Initiation of Antidumping and Countervailing Duty Administrative Reviews, 41821-41827 [2021-16497]
Download as PDF
Federal Register / Vol. 86, No. 146 / Tuesday, August 3, 2021 / Notices
instructions to CBP no earlier than 35
days after the date of publication of the
final results of this review in the
Federal Register. If a timely summons is
filed at the U.S. Court of International
Trade, the assessment instructions will
direct CBP not to liquidate relevant
entries until the time for parties to file
a request for a statutory injunction has
expired (i.e., within 90 days of
publication).
Cash Deposit Requirements
The following cash deposit
requirements will be effective upon
publication of the final results of this
administrative review for all shipments
of the subject merchandise from
Vietnam entered, or withdrawn from
warehouse, for consumption on or after
the publication date, as provided for by
section 751(a)(2)(C) of the Act: (1) For
SeAH VINA, a zero cash deposit rate; (2)
for previously investigated or reviewed
Vietnamese and non-Vietnamese
exporters not listed above that received
a separate rate in a prior segment of this
proceeding, the cash deposit rate will
continue to be the exporter-specific rate
published for the most-recently
completed segment of this proceeding in
which the exporter was reviewed; (3) for
all Vietnamese exporters of subject
merchandise which have not been
found to be entitled to a separate rate,
the cash deposit rate will be the rate
established for the Vietnam-wide entity,
which is 111.47 percent; 10 and (4) for
all non-Vietnamese exporters of subject
merchandise which have not received
their own rate, the cash deposit rate will
be the rate applicable to the Vietnamese
exporter that supplied that nonVietnamese exporter with the subject
merchandise. These deposit
requirements, when imposed, shall
remain in effect until further notice.
jbell on DSKJLSW7X2PROD with NOTICES
Notification to Importers
This notice serves as a final reminder
to importers of their responsibility
under 19 CFR 351.402(f)(2) to file a
certificate regarding the reimbursement
of antidumping duties prior to
liquidation of the relevant entries
during this POR. Failure to comply with
this requirement could result in
Commerce’s presumption that
reimbursement of antidumping duties
occurred and the subsequent assessment
of doubled antidumping duties.
10 See Certain Oil Country Tubular Goods from
India, the Republic of Korea, Taiwan, the Republic
of Turkey, and the Socialist Republic of Vietnam:
Antidumping Duty Orders; and Certain Oil Country
Tubular Goods from the Socialist Republic of
Vietnam: Amended Final Determination of Sales at
Less Than Fair Value, 79 FR 53691 (September 10,
2014).
VerDate Sep<11>2014
17:21 Aug 02, 2021
Jkt 253001
Notification Regarding Administrative
Protective Order
This notice also serves as the only
reminder to parties subject to
administrative protective order (APO) of
their responsibility concerning the
disposition of proprietary information
disclosed under APO in accordance
with 19 CFR 351.305(a)(3), which
continues to govern business
proprietary information in this segment
of the proceeding. Timely written
notification of the return or destruction
of APO materials or conversion to
judicial protective order is hereby
requested. Failure to comply with the
regulations and the terms of an APO is
a sanctionable violation.
Notification to Interested Parties
We are issuing and publishing this
notice in accordance with sections
751(a)(1) and 777(i)(1) of the Act, and 19
CFR 351.221(b)(5).
Dated: July 27, 2021.
Christian Marsh,
Acting Assistant Secretary for Enforcement
and Compliance.
Appendix
List of Topics Discussed in the Issues and
Decision Memorandum
I. Summary
II. Background
III. Scope of the Order
IV. Changes Since the Preliminary Results
V. Discussion of the Issues
Comment 1: Adverse Facts Available
Comment 2: Surrogate Country
Comment 3: Financial Statements
Comment 4: Brokerage and Handling
Comment 5: Inland Freight
Comment 6: Differential Pricing
Comment 7: Water
Comment 8: Section 232 Duties
Comment 9: Ministerial Errors
VI. Recommendation
[FR Doc. 2021–16474 Filed 8–2–21; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
Initiation of Antidumping and
Countervailing Duty Administrative
Reviews
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce
(Commerce) has received requests to
conduct administrative reviews of
various antidumping duty (AD) and
countervailing duty (CVD) orders and
findings with June anniversary dates. In
accordance with Commerce’s
AGENCY:
PO 00000
Frm 00011
Fmt 4703
Sfmt 4703
41821
regulations, we are initiating those
administrative reviews.
DATES: Applicable August 3, 2021.
FOR FURTHER INFORMATION CONTACT:
Brenda E. Brown, AD/CVD Operations,
Customs Liaison Unit, Enforcement and
Compliance, International Trade
Administration, U.S. Department of
Commerce, 1401 Constitution Avenue
NW, Washington, DC 20230, telephone:
(202) 482–4735.
SUPPLEMENTARY INFORMATION:
Background
Commerce has received timely
requests, in accordance with 19 CFR
351.213(b), for administrative reviews of
various AD and CVD orders and
findings with June anniversary dates.
All deadlines for the submission of
various types of information,
certifications, or comments or actions by
Commerce discussed below refer to the
number of calendar days from the
applicable starting time.
Notice of No Sales
If a producer or exporter named in
this notice of initiation had no exports,
sales, or entries during the period of
review (POR), it must notify Commerce
within 30 days of publication of this
notice in the Federal Register. All
submissions must be filed electronically
at https://access.trade.gov, in
accordance with 19 CFR 351.303.1 Such
submissions are subject to verification,
in accordance with section 782(i) of the
Tariff Act of 1930, as amended (the Act).
Further, in accordance with 19 CFR
351.303(f)(1)(i), a copy must be served
on every party on Commerce’s service
list.
Respondent Selection
In the event Commerce limits the
number of respondents for individual
examination for administrative reviews
initiated pursuant to requests made for
the orders identified below, Commerce
intends to select respondents based on
U.S. Customs and Border Protection
(CBP) data for U.S. imports during the
POR. We intend to place the CBP data
on the record within five days of
publication of the initiation notice and
to make our decision regarding
respondent selection within 35 days of
publication of the initiation Federal
Register notice. Comments regarding the
CBP data and respondent selection
should be submitted within seven days
after the placement of the CBP data on
the record of this review. Parties
1 See Antidumping and Countervailing Duty
Proceedings: Electronic Filing Procedures;
Administrative Protective Order Procedures, 76 FR
39263 (July 6, 2011).
E:\FR\FM\03AUN1.SGM
03AUN1
41822
Federal Register / Vol. 86, No. 146 / Tuesday, August 3, 2021 / Notices
jbell on DSKJLSW7X2PROD with NOTICES
wishing to submit rebuttal comments
should submit those comments within
five days after the deadline for the
initial comments.
In the event Commerce decides it is
necessary to limit individual
examination of respondents and
conduct respondent selection under
section 777A(c)(2) of the Act, the
following guidelines regarding
collapsing of companies for purposes of
respondent selection will apply. In
general, Commerce has found that
determinations concerning whether
particular companies should be
‘‘collapsed’’ (e.g., treated as a single
entity for purposes of calculating
antidumping duty rates) require a
substantial amount of detailed
information and analysis, which often
require follow-up questions and
analysis. Accordingly, Commerce will
not conduct collapsing analyses at the
respondent selection phase of this
review and will not collapse companies
at the respondent selection phase unless
there has been a determination to
collapse certain companies in a
previous segment of this AD proceeding
(e.g., investigation, administrative
review, new shipper review, or changed
circumstances review). For any
company subject to this review, if
Commerce determined, or continued to
treat, that company as collapsed with
others, Commerce will assume that such
companies continue to operate in the
same manner and will collapse them for
respondent selection purposes.
Otherwise, Commerce will not collapse
companies for purposes of respondent
selection. Parties are requested to (a)
identify which companies subject to
review previously were collapsed, and
(b) provide a citation to the proceeding
in which they were collapsed. Further,
if companies are requested to complete
the Quantity and Value (Q&V)
Questionnaire for purposes of
respondent selection, in general, each
company must report volume and value
data separately for itself. Parties should
not include data for any other party,
even if they believe they should be
treated as a single entity with that other
party. If a company was collapsed with
another company or companies in the
most recently completed segment of this
proceeding where Commerce
considered collapsing that entity,
complete Q&V data for that collapsed
entity must be submitted.
Deadline for Withdrawal of Request for
Administrative Review
Pursuant to 19 CFR 351.213(d)(1), a
party that has requested a review may
withdraw that request within 90 days of
the date of publication of the notice of
VerDate Sep<11>2014
17:21 Aug 02, 2021
Jkt 253001
initiation of the requested review. The
regulation provides that Commerce may
extend this time if it is reasonable to do
so. Determinations by Commerce to
extend the 90-day deadline will be
made on a case-by-case basis.
