Servicing Multi-Piece and Single Piece Rim Wheels; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements, 17410-17411 [2021-06797]

Download as PDF 17410 Federal Register / Vol. 86, No. 62 / Friday, April 2, 2021 / Notices some information (e.g., copyrighted material) is not publicly available to read or download from this website. All submissions, including copyrighted material, are available for inspection and copying at the OSHA Docket Office. Information on using the http://www.regulations.gov website to submit comments and access the docket is available at the website’s ‘‘User Tips’’ link. Contact the OSHA Docket Office at (202) 693–2350, (TTY (877) 889–5627) for information about materials not available from the website, and for assistance in using the internet to locate docket submissions. V. Authority and Signature James S. Frederick, Principal Deputy Assistant Secretary of Labor for Occupational Safety and Health, directed the preparation of this notice. The authority for this notice is the Paperwork Reduction Act of 1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor’s Order No. 1–2012 (77 FR 3912). Signed at Washington, DC, on March 25, 2021. James S. Frederick, Principal Deputy Assistant Secretary of Labor for Occupational Safety and Health. [FR Doc. 2021–06796 Filed 4–1–21; 8:45 am] BILLING CODE 4510–26–P DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA–2011–0189] Servicing Multi-Piece and Single Piece Rim Wheels; Extension of the Office of Management and Budget’s (OMB) Approval of Information Collection (Paperwork) Requirements Occupational Safety and Health Administration (OSHA), Labor. ACTION: Request for public comments. AGENCY: OSHA solicits public comments concerning the proposal to extend the Office of Management and Budget’s (OMB) approval of the information collection requirements specified in the Standard on Servicing Multi-Piece and Single Piece Rim Wheels. The paperwork provisions of the Standard includes a requirement that the manufacturer or a Registered Professional Engineer certify that repaired restraining devices and barriers meet the strength requirements specified in the Standard and a requirement that defective wheels and wheel components be marked or tagged. jbell on DSKJLSW7X2PROD with NOTICES SUMMARY: VerDate Sep<11>2014 23:04 Apr 01, 2021 Jkt 253001 Comments must be submitted (postmarked, sent, or received) by June 1, 2021. ADDRESSES: Electronically: You may submit comments, including attachments, electronically at http:// www.regulations.gov, the Federal eRulemaking Portal. Follow the instructions online for submitting comments. Docket: To read or download comments or other material in the docket, go to http:// www.regulations.gov. Documents in the docket are listed in the http:// www.regulations.gov index; however, some information (e.g., copyrighted material) is not publicly available to read or download through the website. All submissions, including copyrighted material, are available for inspection through the OSHA Docket Office. Contact the OSHA Docket Office for assistance in locating docket submissions. Instructions: All submissions must include the agency name and the OSHA docket number for this Federal Register notice (OSHA–2011–0189). OSHA will place comments and requests to speak, including personal information, in the public docket, which may be available online. Therefore, OSHA cautions interested parties about submitting personal information such as Social Security numbers and birthdates. For further information on submitting comments, see the ‘‘Public Participation’’ heading in the section of this notice titled SUPPLEMENTARY INFORMATION. FOR FURTHER INFORMATION CONTACT: Theda Kenney or Seleda Perryman, Directorate of Standards and Guidance, OSHA, U.S. Department of Labor; telephone (202) 693–2222. SUPPLEMENTARY INFORMATION: DATES: I. Background The Department of Labor, as part of the continuing effort to reduce paperwork and respondent (i.e., employer) burden, conducts a preclearance consultation program to provide the public with an opportunity to comment on proposed and continuing information collection requirements in accordance with the Paperwork Reduction Act of 1995 (PRA) (44 U.S.C. 3506(c)(2)(A)). This program ensures that information is in the desired format, reporting burden (time and costs) is minimal, collection instruments are clearly understood, and OSHA’s estimate of the information collection burden is accurate. The Occupational Safety and Health Act of PO 00000 Frm 00062 Fmt 4703 Sfmt 4703 1970 (OSH Act) (29 U.S.C. 651 et seq.) authorizes information collection