For Inspiration and Recognition of Science and Technology (FIRST), et. al; Notice of Decision on Application for Duty-Free Entry of Scientific Instruments, 57173-57174 [2022-20209]

Download as PDF Federal Register / Vol. 87, No. 180 / Monday, September 19, 2022 / Notices Authorities This document is published pursuant to the NEPA regulations regarding publication of a notice of intent to issue an environmental impact statement (40 CFR 1501.9(d)). Watershed planning is authorized under the Watershed Protection and Flood Prevention Act of 1954, as amended, (Pub. L. 83–566) and the Flood Control Act of 1944 (Pub. L. 78– 534). Federal Assistance Programs The title and number of the Federal assistance programs as found in the Assistance Listing 1 (formerly referred to as the Catalog of Federal Domestic Assistance) to which this document applies are 10.904 Watershed Protection and Flood Prevention and 10.916 Watershed Rehabilitation. lotter on DSK11XQN23PROD with NOTICES1 Executive Order 12372 Executive Order 12372, ‘‘Intergovernmental Review of Federal Programs,’’ requires consultation with State and local officials that would be directly affected by proposed Federal financial assistance. The objectives of the Executive order are to foster an intergovernmental partnership and a strengthened federalism, by relying on State and local processes for State and local government coordination and review of proposed Federal financial assistance and direct Federal development. This program is subject to the provisions of Executive Order 12372, which requires intergovernmental consultation with State and local officials. USDA Non-Discrimination Policy In accordance with Federal civil rights law and USDA civil rights regulations and policies, USDA, its Agencies, offices, and employees, and institutions participating in or administering USDA programs are prohibited from discriminating based on race, color, national origin, religion, sex, gender identity (including gender expression), sexual orientation, disability, age, marital status, family or parental status, income derived from a public assistance program, political beliefs, or reprisal or retaliation for prior civil rights activity, in any program or activity conducted or funded by USDA (not all bases apply to all programs). Remedies and complaint filing deadlines vary by program or incident. Persons with disabilities who require alternative means of communication for program information (for example, braille, large print, audiotape, American 1 See https://sam.gov/content/assistance-listings. VerDate Sep<11>2014 17:37 Sep 16, 2022 Jkt 256001 Sign Language, etc.) should contact the responsible Agency or USDA TARGET Center at (202) 720–2600 (voice and TTY) or (844) 433–2774 (toll-free nationwide). Additionally, program information may be made available in languages other than English. To file a program discrimination complaint, complete the USDA Program Discrimination Complaint Form, AD– 3027, found online at https:// www.usda.gov/oascr/how-to-file-aprogram-discrimination-complaint and at any USDA office or write a letter addressed to USDA and provide in the letter all the information requested in the form. To request a copy of the complaint form, call (866) 632–9992. Submit your completed form or letter to USDA by mail to: U.S. Department of Agriculture, Office of the Assistant Secretary for Civil Rights, 1400 Independence Avenue SW, Washington, DC 20250–9410 or email: OAC@ usda.gov. USDA is an equal opportunity provider, employer, and lender. Ronald Alvarado, Oregon State Conservationist,Natural Resources Conservation Service. Meta Loftsgaarden, Mt. Hood National Forest Supervisor, U.S. Forest Service. [FR Doc. 2022–20164 Filed 9–16–22; 8:45 am] BILLING CODE 3410–16–P DEPARTMENT OF COMMERCE International Trade Administration For Inspiration and Recognition of Science and Technology (FIRST), et. al; Notice of Decision on Application for Duty-Free Entry of Scientific Instruments This is a decision pursuant to Section 6(c) of the Educational, Scientific, and Cultural Materials Importation Act of 1966 (Pub. L. 89–651, as amended by Pub. L. 106–36; 80 Stat. 897; 15 CFR part 301). On August 16, 2022, the Department of Commerce published a notice in the Federal Register requesting public comment on whether instruments of equivalent scientific value, for the purposes for which the instruments identified in the docket(s) below are intended to be used, are being manufactured in the United States. See Application(s) for Duty-Free Entry of Scientific Instruments, 87 FR 50289–90, August 16, 2022 (Notice). We received no public