Incorporation by Reference; Notice of Corrections, 54611-54615 [2021-20099]
Download as PDF
<![CDATA[
Federal Register / Vol. 86, No. 189 / Monday, October 4, 2021 / Rules and Regulations
Authority: 44 U.S.C. 3501–3520.
■
2. Revise § 389.101 to read as follows:
§ 389.101 OMB control numbers assigned
pursuant to the Paperwork Reduction Act.
This part concerns Office of
Management and Budget (OMB) control
numbers assigned to information
collection requirements. Current OMB
control numbers are available at https://
www.ferc.gov. For the most current
information, interested persons should
consult the Commission’s website under
‘‘Enforcement Legal’’ and then ‘‘Legal’’
and then ‘‘Information Collections’’ or
directly at https://www.ferc.gov/
enforcement-legal/legal/informationcollections.
[FR Doc. 2021–21153 Filed 10–1–21; 8:45 am]
BILLING CODE 6717–01–P
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
Based on National Consensus
Standards, Personal Protective
Equipment; Updating OSHA Standards
Based on National Consensus
Standards, Eye and Face Protection; and
Standards Improvement Project-Phase
IV. The notice also updates contact
information for a government agency
and consensus organizations in the
Incorporation by Reference section and
adjusts the codification to meet Office of
the Federal Register requirements.
DATES: Effective October 4, 2021.
FOR FURTHER INFORMATION CONTACT:
Press inquiries: Frank Meilinger,
Director, OSHA Office of
Communications; telephone: (202) 693–
1999; email: meilinger.francis2@dol.gov.
General and technical information:
Amy Wangdahl, Director, Office of
Maritime and Agriculture, OSHA
Directorate of Standards and Guidance;
telephone: (202) 693–2066; email:
wangdahl.amy@dol.gov.
SUPPLEMENTARY INFORMATION:
I. Summary and Explanation
29 CFR Part 1915
Incorporation by Reference; Notice of
Corrections
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Final rule; correcting
amendments.
AGENCY:
OSHA is making minor
corrections to the Incorporation by
Reference (IBR) section for Maritime
due to inadvertent mistakes in three
final rules: Updating OSHA Standards
SUMMARY:
OSHA published three final rules
containing inadvertent errors in the
Incorporation by Reference section for
Maritime, § 1915.5. The final rules were
Updating OSHA Standards Based on
National Consensus Standards, Personal
Protective Equipment, published
September 9, 2009 (74 FR 46350);
Updating OSHA Standards Based on
National Consensus Standards, Eye and
Face Protection, published March 25,
2016 (81 FR 16085); and Standards
Improvement Project-Phase IV,
published May 14, 2019 (84 FR 21416).
54611
The agency is submitting this document
to correct errors in these three final
rules that included numerical and
typographical errors, as well as move
paragraph § 1915.5 (c) to paragraph
(b)(3), so that all incorporation by
reference (IBR) approval and contact
language is contained in one paragraph
(see 1 CFR part 51 and the Office of the
Federal Register’s (OFR’s) IBR
Handbook). In addition, this document
updates the contact information for the
National Archives and Records
Administration (NARA) in former
§ 1915.5(c), National Safety Council in
§ 1915.5(d)(4) and (5), IHS Standards
Store in § 1915.5(d)(6)(ii), (7)(ii) and
(8)(ii), TechStreet Store in
§ 1915.5(d)(6)(iii), (7)(iii) and (8)(iii),
International Safety Equipment
Association (ISEA) in § 1915.5(d)(9) to
(11), and American Society of
Mechanical Engineers (ASME) in
§ 1915.5(e), American Conference of
Governmental Industrial Hygienists
(ACGIH) in § 1915.5(f), National Fire
Protection Association (NFPA) in former
§ 1915.5(f)(1)(i), and ASTM
International in § 1915.5(g). Paragraphs
§ 1915.5 (d)(7) and (d)(8) incorrectly
cross-referenced part 1910 instead of
part 1915. All of paragraph (f)(1)(i) was
out of sequence and renumbered as
paragraph (i). Table 1 summarizes the
errors, omission, and updates by
paragraph for § 1915.5. Additional
revisions to meet Office of the Federal
Register requirements, such as the
removal of full paragraph citations for
outlying sections, are included in the
revision and republishing of § 1915.5.
TABLE 1—SUMMARY OF REVISIONS
Current language
Corrected language
Explanation
1915.5(b)(3)—Currently paragraph (c) Copies
of standards listed in this section and issued
by private standards organizations are available for purchase from the issuing organizations at the addresses or through the other
contact information listed below for these private standards organizations. In addition, the
standards are available for inspection at any
Regional Office of the Occupational Safety
and Health Administration (OSHA), or at the
OSHA Docket Office, U.S. Department of
Labor, 200 Constitution Avenue NW, Room
N–3508, Washington, DC 20210; telephone:
202–693–2350 (TTY number: 877–889–
5627). These standards are also available for
inspection at the National Archives and
Records Administration (NARA). For information on the availability of these standards at
NARA, telephone: 202–741–6030, or go to
www.archives.gov/federalregister/cfr/ibr-locations.html.
1915.5(b)(3) Copies of standards listed in this
section and issued by private standards organizations are available for purchase from
the issuing organizations at the addresses
or through the other contact information listed elsewhere in this section for these private standards organizations. In addition,
the standards are available for inspection at
any Regional Office of the Occupational
Safety and Health Administration (OSHA),
or at the OSHA Docket Office, U.S. Department of Labor, 200 Constitution Avenue
NW, Room N–3508, Washington, DC
20210; telephone: 202–693–2350 (TTY
number: 877–889–5627). These standards
are also available for inspection at the National Archives and Records Administration
(NARA). For information on the availability
of these standards at NARA, email
fr.inspection@nara.gov, or go to
www.archives.gov/federal-register/cfr/ibr-locations.html.
Paragraph (c), which contains availability and
contact information for OSHA, is redesignated paragraph (b)(3), so that all required
approval and availability language is in a
single paragraph, following OFR’s IBR requirements. Update contact information for
the NARA IBR.
VerDate Sep<11>2014
16:13 Oct 01, 2021
Jkt 256001
PO 00000
Frm 00025
Fmt 4700
Sfmt 4700
E:\FR\FM\04OCR1.SGM
04OCR1
54612
Federal Register / Vol. 86, No. 189 / Monday, October 4, 2021 / Rules and Regulations
TABLE 1—SUMMARY OF REVISIONS—Continued
Current language
Corrected language
Explanation
1915.5(d)(4) ANSI Z41–1999, American National Standard for Personal Protection-Protective Footwear; IBR approved for
§ 1915.156(b)(1)(ii). Copies of ANSI Z41–
1999 are available for purchase only from the
National Safety Council, P.O. Box 558,
Itasca, IL 60143–0558; telephone: 1–800–
621–7619; fax: 708–285–0797; website:
https://www.nsc.org.
1915.5(d)(5) ANSI Z41–1991, American National Standard for Personal Protection-Protective Footwear; IBR approved for
§ 1915.156(b)(1)(iii). Copies of ANSI Z41–
1991 are available for purchase only from the
National Safety Council, P.O. Box 558,
Itasca, IL 60143–0558; telephone: 1–800–
621–7619; fax: 708–285–0797; website:
https://www.nsc.org.
1915.5(d)(6)(ii), (7)(ii), and (8)(ii) IHS Standards
Store, 15 Inverness Way East, Englewood,
CO 80112; telephone: (877) 413–5184;
website: https://global.ihs.com; or
1915.5(d)(6)(iii), (7)(iii), and (8)(iii) TechStreet
Store, 3916 Ranchero Dr., Ann Arbor, MI
48108; telephone: (877) 699–9277; website:
https://techstreet.com.