by employers as necessary or appropriate for enforcement of the OSH Act or for developing information regarding the causes and prevention of occupational injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also requires that OSHA obtain such information with minimum burden upon employers, especially those operating small businesses, and to reduce to the maximum extent feasible unnecessary duplication of efforts in obtaining information (29 U.S.C. 657). Certification of repair (§ 1910.177(d)(3)(iv)). This paragraph requires that when restraining devices and barriers are removed from service because they are defective, they shall not be returned to service until they are repaired and reinspected. If the repair is structural, the manufacturer or a Registered Professional Engineer must certify that the strength requirements specified in § 1910.177(d)(3)(i) of the Standard have been met. The certification records are used to assure that equipment has been properly repaired. The certification records also provide the most efficient means for OSHA compliance officers to determine that an employer is complying with the Standard. Marking or tagging of wheel components (§ 1910.177(e)(2)). This paragraph requires that defective wheels and wheel components ‘‘be marked or tagged unserviceable and removed from the service area.’’ Under this requirement, OSHA is providing employers with sufficient information from which they can derive the wording to use in marking the object or constructing a tag. Therefore, this provision imposes no paperwork burden because it falls within the portion of 5 CFR 1320(c)(2) that states, ‘‘The public disclosure of information originally supplied by the Federal government to the recipient for the purpose of disclosure to the public is not included within this definition [of ‘collection of information’]’’. II. Special Issues for Comment OSHA has a particular interest in comments on the following issues: • Whether the proposed information collection requirements are necessary for the proper performance of the agency’s functions, including whether the information is useful; • The accuracy of OSHA’s estimate of the burden (time and costs) of the information collection requirements, including the validity of the methodology and assumptions used; E:\FR\FM\02APN1.SGM 02APN1 Federal Register / Vol. 86, No. 62 / Friday, April 2, 2021 / Notices • The quality, utility, and clarity of the information collected; and • Ways to minimize the burden on employers who must comply; for example, by using automated or other technological information collection and transmission techniques. jbell on DSKJLSW7X2PROD with NOTICES III. Proposed Actions OSHA is requesting that OMB extend the approval of the information collection requirements contained in the Standard on Servicing Multi-Piece and Single Piece Rim Wheels (29 CFR 1910.177). OSHA is proposing to retain the current burden hour estimate of one (1) hour. The agency will summarize the comments submitted in response to this notice and will include this summary in the request to OMB. Type of Review: Extension of a currently approved collection. Title: Servicing Multi-Piece and Single Piece Rim Wheels (29 CFR 1910.177). OMB Control Number: 1218–0219. Affected Public: Business or other forprofits. Number of Respondents: 85. Frequency of Responses: On occasion. Average Time per Response: Various. Estimated Total Burden Hours: 1. Estimated Cost (Operation and Maintenance): $0. IV. Public Participation—Submission of Comments on This Notice and Internet Access to Comments and Submissions You may submit comments in response to this document as follows: (1) Electronically at http:// regulations.gov, which is the Federal eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All comments, attachments, and other materials must identify the agency name and the OSHA docket number for the ICR (Docket No. OSHA–2011–0189). Please note: While OSHA’s Docket Office is continuing to accept and process submissions by regular mail, due to the COVID–19 pandemic, the Docket Office is closed to the public and not able to receive submissions to the docket by hand, express mail, messenger, and courier service. All comments, attachments, and other material must identify the agency name and the OSHA docket number for the ICR (Docket No. OSHA–2011–0189). You may supplement electronic submissions by uploading document files electronically. If you wish to mail additional materials in reference to an electronic or facsimile submission, you must submit them to the OSHA Docket Office (see the section of this notice titled ADDRESSES). The