Aluminum Extrusions From the People's Republic of China: Final Results of Countervailing Duty Administrative Review and Rescission of Review, in Part; 2018, 6630-6634 [2021-01370]

Download as PDF 6630 Federal Register / Vol. 86, No. 13 / Friday, January 22, 2021 / Notices Records generated from this meeting may be inspected and reproduced at the Regional Programs Unit Office, as they become available, both before and after the meeting. Records of the meeting will be available via https:// www.facadatabase.gov/FACA/ FACAPublicViewCommitteeDetails?id= a10t0000001gzlZAAQ under the Commission on Civil Rights, Illinois Advisory Committee link. Persons interested in the work of this Committee are directed to the Commission’s website, https://www.usccr.gov, or may contact the Regional Programs Unit at the above email or street address. Agenda I. Welcome & Roll Call II. Chair’s comments III. Discussion: Education Project IV. Next Steps V. Public Comment VI. Adjournment Dated: January 15, 2021. David Mussatt, Supervisory Chief, Regional Programs Unit. [FR Doc. 2021–01388 Filed 1–21–21; 8:45 am] The Department of Commerce’s FY 2018 Service Contract Inventory is included in the government-wide inventory available at: https://www.acquisition.gov/servicecontract-inventory, which can be filtered to display the FY 2018 inventory for each agency. In addition to the link to access DOC’s FY 2018 service contract inventory, the FY 2017 Analysis Report and Plan for analyzing the FY 2018 data is on the Office of Acquisition Management homepage at the following link https:// www.osec.doc.gov/oam/. OFPP’s guidance memo on service contract inventories is available at: https:// www.whitehouse.gov/sites/default/files/ omb/procurement/memo/servicecontract-inventories-guidance11052010.pdf. FOR FURTHER INFORMATION CONTACT: Questions regarding the service contract inventory should be directed to Virna Winters, Director for Acquisitions Policy and Oversight Division at 202– 482–4248 or vwinters@doc.gov. ADDRESSES: Barry E. Berkowitz, Senior Procurement Executive and Director, Office of Acquisition Management. BILLING CODE;P [FR Doc. 2021–01308 Filed 1–21–21; 8:45 am] DEPARTMENT OF COMMERCE BILLING CODE P Office of the Secretary [Docket No.: 200723–0198] DEPARTMENT OF COMMERCE Public Availability of Department of Commerce FY 2018 Service Contract Inventory Data International Trade Administration AGENCY: Office of the Secretary, Department of Commerce. ACTION: Notice of Public Availability of FY 2018 Service Contract Inventories Data. Aluminum Extrusions From the People’s Republic of China: Final Results of Countervailing Duty Administrative Review and Rescission of Review, in Part; 2018 In accordance with Section 743 of Division C of the Consolidated Appropriations Act of 2010 (Pub. L. 111–117), the Department of Commerce (DOC) is publishing this notice to advise the public of the availability of the Fiscal Year (FY) 2018 Service Contract Inventory data, a report that analyzes DOC’s FY 2017 Service Contract Inventory and a plan for the analysis of FY 2018 Service Contract Inventory. The service contract inventory provides information on service contract actions over $150,000 made in FY 2018. The information is organized by function to show how contracted resources are distributed throughout the agency. The inventory has been developed in accordance with guidance on service contract inventories issued on November 5, 2010, by the Office of Management and Budget’s Office of Federal Procurement Policy (OFPP). AGENCY: jbell on DSKJLSW7X2PROD with NOTICES SUMMARY: VerDate Sep<11>2014 19:27 Jan 21, 2021 Jkt 253001 [C–570–968] Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY: The Department of Commerce (Commerce) has completed its administrative review of the countervailing duty (CVD) order on aluminum extrusions from the People’s Republic of China (China) for the period of review (POR) January 1, 2018 through December 31, 2018, and determines that countervailable subsidies are being provided to producers and exporters of aluminum extrusions. The final net countervailable subsidy rates are listed below in the section titled ‘‘Final Results of Administrative Review.’’ DATES: Applicable January 22, 2021. FOR FURTHER INFORMATION CONTACT: Davina Friedmann, AD/CVD Operations, Office VI, Enforcement and Compliance, International Trade Administration, U.S. Department of PO 00000 Frm 00019 Fmt 4703 Sfmt 4703 Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–0698. SUPPLEMENTARY INFORMATION: Background Commerce published the Preliminary Results of this administrative review in the Federal Register on August 5, 2020.1 We invited parties to comment on the Preliminary Results. No interested party submitted comments or requested a hearing in this administrative review. On April 24, 2020, Commerce tolled all deadlines in administrative reviews by 50 days.2 On July 21, 2020, Commerce tolled all deadlines in administrative reviews by an additional 60 days,3 thereby extending the deadline for these final results until January 19, 2021. Commerce conducted this review in accordance with section 751(a)(1)(A) of the Tariff Act of 1930, as amended (the Act). Scope of the Order The merchandise covered by the order is aluminum extrusions from China. The complete description of the scope is provided at Appendix I of this notice. Changes Since the Preliminary Results As no party submitted comments on the Preliminary Results, Commerce made no changes for these final results of review. Rescission of Review In the Preliminary Results, we stated our intention to rescind the review with respect to companies named in the Initiation Notice for which all review requests were timely withdrawn in accordance with 19 CFR 351.213(d)(1). These companies are listed in Appendix II of this notice. For these companies, Commerce is rescinding the administrative review and will assess duties at rates equal to the rates of the cash deposits for estimated countervailing duties required at the time of entry, or withdrawn from warehouse, for consumption, during the POR, in accordance with 19 CFR 351.212(c)(1).4 1 See Aluminum Extrusions from the People’s Republic of China: Preliminary Results of the Countervailing Duty Administrative Review, Rescission of Review, in Part, and Intent to Rescind, in Part; 2018, 85 FR 47349 (August 5, 2020) (Preliminary Results), and accompanying Preliminary Decision Memorandum. 2 See Memorandum, ‘‘Tolling of Deadlines for Antidumping and Countervailing Duty Administrative Reviews in Response to Operational Adjustments Due to COVID–19,’’ dated April 24, 2020. 3 See Memorandum, ‘‘Tolling of Deadlines for Antidumping and Countervailing Duty Administrative Reviews,’’ dated July 21, 2020. 4 See Preliminary Results, 85 FR 47349, 47350. E:\FR\FM\22JAN1.SGM 22JAN1 Federal Register / Vol. 86, No. 13 / Friday, January 22, 2021 / Notices disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of return or destruction of APO materials or conversion to judicial Final ad valorem protective order is hereby requested. Company rate Failure to comply with the regulations (percent) and the terms of an APO is a Activa International Inc ............... 242.15 sanctionable violation. Changzou Tenglong Auto Parts Notification to Interested Parties Co. Ltd .................................... 16.08 We are issuing and publishing these CRRC Changzhou Auto Parts Co. Ltd .................................... 242.15 results in accordance with sections Dongguan Aoda Aluminum Co. 751(a)(1) and 777(i)(1) of the Act. Final Results of Administrative Review In accordance with 19 CFR 351.221(b)(5), we determine the following final net subsidy rates for the 2018 administrative review: 5 Ltd ........................................... Guangdong Xingfa Aluminum Co., Ltd ................................... Precision Metal Works Ltd ......... 