Certain Cold-Drawn Mechanical Tubing of Carbon and Alloy Steel From Italy: Final Results of Antidumping Duty Administrative Review; 2017-2019, 22390-22392 [2021-08793]
Download as PDF
<![CDATA[
22390
Federal Register / Vol. 86, No. 80 / Wednesday, April 28, 2021 / Notices
serve basis. To join the conference,
submit inquiries to Ms. Yvette Springer
at Yvette.Springer@bis.doc.gov, no later
than May 6, 2021.
To the extent time permits, members
of the public may present oral
statements to the Committee. Written
statements may be submitted at any
time before or after the meeting.
However, to facilitate distribution of
public presentation materials to
Committee members, the materials
should be forwarded prior to the
meeting to Ms. Springer via email.
The Assistant Secretary for
Administration, with the concurrence of
the delegate of the General Counsel,
formally determined on February 9,
2021, pursuant to Section 10(d) of the
Federal Advisory Committee Act, as
amended (5 U.S.C. app. 2 § 10(d)), that
the portion of the meeting dealing with
pre-decisional changes to the Commerce
Control List and the U.S. export control
policies shall be exempt from the
provisions relating to public meetings
found in 5 U.S.C. app. 2 § § 10(a)(1) and
10(a)(3). The remaining portions of the
meeting will be open to the public.
For more information, call Yvette
Springer at (202) 482–2813.
Yvette Springer,
Committee Liaison Officer.
[FR Doc. 2021–08816 Filed 4–27–21; 8:45 am]
BILLING CODE 3510–JT–P
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
Technical Advisory Committees;
Notice of Recruitment of Members
The Bureau of Industry and
Security (BIS), Department of Commerce
is announcing its recruitment of
candidates to serve on one of its seven
Technical Advisory Committees
(‘‘TACs’’ or ‘‘Committees’’). TAC
members advise the Department of
Commerce on the technical parameters
for export controls applicable to dualuse items (commodities, software, and
technology) and on the administration
of those controls. The TACs are
composed of representatives from
industry, academia, and the U.S.
Government and reflect diverse points
of view on the concerns of the exporting
community. Industry representatives are
selected from firms producing a broad
range of items currently controlled for
national security, non-proliferation,
foreign policy, and short supply reasons
or that are proposed for such controls.
Representation from the private sector is
balanced to the extent possible among
large and small firms.
jbell on DSKJLSW7X2PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
19:17 Apr 27, 2021
Jkt 253001
Six TACs are responsible for advising
the Department of Commerce on the
technical parameters for export controls
and the administration of those controls
within specified areas: Information
Systems TAC: Control List Categories 3
(electronics), 4 (computers), and 5
(telecommunications and information
security); Materials TAC: Control List
Category 1 (materials, chemicals,
microorganisms, and toxins); Materials
Processing Equipment TAC: Control List
Category 2 (materials processing);
Sensors and Instrumentation TAC:
Control List Category 6 (sensors and
lasers); Transportation and Related
Equipment TAC: Control List Categories
7 (navigation and avionics), 8 (marine),
and 9 (propulsion systems, space
vehicles, and related equipment); and
the Emerging Technology TAC
(identification of emerging and
foundational technologies that may be
developed over a period of five to ten
years with potential dual-use
applications). The seventh TAC, the
Regulations and Procedures TAC,
focuses on the Export Administration
Regulations (EAR) and procedures for
implementing the EAR.
TAC members are appointed by the
Secretary of Commerce and serve terms
of not more than four consecutive years.
TAC members must obtain secret-level
clearances prior to their appointment.
These clearances are necessary so that
members may be permitted access to
classified information that may be
needed to formulate recommendations
to the Department of Commerce.
Applicants are strongly encouraged to
review materials and information on
each Committee website, including the
Committee’s charter, to gain an
understanding of each Committee’s
responsibilities, matters on which the
Committee will provide
recommendations, and expectations for
members. Members of any of the seven
TACs may not be registered as foreign
agents under the Foreign Agents
Registration Act. No TAC member may
represent a company that is majority
owned or controlled by a foreign
government entity (or foreign
government entities). TAC members will
not be compensated for their services or
reimbursed for their travel expenses.