Deadline for Particular Market
Situation Allegation
Section 504 of the Trade Preferences
Extension Act of 2015 amended the Act
by adding the concept of a particular
market situation (PMS) for purposes of
constructed value under section 773(e)
of the Act.2 Section 773(e) of the Act
states that ‘‘if a particular market
situation exists such that the cost of
materials and fabrication or other
processing of any kind does not
accurately reflect the cost of production
in the ordinary course of trade, the
administering authority may use
another calculation methodology under
this subtitle or any other calculation
methodology.’’ When an interested
party submits a PMS allegation pursuant
to section 773(e) of the Act, Commerce
will respond to such a submission
consistent with 19 CFR 351.301(c)(2)(v).
If Commerce finds that a PMS exists
under section 773(e) of the Act, then it
will modify its dumping calculations
appropriately.
Neither section 773(e) of the Act nor
19 CFR 351.301(c)(2)(v) set a deadline
for the submission of PMS allegations
and supporting factual information.
However, in order to administer section
773(e) of the Act, Commerce must
receive PMS allegations and supporting
factual information with enough time to
consider the submission. Thus, should
an interested party wish to submit a
PMS allegation and supporting new
factual information pursuant to section
773(e) of the Act, it must do so no later
than 20 days after submission of initial
responses to section D of the
questionnaire.
Separate Rates
In proceedings involving non-market
economy (NME) countries, Commerce
begins with a rebuttable presumption
that all companies within the country
are subject to government control and,
thus, should be assigned a single
antidumping duty deposit rate. It is
Commerce’s policy to assign all
exporters of merchandise subject to an
administrative review in an NME
country this single rate unless an
exporter can demonstrate that it is
sufficiently independent so as to be
entitled to a separate rate.
2 See Trade Preferences Extension Act of 2015,
Pubic Law 114–27, 129 Stat. 362 (2015).
PO 00000
Frm 00012
Fmt 4703
Sfmt 4703
To establish whether a firm is
sufficiently independent from
government control of its export
activities to be entitled to a separate
rate, Commerce analyzes each entity
exporting the subject merchandise. In
accordance with the separate rates
criteria, Commerce assigns separate
rates to companies in NME cases only
if respondents can demonstrate the
absence of both de jure and de facto
government control over export
activities.
All firms listed below that wish to
qualify for separate rate status in the
administrative reviews involving NME
countries must complete, as
appropriate, either a separate rate
application or certification, as described
below. For these administrative reviews,
in order to demonstrate separate rate
eligibility, Commerce requires entities
for whom a review was requested, that
were assigned a separate rate in the
most recent segment of this proceeding
in which they participated, to certify
that they continue to meet the criteria
for obtaining a separate rate. The
Separate Rate Certification form will be
available on Commerce’s website at
https://enforcement.trade.gov/nme/
nme-sep-rate.html on the date of
publication of this Federal Register
notice. In responding to the
certification, please follow the
‘‘Instructions for Filing the
Certification’’ in the Separate Rate
Certification. Separate Rate
Certifications are due to Commerce no
later than 30 calendar days after
publication of this Federal Register
notice. The deadline and requirement
for submitting a Certification applies
equally to NME-owned firms, wholly
foreign-owned firms, and foreign sellers
who purchase and export subject
merchandise to the United States.
Entities that currently do not have a
separate rate from a completed segment
of the proceeding 3 should timely file a
Separate Rate Application to
demonstrate eligibility for a separate
rate in this proceeding. In addition,
companies that received a separate rate
in a completed segment of the
proceeding that have subsequently
made changes, including, but not
limited to, changes to corporate
structure, acquisitions of new
companies or facilities, or changes to
3 Such entities include entities that have not
participated in the proceeding, entities that were
preliminarily granted a separate rate in any
currently incomplete segment of the proceeding
(e.g., an ongoing administrative review, new
shipper review, etc.) and entities that lost their
separate rate in the most recently completed
segment of the proceeding in which they
participated.
E:\FR\FM\03AUN1.SGM
03AUN1
Federal Register / Vol. 86, No. 146 / Tuesday, August 3, 2021 / Notices
their official company name,4 should
timely file a Separate Rate Application
to demonstrate eligibility for a separate
rate in this proceeding. The Separate
Rate Application will be available on
Commerce’s website at https://
enforcement.trade.gov/nme/nme-seprate.html on the date of publication of
this Federal Register notice. In
responding to the Separate Rate
Application, refer to the instructions
contained in the application. Separate
Rate Applications are due to Commerce
no later than 30 calendar days after
publication of this Federal Register
notice. The deadline and requirement
for submitting a Separate Rate
Application applies equally to NMEowned firms, wholly foreign-owned
firms, and foreign sellers that purchase
and export subject merchandise to the
United States.
Exporters and producers must file a
timely Separate Rate Application or
Certification if they want to be
considered for respondent selection.
Furthermore, exporters and producers
who submit a Separate Rate Application
41823
or Certification and subsequently are
selected as mandatory respondents will
no longer be eligible for separate rate
status unless they respond to all parts of
the questionnaire as mandatory
respondents.
Initiation of Reviews: In accordance
with 19 CFR 351.221(c)(1)(i), we are
initiating administrative reviews of the
following AD and CVD orders and
findings. We intend to issue the final
results of these reviews not later than
June 30, 2022.
jbell on DSKJLSW7X2PROD with NOTICES
Period to be Reviewed
AD Proceedings
GERMANY: Certain Cold-Drawn Mechanical Tubing of Carbon and Alloy Steel, A–428–845 ..........................................
Benteler Distribution International GmbH
Benteler Steel/Tube GmbH
Mubea Fahrwerksfedern GmbH
Salzgitter Mannesmann Line Pipe GmbH
Salzgitter Mannesmann Precision GmbH
INDIA: Certain Cold-Drawn Mechanical Tubing of Carbon and Alloy Steel, A–533–873 ..................................................
Tube Products of India, Ltd., a unit of Tube Investments of India Limited (collectively ‘‘TPI’’)
INDIA: Glycine, A–533–883 .................................................................................................................................................
Avid Organics Private Limited
GEM Corpochem Private Limited
Indiana Chem-Port
J.R. Corporation
Kumar Industries
Mulji Mehta Enterprises
Mulji Mehta Pharma
Paras Intermediates Private Ltd.
Rexisize Rasayan Industries
Rudraa International
Studio Disrupt
INDIA: Quartz Surface Products, A–533–889 .....................................................................................................................
Alicante Surfaces Pvt., Ltd.
Antique Granito Shareholders Trust
Antique Marbonite Private Limited
Argil Ceramic Private Limited
Argil Ceramics
ARO Granite Industries Limited
Asian Granito India Ltd
Baba Super Minerals Pvt. Ltd.
Camrola Quartz Limited
Chaitanya International Minerals LLP
Chariot International Pvt. Ltd.
Colors Of Rainbow
Creative Quartz LLP
Cuarzo
Divyashakti Granites Limited
Esprit Stones Pvt., Ltd.
Global Stones Private Limited
Globalfair Technologies Pvt.
Glowstone Industries Private Limited
Gupta Marbles
Gyan Chand Lodha
Hi Elite Quartz LLP
Hilltop Stones Pvt., Ltd.
Inani Marbles and Industries Ltd.
International Stones India Private Limited
Jennex Granite Industries
Jessie Kan Granite Inc.
Keros Stone LLP
M.B. Granites Private Ltd.
Mahi Granites Private Limited.
Malbros Marbles & Granites Industries
Marudhar Rocks International Pvt. Ltd.
4 Only changes to the official company name,
rather than trade names, need to be addressed via
VerDate Sep<11>2014
17:21 Aug 02, 2021
Jkt 253001
a Separate Rate Application. Information regarding
PO 00000
Frm 00013
Fmt 4703
Sfmt 4703
6/1/20–5/31/21
6/1/20–5/31/21
6/1/20–5/31/21
12/13/19–5/31/21
new trade names may be submitted via a Separate
Rate Certification.
E:\FR\FM\03AUN1.SGM
03AUN1
41824
Federal Register / Vol. 86, No. 146 / Tuesday, August 3, 2021 / Notices
jbell on DSKJLSW7X2PROD with NOTICES
Period to be Reviewed
Mountmine Imp. & Exp. Pvt., Ltd.
P.M. Quartz Surfaces Pvt., Ltd.
Pacific Industries Limited
Pacific Quartz Surfaces LLP
Pangaea Stone International Private Ltd.
