Heavy Forged Hand Tools From China; Institution of Five-Year Reviews, 68275-68278 [2021-26073]

Download as PDF lotter on DSK11XQN23PROD with NOTICES1 Federal Register / Vol. 86, No. 228 / Wednesday, December 1, 2021 / Notices (11) If you are a producer, an exporter, or a trade/business association of producers or exporters of the Subject Merchandise in any Subject Country, provide the following information on your firm’s(s’) operations on that product during calendar year 2020 (report quantity data in short tons and value data in U.S. dollars, landed and duty-paid at the U.S. port but not including antidumping or countervailing duties). If you are a trade/business association, provide the information, on an aggregate basis, for the firms which are members of your association. (a) Production (quantity) and, if known, an estimate of the percentage of total production of Subject Merchandise in each Subject Country accounted for by your firm’s(s’) production; (b) Capacity (quantity) of your firm(s) to produce the Subject Merchandise in each Subject Country (that is, the level of production that your establishment(s) could reasonably have expected to attain during the year, assuming normal operating conditions (using equipment and machinery in place and ready to operate), normal operating levels (hours per week/weeks per year), time for downtime, maintenance, repair, and cleanup, and a typical or representative product mix); and (c) the quantity and value of your firm’s(s’) exports to the United States of Subject Merchandise and, if known, an estimate of the percentage of total exports to the United States of Subject Merchandise from each Subject Country accounted for by your firm’s(s’) exports. (12) Identify significant changes, if any, in the supply and demand conditions or business cycle for the Domestic Like Product that have occurred in the United States or in the market for the Subject Merchandise in each Subject Country after 2015, and significant changes, if any, that are likely to occur within a reasonably foreseeable time. Supply conditions to consider include technology; production methods; development efforts; ability to increase production (including the shift of production facilities used for other products and the use, cost, or availability of major inputs into production); and factors related to the ability to shift supply among different national markets (including barriers to importation in foreign markets or changes in market demand abroad). Demand conditions to consider include end uses and applications; the existence and availability of substitute products; and the level of competition among the Domestic Like Product produced in the United States, Subject Merchandise produced in each Subject VerDate Sep<11>2014 17:08 Nov 30, 2021 Jkt 256001 Country, and such merchandise from other countries. (13) (Optional) A statement of whether you agree with the above definitions of the Domestic Like Product and Domestic Industry; if you disagree with either or both of these definitions, please explain why and provide alternative definitions. Authority: This proceeding is being conducted under authority of title VII of the Tariff Act of 1930; this notice is published pursuant to § 207.61 of the Commission’s rules. By order of the Commission. Issued: November 24, 2021. Lisa Barton, Secretary to the Commission. [FR Doc. 2021–26072 Filed 11–30–21; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation Nos. 731–TA–457 (Fifth Review)] Heavy Forged Hand Tools From China; Institution of Five-Year Reviews United States International Trade Commission. ACTION: Notice. AGENCY: The Commission hereby gives notice that it has instituted reviews pursuant to the Tariff Act of 1930 (‘‘the Act’’), as amended, to determine whether revocation of the antidumping duty orders on heavy forged hand tools from China would be likely to lead to continuation or recurrence of material injury. Pursuant to the Act, interested parties are requested to respond to this notice by submitting the information specified below to the Commission. DATES: Instituted December 1, 2021. To be assured of consideration, the deadline for responses is January 3, 2022. Comments on the adequacy of responses may be filed with the Commission by February 10, 2022. FOR FURTHER INFORMATION CONTACT: Lawrence Jones (202–205–3358), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearingimpaired persons can obtain information on this matter by contacting the Commission’s TDD terminal on 202– 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202–205–2000. General information concerning the Commission may also be obtained by accessing its internet server (https:// SUMMARY: PO 00000 Frm 00063 Fmt 4703 Sfmt 4703 68275 www.usitc.gov). The public record for this proceeding may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. SUPPLEMENTARY INFORMATION: Background.— On February 19, 1991, the Department of Commerce (‘‘Commerce’’) issued antidumping duty orders on imports of the following classes or kinds of heavy forged hand tools from China: (1) Axes and adzes, (2) bars and wedges, (3) hammers and sledges, and (4) picks and mattocks (56 FR 6622). Following full first five-year reviews by Commerce and the Commission, effective August 10, 2000, Commerce issued a continuation of the antidumping duty orders on imports of heavy forged hand tools from China (65 FR 48962). Following expedited second, third, and fourth five-year reviews by Commerce and the Commission, Commerce issued continuations of the antidumping duty orders on imports of heavy forged hand tools from China (71 FR 8276, February 16, 2006; 76 FR 52313, August 22, 2011; and 82 FR 1695, January 6, 2017). The Commission is now conducting fifth reviews pursuant to section 751(c) of the Act, as amended (19 U.S.C. 1675(c)), to determine whether revocation of the orders would be likely to lead to continuation or recurrence of material injury to the domestic industry within a reasonably foreseeable time. Provisions concerning the conduct of this proceeding may be found in the Commission’s Rules of Practice and Procedure at 19 CFR part 201, subparts A and B, and 19 CFR part 207, subparts A and F. The Commission will assess the adequacy of interested party responses to this notice of institution to determine whether to conduct full or expedited reviews. The Commission’s determinations in any expedited reviews will be based on the facts available, which may include information provided in response to this notice. Definitions.