Powered Industrial Trucks Standard; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements, 65876-65878 [2020-22884]

Download as PDF jbell on DSKJLSW7X2PROD with NOTICES 65876 Federal Register / Vol. 85, No. 201 / Friday, October 16, 2020 / Notices (PRA). Public comments on the ICR are invited. DATES: The OMB will consider all written comments that agency receives on or before November 16, 2020. ADDRESSES: Written comments and recommendations for the proposed information collection should be sent within 30 days of publication of this notice to www.reginfo.gov/public/do/ PRAMain. Find this particular information collection by selecting ‘‘Currently under 30-day Review—Open for Public Comments’’ or by using the search function. Comments are invited on: (1) Whether the collection of information is necessary for the proper performance of the functions of the Department, including whether the information will have practical utility; (2) if the information will be processed and used in a timely manner; (3) the accuracy of the agency’s estimates of the burden and cost of the collection of information, including the validity of the methodology and assumptions used; (4) ways to enhance the quality, utility and clarity of the information collection; and (5) ways to minimize the burden of the collection of information on those who are to respond, including the use of automated collection techniques or other forms of information technology. FOR FURTHER INFORMATION CONTACT: Anthony May by telephone at 202–693– 4129 (this is not a toll-free number), or by email at DOL_PRA_PUBLIC@dol.gov. SUPPLEMENTARY INFORMATION: Section 101(a), 30 U.S.C. 811(a), allows MSHA to promulgate standards that would require operators to make and retain records from which MSHA would then collect information. Section 103(h), 30 U.S.C. 813(h), of the Federal Mine Safety and Health Act of 1977 (Mine Act), 30 U.S.C. 801 et seq., authorizes MSHA to collect information necessary to carry out its duty in protecting the safety and health of miners. Title 30 CFR 57.3461 requires operators of underground metal and nonmetal mines to develop and implement a rock burst control plan within 90 days after a rock burst has been experienced. For additional substantive information about this ICR, see the related notice published in the Federal Register on May 12, 2020 (85 FR 28038). This information collection is subject to the PRA. A Federal agency generally cannot conduct or sponsor a collection of information, and the public is generally not required to respond to an information collection, unless the OMB approves it and displays a currently valid OMB Control Number. In addition, notwithstanding any other provisions of VerDate Sep<11>2014 18:59 Oct 15, 2020 Jkt 253001 law, no person shall generally be subject to penalty for failing to comply with a collection of information that does not display a valid OMB Control Number. See 5 CFR 1320.5(a) and 1320.6. DOL seeks PRA authorization for this information collection for three (3) years. OMB authorization for an ICR cannot be for more than three (3) years without renewal. The DOL notes that information collection requirements submitted to the OMB for existing ICRs receive a month-to-month extension while they undergo review. Agency: DOL–MSHA. Title of Collection: Rock Burst Control Plan, (Pertains to Underground Metal/ Nonmetal Mines). OMB Control Number: 1219–0097. Affected Public: Private Sector: Businesses or other for-profits. Total Estimated Number of Respondents: 1. Total Estimated Number of Responses: 1. Total Estimated Annual Time Burden: 12. Total Estimated Annual Other Costs Burden: $0. Authority: 44 U.S.C. 3507(a)(1)(D). Dated: October 9, 2020. Anthony May, Management and Program Analyst. [FR Doc. 2020–22936 Filed 10–15–20; 8:45 am] BILLING CODE 4510–43–P DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA–2011–0062] Powered Industrial Trucks Standard; Extension of the Office of Management and Budget’s (OMB) Approval of Information Collection (Paperwork) Requirements Occupational Safety and Health Administration (OSHA), Labor. ACTION: Request for public comments. AGENCY: OSHA solicits public comments concerning the proposal to extend the Office of Management and Budget’s (OMB) approval of the information collection requirements specified in the Powered Industrial Trucks Standard. The information collection requirements address truck design, construction and modification, as well as certification of training and evaluation for truck operators. DATES: Comments must be submitted (postmarked, sent, or received) by December 15, 2020. ADDRESSES: SUMMARY: PO 00000 Frm 00089 Fmt 4703 Sfmt 4703 Electronically: You may submit comments and attachments electronically at https:// www.regulations.gov, which is the Federal eRulemaking Portal. Follow the instructions online for submitting comments. Facsimile: If your comments, including attachments, are not longer than 10 pages you may fax them to the OSHA Docket Office at (202) 693–1648. Mail, hand delivery, express mail, messenger, or courier service: When using this method, you must submit a copy of your comments and attachments to the OSHA Docket Office, Docket No. OSHA–2011–0062, U.S. Department of Labor, Occupational Safety