Paradigm Granite Pvt., Ltd.
Paradigm Stone India Private Limited
Pelican Quartz Stone
Pokarna Engineered Stone Limited
Prism Johnson Limited
Quartzkraft LLP
Rocks Forever
Rose Marbles Ltd.
Safayar Ceramics Private Ltd.
Satya Exports
Shivam Enterprises
Southern Rocks and Minerals Private Limited
Stone Imp. & Exp. (India) Pvt., Ltd.
Stoneby India LLP
Sunex Stones Private Ltd.
Tab India Granites Pvt., Ltd.
Ultima International
Vishwas Ceramic
Vishwas Exp.
Yash Gems
ITALY: Certain Cold-Drawn Mechanical Tubing of Carbon and Alloy Steel, A–475–838 ..................................................
Dalmine S.p.A.
Metalfer SpA
JAPAN: Carbon and Alloy Seamless Standard, Line, and Pressure (over 41⁄2 inches), A–588–850 ................................
JFE Shoji Corporation
JFE Steel Corporation
K and I Tubular Corporation
K I Tubular Corporation
K&I Tubular Corporation
Kanematsu Corporation
Mitsui & Co Ltd
Mitsui & Co., Ltd (SAS)
Mitsui and Co., Ltd
Okaya & Co., Ltd
Sumitomo Corporation
JAPAN: Carbon and Alloy Seamless Standard, Line, and Pressure (under 41⁄2 inches), A–588–851 ..............................
JFE Shoji Corporation
JFE Steel Corporation
K and I Tubular Corporation
K I Tubular Corporation
K&I Tubular Corporation
Kanematsu Corporation
Mitsui & Co Ltd
Mitsui & Co., Ltd (SAS)
Mitsui and Co., Ltd
Okaya & Co., Ltd
Sumitomo Corporation
JAPAN: Glycine, A–588–878 ...............................................................................................................................................
Yuki Gosei Kogyo Co., Ltd.
Nagase & Co., Ltd.
Showa Denko K.K.
Yasunaga Trading Co., Ltd.
SPAIN: Finished Carbon Steel Flanges, A–469–815 .........................................................................................................
Aleaciones De Metales Sinterizados S.A.
Central Y Almacenes
Farina Group Spain
Friedrich Geldbach Gmbh
Grupo Cunado
Transglory S.A.
Tubacero, S.L.
ULMA Forja, S.Coop
SWITZERLAND: Certain Cold-Drawn Mechanical Tubing of Carbon and Alloy Steel, A–441–801 ..................................
Benteler Rothrist AG
Mubea Inc.
Mubea Pra¨zisionsstahlrohr AG
THE PEOPLE’S REPUBLIC OF CHINA: Chlorinated Isocyanurates, A–570–898 ............................................................
Heze Huayi Chemical Co., Ltd.
Juancheng Kangtai Chemical Co., Ltd.
THE PEOPLE’S REPUBLIC OF CHINA: Tapered Roller Bearings, A–570–601 ...............................................................
VerDate Sep<11>2014
17:21 Aug 02, 2021
Jkt 253001
PO 00000
Frm 00014
Fmt 4703
Sfmt 4703
E:\FR\FM\03AUN1.SGM
03AUN1
6/1/20–5/31/21
6/1/20–5/31/21
6/1/20–5/31/21
6/1/20–5/31/21
6/1/20–5/31/21
6/1/20–5/31/21
6/1/20–5/31/21
6/1/20–5/31/21
Federal Register / Vol. 86, No. 146 / Tuesday, August 3, 2021 / Notices
41825
jbell on DSKJLSW7X2PROD with NOTICES
Period to be Reviewed
C&U Group Shanghai Bearing Co., Ltd.
Changshan Peer Bearing Co., Ltd.
GGB Bearing Technology (Suzhou) Co., Ltd.
Hangzhou C&U Automotive Bearing Co., Ltd.
Hangzhou C&U Metallurgy Bearing Co., Ltd.
Hebei Xintai Bearing Forging Co., Ltd
Huangshi C&U Bearing Co., Ltd
Shanghai Tainai Bearing Co., Ltd.
Sichuan C&U Bearing Co., Ltd.
Xinchang Newsun Xintianlong Precision Bearing Manufacturing Co., Ltd
Zhejiang Jingli Bearing Technology Co., Ltd.
THE PEOPLE’S REPUBLIC OF CHINA: Wooden Cabinets and Vanities and Components Thereof,5 A–570–106 ........
Hangzhou Hoca Kitchen & Bath Products Co., Ltd.
Linyi Bonn Flooring Manufacturing Co., Ltd.
TURKEY: Large Diameter Welded Pipe,6 A–489–833 .......................................................................................................
Borusan Mannesmann Boru Sanayi ve Ticaret A.S.
TURKEY: Quartz Surface Products, A–489–837 ................................................................................................................
Belenco Dis Ticaret A.S.
CVD Proceedings
INDIA: Glycine, C–533–884 ................................................................................................................................................
Avid Organics Private Limited
Indiana Chem-Port
J.R. Corporation
Kumar Industries
Mulji Mehta Enterprises
Mulji Mehta Pharma
Paras Intermediates Private Ltd.
Rexisize Rasayan Industries
Rudraa International
Studio Disrupt
INDIA: Quartz Surface Products, C–533–890 .....................................................................................................................
Antique Marbonite Pvt. Ltd.
Argil Ceramics
ARO Granite Industries Limited
Baba Super Minerals Pvt. Ltd.
Camrola Quartz Limited
Cuarzo
Divyashakti Granites Limited
Esprit Stones Pvt. Ltd.
Global Stones Pvt. Ltd.
Hi Elite Quartz LLP, India
Keros Stone LLP
Mahi Granites Pvt. Ltd.
Malbros Marbles & Granites Industries
Pacific Industries Limited
Pacific Quartz Surfaces LLP
Paradigm Stone India Pvt. Ltd.
Pelican Quartz Stone
Pokarna Engineered Stone Limited
Rocks Forever
Satya Exports
Shivam Enterprises
Southern Rocks and Minerals Pvt. Ltd
Sunex Stones Private Limited, India
Tab India Granites Private Limited, India
THE PEOPLE’S REPUBLIC OF CHINA: Glycine, C–570–081 ..........................................................................................
A.H.A. International Co., Ltd.
Aqua Bond Inc.
Baoding Mantong Fine Chemistry Co., Ltd.
Beijing Lanjian Xingda Industrial & Trade Co., Ltd.
Elementis, Srl, Inc.
Hebei Changhao Biotechnology Co., Ltd.
Hebei Pushi Yongdao Trade Co., Ltd.
THE PEOPLE’S REPUBLIC OF CHINA: High Pressure Steel Cylinders, C–570–978 ......................................................
Beijing Tianhai Industry Co., Ltd.
Tianjin Tianhai High Pressure Container Co., Ltd.7
Langfang Tianhai High Pressure Container Co., Ltd
THE PEOPLE’S REPUBLIC OF CHINA: Wooden Cabinets and Vanities and Components Thereof,8 C–570–107 ........
Hangzhou Hoca Kitchen & Bath Products Co., Ltd.
Linyi Bonn Flooring Manufacturing Co., Ltd
TURKEY: Large Diameter Welded Pipe,9 C–489–834 1/1/20–12/31/20
Borusan Mannesmann Boru Sanayi ve Ticaret A.S.
TURKEY: Quartz Surface Products, C–489–838 ................................................................................................................
Belenco Dis Ticaret A.S.
VerDate Sep<11>2014
17:21 Aug 02, 2021
Jkt 253001
PO 00000
Frm 00015
Fmt 4703
Sfmt 4703
E:\FR\FM\03AUN1.SGM
03AUN1
10/9/19–3/31/21
5/1/20–4/30/21
12/13/19–5/31/21
1/1/20–12/31/20
10/11/19–12/31/20
1/1/20–12/31/20
1/1/20–12/31/20
8/12/19–12/31/20
10/11/19–12/31/20
41826
Federal Register / Vol. 86, No. 146 / Tuesday, August 3, 2021 / Notices
Suspension Agreements
None.
Duty Absorption Reviews
During any administrative review
covering all or part of a period falling
between the first and second or third
and fourth anniversary of the
publication of an AD order under 19
CFR 351.211 or a determination under
19 CFR 351.218(f)(4) to continue an
order or suspended investigation (after
sunset review), Commerce, if requested
by a domestic interested party within 30
days of the date of publication of the
notice of initiation of the review, will
determine whether AD duties have been
absorbed by an exporter or producer
subject to the review if the subject
jbell on DSKJLSW7X2PROD with NOTICES
5The
initiation notice published on June 11, 2021
(86 FR 31282) listed the names of two companies
incorrectly. The names were incorrectly listed as
Hangzhou Hoco Kitchen & Bath Products Co., Ltd.
and Linyi Bonn Flooring Manufacture Co., Ltd.