—The following definitions apply to these reviews: (1) Subject Merchandise is the class or kind of merchandise that is within the scope of the five-year reviews, as defined by Commerce. (2) The Subject Country in these reviews is China. (3) The Domestic Like Product is the domestically produced product or products which are like, or in the absence of like, most similar in characteristics and uses with, the Subject Merchandise. In its original determinations, its full first five-year review determinations, and its expedited second, third, and fourth five- E:\FR\FM\01DEN1.SGM 01DEN1 lotter on DSK11XQN23PROD with NOTICES1 68276 Federal Register / Vol. 86, No. 228 / Wednesday, December 1, 2021 / Notices year review determinations, the Commission found four Domestic Like Products: (1) Axes, adzes and hewing tools, other than machetes, with or without handles; (2) bar tools, track tools and wedges; (3) hammers and sledges, with heads weighing two pounds or more, with or without handles; and (4) picks and mattocks, with or without handles. (4) The Domestic Industry is the U.S. producers as a whole of the Domestic Like Product, or those producers whose collective output of the Domestic Like Product constitutes a major proportion of the total domestic production of the product. In its original determinations, its full first five-year review determinations, and its expedited second, third, and fourth five-year review determinations, the Commission found four Domestic Industries: (1) Domestic producers of axes, adzes and hewing tools, other than machetes, with or without handles; (2) domestic producers of bar tools, track tools, and wedges; (3) domestic producers of hammers and sledges, with heads weighing two pounds or more, with or without handles; and (4) domestic producers of picks and mattocks, with or without handles. In the original investigations, the Commission excluded from the Domestic Industries companies that did no more than assemble imported heads with handles purchased from a domestic manufacturer. The Commission also excluded one domestic producer, Madison Mill, from the Domestic Industries under the related parties provision in the original investigations. In its full first five-year reviews and its expedited second, third, and fourth fiveyear reviews, the Commission did not exclude any company as a related party. (5) An Importer is any person or firm engaged, either directly or through a parent company or subsidiary, in importing the Subject Merchandise into the United States from a foreign manufacturer or through its selling agent. Participation in the proceeding and public service list.—Persons, including industrial users of the Subject Merchandise and, if the merchandise is sold at the retail level, representative consumer organizations, wishing to participate in the proceeding as parties must file an entry of appearance with the Secretary to the Commission, as provided in § 201.11(b)(4) of the Commission’s rules, no later than 21 days after publication of this notice in the Federal Register. The Secretary will maintain a public service list containing the names and addresses of all persons, VerDate Sep<11>2014 17:08 Nov 30, 2021 Jkt 256001 or their representatives, who are parties to the proceeding. Former Commission employees who are seeking to appear in Commission five-year reviews are advised that they may appear in a review even if they participated personally and substantially in the corresponding underlying original investigation or an earlier review of the same underlying investigation. The Commission’s designated agency ethics official has advised that a five-year review is not the same particular matter as the underlying original investigation, and a five-year review is not the same particular matter as an earlier review of the same underlying investigation for purposes of 18 U.S.C. 207, the post-employment statute for Federal employees, and Commission rule 201.15(b) (19 CFR 201.15(b)), 79 FR 3246 (Jan. 17, 2014), 73 FR 24609 (May 5, 2008). Consequently, former employees are not required to seek Commission approval to appear in a review under Commission rule 19 CFR 201.15, even if the corresponding underlying original investigation or an earlier review of the same underlying investigation was pending when they were Commission employees. For further ethics advice on this matter, contact Charles Smith, Office of the General Counsel, at 202– 205–3408. Limited disclosure of business proprietary information (BPI) under an administrative protective order (APO) and APO service list.—Pursuant to § 207.7(a) of the Commission’s rules, the Secretary will make BPI submitted in this proceeding available to authorized applicants under the APO issued in the proceeding, provided that the application is made no later than 21 days after publication of this notice in the Federal Register. Authorized applicants must represent interested parties, as defined in 19 U.S.C. 1677(9), who are parties to the proceeding. A separate service list will be maintained by the Secretary for those parties authorized to receive BPI under the APO. Certification.—Pursuant to § 207.3 of the Commission’s rules, any person submitting information to the Commission in connection with this proceeding must certify that the information is accurate and complete to the best of the submitter’s knowledge. In making the certification, the submitter will acknowledge that information submitted in response to this request for information and throughout this proceeding or other proceeding may be disclosed to and used: (i) By the Commission, its employees and Offices, and contract personnel (a) for PO 00000 Frm 00064 Fmt 4703 Sfmt 4703 developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits, reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C. appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. All contract personnel will sign appropriate nondisclosure agreements. Written submissions.—Pursuant to § 207.61 of the Commission’s rules, each interested party response to this notice must provide the information specified below. The deadline for filing such responses is January 3, 2022. Pursuant to § 207.62(b) of the Commission’s rules, eligible parties (as specified in Commission rule 207.62(b)(1)) may also file comments concerning the adequacy of responses to the notice of institution and whether the Commission should conduct expedited or full reviews. The deadline for filing such comments is February 10, 2022. All written submissions must conform with the provisions of § 201.8 of the Commission’s rules; any submissions that contain BPI must also conform with the requirements of §§ 201.6, 207.3, and 207.7 of the Commission’s rules. The Commission’s Handbook on Filing Procedures, available on the Commission’s website at https:// www.usitc.gov/documents/handbook_ on_filing_procedures.pdf, elaborates upon the Commission’s procedures with respect to filings. Also, in accordance with §§ 201.16(c) and 207.3 of the Commission’s rules, each document filed by a party to the proceeding must be served on all other parties to the proceeding (as identified by either the public or APO service list as appropriate), and a certificate of service must accompany the document (if you are not a party to the proceeding you do not need to serve your response). Please note the Secretary’s Office will accept only electronic filings at this time. Filings must be made through the Commission’s Electronic Document Information System (EDIS, https:// edis.usitc.gov). No in-person paperbased filings or paper copies of any electronic filings will be accepted until further notice. No response to this request for information is required if a currently valid Office of Management and Budget (‘‘OMB’’) number is not displayed; the OMB number is 3117 0016/USITC No. 21–5–505, expiration date June 30, 2023. Public reporting burden for the request is estimated to average 15 hours per response. Please send comments regarding the accuracy of this burden E:\FR\FM\01DEN1.SGM 01DEN1 lotter on DSK11XQN23PROD with NOTICES1 Federal Register / Vol. 86, No. 228 / Wednesday, December 1, 2021 / Notices estimate to the Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Inability to provide requested information.