If you are interested in becoming a
TAC member, please provide the
following information: 1. Name of
applicant; 2. affirmation of U.S.
citizenship; 3. organizational affiliation
and title, as appropriate; 4. mailing
address; 5. work telephone number; 6.
email address; 7. summary of
qualifications for membership; 8. an
affirmative statement that the candidate
will be able to meet the expected
PO 00000
Frm 00007
Fmt 4703
Sfmt 4703
commitments of Committee work.
Committee work includes: (a) Attending
in-person/teleconference Committee
meetings roughly four times per year
(lasting 1–2 days each); (b) undertaking
additional work outside of full
Committee meetings including
subcommittee conference calls or
meetings as needed, and (c) frequently
drafting, preparing or commenting on
proposed recommendations to be
evaluated at Committee meetings.
Finally, candidates must provide an
affirmative statement that they meet all
Committee eligibility requirements.
The Department of Commerce is
committed to equal opportunity in the
workplace and seeks diverse Advisory
Committee membership.
To respond to this recruitment notice,
please send a copy of your resume to
Ms. Yvette Springer at Yvette.Springer@
bis.doc.gov, by September 30, 2021.
FOR FURTHER INFORMATION CONTACT:
Ms.
Yvette Springer on (202) 482–2813.
Yvette Springer,
Committee Liaison Officer.
[FR Doc. 2021–08818 Filed 4–27–21; 8:45 am]
BILLING CODE 3510–JT–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–475–838]
Certain Cold-Drawn Mechanical Tubing
of Carbon and Alloy Steel From Italy:
Final Results of Antidumping Duty
Administrative Review; 2017–2019
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce
(Commerce) determines that certain
cold-drawn mechanical tubing of carbon
and alloy steel (cold-drawn mechanical
tubing) from Italy was sold in the
United States at less than normal value
during the period of review (POR)
November 22, 2017, through May 31,
2019.
AGENCY:
DATES:
Applicable April 28, 2021.
FOR FURTHER INFORMATION CONTACT:
Robert Scully, AD/CVD Operations,
Office V, Enforcement and Compliance,
International Trade Administration,
U.S. Department of Commerce, 1401
Constitution Avenue NW, Washington
DC 20230; telephone: (202) 482–0572.
SUPPLEMENTARY INFORMATION:
E:\FR\FM\28APN1.SGM
28APN1
Federal Register / Vol. 86, No. 80 / Wednesday, April 28, 2021 / Notices
Background
On October 23, 2020, Commerce
published the Preliminary Results.1
Commerce extended the deadline for the
final results by 60 days on January 13,
2021.2 The deadline for the final results
of this review is now April 21, 2021. For
a complete description of the events that
occurred since the Preliminary Results,
see the Issues and Decision
Memorandum.3
margin exists for the period November
22, 2017, through May 31, 2019:
Exporter/producer
Dalmine S.p.A .............................
Weightedaverage
dumping
margin
(percent)
10.99
jbell on DSKJLSW7X2PROD with NOTICES
Assessment Rate
Pursuant to section 751(a)(2)(A) of the
Scope of the Order
Tariff Act of 1930, as amended (the Act),
and 19 CFR 351.212(b)(1), Commerce
The products covered by this order
shall determine, and U.S. Customs and
are certain cold-drawn mechanical
Border Protection (CBP) shall assess,
tubing of carbon and alloy steel
antidumping duties on all appropriate
products from Italy. For a full
entries covered by this review.
description of the scope, see the Issues
Because Dalmine’s weighted-average
and Decision Memorandum.
dumping margin is not zero or de
Analysis of Comments Received
minimis (i.e., less than 0.5 percent),
Commerce has calculated importerAll issues raised in the case and
specific antidumping duty assessment
rebuttal briefs are addressed in the
rates. We calculated importer-specific
Issues and Decision Memorandum. A
antidumping duty assessment rates by
list of the issues that parties raised and
aggregating the total amount of dumping
to which we responded in the Issues
calculated for the examined sales of
and Decision Memorandum is attached
each importer and dividing each of
to this notice as an Appendix. The
these amounts by the total sales value
Issues and Decision Memorandum is a
associated with those sales. Where
public document and is on file
either the respondent’s weightedelectronically via Enforcement and
average dumping margin is zero or de
Compliance’s Antidumping and
minimis within the meaning of 19 CFR
Countervailing Duty Centralized
351.106(c)(1), or an importer-specific
Electronic Service System (ACCESS).
assessment rate is zero or de minimis,
ACCESS is available to registered users
we will instruct CBP to liquidate the
at https://access.trade.gov. In addition, a
appropriate entries without regard to
complete version of the Issues and
antidumping duties.