comments. Docket Number: 22–001. Applicant: For Inspiration and Recognition of Science and Technology (FIRST), 200 PO 00000 Frm 00006 Fmt 4703 Sfmt 4703 57173 Bedford Street, Manchester, NH 03101. Instrument: Dual Band 1.17 Gbps Access Point. Manufacturer: Open Mesh Inc., China. Intended Use: According to the applicant, the FIRST Robotics Competition (FRC) (EIN 22–2990908) requires wireless radio communication between student teams’ driver controls and their home-build robots. It is crucial that FRC be able to manage the wireless traffic (for safety and team experience reasons). FRC mandates a specific radio (Datto’s OM5P–AN, obsolete, or OM5P– AC models, both are dual band 1.17 Gbps access points) with custom firmware which optimizes the radio for the competition use case. This transaction is to secure the radios needed for educational robotic kits for the 2020 season (4,400) air-freighted to meet 2020 season deadlines) and the 2021 season (4,336 shipped via ocean). The applicant certifies that there will not be any use of the foreign instrument by or for the primary benefit of any commercial (for-profit) entity with 5 years after entry of the foreign instrument into the United States customs territory. Docket Number: 22–002. Applicant: University of California, Riverside, 900 University Avenue, Riverside, CA 92521. Instrument: Customs Pulsed Laser Deposit & Molecular-Beam Epitaxy (PLD/MBE) deposition system. Manufacturer: BEIJING PERFECT TECHNOLOGY CO., LTD., Beijing, China. Intended Use: According to the applicant, the instrument is intended to be used for research purposes for experimental condenses matter physics, spin transport, quantum transport, and spin-dependent physics, graphene, 2D layers, heterostructures, and nanoscale devices, magnetic insulators, heterostructures and interfaces, energy related materials science research. Docket Number: 22–003. Applicant: University of Chicago Argonne LLC, Operator of Argonne National Laboratory, 9700 South Cass Avenue, Lemont, IL (U.S.A.), 60439–4873. Instrument: High Heat Load Exit Mask Assemblies. Manufacturer: Strumenti Scientific CINEL S.R.L., Italy. Intended Use: According to the applicant, these components will be used to assemble the new high heat load front ends for the Advanced Photon Source upgrade. The front end consists of a series of components that connect the storage ring to the user beamline to deliver a photon beam that will be used as a three-dimensional X-ray microscope for experimental purposes. The materials/ phenomena that are studied vary widely from material properties analysis, protein mapping for pharmaceutical companies, X-ray imaging and chemical E:\FR\FM\19SEN1.SGM 19SEN1 lotter on DSK11XQN23PROD with NOTICES1 57174 Federal Register / Vol. 87, No. 180 / Monday, September 19, 2022 / Notices composition determination. These components will be used exclusively for scientific research for a minimum of 5 years at Argonne National Laboratory. The properties of the materials studied include but are not limited to grain structure, grain boundary and interstitial defects, and morphology. These properties are not only studied at ambient environments but also under high pressure, temperature, stress and strain. Docket Number: 22–004. Applicant: UChicago Argonne LLC, Operatory of Argonne National Laboratory, 9700 South Cass Avenue, Lemont, IL (U.S.A.) 60439–4873. Instrument: High Energy Monochromators. Manufacturer: Strumenti Scientific CINEL S.R.L., Italy. Intended Use: According to the applicant, these instruments will be used on new beamlines for the Advanced Photon Source upgrade. The monochromators are bandpass optical filters, that allow only a narrow band of wavelengths of X-rays to pass. This is critical for the needs of the beamline’s experimental purposes. The materials/ phenomena that are studied vary widely from material properties analysis, protein mapping for pharmaceutical companies, X-ray imaging and chemical composition determination. These components will be used exclusively for scientific research for a minimum of 5 years at Argonne National Laboratory. The properties of the materials studied include but are not limited to grain structure, grain boundary and interstitial defects, and morphology. These properties are not only studied at ambient environments but also under high pressure, temperature, stress and strain. Docket Number: 22–005. Applicant: Cornell University, School of Civil and Environmental Engineering, Hollister Hall (2046), Room #220, 527 College Avenue, Ithaca, NY 14853–3501, USA. Instrument: Semi-automatic single cell sorter. Manufacturer: Hooke