—Pursuant to § 207.61(c) of the Commission’s rules, any interested party that cannot furnish the information requested by this notice in the requested form and manner shall notify the Commission at the earliest possible time, provide a full explanation of why it cannot provide the requested information, and indicate alternative forms in which it can provide equivalent information. If an interested party does not provide this notification (or the Commission finds the explanation provided in the notification inadequate) and fails to provide a complete response to this notice, the Commission may take an adverse inference against the party pursuant to § 776(b) of the Act (19 U.S.C. 1677e(b)) in making its determinations in the reviews. Information to be provided in response to this notice of institution: Please provide the requested information separately for each Domestic Like Product, as defined by the Commission in its original determinations and its first, second, third, and fourth five-year review determinations, and for each of the products identified by Commerce as Subject Merchandise. As used below, the term ‘‘firm’’ includes any related firms. (1) The name and address of your firm or entity (including World Wide Web address) and name, telephone number, fax number, and Email address of the certifying official. (2) A statement indicating whether your firm/entity is an interested party under 19 U.S.C. 1677(9) and if so, how, including whether your firm/entity is a U.S. producer of the Domestic Like Product, a U.S. union or worker group, a U.S. importer of the Subject Merchandise, a foreign producer or exporter of the Subject Merchandise, a U.S. or foreign trade or business association (a majority of whose members are interested parties under the statute), or another interested party (including an explanation). If you are a union/worker group or trade/business association, identify the firms in which your workers are employed or which are members of your association. (3) A statement indicating whether your firm/entity is willing to participate in this proceeding by providing information requested by the Commission. (4) A statement of the likely effects of the revocation of the antidumping duty VerDate Sep<11>2014 17:08 Nov 30, 2021 Jkt 256001 orders on the Domestic Industry in general and/or your firm/entity specifically. In your response, please discuss the various factors specified in section 752(a) of the Act (19 U.S.C. 1675a(a)) including the likely volume of subject imports, likely price effects of subject imports, and likely impact of imports of Subject Merchandise on the Domestic Industry. (5) A list of all known and currently operating U.S. producers of the Domestic Like Product. Identify any known related parties and the nature of the relationship as defined in § 771(4)(B) of the Act (19 U.S.C. 1677(4)(B)). (6) A list of all known and currently operating U.S. importers of the Subject Merchandise and producers of the Subject Merchandise in the Subject Country that currently export or have exported Subject Merchandise to the United States or other countries after 2015. (7) A list of 3–5 leading purchasers in the U.S. market for the Domestic Like Product and the Subject Merchandise (including street address, World Wide Web address, and the name, telephone number, fax number, and Email address of a responsible official at each firm). (8) A list of known sources of information on national or regional prices for the Domestic Like Product or the Subject Merchandise in the U.S. or other markets. (9) If you are a U.S. producer of the Domestic Like Product, provide the following information on your firm’s operations on that product during calendar year 2020, except as noted (report quantity data in units and value data in U.S. dollars, f.o.b. plant). If you are a union/worker group or trade/ business association, provide the information, on an aggregate basis, for the firms in which your workers are employed/which are members of your association. (a) Production (quantity) and, if known, an estimate of the percentage of total U.S. production of the Domestic Like Product accounted for by your firm’s(s’) production; (b) Capacity (quantity) of your firm to produce the Domestic Like Product (that is, the level of production that your establishment(s) could reasonably have expected to attain during the year, assuming normal operating conditions (using equipment and machinery in place and ready to operate), normal operating levels (hours per week/weeks per year), time for downtime, maintenance, repair, and cleanup, and a typical or representative product mix); (c) the quantity and value of U.S. commercial shipments of the Domestic PO 00000 Frm 00065 Fmt 4703 Sfmt 4703 68277 Like Product produced in your U.S. plant(s); (d) the quantity and value of U.S. internal consumption/company transfers of the Domestic Like Product produced in your U.S. plant(s); and (e) the value of (i) net sales, (ii) cost of goods sold (COGS), (iii) gross profit, (iv) selling, general and administrative (SG&A) expenses, and (v) operating income of the Domestic Like Product produced in your U.S. plant(s) (include both U.S. and export commercial sales, internal consumption, and company transfers) for your most recently completed fiscal year (identify the date on which your fiscal year ends). (10) If you are a U.S. importer or a trade/business association of U.S. importers of the Subject Merchandise from the Subject Country, provide the following information on your firm’s(s’) operations on that product during calendar year 2020 (report quantity data in units and value data in U.S. dollars). If you are a trade/business association, provide the information, on an aggregate basis, for the firms which are members of your association. (a) The quantity and value (landed, duty-paid but not including antidumping duties) of U.S. imports and, if known, an estimate of the percentage of total U.S. imports of Subject Merchandise from the Subject Country accounted for by your firm’s(s’) imports; (b) the quantity and value (f.o.b. U.S. port, including antidumping duties) of U.S. commercial shipments of Subject Merchandise imported from the Subject Country; and (c) the quantity and value (f.o.b. U.S. port, including antidumping duties) of U.S. internal consumption/company transfers of Subject Merchandise imported from the Subject Country. (11) If you are a producer, an exporter, or a trade/business association of producers or exporters of the Subject Merchandise in the Subject Country, provide the following information on your firm’s(s’) operations on that product during calendar year 2020 (report quantity data in units and value data in U.S. dollars, landed and dutypaid at the U.S. port but not including antidumping duties). If you are a trade/ business association, provide the information, on an aggregate basis, for the firms which are members of your association. (a) Production (quantity) and, if known, an estimate of the percentage of total production of Subject Merchandise in the