Certain Hot-Rolled Carbon Steel Flat Products From the People's Republic of China: Final Results of Antidumping Duty Administrative Review; 2017-2018, 27208-27210 [2020-09760]

Download as PDF 27208 Federal Register / Vol. 85, No. 89 / Thursday, May 7, 2020 / Notices and Occidental Chemical Corporation (OxyChem), as domestic producers of chlorinated isos within the deadline specified in 19 CFR 351.218(d)(1)(i).4 On October 31, 2019, Commerce received a complete substantive response for the review from the domestic producers within the 30-day deadline specified in 19 CFR 351.218(d)(3)(i).5 Commerce received no substantive responses from respondent interested parties, including the Government of China. Pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2), Commerce conducted an expedited (120-day) sunset review of this Order.6 As a result of its review, Commerce determined that revocation of the countervailing duty order would likely lead to a continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. On April 24, 2020, the ITC published its determination that revocation of the Order would likely lead to a continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time, pursuant to section 751(c) of the Act.7 khammond on DSKJM1Z7X2PROD with NOTICES Scope of the Order The products covered by the Order are chlorinated isocyanurates. Chlorinated isocyanurates are derivatives of cyanuric acid, described as chlorinated s-triazine triones. There are three primary chemical compositions of chlorinated isocyanurates: (1) Trichloroisocyanuric acid (TCCA) (Cl3(NCO)3), (2) sodium dichloroisocyanurate (dihydrate) (NaCl2(NCO)3 X 2H2O), and (3) sodium dichloroisocyanurate (anhydrous) (NaCl2(NCO)3). Chlorinated isocyanurates are available in powder, granular and solid (e.g., tablet or stick) forms. Chlorinated isocyanurates are currently classifiable under subheadings 2933.69.6015, 2933.69.6021, 2933.69.6050, 3808.50.4000, 3808.94.5000, and 3808.99.9500 of the Harmonized Tariff Schedule of the 4 See Domestic Producers’ Letter, ‘‘Chlorinated Isocyanurates from the People’s Republic of China: Notice of Intent to Participate,’’ dated October 16, 2019. 5 See Domestic Producers’ Letter, ‘‘Chlorinated Isocyanurates from the People’s Republic of China: Substantive Response to Notice of Initiation of FiveYear (Sunset) Review of the Countervailing Duty Order,’’ dated October 31, 2019. 6 See Chlorinated Isocyanurates from the People’s Republic of China: Final Results of the Expedited First Sunset Review of the Countervailing Duty Order, 85 FR 6142 (February 4, 2020). 7 See Chlorinated Isocyanurates from China, 85 FR 23060 (April 24, 2020). VerDate Sep<11>2014 16:45 May 06, 2020 Jkt 250001 United States (HTSUS). The tariff classification 2933.69.6015 covers sodium dichloroisocyanurates (anhydrous and dihydrate forms) and trichloroisocyanuric acid. The tariff classifications 2933.69.6021 and 2933.69.6050 represent basket categories that include chlorinated isocyanurates and other compounds including an unfused triazine ring. The tariff classifications 3808.50.4000, 3808.94.5000 and 3808.99.9500 cover disinfectants that include chlorinated isocyanurates. The HTSUS subheadings are provided for convenience and customs purposes. The written description of the scope of this Order is dispositive. Continuation of the Order As a result of the determinations by Commerce and the ITC that revocation of the Order would likely lead to continuation or recurrence of countervailable subsidies and material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act, Commerce hereby orders the continuation of the Order. U.S. Customs and Border Protection will continue to collect countervailing duty cash deposits at the rates in effect at the time of entry for all imports of subject merchandise. The effective date of the continuation of the Order will be the date of publication in the Federal Register of this notice of continuation. Pursuant to section 751(c)(2) of the Act, Commerce intends to initiate the next sunset review of the order not later than 30 days prior to the fifth anniversary of the effective date of continuation. Notification to Interested Parties This five-year sunset review and this notice are in accordance with section 751(c) of the Act and published pursuant to section 777(i)(1) of the Act and 19 CFR 351.218(f)(4). Dated: April 30, 2020. Jeffrey I. Kessler, Assistant Secretary for Enforcement and Compliance. [FR Doc. 2020–09762 Filed 5–6–20; 8:45 am] BILLING CODE 3510–DS–P PO 00000 DEPARTMENT OF COMMERCE International Trade Administration [A–570–865] Certain Hot-Rolled Carbon Steel Flat Products From the People’s Republic of China: Final Results of Antidumping Duty Administrative Review; 2017– 2018 Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY: The Department of