Instruments, Ltd., P.R. China. Intended Use: According to the applicant, the research will involve identifying and obtaining novel single cells based on metabolic traits that cannot be identified with simple label/staining, and in addition, we would like to obtain live cells for further culturing and investigation. We are interested in novel and non-culturable organisms/cells that possess combined traits of desire that can be detected using Raman micro- VerDate Sep<11>2014 17:37 Sep 16, 2022 Jkt 256001 spectroscopy fingerprinting. This unique label-free and ejection-based cell sorter is the only one known that will enable the applicant to eject the single live cell (pre-identified with noninvasive, non-damaging Raman) in complicated bioprocess/environmental (soil water) samples into collectors and then allow us to study them. Dated: September 14, 2022. Richard Herring, Director, Subsidies Enforcement, Enforcement and Compliance. [FR Doc. 2022–20209 Filed 9–16–22; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [A–570–016] Certain Passenger Vehicles and Light Truck Tires From the People’s Republic of China: Notice of Court Decision Not in Harmony With the Results of Antidumping Administrative Review; Notice of Amended Final Results; Correction Enforcement and Compliance, International Trade Administration, Department of Commerce. ACTION: Notice; correction. AGENCY: The U.S. Department of Commerce (Commerce) published notice in the Federal Register of June 3, 2022, in which Commerce announced the amended final results of the 2015– 2016 administrative review of the antidumping duty (AD) order on certain passenger vehicle and light truck tires (passenger tires), following a final decision by the U.S. Court of International Trade which was not in harmony with the underlying final results of that review. In that notice, Commerce incorrectly labeled the headers of two tables setting forth the weighted-average dumping margins applicable in the amended final results as ‘‘Producer/Exporter,’’ instead of labeling them as ‘‘Exporter.’’ In addition, Commerce incorrectly separated certain entities in the first table, instead of listing them together. We are correcting these inadvertent errors with this notice, as described below. SUMMARY: FOR FURTHER INFORMATION CONTACT: Charles DeFilippo, AD/CVD Operations, PO 00000 Frm 00007 Fmt 4703 Sfmt 4703 Office VII, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–3797. SUPPLEMENTARY INFORMATION: Correction In the Federal Register of June 3, 2022, in FR Doc 2022–11939, on pages 33718 and 33719, in the first column of each table, correct the header from ‘‘Producer/Exporter’’ to ‘‘Exporter.’’ In addition, on page 33719, in the first column of the first table, correct the list of entities by combining Sailun Jinyu Group Co., Ltd.; Sailun Jinyu Group (Hong Kong) Co., Limited; Shandong Jinyu Industrial Co., Ltd.; Sailun Tire International Corp.; Seatex International Inc.; Dynamic Tire Corp.; and Husky Tire Corp. together, rather than on separate lines. Background On June 3, 2022, Commerce published in the Federal Register the amended final results of the 2015–2016 administrative review of the order on passenger tires from the People’s Republic of China.1 We incorrectly labeled the headers in two tables setting forth the weighted-average dumping margins determined in that review as ‘‘Producer/Exporter,’’ instead of ‘‘Exporter.’’ In addition, we incorrectly separated certain entities in the first table, instead of listing them together as determined in the underlying investigation.2 The corrected tables are below: 1 See Certain Passenger Vehicles and Light Truck Tires from the People’s Republic of China: Notice of Court Decision Not in Harmony With the Results of Antidumping Administrative Review; Notice of Amended Final Results, 87 FR 33717 (June 3, 2022); see also Certain Passenger Vehicle and Light Truck Tires from the People’s Republic of China: Final Results of Antidumping Duty Administrative Review and Final Determination of No Shipments; 2015–2016, 83 FR 11690 (March 16, 2018). 2 The entities that were incorrectly separated are: Sailun Jinyu Group Co., Ltd.; Sailun Jinyu Group (Hong Kong) Co., Limited; Shandong Jinyu Industrial Co., Ltd.; Sailun Tire International Corp.; Seatex International Inc.; Dynamic Tire Corp.; and Husky Tire Corp. See Antidumping Duty Investigation of Certain Passenger Vehicle and Light Truck Tires from the People’s Republic of China: Final Determination of Sales at Less Than Fair Value and Final Affirmative Determination of Critical Circumstances, In Part, 80 FR 34893 (June 18, 2015). E:\FR\FM\19SEN1.SGM 19SEN1