Subject Country accounted for by your firm’s(s’) production; (b) Capacity (quantity) of your firm(s) to produce the Subject Merchandise in E:\FR\FM\01DEN1.SGM 01DEN1 lotter on DSK11XQN23PROD with NOTICES1 68278 Federal Register / Vol. 86, No. 228 / Wednesday, December 1, 2021 / Notices the Subject Country (that is, the level of production that your establishment(s) could reasonably have expected to attain during the year, assuming normal operating conditions (using equipment and machinery in place and ready to operate), normal operating levels (hours per week/weeks per year), time for downtime, maintenance, repair, and cleanup, and a typical or representative product mix); and (c) the quantity and value of your firm’s(s’) exports to the United States of Subject Merchandise and, if known, an estimate of the percentage of total exports to the United States of Subject Merchandise from the Subject Country accounted for by your firm’s(s’) exports. (12) Identify significant changes, if any, in the supply and demand conditions or business cycle for the Domestic Like Product that have occurred in the United States or in the market for the Subject Merchandise in the Subject Country after 2015, and significant changes, if any, that are likely to occur within a reasonably foreseeable time. Supply conditions to consider include technology; production methods; development efforts; ability to increase production (including the shift of production facilities used for other products and the use, cost, or availability of major inputs into production); and factors related to the ability to shift supply among different national markets (including barriers to importation in foreign markets or changes in market demand abroad). Demand conditions to consider include end uses and applications; the existence and availability of substitute products; and the level of competition among the Domestic Like Product produced in the United States, Subject Merchandise produced in the Subject Country, and such merchandise from other countries. (13) (Optional) A statement of whether you agree with the above definitions of the Domestic Like Product and Domestic Industry; if you disagree with either or both of these definitions, please explain why and provide alternative definitions. Authority: This proceeding is being conducted under authority of title VII of the Tariff Act of 1930; this notice is published pursuant to § 207.61 of the Commission’s rules. By order of the Commission. Issued: November 24, 2021. Lisa Barton, Secretary to the Commission. [FR Doc. 2021–26073 Filed 11–30–21; 8:45 am] BILLING CODE 7020–02–P VerDate Sep<11>2014 17:32 Nov 30, 2021 Jkt 256001 INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701–TA–379 and 731– TA–788, 792, and 793 (Fourth Review)] Stainless Steel Plate From Belgium, South Africa, and Taiwan; Institution of Five-Year Reviews United States International Trade Commission. ACTION: Notice. AGENCY: The Commission hereby gives notice that it has instituted reviews pursuant to the Tariff Act of 1930 (‘‘the Act’’), as amended, to determine whether revocation of the countervailing duty order on stainless steel plate from South Africa and the antidumping duty orders on stainless steel plate from Belgium, South Africa, and Taiwan would be likely to lead to continuation or recurrence of material injury. Pursuant to the Act, interested parties are requested to respond to this notice by submitting the information specified below to the Commission. DATES: Instituted December 1, 2021. To be assured of consideration, the deadline for responses is January 3, 2022. Comments on the adequacy of responses may be filed with the Commission by February 8, 2022. FOR FURTHER INFORMATION CONTACT: Lawrence Jones (202–205–3358), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearingimpaired persons can obtain information on this matter by contacting the Commission’s TDD terminal on 202– 205–1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202–205–2000. General information concerning the Commission may also be obtained by accessing its internet server (https:// www.usitc.gov). The public record for this proceeding may be viewed on the Commission’s electronic docket (EDIS) at https://edis.usitc.gov. SUPPLEMENTARY INFORMATION: Background.—On May 11, 1999, the Department of Commerce (‘‘Commerce’’) issued a countervailing duty order on imports of certain stainless steel plate from South Africa (64 FR 25288). On May 21, 1999, Commerce issued antidumping duty orders on imports of certain stainless steel plate from Belgium, South Africa, and Taiwan (64 FR 27756). On March 11, 2003, as a result of intervening litigation of the Commission’s original determinations, Commerce amended those antidumping SUMMARY: PO 00000 Frm 00066 Fmt 4703 Sfmt 4703 and countervailing duty orders on imports of certain stainless steel plate to remove the original language that excluded cold-rolled stainless steel plate in coils (68 FR 11520 and 68 FR 11524). Following full first and second five-year reviews and expedited third five-year reviews by Commerce and the Commission, Commerce issued continuations of the countervailing duty order on imports of stainless steel plate from South Africa and the antidumping duty orders on imports of stainless steel plate from Belgium, South Africa, and Taiwan (70 FR 41202, July 18, 2005; 76 FR 53882, August 30, 2011; and 82 FR 2322, January 9, 2017). The Commission is now conducting fourth five-year reviews pursuant to section 751(c) of the Act, as amended (19 U.S.C. 1675(c)), to determine whether revocation of the orders would be likely to lead to continuation or recurrence of material injury to the domestic industry within a reasonably foreseeable time. Provisions concerning the conduct of this proceeding may be found in the Commission’s Rules of Practice and Procedure at 19 CFR part 201, subparts A and B, and 19 CFR part 207, subparts A and F. The Commission will assess the adequacy of interested party responses to this notice of institution to determine whether to conduct full or expedited reviews. The Commission’s determinations in any expedited reviews will be based on the facts available, which may include information provided in response to this notice. Definitions.—The following definitions apply to these reviews: (1) Subject Merchandise is the class or kind of merchandise that is within the scope of the five-year reviews, as defined by Commerce. (2) The Subject Countries in these reviews are Belgium, South Africa, and Taiwan. (3) The Domestic Like Product is the domestically produced product or products which are like, or in the absence of like, most similar in characteristics and uses with, the Subject Merchandise. In its original determinations after remand, its full first and second five-year review determinations, and its expedited third five-year review determinations, the Commission defined a single Domestic Like Product as certain (hot-rolled and cold-rolled) stainless steel plate in coils, coextensive with Commerce’s scope definition. Certain Commissioners defined the Domestic Like Product differently in the original determinations. While the Commission majority in the original determinations defined two separate Domestic Like E:\FR\FM\01DEN1.SGM 01DEN1