16.08 242.15 242.15 Assessment Rates In accordance with 19 CFR 351.212(b)(2), Commerce intends to issue appropriate assessment instructions to U.S. Customs and Border Protection (CBP) 15 days after publication of these final results of review, to liquidate shipments of subject merchandise produced and/or exported by the companies listed above, entered, or withdrawn from warehouse, for consumption on or after January 1, 2018 through December 31, 2018, at the ad valorem rates listed above. jbell on DSKJLSW7X2PROD with NOTICES Cash Deposit Requirements In accordance with section 751(a)(1) of the Act, Commerce will instruct CBP to collect cash deposits of estimated countervailing duties in the amounts shown for each of the respective companies listed above for shipments of subject merchandise entered, or withdrawn from warehouse, for consumption on or after the date of publication of these final results of review. For all non-reviewed firms, we will instruct CBP to collect cash deposits of estimated countervailing duties at the most recent companyspecific or all-others rate applicable to the company, as appropriate. These cash deposit requirements, when imposed, shall remain in effect until further notice. Administrative Protective Order This notice serves as a reminder to parties subject to administrative protective order (APO) of their responsibility concerning the destruction of proprietary information 5 See Preliminary Results; see also Memorandum, ‘‘Administrative Review of Countervailing Duty Order on Aluminum Extrusions from the People’s Republic of China: AFA Calculation Memorandum for the Preliminary Results of Review; 2018,’’ dated August 28, 2020. VerDate Sep<11>2014 19:27 Jan 21, 2021 Jkt 253001 Dated: January 13, 2021. Jeffrey I. Kessler, Assistant Secretary for Enforcement and Compliance. Appendix I Scope of the Order The merchandise covered by the order{s} is aluminum extrusions which are shapes and forms, produced by an extrusion process, made from aluminum alloys having metallic elements corresponding to the alloy series designations published by The Aluminum Association commencing with the numbers 1, 3, and 6 (or proprietary equivalents or other certifying body equivalents). Specifically, the subject merchandise made from aluminum alloy with an Aluminum Association series designation commencing with the number 1 contains not less than 99 percent aluminum by weight. The subject merchandise made from aluminum alloy with an Aluminum Association series designation commencing with the number 3 contains manganese as the major alloying element, with manganese accounting for not more than 3.0 percent of total materials by weight. The subject merchandise is made from an aluminum alloy with an Aluminum Association series designation commencing with the number 6 contains magnesium and silicon as the major alloying elements, with magnesium accounting for at least 0.1 percent but not more than 2.0 percent of total materials by weight, and silicon accounting for at least 0.1 percent but not more than 3.0 percent of total materials by weight. The subject aluminum extrusions are properly identified by a four-digit alloy series without either a decimal point or leading letter. Illustrative examples from among the approximately 160 registered alloys that may characterize the subject merchandise are as follows: 1350, 3003, and 6060. Aluminum extrusions are produced and imported in a wide variety of shapes and forms, including, but not limited to, hollow profiles, other solid profiles, pipes, tubes, bars, and rods. Aluminum extrusions that are drawn subsequent to extrusion (drawn aluminum) are also included in the scope. Aluminum extrusions are produced and imported with a variety of finishes (both coatings and surface treatments), and types of fabrication. The types of coatings and treatments applied to subject aluminum PO 00000 Frm 00020 Fmt 4703 Sfmt 4703 6631 extrusions include, but are not limited to, extrusions that are mill finished (i.e., without any coating or further finishing), brushed, buffed, polished, anodized (including brightdip anodized), liquid painted, or powder coated. Aluminum extrusions may also be fabricated, i.e., prepared for assembly. Such operations would include, but are not limited to, extrusions that are cut-to-length, machined, drilled, punched, notched, bent, stretched, knurled, swedged, mitered, chamfered, threaded, and spun. The subject merchandise includes aluminum extrusions that are finished (coated, painted, etc.), fabricated, or any combination thereof. Subject aluminum extrusions may be described at the time of importation as parts for final finished products that are assembled after importation, including, but not limited to, window frames, door frames, solar panels, curtain walls, or furniture. Such parts that otherwise meet the definition of aluminum extrusions are included in the scope. The scope includes the aluminum extrusion components that are attached (e.g., by welding or fasteners) to form subassemblies, i.e., partially assembled merchandise unless imported as part of the finished goods ‘kit’ defined further below. The scope does not include the non-aluminum extrusion components of subassemblies or subject kits. Subject extrusions may be identified with reference to their end use, such as fence posts, electrical conduits, door thresholds, carpet trim, or heat sinks (that do not meet the finished heat sink exclusionary language below). Such goods are subject merchandise if they otherwise meet the scope definition, regardless of whether they are ready for use at the time of importation. The following aluminum extrusion products are excluded: aluminum extrusions made from aluminum alloy with an Aluminum Association series designations commencing with the number 2 and containing in excess of 1.5 percent copper by weight; aluminum extrusions made from aluminum alloy with an Aluminum Association series designation commencing with the number 5 and containing in excess of 1.0 percent magnesium by weight; and aluminum extrusions made from aluminum alloy with an Aluminum Association series designation commencing with the number 7 and containing in excess of 2.0 percent zinc by weight. The scope also excludes finished merchandise containing aluminum extrusions as parts that are fully and permanently assembled and completed at the time of entry, such as finished windows with glass, doors with glass or vinyl, picture frames with glass pane and backing material, and solar panels. The scope also excludes finished goods containing aluminum extrusions that are entered unassembled in a ‘‘finished goods kit.’’ A finished goods kit is understood to mean a packaged combination of parts that contains, at the time of importation, all of the necessary parts to fully assemble a final finished good and requires no further finishing or fabrication, such as cutting or punching, and is assembled ‘‘as is’’ into a finished product. An imported product will not be considered a ‘‘finished goods kit’’ and therefore excluded from the scope of the E:\FR\FM\22JAN1.SGM 22JAN1 jbell on DSKJLSW7X2PROD with NOTICES 6632 Federal Register / Vol. 86, No. 13 / Friday, January 22, 2021 / Notices order{s} merely by including fasteners such as screws, bolts, etc. in the packaging with an aluminum extrusion product. The scope also excludes aluminum alloy sheet or plates produced by other than the extrusion process, such as aluminum products produced by a method of casting. Cast aluminum products are properly identified by four digits with a decimal point between the third and fourth digit. A letter may also precede the four digits. The following Aluminum Association designations are representative of aluminum alloys for casting: 208.0, 295.0, 308.0, 355.0, C355.0, 356.0, A356.0, A357.0, 360.0, 366.0, 380.0, A380.0, 413.0, 443.0, 514.0, 518.1, and 712.0. The scope also excludes pure, unwrought aluminum in any form. The scope also excludes collapsible tubular containers composed of metallic elements corresponding to alloy code 1080A as designated by the Aluminum Association where the tubular container (excluding the nozzle) meets each of the following dimensional characteristics: (1) Length of 37 millimeters (‘‘mm’’) or 62 mm, (2) outer diameter of 11.0 mm or 12.7 mm, and (3) wall thickness not exceeding 0.13 mm. Also excluded from the scope of these order{s} are finished heat sinks. Finished heat sinks are fabricated heat sinks made from aluminum extrusions the design and production of which are organized around meeting certain specified thermal performance requirements and which have been fully, albeit not necessarily individually, tested to comply with such requirements. Also excluded from the scope of the order{s} is certain rectangular wire produced from continuously cast rolled aluminum wire rod, which is subsequently extruded to dimension to form rectangular wire. The product is made from aluminum alloy grade 1070 or 1370, with no recycled metal content allowed. The dimensions of the wire are 5 mm (+/- 0.05 mm) in width and 1.0 mm (+/ - 0.02 mm) in thickness. Imports of rectangular wire are provided for under HTSUS category 7605.19.000. Imports of the subject merchandise are provided for under the following categories of the Harmonized Tariff Schedule of the United States (HTSUS): 7606.12.3091, 7606.12.3096, 7604.21.0010, 7604.21.0090, 7604.29.1010, 7604.29.1090, 7604.29.3060; 7604.29.3090; 7604.29.5050; 7604.29.5090; 8541.90.00.00, 8708.10.30.50, 8708.99.68.90, 6603.90.8100, 7616.99.51, 8479.89.94, 8481.90.9060, 8481.90.9085, 9031.90.9195, 8424.90.9080, 9405.99.4020, 9031.90.90.95, 7616.10.90.90, 7609.00.00, 7610.10.00, 7610.90.00, 7615.10.30, 7615.10.71, 7615.10.91, 7615.19.10, 7615.19.30, 7615.19.50, 7615.19.70, 7615.19.90, 7615.20.00, 7616.99.10, 7616.99.50, 8479.89.98, 8479.90.94, 8513.90.20, 9403.10.00, 9403.20.00, 7604.21.00.00, 7604.29.10.00, 7604.29.30.10, 7604.29.30.50, 7604.29.50.30, 7604.29.50.60, 7608.20.00.30, 7608.20.00.90, 8302.10.30.00, 8302.10.60.30, 8302.10.60.60, 8302.10.60.90, 8302.20.00.00, 8302.30.30.10, 8302.30.30.60, 8302.41.30.00, 8302.41.60.15, 8302.41.60.45, 8302.41.60.50, 8302.41.60.80, 