Commerce (Commerce) determines that all companies subject to this administrative review of the antidumping duty (AD) order on certain hot-rolled carbon steel flat products (hot-rolled steel) from the People’s Republic of China (China) are part of the China-wide entity because none filed a separate rate application (SRA) or separate rate certification (SRC). The period of review (POR) is November 1, 2017 through October 31, 2018. DATES: Applicable May 7, 2020. FOR FURTHER INFORMATION CONTACT: Matthew Renkey, AD/CVD Operations, Office V, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–2312. SUPPLEMENTARY INFORMATION: On December 30, 2019, Commerce published the Preliminary Results of this review.1 Although we invited parties to comment on the Preliminary Results,2 no interested party submitted comments. Accordingly, no decision memorandum accompanies this Federal Register notice. Commerce conducted this administrative review in accordance with section 751 of the Tariff Act of 1930, as amended (the Act). AGENCY: Scope of the Order The products covered by the order are certain hot-rolled carbon steel flat products of a rectangular shape, of a width of 0.5 inch or greater, neither clad, plated, nor coated with metal and whether or not painted, varnished, or coated with plastics or other nonmetallic substances, in coils (whether or not in successively superimposed layers), regardless of thickness, and in straight lengths of a thickness of less 1 See Certain Hot-Rolled Carbon Steel Flat Products from the People’s Republic of China: Preliminary Results of Antidumping Duty Administrative Review; 2017–2018, 84 FR 71896 (December 30, 2019) (Preliminary Results), and accompanying Preliminary Decision Memorandum (PDM). 2 Id., 84 FR at 71896–97. Frm 00005 Fmt 4703 Sfmt 4703 E:\FR\FM\07MYN1.SGM 07MYN1 khammond on DSKJM1Z7X2PROD with NOTICES Federal Register / Vol. 85, No. 89 / Thursday, May 7, 2020 / Notices than 4.75 mm and of a width measuring at least 10 times the thickness. Universal mill plate (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm, but not exceeding 1,250 mm, and of a thickness of not less than 4.0 mm, not in coils and without patterns in relief) of a thickness not less than 4.0 mm is not included within the scope of the order. Specifically included within the scope of the order are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (IF)) steels, high strength low alloy (HSLA) steels, and the substrate for motor lamination steels. IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium or niobium (also commonly referred to as columbium), or both, added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, vanadium, and molybdenum. The substrate for motor lamination steels contains micro-alloying levels of elements such as silicon and aluminum. Steel products included in the scope of the order, regardless of definitions in the Harmonized Tariff Schedule of the United States (HTSUS), are products in which: (i) Iron predominates, by weight, over each of the other contained elements; (ii) the carbon content is two percent or less, by weight; and, (iii) none of the elements listed below exceeds the quantity, by weight, respectively indicated: 1.80 percent of manganese, or 2.25 percent of silicon, or 1.00 percent of copper, or 0.50 percent of aluminum, or 1.25 percent of chromium, or 0.30 percent of cobalt, or 0.40 percent of lead, or 1.25 percent of nickel, or 0.30 percent of tungsten, or 0.10 percent of molybdenum, or 0.10 percent of niobium, or 0.15 percent of vanadium, or 0.15 percent of zirconium. All products that meet the physical and chemical description provided above are within the scope of the order unless otherwise excluded. The following products, for example, are outside or specifically excluded from the scope of the order: • Alloy hot-rolled steel products in which at least one of the chemical elements exceeds those listed above (including, e.g., American Society for Testing and Materials (ASTM) specifications A543, A387, A514, A517, A506). VerDate Sep<11>2014 16:45 May 06, 2020 Jkt 250001 • Society of Automotive Engineers (SAE)/American Iron & Steel Institute (AISI) grades of series 2300 and higher. • Ball bearing steels, as defined in the HTSUS. • Tool steels, as defined in the HTSUS. • Silico-manganese (as defined in the HTSUS) or silicon electrical steel with a silicon level exceeding 2.25 percent. • ASTM specifications A710 and A736. • USS abrasion-resistant steels (USS AR 400, USS AR 500). • All products (proprietary or otherwise) based on an alloy ASTM specification (sample specifications: ASTM A506, A507). • Non-rectangular shapes, not in coils, which are the result of having been processed by cutting or stamping and which have assumed the character of articles or products classified outside chapter 72 of the HTSUS. The