Agencies

[Federal Register Volume 86, Number 228 (Wednesday, December 1, 2021)]
[Notices]
[Pages 68275-68278]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-26073]


-----------------------------------------------------------------------

INTERNATIONAL TRADE COMMISSION

[Investigation Nos. 731-TA-457 (Fifth Review)]


Heavy Forged Hand Tools From China; Institution of Five-Year 
Reviews

AGENCY: United States International Trade Commission.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Commission hereby gives notice that it has instituted 
reviews pursuant to the Tariff Act of 1930 (``the Act''), as amended, 
to determine whether revocation of the antidumping duty orders on heavy 
forged hand tools from China would be likely to lead to continuation or 
recurrence of material injury. Pursuant to the Act, interested parties 
are requested to respond to this notice by submitting the information 
specified below to the Commission.

DATES: Instituted December 1, 2021. To be assured of consideration, the 
deadline for responses is January 3, 2022. Comments on the adequacy of 
responses may be filed with the Commission by February 10, 2022.

FOR FURTHER INFORMATION CONTACT: Lawrence Jones (202-205-3358), Office 
of Investigations, U.S. International Trade Commission, 500 E Street 
SW, Washington, DC 20436. Hearing-impaired persons can obtain 
information on this matter by contacting the Commission's TDD terminal 
on 202-205-1810. Persons with mobility impairments who will need 
special assistance in gaining access to the Commission should contact 
the Office of the Secretary at 202-205-2000. General information 
concerning the Commission may also be obtained by accessing its 
internet server (https://www.usitc.gov). The public record for this 
proceeding may be viewed on the Commission's electronic docket (EDIS) 
at https://edis.usitc.gov.