8302.42.30.10, 8302.42.30.15, 8302.42.30.65, 8302.49.60.35, 8302.49.60.45, VerDate Sep<11>2014 19:27 Jan 21, 2021 Jkt 253001 8302.49.60.55, 8302.49.60.85, 8302.50.00.00, 8302.60.90.00, 8305.10.00.50, 8306.30.00.00, 8414.59.60.90, 8415.90.80.45, 8418.99.80.05, 8418.99.80.50, 8418.99.80.60, 8419.90.10.00, 8422.90.06.40, 8473.30.20.00, 8473.30.51.00, 8479.90.85.00, 8486.90.00.00, 8487.90.00.80, 8503.00.95.20, 8508.70.00.00, 8515.90.20.00, 8516.90.50.00, 8516.90.80.50, 8517.70.00.00, 8529.90.73.00, 8529.90.97.60, 8536.90.80.85, 8538.10.00.00, 8543.90.88.80, 8708.29.50.60, 8708.80.65.90, 8803.30.00.60, 9013.90.50.00, 9013.90.90.00, 9401.90.50.81, 9403.90.10.40, 9403.90.10.50, 9403.90.10.85, 9403.90.25.40, 9403.90.25.80, 9403.90.40.05, 9403.90.40.10, 9403.90.40.60, 9403.90.50.05, 9403.90.50.10, 9403.90.50.80, 9403.90.60.05, 9403.90.60.10, 9403.90.60.80, 9403.90.70.05, 9403.90.70.10, 9403.90.70.80, 9403.90.80.10, 9403.90.80.15, 9403.90.80.20, 9403.90.80.41, 9403.90.80.51, 9403.90.80.61, 9506.11.40.80, 9506.51.40.00, 9506.51.60.00, 9506.59.40.40, 9506.70.20.90, 9506.91.00.10, 9506.91.00.20, 9506.91.00.30, 9506.99.05.10, 9506.99.05.20, 9506.99.05.30, 9506.99.15.00, 9506.99.20.00, 9506.99.25.80, 9506.99.28.00, 9506.99.55.00, 9506.99.60.80, 9507.30.20.00, 9507.30.40.00, 9507.30.60.00, 9507.90.60.00, and 9603.90.80.50. The subject merchandise entered as parts of other aluminum products may be classifiable under the following additional Chapter 76 subheadings: 7610.10, 7610.90, 7615.19, 7615.20, and 7616.99, as well as under other HTSUS chapters. In addition, fin evaporator coils may be classifiable under HTSUS numbers: 8418.99.80.50 and 8418.99.80.60. While HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of these order{s} is dispositive. Appendix II List of Companies for Which We Are Rescinding This Administrative Review 1. Acro Import and Export Co. 2. Activa Leisure Inc. 3. Agilent Technologies Co. Ltd (China) 4. Allied Maker Limited 5. Alnan Aluminum Co., Ltd. 6. Alnan Aluminum Ltd. 7. Aluminicaste Fundicion de Mexico 8. AMC Limited 9. AMC Ltd. 10. Anji Chang Hong Chain Manufacturing 11. Anshan Zhongda Industry Co., Ltd. 12. Aoda Aluminium (Hong Kong) Co., Limited 13. AsiaAlum Group 14. Atlas Integrated Manufacturing Ltd. 15. Bath Fitter 16. Behr-Hella Thermocontrol (Shanghai) Co. Ltd. 17. Belton (Asia) Development Limited 18. Belton (Asia) Development Ltd. 19. Birchwoods (Lin’an) Leisure Products Co., Ltd. 20. Bolnar Hong Kong Ltd. 21. Bracalente Metal Products (Suzhou) Co., Ltd. 22. Brilliance General Equipment Co., Ltd. 23. Changshu Changshen Aluminum Products Co., Ltd. 24. Changshu Changsheng Aluminum Products Co., Ltd. 25. Changzhou Changzheng Evaporator Co., Ltd. PO 00000 Frm 00021 Fmt 4703 Sfmt 4703 26. Changzhou Changzhen Evaporator Co., Ltd. 27. Changzhou Tenglong Auto Accessories Manufacturing Co. Ltd. 28. Changzhou Tenglong Auto Parts Co. Ltd. 29. China Square 30. China Square Industrial Co. 31. China Square Industrial Ltd. 32. China Zhongwang Holdings, Ltd. 33. Chiping One Stop Industrial & Trade Co., Ltd. 34. Classic & Contemporary Inc. 35. Clear Sky Inc. 36. Coclisa S.A. de C.V. 37. Cosco (J.M.) Aluminum Co., Ltd. 38. Cosco (J.M.) Aluminum Development Co. Ltd. 39. Dalian Huacheng Aquatic Products 40. Dalian Liwang Trade Co., Ltd. 41. Danfoss Micro Channel Heat Exchanger (Jia Xing) Co., Ltd. 42. Daya Hardware Co Ltd. 43. Dongguan Dazhan Metal Co., Ltd. 44. Dongguan Golden Tiger Hardware Industrial Co., Ltd. 45. Dongguang Aoda Aluminum Co., Ltd. 46. Dragonluxe Limited 47. Dynabright International Group (HK) Ltd. 48. Dynamic Technologies China 49. ETLA Technology (Wuxi) Co. Ltd. 50. Ever Extend Ent. Ltd. 51. Fenghua Metal Product Factory 52. First Union Property Limited 53. FookShing Metal & Plastic Co. Ltd. 54. Foreign Trade Co. of Suzhou New & High-Tech Industrial Development Zone 55. Foshan City Nanhai Hongjia Aluminum Alloy Co., Ltd. 56. Foshan Golden Source Aluminum Products Co., Ltd. 57. Foshan Guangcheng Aluminium Co., Ltd. 58. Foshan Jinlan Aluminum Co. Ltd. 59. Foshan JinLan Aluminum Co., Ltd. 60. Foshan JMA Aluminum Company Limited 61. Foshan Nanhai Niu Yuan Hardware Product Co., Ltd. 62. Foshan Shunde Aoneng Electrical Appliances Co., Ltd. 63. Foshan Shanshui Fenglu Aluminum Co., Ltd. 64. Foshan Yong Li Jian Aluminum Co., Ltd. 65. Fujian Sanchuan Aluminum Co., Ltd. 66. Fukang Aluminum & Plastic Import and Export Co., Ltd. 67. Fuzhou Sunmodo New Energy Equipment 68. Gaotang Xinhai Economy & Trade Co., Ltd. 69. Genimex Shanghai, Ltd. 70. Global Hi-Tek Precision Co. Ltd 71. Global PMX Dongguan Co., Ltd. 72. Global Point Technology (Far East) Limited 73. Golden Dragon Precise Copper Tube Group, Inc. 74. Gold Mountain International Development, Ltd. 75. Gran Cabrio Capital Pte. Ltd. 76. Gree Electric Appliances 77. Green Line Hose & Fittings 78. GT88 Capital Pte. Ltd. E:\FR\FM\22JAN1.SGM 22JAN1 jbell on DSKJLSW7X2PROD with NOTICES Federal Register / Vol. 86, No. 13 / Friday, January 22, 2021 / Notices 79. Guang Ya Aluminium Industries (HK) Ltd. 80. Guang Ya Aluminium Industries Co. Ltd. 81. Guang Ya Aluminum Industries Company Ltd. 82. Guangcheng Aluminum Co., Ltd. 83. Guangdong Hao Mei Aluminum Co., Ltd. 84. Guangdong Jianmei Aluminum Profile Company Limited 85. Guangdong JMA Aluminum Profile Factory (Group) Co., Ltd. 86. Guangdong Midea 87. Guangdong Midea Microwave and Electrical Appliances 88. Guangdong Nanhai Foodstuffs Imp. & Exp. Co., Ltd. 89. Guangdong Weiye Aluminum Factory Co., Ltd. 90. Guangdong Whirlpool Electrical Appliances Co., Ltd. 91. Guangdong Xin Wei Aluminum Products Co., Ltd. 92. Guangdong Yonglijian Aluminum Co., Ltd. 93. Guangdong Zhongya Aluminum Company Ltd. 94. Guangzhou Jangho Curtain Wall System Engineering Co., Ltd. 95. Guangzhou Mingcan Die-Casting Hardware Products Co., Ltd. 96. Hangzhou Xingyi Metal Products Co., Ltd. 97. Hanwood Enterprises Limited 98. Hanyung Alcoba Co., Ltd. 99. Hanyung Alcobis Co., Ltd. 100. Hanyung Metal (Suzhou) Co., Ltd. 101. Hao Mei Aluminum Co., Ltd. 102. Hao Mei Aluminum International Co., Ltd. 103. Hebei Xusen Wire Mesh Products Co., Ltd. 104. Henan New Kelong Electrical Appliances Co., Ltd. 105. Henan Zhongduo Aluminum Magnesium New Material Co., Ltd. 106. Hitachi High-Technologies (Shanghai) Co., Ltd. 107. Hong Kong Gree Electric Appliances Sales Limited 108. Hong Kong Modern Non-Ferrous Metal 109. Honsense Development Company 110. Hui Mei Gao Aluminum Foshan Co., Ltd. 111. Huixin Aluminum 112. IDEX Dinglee Technology (Tianjin) Co., Ltd. 113. IDEX Health 114. IDEX Technology Suzhou Co., Ltd. 115. Innovative Aluminum (Hong Kong) Limited 116. iSource Asia 117. Jackson Travel Products Co., Ltd. 118. Jangho Curtain Wall Hong Kong Ltd. 119. Jiangmen Jianghai Foreign Ent. Gen. 120. Jiangmen Jianghai District Foreign Economic Enterprise Corp. Ltd. 121. Jiangmen Qunxing Hardware Diecasting Co., Ltd. 122. Jiangsu Changfa Refrigeration Co. 123. Jiangyin Suncitygaylin 124. Jiangyin Trust International Inc. 125. Jiangyin Xinhong Doors and Windows Co., Ltd. VerDate Sep<11>2014 19:27 Jan 21, 2021 Jkt 253001 126. Jiaxing Jackson Travel Products Co., Ltd. 127. Jiaxing Taixin Metal Products Co., Ltd. 128. Jiuyan Co., Ltd. 129. JMA (HK) Company Limited 130. Johnson Precision Engineering (Suzhou) Co., Ltd. 131. Justhere Co., Ltd. 132. Kam Kiu Aluminum Products Sdn Bhd 133. Kanal Precision Aluminum Product Co., Ltd. 134. Karlton Aluminum Company Ltd. 135. Kong Ah International Company Limited 136. Kromet International 137. Kromet International Inc. 138. Kromet Intl Inc. 139. Kunshan Giant Light Metal Technology Co., Ltd. 140. Liaoning Zhong Da Industrial Aluminum Co., Ltd. 141. Liaoning Zhongwang Group Co., Ltd. 142. Liaoyang Zhongwang Aluminum Profile Co. Ltd. 143. Longkou Donghai Trade Co., Ltd. 144. MAAX Bath Inc. 145. MAHLE Holding (China) Co., Ltd. 146. Metal Tech Co Ltd. 147. Metaltek Group Co., Ltd. 148. Metaltek Metal Industry Co., Ltd. 149. Midea Air Conditioning Equipment Co., Ltd. 150. Midea Electric Trading Co., Pte Ltd. 151. Midea International Trading Co., Ltd. 152. Midea International Training Co., Ltd. 153. Miland Luck Limited 154. Nanhai Textiles Import & Export Co., Ltd. 155. New Asia Aluminum & Stainless Steel Product Co., Ltd. 156. New Zhongya Aluminum Factory 157. Nidec Sankyo Singapore Pte. Ltd. 158. Nidec Sankyo (Zhejang) Corporation 159. Nidec Sankyo Zhejiang Corporation 160. Ningbo Coaster International Co., Ltd. 161. Ningbo Hi Tech Reliable Manufacturing Company 162. Ningbo Innopower Tengda Machinery 163. Ningbo Ivy Daily Commodity Co., Ltd. 164. Ningbo Yili Import and Export Co., Ltd. 165. North China Aluminum Co., Ltd. 166. North Fenghua Aluminum Ltd. 167. Northern States Metals 168. PanAsia Aluminum (China) Limited 169. PENCOM Dongguan China 170. Pengcheng Aluminum Enterprise Inc. 171. Permasteelisa Hong Kong Ltd. 172. Permasteelisa South China Factory 173. Pingguo Aluminum Company Limited 174. Pingguo Asia Aluminum Co., Ltd. 175. Popular Plastics Company Limited 176. Press Metal International Ltd. 177. Qingdao