CSA Group Testing & Certification Inc.: Grant of Expansion of Recognition, 51157-51158 [2022-17880]

Download as PDF Federal Register / Vol. 87, No. 160 / Friday, August 19, 2022 / Notices recognition, following requirements in Appendix A, 29 CFR 1910.7. This appendix requires that the agency publish two notices in the Federal Register in processing an application. In the first notice, OSHA announces the application and provides the preliminary finding. In the second notice, the agency provides the final decision on the application. These notices set forth the NRTL’s scope of recognition or modifications of that scope. OSHA maintains an informational web page for each NRTL, including ITSNA, which details the NRTL’s scope of recognition. These pages are available from the OSHA website at https://www.osha.gov/dts/ otpca/nrtl/. ITSNA submitted an application dated November 23, 2021, (OSHA– 2007–0039–0035), to expand their recognition to include one additional test standard. The standard requested in the expansion application and addressed here is a replacement standard for ISA 12.12.01, which is currently included in ITSNA’s NRTL Scope of Recognition. OSHA staff performed detailed analysis of the application packets and reviewed other pertinent information. OSHA did not perform any on-site reviews in relation to this application. OSHA published the preliminary notice announcing ITSNA’s expansion application in the Federal Register on June 17, 2022 (87 FR 36539). The agency requested comments by July 5, 2022, but it received no comments in response to this notice. OSHA is now proceeding with this final grant of expansion of ITSNA’s NRTL recognition. To obtain or review copies of all public documents pertaining to ITSNA’s expansion application, go to https:// www.regulations.gov or contact the Docket Office, Occupational Safety and Health Administration, U.S. Department of Labor. Docket No. OSHA–2007–0039 51157 contains all materials in the record concerning ITSNA’s recognition. Please note: Due to the COVID–19 pandemic, the Docket Office is closed to the public at this time but can be contacted at (202) 693–2350. II. Final Decision and Order OSHA staff examined ITSNA’s expansion application, its capability to meet the requirements of the test standards, and other pertinent information. Based on its review of this evidence, OSHA finds that ITSNA meets the requirements of 29 CFR 1910.7 for expansion of its recognition, subject to the limitations and conditions listed in this notice. OSHA, therefore, is proceeding with this final notice to grant ITSNA’s expanded scope of recognition. OSHA limits the expansion of ITSNA’s recognition to testing and certification of products for demonstration of conformance to the test standard listed below in Table 1. TABLE 1—LIST OF APPROPRIATE TEST STANDARD FOR INCLUSION IN ITSNA’S NRTL SCOPE OF RECOGNITION Test standard Test standard title UL 121201 .............. Nonincendive Electrical Equipment for Use in Class I and Class II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations. lotter on DSK11XQN23PROD with NOTICES1 OSHA’s recognition of any NRTL for a particular test standard is limited to equipment or materials for which OSHA standards require third-party testing and certification before using them in the workplace. Consequently, if a test standard also covers any products for which OSHA does not require such testing and certification, a NRTL’s scope of recognition does not include these products. A. Conditions Recognition is contingent on continued compliance with 29 CFR 1910.7, including, but not limited to, abiding by the following conditions of the recognition: 1. ITSNA must inform OSHA as soon as possible, in writing, of any change of ownership, facilities, or key personnel, and of any major change in its operations as a NRTL, and provide details of the change(s); 2. ITSNA must meet all the terms of its recognition and comply with all OSHA policies pertaining to this recognition; and 3. ITSNA must continue to meet the requirements for recognition, including all previously published conditions on ITSNA’s scope of recognition, in all areas for which it has recognition. Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the scope VerDate Sep<11>2014 18:26 Aug 18, 2022 Jkt 256001 of recognition of ITSNA as a NRTL, subject to the limitations and conditions specified above. III. Authority and Signature James S. Frederick, Deputy Assistant Secretary of Labor for Occupational Safety and Health, 200 Constitution Avenue NW, Washington, DC 20210, authorized the preparation of this notice. Accordingly, the agency is issuing this notice pursuant to Section 29 U.S.C. 657(g)(2), Secretary of Labor’s Order No. 8–2020 (85 FR 58393; Sept. 18, 2020), and 29 CFR 1910.7. Signed at Washington, DC, on August 5, 2022. James S. Frederick, Deputy Assistant Secretary of Labor for Occupational Safety and Health. [FR Doc. 2022–17883 Filed 8–18–22; 8:45 am] BILLING CODE 4510–26–P DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA–2006–0042] CSA Group Testing & Certification Inc.: Grant of Expansion of Recognition Occupational Safety and Health Administration (OSHA), Labor. AGENCY: PO 00000 Frm 00105 Fmt 4703 Sfmt 4703 ACTION: Notice. In this notice, OSHA announces the final decision to expand the scope of recognition for CSA Group Testing & Certification Inc., as a Nationally Recognized Testing Laboratory (NRTL). DATES: The expansion of the scope of recognition becomes effective on August 19, 2022. FOR FURTHER INFORMATION CONTACT: Information regarding this notice is available from the following sources: Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office of Communications, U.S. Department of Labor; telephone (202) 693–1999 or email meilinger.francis2@dol.gov. General and technical information: Contact Mr. Kevin Robinson, Director, Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, U.S. Department of Labor; telephone (202) 693–2110 or email robinson.kevin@dol.gov. SUPPLEMENTARY INFORMATION: SUMMARY: I. Notice of Final Decision OSHA hereby gives notice of the expansion of the scope of recognition of CSA Group Testing & Certification Inc. (CSA) as a NRTL. CSA’s expansion E:\FR\FM\19AUN1.SGM 19AUN1 51158 Federal Register / Vol. 87, No. 160 / Friday, August 19, 2022 / Notices covers the addition of one test standard to the NRTL scope of recognition. OSHA recognition of a NRTL signifies that the organization meets the requirements specified in 29 CFR 1910.7. Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within the scope of recognition. Each NRTL’s scope of recognition includes (1) the type of products the NRTL may test, with each type specified by the applicable test standard; and (2) the recognized site(s) that has/have the technical capability to perform the product-testing and productcertification activities for test standards within the NRTL’s scope. Recognition is not a delegation or grant of government authority; however, recognition enables employers to use products approved by the NRTL to meet OSHA standards that require product testing and certification. The agency processes an application by a NRTL for initial recognition and for an expansion or renewal of this recognition, following requirements in Appendix A, 29 CFR 1910.7. This appendix requires that the agency publish two notices in the Federal Register in processing an application. In the first notice, OSHA announces the application and provides the preliminary finding. In the second notice, the agency provides the final decision on the application. These notices set forth the NRTL’s scope of recognition or modifications of that scope. OSHA maintains an informational web page for each NRTL, including CSA, which details the NRTL’s scope of recognition. These pages are available from the OSHA website at https://www.osha.gov/dts/ otpca/nrtl/. CSA submitted an application dated September 24, 2021, (OSHA–2006– 0042–0027), to expand their recognition to include four additional test standards. This notice covers the expansion to UL 121201 only. The remaining standards in that application will be covered in a future notice. The standard requested in the expansion application and addressed here is a replacement standard for ISA 12.12.01, which is currently included in CSA’s NRTL Scope of