SUPPLEMENTARY INFORMATION: 
    Background.-- On February 19, 1991, the Department of Commerce 
(``Commerce'') issued antidumping duty orders on imports of the 
following classes or kinds of heavy forged hand tools from China: (1) 
Axes and adzes, (2) bars and wedges, (3) hammers and sledges, and (4) 
picks and mattocks (56 FR 6622). Following full first five-year reviews 
by Commerce and the Commission, effective August 10, 2000, Commerce 
issued a continuation of the antidumping duty orders on imports of 
heavy forged hand tools from China (65 FR 48962). Following expedited 
second, third, and fourth five-year reviews by Commerce and the 
Commission, Commerce issued continuations of the antidumping duty 
orders on imports of heavy forged hand tools from China (71 FR 8276, 
February 16, 2006; 76 FR 52313, August 22, 2011; and 82 FR 1695, 
January 6, 2017). The Commission is now conducting fifth reviews 
pursuant to section 751(c) of the Act, as amended (19 U.S.C. 1675(c)), 
to determine whether revocation of the orders would be likely to lead 
to continuation or recurrence of material injury to the domestic 
industry within a reasonably foreseeable time. Provisions concerning 
the conduct of this proceeding may be found in the Commission's Rules 
of Practice and Procedure at 19 CFR part 201, subparts A and B, and 19 
CFR part 207, subparts A and F. The Commission will assess the adequacy 
of interested party responses to this notice of institution to 
determine whether to conduct full or expedited reviews. The 
Commission's determinations in any expedited reviews will be based on 
the facts available, which may include information provided in response 
to this notice.
    Definitions.--The following definitions apply to these reviews:
    (1) Subject Merchandise is the class or kind of merchandise that is 
within the scope of the five-year reviews, as defined by Commerce.
    (2) The Subject Country in these reviews is China.
    (3) The Domestic Like Product is the domestically produced product 
or products which are like, or in the absence of like, most similar in 
characteristics and uses with, the Subject Merchandise. In its original 
determinations, its full first five-year review determinations, and its 
expedited second, third, and fourth five-

[[Page 68276]]

year review determinations, the Commission found four Domestic Like 
Products: (1) Axes, adzes and hewing tools, other than machetes, with 
or without handles; (2) bar tools, track tools and wedges; (3) hammers 
and sledges, with heads weighing two pounds or more, with or without 
handles; and (4) picks and mattocks, with or without handles.
    (4) The Domestic Industry is the U.S. producers as a whole of the 
Domestic Like Product, or those producers whose collective output of 
the Domestic Like Product constitutes a major proportion of the total 
domestic production of the product. In its original determinations, its 
full first five-year review determinations, and its expedited second, 
third, and fourth five-year review determinations, the Commission found 
four Domestic Industries: (1) Domestic producers of axes, adzes and 
hewing tools, other than machetes, with or without handles; (2) 
domestic producers of bar tools, track tools, and wedges; (3) domestic 
producers of hammers and sledges, with heads weighing two pounds or 
more, with or without handles; and (4) domestic producers of picks and 
mattocks, with or without handles. In the original investigations, the 
Commission excluded from the Domestic Industries companies that did no 
more than assemble imported heads with handles purchased from a 
domestic manufacturer. The Commission also excluded one domestic 
producer, Madison Mill, from the Domestic Industries under the related 
parties provision in the original investigations. In its full first 
five-year reviews and its expedited second, third, and fourth five-year 
reviews, the Commission did not exclude any company as a related party.
    (5) An Importer is any person or firm engaged, either directly or 
through a parent company or subsidiary, in importing the Subject 
Merchandise into the United States from a foreign manufacturer or 
through its selling agent.
    Participation in the proceeding and public service list.--Persons, 
including industrial users of the Subject Merchandise and, if the 
merchandise is sold at the retail level, representative consumer 
organizations, wishing to participate in the proceeding as parties must 
file an entry of appearance with the Secretary to the Commission, as 
provided in Sec.  201.11(b)(4) of the Commission's rules, no later than 
21 days after publication of this notice in the Federal Register. The 
Secretary will maintain a public service list containing the names and 
addresses of all persons, or their representatives, who are parties to 
the proceeding.
    Former Commission employees who are seeking to appear in Commission 