Sea Nova Building 178. Samuel, Son & Co., Ltd. 179. Sanchuan Aluminum Co., Ltd. 180. Sanhua (Hangzhou) Micro Channel Heat Exchanger Co., Ltd. 181. Shandong Fukang Aluminum & Plastic Co. Ltd. 182. Shandong Huajian Aluminum Group 183. Shangdong Huasheng Pesticide Machinery Co. 184. Shangdong Nanshan Aluminum Co., Ltd. PO 00000 Frm 00022 Fmt 4703 Sfmt 4703 6633 185. Shanghai Automobile Air Conditioner Accessories Ltd. 186. Shanghai Automobile Air-Conditioner Accessories Co Ltd. 187. Shanghai Canghai Aluminum Tube Packaging Co., Ltd. 188. Shanghai Dofiberone Composites Co. Ltd. 189. Shanghai Dongsheng Metal 190. Shanghai Shen Hang Imp & Exp Co., Ltd. 191. Shanghai Tongtai Precise Aluminum Alloy Manufacturing Co. Ltd. 192. Shanghai Top-Ranking Aluminum Products Co., Ltd. 193. Shanghai Top-Ranking New Materials Co., Ltd. 194. Shenzhen Hudson Technology Development Co. 195. Shenzhen Jiuyuan Co., Ltd. 196. Sihui Shi Guo Yao Aluminum Co., Ltd. 197. Sincere Profit 198. Skyline Exhibit Systems (Shanghai) Co. Ltd. 199. Southwest Aluminum (Group) Co., Ltd. 200. Springs Window Fashions De Victoria 201. Summit Plastics Nanjing Co. Ltd. 202. Suzhou JRP Import & Export Co., Ltd. 203. Suzhou New Hongji Precision Part Co. 204. Tai-Ao Aluminum (Taishan) Co. Ltd. 205. Taishan City Kam Kiu Aluminium Extrusion Co., Ltd. 206. Taitoh Machinery Shanghai Co. Ltd. 207. Taizhou Lifeng Manufacturing Co., Ltd. 208. Taizhou United Imp. & Exp. Co., Ltd. 209. tenKsolar (Shanghai) Co., Ltd. 210. Tianjin Ganglv Nonferrous Metal Materials Co., Ltd. 211. Tianjin Jinmao Import & Export Corp., Ltd. 212. Tianjin Ruxin Electric Heat Transmission Technology Co., Ltd. 213. Tianjin Xiandai Plastic & Aluminum Products Co., Ltd. 214. Tiazhou Lifeng Manufacturing Corporation 215. Top-Wok Metal Co., Ltd. 216. Traffic Brick Network, LLC 217. Union Aluminum (SIP) Co. 218. Union Industry (Asia) Co., Ltd. 219. USA Worldwide Door Components (Pinghu) Co., Ltd. 220. Wenzhou Shengbo Decoration & Hardware 221. Whirlpool Canada L.P. 222. Whirlpool (Guangdong) 223. Whirlpool Microwave Products Development Ltd. 224. Wonjin Autoparts 225. Worldwide Door Components, Inc. 226. WTI Building Products, Ltd. 227. Wuxi Lutong Fiberglass Doors Co., Ltd. 228. Xinchang Yongqiang Air Conditioning Accessories Co., Ltd. 229. Xin Wei Aluminum Co. 230. Xin Wei Aluminum Company Limited 231. Xinya Aluminum & Stainless Steel Product Co., Ltd. 232. Yuyao Fanshun Import & Export Co., Ltd. 233. Yuyao Haoshen Import & Export 234. Zahoqing China Square Industry Limited E:\FR\FM\22JAN1.SGM 22JAN1 6634 Federal Register / Vol. 86, No. 13 / Friday, January 22, 2021 / Notices 235. Zhaoqing Asia Aluminum Factory Company Ltd. 236. Zhaoqing China Square Industrial Ltd. 237. Zhaoqing China Square Industry Limited 238. Zhaoqing New Zhongya Aluminum Co., Ltd. 239. Zhejiang Anji Xinxiang Aluminum Co., Ltd. 240. Zhejiang Lilies Industrial and Commercial Co. 241. Zhejiang Yili Automobile Air Condition Co., Ltd. 242. Zhejiang Yongkang Listar Aluminum Industry Co., Ltd. 243. Zhejiang Zhengte Group Co., Ltd. 244. Zhenjiang Xinlong Group Co., Ltd. 245. Zhongshan Daya Hardware Co., Ltd. 246. Zhongshan Gold Mountain Aluminum Factory Ltd. 247. Zhongya Shaped Aluminum (HK) Holding Limited 248. Zhuhai Runxingtai Electrical Equipment Co., Ltd. [FR Doc. 2021–01370 Filed 1–21–21; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration [RTID 0648–XA825] Fisheries of the South Atlantic; Southeast Data, Assessment, and Review (SEDAR); Public Meeting National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA), Commerce. ACTION: Notice of SEDAR 66 Assessment Webinar III for South Atlantic Tilefish. AGENCY: The SEDAR 66 stock assessment of the South Atlantic stock of Tilefish will consist of a data scoping webinar, a workshop, and a series of assessment webinars. See SUPPLEMENTARY INFORMATION. DATES: The SEDAR 66 South Atlantic Tilefish Assessment Webinar III will be held via webinar on February 18, 2021, from 12 p.m. until 3 p.m., EST. The established times may be adjusted as necessary to accommodate the timely completion of discussion relevant to the assessment process. Such adjustments may result in the meeting being extended from or completed prior to the time established by this notice. Additional SEDAR 66 webinar dates and times will publish in a subsequent issue in the Federal Register. ADDRESSES: Meeting address: The SEDAR 66 South Atlantic Tilefish Assessment Webinar III will be held via webinar. The webinar is open to members of the public. Registration is available online jbell on DSKJLSW7X2PROD with NOTICES SUMMARY: VerDate Sep<11>2014 19:27 Jan 21, 2021 Jkt 253001 at: https://attendee.gotowebinar.com/ register/5508517383600709904. SEDAR address: South Atlantic Fishery Management Council, 4055 Faber Place Drive, Suite 201, North Charleston, SC 29405; www.sedarweb.org. FOR FURTHER INFORMATION CONTACT: Kathleen Howington, SEDAR Coordinator, 4055 Faber Place Drive, Suite 201, North Charleston, SC 29405; phone: (843) 571–4366; email: Kathleen.howington@safmc.net. SUPPLEMENTARY INFORMATION: The Gulf of Mexico, South Atlantic, and Caribbean Fishery Management Councils, in conjunction with NOAA Fisheries and the Atlantic and Gulf States Marine Fisheries Commissions, have implemented the Southeast Data, Assessment and Review (SEDAR) process, a multi-step method for determining the status of fish stocks in the Southeast Region. SEDAR is a threestep process including: (1) Data Workshop; (2) Assessment Process utilizing webinars; and (3) Review Workshop. The product of the Data Workshop is a data report which compiles and evaluates potential datasets and recommends which datasets are appropriate for assessment analyses. The product of the Assessment Process is a stock assessment report which describes the fisheries, evaluates the status of the stock, estimates biological benchmarks, projects future population conditions, and recommends research and monitoring needs. The assessment is independently peer reviewed at the Review Workshop. The product of the Review Workshop is a Summary documenting panel opinions regarding the strengths and weaknesses of the stock assessment and input data. Participants for SEDAR Workshops are appointed by the Gulf of Mexico, South Atlantic, and Caribbean Fishery Management Councils and NOAA Fisheries Southeast Regional Office, Highly Migratory Species Management Division, and Southeast Fisheries Science Center. Participants include: Data collectors and database managers; stock assessment scientists, biologists, and researchers; constituency representatives including fishermen, environmentalists, and nongovernmental organizations (NGOs); international experts; and staff of Councils, Commissions, and state and federal agencies. The items of discussion at the SEDAR 66 South Atlantic Tilefish Assessment Webinar III are as follows: • Finalize discussion on base model configuration, sensitivity runs, and projections PO 00000 Frm 00023 Fmt 4703 Sfmt 4703 Although non-emergency issues not contained in this agenda may come before this group for discussion, those issues may not be the subject of formal action during this meeting. Action will be restricted to those issues specifically identified in this notice and any issues arising after publication of this notice that require emergency action under section 305(c) of the Magnuson-Stevens Fishery Conservation and Management Act, provided the public has been notified of the intent to take final action to address the emergency. Special Accommodations This meeting is accessible to people with disabilities. Requests for auxiliary aids should be directed to the SAFMC office (see ADDRESSES) at least 10 business days prior to the meeting. Note: The times and sequence specified in this agenda are subject to change. Authority: 16 U.S.C. 1801 et seq. Dated: January 15, 2021. Rey Israel Marquez, Acting Deputy Director, Office of Sustainable Fisheries, National Marine Fisheries Service. [FR Doc. 2021–01391 Filed 1–21–21; 8:45 am] BILLING CODE 3510–22–P DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration Agency Information Collection Activities; Submission to the Office of Management and Budget (OMB) for Review and Approval; Comment Request; Fishery Capacity Reduction Program Buyback Requests National Oceanic & Atmospheric Administration (NOAA), Commerce. ACTION: Notice of Information Collection, request for comment. AGENCY: The Department of Commerce, in accordance with the Paperwork Reduction Act of 1995 (PRA), invites the general public and other Federal agencies to comment on proposed, and continuing information collections, which helps us assess the impact of our information collection requirements and minimize the public’s reporting burden. The purpose of this notice is to allow for 60 days of public comment preceding submission of the collection to OMB. DATES: To ensure consideration, comments regarding this proposed information collection must be received on or before March 23, 2021. SUMMARY: E:\FR\FM\22JAN1.SGM 22JAN1