merchandise subject to the order is classified in the HTSUS at subheadings: 7208.10.1500, 7208.10.3000, 7208.10.6000, 7208.25.3000, 7208.25.6000, 7208.26.0030, 7208.26.0060, 7208.27.0030, 7208.27.0060, 7208.36.0030, 7208.36.0060, 7208.37.0030, 7208.37.0060, 7208.38.0015, 7208.38.0030, 7208.38.0090, 7208.39.0015, 7208.39.0030, 7208.39.0090, 7208.40.6030, 7208.40.6060, 7208.53.0000, 7208.54.0000, 7208.90.0000, 7211.14.0090, 7211.19.1500, 7211.19.2000, 7211.19.3000, 7211.19.4500, 7211.19.6000, 7211.19.7530, 7211.19.7560, and 7211.19.7590. Certain hot-rolled carbon steel flat products covered by the order, including: vacuum degassed fully stabilized; high strength low alloy; and the substrate for motor lamination steel may also enter under the following tariff numbers: 7225.11.0000, 7225.19.0000, 7225.30.3050, 7225.30.7000, 7225.40.7000, 7225.99.0090, 7226.11.1000, 7226.11.9030, 7226.11.9060, 7226.19.1000, 7226.19.9000, 7226.91.5000, 7226.91.7000, 7226.91.8000, and 7226.99.0000. Subject merchandise may also enter under 7210.70.3000, 7210.90.9000, 7211.14.0030, 7212.40.1000, 7212.40.5000, and 7212.50.0000. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise subject to the order is dispositive. Final Results of Review We made no changes from the Preliminary Results. Therefore, as a PO 00000 Frm 00006 Fmt 4703 Sfmt 4703 27209 result of this review, we determine that all companies subject to this administrative review have not established their eligibility for a separate rate and are part of the Chinawide entity.3 Furthermore, as stated in the PDM,4 we have referred allegations regarding the potential misreporting of entry types to U.S. Customs and Border Protection (CBP). Assessment Rates Commerce shall determine, and CBP shall assess, antidumping duties on all appropriate entries in accordance with section 751(a)(2)(C) of the Act and 19 CFR 351.212(b). Because we determined that all companies subject to this review are not eligible for a separate rate and are part of the China-wide entity, we will instruct CBP to apply an ad valorem assessment rate of 90.83 percent to all entries of subject merchandise during the POR by the companies under review. Commerce intends to issue assessment instructions to CBP 15 days after the date of publication of these final results of review. Cash Deposit Requirements The following cash deposit requirements will be effective for all shipments of subject merchandise entered, or withdrawn from warehouse, for consumption on or after the publication date of the final results of this administrative review, as provided by section 751(a)(2)(C) of the Act: (1) For all China exporters of subject merchandise that have not been found to be entitled to a separate rate, the cash deposit rate will be that for the Chinawide entity (i.e., 90.83 percent); (2) for previously investigated or reviewed China and non-China exporters which are not under review in this segment of the proceeding but received a separate rate in a previous segment, the cash deposit rate will continue to be the existing exporter-specific rate; and (3) for all non-China exporters of subject merchandise which have not received their own rate, the cash deposit rate will be the rate applicable to the China exporter(s) that supplied that non-China exporter. These deposit requirements, when imposed, shall remain in effect until further notice. Notification to Importers This notice serves as a reminder to importers of their responsibility, under 3 For a list of the companies under review and which are determined to be part of the China-wide entity, see Initiation of Antidumping and Countervailing Duty Administrative Reviews, 84 FR 2159 (February 6, 2019). 4 See PDM at 4. E:\FR\FM\07MYN1.SGM 07MYN1 27210 Federal Register / Vol. 85, No. 89 / Thursday, May 7, 2020 / Notices 19 CFR 351.402(f)(2), to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in Commerce’s presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties. Administrative Protective Order This notice also serves as a reminder to parties subject to administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely written notification of return/ destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation. Notification to Interested Parties We are issuing and publishing this notice in accordance with sections 751(a)(1) and 777(i) of the Act, and 19 CFR 351.213(h) and 351.221(b)(5). Dated: May 1, 2020. Jeffrey I. Kessler, Assistant Secretary for Enforcement and Compliance. [FR Doc. 2020–09760 Filed 5–6–20; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration Agency Information Collection Activities; Comment Request; Vessel Monitoring System Requirements in Western Pacific Fisheries National Oceanic and Atmospheric Administration (NOAA), Commerce. ACTION: Notice. AGENCY: The Department of Commerce, in