However, the correct spellings are Hangzhou Hoca
Kitchen & Bath Products Co., Ltd. and Linyi Bonn
Flooring Manufacturing Co., Ltd. as listed in this
initiation notice. See Memorandum, ‘‘Antidumping
Duty Administrative Review of Wooden Cabinets
and Vanities and Components Thereof from the
People’s Republic of China; Correction to Company
Names,’’ dated July 20, 2021.
6 In the initiation notice that published on July 6,
2021 (86 FR 35481), Commerce omitted Borusan
Mannesmann Boru Sanayi ve Ticaret A.S.
(Borusan). We note that subject merchandise
produced and exported by Borusan was excluded
from the order effective June 1, 2020. See Large
Diameter Welded Pipe from the Republic of Turkey:
Notice of Court Decision Not in Harmony With
Amended Final Determination in the Less-ThanFair-Value Investigation; Notice of Amended Final
Determination Pursuant to Court Decision; and
Notice of Revocation of Antidumping Duty Order,
in Part, 85 FR 35262, 35264 (June 9, 2020).
Commerce also stated in this notice that it would
not initiate any new reviews of Borusan’s entries.
Accordingly, we are initiating this administrative
review with respect to Borusan only for subject
merchandise produced in Turkey where Borusan
acted as either the manufacturer or exporter (but not
both).
7 This company is also known as Tianjin Tianhai
High Pressure Corp., Ltd.
8 The initiation notice published on June 11, 2021
(86 FR 31282) listed the names of two companies
incorrectly. The names were incorrectly listed as
Hangzhou Hoco Kitchen & bath Products Co., Ltd.
and Linyi Bonn Flooring Manufacture Co., Ltd.
However, the correct spellings are Hangzhou Hoca
Kitchen & Bath Products Co., Ltd. and Linyi Bonn
Flooring Manufacturing Co., Ltd. as listed in this
initiation notice. See Husch Blackwell LLP’s Letter,
‘‘Wooden Cabinets and Vanities from the People’s
Republic of China: Name Corrections,’’ dated July
23, 2021.
9 In the initiation notice that published on July 6,
2021 (86 FR 35481), Commerce omitted Borusan
Mannesmann Boru Sanayi ve Ticaret A.S.
(Borusan). We note that subject merchandise
produced and exported by Borusan was excluded
from the order. See Large Diameter Welded Pipe
From the Republic of Turkey: Countervailing Duty
Order, 84 FR 18771, 18772 (May 2, 2019).
Accordingly, we are initiating this administrative
review with respect to Borusan only for subject
merchandise produced in Turkey where Borusan
acted as either the manufacturer or exporter (but not
both).
VerDate Sep<11>2014
17:21 Aug 02, 2021
Jkt 253001
merchandise is sold in the United States
through an importer that is affiliated
with such exporter or producer. The
request must include the name(s) of the
exporter or producer for which the
inquiry is requested.
Gap Period Liquidation
For the first administrative review of
any order, there will be no assessment
of antidumping or countervailing duties
on entries of subject merchandise
entered, or withdrawn from warehouse,
for consumption during the relevant
‘‘gap’’ period of the order (i.e., the
period following the expiry of
provisional measures and before
definitive measures were put into
place), if such a gap period is applicable
to the POR.
Administrative Protective Orders and
Letters of Appearance
Interested parties must submit
applications for disclosure under
administrative protective orders in
accordance with the procedures
outlined in Commerce’s regulations at
19 CFR 351.305. Those procedures
apply to administrative reviews
included in this notice of initiation.
Parties wishing to participate in any of
these administrative reviews should
ensure that they meet the requirements
of these procedures (e.g., the filing of
separate letters of appearance as
discussed at 19 CFR 351.103(d)).
Factual Information Requirements
Commerce’s regulations identify five
categories of factual information in 19
CFR 351.102(b)(21), which are
summarized as follows: (i) Evidence
submitted in response to questionnaires;
(ii) evidence submitted in support of
allegations; (iii) publicly available
information to value factors under 19
CFR 351.408(c) or to measure the
adequacy of remuneration under 19 CFR
351.511(a)(2); (iv) evidence placed on
the record by Commerce; and (v)
evidence other than factual information
described in (i)–(iv). These regulations
require any party, when submitting
factual information, to specify under
which subsection of 19 CFR
351.102(b)(21) the information is being
submitted and, if the information is
submitted to rebut, clarify, or correct
factual information already on the
record, to provide an explanation
identifying the information already on
the record that the factual information
seeks to rebut, clarify, or correct. The
regulations, at 19 CFR 351.301, also
provide specific time limits for such
factual submissions based on the type of
factual information being submitted.
PO 00000
Frm 00016
Fmt 4703
Sfmt 4703
Please review the Final Rule,10 available
at https://enforcement.trade.gov/frn/
2013/1304frn/2013-08227.txt, prior to
submitting factual information in this
segment. Note that Commerce has
temporarily modified certain of its
requirements for serving documents
containing business proprietary
information, until further notice.11
Any party submitting factual
information in an AD or CVD
proceeding must certify to the accuracy
and completeness of that information
using the formats provided at the end of
the Final Rule.12 Commerce intends to
reject factual submissions in any
proceeding segments if the submitting
party does not comply with applicable
certification requirements.
Extension of Time Limits Regulation
Parties may request an extension of
time limits before a time limit
established under Part 351 expires, or as
otherwise specified by Commerce.13 In
general, an extension request will be
considered untimely if it is filed after
the time limit established under Part
351 expires. For submissions which are
due from multiple parties
simultaneously, an extension request
will be considered untimely if it is filed
after 10:00 a.m. on the due date.
Examples include, but are not limited
to: (1) Case and rebuttal briefs, filed
pursuant to 19 CFR 351.309; (2) factual
information to value factors under 19
CFR 351.408(c), or to measure the
adequacy of remuneration under 19 CFR
351.511(a)(2), filed pursuant to 19 CFR
351.301(c)(3) and rebuttal, clarification
and correction filed pursuant to 19 CFR
351.301(c)(3)(iv); (3) comments
concerning the selection of a surrogate
country and surrogate values and
rebuttal; (4) comments concerning CBP
data; and (5) Q&V questionnaires. Under
certain circumstances, Commerce may
elect to specify a different time limit by
which extension requests will be
considered untimely for submissions
which are due from multiple parties
simultaneously. In such a case,
Commerce will inform parties in the
letter or memorandum setting forth the
10 See Certification of Factual Information To
Import Administration During Antidumping and
Countervailing Duty Proceedings, 78 FR 42678 (July
17, 2013) (Final Rule); see also the frequently asked
questions regarding the Final Rule, available at
https://enforcement.trade.gov/tlei/notices/factual_
info_final_rule_FAQ_07172013.pdf.
11 See Temporary Rule Modifying AD/CVD
Service Requirements Due to COVID–19, 85 FR
41363 (July 10, 2020).
12 See section 782(b) of the Act; see also Final
Rule; and the frequently asked questions regarding
the Final Rule, available at https://
enforcement.trade.gov/tlei/notices/factual_info_
final_rule_FAQ_07172013.pdf.
13 See 19 CFR 351.302.
E:\FR\FM\03AUN1.SGM
03AUN1
Federal Register / Vol. 86, No. 146 / Tuesday, August 3, 2021 / Notices
deadline (including a specified time) by
which extension requests must be filed
to be considered timely. This policy also
requires that an extension request must
be made in a separate, stand-alone
submission, and clarifies the
circumstances under which Commerce
will grant untimely-filed requests for the
extension of time limits. Please review
the Final Rule, available at https://
www.gpo.gov/fdsys/pkg/FR-2013-09-20/
html/2013-22853.htm, prior to
submitting factual information in these
segments.
These initiations and this notice are
in accordance with section 751(a) of the
Act (19 U.S.C. 1675(a)) and 19 CFR
351.221(c)(1)(i).
Dated: July 29, 2021.
James Maeder,
Deputy Assistant Secretary for Antidumping
and Countervailing Duty Operations.
[FR Doc. 2021–16497 Filed 8–2–21; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–475–818]
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce
(Commerce) is conducting an
administrative review of the
antidumping duty (AD) order on certain
pasta (pasta) from Italy, covering the
period July 1, 2019, through June 30,
2020. We preliminarily determine that
La Molisana S.p.A. (La Molisana) sold
pasta from Italy at less than normal
value during the period of review (POR),
and that Liguori Pastificio dal 1820
S.p.A. (Liguori) and Pastificio Della
Forma S.r.l. (Della Forma) did not sell
subject merchandise at less than normal
value during the POR. Interested parties
are invited to comment on these
preliminary results.