Agencies

[Federal Register Volume 86, Number 13 (Friday, January 22, 2021)]
[Notices]
[Pages 6630-6634]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-01370]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[C-570-968]


Aluminum Extrusions From the People's Republic of China: Final 
Results of Countervailing Duty Administrative Review and Rescission of 
Review, in Part; 2018

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.
SUMMARY: The Department of Commerce (Commerce) has completed its 
administrative review of the countervailing duty (CVD) order on 
aluminum extrusions from the People's Republic of China (China) for the 
period of review (POR) January 1, 2018 through December 31, 2018, and 
determines that countervailable subsidies are being provided to 
producers and exporters of aluminum extrusions. The final net 
countervailable subsidy rates are listed below in the section titled 
``Final Results of Administrative Review.''

DATES: Applicable January 22, 2021.

FOR FURTHER INFORMATION CONTACT: Davina Friedmann, AD/CVD Operations, 
Office VI, Enforcement and Compliance, International Trade 
Administration, U.S. Department of Commerce, 1401 Constitution Avenue 
NW, Washington, DC 20230; telephone: (202) 482-0698.

SUPPLEMENTARY INFORMATION:

Background

    Commerce published the Preliminary Results of this administrative 
review in the Federal Register on August 5, 2020.\1\ We invited parties 
to comment on the Preliminary Results. No interested party submitted 
comments or requested a hearing in this administrative review. On April 
24, 2020, Commerce tolled all deadlines in administrative reviews by 50 
days.\2\ On July 21, 2020, Commerce tolled all deadlines in 
administrative reviews by an additional 60 days,\3\ thereby extending 
the deadline for these final results until January 19, 2021. Commerce 
conducted this review in accordance with section 751(a)(1)(A) of the 
Tariff Act of 1930, as amended (the Act).
---------------------------------------------------------------------------

    \1\ See Aluminum Extrusions from the People's Republic of China: 
Preliminary Results of the Countervailing Duty Administrative 
Review, Rescission of Review, in Part, and Intent to Rescind, in 
Part; 2018, 85 FR 47349 (August 5, 2020) (Preliminary Results), and 
accompanying Preliminary Decision Memorandum.
    \2\ See Memorandum, ``Tolling of Deadlines for Antidumping and 
Countervailing Duty Administrative Reviews in Response to 
Operational Adjustments Due to COVID-19,'' dated April 24, 2020.
    \3\ See Memorandum, ``Tolling of Deadlines for Antidumping and 
Countervailing Duty Administrative Reviews,'' dated July 21, 2020.
---------------------------------------------------------------------------

Scope of the Order

    The merchandise covered by the order is aluminum extrusions from 
China. The complete description of the scope is provided at Appendix I 
of this notice.

Changes Since the Preliminary Results

    As no party submitted comments on the Preliminary Results, Commerce 
made no changes for these final results of review.

Rescission of Review

    In the Preliminary Results, we stated our intention to rescind the 
review with respect to companies named in the Initiation Notice for 
which all review requests were timely withdrawn in accordance with 19 
CFR 351.213(d)(1). These companies are listed in Appendix II of this 
notice. For these companies, Commerce is rescinding the administrative 
review and will assess duties at rates equal to the rates of the cash 
deposits for estimated countervailing duties required at the time of 
entry, or withdrawn from warehouse, for consumption, during the POR, in 
accordance with 19 CFR 351.212(c)(1).\4\
---------------------------------------------------------------------------

    \4\ See Preliminary Results, 85 FR 47349, 47350.

---------------------------------------------------------------------------

[[Page 6631]]

Final Results of Administrative Review

    In accordance with 19 CFR 351.221(b)(5), we determine the following 
final net subsidy rates for the 2018 administrative review: \5\
---------------------------------------------------------------------------

    \5\ See Preliminary Results; see also Memorandum, 
``Administrative Review of Countervailing Duty Order on Aluminum 
Extrusions from the People's Republic of China: AFA Calculation 
Memorandum for the Preliminary Results of Review; 2018,'' dated 
August 28, 2020.

------------------------------------------------------------------------
                                                               Final  ad
                                                                valorem
                           Company                               rate
                                                               (percent)
------------------------------------------------------------------------
Activa International Inc....................................      242.15
Changzou Tenglong Auto Parts Co. Ltd........................       16.08
CRRC Changzhou Auto Parts Co. Ltd...........................      242.15
Dongguan Aoda Aluminum Co. Ltd..............................       16.08
Guangdong Xingfa Aluminum Co., Ltd..........................      242.15
Precision Metal Works Ltd...................................      242.15
------------------------------------------------------------------------

Assessment Rates

    In accordance with 19 CFR 351.212(b)(2), Commerce intends to issue 
appropriate assessment instructions to U.S. Customs and Border 
Protection (CBP) 15 days after publication of these final results of 
review, to liquidate shipments of subject merchandise produced and/or 
exported by the companies listed above, entered, or withdrawn from 
warehouse, for consumption on or after January 1, 2018 through December 
31, 2018, at the ad valorem rates listed above.

Cash Deposit Requirements

    In accordance with section 751(a)(1) of the Act, Commerce will 
instruct CBP to collect cash deposits of estimated countervailing 
duties in the amounts shown for each of the respective companies listed 
above for shipments of subject merchandise entered, or withdrawn from 
warehouse, for consumption on or after the date of publication of these 
final results of review. For all non-reviewed firms, we will instruct 
CBP to collect cash deposits of estimated countervailing duties at the 
most recent company-specific or all-others rate applicable to the 
company, as appropriate. These cash deposit requirements, when imposed, 
shall remain in effect until further notice.