Decision Memorandum can be accessed
For entries of subject merchandise
directly at https://enforcement.trade.gov/ during the POR produced by Dalmine
frn//.
for which it did not know its
merchandise was destined for the
Changes Since the Preliminary Results
United States, we will instruct CBP to
Based on a review of the record and
liquidate unreviewed entries at the allcomments received from interested
others rate if there is no rate for the
parties, we made changes to the
intermediate company(ies) involved in
programming language to correct two
the transaction.5
errors.4
We intend to instruct CBP to take into
account the ‘‘provisional measures
Final Results of the Review
deposit cap,’’ in accordance with 19
Commerce determines that the
CFR 351.212(d).
following weighted-average dumping
Consistent with its recent notice,6
Commerce intends to issue assessment
1 See Certain Cold-Drawn Mechanical Tubing of
instructions to CBP no earlier than 35
Carbon and Alloy Steel from Italy: Preliminary
days after the date of publication of the
Results of the Administrative Review of the
final results of this review in the
Antidumping Duty Order; 2017–2019, 85 FR 67509
(October 23, 2020) (Preliminary Results), and
Federal Register. If a timely summons is
accompanying Preliminary Decision Memorandum.
filed at the U.S. Court of International
2 See Memorandum, ‘‘Cold-Drawn Mechanical
Trade, the assessment instructions will
Tubing of Carbon and Alloy Steel from Italy:
direct CBP not to liquidate relevant
Extension of Deadline for Final Results of
Antidumping Duty Administrative Review, 2017–
2019,’’ dated January 13, 2021.
3 See Memorandum, ‘‘Issues and Decision
Memorandum for the Final Results of the 2017–
2019 Administrative Review of the Antidumping
Duty Order on Certain Cold-Drawn Mechanical
Tubing of Carbon and Alloy Steel from Italy,’’ dated
concurrently with, and hereby adopted by, this
notice (Issues and Decision Memorandum).
4 Id. at Comments 3 and 4.
VerDate Sep<11>2014
19:17 Apr 27, 2021
Jkt 253001
5 For a full discussion of this practice, see
Antidumping and Countervailing Duty Proceedings:
Assessment of Antidumping Duties, 68 FR 23954
(May 6, 2003).
6 See Notice of Discontinuation of Policy to Issue
Liquidation Instructions After 15 Days in
Applicable Antidumping and Countervailing Duty
Administrative Proceedings, 86 FR 3995 (January
15, 2021).
PO 00000
Frm 00008
Fmt 4703
Sfmt 4703
22391
entries until the time for parties to file
a request for a statutory injunction has
expired (i.e., within 90 days of
publication).
Cash Deposit Requirements
The following cash deposit
requirements will be effective for all
shipments of the subject merchandise
entered, or withdrawn from warehouse,
for consumption on or after the
publication date of the final results of
this administrative review, as provided
by section 751(a)(2)(C) of the Act: (1)
The cash deposit rate for Dalmine will
be the rate established in the final
results of this administrative review; (2)
for merchandise exported by producers
or exporters not covered in this
administrative review but covered in a
prior segment of the proceeding, the
cash deposit rate will continue to be the
company-specific rate published for the
most recently completed segment of this
proceeding; (3) if the exporter is not a
firm covered in this review or the
original less-than-fair-value (LTFV)
investigation, but the producer is, the
cash deposit rate will be the rate
established for the most recentlycompleted segment of this proceeding
for the producer of the subject
merchandise; and (4) the cash deposit
rate for all other producers or exporters
will continue to be 47.87 percent,7 the
all-others rate established in the LTFV
investigation. These cash deposit
requirements, when imposed, shall
remain in effect until further notice.