Recognition. OSHA staff performed detailed analysis of the application packet and reviewed other pertinent information. OSHA did not perform any on-site reviews in relation to this application. OSHA published the preliminary notice announcing CSA’s expansion application in the Federal Register on June 17, 2022 (87 FR 36544). The agency requested comments by July 5, 2022, but it received no comments in response to this notice. OSHA is now proceeding with this final grant of expansion of CSA’s NRTL recognition. To obtain or review copies of all public documents pertaining to the CSA’s application, go to https:// www.regulations.gov or contact the Docket Office, Occupational Safety and Health Administration, U.S. Department of Labor. Docket No. OSHA–2006–0042 contains all materials in the record concerning CSA’s recognition. Please note: Due to the COVID–19 pandemic, the Docket Office is closed to the public at this time but can be contacted at (202) 693–2350. II. Final Decision and Order OSHA staff examined CSA’s expansion application, its capability to meet the requirements of the test standard, and other pertinent information. Based on its review of this evidence, OSHA finds that CSA meets the requirements of 29 CFR 1910.7 for expansion of its recognition, subject to the limitations and conditions listed in this notice. OSHA, therefore, is proceeding with this final notice to grant CSA’s expanded scope of recognition. OSHA limits the expansion of CSA’s recognition to testing and certification of products for demonstration of conformance to the test standard listed below in Table 1. TABLE 1—LIST OF APPROPRIATE TEST STANDARD FOR INCLUSION IN CSA’S NRTL SCOPE OF RECOGNITION Test standard Test standard title UL 121201 .............. Nonincendive Electrical Equipment for Use in Class I and Class II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations. OSHA’s recognition of any NRTL for a particular test standard is limited to equipment or materials for which OSHA standards require third-party testing and certification before using them in the workplace. Consequently, if a test standard also covers any products for which OSHA does not require such testing and certification, a NRTL’s scope of recognition does not include these products. lotter on DSK11XQN23PROD with NOTICES1 A. Conditions Recognition is contingent on continued compliance with 29 CFR 1910.7, including, but not limited to, abiding by the following conditions of the recognition: 1. CSA must inform OSHA as soon as possible, in writing, of any change of ownership, facilities, or key personnel, and of any major change in its operations as a NRTL, and provide details of the change(s); VerDate Sep<11>2014 18:26 Aug 18, 2022 Jkt 256001 2. CSA must meet all the terms of its recognition and comply with all OSHA policies pertaining to this recognition; and 3. CSA must continue to meet the requirements for recognition, including all previously published conditions on CSA’s scope of recognition, in all areas for which it has recognition. Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the scope of recognition of CSA as a NRTL, subject to the limitations and conditions specified above. Order No. 8–2020 (85 FR 58393; Sept. 18, 2020), and 29 CFR 1910.7. Signed at Washington, DC, on August 5, 2022. James S. Frederick, Deputy Assistant Secretary of Labor for Occupational Safety and Health. [FR Doc. 2022–17880 Filed 8–18–22; 8:45 am] BILLING CODE 4510–26–P NATIONAL SCIENCE FOUNDATION III. Authority and Signature Sunshine Act Meetings James S. Frederick, Deputy Assistant Secretary of Labor for Occupational Safety and Health, 200 Constitution Avenue NW, Washington, DC 20210, authorized the preparation of this notice. Accordingly, the agency is issuing this notice pursuant to Section 29 U.S.C. 657(g)(2), Secretary of Labor’s The National Science Board (NSB) hereby gives notice of the scheduling of a videoconference of the Committee on Oversight (CO) for the transaction of National Science Board business, pursuant to the National Science Foundation Act and the Government in the Sunshine Act. PO 00000 Frm 00106 Fmt 4703 Sfmt 4703 E:\FR\FM\19AUN1.SGM 19AUN1