and Health Administration, Room N–3653, 200 Constitution Avenue NW, Washington, DC 20210. Deliveries (hand, express mail, messenger, and courier service) are accepted during the Department of Labor’s and Docket Office’s normal business hours, 10:00 a.m. to 3:00 p.m., ET. Please note: While OSHA’s Docket Office is continuing to accept and process submissions by regular mail, due to the COVID–19 pandemic, the Docket Office is closed to the public and not able to receive submissions to the docket by hand, express mail, messenger, and courier service. Instructions: All submissions must include the agency name and the OSHA docket number (OSHA–2011–0062) for the Information Collection Request (ICR). All comments, including any personal information you provide, such as social security number and date of birth, are placed in the public docket without change, and may be made available online at https:// www.regulations.gov. For further information on submitting comments, see the ‘‘Public Participation’’ heading in the section of this notice titled SUPPLEMENTARY INFORMATION. Docket: To read or download comments or other material in the docket, go to https://www.regulations.gov or the OSHA Docket Office at the address above. All documents in the docket (including this Federal Register notice) are listed in the https:// www.regulations.gov index; however, some information (e.g., copyrighted material) is not publicly available to read or download from the website. All submissions, including copyrighted material, are available for inspection and copying at the OSHA Docket Office. You may also contact Theda Kenney at the address below to obtain a copy of the ICR. FOR FURTHER INFORMATION CONTACT: Seleda Perryman or Theda Kenney, Directorate of Standards and Guidance, E:\FR\FM\16OCN1.SGM 16OCN1 Federal Register / Vol. 85, No. 201 / Friday, October 16, 2020 / Notices OSHA, U.S. Department of Labor; telephone (202) 693–2222. SUPPLEMENTARY INFORMATION: jbell on DSKJLSW7X2PROD with NOTICES I. Background The Department of Labor, as part of the continuing effort to reduce paperwork and respondent (i.e., employer) burden, conducts a preclearance consultation program to provide the public with an opportunity to comment on proposed and continuing information collection requirements in accordance with the Paperwork Reduction Act of 1995 (PRA) (44 U.S.C. 3506(c)(2)(A)). This program ensures that information is in the desired format, reporting burden (time and costs) is minimal, collection instruments are clearly understood, and OSHA’s estimate of the information collection burden is accurate. The Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651 et seq.) authorizes information collection by employers as necessary or appropriate for enforcement of the OSH Act or for developing information regarding the causes and prevention of occupational injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also requires that OSHA obtain such information with minimum burden upon employers, especially those operating small businesses, and to reduce to the maximum extent feasible unnecessary duplication of efforts in obtaining information (29 U.S.C. 657). Paragraph (a)(4) of the Powered Industrial Trucks Standard requires employers to obtain the manufacturer’s written approval before modifying a truck in a manner that affects the capacity and safe operation; if the manufacturer grants such approval, the employer must revise capacity, operation, and maintenance instruction plates, tags, and decals accordingly. For front-end attachments not installed by the manufacturer, paragraph (a)(5) mandates that employers provide a marker on the trucks that identifies the attachment, as well as the weight of both the truck and the attachment when the attachment is at maximum elevation with a laterally centered load. Paragraph (a)(6) specifies that employers must ensure that the markers required by paragraphs (a)(3) through (a)(5) remain affixed to the trucks and are legible. Paragraphs (1)(4) and (1)(6) of the Standard contain the paperwork requirements necessary to certify the evaluation and training provided to powered industrial truck operators. Accordingly, these paragraphs specify the following requirements for employers. VerDate Sep<11>2014 18:59 Oct 15, 2020 Jkt 253001 • Paragraph (1)(4)(iii)—evaluate each operator’s performance at least once every three years. • Paragraph (l)(6)—Certify that each operator meets the training and evaluation requirements specified by paragraph (l). This certification must include the operator’s name, the training date, the evaluation date, and the identity of the individual(s) who performed the training and evaluation. Requiring labels (markings) on modified equipment notifies workers of the conditions under which they can safely operate powered industrial trucks, thereby preventing such hazards as fires and explosions caused by poorly designed electrical systems, rollovers/ tipovers that result from exceeding a truck’s stability characteristics, and falling loads that occur when loads exceed the lifting capacities of attachments. Certification of worker training and evaluation provides a means of informing employers that their workers received the training and demonstrated the