1915.5(d)(7) ANSI Z87.1–2003, Occupational
and Educational Personal Eye and Face Protection Devices, approved June 19, 2003;
IBR approved for § 1910.153(b). * * *
1915.5(d)(4) ANSI Z41–1999, American National Standard for Personal Protection—
Protective Footwear; IBR approved for
§ 1915.156(b). Copies of ANSI Z41–1999
are available for purchase only from the
National Safety Council, 1121 Spring Lake
Drive, Itasca, IL 60143–3201; telephone:
(800) 621–7619; fax: 630–285–1434;
website: www.nsc.org.
1915.5(d)(5) ANSI Z41–1991, American National Standard for Personal Protection—
Protective Footwear; IBR approved for
§ 1915.156(b). Copies of ANSI Z41–1991
are available for purchase only from the
National Safety Council, 1121 Spring Lake
Drive, Itasca, IL 60143–3201; telephone:
(800) 621–7619; fax: 630–285–1434;
website: www.nsc.org.
1915.5(d)(6)(ii), (7)(ii), and (8)(ii) IHS Standards Store, 15 Inverness Way East, Englewood, CO 80112; telephone: (800) 447–
2273; website: https://global.ihs.com; or
1915.5(d)(6)(iii), (7)(iii), and (8)(iii) TechStreet
Store, 3025 Boardwalk Drive, Suite 220,
Ann Arbor, MI 48108; telephone: (855)
999–9870; website: www.techstreet.com.
1915.5(d)(7) ANSI Z87.1–2003, Occupational
and Educational Personal Eye and Face
Protection Devices, approved June 19,
2003; IBR approved for § 1915.153(b).
* * *
1915.5(d)(8) ANSI Z87.1–1989 (R–1998),
Practice for Occupational and Educational
Eye and Face Protection, Reaffirmation approved January 4, 1999; IBR approved for
§ 1915.153(b). * * *
1915.5(d)(9) American National Standards Institute (ANSI) Z89.1–2009, American National Standard for Industrial Head Protection, approved January 26, 2009; IBR approved for § 1915.155(b). Copies of ANSI
Z89.1–2009 are available for purchase only
from the International Safety Equipment Association, 1101 Wilson Boulevard, Suite
1425, Arlington, VA 22209–1762; telephone: 703–525–1695; fax: 703–528–2148;
website: www.safetyequipment.org.
1915.5(d)(10) American National Standards
Institute (ANSI) Z89.1–2003, American National Standard for Industrial Head Protection; IBR approved for § 1915.155(b). Copies of ANSI Z89.1–2003 are available for
purchase only from the International Safety
Equipment Association, 1101 Wilson Boulevard, Suite 1425, Arlington, VA 22209–
1762; telephone: 703–525–1695; fax: 703–
528–2148; website:
www.safetyequipment.org.
1915.5(d)(11) American National Standards
Institute (ANSI) Z89.1–1997, American National Standard for Personnel Protection—
Protective Headwear for Industrial Workers—Requirements; IBR approved for
§ 1915.155(b). Copies of ANSI Z89.1–1997
are available for purchase only from the
International Safety Equipment Association,
1101 Wilson Boulevard, Suite 1425, Arlington, VA 22209–1762; telephone: 703–525–
1695; fax: 703–528–2148; website:
www.safetyequipment.org.
Remove full paragraph citations for outlying
sections. Update contact information for the
National Safety Council.
1915.5(d)(8) ANSI Z87.1–1989 (R–1998), Practice for Occupational and Educational Eye
and Face Protection, Reaffirmation approved
January 4, 1999; IBR approved for
§ 1910.153(b). * * *
1915.5(d)(9) American National Standards Institute (ANSI) Z89.1–2009, American National
Standard for Industrial Head Protection, approved January 26, 2009; IBR approved for
§ 1915.155(b)(1)(i). Copies of ANSI Z89.1–
2009 are available for purchase only from the
International Safety Equipment Association,
1901 North Moore Street, Arlington, VA
22209–1762; telephone: 703–525–1695; fax:
703–528–2148; website:
www.safetyequipment.org.
1915.5(d)(10) American National Standards Institute (ANSI) Z89.1–2003, American National
Standard for Industrial Head Protection; IBR
approved for § 1915.155(b)(1)(ii). Copies of
ANSI Z89.1–2003 are available for purchase
only from the International Safety Equipment
Association, 1901 North Moore Street, Arlington, VA 22209–1762; telephone: 703–525–
1695; fax: 703–528–2148; website:
www.safetyequipment.org.
1915.5(d)(11) American National Standards Institute (ANSI) Z89.1–1997, American National
Standard for Personnel Protection—Protective Headwear for Industrial Workers—Requirements; IBR approved for
§ 1915.155(b)(1)(iii). Copies of ANSI Z89.1–
1997 are available for purchase only from the
International Safety Equipment Association,
1901 North Moore Street, Arlington, VA
22209–1762; telephone: 703–525–1695; fax:
703–528–2148; website:
www.safetyequipment.org.
VerDate Sep<11>2014
16:13 Oct 01, 2021
Jkt 256001
PO 00000
Frm 00026
Fmt 4700
Sfmt 4700
Remove full paragraph citations for outlying
sections. Update contact information for the
National Safety Council.
Update contact information for the IHS Standards Store.
Update contact information for the TechStreet
Store.
The 2016 revision (81 FR 16085, March 25,
2016) incorrectly changed this cross-reference from part 1915 to part 1910.
The 2016 revision (81 FR 16085, March 25,
2016) incorrectly changed this cross-reference from part 1915 to part 1910.
Remove full paragraph citations for outlying
sections. Update mailing address for the
International Safety Equipment Association.
Remove full paragraph citations for outlying
sections. Update mailing address for the
International Safety Equipment Association.
Remove full paragraph citations for outlying
sections. Update mailing address for the
International Safety Equipment Association.
E:\FR\FM\04OCR1.SGM
04OCR1
Federal Register / Vol. 86, No. 189 / Monday, October 4, 2021 / Rules and Regulations
54613
TABLE 1—SUMMARY OF REVISIONS—Continued
Current language
Corrected language
1915.5(e) The following material is available for
purchase from the American Society of Mechanical Engineers, 345 East 47th Street,
New York, New York 10017:
1915.5(e) American Society of Mechanical
Engineers (ASME), Two Park Avenue, New
York, New York 10016; telephone: (800)
843–2763; email: CustomerCare@
asme.org; website: https://www.asme.org/
codes-standards:
1915.5(f) American Conference of Governmental Industrial Hygienists (ACGIH), 3640
Park 42 Drive, Cincinnati, OH 45241; telephone: (513) 742–2020; website: https://
www.acgih.org/publications/:
1915.5(i) National Fire Protection Association,
1 Batterymarch Park, P.O. Box 9101, Quincy, MA 02269–9101; telephone: (800) 344–
3555; email: orders@nfpa.org; website:
https://www.nfpa.org/Codes-and-Standards:
1915.5(g) Copies of the standards listed in
this paragraph (g) are available for purchase from ASTM International, 100 Barr
Harbor Drive, P.O. Box C700, West
Conshohocken, PA 19428–2959; telephone:
610–832–9500; fax: 610–832–9555; email:
service@astm.org; website: www.astm.org:
1915.5(f) The following material is available for
purchase from the American Conference of
Governmental Industrial Hygienists (ACGIH),
1014 Broadway, Cincinnati, OH 45202:
1915.5(f)(1)(i) The following material is available for purchase from the National Fire Protection Association, 1 Batterymarch Park,
P.O. Box 9101, Quincy, MA 02269–9101:
1915.5(g) Copies of the standards listed in this
paragraph (g) are available for purchase from
ASTM International, 100 Barr Harbor Drive,
P.O. Box C700, West Conshohocken, PA
19428–2959; telephone: 610–832–9585; fax:
610–832–9555; e-mail: seviceastm.org;
website: https://www.astm.org:
II. Exemption From Notice-andComment Procedures
OSHA has determined that these
corrections are not subject to the
procedures for public notice and
comment specified in the
Administrative Procedures Act (5 U.S.C.