additional materials must clearly identify your electronic comments by your name, VerDate Sep<11>2014 23:04 Apr 01, 2021 Jkt 253001 date, and the docket number so the agency can attach them to your comments. Due to security procedures, the use of regular mail may cause a significant delay in the receipt of comments. Comments and submissions are posted without change at http:// www.regulations.gov. Therefore, OSHA cautions comments about submitting personal information such as social security numbers and dates of birth. Although all submissions are listed in the http://www.regulations.gov index, some information (e.g., copyrighted material) is not publicly available to read or download through this website. All submissions, including copyrighted material, are available for inspection and copying at the OSHA Docket Office. Information on using the http:// www.regulations.gov website to submit comments and access the docket is available at the website’s ‘‘User Tips’’ link. Contact the OSHA Docket Office at (202) 693–2350, (TTY (877) 889–5627) for information about materials not available through the website, and for assistance in using the internet to locate docket submissions. V. Authority and Signature James S. Frederick, Principal Deputy Assistant Secretary of Labor for Occupational Safety and Health, directed the preparation of this notice. The authority for this notice is the Paperwork Reduction Act of 1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor’s Order No. 1–2012 (77 FR 3912). Signed at Washington, DC, on March 25, 2021. James S. Frederick, Principal Deputy Assistant Secretary of Labor for Occupational Safety and Health. [FR Doc. 2021–06797 Filed 4–1–21; 8:45 am] BILLING CODE 4510–26–P DEPARTMENT OF LABOR Office of Workers’ Compensation Programs Advisory Board on Toxic Substances and Worker Health Office of Workers’ Compensation Programs. ACTION: Notice of meeting. AGENCY: Announcement of meeting of the Advisory Board on Toxic Substances and Worker Health (Advisory Board) for the Energy Employees Occupational Illness Compensation Program Act (EEOICPA). DATES: The Advisory Board will meet April 22–23, 2021, via teleconference, SUMMARY: PO 00000 Frm 00063 Fmt 4703 Sfmt 4703 17411 from 1:00 p.m. to 5:00 p.m. Eastern time on each day. ADDRESSES: Submission of comments, requests to speak, and materials for the record: You must submit comments, materials, and requests to speak at the Advisory Board meeting by April 15, 2021, identified by the Advisory Board name and the meeting date of April 22– 23, 2021, by any of the following methods: • Electronically: Send to: EnergyAdvisoryBoard@dol.gov (specify in the email subject line, for example ‘‘Request to Speak: Advisory Board on Toxic Substances and Worker Health’’). • Mail, express delivery, hand delivery, messenger, or courier service: Submit one copy to the following address: U.S. Department of Labor, Office of Workers’ Compensation Programs, Advisory Board on Toxic Substances and Worker Health, Room S–3522, 200 Constitution Ave. NW, Washington, DC 20210. Instructions: Your submissions must include the Agency name (OWCP), the committee name (the Advisory Board), and the meeting date (April 22–23, 2021). Due to security-related procedures, receipt of submissions by regular mail may experience significant delays. For additional information about submissions, see the SUPPLEMENTARY INFORMATION section of this notice. OWCP will make available publicly, without change, any comments, requests to speak, and speaker presentations, including any personal information that you provide. Therefore, OWCP cautions interested parties against submitting personal information such as Social Security numbers and birthdates. FOR FURTHER INFORMATION CONTACT: For press inquiries: Ms. Laura McGinnis, Office of Public Affairs, U.S. Department of Labor, Room S–1028, 200 Constitution Ave. NW, Washington, DC 20210; telephone (202) 693–4672; email Mcginnis.Laura@DOL.GOV. SUPPLEMENTARY INFORMATION: The Advisory Board will meet via teleconference: Thursday, April 22, 2021, from 1:00 p.m. to 5:00 p.m. Eastern time; and Friday, April 23, 2021, from 1:00 p.m. to 5:00 p.m. Eastern time. The teleconference number and other details for participating remotely will be posted on the Advisory Board’s website, http:// www.dol.gov/owcp/energy/regs/ compliance/AdvisoryBoard.htm, 72 hours prior to the commencement of the first meeting date. Advisory Board meetings are open to the public. Public comment session: Thursday, April 22, 2021, from 4:15 p.m. to 5:00 p.m. Eastern time. Please note that the E:\FR\FM\02APN1.SGM 02APN1