performance necessary to operate a truck within the capacity and control limitations. By ensuring that workers operate only trucks that are in proper working order, and do so safely, employers prevent possible severe injury or death of truck operators and other workers who are in the vicinity of the trucks. Finally, these paperwork requirements are the most efficient means for an OSHA compliance officer to determine that an employer properly notified workers about the design and construction of, and modifications made to, the trucks they are operating, and that an employer provided them with the required training. II. Special Issues for Comment OSHA has a particular interest in comments on the following issues: • Whether the proposed information collection requirements are necessary for the proper performance of the agency’s functions, including whether the information is useful; • The accuracy of OSHA’s estimate of the burden (time and costs) of the information collection requirements, including the validity of the methodology and assumptions used; • The quality, utility, and clarity of the information collected; and • Ways to minimize the burden on employers who must comply; for example, by using automated or other technological information collection and transmission techniques. III. Proposed Actions OSHA is proposing to increase the existing burden hour estimate of the PO 00000 Frm 00090 Fmt 4703 Sfmt 4703 65877 collection of information requirements specified by the Standard. In this regard, the agency is proposing to increase the current burden hour estimate from 427,866 hours to 450,023 hours, a total increase of 22,257 hours. An increase in the number of powered industrial truck operators from 1,210,679 to 1,276,055 resulted in this increase. The agency will summarize the comments submitted in response to this notice and will include this summary in the request to OMB. Type of Review: Extension of a currently approved collection. Title: Powered Industrial Trucks (29 CFR 1910.178). OMB Control Number: 1218–0242. Affected Public: Business or other forprofits. Number of Respondents: 1,276,055. Number of Responses: 2,526,588. Frequency of Reponses: On occasion; annually; triennially. Average Time per Response: Ranges from two minutes to mark an approved truck to 30 minutes to perform an evaluation. Estimated Total Burden Hours: 450,023. Estimated Cost (Operation and Maintenance): $256,626. IV. Public Participation—Submission of Comments on this Notice and Internet Access to Comments and Submissions You may submit comments in response to this document as follows: (1) Electronically at https:// www.regulations.gov, which is the Federal eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All comments, attachments, and other materials must identify the agency name and the OSHA docket number for the ICR (Docket No. OSHA–2011–0062). You may supplement electronic submissions by uploading document files electronically. If you wish to mail additional materials in reference to an electronic or facsimile submission, you must submit them to the OSHA Docket Office (see the section of this notice titled ADDRESSES). The additional materials must clearly identify your electronic comments by your name, date, and the docket number so that the agency can attach them to your comments. Because of security procedures, the use of regular mail may cause a significant delay in the receipt of comments. For information about security procedures concerning the delivery of materials by hand, express delivery, messenger, or courier service, please contact the OSHA Docket Office at (202) 693–2350, (TTY (877) 889– 5627). E:\FR\FM\16OCN1.SGM 16OCN1 65878 Federal Register / Vol. 85, No. 201 / Friday, October 16, 2020 / Notices Comments and submissions are posted without change at https:// www.regulations.gov. Therefore, OSHA cautions commenters about submitting personal information such as social security numbers and date of birth. Although all submissions are listed in the https://www.regulations.gov index, some information (e.g., copyrighted material) is not publicly available to read or download from this website. All submissions, including copyrighted material, are available for inspection and copying at the OSHA Docket Office. Information on using the https:// www.regulations.gov website to submit comments and access the docket is available at the website’s ‘‘User Tips’’ link. Contact the OSHA Docket Office for information about materials not available from the website, and for assistance in using the internet to locate docket submissions. V. Authority and Signature Loren Sweatt, Principal Deputy Assistant Secretary of Labor for Occupational Safety and Health, directed the preparation of this notice. The authority for this notice is the Paperwork Reduction Act of 1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor’s Order No. 1–2012 (77 FR 3912). Signed at Washington, DC, on October 9, 2020. Loren Sweatt, Principal Deputy Assistant Secretary of Labor for Occupational Safety and Health. [FR Doc. 2020–22884 Filed 10–15–20; 8:45 am] BILLING CODE 4510–26–P NATIONAL FOUNDATION FOR THE ARTS AND THE HUMANITIES Institute of Museum and Library Services Notice of Proposed Information Collection Request: Evaluation of the Reopening Archives, Libraries, and Museums (REALM) Project Institute of Museum and Library Services, National Foundation for the Arts and the Humanities. ACTION: Notice, request for comments, collection of information. AGENCY: The Institute of Museum and Library Services (IMLS), as part of its continuing effort to reduce paperwork and respondent burden, conducts a preclearance consultation program to provide the general public and federal agencies with an opportunity to comment on proposed and/or continuing collections of information in accordance with the Paperwork jbell on DSKJLSW7X2PROD with NOTICES SUMMARY: VerDate Sep<11>2014 18:59 Oct 15, 2020 Jkt 253001 Reduction Act. This pre-clearance consultation program helps to ensure that requested data can be provided in the desired format, reporting burden (time and financial resources) is minimized, collection instruments are clearly understood, and the impact of collection requirements on respondents can be properly assessed. The purpose of this notice is to solicit comments concerning a plan to conduct a research study entitled ‘‘Evaluation of the Reopening Archives, Libraries, and Museums (REALM) Project’’. A copy of the proposed information collection request can be obtained by contacting the individual listed below in the ADDRESSES section of this notice. DATES: Written comments must be submitted to the office listed in the addressee section below on or before December 11, 2020. ADDRESSES: Send comments to Connie Bodner, Ph.D., Director, Office of Grants Policy and Management, Institute of Museum and Library Services, 955 L’Enfant Plaza North, SW, Suite 4000, Washington, DC 20024–2135. Dr. Bodner can be reached by telephone at 202–653–4636, by email at cbodner@ imls.gov, or by teletype (TTY/TDD) for persons with hearing difficulty at 202– 653–4614. FOR FURTHER INFORMATION CONTACT: Marvin Carr, Ph.D., Senior Advisor, Office of Digital and Information Strategy, Institute of Museum and Library Services, 955 L’Enfant Plaza North, SW, Suite 4000, Washington, DC 20024–2135. Dr. Carr can be reached by telephone at 202–653–4752, by email at mcarr@imls.gov, or by teletype (TTY/ TDD) for persons with hearing difficulty at 202–653–4614. SUPPLEMENTARY INFORMATION: IMLS is particularly interested in comments that help the agency to: • Evaluate whether the proposed collection of information is necessary for the proper performance of the functions of the agency, including whether the information will have practical utility; • Evaluate the accuracy of the agency’s estimate of the burden of the proposed collection of information including the validity of the methodology and assumptions used; • Enhance the quality, utility, and clarity of the information to be collected; and • Minimize the burden of the collection of information on those who are to respond, including through the use of appropriate automated electronic, mechanical, or other technological collection techniques, or other forms of PO 00000 Frm 00091 Fmt 4703 Sfmt 4703 information technology, e.g., permitting electronic submissions of responses. I. Background The Institute of Museum and Library Services is the primary source of federal support for the nation’s libraries and museums. We advance, support, and empower America’s museums, libraries, and related organizations through grant making, research, and policy development. Our vision is a nation where museums and libraries work together to transform the lives of individuals and communities. To learn more, visit www.imls.gov. II. Current Actions The Institute of Museum and Library Services (IMLS) is proposing an evaluation of the Reopening Archives, Libraries, and Museums (REALM) Project. The REALM Project convenes individuals from Institute of Museum and Library Services (IMLS), OCLC Inc. (OCLC), Battelle, and several key actors in the libraries, archives, and museums (LAM) field to bring their expertise and on-the-ground experience together to develop science-based information about how materials can be handled to mitigate COVID–19 exposure to staff and visitors of LAM institutions as COVID–19 restrictions begin lifting across the country. This project extends the guidance available from the Centers for Disease Control and Prevention (CDC) by providing information that is specifically relevant to LAM institutions. Given that LAM institutions work with physical materials that are often circulated among the public, LAM institutions have unique concerns about how they can optimize their operations while minimizing the potential for spreading the Coronavirus. This evaluation will be focused on understanding the extent to which the professionals from LAM institutions have found that the REALM Project’s research test results and toolkit resources have met their needs. Data will be collected through a survey of organizations that have used the test results and toolkit developed by the REALM project. Agency: Institute of Museum and Library Services. Title: Evaluation of the Reopening Archives, Libraries, and Museums Project. OMB Number: 3137–NEW. Agency Number: 3137. Respondents/Affected Public: Staff from library, archive, and museum sectors. Total Estimated Number of Respondents: TBD. E:\FR\FM\16OCN1.SGM 16OCN1