553), and Section 6(b) of the
Occupational Safety and Health Act of
1970 (29 U.S.C. 655(b)). This
rulemaking only corrects minor errors
and makes non-substantive codification
changes. No stakeholder is likely to
object to these corrections. Therefore,
the agency finds good cause that public
notice and comment are unnecessary
within the meaning of 5 U.S.C.
553(b)(3)(B), 29 U.S.C. 655(b), and 29
CFR 1911.5.
List of Subjects for 29 CFR Part 1915
Incorporation by reference.
Amendment to Standard [corrected]
For the reasons set forth above, 29
CFR part 1915 is amended as follows:
PART 1915—OCCUPATIONAL SAFETY
AND HEALTH STANDARDS FOR
SHIPYARD EMPLOYMENT
1. The authority citation for part 1915
continues to read as follows:
■
Authority: 33 U.S.C. 941; 29 U.S.C. 653,
655, 657; Secretary of Labor’s Order No. 12–
71 (36 FR 8754); 8–76 (41 FR 25059), 9–83
(48 FR 35736), 1–90 (55 FR 9033), 6–96 (62
FR 111), 3–2000 (65 FR 50017), 5–2002 (67
FR 65008), 5–2007 (72 FR 31160), 4–2010 (75
FR 55355), or 1–2012 (77 FR 3912); 29 CFR
part 1911; and 5 U.S.C. 553, as applicable.
2. Revise and republish § 1915.5 to
read as follows:
James S. Frederick, Acting Assistant
Secretary of Labor for Occupational
Safety and Health, U.S. Department of
Labor, 200 Constitution Avenue NW,
Washington, DC 20210, authorized the
preparation of this notice pursuant to
Sections 4, 6, and 8 of the Occupational
Safety and Health Act of 1970 (29 U.S.C.
653, 655, and 657); Secretary of Labor’s
Order 8–2020 (85 FR 58393 (Sept. 18,
2020)); 29 CFR part 1911; and 5 U.S.C.
553.
16:13 Oct 01, 2021
Signed at Washington, DC, on September
13, 2021.
James S. Frederick,
Acting Assistant Secretary of Labor for
Occupational Safety and Health.
■
Authority and Signature
VerDate Sep<11>2014
Explanation
Jkt 256001
§ 1915.5
Incorporation by reference.
(a) Specifications, standards, and
codes of agencies of the U.S.
Government, to the extent specified in
the text, form a part of the regulations
of this part. In addition, under the
authority vested in the Secretary under
the Act, the specifications, standards,
and codes of organizations which are
not agencies of the U.S. Government, in
effect on the date of the promulgation of
the regulations of this part as listed
below, to the extent specified in the
text, form a part of the regulations of
this part.
PO 00000
Frm 00027
Fmt 4700
Sfmt 4700
Update contact information for ASME.
Update contact information for ACGIH.
All of paragraph (i) is out of sequence following the publication of 84 FR 21416, May
14, 2019. Update the contact information
for NFPA.
The email address in paragraph (g) was published incorrectly in 74 FR 46350, Sept. 9,
2009. Update the telephone number for
ASTM International.
(b)(1) The standards listed in this
section are incorporated by reference
into this part with the approval of the
Director of the Federal Register in
accordance with 5 U.S.C. 552(a) and 1
CFR part 51. To enforce any edition
other than that specified in this section,
OSHA must publish a document in the
Federal Register and the material must
be available to the public.
(2) Any changes in the standards
incorporated by reference in this part
and an official historic file of such
changes are available for inspection in
the Docket Office at the national office
of the Occupational Safety and Health
Administration, U.S. Department of
Labor, Washington, DC 20210;
telephone: 202–693–2350 (TTY number:
877–889–5627).
(3) Copies of standards listed in this
section and issued by private standards
organizations are available for purchase
from the issuing organizations at the
addresses or through the other contact
information listed elsewhere in this
section for these private standards
organizations. In addition, the standards
are available for inspection at any
Regional Office of the Occupational
Safety and Health Administration
(OSHA), or at the OSHA Docket Office,
U.S. Department of Labor, 200
Constitution Avenue NW, Room N–
3508, Washington, DC 20210; telephone:
202–693–2350 (TTY number: 877–889–
5627). These standards are also
available for inspection at the National
Archives and Records Administration
(NARA). For information on the
availability of these standards at NARA,
E:\FR\FM\04OCR1.SGM
04OCR1
54614
Federal Register / Vol. 86, No. 189 / Monday, October 4, 2021 / Rules and Regulations
email fr.inspection@nara.gov, or go to
www.archives.gov/federal-register/cfr/
ibr-locations.html.
(c) [Reserved]
(d) American National Standards
Institute (ANSI), 25 West 43rd Street,
4th Floor, New York, NY 10036;
telephone: 212–642–4900; fax: 212–
398–0023; website: www.ansi.org://
(1) ANSI A14.1–1975 Safety
Requirements for Portable Wood
Ladders, IBR approved for § 1915.72(a).
(2) ANSI A14.2–1972 Safety
Requirements for Portable Metal
Ladders, IBR approved for § 1915.72(a).
(3) ANSI B7.1–1964 Safety Code for
the Use, Care, and Protection of
Abrasive Wheels, IBR approval for
§ 1915.134(c).
(4) ANSI Z41–1999, American
National Standard for Personal
Protection—Protective Footwear; IBR
approved for § 1915.156(b). Copies of
ANSI Z41–1999 are available for
purchase only from the National Safety
Council, 1121 Spring Lake Drive, Itasca,
IL 60143–3201; telephone: (800) 621–
7619; fax: 630–285–1434; website:
www.nsc.org.
(5) ANSI Z41–1991, American
National Standard for Personal
Protection—Protective Footwear; IBR
approved for § 1915.156(b). Copies of
ANSI Z41–1991 are available for
purchase only from the National Safety
Council, 1121 Spring Lake Drive, Itasca,
IL 60143–3201; telephone: (800) 621–
7619; fax: 630–285–1434; website:
www.nsc.org.
(6) ANSI/ISEA Z87.1–2010,
Occupational and Educational Personal
Eye and Face Protection Devices,
approved April 13, 2010; IBR approved
for § 1915.153(b). Copies are available
for purchase from:
(i) ANSI Webstore, 25 W 43rd Street,
4th Floor, New York, NY 10036;
telephone: (212) 642–4980; website:
https://webstore.ansi.org;
(ii) IHS Standards Store, 15 Inverness
Way East, Englewood, CO 80112;
telephone: (800) 447–2273; website:
https://global.ihs.com; or
(iii) TechStreet Store, 3025 Boardwalk
Drive, Suite 220, Ann Arbor, MI 48108;
telephone: (855) 999–9870; website:
www.techstreet.com.
(7) ANSI Z87.1–2003, Occupational
and Educational Personal Eye and Face
Protection Devices, approved June 19,
2003; IBR approved for § 1915.153(b).
Copies available for purchase from the:
(i) ANSI Webstore, 25 W 43rd Street,
4th Floor, New York, NY 10036;
telephone: (212) 642–4980; website:
https://webstore.ansi.org/;
(ii) IHS Standards Store, 15 Inverness
Way East, Englewood, CO 80112;
VerDate Sep<11>2014
16:13 Oct 01, 2021
Jkt 256001
telephone: (800) 447–2273; website:
https://global.ihs.com; or
(iii) TechStreet Store, 3025 Boardwalk
Drive, Suite 220, Ann Arbor, MI 48108;
telephone: (855) 999–9870; website:
www.techstreet.com.
(8) ANSI Z87.1–1989 (R–1998),
Practice for Occupational and
Educational Eye and Face Protection,
Reaffirmation approved January 4, 1999;
IBR approved for § 1915.153(b). Copies
are available for purchase from:
(i) ANSI Webstore, 25 W 43rd Street,
4th Floor, New York, NY 10036;
telephone: (212) 642–4980; website:
https://webstore.ansi.org/;
(ii) IHS Standards Store, 15 Inverness
Way East, Englewood, CO 80112;
telephone: (800) 447–2273; website:
https://global.ihs.com; or
(iii) TechStreet Store, 3025 Boardwalk
Drive, Suite 220, Ann Arbor, MI 48108;
telephone: (855) 999–9870; website:
www.techstreet.com.