accordance with the Paperwork Reduction Act of 1995 (PRA), invites the general public and other Federal agencies to comment on proposed, and continuing information collections, which helps us assess the impact of our information collection requirements and minimize the public’s reporting burden. The purpose of this notice is to allow for 60 days of public comment preceding submission of the collection to OMB. DATES: To ensure consideration, comments regarding this proposed khammond on DSKJM1Z7X2PROD with NOTICES SUMMARY: VerDate Sep<11>2014 16:45 May 06, 2020 Jkt 250001 information collection must be received on or before July 6, 2020. ADDRESSES: Direct all written comments to Adrienne Thomas, PRA Officer, NOAA, 151 Patton Avenue, Room 159, Asheville, NC 28801 (or via the internet at PRAcomments@doc.gov). Please reference OMB Control Number 06xxxxxx in the subject line of your comments. Do not submit Confidential Business Information or otherwise sensitive or protected information. FOR FURTHER INFORMATION CONTACT: Requests for additional information or copies of the information collection instrument and instructions should be directed to Walter Ikehara, (808) 725– 5175 or walter.ikehara@noaa.gov. SUPPLEMENTARY INFORMATION: I. Abstract This request is for extension of a currently approved information collection. As part of fishery management plans developed under the authority of the Magnuson-Stevens Fishery Conservation and Management Act, owners of commercial fishing vessels in the Hawaii pelagic longline fishery, American Samoa pelagic longline fishery (only vessels longer than 50 feet), Northwestern Hawaiian Islands lobster fishery (currently inactive), and Northern Mariana Islands bottomfish fishery (only vessels longer than 40 feet) must allow the National Oceanic and Atmospheric Administration (NOAA) to install vessel monitoring system (VMS) units on their vessels when directed to do so by NOAA enforcement personnel. VMS units automatically send periodic reports on the position of the vessel. NOAA uses the reports to monitor the vessel’s location and activities, primarily to enforce regulated fishing areas. NOAA pays for the units and messaging. There is no public burden for the automatic messaging; VMS installation, annual maintenance and operating (connection) costs for Hawaii longline vessels are paid for by NOAA Fisheries. Estimated Time per Response: 4 hours for installation or replacement of a VMS unit; 2 hours for annual maintenance. Estimated Total Annual Burden Hours: 478 (estimated 15 installations per year). Estimated Total Annual Cost to Public: $0 in VMS system installation and maintenance, recordkeeping, or reporting costs. IV. Request for Comments We are soliciting public comments to permit the Department to: (a) Evaluate whether the proposed information collection is necessary for the proper functions of the agency, including whether the information will have practical utility; (b) Evaluate the accuracy of our estimate of the time and cost burden for this proposed collection, including the validity of the methodology and assumptions used; (c) Evaluate ways to enhance the quality, utility, and clarity of the information to be collected; and (d) Minimize the reporting burden on those who are to respond, including the use of automated collection techniques or other forms of information technology. Comments that you submit in response to this notice are a matter of public record. We will include or summarize each comment in our request to OMB to approve this ICR. Before including your address, phone number, email address, or other personal identifying information in your comment, you should be aware that your entire comment—including your personal identifying information—may be made publicly available at any time. While you may ask us in your comment to withhold your personal identifying information from public review, we cannot guarantee that we will be able to do so. Dated: May 4, 2020. Sheleen Dumas, Department PRA Clearance Officer, Office of the Chief Information Officer, Commerce Department. [FR Doc. 2020–09768 Filed 5–6–20; 8:45 am] BILLING CODE 3510–22–P II. Method of Collection Automatic electronic submission. III. Data OMB Control Number: 0648–0441. Form Number: None. Type of Review: Regular submission (Extension of a currently approved information collection). Affected Public: Business or other forprofit organizations; individuals or households. Estimated Number of Respondents: 209. PO 00000 Frm 00007 Fmt 4703 Sfmt 4703 DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration [RTID 0648–XA140] Fisheries of the Gulf of Mexico and the South Atlantic; Southeast Data, Assessment, and Review (SEDAR); Public Meeting National Marine Fisheries Service (NMFS), National Oceanic and AGENCY: E:\FR\FM\07MYN1.SGM 07MYN1