five-year reviews are advised that they may appear in a review even if 
they participated personally and substantially in the corresponding 
underlying original investigation or an earlier review of the same 
underlying investigation. The Commission's designated agency ethics 
official has advised that a five-year review is not the same particular 
matter as the underlying original investigation, and a five-year review 
is not the same particular matter as an earlier review of the same 
underlying investigation for purposes of 18 U.S.C. 207, the post-
employment statute for Federal employees, and Commission rule 201.15(b) 
(19 CFR 201.15(b)), 79 FR 3246 (Jan. 17, 2014), 73 FR 24609 (May 5, 
2008). Consequently, former employees are not required to seek 
Commission approval to appear in a review under Commission rule 19 CFR 
201.15, even if the corresponding underlying original investigation or 
an earlier review of the same underlying investigation was pending when 
they were Commission employees. For further ethics advice on this 
matter, contact Charles Smith, Office of the General Counsel, at 202-
205-3408.
    Limited disclosure of business proprietary information (BPI) under 
an administrative protective order (APO) and APO service list.--
Pursuant to Sec.  207.7(a) of the Commission's rules, the Secretary 
will make BPI submitted in this proceeding available to authorized 
applicants under the APO issued in the proceeding, provided that the 
application is made no later than 21 days after publication of this 
notice in the Federal Register. Authorized applicants must represent 
interested parties, as defined in 19 U.S.C. 1677(9), who are parties to 
the proceeding. A separate service list will be maintained by the 
Secretary for those parties authorized to receive BPI under the APO.
    Certification.--Pursuant to Sec.  207.3 of the Commission's rules, 
any person submitting information to the Commission in connection with 
this proceeding must certify that the information is accurate and 
complete to the best of the submitter's knowledge. In making the 
certification, the submitter will acknowledge that information 
submitted in response to this request for information and throughout 
this proceeding or other proceeding may be disclosed to and used: (i) 
By the Commission, its employees and Offices, and contract personnel 
(a) for developing or maintaining the records of this or a related 
proceeding, or (b) in internal investigations, audits, reviews, and 
evaluations relating to the programs, personnel, and operations of the 
Commission including under 5 U.S.C. appendix 3; or (ii) by U.S. 
government employees and contract personnel, solely for cybersecurity 
purposes. All contract personnel will sign appropriate nondisclosure 
agreements.
    Written submissions.--Pursuant to Sec.  207.61 of the Commission's 
rules, each interested party response to this notice must provide the 
information specified below. The deadline for filing such responses is 
January 3, 2022. Pursuant to Sec.  207.62(b) of the Commission's rules, 
eligible parties (as specified in Commission rule 207.62(b)(1)) may 
also file comments concerning the adequacy of responses to the notice 
of institution and whether the Commission should conduct expedited or 
full reviews. The deadline for filing such comments is February 10, 
2022. All written submissions must conform with the provisions of Sec.  
201.8 of the Commission's rules; any submissions that contain BPI must 
also conform with the requirements of Sec. Sec.  201.6, 207.3, and 
207.7 of the Commission's rules. The Commission's Handbook on Filing 
Procedures, available on the Commission's website at https://www.usitc.gov/documents/handbook_on_filing_procedures.pdf, elaborates 
upon the Commission's procedures with respect to filings. Also, in 
accordance with Sec. Sec.  201.16(c) and 207.3 of the Commission's 
rules, each document filed by a party to the proceeding must be served 
on all other parties to the proceeding (as identified by either the 
public or APO service list as appropriate), and a certificate of 
service must accompany the document (if you are not a party to the 
proceeding you do not need to serve your response).
    Please note the Secretary's Office will accept only electronic 
filings at this time. Filings must be made through the Commission's 
Electronic Document Information System (EDIS, https://edis.usitc.gov). 
No in-person paper-based filings or paper copies of any electronic 
filings will be accepted until further notice.
    No response to this request for information is required if a 
currently valid Office of Management and Budget (``OMB'') number is not 
displayed; the OMB number is 3117 0016/USITC No. 21-5-505, expiration 
date June 30, 2023. Public reporting burden for the request is 
estimated to average 15 hours per response. Please send comments 
regarding the accuracy of this burden