(9) American National Standards
Institute (ANSI) Z89.1–2009, American
National Standard for Industrial Head
Protection, approved January 26, 2009;
IBR approved for § 1915.155(b). Copies
of ANSI Z89.1–2009 are available for
purchase only from the International
Safety Equipment Association, 1101
Wilson Boulevard, Suite 1425,
Arlington, VA 22209–1762; telephone:
703–525–1695; fax: 703–528–2148;
website: www.safetyequipment.org.
(10) American National Standards
Institute (ANSI) Z89.1–2003, American
National Standard for Industrial Head
Protection; IBR approved for
§ 1915.155(b). Copies of ANSI Z89.1–
2003 are available for purchase only
from the International Safety Equipment
Association, 1101 Wilson Boulevard,
Suite 1425, Arlington, VA 22209–1762;
telephone: 703–525–1695; fax: 703–
528–2148; website:
www.safetyequipment.org.
(11) American National Standards
Institute (ANSI) Z89.1–1997, American
National Standard for Personnel
Protection—Protective Headwear for
Industrial Workers—Requirements; IBR
approved for § 1915.155(b). Copies of
ANSI Z89.1–1997 are available for
purchase only from the International
Safety Equipment Association, 1101
Wilson Boulevard, Suite 1425,
Arlington, VA 22209–1762; telephone:
703–525–1695; fax: 703–528–2148;
website: www.safetyequipment.org.
(12) ANSI/IESNA RP–7–01,
Recommended Practice for Lighting
Industrial Facilities, ANSI approved
July 26, 2001, IBR approved for
§ 1915.82(a).
(13) ANSI/ISEA Z308.1–2009,
Revision of ANSI Z308.1–2003,
Minimum Requirements for Workplace
PO 00000
Frm 00028
Fmt 4700
Sfmt 4700
First Aid Kits and Supplies, ANSI
approved May 8, 2009, IBR approved for
§ 1915.87 Appendix A.
Note 1 to paragraph (d): Unless otherwise
indicated, all standards in this paragraph (d)
are available from ANSI.
(e) American Society of Mechanical
Engineers (ASME), Two Park Avenue,
New York, New York 10016; telephone:
(800) 843–2763; email: CustomerCare@
asme.org; website: https://
www.asme.org/codes-standards:
(1) ASME Boiler and Pressure Vessel
Code, Section VIII, Rules for
Construction of Unfired Pressure
Vessels, 1963, IBR approved for
§ 1915.172(a).
(2) [Reserved]
(f) American Conference of
Governmental Industrial Hygienists
(ACGIH), 3640 Park 42 Drive,
Cincinnati, OH 45241; telephone: (513)
742–2020; website: https://
www.acgih.org/publications/:
(1) Threshold limit values, 1970, IBR
approved for §§ 1915.12(b) and
1915.1000, table Z.
(2) [Reserved]
(g) ASTM International, 100 Barr
Harbor Drive, P.O. Box C700, West
Conshohocken, PA 19428–2959;
telephone: 610–832–9500; fax: 610–
832–9555; email: service@astm.org;
website: www.astm.org:
(1) ASTM F–2412–2005, Standard
Test Methods for Foot Protection; IBR
approved for § 1915.156(b).
(2) ASTM F–2413–2005, Standard
Specification for Performance
Requirements for Protective Footwear;
IBR approved for § 1915.156(b).
(h) International Labour Organization
(ILO), 4 route des Morillons, CH–1211
Gene`ve 22, Switzerland; telephone: +41
(0) 22 799 6111; fax: +41 (0) 22 798
8685; website: www.ilo.org/.
(1) Guidelines for the Use of the ILO
International Classification of
Radiographs of Pneumoconioses,
Revised Edition 2011, Occupational
safety and health series; 22 (Rev. 2011),
IBR approved for § 1915.1001.
(2) [Reserved]
(i) National Fire Protection
Association (NFPA), 1 Batterymarch
Park, P.O. Box 9101, Quincy, MA
02269–9101; telephone: (800) 344–3555;
email: orders@nfpa.org; website: https://
www.nfpa.org/Codes-and-Standards:
(1) NFPA 1981–2002 Standard on
Open-Circuit Self-Contained Breathing
Apparatus for Fire and Emergency
Services, IBR approved for 1915.505(e).
(2) NFPA 1971–2000, Standard on
Protective Ensemble for Structural Fire
Fighting, IBR approved for
§ 1915.505(e).
(3) NFPA 1976–2000, Standard on
Protective Ensemble for Proximity Fire
E:\FR\FM\04OCR1.SGM
04OCR1
Federal Register / Vol. 86, No. 189 / Monday, October 4, 2021 / Rules and Regulations
Fighting, IBR approved for
§ 1915.505(e).
(4) NFPA 1982–1998, Standard on
Personal Alert Safety Systems (PASS),
IBR approved for § 1915.505(e).
(5) NFPA 1983–2001, Standard on
Fire Service Life Safety Rope and
System Components, IBR approved for
§ 1915.505(e).
(6) NFPA 10–2002 Standard for
Portable Fire Extinguishers, IBR
approved for § 1915.507(b).
(7) NFPA 14–2003 Standard for the
Installation of Standpipe and Hose
Systems, IBR approved for
§§ 1915.507(b) and (d).
(8) NFPA 72–2002 National Fire
Alarm Code, IBR approved for
§ 1915.507(c).
(9) NFPA 13–2002 Standard for the
Installation of Sprinkler Systems, IBR
approved for § 1915.507(d).
(10) NFPA 750–2003 Standard on
Water Mist Fire Protection Systems, IBR
approved for § 1915.507(d).
(11) NFPA 25–2002, Inspection,
Testing, and Maintenance of WaterBased Fire Protection Systems, IBR
approved for § 1915.507(d).
(12) NFPA 15–2001, Standard for
Water Spray Fixed Systems for Fire
Protection, IBR approved for
§ 1915.507(d).
(13) NFPA 11–2005 Standard for
Low-, Medium-, and High-Expansion
Foam, IBR approved for § 1915.507(d).
(14) NFPA 17–2002, Standard for Dry
Chemical Extinguishing Systems, IBR
approved for § 1915.507(d).
(15) NFPA 12–2005, Standard on
Carbon Dioxide Extinguishing Systems,
IBR approved for § 1915.507(d).
(16) NFPA 12A–2004, Standard on
Halon 1301 Fire Extinguishing Systems,
IBR approved for § 1915.507(d).
(17) NFPA 2001–2004, Standard on
Clean Agent Fire Extinguishing
Systems, IBR approved for
§ 1915.507(d).
(18) NFPA 1403–2002, Standard on
Live Fire Training Evolutions, IBR
approved for § 1915.508(d).
[FR Doc. 2021–20099 Filed 10–1–21; 8:45 am]
BILLING CODE 4510–26–P
DEPARTMENT OF DEFENSE
Department of the Army
32 CFR Part 507
[Docket ID: USA–2018–HQ–0016]
RIN 0702–AA70
Manufacture, Sale, Wear, and Quality
Control of Heraldic Items
Department of the Army,
Department of Defense (DoD).
AGENCY:
VerDate Sep<11>2014
18:15 Oct 01, 2021
Jkt 256001
ACTION:
Final rule.
The Department of the Army
is finalizing its regulation describing the
Army Heraldic Quality Control Program
and the certification process for
manufacturers in order to make Military
Insignia. The rule establishes
procedures governing the manufacture,
commercial sale, reproduction,
possession, and wear of military
decorations, medals, badges, insignia
and their components and
appurtenances also discussed is the
five-year renewal period for
manufacturer certification and insignia
authorizations and the procedure for
authorizing the use of insignia on
commercial items.
DATES: This rule is effective on
November 3, 2021.
FOR FURTHER INFORMATION CONTACT:
Charles V. Mugno, Office of the
Administrative Assistant to the
Secretary of the Army, Director of the
Institute of Heraldry, (571) 515–0320.