Agencies

[Federal Register Volume 85, Number 201 (Friday, October 16, 2020)]
[Notices]
[Pages 65876-65878]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-22884]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2011-0062]


Powered Industrial Trucks Standard; Extension of the Office of 
Management and Budget's (OMB) Approval of Information Collection 
(Paperwork) Requirements

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Request for public comments.

-----------------------------------------------------------------------

SUMMARY: OSHA solicits public comments concerning the proposal to 
extend the Office of Management and Budget's (OMB) approval of the 
information collection requirements specified in the Powered Industrial 
Trucks Standard. The information collection requirements address truck 
design, construction and modification, as well as certification of 
training and evaluation for truck operators.

DATES: Comments must be submitted (postmarked, sent, or received) by 
December 15, 2020.

ADDRESSES: 
    Electronically: You may submit comments and attachments 
electronically at https://www.regulations.gov, which is the Federal 
eRulemaking Portal. Follow the instructions online for submitting 
comments.
    Facsimile: If your comments, including attachments, are not longer 
than 10 pages you may fax them to the OSHA Docket Office at (202) 693-
1648.
    Mail, hand delivery, express mail, messenger, or courier service: 
When using this method, you must submit a copy of your comments and 
attachments to the OSHA Docket Office, Docket No. OSHA-2011-0062, U.S. 
Department of Labor, Occupational Safety and Health Administration, 
Room N-3653, 200 Constitution Avenue NW, Washington, DC 20210. 
Deliveries (hand, express mail, messenger, and courier service) are 
accepted during the Department of Labor's and Docket Office's normal 
business hours, 10:00 a.m. to 3:00 p.m., ET. Please note: While OSHA's 
Docket Office is continuing to accept and process submissions by 
regular mail, due to the COVID-19 pandemic, the Docket Office is closed 
to the public and not able to receive submissions to the docket by 
hand, express mail, messenger, and courier service.
    Instructions: All submissions must include the agency name and the 
OSHA docket number (OSHA-2011-0062) for the Information Collection 
Request (ICR). All comments, including any personal information you 
provide, such as social security number and date of birth, are placed 
in the public docket without change, and may be made available online 
at https://www.regulations.gov. For further information on submitting 
comments, see the ``Public Participation'' heading in the section of 
this notice titled SUPPLEMENTARY INFORMATION.
    Docket: To read or download comments or other material in the 
docket, go to https://www.regulations.gov or the OSHA Docket Office at 
the address above. All documents in the docket (including this Federal 
Register notice) are listed in the https://www.regulations.gov index; 
however, some information (e.g., copyrighted material) is not publicly 
available to read or download from the website. All submissions, 
including copyrighted material, are available for inspection and 
copying at the OSHA Docket Office. You may also contact Theda Kenney at 
the address below to obtain a copy of the ICR.