Administrative Protective Order

    This notice serves as a reminder to parties subject to 
administrative protective order (APO) of their responsibility 
concerning the destruction of proprietary information disclosed under 
APO in accordance with 19 CFR 351.305(a)(3), which continues to govern 
business proprietary information in this segment of the proceeding. 
Timely written notification of return or destruction of APO materials 
or conversion to judicial protective order is hereby requested. Failure 
to comply with the regulations and the terms of an APO is a 
sanctionable violation.

Notification to Interested Parties

    We are issuing and publishing these results in accordance with 
sections 751(a)(1) and 777(i)(1) of the Act.

    Dated: January 13, 2021.
Jeffrey I. Kessler,
Assistant Secretary for Enforcement and Compliance.

Appendix I

Scope of the Order

    The merchandise covered by the order{s{time}  is aluminum 
extrusions which are shapes and forms, produced by an extrusion 
process, made from aluminum alloys having metallic elements 
corresponding to the alloy series designations published by The 
Aluminum Association commencing with the numbers 1, 3, and 6 (or 
proprietary equivalents or other certifying body equivalents). 
Specifically, the subject merchandise made from aluminum alloy with 
an Aluminum Association series designation commencing with the 
number 1 contains not less than 99 percent aluminum by weight. The 
subject merchandise made from aluminum alloy with an Aluminum 
Association series designation commencing with the number 3 contains 
manganese as the major alloying element, with manganese accounting 
for not more than 3.0 percent of total materials by weight. The 
subject merchandise is made from an aluminum alloy with an Aluminum 
Association series designation commencing with the number 6 contains 
magnesium and silicon as the major alloying elements, with magnesium 
accounting for at least 0.1 percent but not more than 2.0 percent of 
total materials by weight, and silicon accounting for at least 0.1 
percent but not more than 3.0 percent of total materials by weight. 
The subject aluminum extrusions are properly identified by a four-
digit alloy series without either a decimal point or leading letter. 
Illustrative examples from among the approximately 160 registered 
alloys that may characterize the subject merchandise are as follows: 
1350, 3003, and 6060.
    Aluminum extrusions are produced and imported in a wide variety 
of shapes and forms, including, but not limited to, hollow profiles, 
other solid profiles, pipes, tubes, bars, and rods.
    Aluminum extrusions that are drawn subsequent to extrusion 
(drawn aluminum) are also included in the scope.
    Aluminum extrusions are produced and imported with a variety of 
finishes (both coatings and surface treatments), and types of 
fabrication. The types of coatings and treatments applied to subject 
aluminum extrusions include, but are not limited to, extrusions that 
are mill finished (i.e., without any coating or further finishing), 
brushed, buffed, polished, anodized (including brightdip anodized), 
liquid painted, or powder coated. Aluminum extrusions may also be 
fabricated, i.e., prepared for assembly. Such operations would 
include, but are not limited to, extrusions that are cut-to-length, 
machined, drilled, punched, notched, bent, stretched, knurled, 
swedged, mitered, chamfered, threaded, and spun. The subject 
merchandise includes aluminum extrusions that are finished (coated, 
painted, etc.), fabricated, or any combination thereof.
    Subject aluminum extrusions may be described at the time of 
importation as parts for final finished products that are assembled 
after importation, including, but not limited to, window frames, 
door frames, solar panels, curtain walls, or furniture. Such parts 
that otherwise meet the definition of aluminum extrusions are 
included in the scope. The scope includes the aluminum extrusion 
components that are attached (e.g., by welding or fasteners) to form 
subassemblies, i.e., partially assembled merchandise unless imported 
as part of the finished goods `kit' defined further below. The scope 
does not include the non-aluminum extrusion components of 
subassemblies or subject kits.
    Subject extrusions may be identified with reference to their end 
use, such as fence posts, electrical conduits, door thresholds, 
carpet trim, or heat sinks (that do not meet the finished heat sink 
exclusionary language below). Such goods are subject merchandise if 
they otherwise meet the scope definition, regardless of whether they 
are ready for use at the time of importation.
    The following aluminum extrusion products are excluded: aluminum 
extrusions made from aluminum alloy with an Aluminum Association 
series designations commencing with the number 2 and containing in 
excess of 1.5 percent copper by weight; aluminum extrusions made 
from aluminum alloy with an Aluminum Association series designation 
commencing with the number 5 and containing in excess of 1.0 percent 
magnesium by weight; and aluminum extrusions made from aluminum 
alloy with an Aluminum Association series designation commencing 
with the number 7 and containing in excess of 2.0 percent zinc by 
weight.
    The scope also excludes finished merchandise containing aluminum 
extrusions as parts that are fully and permanently assembled and 
completed at the time of entry, such as finished windows with glass, 
doors with glass or vinyl, picture frames with glass pane and 
backing material, and solar panels. The scope also excludes finished 
goods containing aluminum extrusions that are entered unassembled in 
a ``finished goods kit.'' A finished goods kit is understood to mean 
a packaged combination of parts that contains, at the time of 
importation, all of the necessary parts to fully assemble a final 
finished good and requires no further finishing or fabrication, such 
as cutting or punching, and is assembled ``as is'' into a finished 
product. An imported product will not be considered a ``finished 
goods kit'' and therefore excluded from the scope of the

[[Page 6632]]

order{s{time}  merely by including fasteners such as screws, bolts, 
etc. in the packaging with an aluminum extrusion product.
    The scope also excludes aluminum alloy sheet or plates produced 
by other than the extrusion process, such as aluminum products 
produced by a method of casting. Cast aluminum products are properly 
identified by four digits with a decimal point between the third and 
fourth digit. A letter may also precede the four digits. The 
following Aluminum Association designations are representative of 
aluminum alloys for casting: 208.0, 295.0, 308.0, 355.0, C355.0, 
356.0, A356.0, A357.0, 360.0, 366.0, 380.0, A380.0, 413.0, 443.0, 
514.0, 518.1, and 712.0. The scope also excludes pure, unwrought 
aluminum in any form.
    The scope also excludes collapsible tubular containers composed 
of metallic elements corresponding to alloy code 1080A as designated 
by the Aluminum Association where the tubular container (excluding 
the nozzle) meets each of the following dimensional characteristics: 
(1) Length of 37 millimeters (``mm'') or 62 mm, (2) outer diameter 
of 11.0 mm or 12.7 mm, and (3) wall thickness not exceeding 0.13 mm.
    Also excluded from the scope of these order{s{time}  are 
finished heat sinks. Finished heat sinks are fabricated heat sinks 
made from aluminum extrusions the design and production of which are 
organized around meeting certain specified thermal performance 
requirements and which have been fully, albeit not necessarily 
individually, tested to comply with such requirements.
    Also excluded from the scope of the order{s{time}  is certain 
rectangular wire produced from continuously cast rolled aluminum 
wire rod, which is subsequently extruded to dimension to form 
rectangular wire. The product is made from aluminum alloy grade 1070 
or 1370, with no recycled metal content allowed. The dimensions of 
the wire are 5 mm (+/- 0.05 mm) in width and 1.0 mm (+/- 0.02 mm) in 
thickness. Imports of rectangular wire are provided for under HTSUS 
category 7605.19.000.
    Imports of the subject merchandise are provided for under the 
following categories of the Harmonized Tariff Schedule of the United 
States (HTSUS): 7606.12.3091, 7606.12.3096, 7604.21.0010, 
7604.21.0090, 7604.29.1010, 7604.29.1090, 7604.29.3060; 
7604.29.3090; 7604.29.5050; 7604.29.5090; 8541.90.00.00, 
8708.10.30.50, 8708.99.68.90, 6603.90.8100, 7616.99.51, 8479.89.94, 
8481.90.9060, 8481.90.9085, 9031.90.9195, 8424.90.9080, 
9405.99.4020, 9031.90.90.95, 7616.10.90.90, 7609.00.00, 7610.10.00, 
7610.90.00, 7615.10.30, 7615.10.71, 7615.10.91, 7615.19.10, 
7615.19.30, 7615.19.50, 7615.19.70, 7615.19.90, 7615.20.00, 
7616.99.10, 7616.99.50, 8479.89.98, 8479.90.94, 8513.90.20, 
9403.10.00, 9403.20.00, 7604.21.00.00, 7604.29.10.00, 7604.29.30.10, 
7604.29.30.50, 7604.29.50.30, 7604.29.50.60, 7608.20.00.30, 
7608.20.00.90, 8302.10.30.00, 8302.10.60.30, 8302.10.60.60, 
8302.10.60.90, 8302.20.00.00, 8302.30.30.10, 8302.30.30.60, 
8302.41.30.00, 8302.41.60.15, 8302.41.60.45, 8302.41.60.50, 
8302.41.60.80, 8302.42.30.10, 8302.42.30.15, 8302.42.30.65, 
8302.49.60.35, 8302.49.60.45, 8302.49.60.55, 8302.49.60.85, 
8302.50.00.00, 8302.60.90.00, 8305.10.00.50, 8306.30.00.00, 
8414.59.60.90, 8415.90.80.45, 8418.99.80.05, 8418.99.80.50, 
8418.99.80.60, 8419.90.10.00, 8422.90.06.40, 8473.30.20.00, 
8473.30.51.00, 8479.90.85.00, 8486.90.00.00, 8487.90.00.80, 
8503.00.95.20, 8508.70.00.00, 8515.90.20.00, 8516.90.50.00, 
8516.90.80.50, 8517.70.00.00, 8529.90.73.00, 8529.90.97.60, 
8536.90.80.85, 8538.10.00.00, 8543.90.88.80, 8708.29.50.60, 
8708.80.65.90, 8803.30.00.60, 9013.90.50.00, 9013.90.90.00, 
9401.90.50.81, 9403.90.10.40, 9403.90.10.50, 9403.90.10.85, 
9403.90.25.40, 9403.90.25.80, 9403.90.40.05, 9403.90.40.10, 
9403.90.40.60, 9403.90.50.05, 9403.90.50.10, 9403.90.50.80, 
9403.90.60.05, 9403.90.60.10, 9403.90.60.80, 9403.90.70.05, 
9403.90.70.10, 9403.90.70.80, 9403.90.80.10, 9403.90.80.15, 
9403.90.80.20, 9403.90.80.41, 9403.90.80.51, 9403.90.80.61, 
9506.11.40.80, 9506.51.40.00, 9506.51.60.00, 9506.59.40.40, 
9506.70.20.90, 9506.91.00.10, 9506.91.00.20, 9506.91.00.30, 
9506.99.05.10, 9506.99.05.20, 9506.99.05.30, 9506.99.15.00, 
9506.99.20.00, 9506.99.25.80, 9506.99.28.00, 9506.99.55.00, 
9506.99.60.80, 9507.30.20.00, 9507.30.40.00, 9507.30.60.00, 
9507.90.60.00, and 9603.90.80.50.
    The subject merchandise entered as parts of other aluminum 
products may be classifiable under the following additional Chapter 
76 subheadings: 7610.10, 7610.90, 7615.19, 7615.20, and 7616.99, as 
well as under other HTSUS chapters. In addition, fin evaporator 
coils may be classifiable under HTSUS numbers: 8418.99.80.50 and 
8418.99.80.60. While HTSUS subheadings are provided for convenience 
and customs purposes, the written description of the scope of these 
order{s{time}  is dispositive.