Notification to Importers
This notice serves as a final reminder
to importers of their responsibility
under 19 CFR 351.402(f)(2) to file a
certificate regarding the reimbursement
of antidumping duties prior to
liquidation of the relevant entries
during this POR. Failure to comply with
this requirement could result in
Commerce’s presumption that
reimbursement of antidumping duties
has occurred and the subsequent
assessment of double antidumping
duties.
Administrative Protective Order
This notice also serves as a final
reminder to parties subject to
administrative protective order (APO) of
their responsibility concerning the
return or destruction of proprietary
7 See Certain Cold-Drawn Mechanical Tubing of
Carbon and Alloy Steel from the People’s Republic
of China, the Federal Republic of Germany, India,
Italy, The Republic of Korea, and Switzerland:
Antidumping Duty Orders; and Amended Final
Determinations of Sales at Less Than Fair Value for
the People’s Republic of China and Switzerland, 83
FR 26962 (June 11, 2018).
E:\FR\FM\28APN1.SGM
28APN1
22392
Federal Register / Vol. 86, No. 80 / Wednesday, April 28, 2021 / Notices
information disclosed under APO in
accordance with 19 CFR 351.305(a)(3),
which continues to govern business
proprietary information in this segment
of the proceeding. Timely written
notification of the return/destruction of
APO materials, or conversion to judicial
protective order, is hereby requested.
Failure to comply with the regulations
and the terms of an APO is a
sanctionable violation.
Notification to Interested Parties
We are issuing and publishing this
notice in accordance with sections
751(a)(1) and 777(i)(1) of the Act, and 19
CFR 351.221(b)(5) and 19 CFR
351.213(h)(1).
Dated: April 21, 2021.
Christian Marsh,
Acting Assistant Secretary for Enforcement
and Compliance.
Appendix
List of Topics Discussed in the Issues and
Decision Memorandum
I. Summary
II. Background
III. Scope of the Order
IV. Changes Since the Preliminary Results
V. Discussion of the Issues
Comment 1: Dalmine’s Cutting Costs
Comment 2: Major Input Adjustment for
Hollows
Comment 3: Correct Level of Trade (LOT)
Variables
Comment 4: Ministerial Error Regarding
Inventory Carrying Costs
VI. Recommendation
[FR Doc. 2021–08793 Filed 4–27–21; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
National Oceanic and Atmospheric
Administration
[RTID 0648–XB043]
Takes of Marine Mammals Incidental to
Specified Activities; Taking Marine
Mammals Incidental to the Old Sitka
Dock North Dolphins Expansion
Project in Sitka, Alaska
National Marine Fisheries
Service (NMFS), National Oceanic and
Atmospheric Administration (NOAA),
Commerce.
ACTION: Notice; issuance of an incidental
harassment authorization.
AGENCY:
In accordance with the
regulations implementing the Marine
Mammal Protection Act (MMPA) as
amended, notification is hereby given
that NMFS has issued an incidental
harassment authorization (IHA) to
Halibut Point Marine Services, LLC
(HPMS) to incidentally harass, by Level
jbell on DSKJLSW7X2PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
19:17 Apr 27, 2021
Jkt 253001
A and Level B harassment only, marine
mammals during construction activities
associated with the Old Sitka Dock
North Dolphins Expansion Project in
Sitka, Alaska.
DATES: This Authorization is valid from
April 15, 2021 through April 14, 2022.
FOR FURTHER INFORMATION CONTACT:
Dwayne Meadows, Ph.D., Office of
Protected Resources, NMFS, (301) 427–
8401. Electronic copies of the original
application, request for a new IHA, and
supporting documents (including NMFS
Federal Register notices of the original
proposed and final authorizations, and
the previous IHA), as well as a list of the
references cited in this document, may
be obtained online at: https://
www.fisheries.noaa.gov/permit/
incidental-take-authorizations-undermarine-mammal-protection-act. In case
of problems accessing these documents,
please call the contact listed above.
SUPPLEMENTARY INFORMATION:
Background
The MMPA prohibits the ‘‘take’’ of
marine mammals, with certain
exceptions. Sections 101(a)(5)(A) and
(D) of the MMPA (16 U.S.C. 1361 et
seq.) direct the Secretary of Commerce
(as delegated to NMFS) to allow, upon
request, the incidental, but not
intentional, taking of small numbers of
marine mammals by U.S. citizens who
engage in a specified activity (other than
commercial fishing) within a specified
geographical region if certain findings
are made and either regulations are
issued or, if the taking is limited to
harassment, a notice of a proposed
incidental take authorization is
provided to the public for review.