FOR FURTHER INFORMATION CONTACT: Seleda Perryman or Theda Kenney, 
Directorate of Standards and Guidance,

[[Page 65877]]

OSHA, U.S. Department of Labor; telephone (202) 693-2222.

SUPPLEMENTARY INFORMATION: 

I. Background

    The Department of Labor, as part of the continuing effort to reduce 
paperwork and respondent (i.e., employer) burden, conducts a 
preclearance consultation program to provide the public with an 
opportunity to comment on proposed and continuing information 
collection requirements in accordance with the Paperwork Reduction Act 
of 1995 (PRA) (44 U.S.C. 3506(c)(2)(A)). This program ensures that 
information is in the desired format, reporting burden (time and costs) 
is minimal, collection instruments are clearly understood, and OSHA's 
estimate of the information collection burden is accurate. The 
Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651 
et seq.) authorizes information collection by employers as necessary or 
appropriate for enforcement of the OSH Act or for developing 
information regarding the causes and prevention of occupational 
injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also 
requires that OSHA obtain such information with minimum burden upon 
employers, especially those operating small businesses, and to reduce 
to the maximum extent feasible unnecessary duplication of efforts in 
obtaining information (29 U.S.C. 657).
    Paragraph (a)(4) of the Powered Industrial Trucks Standard requires 
employers to obtain the manufacturer's written approval before 
modifying a truck in a manner that affects the capacity and safe 
operation; if the manufacturer grants such approval, the employer must 
revise capacity, operation, and maintenance instruction plates, tags, 
and decals accordingly. For front-end attachments not installed by the 
manufacturer, paragraph (a)(5) mandates that employers provide a marker 
on the trucks that identifies the attachment, as well as the weight of 
both the truck and the attachment when the attachment is at maximum 
elevation with a laterally centered load. Paragraph (a)(6) specifies 
that employers must ensure that the markers required by paragraphs 
(a)(3) through (a)(5) remain affixed to the trucks and are legible.
    Paragraphs (1)(4) and (1)(6) of the Standard contain the paperwork 
requirements necessary to certify the evaluation and training provided 
to powered industrial truck operators. Accordingly, these paragraphs 
specify the following requirements for employers.
     Paragraph (1)(4)(iii)--evaluate each operator's 
performance at least once every three years.
     Paragraph (l)(6)--Certify that each operator meets the 
training and evaluation requirements specified by paragraph (l). This 
certification must include the operator's name, the training date, the 
evaluation date, and the identity of the individual(s) who performed 
the training and evaluation.
    Requiring labels (markings) on modified equipment notifies workers 
of the conditions under which they can safely operate powered 
industrial trucks, thereby preventing such hazards as fires and 
explosions caused by poorly designed electrical systems, rollovers/
tipovers that result from exceeding a truck's stability 
characteristics, and falling loads that occur when loads exceed the 
lifting capacities of attachments. Certification of worker training and 
evaluation provides a means of informing employers that their workers 
received the training and demonstrated the performance necessary to 
operate a truck within the capacity and control limitations. By 
ensuring that workers operate only trucks that are in proper working 
order, and do so safely, employers prevent possible severe injury or 
death of truck operators and other workers who are in the vicinity of 
the trucks. Finally, these paperwork requirements are the most 
efficient means for an OSHA compliance officer to determine that an 
employer properly notified workers about the design and construction 
of, and modifications made to, the trucks they are operating, and that 
an employer provided them with the required training.