SUPPLEMENTARY INFORMATION:
SUMMARY:
I. Background
a. This final rule revises the
Department of the Army’s (DA)
regulation, 32 Code of Federal
Regulations (CFR) part 507, for
implementing the Army Heraldic
Quality Control Program which was last
published on May 18, 1998 (63 FR
27208). The revisions being finalized
include a procedural change to
manufacturer certification and insignia
authorizations which add a five-year
renewal period for manufacturer
certification and insignia authorizations.
This change insures the manufacturing
base is current and insignia is
periodically examined for quality. The
second change is to the approving
authority for the use of insignia images
in commercial items. Pursuant to Title
10 U.S.C. 2260, Licensing of intellectual
property: Retention of fees, the
Secretary of the Army established the
Army Trademark Licensing Program in
2006, formalizing the process for the
licensing of marks owned by the
Department of the Army, including
heraldic insignia and other collective
marks.
The authorities for this rule are 10
U.S.C. 7594; 15 U.S.C. 1051 et seq.; 10
U.S.C. 2260; 18 U.S.C. 701, 704; 36
U.S.C. 901. Title 10 U.S.C. 7594 grants
the Secretary of the Army the authority
to design flags, insignia, badges, medals,
seals, decorations, guidons, streamers,
finial pieces for flagstaffs, buttons,
buckles, awards, trophies, marks,
emblems, rosettes, scrolls, braids,
ribbons, knots, tabs, cords and similar
PO 00000
Frm 00029
Fmt 4700
Sfmt 4700
54615
items for other military departments and
to advise other Federal departments and
agencies on matters of heraldry. Title 15
U.S.C. 1051 et seq. is the statutory basis
for the ownership and control of
trademarks, service marks, certification
marks, and collective marks. Title 10
U.S.C. 2260 grants the Secretary of the
Army the authority to license
trademarks, service marks, certification
marks, and collective marks owned or
controlled by the Secretary of the Army.
Title 18 U.S.C. 701 states
manufacturing, selling and possession
of any badge, identification card or
insignia prescribed by the head of any
department or agency of the United
States is unlawful unless authorized by
regulations made pursuant to law. Title
18 U.S.C. 704, also known as the
‘‘Stolen Valor Act’’ makes it illegal for
a person to fraudulently claim having
received a valor award specified in the
Act, with the intention of obtaining
money, property, or other tangible
benefit by convincing another that he or
she received the award. Title 36 U.S.C.
901 grants authority to the Secretary of
Defense to approve a service flag and
lapel button for display by members of
the immediate family of an individual
serving in the Armed Forces of the
United States during any period of war
or hostilities in which the armed forces
are engaged. Persons must apply to the
Secretary of Defense for a license to
manufacture and sell the approved
service flag. That authority was
delegated in DoD Manual 1348.33 to the
Secretary of the Army. (Available at
https://www.esd.whs.mil/Directives/
issuances/dodm/.)
II. Summary of Major Provisions
Subpart A—Introduction. Includes
discussion on purpose and
applicability; references; provides a list
of definitions, terms, and abbreviations;
responsibly; outlines the responsibilities
for the implementation of the program;
statutory authority; identifies and
defines the applicable statutes.
Subpart B—Manufacture and Sale of
Decorations, Badges, and Insignia
includes discussion on the process to
become a certified manufacturer;
provides requirements for the
certification of insignia; discusses
process to incorporate designs in
commercial articles; discusses the
possession and wear of decoration,
service medal, badge, service ribbon,
lapel button, or insignia.
Subpart C—Heraldic Quality Control
Program discusses the program and the
controlled heraldic items that fall under
the program and identified insignia that
are not authorized for commercial sale.
This subpart also discusses penalties for
E:\FR\FM\04OCR1.SGM
04OCR1
]]>Agencies
[Federal Register Volume 86, Number 189 (Monday, October 4, 2021)]
[Rules and Regulations]
[Pages 54611-54615]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-20099]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
29 CFR Part 1915
Incorporation by Reference; Notice of Corrections
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Final rule; correcting amendments.
-----------------------------------------------------------------------
SUMMARY: OSHA is making minor corrections to the Incorporation by
Reference (IBR) section for Maritime due to inadvertent mistakes in
three final rules: Updating OSHA Standards Based on National Consensus
Standards, Personal Protective Equipment; Updating OSHA Standards Based
on National Consensus Standards, Eye and Face Protection; and Standards
Improvement Project-Phase IV. The notice also updates contact
information for a government agency and consensus organizations in the
Incorporation by Reference section and adjusts the codification to meet
Office of the Federal Register requirements.
DATES: Effective October 4, 2021.
FOR FURTHER INFORMATION CONTACT:
Press inquiries: Frank Meilinger, Director, OSHA Office of
Communications; telephone: (202) 693-1999; email:
[email protected].
General and technical information: Amy Wangdahl, Director, Office
of Maritime and Agriculture, OSHA Directorate of Standards and
Guidance; telephone: (202) 693-2066; email: [email protected].
SUPPLEMENTARY INFORMATION:
I. Summary and Explanation
OSHA published three final rules containing inadvertent errors in
the Incorporation by Reference section for Maritime, Sec. 1915.5. The
final rules were Updating OSHA Standards Based on National Consensus
Standards, Personal Protective Equipment, published September 9, 2009
(74 FR 46350); Updating OSHA Standards Based on National Consensus
Standards, Eye and Face Protection, published March 25, 2016 (81 FR
16085); and Standards Improvement Project-Phase IV, published May 14,
2019 (84 FR 21416). The agency is submitting this document to correct
errors in these three final rules that included numerical and
typographical errors, as well as move paragraph Sec. 1915.5 (c) to
paragraph (b)(3), so that all incorporation by reference (IBR) approval
and contact language is contained in one paragraph (see 1 CFR part 51
and the Office of the Federal Register's (OFR's) IBR Handbook). In
addition, this document updates the contact information for the
National Archives and Records Administration (NARA) in former Sec.
1915.5(c), National Safety Council in Sec. 1915.5(d)(4) and (5), IHS
Standards Store in Sec. 1915.5(d)(6)(ii), (7)(ii) and (8)(ii),
TechStreet Store in Sec. 1915.5(d)(6)(iii), (7)(iii) and (8)(iii),
International Safety Equipment Association (ISEA) in Sec. 1915.5(d)(9)
to (11), and American Society of Mechanical Engineers (ASME) in Sec.
1915.5(e), American Conference of Governmental Industrial Hygienists
(ACGIH) in Sec. 1915.5(f), National Fire Protection Association (NFPA)
in former Sec. 1915.5(f)(1)(i), and ASTM International in Sec.
1915.5(g). Paragraphs Sec. 1915.5 (d)(7) and (d)(8) incorrectly cross-
referenced part 1910 instead of part 1915. All of paragraph (f)(1)(i)
was out of sequence and renumbered as paragraph (i). Table 1 summarizes
the errors, omission, and updates by paragraph for Sec. 1915.5.
Additional revisions to meet Office of the Federal Register
requirements, such as the removal of full paragraph citations for
outlying sections, are included in the revision and republishing of
Sec. 1915.5.