Authorization for incidental takings
shall be granted if NMFS finds that the
taking will have a negligible impact on
the species or stock(s) and will not have
an unmitigable adverse impact on the
availability of the species or stock(s) for
taking for subsistence uses (where
relevant). Further, NMFS must prescribe
the permissible methods of taking and
other ‘‘means of effecting the least
practicable adverse impact’’ on the
affected species or stocks and their
habitat, paying particular attention to
rookeries, mating grounds, and areas of
similar significance, and on the
availability of such species or stocks for
taking for certain subsistence uses
(referred to here as ‘‘mitigation
measures’’). Monitoring and reporting of
such takings are also required. The
meaning of key terms such as ‘‘take,’’
‘‘harassment,’’ and ‘‘negligible impact’’
can be found in section 3 of the MMPA
(16 U.S.C. 1362) and the agency’s
regulations at 50 CFR 216.103.
PO 00000
Frm 00009
Fmt 4703
Sfmt 4703
History of Request
On July 30, 2019, NMFS received a
request from HPMS for an IHA to take
marine mammals incidental to dock
expansion activities. On April 8, 2020,
NMFS issued an IHA to HPMS to take
marine mammals incidental to the Old
Sitka Dock North Dolphins Expansion
Project in Sitka, Alaska (85 FR 21399,
April 17, 2020), effective from October
1, 2020 through February 28, 2021. On
February 3, 2021, NMFS received an
application to complete the remaining
work from the 2020 IHA. The
application was deemed adequate and
complete on February 21, 2021. As
described in the application for the new
IHA, the activities for which incidental
take is requested were covered by the
2020 authorization but will not be
completed prior to its expiration. HPMS
requested the new IHA be effective from
April 15, 2021 through April 14, 2022.
We proposed to issue an IHA on March
18, 2021 (86 FR 14727).
Description of the Specified Activities
and Anticipated Impacts
As described in the 2020 IHA, HPMS
is adding two additional dolphin
structures and strengthening two
existing dolphin structures at their
deep-water dock facility in Sitka Sound.
Construction at the dock facility
includes vibratory pile installation (and
small impact if necessary) and vibratory
removal of eight temporary, 30-inch
template pile structures, vibratory and
impact installation of 10 48-inch
permanent piles comprising the
dolphins, and down-the-hole drilling to
install eight bedrock anchors for the
permanent piles of the dolphins. The
only remaining work for this IHA is
constructing one new dolphin (i.e., four
30-inch template piles and four 48-inch
piles). The remaining work consists of 9
days of in-water work.
Vibratory pile removal and
installation, impact pile installation,
and drilling activity will introduce
underwater sounds that may result in
take, by Level A and Level B
harassment, of seven species (Level A
harassment is authorized for only two of
the seven species) of marine mammals
in Sitka Sound. As of February 21, 2021
the project has recorded small Level B
harassment takes of three species. This
IHA authorizes the remaining take
associated with the work not completed
under the 2020 IHA. A detailed
description of the planned project is
provided in the Federal Register notice
for the proposed IHA (86 FR 14727;
March 18, 2021). Since that time, no
changes have been made to the planned
activities. Therefore, a detailed
E:\FR\FM\28APN1.SGM
28APN1
]]>Agencies
[Federal Register Volume 86, Number 80 (Wednesday, April 28, 2021)]
[Notices]
[Pages 22390-22392]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-08793]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
[A-475-838]
Certain Cold-Drawn Mechanical Tubing of Carbon and Alloy Steel
From Italy: Final Results of Antidumping Duty Administrative Review;
2017-2019
AGENCY: Enforcement and Compliance, International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce (Commerce) determines that certain
cold-drawn mechanical tubing of carbon and alloy steel (cold-drawn
mechanical tubing) from Italy was sold in the United States at less
than normal value during the period of review (POR) November 22, 2017,
through May 31, 2019.
DATES: Applicable April 28, 2021.