Agencies

[Federal Register Volume 86, Number 62 (Friday, April 2, 2021)]
[Notices]
[Pages 17410-17411]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-06797]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2011-0189]


Servicing Multi-Piece and Single Piece Rim Wheels; Extension of 
the Office of Management and Budget's (OMB) Approval of Information 
Collection (Paperwork) Requirements

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Request for public comments.

-----------------------------------------------------------------------

SUMMARY: OSHA solicits public comments concerning the proposal to 
extend the Office of Management and Budget's (OMB) approval of the 
information collection requirements specified in the Standard on 
Servicing Multi-Piece and Single Piece Rim Wheels. The paperwork 
provisions of the Standard includes a requirement that the manufacturer 
or a Registered Professional Engineer certify that repaired restraining 
devices and barriers meet the strength requirements specified in the 
Standard and a requirement that defective wheels and wheel components 
be marked or tagged.

DATES: Comments must be submitted (postmarked, sent, or received) by 
June 1, 2021.

ADDRESSES: 
    Electronically: You may submit comments, including attachments, 
electronically at http://www.regulations.gov, the Federal eRulemaking 
Portal. Follow the instructions online for submitting comments.
    Docket: To read or download comments or other material in the 
docket, go to http://www.regulations.gov. Documents in the docket are 
listed in the http://www.regulations.gov index; however, some 
information (e.g., copyrighted material) is not publicly available to 
read or download through the website. All submissions, including 
copyrighted material, are available for inspection through the OSHA 
Docket Office. Contact the OSHA Docket Office for assistance in 
locating docket submissions.
    Instructions: All submissions must include the agency name and the 
OSHA docket number for this Federal Register notice (OSHA-2011-0189). 
OSHA will place comments and requests to speak, including personal 
information, in the public docket, which may be available online. 
Therefore, OSHA cautions interested parties about submitting personal 
information such as Social Security numbers and birthdates. For further 
information on submitting comments, see the ``Public Participation'' 
heading in the section of this notice titled SUPPLEMENTARY INFORMATION.

FOR FURTHER INFORMATION CONTACT: Theda Kenney or Seleda Perryman, 
Directorate of Standards and Guidance, OSHA, U.S. Department of Labor; 
telephone (202) 693-2222.

SUPPLEMENTARY INFORMATION:

I. Background

    The Department of Labor, as part of the continuing effort to reduce 
paperwork and respondent (i.e., employer) burden, conducts a 
preclearance consultation program to provide the public with an 
opportunity to comment on proposed and continuing information 
collection requirements in accordance with the Paperwork Reduction Act 
of 1995 (PRA) (44 U.S.C. 3506(c)(2)(A)). This program ensures that 
information is in the desired format, reporting burden (time and costs) 
is minimal, collection instruments are clearly understood, and OSHA's 
estimate of the information collection burden is accurate. The 
Occupational Safety and Health Act of 1970 (OSH Act) (29 U.S.C. 651 et 
seq.) authorizes information collection by employers as necessary or 
appropriate for enforcement of the OSH Act or for developing 
information regarding the causes and prevention of occupational 
injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also 
requires that OSHA obtain such information with minimum burden upon 
employers, especially those operating small businesses, and to reduce 
to the maximum extent feasible unnecessary duplication of efforts in 
obtaining information (29 U.S.C. 657).
    Certification of repair (Sec.  1910.177(d)(3)(iv)). This paragraph 
requires that when restraining devices and barriers are removed from 
service because they are defective, they shall not be returned to 
service until they are repaired and reinspected. If the repair is 
structural, the manufacturer or a Registered Professional Engineer must 
certify that the strength requirements specified in Sec.  
1910.177(d)(3)(i) of the Standard have been met.
    The certification records are used to assure that equipment has 
been properly repaired. The certification records also provide the most 
efficient means for OSHA compliance officers to determine that an 
employer is complying with the Standard.
    Marking or tagging of wheel components (Sec.  1910.177(e)(2)). This 
paragraph requires that defective wheels and wheel components ``be 
marked or tagged unserviceable and removed from the service area.'' 
Under this requirement, OSHA is providing employers with sufficient 
information from which they can derive the wording to use in marking 
the object or constructing a tag. Therefore, this provision imposes no 
paperwork burden because it falls within the portion of 5 CFR 
1320(c)(2) that states, ``The public disclosure of information 
originally supplied by the Federal government to the recipient for the 
purpose of disclosure to the public is not included within this 
definition [of `collection of information']''.