Table 1--Summary of Revisions
----------------------------------------------------------------------------------------------------------------
Current language Corrected language Explanation
----------------------------------------------------------------------------------------------------------------
1915.5(b)(3)--Currently paragraph 1915.5(b)(3) Copies of standards Paragraph (c), which contains
(c) Copies of standards listed in listed in this section and issued availability and contact
this section and issued by private by private standards organizations information for OSHA, is
standards organizations are are available for purchase from the redesignated paragraph (b)(3), so
available for purchase from the issuing organizations at the that all required approval and
issuing organizations at the addresses or through the other availability language is in a
addresses or through the other contact information listed single paragraph, following OFR's
contact information listed below elsewhere in this section for these IBR requirements. Update contact
for these private standards private standards organizations. In information for the NARA IBR.
organizations. In addition, the addition, the standards are
standards are available for available for inspection at any
inspection at any Regional Office Regional Office of the Occupational
of the Occupational Safety and Safety and Health Administration
Health Administration (OSHA), or at (OSHA), or at the OSHA Docket
the OSHA Docket Office, U.S. Office, U.S. Department of Labor,
Department of Labor, 200 200 Constitution Avenue NW, Room N-
Constitution Avenue NW, Room N- 3508, Washington, DC 20210;
3508, Washington, DC 20210; telephone: 202-693-2350 (TTY
telephone: 202-693-2350 (TTY number: 877-889-5627). These
number: 877-889-5627). These standards are also available for
standards are also available for inspection at the National Archives
inspection at the National Archives and Records Administration (NARA).
and Records Administration (NARA). For information on the availability
For information on the availability of these standards at NARA, email
of these standards at NARA, [email protected], or go to
telephone: 202-741-6030, or go to www.archives.gov/federal-register/
www.archives.gov/federalregister/cfr/ibr-locations.html.
cfr/ibr-locations.html.
[[Page 54612]]
1915.5(d)(4) ANSI Z41-1999, American 1915.5(d)(4) ANSI Z41-1999, American Remove full paragraph citations for
National Standard for Personal National Standard for Personal outlying sections. Update contact
Protection-Protective Footwear; IBR Protection--Protective Footwear; information for the National Safety
approved for Sec. IBR approved for Sec. Council.
1915.156(b)(1)(ii). Copies of ANSI 1915.156(b). Copies of ANSI Z41-
Z41-1999 are available for purchase 1999 are available for purchase
only from the National Safety only from the National Safety
Council, P.O. Box 558, Itasca, IL Council, 1121 Spring Lake Drive,
60143-0558; telephone: 1-800-621- Itasca, IL 60143-3201; telephone:
7619; fax: 708-285-0797; website: (800) 621-7619; fax: 630-285-1434;
https://www.nsc.org. website: www.nsc.org.
1915.5(d)(5) ANSI Z41-1991, American 1915.5(d)(5) ANSI Z41-1991, American Remove full paragraph citations for
National Standard for Personal National Standard for Personal outlying sections. Update contact
Protection-Protective Footwear; IBR Protection--Protective Footwear; information for the National Safety
approved for Sec. IBR approved for Sec. Council.
1915.156(b)(1)(iii). Copies of ANSI 1915.156(b). Copies of ANSI Z41-
Z41-1991 are available for purchase 1991 are available for purchase
only from the National Safety only from the National Safety
Council, P.O. Box 558, Itasca, IL Council, 1121 Spring Lake Drive,
60143-0558; telephone: 1-800-621- Itasca, IL 60143-3201; telephone:
7619; fax: 708-285-0797; website: (800) 621-7619; fax: 630-285-1434;
https://www.nsc.org. website: www.nsc.org.
1915.5(d)(6)(ii), (7)(ii), and 1915.5(d)(6)(ii), (7)(ii), and Update contact information for the
(8)(ii) IHS Standards Store, 15 (8)(ii) IHS Standards Store, 15 IHS Standards Store.
Inverness Way East, Englewood, CO Inverness Way East, Englewood, CO
80112; telephone: (877) 413-5184; 80112; telephone: (800) 447-2273;
website: https://global.ihs.com; or website: https://global.ihs.com; or
1915.5(d)(6)(iii), (7)(iii), and 1915.5(d)(6)(iii), (7)(iii), and Update contact information for the
(8)(iii) TechStreet Store, 3916 (8)(iii) TechStreet Store, 3025 TechStreet Store.
Ranchero Dr., Ann Arbor, MI 48108; Boardwalk Drive, Suite 220, Ann
telephone: (877) 699-9277; website: Arbor, MI 48108; telephone: (855)
https://techstreet.com. 999-9870; website:
www.techstreet.com.
1915.5(d)(7) ANSI Z87.1-2003, 1915.5(d)(7) ANSI Z87.1-2003, The 2016 revision (81 FR 16085,
Occupational and Educational Occupational and Educational March 25, 2016) incorrectly changed
Personal Eye and Face Protection Personal Eye and Face Protection this cross-reference from part 1915
Devices, approved June 19, 2003; Devices, approved June 19, 2003; to part 1910.
IBR approved for Sec. IBR approved for Sec.
1910.153(b). * * * 1915.153(b). * * *
1915.5(d)(8) ANSI Z87.1-1989 (R- 1915.5(d)(8) ANSI Z87.1-1989 (R- The 2016 revision (81 FR 16085,
1998), Practice for Occupational 1998), Practice for Occupational March 25, 2016) incorrectly changed
and Educational Eye and Face and Educational Eye and Face this cross-reference from part 1915
Protection, Reaffirmation approved Protection, Reaffirmation approved to part 1910.
January 4, 1999; IBR approved for January 4, 1999; IBR approved for
Sec. 1910.153(b). * * * Sec. 1915.153(b). * * *
1915.5(d)(9) American National 1915.5(d)(9) American National Remove full paragraph citations for
Standards Institute (ANSI) Z89.1- Standards Institute (ANSI) Z89.1- outlying sections. Update mailing
2009, American National Standard 2009, American National Standard address for the International
for Industrial Head Protection, for Industrial Head Protection, Safety Equipment Association.
approved January 26, 2009; IBR approved January 26, 2009; IBR
approved for Sec. approved for Sec. 1915.155(b).
1915.155(b)(1)(i). Copies of ANSI Copies of ANSI Z89.1-2009 are
Z89.1-2009 are available for available for purchase only from
purchase only from the the International Safety Equipment
International Safety Equipment Association, 1101 Wilson Boulevard,
Association, 1901 North Moore Suite 1425, Arlington, VA 22209-
Street, Arlington, VA 22209-1762; 1762; telephone: 703-525-1695; fax:
telephone: 703-525-1695; fax: 703- 703-528-2148; website:
528-2148; website: www.safetyequipment.org.
www.safetyequipment.org.
1915.5(d)(10) American National 1915.5(d)(10) American National Remove full paragraph citations for
Standards Institute (ANSI) Z89.1- Standards Institute (ANSI) Z89.1- outlying sections. Update mailing
2003, American National Standard 2003, American National Standard address for the International
for Industrial Head Protection; IBR for Industrial Head Protection; IBR Safety Equipment Association.
approved for Sec. approved for Sec. 1915.155(b).
1915.155(b)(1)(ii). Copies of ANSI Copies of ANSI Z89.1-2003 are
Z89.1-2003 are available for available for purchase only from
purchase only from the the International Safety Equipment
International Safety Equipment Association, 1101 Wilson Boulevard,
Association, 1901 North Moore Suite 1425, Arlington, VA 22209-
Street, Arlington, VA 22209-1762; 1762; telephone: 703-525-1695; fax:
telephone: 703-525-1695; fax: 703- 703-528-2148; website:
528-2148; website: www.safetyequipment.org.
www.safetyequipment.org.
1915.5(d)(11) American National 1915.5(d)(11) American National Remove full paragraph citations for
Standards Institute (ANSI) Z89.1- Standards Institute (ANSI) Z89.1- outlying sections. Update mailing
1997, American National Standard 1997, American National Standard address for the International
for Personnel Protection-- for Personnel Protection-- Safety Equipment Association.
Protective Headwear for Industrial Protective Headwear for Industrial
Workers--Requirements; IBR approved Workers--Requirements; IBR approved
for Sec. 1915.155(b)(1)(iii). for Sec. 1915.155(b). Copies of
Copies of ANSI Z89.1-1997 are ANSI Z89.1-1997 are available for
available for purchase only from purchase only from the
the International Safety Equipment International Safety Equipment
Association, 1901 North Moore Association, 1101 Wilson Boulevard,
Street, Arlington, VA 22209-1762; Suite 1425, Arlington, VA 22209-
telephone: 703-525-1695; fax: 703- 1762; telephone: 703-525-1695; fax:
528-2148; website: 703-528-2148; website:
www.safetyequipment.org. www.safetyequipment.org.
