---------------------------------------------------------------------------
\1\ See Aluminum Extrusions from the People's Republic of China,
Colombia, the Dominican Republic, Ecuador, India, Indonesia, Italy,
the Republic of Korea, Malaysia, Mexico, Taiwan, Thailand, the
Republic of Turkey, the United Arab Emirates, and the Socialist
Republic of Vietnam: Initiation of Less-Than-Fair-Value
Investigation, 88 FR 74421 (October 31, 2023).
---------------------------------------------------------------------------
Postponement of Preliminary Determination
Section 733(b)(1)(A) of the Tariff Act of 1930, as amended (the
Act), requires Commerce to issue the preliminary determination in an
LTFV investigation within 140 days after the date on which Commerce
initiated the investigation. However, section 733(c)(1) of the Act
permits Commerce to postpone the preliminary determination until no
later than 190 days after the date on which Commerce initiated the
investigation if: (A) the petitioner makes a timely request for a
postponement; or (B) Commerce concludes that the parties concerned are
cooperating, that the investigation is extraordinarily complicated, and
that additional time is necessary to make a preliminary determination.
Under 19 CFR 351.205(e), the petitioner must submit a request for
postponement 25 days or more before the scheduled date of the
preliminary determination and must state the reasons for the request.
Commerce will grant the request unless it finds compelling reasons to
deny the request.
On February 5, 2024, the U.S. Aluminum Extruders Coalition and the
United Steel, Paper and Forestry, Rubber, Manufacturing, Energy, Allied
Industrial and Service Workers International Union (collectively, the
petitioners), submitted a timely request that Commerce postpone the
preliminary determinations in the LTFV investigations for China,
Colombia, Ecuador, India, Indonesia, Italy, Korea, Malaysia, Mexico,
Taiwan, Thailand, Turkey, the UAE, and Vietnam.\2\ The petitioners
stated that they request postponement due to concerns that these
investigations cover over a dozen countries and Commerce will need more
time, as initial questionnaires are just starting to come in, to issue
supplemental questionnaires to address deficiencies in the respondents'
initial questionnaire responses.\3\
---------------------------------------------------------------------------
\2\ See Petitioners' Letter, ``Petitioner's Request for
Postponement of Preliminary Determination,'' dated February 5, 2024.
\3\ Id. at 2.
---------------------------------------------------------------------------
For the reasons stated above, and because there are no compelling
reasons to deny the request, Commerce, in accordance with section
733(c)(1)(A) of the Act and 19 CFR 351.205(e), is postponing the
deadline for the preliminary determinations by 50 days (i.e., 190 days
after the date on which these investigations were initiated). As a
result, Commerce will issue its preliminary determinations no later
than May 1, 2024. In accordance with section 735(a)(1) of the Act and
19 CFR 351.210(b)(1), the deadline for the final determinations in
these investigations will continue to be 75 days after the date of the
preliminary determinations, unless postponed at a later date.
Notification to Interested Parties
This notice is issued and published pursuant to section 733(c)(2)
of the Act and 19 CFR 351.205(f)(1).
Dated: February 9, 2024.
Ryan Majerus,
Deputy Assistant Secretary for Policy and Negotiations, Performing the
Non-exclusive Functions and Duties of the Assistant Secretary for
Enforcement and Compliance.
[FR Doc. 2024-03145 Filed 2-14-24; 8:45 am]
BILLING CODE 3510-DS-P