Appendix II

List of Companies for Which We Are Rescinding This Administrative 
Review

    1. Acro Import and Export Co.
    2. Activa Leisure Inc.
    3. Agilent Technologies Co. Ltd (China)
    4. Allied Maker Limited
    5. Alnan Aluminum Co., Ltd.
    6. Alnan Aluminum Ltd.
    7. Aluminicaste Fundicion de Mexico
    8. AMC Limited
    9. AMC Ltd.
    10. Anji Chang Hong Chain Manufacturing
    11. Anshan Zhongda Industry Co., Ltd.
    12. Aoda Aluminium (Hong Kong) Co., Limited
    13. AsiaAlum Group
    14. Atlas Integrated Manufacturing Ltd.
    15. Bath Fitter
    16. Behr-Hella Thermocontrol (Shanghai) Co. Ltd.
    17. Belton (Asia) Development Limited
    18. Belton (Asia) Development Ltd.
    19. Birchwoods (Lin'an) Leisure Products Co., Ltd.
    20. Bolnar Hong Kong Ltd.
    21. Bracalente Metal Products (Suzhou) Co., Ltd.
    22. Brilliance General Equipment Co., Ltd.
    23. Changshu Changshen Aluminum Products Co., Ltd.
    24. Changshu Changsheng Aluminum Products Co., Ltd.
    25. Changzhou Changzheng Evaporator Co., Ltd.
    26. Changzhou Changzhen Evaporator Co., Ltd.
    27. Changzhou Tenglong Auto Accessories Manufacturing Co. Ltd.
    28. Changzhou Tenglong Auto Parts Co. Ltd.
    29. China Square
    30. China Square Industrial Co.
    31. China Square Industrial Ltd.
    32. China Zhongwang Holdings, Ltd.
    33. Chiping One Stop Industrial & Trade Co., Ltd.
    34. Classic & Contemporary Inc.
    35. Clear Sky Inc.
    36. Coclisa S.A. de C.V.
    37. Cosco (J.M.) Aluminum Co., Ltd.
    38. Cosco (J.M.) Aluminum Development Co. Ltd.
    39. Dalian Huacheng Aquatic Products
    40. Dalian Liwang Trade Co., Ltd.
    41. Danfoss Micro Channel Heat Exchanger (Jia Xing) Co., Ltd.
    42. Daya Hardware Co Ltd.
    43. Dongguan Dazhan Metal Co., Ltd.
    44. Dongguan Golden Tiger Hardware Industrial Co., Ltd.
    45. Dongguang Aoda Aluminum Co., Ltd.
    46. Dragonluxe Limited
    47. Dynabright International Group (HK) Ltd.
    48. Dynamic Technologies China
    49. ETLA Technology (Wuxi) Co. Ltd.
    50. Ever Extend Ent. Ltd.
    51. Fenghua Metal Product Factory
    52. First Union Property Limited
    53. FookShing Metal & Plastic Co. Ltd.
    54. Foreign Trade Co. of Suzhou New & High-Tech Industrial 
Development Zone
    55. Foshan City Nanhai Hongjia Aluminum Alloy Co., Ltd.
    56. Foshan Golden Source Aluminum Products Co., Ltd.
    57. Foshan Guangcheng Aluminium Co., Ltd.
    58. Foshan Jinlan Aluminum Co. Ltd.
    59. Foshan JinLan Aluminum Co., Ltd.
    60. Foshan JMA Aluminum Company Limited
    61. Foshan Nanhai Niu Yuan Hardware Product Co., Ltd.
    62. Foshan Shunde Aoneng Electrical Appliances Co., Ltd.
    63. Foshan Shanshui Fenglu Aluminum Co., Ltd.
    64. Foshan Yong Li Jian Aluminum Co., Ltd.
    65. Fujian Sanchuan Aluminum Co., Ltd.
    66. Fukang Aluminum & Plastic Import and Export Co., Ltd.
    67. Fuzhou Sunmodo New Energy Equipment
    68. Gaotang Xinhai Economy & Trade Co., Ltd.
    69. Genimex Shanghai, Ltd.
    70. Global Hi-Tek Precision Co. Ltd
    71. Global PMX Dongguan Co., Ltd.
    72. Global Point Technology (Far East) Limited
    73. Golden Dragon Precise Copper Tube Group, Inc.
    74. Gold Mountain International Development, Ltd.
    75. Gran Cabrio Capital Pte. Ltd.
    76. Gree Electric Appliances
    77. Green Line Hose & Fittings
    78. GT88 Capital Pte. Ltd.

[[Page 6633]]