[[Page 54613]]
1915.5(e) The following material is 1915.5(e) American Society of Update contact information for ASME.
available for purchase from the Mechanical Engineers (ASME), Two
American Society of Mechanical Park Avenue, New York, New York
Engineers, 345 East 47th Street, 10016; telephone: (800) 843-2763;
New York, New York 10017: email: [email protected];
website: https://www.asme.org/codes-standards: standards:
1915.5(f) The following material is 1915.5(f) American Conference of Update contact information for
available for purchase from the Governmental Industrial Hygienists ACGIH.
American Conference of Governmental (ACGIH), 3640 Park 42 Drive,
Industrial Hygienists (ACGIH), 1014 Cincinnati, OH 45241; telephone:
Broadway, Cincinnati, OH 45202: (513) 742-2020; website: https://www.acgih.org/publications/:
1915.5(f)(1)(i) The following 1915.5(i) National Fire Protection All of paragraph (i) is out of
material is available for purchase Association, 1 Batterymarch Park, sequence following the publication
from the National Fire Protection P.O. Box 9101, Quincy, MA 02269- of 84 FR 21416, May 14, 2019.
Association, 1 Batterymarch Park, 9101; telephone: (800) 344-3555; Update the contact information for
P.O. Box 9101, Quincy, MA 02269- email: [email protected]; website: NFPA.
9101: https://www.nfpa.org/Codes-and-Standards: Standards:
1915.5(g) Copies of the standards 1915.5(g) Copies of the standards The email address in paragraph (g)
listed in this paragraph (g) are listed in this paragraph (g) are was published incorrectly in 74 FR
available for purchase from ASTM available for purchase from ASTM 46350, Sept. 9, 2009. Update the
International, 100 Barr Harbor International, 100 Barr Harbor telephone number for ASTM
Drive, P.O. Box C700, West Drive, P.O. Box C700, West International.
Conshohocken, PA 19428-2959; Conshohocken, PA 19428-2959;
telephone: 610-832-9585; fax: 610- telephone: 610-832-9500; fax: 610-
832-9555; e-mail: seviceastm.org; 832-9555; email: [email protected];
website: https://www.astm.org: website: www.astm.org:
----------------------------------------------------------------------------------------------------------------
II. Exemption From Notice-and-Comment Procedures
OSHA has determined that these corrections are not subject to the
procedures for public notice and comment specified in the
Administrative Procedures Act (5 U.S.C. 553), and Section 6(b) of the
Occupational Safety and Health Act of 1970 (29 U.S.C. 655(b)). This
rulemaking only corrects minor errors and makes non-substantive
codification changes. No stakeholder is likely to object to these
corrections. Therefore, the agency finds good cause that public notice
and comment are unnecessary within the meaning of 5 U.S.C.
553(b)(3)(B), 29 U.S.C. 655(b), and 29 CFR 1911.5.
List of Subjects for 29 CFR Part 1915
Incorporation by reference.
Authority and Signature
James S. Frederick, Acting Assistant Secretary of Labor for
Occupational Safety and Health, U.S. Department of Labor, 200
Constitution Avenue NW, Washington, DC 20210, authorized the
preparation of this notice pursuant to Sections 4, 6, and 8 of the
Occupational Safety and Health Act of 1970 (29 U.S.C. 653, 655, and
657); Secretary of Labor's Order 8-2020 (85 FR 58393 (Sept. 18, 2020));
29 CFR part 1911; and 5 U.S.C. 553.
Signed at Washington, DC, on September 13, 2021.
James S. Frederick,
Acting Assistant Secretary of Labor for Occupational Safety and Health.
Amendment to Standard [corrected]
For the reasons set forth above, 29 CFR part 1915 is amended as
follows:
PART 1915--OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD
EMPLOYMENT
0
1. The authority citation for part 1915 continues to read as follows:
Authority: 33 U.S.C. 941; 29 U.S.C. 653, 655, 657; Secretary of
Labor's Order No. 12-71 (36 FR 8754); 8-76 (41 FR 25059), 9-83 (48
FR 35736), 1-90 (55 FR 9033), 6-96 (62 FR 111), 3-2000 (65 FR
50017), 5-2002 (67 FR 65008), 5-2007 (72 FR 31160), 4-2010 (75 FR
55355), or 1-2012 (77 FR 3912); 29 CFR part 1911; and 5 U.S.C. 553,
as applicable.
0
2. Revise and republish Sec. 1915.5 to read as follows:
Sec. 1915.5 Incorporation by reference.
(a) Specifications, standards, and codes of agencies of the U.S.
Government, to the extent specified in the text, form a part of the
regulations of this part. In addition, under the authority vested in
the Secretary under the Act, the specifications, standards, and codes
of organizations which are not agencies of the U.S. Government, in
effect on the date of the promulgation of the regulations of this part
as listed below, to the extent specified in the text, form a part of
the regulations of this part.
(b)(1) The standards listed in this section are incorporated by
reference into this part with the approval of the Director of the
Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51.
To enforce any edition other than that specified in this section, OSHA
must publish a document in the Federal Register and the material must
be available to the public.
(2) Any changes in the standards incorporated by reference in this
part and an official historic file of such changes are available for
inspection in the Docket Office at the national office of the
Occupational Safety and Health Administration, U.S. Department of
Labor, Washington, DC 20210; telephone: 202-693-2350 (TTY number: 877-
889-5627).
(3) Copies of standards listed in this section and issued by
private standards organizations are available for purchase from the
issuing organizations at the addresses or through the other contact
information listed elsewhere in this section for these private
standards organizations. In addition, the standards are available for
inspection at any Regional Office of the Occupational Safety and Health
Administration (OSHA), or at the OSHA Docket Office, U.S. Department of
Labor, 200 Constitution Avenue NW, Room N-3508, Washington, DC 20210;
telephone: 202-693-2350 (TTY number: 877-889-5627). These standards are
also available for inspection at the National Archives and Records
Administration (NARA). For information on the availability of these
standards at NARA,
[[Page 54614]]
email [email protected], or go to www.archives.gov/federal-register/cfr/ibr-locations.html.
(c) [Reserved]
(d) American National Standards Institute (ANSI), 25 West 43rd
Street, 4th Floor, New York, NY 10036; telephone: 212-642-4900; fax:
212-398-0023; website: www.ansi.org://
(1) ANSI A14.1-1975 Safety Requirements for Portable Wood Ladders,
IBR approved for Sec. 1915.72(a).
(2) ANSI A14.2-1972 Safety Requirements for Portable Metal Ladders,
IBR approved for Sec. 1915.72(a).
(3) ANSI B7.1-1964 Safety Code for the Use, Care, and Protection of
Abrasive Wheels, IBR approval for Sec. 1915.134(c).
(4) ANSI Z41-1999, American National Standard for Personal
Protection--Protective Footwear; IBR approved for Sec. 1915.156(b).
Copies of ANSI Z41-1999 are available for purchase only from the
National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201;
telephone: (800) 621-7619; fax: 630-285-1434; website: www.nsc.org.
(5) ANSI Z41-1991, American National Standard for Personal
Protection--Protective Footwear; IBR approved for Sec. 1915.156(b).
Copies of ANSI Z41-1991 are available for purchase only from the
National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201;
telephone: (800) 621-7619; fax: 630-285-1434; website: www.nsc.org.
(6) ANSI/ISEA Z87.1-2010, Occupational and Educational Personal Eye
and Face Protection Devices, approved April 13, 2010; IBR approved for
Sec. 1915.153(b). Copies are available for purchase from:
(i) ANSI Webstore, 25 W 43rd Street, 4th Floor, New York, NY 10036;
telephone: (212) 642-4980; website: https://webstore.ansi.org;
(ii) IHS Standards Store, 15 Inverness Way East, Englewood, CO
80112; telephone: (800) 447-2273; website: https://global.ihs.com; or
(iii) TechStreet Store, 3025 Boardwalk Drive, Suite 220, Ann Arbor,
MI 48108; telephone: (855) 999-9870; website: www.techstreet.com.