Agencies

[Federal Register Volume 85, Number 89 (Thursday, May 7, 2020)]
[Notices]
[Pages 27208-27210]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-09760]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[A-570-865]


Certain Hot-Rolled Carbon Steel Flat Products From the People's 
Republic of China: Final Results of Antidumping Duty Administrative 
Review; 2017-2018

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.

SUMMARY: The Department of Commerce (Commerce) determines that all 
companies subject to this administrative review of the antidumping duty 
(AD) order on certain hot-rolled carbon steel flat products (hot-rolled 
steel) from the People's Republic of China (China) are part of the 
China-wide entity because none filed a separate rate application (SRA) 
or separate rate certification (SRC). The period of review (POR) is 
November 1, 2017 through October 31, 2018.

DATES: Applicable May 7, 2020.

FOR FURTHER INFORMATION CONTACT: Matthew Renkey, AD/CVD Operations, 
Office V, Enforcement and Compliance, International Trade 
Administration, U.S. Department of Commerce, 1401 Constitution Avenue 
NW, Washington, DC 20230; telephone: (202) 482-2312.

SUPPLEMENTARY INFORMATION: On December 30, 2019, Commerce published the 
Preliminary Results of this review.\1\ Although we invited parties to 
comment on the Preliminary Results,\2\ no interested party submitted 
comments. Accordingly, no decision memorandum accompanies this Federal 
Register notice. Commerce conducted this administrative review in 
accordance with section 751 of the Tariff Act of 1930, as amended (the 
Act).
---------------------------------------------------------------------------

    \1\ See Certain Hot-Rolled Carbon Steel Flat Products from the 
People's Republic of China: Preliminary Results of Antidumping Duty 
Administrative Review; 2017-2018, 84 FR 71896 (December 30, 2019) 
(Preliminary Results), and accompanying Preliminary Decision 
Memorandum (PDM).
    \2\ Id., 84 FR at 71896-97.
---------------------------------------------------------------------------

Scope of the Order

    The products covered by the order are certain hot-rolled carbon 
steel flat products of a rectangular shape, of a width of 0.5 inch or 
greater, neither clad, plated, nor coated with metal and whether or not 
painted, varnished, or coated with plastics or other non-metallic 
substances, in coils (whether or not in successively superimposed 
layers), regardless of thickness, and in straight lengths of a 
thickness of less