DATES: Applicable August 3, 2021.
FOR FURTHER INFORMATION CONTACT:
Jonathan Hall-Eastman and John
Hoffner, AD/CVD Operations, Office III,
Enforcement and Compliance,
International Trade Administration,
U.S. Department of Commerce, 1401
Constitution Avenue NW, Washington,
DC 20230; telephone: (202) 482–1468
and (202) 482–3315, respectively.
SUPPLEMENTARY INFORMATION:
jbell on DSKJLSW7X2PROD with NOTICES
VerDate Sep<11>2014
17:21 Aug 02, 2021
Jkt 253001
On July 24, 1996, Commerce
published the AD order in the Federal
Register.1 On September 3, 2020,
pursuant to section 751(a)(1) of the
Tariff Act of 1930, as amended (the Act),
Commerce initiated an administrative
review of the Order covering the
following companies: Agritalia S.r.L.,
Armonie D’Italia srl, F. Divella S.p.A.,
La Molisana, Liguori, Pasta Castiglioni,
Pasta Zara, S.p.A, Pastificio Della Forma
S.r.l. (Della Forma), Pastificio C.A.M.S.
Srl, and Pastificio Fratelli De Luca S.r.l,
and Rummo S.p.A. (Rummo).2 On
February 1, 2021, Commerce rescinded
the review of Rummo and its subsidiary
Pasta Castiglioni.3 On October 15, 2010,
we selected La Molisana and Liguori for
individual examination in this review.4
Further, we have preliminarily
collapsed Liguori and Della Forma and
have considered these two companies to
constitute a single entity.5
On March 2, 2021, Commerce
extended the deadline for the
preliminary results to July 30, 2021.6
For a complete description of the events
that followed the initiation of this
review, see the Preliminary Decision
Memorandum.7
Scope of the Order
Certain Pasta From Italy: Preliminary
Results of Antidumping Duty
Administrative Review; 2019–2020
AGENCY:
Background
The products covered by this order
are certain pasta from Italy. For a full
description of the scope, see the
Preliminary Decision Memorandum.
Methodology
Commerce is conducting this review
in accordance with section 751(a)(1)(B)
of the Act. Export price was calculated
in accordance with section 772 of the
Act. Normal value was calculated in
1 See Notice of Antidumping Duty Order and
Amended Final Determination of Sales at Less
Than Fair Value: Certain Pasta from Italy, 61 FR
38547 (July 24, 1996) (Order).
2 See Initiation of Antidumping and
Countervailing Duty Administrative Reviews, 85 FR
54983 (September 3, 2020).
3 See Certain Pasta from Italy: Notice of Partial
Rescission of Antidumping Duty Administrative
Review, 86 FR 7700 (February 1, 2021).
4 See Memorandum, ‘‘2019–2020 Antidumping
Duty Administrative Review of Certain Pasta from
Italy: Respondent Selection,’’ dated October 15,
2020.
5 See Memorandum, ‘‘Preliminary Affiliation and
Collapsing Memorandum for Liguori Pastificio dal
1820 S.p.A. and Pastificio della Forma S.r.l,’’ dated
concurrently with this notice.
6 See Memorandum, ‘‘Certain Pasta: Extension of
Time Limit for Preliminary Results of Antidumping
Duty Administrative Review; 2019/2020,’’ dated
March 2, 2021.
7 See Memorandum, ‘‘Issues and Decision
Memorandum for the Preliminary Results of
Antidumping Duty Administrative Review: Certain
Pasta from Italy; 2019–2020,’’ dated concurrently
with, and hereby adopted by, this notice
(Preliminary Decision Memorandum).
PO 00000
Frm 00017
Fmt 4703
Sfmt 4703
41827
accordance with section 773 of the Act.
For a full description of the
methodology underlying our
conclusions, see the Preliminary
Decision Memorandum.
The Preliminary Decision
Memorandum is a public document and
is on file electronically via Enforcement
and Compliance’s Antidumping and
Countervailing Duty Centralized
Electronic Service System (ACCESS).
ACCESS is available to registered users
at https://access.trade.gov. In addition, a
complete version of the Preliminary
Decision Memorandum can be accessed
directly at https://enforcement.trade.gov/
frn/. A list of topics
discussed in the Preliminary Decision
Memorandum is attached as an
appendix to this notice.
Rate for Non-Selected Companies
The statute and Commerce’s
regulations do not address the
determination of a weighted-average
dumping margin for individual
companies not selected for individual
examination when Commerce limits its
examination in an administrative review
pursuant to section 777A(c)(2) of the
Act. Generally, Commerce looks to
section 735(c)(5) of the Act, which
provides instructions for calculating the
all-others rate in an investigation, for
guidance when determining the
weighted-average dumping margin for
companies which we did not examine
in an administrative review. Section
735(c)(5)(A) of the Act establishes a
preference to avoid using rates which
are zero, de minimis, or based entirely
on facts available in calculating an allothers rate. Accordingly, Commerce’s
practice in an administrative review has
been to average the weighted-average
dumping margins for the companies
selected for individual examination in
the administrative review, excluding
rates that are zero, de minimis, or based
entirely on facts available.8 For the
preliminary results of this review, we
calculated a weighted-average dumping
margin for La Molisana that is not zero,
de minimis or based entirely on facts
available, while we have calculated a
weighted-average dumping margin for
Liguori/Della Forma that is de minimis.
Therefore, consistent with our practice,
we have determined the weightedaverage dumping margin for the
companies not selected for individual
examination that is equal to the
8 See, e.g., Ball Bearings and Parts Thereof from
France, Germany, Italy, Japan, and the United
Kingdom: Final Results of Antidumping Duty
Administrative Reviews and Rescission of Reviews
in Part, 73 FR 52823, 52824 (September 11, 2008),
and accompanying Issues and Decision
Memorandum at Comment 16.
E:\FR\FM\03AUN1.SGM
03AUN1
Agencies
[Federal Register Volume 86, Number 146 (Tuesday, August 3, 2021)]
[Notices]
[Pages 41821-41827]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-16497]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
Initiation of Antidumping and Countervailing Duty Administrative
Reviews
AGENCY: Enforcement and Compliance, International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce (Commerce) has received requests to
conduct administrative reviews of various antidumping duty (AD) and
countervailing duty (CVD) orders and findings with June anniversary
dates. In accordance with Commerce's regulations, we are initiating
those administrative reviews.
DATES: Applicable August 3, 2021.
FOR FURTHER INFORMATION CONTACT: Brenda E. Brown, AD/CVD Operations,
Customs Liaison Unit, Enforcement and Compliance, International Trade
Administration, U.S. Department of Commerce, 1401 Constitution Avenue
NW, Washington, DC 20230, telephone: (202) 482-4735.
SUPPLEMENTARY INFORMATION:
Background
Commerce has received timely requests, in accordance with 19 CFR
351.213(b), for administrative reviews of various AD and CVD orders and
findings with June anniversary dates.
All deadlines for the submission of various types of information,
certifications, or comments or actions by Commerce discussed below
refer to the number of calendar days from the applicable starting time.
Notice of No Sales
If a producer or exporter named in this notice of initiation had no
exports, sales, or entries during the period of review (POR), it must
notify Commerce within 30 days of publication of this notice in the
Federal Register. All submissions must be filed electronically at
https://access.trade.gov, in accordance with 19 CFR 351.303.\1\ Such
submissions are subject to verification, in accordance with section
782(i) of the Tariff Act of 1930, as amended (the Act). Further, in
accordance with 19 CFR 351.303(f)(1)(i), a copy must be served on every
party on Commerce's service list.
---------------------------------------------------------------------------
\1\ See Antidumping and Countervailing Duty Proceedings:
Electronic Filing Procedures; Administrative Protective Order
Procedures, 76 FR 39263 (July 6, 2011).
---------------------------------------------------------------------------
Respondent Selection
In the event Commerce limits the number of respondents for
individual examination for administrative reviews initiated pursuant to
requests made for the orders identified below, Commerce intends to
select respondents based on U.S. Customs and Border Protection (CBP)
data for U.S. imports during the POR. We intend to place the CBP data
on the record within five days of publication of the initiation notice
and to make our decision regarding respondent selection within 35 days
of publication of the initiation Federal Register notice. Comments
regarding the CBP data and respondent selection should be submitted
within seven days after the placement of the CBP data on the record of
this review. Parties
[[Page 41822]]
wishing to submit rebuttal comments should submit those comments within
five days after the deadline for the initial comments.