FOR FURTHER INFORMATION CONTACT: Robert Scully, AD/CVD Operations,
Office V, Enforcement and Compliance, International Trade
Administration, U.S. Department of Commerce, 1401 Constitution Avenue
NW, Washington DC 20230; telephone: (202) 482-0572.
SUPPLEMENTARY INFORMATION:
[[Page 22391]]
Background
On October 23, 2020, Commerce published the Preliminary Results.\1\
Commerce extended the deadline for the final results by 60 days on
January 13, 2021.\2\ The deadline for the final results of this review
is now April 21, 2021. For a complete description of the events that
occurred since the Preliminary Results, see the Issues and Decision
Memorandum.\3\
---------------------------------------------------------------------------
\1\ See Certain Cold-Drawn Mechanical Tubing of Carbon and Alloy
Steel from Italy: Preliminary Results of the Administrative Review
of the Antidumping Duty Order; 2017-2019, 85 FR 67509 (October 23,
2020) (Preliminary Results), and accompanying Preliminary Decision
Memorandum.
\2\ See Memorandum, ``Cold-Drawn Mechanical Tubing of Carbon and
Alloy Steel from Italy: Extension of Deadline for Final Results of
Antidumping Duty Administrative Review, 2017-2019,'' dated January
13, 2021.
\3\ See Memorandum, ``Issues and Decision Memorandum for the
Final Results of the 2017-2019 Administrative Review of the
Antidumping Duty Order on Certain Cold-Drawn Mechanical Tubing of
Carbon and Alloy Steel from Italy,'' dated concurrently with, and
hereby adopted by, this notice (Issues and Decision Memorandum).
---------------------------------------------------------------------------
Scope of the Order
The products covered by this order are certain cold-drawn
mechanical tubing of carbon and alloy steel products from Italy. For a
full description of the scope, see the Issues and Decision Memorandum.
Analysis of Comments Received
All issues raised in the case and rebuttal briefs are addressed in
the Issues and Decision Memorandum. A list of the issues that parties
raised and to which we responded in the Issues and Decision Memorandum
is attached to this notice as an Appendix. The Issues and Decision
Memorandum is a public document and is on file electronically via
Enforcement and Compliance's Antidumping and Countervailing Duty
Centralized Electronic Service System (ACCESS). ACCESS is available to
registered users at https://access.trade.gov. In addition, a complete
version of the Issues and Decision Memorandum can be accessed directly
at https://enforcement.trade.gov/frn//.
Changes Since the Preliminary Results
Based on a review of the record and comments received from
interested parties, we made changes to the programming language to
correct two errors.\4\
---------------------------------------------------------------------------
\4\ Id. at Comments 3 and 4.
---------------------------------------------------------------------------
Final Results of the Review
Commerce determines that the following weighted-average dumping
margin exists for the period November 22, 2017, through May 31, 2019:
------------------------------------------------------------------------
Weighted-
average
Exporter/producer dumping
margin
(percent)
------------------------------------------------------------------------
Dalmine S.p.A............................................... 10.99
------------------------------------------------------------------------
Assessment Rate
Pursuant to section 751(a)(2)(A) of the Tariff Act of 1930, as
amended (the Act), and 19 CFR 351.212(b)(1), Commerce shall determine,
and U.S. Customs and Border Protection (CBP) shall assess, antidumping
duties on all appropriate entries covered by this review.
Because Dalmine's weighted-average dumping margin is not zero or de
minimis (i.e., less than 0.5 percent), Commerce has calculated
importer-specific antidumping duty assessment rates. We calculated
importer-specific antidumping duty assessment rates by aggregating the
total amount of dumping calculated for the examined sales of each
importer and dividing each of these amounts by the total sales value
associated with those sales. Where either the respondent's weighted-
average dumping margin is zero or de minimis within the meaning of 19
CFR 351.106(c)(1), or an importer-specific assessment rate is zero or
de minimis, we will instruct CBP to liquidate the appropriate entries
without regard to antidumping duties.
For entries of subject merchandise during the POR produced by
Dalmine for which it did not know its merchandise was destined for the
United States, we will instruct CBP to liquidate unreviewed entries at
the all-others rate if there is no rate for the intermediate
company(ies) involved in the transaction.\5\
---------------------------------------------------------------------------
\5\ For a full discussion of this practice, see Antidumping and
Countervailing Duty Proceedings: Assessment of Antidumping Duties,
68 FR 23954 (May 6, 2003).
---------------------------------------------------------------------------
We intend to instruct CBP to take into account the ``provisional
measures deposit cap,'' in accordance with 19 CFR 351.212(d).