Agencies

[Federal Register Volume 87, Number 180 (Monday, September 19, 2022)]
[Notices]
[Pages 57173-57174]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2022-20209]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration


For Inspiration and Recognition of Science and Technology 
(FIRST), et. al; Notice of Decision on Application for Duty-Free Entry 
of Scientific Instruments

    This is a decision pursuant to Section 6(c) of the Educational, 
Scientific, and Cultural Materials Importation Act of 1966 (Pub. L. 89-
651, as amended by Pub. L. 106-36; 80 Stat. 897; 15 CFR part 301). On 
August 16, 2022, the Department of Commerce published a notice in the 
Federal Register requesting public comment on whether instruments of 
equivalent scientific value, for the purposes for which the instruments 
identified in the docket(s) below are intended to be used, are being 
manufactured in the United States. See Application(s) for Duty-Free 
Entry of Scientific Instruments, 87 FR 50289-90, August 16, 2022 
(Notice). We received no public comments.
    Docket Number: 22-001. Applicant: For Inspiration and Recognition 
of Science and Technology (FIRST), 200 Bedford Street, Manchester, NH 
03101. Instrument: Dual Band 1.17 Gbps Access Point. Manufacturer: Open 
Mesh Inc., China. Intended Use: According to the applicant, the FIRST 
Robotics Competition (FRC) (EIN 22-2990908) requires wireless radio 
communication between student teams' driver controls and their home-
build robots. It is crucial that FRC be able to manage the wireless 
traffic (for safety and team experience reasons). FRC mandates a 
specific radio (Datto's OM5P-AN, obsolete, or OM5P-AC models, both are 
dual band 1.17 Gbps access points) with custom firmware which optimizes 
the radio for the competition use case. This transaction is to secure 
the radios needed for educational robotic kits for the 2020 season 
(4,400) air-freighted to meet 2020 season deadlines) and the 2021 
season (4,336 shipped via ocean). The applicant certifies that there 
will not be any use of the foreign instrument by or for the primary 
benefit of any commercial (for-profit) entity with 5 years after entry 
of the foreign instrument into the United States customs territory.
    Docket Number: 22-002. Applicant: University of California, 
Riverside, 900 University Avenue, Riverside, CA 92521. Instrument: 
Customs Pulsed Laser Deposit & Molecular-Beam Epitaxy (PLD/MBE) 
deposition system. Manufacturer: BEIJING PERFECT TECHNOLOGY CO., LTD., 
Beijing, China. Intended Use: According to the applicant, the 
instrument is intended to be used for research purposes for 
experimental condenses matter physics, spin transport, quantum 
transport, and spin-dependent physics, graphene, 2D layers, 
heterostructures, and nanoscale devices, magnetic insulators, 
heterostructures and interfaces, energy related materials science 
research.
    Docket Number: 22-003. Applicant: University of Chicago Argonne 
LLC, Operator of Argonne National Laboratory, 9700 South Cass Avenue, 
Lemont, IL (U.S.A.), 60439-4873. Instrument: High Heat Load Exit Mask 
Assemblies. Manufacturer: Strumenti Scientific CINEL S.R.L., Italy. 
Intended Use: According to the applicant, these components will be used 
to assemble the new high heat load front ends for the Advanced Photon 
Source upgrade. The front end consists of a series of components that 
connect the storage ring to the user beamline to deliver a photon beam 
that will be used as a three-dimensional X-ray microscope for 
experimental purposes. The materials/phenomena that are studied vary 
widely from material properties analysis, protein mapping for 
pharmaceutical companies, X-ray imaging and chemical

[[Page 57174]]

composition determination. These components will be used exclusively 
for scientific research for a minimum of 5 years at Argonne National 
Laboratory. The properties of the materials studied include but are not 
limited to grain structure, grain boundary and interstitial defects, 
and morphology. These properties are not only studied at ambient 
environments but also under high pressure, temperature, stress and 
strain.
    Docket Number: 22-004. Applicant: UChicago Argonne LLC, Operatory 
of Argonne National Laboratory, 9700 South Cass Avenue, Lemont, IL 
(U.S.A.) 60439-4873. Instrument: High Energy Monochromators. 
Manufacturer: Strumenti Scientific CINEL S.R.L., Italy. Intended Use: 
According to the applicant, these instruments will be used on new 
beamlines for the Advanced Photon Source upgrade. The monochromators 
are bandpass optical filters, that allow only a narrow band of 
wavelengths of X-rays to pass. This is critical for the needs of the 
beamline's experimental purposes. The materials/phenomena that are 
studied vary widely from material properties analysis, protein mapping 
for pharmaceutical companies, X-ray imaging and chemical composition 
determination. These components will be used exclusively for scientific 
research for a minimum of 5 years at Argonne National Laboratory. The 
properties of the materials studied include but are not limited to 
grain structure, grain boundary and interstitial defects, and 
morphology. These properties are not only studied at ambient 
environments but also under high pressure, temperature, stress and 
strain.
    Docket Number: 22-005. Applicant: Cornell University, School of 
Civil and Environmental Engineering, Hollister Hall (2046), Room #220, 
527 College Avenue, Ithaca, NY 14853-3501, USA. Instrument: Semi-
automatic single cell sorter. Manufacturer: Hooke Instruments, Ltd., 
P.R. China. Intended Use: According to the applicant, the research will 
involve identifying and obtaining novel single cells based on metabolic 
traits that cannot be identified with simple label/staining, and in 
addition, we would like to obtain live cells for further culturing and 
investigation. We are interested in novel and non-culturable organisms/
cells that possess combined traits of desire that can be detected using 
Raman micro-spectroscopy fingerprinting. This unique label-free and 
ejection-based cell sorter is the only one known that will enable the 
applicant to eject the single live cell (pre-identified with non-
invasive, non-damaging Raman) in complicated bioprocess/environmental 
(soil water) samples into collectors and then allow us to study them.

    Dated: September 14, 2022.
Richard Herring,
Director, Subsidies Enforcement, Enforcement and Compliance.
[FR Doc. 2022-20209 Filed 9-16-22; 8:45 am]
BILLING CODE 3510-DS-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.