In the event Commerce decides it is necessary to limit individual
examination of respondents and conduct respondent selection under
section 777A(c)(2) of the Act, the following guidelines regarding
collapsing of companies for purposes of respondent selection will
apply. In general, Commerce has found that determinations concerning
whether particular companies should be ``collapsed'' (e.g., treated as
a single entity for purposes of calculating antidumping duty rates)
require a substantial amount of detailed information and analysis,
which often require follow-up questions and analysis. Accordingly,
Commerce will not conduct collapsing analyses at the respondent
selection phase of this review and will not collapse companies at the
respondent selection phase unless there has been a determination to
collapse certain companies in a previous segment of this AD proceeding
(e.g., investigation, administrative review, new shipper review, or
changed circumstances review). For any company subject to this review,
if Commerce determined, or continued to treat, that company as
collapsed with others, Commerce will assume that such companies
continue to operate in the same manner and will collapse them for
respondent selection purposes. Otherwise, Commerce will not collapse
companies for purposes of respondent selection. Parties are requested
to (a) identify which companies subject to review previously were
collapsed, and (b) provide a citation to the proceeding in which they
were collapsed. Further, if companies are requested to complete the
Quantity and Value (Q&V) Questionnaire for purposes of respondent
selection, in general, each company must report volume and value data
separately for itself. Parties should not include data for any other
party, even if they believe they should be treated as a single entity
with that other party. If a company was collapsed with another company
or companies in the most recently completed segment of this proceeding
where Commerce considered collapsing that entity, complete Q&V data for
that collapsed entity must be submitted.
Deadline for Withdrawal of Request for Administrative Review
Pursuant to 19 CFR 351.213(d)(1), a party that has requested a
review may withdraw that request within 90 days of the date of
publication of the notice of initiation of the requested review. The
regulation provides that Commerce may extend this time if it is
reasonable to do so. Determinations by Commerce to extend the 90-day
deadline will be made on a case-by-case basis.
Deadline for Particular Market Situation Allegation
Section 504 of the Trade Preferences Extension Act of 2015 amended
the Act by adding the concept of a particular market situation (PMS)
for purposes of constructed value under section 773(e) of the Act.\2\
Section 773(e) of the Act states that ``if a particular market
situation exists such that the cost of materials and fabrication or
other processing of any kind does not accurately reflect the cost of
production in the ordinary course of trade, the administering authority
may use another calculation methodology under this subtitle or any
other calculation methodology.'' When an interested party submits a PMS
allegation pursuant to section 773(e) of the Act, Commerce will respond
to such a submission consistent with 19 CFR 351.301(c)(2)(v). If
Commerce finds that a PMS exists under section 773(e) of the Act, then
it will modify its dumping calculations appropriately.
---------------------------------------------------------------------------
\2\ See Trade Preferences Extension Act of 2015, Pubic Law 114-
27, 129 Stat. 362 (2015).
---------------------------------------------------------------------------
Neither section 773(e) of the Act nor 19 CFR 351.301(c)(2)(v) set a
deadline for the submission of PMS allegations and supporting factual
information. However, in order to administer section 773(e) of the Act,
Commerce must receive PMS allegations and supporting factual
information with enough time to consider the submission. Thus, should
an interested party wish to submit a PMS allegation and supporting new
factual information pursuant to section 773(e) of the Act, it must do
so no later than 20 days after submission of initial responses to
section D of the questionnaire.
Separate Rates
In proceedings involving non-market economy (NME) countries,
Commerce begins with a rebuttable presumption that all companies within
the country are subject to government control and, thus, should be
assigned a single antidumping duty deposit rate. It is Commerce's
policy to assign all exporters of merchandise subject to an
administrative review in an NME country this single rate unless an
exporter can demonstrate that it is sufficiently independent so as to
be entitled to a separate rate.
To establish whether a firm is sufficiently independent from
government control of its export activities to be entitled to a
separate rate, Commerce analyzes each entity exporting the subject
merchandise. In accordance with the separate rates criteria, Commerce
assigns separate rates to companies in NME cases only if respondents
can demonstrate the absence of both de jure and de facto government
control over export activities.
All firms listed below that wish to qualify for separate rate
status in the administrative reviews involving NME countries must
complete, as appropriate, either a separate rate application or
certification, as described below. For these administrative reviews, in
order to demonstrate separate rate eligibility, Commerce requires
entities for whom a review was requested, that were assigned a separate
rate in the most recent segment of this proceeding in which they
participated, to certify that they continue to meet the criteria for
obtaining a separate rate. The Separate Rate Certification form will be
available on Commerce's website at https://enforcement.trade.gov/nme/nme-sep-rate.html on the date of publication of this Federal Register
notice. In responding to the certification, please follow the
``Instructions for Filing the Certification'' in the Separate Rate
Certification. Separate Rate Certifications are due to Commerce no
later than 30 calendar days after publication of this Federal Register
notice. The deadline and requirement for submitting a Certification
applies equally to NME-owned firms, wholly foreign-owned firms, and
foreign sellers who purchase and export subject merchandise to the
United States.
Entities that currently do not have a separate rate from a
completed segment of the proceeding \3\ should timely file a Separate
Rate Application to demonstrate eligibility for a separate rate in this
proceeding. In addition, companies that received a separate rate in a
completed segment of the proceeding that have subsequently made
changes, including, but not limited to, changes to corporate structure,
acquisitions of new companies or facilities, or changes to
[[Page 41823]]
their official company name,\4\ should timely file a Separate Rate
Application to demonstrate eligibility for a separate rate in this
proceeding. The Separate Rate Application will be available on
Commerce's website at https://enforcement.trade.gov/nme/nme-sep-rate.html on the date of publication of this Federal Register notice.
In responding to the Separate Rate Application, refer to the
instructions contained in the application. Separate Rate Applications
are due to Commerce no later than 30 calendar days after publication of
this Federal Register notice. The deadline and requirement for
submitting a Separate Rate Application applies equally to NME-owned
firms, wholly foreign-owned firms, and foreign sellers that purchase
and export subject merchandise to the United States.
---------------------------------------------------------------------------
\3\ Such entities include entities that have not participated in
the proceeding, entities that were preliminarily granted a separate
rate in any currently incomplete segment of the proceeding (e.g., an
ongoing administrative review, new shipper review, etc.) and
entities that lost their separate rate in the most recently
completed segment of the proceeding in which they participated.
\4\ Only changes to the official company name, rather than trade
names, need to be addressed via a Separate Rate Application.
Information regarding new trade names may be submitted via a
Separate Rate Certification.
---------------------------------------------------------------------------
Exporters and producers must file a timely Separate Rate
Application or Certification if they want to be considered for
respondent selection. Furthermore, exporters and producers who submit a
Separate Rate Application or Certification and subsequently are
selected as mandatory respondents will no longer be eligible for
separate rate status unless they respond to all parts of the
questionnaire as mandatory respondents.
Initiation of Reviews: In accordance with 19 CFR 351.221(c)(1)(i),
we are initiating administrative reviews of the following AD and CVD
orders and findings. We intend to issue the final results of these
reviews not later than June 30, 2022.
------------------------------------------------------------------------
Period to be Reviewed
------------------------------------------------------------------------
AD Proceedings
GERMANY: Certain Cold-Drawn Mechanical Tubing 6/1/20-5/31/21
of Carbon and Alloy Steel, A-428-845..........
Benteler Distribution International GmbH
Benteler Steel/Tube GmbH
Mubea Fahrwerksfedern GmbH
Salzgitter Mannesmann Line Pipe GmbH
Salzgitter Mannesmann Precision GmbH
INDIA: Certain Cold-Drawn Mechanical Tubing of 6/1/20-5/31/21
Carbon and Alloy Steel, A-533-873.............
Tube Products of India, Ltd., a unit of
Tube Investments of India Limited
(collectively ``TPI'')
INDIA: Glycine, A-533-883...................... 6/1/20-5/31/21
Avid Organics Private Limited
GEM Corpochem Private Limited
Indiana Chem-Port
J.R. Corporation
Kumar Industries
Mulji Mehta Enterprises
Mulji Mehta Pharma
Paras Intermediates Private Ltd.
Rexisize Rasayan Industries
Rudraa International
Studio Disrupt
INDIA: Quartz Surface Products, A-533-889...... 12/13/19-5/31/21
Alicante Surfaces Pvt., Ltd.