II. Special Issues for Comment

    OSHA has a particular interest in comments on the following issues:
     Whether the proposed information collection requirements 
are necessary for the proper performance of the agency's functions, 
including whether the information is useful;
     The accuracy of OSHA's estimate of the burden (time and 
costs) of the information collection requirements, including the 
validity of the methodology and assumptions used;

[[Page 17411]]

     The quality, utility, and clarity of the information 
collected; and
     Ways to minimize the burden on employers who must comply; 
for example, by using automated or other technological information 
collection and transmission techniques.

III. Proposed Actions

    OSHA is requesting that OMB extend the approval of the information 
collection requirements contained in the Standard on Servicing Multi-
Piece and Single Piece Rim Wheels (29 CFR 1910.177). OSHA is proposing 
to retain the current burden hour estimate of one (1) hour. The agency 
will summarize the comments submitted in response to this notice and 
will include this summary in the request to OMB.
    Type of Review: Extension of a currently approved collection.
    Title: Servicing Multi-Piece and Single Piece Rim Wheels (29 CFR 
1910.177).
    OMB Control Number: 1218-0219.
    Affected Public: Business or other for-profits.
    Number of Respondents: 85.
    Frequency of Responses: On occasion.
    Average Time per Response: Various.
    Estimated Total Burden Hours: 1.
    Estimated Cost (Operation and Maintenance): $0.

IV. Public Participation--Submission of Comments on This Notice and 
Internet Access to Comments and Submissions

    You may submit comments in response to this document as follows: 
(1) Electronically at http://regulations.gov, which is the Federal 
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All 
comments, attachments, and other materials must identify the agency 
name and the OSHA docket number for the ICR (Docket No. OSHA-2011-
0189). Please note: While OSHA's Docket Office is continuing to accept 
and process submissions by regular mail, due to the COVID-19 pandemic, 
the Docket Office is closed to the public and not able to receive 
submissions to the docket by hand, express mail, messenger, and courier 
service. All comments, attachments, and other material must identify 
the agency name and the OSHA docket number for the ICR (Docket No. 
OSHA-2011-0189). You may supplement electronic submissions by uploading 
document files electronically. If you wish to mail additional materials 
in reference to an electronic or facsimile submission, you must submit 
them to the OSHA Docket Office (see the section of this notice titled 
ADDRESSES). The additional materials must clearly identify your 
electronic comments by your name, date, and the docket number so the 
agency can attach them to your comments.
    Due to security procedures, the use of regular mail may cause a 
significant delay in the receipt of comments.
    Comments and submissions are posted without change at http://www.regulations.gov. Therefore, OSHA cautions comments about submitting 
personal information such as social security numbers and dates of 
birth. Although all submissions are listed in the http://www.regulations.gov index, some information (e.g., copyrighted 
material) is not publicly available to read or download through this 
website. All submissions, including copyrighted material, are available 
for inspection and copying at the OSHA Docket Office. Information on 
using the http://www.regulations.gov website to submit comments and 
access the docket is available at the website's ``User Tips'' link. 
Contact the OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627) 
for information about materials not available through the website, and 
for assistance in using the internet to locate docket submissions.

V. Authority and Signature

    James S. Frederick, Principal Deputy Assistant Secretary of Labor 
for Occupational Safety and Health, directed the preparation of this 
notice. The authority for this notice is the Paperwork Reduction Act of 
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 1-2012 
(77 FR 3912).

    Signed at Washington, DC, on March 25, 2021.
James S. Frederick,
Principal Deputy Assistant Secretary of Labor for Occupational Safety 
and Health.
[FR Doc. 2021-06797 Filed 4-1-21; 8:45 am]
BILLING CODE 4510-26-P