Consistent with its recent notice,\6\ Commerce intends to issue
assessment instructions to CBP no earlier than 35 days after the date
of publication of the final results of this review in the Federal
Register. If a timely summons is filed at the U.S. Court of
International Trade, the assessment instructions will direct CBP not to
liquidate relevant entries until the time for parties to file a request
for a statutory injunction has expired (i.e., within 90 days of
publication).
---------------------------------------------------------------------------
\6\ See Notice of Discontinuation of Policy to Issue Liquidation
Instructions After 15 Days in Applicable Antidumping and
Countervailing Duty Administrative Proceedings, 86 FR 3995 (January
15, 2021).
---------------------------------------------------------------------------
Cash Deposit Requirements
The following cash deposit requirements will be effective for all
shipments of the subject merchandise entered, or withdrawn from
warehouse, for consumption on or after the publication date of the
final results of this administrative review, as provided by section
751(a)(2)(C) of the Act: (1) The cash deposit rate for Dalmine will be
the rate established in the final results of this administrative
review; (2) for merchandise exported by producers or exporters not
covered in this administrative review but covered in a prior segment of
the proceeding, the cash deposit rate will continue to be the company-
specific rate published for the most recently completed segment of this
proceeding; (3) if the exporter is not a firm covered in this review or
the original less-than-fair-value (LTFV) investigation, but the
producer is, the cash deposit rate will be the rate established for the
most recently-completed segment of this proceeding for the producer of
the subject merchandise; and (4) the cash deposit rate for all other
producers or exporters will continue to be 47.87 percent,\7\ the all-
others rate established in the LTFV investigation. These cash deposit
requirements, when imposed, shall remain in effect until further
notice.
---------------------------------------------------------------------------
\7\ See Certain Cold-Drawn Mechanical Tubing of Carbon and Alloy
Steel from the People's Republic of China, the Federal Republic of
Germany, India, Italy, The Republic of Korea, and Switzerland:
Antidumping Duty Orders; and Amended Final Determinations of Sales
at Less Than Fair Value for the People's Republic of China and
Switzerland, 83 FR 26962 (June 11, 2018).
---------------------------------------------------------------------------
Notification to Importers
This notice serves as a final reminder to importers of their
responsibility under 19 CFR 351.402(f)(2) to file a certificate
regarding the reimbursement of antidumping duties prior to liquidation
of the relevant entries during this POR. Failure to comply with this
requirement could result in Commerce's presumption that reimbursement
of antidumping duties has occurred and the subsequent assessment of
double antidumping duties.
Administrative Protective Order
This notice also serves as a final reminder to parties subject to
administrative protective order (APO) of their responsibility
concerning the return or destruction of proprietary
[[Page 22392]]
information disclosed under APO in accordance with 19 CFR
351.305(a)(3), which continues to govern business proprietary
information in this segment of the proceeding. Timely written
notification of the return/destruction of APO materials, or conversion
to judicial protective order, is hereby requested. Failure to comply
with the regulations and the terms of an APO is a sanctionable
violation.
Notification to Interested Parties
We are issuing and publishing this notice in accordance with
sections 751(a)(1) and 777(i)(1) of the Act, and 19 CFR 351.221(b)(5)
and 19 CFR 351.213(h)(1).
Dated: April 21, 2021.
Christian Marsh,
Acting Assistant Secretary for Enforcement and Compliance.
Appendix
List of Topics Discussed in the Issues and Decision Memorandum
I. Summary
II. Background
III. Scope of the Order
IV. Changes Since the Preliminary Results
V. Discussion of the Issues
Comment 1: Dalmine's Cutting Costs
Comment 2: Major Input Adjustment for Hollows
Comment 3: Correct Level of Trade (LOT) Variables
Comment 4: Ministerial Error Regarding Inventory Carrying Costs
VI. Recommendation
[FR Doc. 2021-08793 Filed 4-27-21; 8:45 am]
BILLING CODE 3510-DS-P