II. Special Issues for Comment

    OSHA has a particular interest in comments on the following issues:
     Whether the proposed information collection requirements 
are necessary for the proper performance of the agency's functions, 
including whether the information is useful;
     The accuracy of OSHA's estimate of the burden (time and 
costs) of the information collection requirements, including the 
validity of the methodology and assumptions used;
     The quality, utility, and clarity of the information 
collected; and
     Ways to minimize the burden on employers who must comply; 
for example, by using automated or other technological information 
collection and transmission techniques.

III. Proposed Actions

    OSHA is proposing to increase the existing burden hour estimate of 
the collection of information requirements specified by the Standard. 
In this regard, the agency is proposing to increase the current burden 
hour estimate from 427,866 hours to 450,023 hours, a total increase of 
22,257 hours. An increase in the number of powered industrial truck 
operators from 1,210,679 to 1,276,055 resulted in this increase. The 
agency will summarize the comments submitted in response to this notice 
and will include this summary in the request to OMB.
    Type of Review: Extension of a currently approved collection.
    Title: Powered Industrial Trucks (29 CFR 1910.178).
    OMB Control Number: 1218-0242.
    Affected Public: Business or other for-profits.
    Number of Respondents: 1,276,055.
    Number of Responses: 2,526,588.
    Frequency of Reponses: On occasion; annually; triennially.
    Average Time per Response: Ranges from two minutes to mark an 
approved truck to 30 minutes to perform an evaluation.
    Estimated Total Burden Hours: 450,023.
    Estimated Cost (Operation and Maintenance): $256,626.

IV. Public Participation--Submission of Comments on this Notice and 
Internet Access to Comments and Submissions

    You may submit comments in response to this document as follows: 
(1) Electronically at https://www.regulations.gov, which is the Federal 
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All 
comments, attachments, and other materials must identify the agency 
name and the OSHA docket number for the ICR (Docket No. OSHA-2011-
0062). You may supplement electronic submissions by uploading document 
files electronically. If you wish to mail additional materials in 
reference to an electronic or facsimile submission, you must submit 
them to the OSHA Docket Office (see the section of this notice titled 
ADDRESSES). The additional materials must clearly identify your 
electronic comments by your name, date, and the docket number so that 
the agency can attach them to your comments.
    Because of security procedures, the use of regular mail may cause a 
significant delay in the receipt of comments. For information about 
security procedures concerning the delivery of materials by hand, 
express delivery, messenger, or courier service, please contact the 
OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).

[[Page 65878]]

    Comments and submissions are posted without change at https://www.regulations.gov. Therefore, OSHA cautions commenters about 
submitting personal information such as social security numbers and 
date of birth. Although all submissions are listed in the https://www.regulations.gov index, some information (e.g., copyrighted 
material) is not publicly available to read or download from this 
website. All submissions, including copyrighted material, are available 
for inspection and copying at the OSHA Docket Office. Information on 
using the https://www.regulations.gov website to submit comments and 
access the docket is available at the website's ``User Tips'' link. 
Contact the OSHA Docket Office for information about materials not 
available from the website, and for assistance in using the internet to 
locate docket submissions.

V. Authority and Signature

    Loren Sweatt, Principal Deputy Assistant Secretary of Labor for 
Occupational Safety and Health, directed the preparation of this 
notice. The authority for this notice is the Paperwork Reduction Act of 
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 1-2012 
(77 FR 3912).

    Signed at Washington, DC, on October 9, 2020.
Loren Sweatt,
Principal Deputy Assistant Secretary of Labor for Occupational Safety 
and Health.
[FR Doc. 2020-22884 Filed 10-15-20; 8:45 am]
BILLING CODE 4510-26-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.