[[Page 27209]]

than 4.75 mm and of a width measuring at least 10 times the thickness. 
Universal mill plate (i.e., flat-rolled products rolled on four faces 
or in a closed box pass, of a width exceeding 150 mm, but not exceeding 
1,250 mm, and of a thickness of not less than 4.0 mm, not in coils and 
without patterns in relief) of a thickness not less than 4.0 mm is not 
included within the scope of the order.
    Specifically included within the scope of the order are vacuum 
degassed, fully stabilized (commonly referred to as interstitial-free 
(IF)) steels, high strength low alloy (HSLA) steels, and the substrate 
for motor lamination steels. IF steels are recognized as low carbon 
steels with micro-alloying levels of elements such as titanium or 
niobium (also commonly referred to as columbium), or both, added to 
stabilize carbon and nitrogen elements. HSLA steels are recognized as 
steels with micro-alloying levels of elements such as chromium, copper, 
niobium, vanadium, and molybdenum. The substrate for motor lamination 
steels contains micro-alloying levels of elements such as silicon and 
aluminum.
    Steel products included in the scope of the order, regardless of 
definitions in the Harmonized Tariff Schedule of the United States 
(HTSUS), are products in which: (i) Iron predominates, by weight, over 
each of the other contained elements; (ii) the carbon content is two 
percent or less, by weight; and, (iii) none of the elements listed 
below exceeds the quantity, by weight, respectively indicated:

1.80 percent of manganese, or
2.25 percent of silicon, or
1.00 percent of copper, or
0.50 percent of aluminum, or
1.25 percent of chromium, or
0.30 percent of cobalt, or
0.40 percent of lead, or
1.25 percent of nickel, or
0.30 percent of tungsten, or
0.10 percent of molybdenum, or
0.10 percent of niobium, or
0.15 percent of vanadium, or
0.15 percent of zirconium.

    All products that meet the physical and chemical description 
provided above are within the scope of the order unless otherwise 
excluded. The following products, for example, are outside or 
specifically excluded from the scope of the order:
     Alloy hot-rolled steel products in which at least one of 
the chemical elements exceeds those listed above (including, e.g., 
American Society for Testing and Materials (ASTM) specifications A543, 
A387, A514, A517, A506).
     Society of Automotive Engineers (SAE)/American Iron & 
Steel Institute (AISI) grades of series 2300 and higher.
     Ball bearing steels, as defined in the HTSUS.
     Tool steels, as defined in the HTSUS.
     Silico-manganese (as defined in the HTSUS) or silicon 
electrical steel with a silicon level exceeding 2.25 percent.
     ASTM specifications A710 and A736.
     USS abrasion-resistant steels (USS AR 400, USS AR 500).
     All products (proprietary or otherwise) based on an alloy 
ASTM specification (sample specifications: ASTM A506, A507).
     Non-rectangular shapes, not in coils, which are the result 
of having been processed by cutting or stamping and which have assumed 
the character of articles or products classified outside chapter 72 of 
the HTSUS.
    The merchandise subject to the order is classified in the HTSUS at 
subheadings: 7208.10.1500, 7208.10.3000, 7208.10.6000, 7208.25.3000, 
7208.25.6000, 7208.26.0030, 7208.26.0060, 7208.27.0030, 7208.27.0060, 
7208.36.0030, 7208.36.0060, 7208.37.0030, 7208.37.0060, 7208.38.0015, 
7208.38.0030, 7208.38.0090, 7208.39.0015, 7208.39.0030, 7208.39.0090, 
7208.40.6030, 7208.40.6060, 7208.53.0000, 7208.54.0000, 7208.90.0000, 
7211.14.0090, 7211.19.1500, 7211.19.2000, 7211.19.3000, 7211.19.4500, 
7211.19.6000, 7211.19.7530, 7211.19.7560, and 7211.19.7590.
    Certain hot-rolled carbon steel flat products covered by the order, 
including: vacuum degassed fully stabilized; high strength low alloy; 
and the substrate for motor lamination steel may also enter under the 
following tariff numbers: 7225.11.0000, 7225.19.0000, 7225.30.3050, 
7225.30.7000, 7225.40.7000, 7225.99.0090, 7226.11.1000, 7226.11.9030, 
7226.11.9060, 7226.19.1000, 7226.19.9000, 7226.91.5000, 7226.91.7000, 
7226.91.8000, and 7226.99.0000. Subject merchandise may also enter 
under 7210.70.3000, 7210.90.9000, 7211.14.0030, 7212.40.1000, 
7212.40.5000, and 7212.50.0000. Although the HTSUS subheadings are 
provided for convenience and customs purposes, the written description 
of the merchandise subject to the order is dispositive.