Agencies

[Federal Register Volume 87, Number 160 (Friday, August 19, 2022)]
[Notices]
[Pages 51157-51158]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2022-17880]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2006-0042]


CSA Group Testing & Certification Inc.: Grant of Expansion of 
Recognition

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: In this notice, OSHA announces the final decision to expand 
the scope of recognition for CSA Group Testing & Certification Inc., as 
a Nationally Recognized Testing Laboratory (NRTL).

DATES: The expansion of the scope of recognition becomes effective on 
August 19, 2022.

FOR FURTHER INFORMATION CONTACT: Information regarding this notice is 
available from the following sources:
    Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office 
of Communications, U.S. Department of Labor; telephone (202) 693-1999 
or email [email protected].
    General and technical information: Contact Mr. Kevin Robinson, 
Director, Office of Technical Programs and Coordination Activities, 
Directorate of Technical Support and Emergency Management, Occupational 
Safety and Health Administration, U.S. Department of Labor; telephone 
(202) 693-2110 or email [email protected].

SUPPLEMENTARY INFORMATION:

I. Notice of Final Decision

    OSHA hereby gives notice of the expansion of the scope of 
recognition of CSA Group Testing & Certification Inc. (CSA) as a NRTL. 
CSA's expansion

[[Page 51158]]

covers the addition of one test standard to the NRTL scope of 
recognition.
    OSHA recognition of a NRTL signifies that the organization meets 
the requirements specified in 29 CFR 1910.7. Recognition is an 
acknowledgment that the organization can perform independent safety 
testing and certification of the specific products covered within the 
scope of recognition. Each NRTL's scope of recognition includes (1) the 
type of products the NRTL may test, with each type specified by the 
applicable test standard; and (2) the recognized site(s) that has/have 
the technical capability to perform the product-testing and product-
certification activities for test standards within the NRTL's scope. 
Recognition is not a delegation or grant of government authority; 
however, recognition enables employers to use products approved by the 
NRTL to meet OSHA standards that require product testing and 
certification.
    The agency processes an application by a NRTL for initial 
recognition and for an expansion or renewal of this recognition, 
following requirements in Appendix A, 29 CFR 1910.7. This appendix 
requires that the agency publish two notices in the Federal Register in 
processing an application. In the first notice, OSHA announces the 
application and provides the preliminary finding. In the second notice, 
the agency provides the final decision on the application. These 
notices set forth the NRTL's scope of recognition or modifications of 
that scope. OSHA maintains an informational web page for each NRTL, 
including CSA, which details the NRTL's scope of recognition. These 
pages are available from the OSHA website at https://www.osha.gov/dts/otpca/nrtl/.
    CSA submitted an application dated September 24, 2021, (OSHA-2006-
0042-0027), to expand their recognition to include four additional test 
standards. This notice covers the expansion to UL 121201 only. The 
remaining standards in that application will be covered in a future 
notice. The standard requested in the expansion application and 
addressed here is a replacement standard for ISA 12.12.01, which is 
currently included in CSA's NRTL Scope of Recognition. OSHA staff 
performed detailed analysis of the application packet and reviewed 
other pertinent information. OSHA did not perform any on-site reviews 
in relation to this application.
    OSHA published the preliminary notice announcing CSA's expansion 
application in the Federal Register on June 17, 2022 (87 FR 36544). The 
agency requested comments by July 5, 2022, but it received no comments 
in response to this notice. OSHA is now proceeding with this final 
grant of expansion of CSA's NRTL recognition.
    To obtain or review copies of all public documents pertaining to 
the CSA's application, go to https://www.regulations.gov or contact the 
Docket Office, Occupational Safety and Health Administration, U.S. 
Department of Labor. Docket No. OSHA-2006-0042 contains all materials 
in the record concerning CSA's recognition. Please note: Due to the 
COVID-19 pandemic, the Docket Office is closed to the public at this 
time but can be contacted at (202) 693-2350.

II. Final Decision and Order

    OSHA staff examined CSA's expansion application, its capability to 
meet the requirements of the test standard, and other pertinent 
information. Based on its review of this evidence, OSHA finds that CSA 
meets the requirements of 29 CFR 1910.7 for expansion of its 
recognition, subject to the limitations and conditions listed in this 
notice. OSHA, therefore, is proceeding with this final notice to grant 
CSA's expanded scope of recognition. OSHA limits the expansion of CSA's 
recognition to testing and certification of products for demonstration 
of conformance to the test standard listed below in Table 1.

 Table 1--List of Appropriate Test Standard for Inclusion in CSA's NRTL
                          Scope of Recognition
------------------------------------------------------------------------
           Test standard                     Test standard title
------------------------------------------------------------------------
UL 121201.........................  Nonincendive Electrical Equipment
                                     for Use in Class I and Class II,
                                     Division 2 and Class III, Divisions
                                     1 and 2 Hazardous (Classified)
                                     Locations.
------------------------------------------------------------------------

    OSHA's recognition of any NRTL for a particular test standard is 
limited to equipment or materials for which OSHA standards require 
third-party testing and certification before using them in the 
workplace. Consequently, if a test standard also covers any products 
for which OSHA does not require such testing and certification, a 
NRTL's scope of recognition does not include these products.

A. Conditions

    Recognition is contingent on continued compliance with 29 CFR 
1910.7, including, but not limited to, abiding by the following 
conditions of the recognition:
    1. CSA must inform OSHA as soon as possible, in writing, of any 
change of ownership, facilities, or key personnel, and of any major 
change in its operations as a NRTL, and provide details of the 
change(s);
    2. CSA must meet all the terms of its recognition and comply with 
all OSHA policies pertaining to this recognition; and
    3. CSA must continue to meet the requirements for recognition, 
including all previously published conditions on CSA's scope of 
recognition, in all areas for which it has recognition.
    Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the 
scope of recognition of CSA as a NRTL, subject to the limitations and 
conditions specified above.

III. Authority and Signature

    James S. Frederick, Deputy Assistant Secretary of Labor for 
Occupational Safety and Health, 200 Constitution Avenue NW, Washington, 
DC 20210, authorized the preparation of this notice. Accordingly, the 
agency is issuing this notice pursuant to Section 29 U.S.C. 657(g)(2), 
Secretary of Labor's Order No. 8-2020 (85 FR 58393; Sept. 18, 2020), 
and 29 CFR 1910.7.

    Signed at Washington, DC, on August 5, 2022.
James S. Frederick,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2022-17880 Filed 8-18-22; 8:45 am]
BILLING CODE 4510-26-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.