Antique Granito Shareholders Trust
Antique Marbonite Private Limited
Argil Ceramic Private Limited
Argil Ceramics
ARO Granite Industries Limited
Asian Granito India Ltd
Baba Super Minerals Pvt. Ltd.
Camrola Quartz Limited
Chaitanya International Minerals LLP
Chariot International Pvt. Ltd.
Colors Of Rainbow
Creative Quartz LLP
Cuarzo
Divyashakti Granites Limited
Esprit Stones Pvt., Ltd.
Global Stones Private Limited
Globalfair Technologies Pvt.
Glowstone Industries Private Limited
Gupta Marbles
Gyan Chand Lodha
Hi Elite Quartz LLP
Hilltop Stones Pvt., Ltd.
Inani Marbles and Industries Ltd.
International Stones India Private Limited
Jennex Granite Industries
Jessie Kan Granite Inc.
Keros Stone LLP
M.B. Granites Private Ltd.
Mahi Granites Private Limited.
Malbros Marbles & Granites Industries
Marudhar Rocks International Pvt. Ltd.
[[Page 41824]]
Mountmine Imp. & Exp. Pvt., Ltd.
P.M. Quartz Surfaces Pvt., Ltd.
Pacific Industries Limited
Pacific Quartz Surfaces LLP
Pangaea Stone International Private Ltd.
Paradigm Granite Pvt., Ltd.
Paradigm Stone India Private Limited
Pelican Quartz Stone
Pokarna Engineered Stone Limited
Prism Johnson Limited
Quartzkraft LLP
Rocks Forever
Rose Marbles Ltd.
Safayar Ceramics Private Ltd.
Satya Exports
Shivam Enterprises
Southern Rocks and Minerals Private Limited
Stone Imp. & Exp. (India) Pvt., Ltd.
Stoneby India LLP
Sunex Stones Private Ltd.
Tab India Granites Pvt., Ltd.
Ultima International
Vishwas Ceramic
Vishwas Exp.
Yash Gems
ITALY: Certain Cold-Drawn Mechanical Tubing of 6/1/20-5/31/21
Carbon and Alloy Steel, A-475-838.............
Dalmine S.p.A.
Metalfer SpA
JAPAN: Carbon and Alloy Seamless Standard, 6/1/20-5/31/21
Line, and Pressure (over 4\1/2\ inches), A-588-
850...........................................
JFE Shoji Corporation
JFE Steel Corporation
K and I Tubular Corporation
K I Tubular Corporation
K&I Tubular Corporation
Kanematsu Corporation
Mitsui & Co Ltd
Mitsui & Co., Ltd (SAS)
Mitsui and Co., Ltd
Okaya & Co., Ltd
Sumitomo Corporation
JAPAN: Carbon and Alloy Seamless Standard, 6/1/20-5/31/21
Line, and Pressure (under 4\1/2\ inches), A-
588-851.......................................
JFE Shoji Corporation
JFE Steel Corporation
K and I Tubular Corporation
K I Tubular Corporation
K&I Tubular Corporation
Kanematsu Corporation
Mitsui & Co Ltd
Mitsui & Co., Ltd (SAS)
Mitsui and Co., Ltd
Okaya & Co., Ltd
Sumitomo Corporation
JAPAN: Glycine, A-588-878...................... 6/1/20-5/31/21
Yuki Gosei Kogyo Co., Ltd.
Nagase & Co., Ltd.
Showa Denko K.K.
Yasunaga Trading Co., Ltd.
SPAIN: Finished Carbon Steel Flanges, A-469-815 6/1/20-5/31/21
Aleaciones De Metales Sinterizados S.A.
Central Y Almacenes
Farina Group Spain
Friedrich Geldbach Gmbh
Grupo Cunado
Transglory S.A.
Tubacero, S.L.
ULMA Forja, S.Coop
SWITZERLAND: Certain Cold-Drawn Mechanical 6/1/20-5/31/21
Tubing of Carbon and Alloy Steel, A-441-801...
Benteler Rothrist AG
Mubea Inc.
Mubea Pr[auml]zisionsstahlrohr AG
THE PEOPLE'S REPUBLIC OF CHINA: Chlorinated 6/1/20-5/31/21
Isocyanurates, A-570-898......................
Heze Huayi Chemical Co., Ltd.
Juancheng Kangtai Chemical Co., Ltd.
THE PEOPLE'S REPUBLIC OF CHINA: Tapered Roller 6/1/20-5/31/21
Bearings, A-570-601...........................
[[Page 41825]]
C&U Group Shanghai Bearing Co., Ltd.
Changshan Peer Bearing Co., Ltd.
GGB Bearing Technology (Suzhou) Co., Ltd.
Hangzhou C&U Automotive Bearing Co., Ltd.
Hangzhou C&U Metallurgy Bearing Co., Ltd.
Hebei Xintai Bearing Forging Co., Ltd
Huangshi C&U Bearing Co., Ltd
Shanghai Tainai Bearing Co., Ltd.
Sichuan C&U Bearing Co., Ltd.
Xinchang Newsun Xintianlong Precision
Bearing Manufacturing Co., Ltd
Zhejiang Jingli Bearing Technology Co.,
Ltd.
THE PEOPLE'S REPUBLIC OF CHINA: Wooden Cabinets 10/9/19-3/31/21
and Vanities and Components Thereof,\5\ A-570-
106...........................................
Hangzhou Hoca Kitchen & Bath Products Co.,
Ltd.
Linyi Bonn Flooring Manufacturing Co., Ltd.
TURKEY: Large Diameter Welded Pipe,\6\ A-489- 5/1/20-4/30/21
833...........................................
Borusan Mannesmann Boru Sanayi ve Ticaret
A.S.
TURKEY: Quartz Surface Products, A-489-837..... 12/13/19-5/31/21
Belenco Dis Ticaret A.S.
CVD Proceedings
INDIA: Glycine, C-533-884...................... 1/1/20-12/31/20
Avid Organics Private Limited
Indiana Chem-Port
J.R. Corporation
Kumar Industries
Mulji Mehta Enterprises
Mulji Mehta Pharma
Paras Intermediates Private Ltd.
Rexisize Rasayan Industries
Rudraa International
Studio Disrupt
INDIA: Quartz Surface Products, C-533-890...... 10/11/19-12/31/20
Antique Marbonite Pvt. Ltd.
Argil Ceramics
ARO Granite Industries Limited
Baba Super Minerals Pvt. Ltd.
Camrola Quartz Limited
Cuarzo
Divyashakti Granites Limited
Esprit Stones Pvt. Ltd.
Global Stones Pvt. Ltd.
Hi Elite Quartz LLP, India
Keros Stone LLP
Mahi Granites Pvt. Ltd.
Malbros Marbles & Granites Industries
Pacific Industries Limited
Pacific Quartz Surfaces LLP
Paradigm Stone India Pvt. Ltd.
Pelican Quartz Stone
Pokarna Engineered Stone Limited
Rocks Forever
Satya Exports
Shivam Enterprises
Southern Rocks and Minerals Pvt. Ltd
Sunex Stones Private Limited, India
Tab India Granites Private Limited, India
THE PEOPLE'S REPUBLIC OF CHINA: Glycine, C-570- 1/1/20-12/31/20
081...........................................
A.H.A. International Co., Ltd.
Aqua Bond Inc.
Baoding Mantong Fine Chemistry Co., Ltd.
Beijing Lanjian Xingda Industrial & Trade
Co., Ltd.
Elementis, Srl, Inc.
Hebei Changhao Biotechnology Co., Ltd.
Hebei Pushi Yongdao Trade Co., Ltd.
THE PEOPLE'S REPUBLIC OF CHINA: High Pressure 1/1/20-12/31/20
Steel Cylinders, C-570-978....................
Beijing Tianhai Industry Co., Ltd.
Tianjin Tianhai High Pressure Container
Co., Ltd.\7\
Langfang Tianhai High Pressure Container
Co., Ltd
THE PEOPLE'S REPUBLIC OF CHINA: Wooden Cabinets 8/12/19-12/31/20
and Vanities and Components Thereof,\8\ C-570-
107...........................................
Hangzhou Hoca Kitchen & Bath Products Co.,
Ltd.
Linyi Bonn Flooring Manufacturing Co., Ltd
TURKEY: Large Diameter Welded Pipe,\9\ C-
489-834 1/1/20-12/31/20
Borusan Mannesmann Boru Sanayi ve Ticaret
A.S.
TURKEY: Quartz Surface Products, C-489-838..... 10/11/19-12/31/20
Belenco Dis Ticaret A.S.