Final Results of Review

    We made no changes from the Preliminary Results. Therefore, as a 
result of this review, we determine that all companies subject to this 
administrative review have not established their eligibility for a 
separate rate and are part of the China-wide entity.\3\ Furthermore, as 
stated in the PDM,\4\ we have referred allegations regarding the 
potential misreporting of entry types to U.S. Customs and Border 
Protection (CBP).
---------------------------------------------------------------------------

    \3\ For a list of the companies under review and which are 
determined to be part of the China-wide entity, see Initiation of 
Antidumping and Countervailing Duty Administrative Reviews, 84 FR 
2159 (February 6, 2019).
    \4\ See PDM at 4.
---------------------------------------------------------------------------

Assessment Rates

    Commerce shall determine, and CBP shall assess, antidumping duties 
on all appropriate entries in accordance with section 751(a)(2)(C) of 
the Act and 19 CFR 351.212(b). Because we determined that all companies 
subject to this review are not eligible for a separate rate and are 
part of the China-wide entity, we will instruct CBP to apply an ad 
valorem assessment rate of 90.83 percent to all entries of subject 
merchandise during the POR by the companies under review. Commerce 
intends to issue assessment instructions to CBP 15 days after the date 
of publication of these final results of review.

Cash Deposit Requirements

    The following cash deposit requirements will be effective for all 
shipments of subject merchandise entered, or withdrawn from warehouse, 
for consumption on or after the publication date of the final results 
of this administrative review, as provided by section 751(a)(2)(C) of 
the Act: (1) For all China exporters of subject merchandise that have 
not been found to be entitled to a separate rate, the cash deposit rate 
will be that for the China-wide entity (i.e., 90.83 percent); (2) for 
previously investigated or reviewed China and non-China exporters which 
are not under review in this segment of the proceeding but received a 
separate rate in a previous segment, the cash deposit rate will 
continue to be the existing exporter-specific rate; and (3) for all 
non-China exporters of subject merchandise which have not received 
their own rate, the cash deposit rate will be the rate applicable to 
the China exporter(s) that supplied that non-China exporter. These 
deposit requirements, when imposed, shall remain in effect until 
further notice.

Notification to Importers

    This notice serves as a reminder to importers of their 
responsibility, under

[[Page 27210]]

19 CFR 351.402(f)(2), to file a certificate regarding the reimbursement 
of antidumping duties prior to liquidation of the relevant entries 
during this review period. Failure to comply with this requirement 
could result in Commerce's presumption that reimbursement of 
antidumping duties occurred and the subsequent assessment of double 
antidumping duties.

Administrative Protective Order

    This notice also serves as a reminder to parties subject to 
administrative protective order (APO) of their responsibility 
concerning the disposition of proprietary information disclosed under 
APO in accordance with 19 CFR 351.305(a)(3). Timely written 
notification of return/destruction of APO materials or conversion to 
judicial protective order is hereby requested. Failure to comply with 
the regulations and the terms of an APO is a sanctionable violation.

Notification to Interested Parties

    We are issuing and publishing this notice in accordance with 
sections 751(a)(1) and 777(i) of the Act, and 19 CFR 351.213(h) and 
351.221(b)(5).

    Dated: May 1, 2020.
Jeffrey I. Kessler,
Assistant Secretary for Enforcement and Compliance.
[FR Doc. 2020-09760 Filed 5-6-20; 8:45 am]
 BILLING CODE 3510-DS-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.