[[Page 68277]]

estimate to the Office of Investigations, U.S. International Trade 
Commission, 500 E Street SW, Washington, DC 20436.
    Inability to provide requested information.--Pursuant to Sec.  
207.61(c) of the Commission's rules, any interested party that cannot 
furnish the information requested by this notice in the requested form 
and manner shall notify the Commission at the earliest possible time, 
provide a full explanation of why it cannot provide the requested 
information, and indicate alternative forms in which it can provide 
equivalent information. If an interested party does not provide this 
notification (or the Commission finds the explanation provided in the 
notification inadequate) and fails to provide a complete response to 
this notice, the Commission may take an adverse inference against the 
party pursuant to Sec.  776(b) of the Act (19 U.S.C. 1677e(b)) in 
making its determinations in the reviews.
    Information to be provided in response to this notice of 
institution: Please provide the requested information separately for 
each Domestic Like Product, as defined by the Commission in its 
original determinations and its first, second, third, and fourth five-
year review determinations, and for each of the products identified by 
Commerce as Subject Merchandise. As used below, the term ``firm'' 
includes any related firms.
    (1) The name and address of your firm or entity (including World 
Wide Web address) and name, telephone number, fax number, and Email 
address of the certifying official.
    (2) A statement indicating whether your firm/entity is an 
interested party under 19 U.S.C. 1677(9) and if so, how, including 
whether your firm/entity is a U.S. producer of the Domestic Like 
Product, a U.S. union or worker group, a U.S. importer of the Subject 
Merchandise, a foreign producer or exporter of the Subject Merchandise, 
a U.S. or foreign trade or business association (a majority of whose 
members are interested parties under the statute), or another 
interested party (including an explanation). If you are a union/worker 
group or trade/business association, identify the firms in which your 
workers are employed or which are members of your association.
    (3) A statement indicating whether your firm/entity is willing to 
participate in this proceeding by providing information requested by 
the Commission.
    (4) A statement of the likely effects of the revocation of the 
antidumping duty orders on the Domestic Industry in general and/or your 
firm/entity specifically. In your response, please discuss the various 
factors specified in section 752(a) of the Act (19 U.S.C. 1675a(a)) 
including the likely volume of subject imports, likely price effects of 
subject imports, and likely impact of imports of Subject Merchandise on 
the Domestic Industry.
    (5) A list of all known and currently operating U.S. producers of 
the Domestic Like Product. Identify any known related parties and the 
nature of the relationship as defined in Sec.  771(4)(B) of the Act (19 
U.S.C. 1677(4)(B)).
    (6) A list of all known and currently operating U.S. importers of 
the Subject Merchandise and producers of the Subject Merchandise in the 
Subject Country that currently export or have exported Subject 
Merchandise to the United States or other countries after 2015.
    (7) A list of 3-5 leading purchasers in the U.S. market for the 
Domestic Like Product and the Subject Merchandise (including street 
address, World Wide Web address, and the name, telephone number, fax 
number, and Email address of a responsible official at each firm).
    (8) A list of known sources of information on national or regional 
prices for the Domestic Like Product or the Subject Merchandise in the 
U.S. or other markets.
    (9) If you are a U.S. producer of the Domestic Like Product, 
provide the following information on your firm's operations on that 
product during calendar year 2020, except as noted (report quantity 
data in units and value data in U.S. dollars, f.o.b. plant). If you are 
a union/worker group or trade/business association, provide the 
information, on an aggregate basis, for the firms in which your workers 
are employed/which are members of your association.
    (a) Production (quantity) and, if known, an estimate of the 
percentage of total U.S. production of the Domestic Like Product 
accounted for by your firm's(s') production;
    (b) Capacity (quantity) of your firm to produce the Domestic Like 
Product (that is, the level of production that your establishment(s) 
could reasonably have expected to attain during the year, assuming 
normal operating conditions (using equipment and machinery in place and 
ready to operate), normal operating levels (hours per week/weeks per 
year), time for downtime, maintenance, repair, and cleanup, and a 
typical or representative product mix);
    (c) the quantity and value of U.S. commercial shipments of the 
Domestic Like Product produced in your U.S. plant(s);
    (d) the quantity and value of U.S. internal consumption/company 
transfers of the Domestic Like Product produced in your U.S. plant(s); 
and
    (e) the value of (i) net sales, (ii) cost of goods sold (COGS), 
(iii) gross profit, (iv) selling, general and administrative (SG&A) 
expenses, and (v) operating income of the Domestic Like Product 
produced in your U.S. plant(s) (include both U.S. and export commercial 
sales, internal consumption, and company transfers) for your most 
recently completed fiscal year (identify the date on which your fiscal 
year ends).
    (10) If you are a U.S. importer or a trade/business association of 
U.S. importers of the Subject Merchandise from the Subject Country, 
provide the following information on your firm's(s') operations on that 
product during calendar year 2020 (report quantity data in units and 
value data in U.S. dollars). If you are a trade/business association, 
provide the information, on an aggregate basis, for the firms which are 
members of your association.
    (a) The quantity and value (landed, duty-paid but not including 
antidumping duties) of U.S. imports and, if known, an estimate of the 
percentage of total U.S. imports of Subject Merchandise from the 
Subject Country accounted for by your firm's(s') imports;
    (b) the quantity and value (f.o.b. U.S. port, including antidumping 
duties) of U.S. commercial shipments of Subject Merchandise imported 
from the Subject Country; and
    (c) the quantity and value (f.o.b. U.S. port, including antidumping 
duties) of U.S. internal consumption/company transfers of Subject 
Merchandise imported from the Subject Country.
    (11) If you are a producer, an exporter, or a trade/business 
association of producers or exporters of the Subject Merchandise in the 
Subject Country, provide the following information on your firm's(s') 
operations on that product during calendar year 2020 (report quantity 
data in units and value data in U.S. dollars, landed and duty-paid at 
the U.S. port but not including antidumping duties). If you are a 
trade/business association, provide the information, on an aggregate 
basis, for the firms which are members of your association.
    (a) Production (quantity) and, if known, an estimate of the 
percentage of total production of Subject Merchandise in the Subject 
Country accounted for by your firm's(s') production;
    (b) Capacity (quantity) of your firm(s) to produce the Subject 
Merchandise in

[[Page 68278]]

the Subject Country (that is, the level of production that your 
establishment(s) could reasonably have expected to attain during the 
year, assuming normal operating conditions (using equipment and 
machinery in place and ready to operate), normal operating levels 
(hours per week/weeks per year), time for downtime, maintenance, 
repair, and cleanup, and a typical or representative product mix); and
    (c) the quantity and value of your firm's(s') exports to the United 
States of Subject Merchandise and, if known, an estimate of the 
percentage of total exports to the United States of Subject Merchandise 
from the Subject Country accounted for by your firm's(s') exports.
    (12) Identify significant changes, if any, in the supply and demand 
conditions or business cycle for the Domestic Like Product that have 
occurred in the United States or in the market for the Subject 
Merchandise in the Subject Country after 2015, and significant changes, 
if any, that are likely to occur within a reasonably foreseeable time. 
Supply conditions to consider include technology; production methods; 
development efforts; ability to increase production (including the 
shift of production facilities used for other products and the use, 
cost, or availability of major inputs into production); and factors 
related to the ability to shift supply among different national markets 
(including barriers to importation in foreign markets or changes in 
market demand abroad). Demand conditions to consider include end uses 
and applications; the existence and availability of substitute 
products; and the level of competition among the Domestic Like Product 
produced in the United States, Subject Merchandise produced in the 
Subject Country, and such merchandise from other countries.
    (13) (Optional) A statement of whether you agree with the above 
definitions of the Domestic Like Product and Domestic Industry; if you 
disagree with either or both of these definitions, please explain why 
and provide alternative definitions.
    Authority: This proceeding is being conducted under authority of 
title VII of the Tariff Act of 1930; this notice is published pursuant 
to Sec.  207.61 of the Commission's rules.

    By order of the Commission.

    Issued: November 24, 2021.
Lisa Barton,
Secretary to the Commission.
[FR Doc. 2021-26073 Filed 11-30-21; 8:45 am]
BILLING CODE 7020-02-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.