------------------------------------------------------------------------
[[Page 41826]]
Suspension Agreements
---------------------------------------------------------------------------
\5\The initiation notice published on June 11, 2021 (86 FR
31282) listed the names of two companies incorrectly. The names were
incorrectly listed as Hangzhou Hoco Kitchen & Bath Products Co.,
Ltd. and Linyi Bonn Flooring Manufacture Co., Ltd. However, the
correct spellings are Hangzhou Hoca Kitchen & Bath Products Co.,
Ltd. and Linyi Bonn Flooring Manufacturing Co., Ltd. as listed in
this initiation notice. See Memorandum, ``Antidumping Duty
Administrative Review of Wooden Cabinets and Vanities and Components
Thereof from the People's Republic of China; Correction to Company
Names,'' dated July 20, 2021.
\6\ In the initiation notice that published on July 6, 2021 (86
FR 35481), Commerce omitted Borusan Mannesmann Boru Sanayi ve
Ticaret A.S. (Borusan). We note that subject merchandise produced
and exported by Borusan was excluded from the order effective June
1, 2020. See Large Diameter Welded Pipe from the Republic of Turkey:
Notice of Court Decision Not in Harmony With Amended Final
Determination in the Less-Than-Fair-Value Investigation; Notice of
Amended Final Determination Pursuant to Court Decision; and Notice
of Revocation of Antidumping Duty Order, in Part, 85 FR 35262, 35264
(June 9, 2020). Commerce also stated in this notice that it would
not initiate any new reviews of Borusan's entries. Accordingly, we
are initiating this administrative review with respect to Borusan
only for subject merchandise produced in Turkey where Borusan acted
as either the manufacturer or exporter (but not both).
\7\ This company is also known as Tianjin Tianhai High Pressure
Corp., Ltd.
\8\ The initiation notice published on June 11, 2021 (86 FR
31282) listed the names of two companies incorrectly. The names were
incorrectly listed as Hangzhou Hoco Kitchen & bath Products Co.,
Ltd. and Linyi Bonn Flooring Manufacture Co., Ltd. However, the
correct spellings are Hangzhou Hoca Kitchen & Bath Products Co.,
Ltd. and Linyi Bonn Flooring Manufacturing Co., Ltd. as listed in
this initiation notice. See Husch Blackwell LLP's Letter, ``Wooden
Cabinets and Vanities from the People's Republic of China: Name
Corrections,'' dated July 23, 2021.
\9\ In the initiation notice that published on July 6, 2021 (86
FR 35481), Commerce omitted Borusan Mannesmann Boru Sanayi ve
Ticaret A.S. (Borusan). We note that subject merchandise produced
and exported by Borusan was excluded from the order. See Large
Diameter Welded Pipe From the Republic of Turkey: Countervailing
Duty Order, 84 FR 18771, 18772 (May 2, 2019). Accordingly, we are
initiating this administrative review with respect to Borusan only
for subject merchandise produced in Turkey where Borusan acted as
either the manufacturer or exporter (but not both).
---------------------------------------------------------------------------
None.
Duty Absorption Reviews
During any administrative review covering all or part of a period
falling between the first and second or third and fourth anniversary of
the publication of an AD order under 19 CFR 351.211 or a determination
under 19 CFR 351.218(f)(4) to continue an order or suspended
investigation (after sunset review), Commerce, if requested by a
domestic interested party within 30 days of the date of publication of
the notice of initiation of the review, will determine whether AD
duties have been absorbed by an exporter or producer subject to the
review if the subject merchandise is sold in the United States through
an importer that is affiliated with such exporter or producer. The
request must include the name(s) of the exporter or producer for which
the inquiry is requested.
Gap Period Liquidation
For the first administrative review of any order, there will be no
assessment of antidumping or countervailing duties on entries of
subject merchandise entered, or withdrawn from warehouse, for
consumption during the relevant ``gap'' period of the order (i.e., the
period following the expiry of provisional measures and before
definitive measures were put into place), if such a gap period is
applicable to the POR.
Administrative Protective Orders and Letters of Appearance
Interested parties must submit applications for disclosure under
administrative protective orders in accordance with the procedures
outlined in Commerce's regulations at 19 CFR 351.305. Those procedures
apply to administrative reviews included in this notice of initiation.
Parties wishing to participate in any of these administrative reviews
should ensure that they meet the requirements of these procedures
(e.g., the filing of separate letters of appearance as discussed at 19
CFR 351.103(d)).
Factual Information Requirements
Commerce's regulations identify five categories of factual
information in 19 CFR 351.102(b)(21), which are summarized as follows:
(i) Evidence submitted in response to questionnaires; (ii) evidence
submitted in support of allegations; (iii) publicly available
information to value factors under 19 CFR 351.408(c) or to measure the
adequacy of remuneration under 19 CFR 351.511(a)(2); (iv) evidence
placed on the record by Commerce; and (v) evidence other than factual
information described in (i)-(iv). These regulations require any party,
when submitting factual information, to specify under which subsection
of 19 CFR 351.102(b)(21) the information is being submitted and, if the
information is submitted to rebut, clarify, or correct factual
information already on the record, to provide an explanation
identifying the information already on the record that the factual
information seeks to rebut, clarify, or correct. The regulations, at 19
CFR 351.301, also provide specific time limits for such factual
submissions based on the type of factual information being submitted.
Please review the Final Rule,\10\ available at https://enforcement.trade.gov/frn/2013/1304frn/2013-08227.txt, prior to
submitting factual information in this segment. Note that Commerce has
temporarily modified certain of its requirements for serving documents
containing business proprietary information, until further notice.\11\
---------------------------------------------------------------------------
\10\ See Certification of Factual Information To Import
Administration During Antidumping and Countervailing Duty
Proceedings, 78 FR 42678 (July 17, 2013) (Final Rule); see also the
frequently asked questions regarding the Final Rule, available at
https://enforcement.trade.gov/tlei/notices/factual_info_final_rule_FAQ_07172013.pdf.
\11\ See Temporary Rule Modifying AD/CVD Service Requirements
Due to COVID-19, 85 FR 41363 (July 10, 2020).
---------------------------------------------------------------------------
Any party submitting factual information in an AD or CVD proceeding
must certify to the accuracy and completeness of that information using
the formats provided at the end of the Final Rule.\12\ Commerce intends
to reject factual submissions in any proceeding segments if the
submitting party does not comply with applicable certification
requirements.
---------------------------------------------------------------------------
\12\ See section 782(b) of the Act; see also Final Rule; and the
frequently asked questions regarding the Final Rule, available at
https://enforcement.trade.gov/tlei/notices/factual_info_final_rule_FAQ_07172013.pdf.
---------------------------------------------------------------------------
Extension of Time Limits Regulation
Parties may request an extension of time limits before a time limit
established under Part 351 expires, or as otherwise specified by
Commerce.\13\ In general, an extension request will be considered
untimely if it is filed after the time limit established under Part 351
expires. For submissions which are due from multiple parties
simultaneously, an extension request will be considered untimely if it
is filed after 10:00 a.m. on the due date. Examples include, but are
not limited to: (1) Case and rebuttal briefs, filed pursuant to 19 CFR
351.309; (2) factual information to value factors under 19 CFR
351.408(c), or to measure the adequacy of remuneration under 19 CFR
351.511(a)(2), filed pursuant to 19 CFR 351.301(c)(3) and rebuttal,
clarification and correction filed pursuant to 19 CFR
351.301(c)(3)(iv); (3) comments concerning the selection of a surrogate
country and surrogate values and rebuttal; (4) comments concerning CBP
data; and (5) Q&V questionnaires. Under certain circumstances, Commerce
may elect to specify a different time limit by which extension requests
will be considered untimely for submissions which are due from multiple
parties simultaneously. In such a case, Commerce will inform parties in
the letter or memorandum setting forth the
[[Page 41827]]
deadline (including a specified time) by which extension requests must
be filed to be considered timely. This policy also requires that an
extension request must be made in a separate, stand-alone submission,
and clarifies the circumstances under which Commerce will grant
untimely-filed requests for the extension of time limits. Please review
the Final Rule, available at https://www.gpo.gov/fdsys/pkg/FR-2013-09-20/html/2013-22853.htm, prior to submitting factual information in
these segments.
---------------------------------------------------------------------------
\13\ See 19 CFR 351.302.
---------------------------------------------------------------------------
These initiations and this notice are in accordance with section
751(a) of the Act (19 U.S.C. 1675(a)) and 19 CFR 351.221(c)(1)(i).
Dated: July 29, 2021.
James Maeder,
Deputy Assistant Secretary for Antidumping and Countervailing Duty
Operations.
[FR Doc. 2021-16497 Filed 8-2-21; 8:45 am]
BILLING CODE 3510-DS-P