    79. Guang Ya Aluminium Industries (HK) Ltd.
    80. Guang Ya Aluminium Industries Co. Ltd.
    81. Guang Ya Aluminum Industries Company Ltd.
    82. Guangcheng Aluminum Co., Ltd.
    83. Guangdong Hao Mei Aluminum Co., Ltd.
    84. Guangdong Jianmei Aluminum Profile Company Limited
    85. Guangdong JMA Aluminum Profile Factory (Group) Co., Ltd.
    86. Guangdong Midea
    87. Guangdong Midea Microwave and Electrical Appliances
    88. Guangdong Nanhai Foodstuffs Imp. & Exp. Co., Ltd.
    89. Guangdong Weiye Aluminum Factory Co., Ltd.
    90. Guangdong Whirlpool Electrical Appliances Co., Ltd.
    91. Guangdong Xin Wei Aluminum Products Co., Ltd.
    92. Guangdong Yonglijian Aluminum Co., Ltd.
    93. Guangdong Zhongya Aluminum Company Ltd.
    94. Guangzhou Jangho Curtain Wall System Engineering Co., Ltd.
    95. Guangzhou Mingcan Die-Casting Hardware Products Co., Ltd.
    96. Hangzhou Xingyi Metal Products Co., Ltd.
    97. Hanwood Enterprises Limited
    98. Hanyung Alcoba Co., Ltd.
    99. Hanyung Alcobis Co., Ltd.
    100. Hanyung Metal (Suzhou) Co., Ltd.
    101. Hao Mei Aluminum Co., Ltd.
    102. Hao Mei Aluminum International Co., Ltd.
    103. Hebei Xusen Wire Mesh Products Co., Ltd.
    104. Henan New Kelong Electrical Appliances Co., Ltd.
    105. Henan Zhongduo Aluminum Magnesium New Material Co., Ltd.
    106. Hitachi High-Technologies (Shanghai) Co., Ltd.
    107. Hong Kong Gree Electric Appliances Sales Limited
    108. Hong Kong Modern Non-Ferrous Metal
    109. Honsense Development Company
    110. Hui Mei Gao Aluminum Foshan Co., Ltd.
    111. Huixin Aluminum
    112. IDEX Dinglee Technology (Tianjin) Co., Ltd.
    113. IDEX Health
    114. IDEX Technology Suzhou Co., Ltd.
    115. Innovative Aluminum (Hong Kong) Limited
    116. iSource Asia
    117. Jackson Travel Products Co., Ltd.
    118. Jangho Curtain Wall Hong Kong Ltd.
    119. Jiangmen Jianghai Foreign Ent. Gen.
    120. Jiangmen Jianghai District Foreign Economic Enterprise 
Corp. Ltd.
    121. Jiangmen Qunxing Hardware Diecasting Co., Ltd.
    122. Jiangsu Changfa Refrigeration Co.
    123. Jiangyin Suncitygaylin
    124. Jiangyin Trust International Inc.
    125. Jiangyin Xinhong Doors and Windows Co., Ltd.
    126. Jiaxing Jackson Travel Products Co., Ltd.
    127. Jiaxing Taixin Metal Products Co., Ltd.
    128. Jiuyan Co., Ltd.
    129. JMA (HK) Company Limited
    130. Johnson Precision Engineering (Suzhou) Co., Ltd.
    131. Justhere Co., Ltd.
    132. Kam Kiu Aluminum Products Sdn Bhd
    133. Kanal Precision Aluminum Product Co., Ltd.
    134. Karlton Aluminum Company Ltd.
    135. Kong Ah International Company Limited
    136. Kromet International
    137. Kromet International Inc.
    138. Kromet Intl Inc.
    139. Kunshan Giant Light Metal Technology Co., Ltd.
    140. Liaoning Zhong Da Industrial Aluminum Co., Ltd.
    141. Liaoning Zhongwang Group Co., Ltd.
    142. Liaoyang Zhongwang Aluminum Profile Co. Ltd.
    143. Longkou Donghai Trade Co., Ltd.
    144. MAAX Bath Inc.
    145. MAHLE Holding (China) Co., Ltd.
    146. Metal Tech Co Ltd.
    147. Metaltek Group Co., Ltd.
    148. Metaltek Metal Industry Co., Ltd.
    149. Midea Air Conditioning Equipment Co., Ltd.
    150. Midea Electric Trading Co., Pte Ltd.
    151. Midea International Trading Co., Ltd.
    152. Midea International Training Co., Ltd.
    153. Miland Luck Limited
    154. Nanhai Textiles Import & Export Co., Ltd.
    155. New Asia Aluminum & Stainless Steel Product Co., Ltd.
    156. New Zhongya Aluminum Factory
    157. Nidec Sankyo Singapore Pte. Ltd.
    158. Nidec Sankyo (Zhejang) Corporation
    159. Nidec Sankyo Zhejiang Corporation
    160. Ningbo Coaster International Co., Ltd.
    161. Ningbo Hi Tech Reliable Manufacturing Company
    162. Ningbo Innopower Tengda Machinery
    163. Ningbo Ivy Daily Commodity Co., Ltd.
    164. Ningbo Yili Import and Export Co., Ltd.
    165. North China Aluminum Co., Ltd.
    166. North Fenghua Aluminum Ltd.
    167. Northern States Metals
    168. PanAsia Aluminum (China) Limited
    169. PENCOM Dongguan China
    170. Pengcheng Aluminum Enterprise Inc.
    171. Permasteelisa Hong Kong Ltd.
    172. Permasteelisa South China Factory
    173. Pingguo Aluminum Company Limited
    174. Pingguo Asia Aluminum Co., Ltd.
    175. Popular Plastics Company Limited
    176. Press Metal International Ltd.
    177. Qingdao Sea Nova Building
    178. Samuel, Son & Co., Ltd.
    179. Sanchuan Aluminum Co., Ltd.
    180. Sanhua (Hangzhou) Micro Channel Heat Exchanger Co., Ltd.
    181. Shandong Fukang Aluminum & Plastic Co. Ltd.
    182. Shandong Huajian Aluminum Group
    183. Shangdong Huasheng Pesticide Machinery Co.
    184. Shangdong Nanshan Aluminum Co., Ltd.
    185. Shanghai Automobile Air Conditioner Accessories Ltd.
    186. Shanghai Automobile Air-Conditioner Accessories Co Ltd.
    187. Shanghai Canghai Aluminum Tube Packaging Co., Ltd.
    188. Shanghai Dofiberone Composites Co. Ltd.
    189. Shanghai Dongsheng Metal
    190. Shanghai Shen Hang Imp & Exp Co., Ltd.
    191. Shanghai Tongtai Precise Aluminum Alloy Manufacturing Co. 
Ltd.
    192. Shanghai Top-Ranking Aluminum Products Co., Ltd.
    193. Shanghai Top-Ranking New Materials Co., Ltd.
    194. Shenzhen Hudson Technology Development Co.
    195. Shenzhen Jiuyuan Co., Ltd.
    196. Sihui Shi Guo Yao Aluminum Co., Ltd.
    197. Sincere Profit
    198. Skyline Exhibit Systems (Shanghai) Co. Ltd.
    199. Southwest Aluminum (Group) Co., Ltd.
    200. Springs Window Fashions De Victoria
    201. Summit Plastics Nanjing Co. Ltd.
    202. Suzhou JRP Import & Export Co., Ltd.
    203. Suzhou New Hongji Precision Part Co.
    204. Tai-Ao Aluminum (Taishan) Co. Ltd.
    205. Taishan City Kam Kiu Aluminium Extrusion Co., Ltd.
    206. Taitoh Machinery Shanghai Co. Ltd.
    207. Taizhou Lifeng Manufacturing Co., Ltd.
    208. Taizhou United Imp. & Exp. Co., Ltd.
    209. tenKsolar (Shanghai) Co., Ltd.
    210. Tianjin Ganglv Nonferrous Metal Materials Co., Ltd.
    211. Tianjin Jinmao Import & Export Corp., Ltd.
    212. Tianjin Ruxin Electric Heat Transmission Technology Co., 
Ltd.
    213. Tianjin Xiandai Plastic & Aluminum Products Co., Ltd.
    214. Tiazhou Lifeng Manufacturing Corporation
    215. Top-Wok Metal Co., Ltd.
    216. Traffic Brick Network, LLC
    217. Union Aluminum (SIP) Co.
    218. Union Industry (Asia) Co., Ltd.
    219. USA Worldwide Door Components (Pinghu) Co., Ltd.
    220. Wenzhou Shengbo Decoration & Hardware
    221. Whirlpool Canada L.P.
    222. Whirlpool (Guangdong)
    223. Whirlpool Microwave Products Development Ltd.
    224. Wonjin Autoparts
    225. Worldwide Door Components, Inc.
    226. WTI Building Products, Ltd.
    227. Wuxi Lutong Fiberglass Doors Co., Ltd.
    228. Xinchang Yongqiang Air Conditioning Accessories Co., Ltd.
    229. Xin Wei Aluminum Co.
    230. Xin Wei Aluminum Company Limited
    231. Xinya Aluminum & Stainless Steel Product Co., Ltd.
    232. Yuyao Fanshun Import & Export Co., Ltd.
    233. Yuyao Haoshen Import & Export
    234. Zahoqing China Square Industry Limited

[[Page 6634]]

    235. Zhaoqing Asia Aluminum Factory Company Ltd.
    236. Zhaoqing China Square Industrial Ltd.
    237. Zhaoqing China Square Industry Limited
    238. Zhaoqing New Zhongya Aluminum Co., Ltd.
    239. Zhejiang Anji Xinxiang Aluminum Co., Ltd.
    240. Zhejiang Lilies Industrial and Commercial Co.
    241. Zhejiang Yili Automobile Air Condition Co., Ltd.
    242. Zhejiang Yongkang Listar Aluminum Industry Co., Ltd.
    243. Zhejiang Zhengte Group Co., Ltd.
    244. Zhenjiang Xinlong Group Co., Ltd.
    245. Zhongshan Daya Hardware Co., Ltd.
    246. Zhongshan Gold Mountain Aluminum Factory Ltd.
    247. Zhongya Shaped Aluminum (HK) Holding Limited
    248. Zhuhai Runxingtai Electrical Equipment Co., Ltd.

[FR Doc. 2021-01370 Filed 1-21-21; 8:45 am]
BILLING CODE 3510-DS-P