(7) ANSI Z87.1-2003, Occupational and Educational Personal Eye and
Face Protection Devices, approved June 19, 2003; IBR approved for Sec.
1915.153(b). Copies available for purchase from the:
(i) ANSI Webstore, 25 W 43rd Street, 4th Floor, New York, NY 10036;
telephone: (212) 642-4980; website: https://webstore.ansi.org/;
(ii) IHS Standards Store, 15 Inverness Way East, Englewood, CO
80112; telephone: (800) 447-2273; website: https://global.ihs.com; or
(iii) TechStreet Store, 3025 Boardwalk Drive, Suite 220, Ann Arbor,
MI 48108; telephone: (855) 999-9870; website: www.techstreet.com.
(8) ANSI Z87.1-1989 (R-1998), Practice for Occupational and
Educational Eye and Face Protection, Reaffirmation approved January 4,
1999; IBR approved for Sec. 1915.153(b). Copies are available for
purchase from:
(i) ANSI Webstore, 25 W 43rd Street, 4th Floor, New York, NY 10036;
telephone: (212) 642-4980; website: https://webstore.ansi.org/;
(ii) IHS Standards Store, 15 Inverness Way East, Englewood, CO
80112; telephone: (800) 447-2273; website: https://global.ihs.com; or
(iii) TechStreet Store, 3025 Boardwalk Drive, Suite 220, Ann Arbor,
MI 48108; telephone: (855) 999-9870; website: www.techstreet.com.
(9) American National Standards Institute (ANSI) Z89.1-2009,
American National Standard for Industrial Head Protection, approved
January 26, 2009; IBR approved for Sec. 1915.155(b). Copies of ANSI
Z89.1-2009 are available for purchase only from the International
Safety Equipment Association, 1101 Wilson Boulevard, Suite 1425,
Arlington, VA 22209-1762; telephone: 703-525-1695; fax: 703-528-2148;
website: www.safetyequipment.org.
(10) American National Standards Institute (ANSI) Z89.1-2003,
American National Standard for Industrial Head Protection; IBR approved
for Sec. 1915.155(b). Copies of ANSI Z89.1-2003 are available for
purchase only from the International Safety Equipment Association, 1101
Wilson Boulevard, Suite 1425, Arlington, VA 22209-1762; telephone: 703-
525-1695; fax: 703-528-2148; website: www.safetyequipment.org.
(11) American National Standards Institute (ANSI) Z89.1-1997,
American National Standard for Personnel Protection--Protective
Headwear for Industrial Workers--Requirements; IBR approved for Sec.
1915.155(b). Copies of ANSI Z89.1-1997 are available for purchase only
from the International Safety Equipment Association, 1101 Wilson
Boulevard, Suite 1425, Arlington, VA 22209-1762; telephone: 703-525-
1695; fax: 703-528-2148; website: www.safetyequipment.org.
(12) ANSI/IESNA RP-7-01, Recommended Practice for Lighting
Industrial Facilities, ANSI approved July 26, 2001, IBR approved for
Sec. 1915.82(a).
(13) ANSI/ISEA Z308.1-2009, Revision of ANSI Z308.1-2003, Minimum
Requirements for Workplace First Aid Kits and Supplies, ANSI approved
May 8, 2009, IBR approved for Sec. 1915.87 Appendix A.
Note 1 to paragraph (d): Unless otherwise indicated, all
standards in this paragraph (d) are available from ANSI.
(e) American Society of Mechanical Engineers (ASME), Two Park
Avenue, New York, New York 10016; telephone: (800) 843-2763; email:
[email protected]; website: https://www.asme.org/codes-standards:
(1) ASME Boiler and Pressure Vessel Code, Section VIII, Rules for
Construction of Unfired Pressure Vessels, 1963, IBR approved for Sec.
1915.172(a).
(2) [Reserved]
(f) American Conference of Governmental Industrial Hygienists
(ACGIH), 3640 Park 42 Drive, Cincinnati, OH 45241; telephone: (513)
742-2020; website: https://www.acgih.org/publications/:
(1) Threshold limit values, 1970, IBR approved for Sec. Sec.
1915.12(b) and 1915.1000, table Z.
(2) [Reserved]
(g) ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West
Conshohocken, PA 19428-2959; telephone: 610-832-9500; fax: 610-832-
9555; email: [email protected]; website: www.astm.org:
(1) ASTM F-2412-2005, Standard Test Methods for Foot Protection;
IBR approved for Sec. 1915.156(b).
(2) ASTM F-2413-2005, Standard Specification for Performance
Requirements for Protective Footwear; IBR approved for Sec.
1915.156(b).
(h) International Labour Organization (ILO), 4 route des Morillons,
CH-1211 Gen[egrave]ve 22, Switzerland; telephone: +41 (0) 22 799 6111;
fax: +41 (0) 22 798 8685; website: www.ilo.org/.
(1) Guidelines for the Use of the ILO International Classification
of Radiographs of Pneumoconioses, Revised Edition 2011, Occupational
safety and health series; 22 (Rev. 2011), IBR approved for Sec.
1915.1001.
(2) [Reserved]
(i) National Fire Protection Association (NFPA), 1 Batterymarch
Park, P.O. Box 9101, Quincy, MA 02269-9101; telephone: (800) 344-3555;
email: [email protected]; website: https://www.nfpa.org/Codes-and-Standards:
(1) NFPA 1981-2002 Standard on Open-Circuit Self-Contained
Breathing Apparatus for Fire and Emergency Services, IBR approved for
1915.505(e).
(2) NFPA 1971-2000, Standard on Protective Ensemble for Structural
Fire Fighting, IBR approved for Sec. 1915.505(e).
(3) NFPA 1976-2000, Standard on Protective Ensemble for Proximity
Fire
[[Page 54615]]
Fighting, IBR approved for Sec. 1915.505(e).
(4) NFPA 1982-1998, Standard on Personal Alert Safety Systems
(PASS), IBR approved for Sec. 1915.505(e).
(5) NFPA 1983-2001, Standard on Fire Service Life Safety Rope and
System Components, IBR approved for Sec. 1915.505(e).
(6) NFPA 10-2002 Standard for Portable Fire Extinguishers, IBR
approved for Sec. 1915.507(b).
(7) NFPA 14-2003 Standard for the Installation of Standpipe and
Hose Systems, IBR approved for Sec. Sec. 1915.507(b) and (d).
(8) NFPA 72-2002 National Fire Alarm Code, IBR approved for Sec.
1915.507(c).
(9) NFPA 13-2002 Standard for the Installation of Sprinkler
Systems, IBR approved for Sec. 1915.507(d).
(10) NFPA 750-2003 Standard on Water Mist Fire Protection Systems,
IBR approved for Sec. 1915.507(d).
(11) NFPA 25-2002, Inspection, Testing, and Maintenance of Water-
Based Fire Protection Systems, IBR approved for Sec. 1915.507(d).
(12) NFPA 15-2001, Standard for Water Spray Fixed Systems for Fire
Protection, IBR approved for Sec. 1915.507(d).
(13) NFPA 11-2005 Standard for Low-, Medium-, and High-Expansion
Foam, IBR approved for Sec. 1915.507(d).
(14) NFPA 17-2002, Standard for Dry Chemical Extinguishing Systems,
IBR approved for Sec. 1915.507(d).
(15) NFPA 12-2005, Standard on Carbon Dioxide Extinguishing
Systems, IBR approved for Sec. 1915.507(d).
(16) NFPA 12A-2004, Standard on Halon 1301 Fire Extinguishing
Systems, IBR approved for Sec. 1915.507(d).
(17) NFPA 2001-2004, Standard on Clean Agent Fire Extinguishing
Systems, IBR approved for Sec. 1915.507(d).
(18) NFPA 1403-2002, Standard on Live Fire Training Evolutions, IBR
approved for Sec. 1915.508(d).
[FR Doc. 2021-20099 Filed 10-1-21; 8:45 am]
BILLING CODE 4510-26-P
