Finished Carbon Steel Flanges From Spain: Final Results of Antidumping Duty Administrative Review; 2017-2018, 7919-7921 [2020-02777]

Download as PDF Federal Register / Vol. 85, No. 29 / Wednesday, February 12, 2020 / Notices the 2019 SAS and collected electronically through the Census Bureau’s Centurion online reporting system. Respondents will be sent an initial letter with instructions detailing how to log into the instrument and report their information. These letters will be addressed to the location’s CNO. Before mailing, the Census Bureau will attempt to identify the CNO at each location. In instances where the CNO is not identifiable, the letter will be addressed to the hospital’s administrative office with attention to the CNO. Collection is scheduled to begin in September 2020 and end in April 2021. Paperwork Reduction Act Notwithstanding, any other provision of law, no person is required to respond to, nor shall a person be subject to a penalty for failure to comply with a collection of information subject to the requirements of the Paperwork Reduction Act (PRA) unless that collection of information displays a currently valid OMB control number. In accordance with the PRA, 44 United States Code, Chapter 45, the Census Bureau will submit a request for approval to the OMB for approval of the MOPS–HP. Dated: February 5, 2020. Steven D. Dillingham, Director, Bureau of the Census. [FR Doc. 2020–02758 Filed 2–11–20; 8:45 am] BILLING CODE 3510–07–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–07–2020] lotter on DSKBCFDHB2PROD with NOTICES Foreign-Trade Zone (FTZ) 52— Hauppauge, New York, Notification of Proposed Production Activity, Regent Tek Industries, Inc. (Road Marking Material), Shirley, New York Regent Tek Industries, Inc. (Regent Tek), submitted a notification of proposed production activity to the FTZ Board for its facility in Shirley, New York. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on January 31, 2020. Regent Tek’s facility is located within FTZ 52. The facility is used for the production of thermoplastic road marking material. Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the specific foreign-status materials and components and specific finished products described in the submitted notification (as described below) and VerDate Sep<11>2014 17:03 Feb 11, 2020 Jkt 250001 subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt Regent Tek from customs duty payments on the foreign-status components used in export production. On its domestic sales, for the foreignstatus materials/components noted below, Regent Tek would be able to choose the duty rates during customs entry procedures that apply to thermoplastic granular road marking material (duty rate 3.2%). Regent Tek would be able to avoid duty on foreignstatus components which become scrap/ waste. Customs duties also could possibly be deferred or reduced on foreign-status production equipment. The components and materials sourced from abroad include: Titanium dioxide (TiO2); glass beads (M247 Type 1); resins—pentaerythritol ester of rosin and alkyd gum-based resin; and, stearic acid—saturated fatty acid (duty rate ranges from 2.1c/kg + 3.8% to 6%). The request indicates that certain materials/ components are subject to special duties under Section 301 of the Trade Act of 1974 (Section 301), depending on the country of origin. The applicable Section 301 decisions require subject merchandise to be admitted to FTZs in privileged foreign status (19 CFR 146.41). Public comment is invited from interested parties. Submissions shall be addressed to the Board’s Executive Secretary and sent to: ftz@trade.gov. The closing period for their receipt is March 23, 2020. A copy of the notification will be available for public inspection in the ‘‘Reading Room’’ section of the Board’s website, which is accessible via www.trade.gov/ftz. For further information, contact Christopher Wedderburn at Chris.Wedderburn@trade.gov or (202) 482–1963. 7919 Board) by the Iowa Foreign Trade Zone Corporation, grantee of FTZ 107, requesting subzone status for the facility of Warehouse Specialists, LLC, located in Council Bluffs, Iowa. The application was submitted pursuant to the provisions of the Foreign-Trade Zones Act, as amended (19 U.S.C. 81a–81u), and the regulations of the Board (15 CFR part 400). It was formally docketed on February 7, 2020. The proposed subzone (48.04 acres) is located at 19301 Bunge Avenue (Highway H10), Council Bluffs, Iowa. No authorization for production activity has been requested at this time. The proposed subzone would be subject to the existing activation limit of FTZ 107. In accordance with the Board’s regulations, Elizabeth Whiteman of the FTZ Staff is designated examiner to review the application and make recommendations to the Executive Secretary. Public comment is invited from interested parties. Submissions shall be addressed to the Board’s Executive Secretary and sent to: ftz@trade.gov. The closing period for their receipt is March 23, 2020. Rebuttal comments in response to material submitted during the foregoing period may be submitted during the subsequent 15-day period to April 7, 2020. A copy of the application will be available for public inspection in the ‘‘Reading Room’’ section of the Board’s website, which is accessible via www.trade.gov/ftz. For further information, contact Elizabeth Whiteman at Elizabeth.Whiteman@trade.gov or (202) 482–0473. Dated: February 7, 2020. Andrew McGilvray, Executive Secretary. [FR Doc. 2020–02787 Filed 2–11–20; 8:45 am] BILLING CODE 3510–DS–P Dated: February 7, 2020. Andrew McGilvray, Executive Secretary. DEPARTMENT OF COMMERCE [FR Doc. 2020–02788 Filed 2–11–20; 8:45 am] [A–469–815] International Trade Administration BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board Foreign-Trade Zone 107—Polk County, Iowa; Application for Subzone; Warehouse Specialists, LLC; Council Bluffs, Iowa An application has been submitted to the Foreign-Trade Zones Board (the Frm 00003 Fmt 4703 Sfmt 4703 Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY: The Department of Commerce (Commerce) finds that sales of finished carbon steel flanges (flanges) from Spain were made at less than normal value during the period of review (POR), February 8, 2017 through May 31, 2018. AGENCY: [S–27–2020] PO 00000 Finished Carbon Steel Flanges From Spain: Final Results of Antidumping Duty Administrative Review; 2017– 2018 E:\FR\FM\12FEN1.SGM 12FEN1 7920 Federal Register / Vol. 85, No. 29 / Wednesday, February 12, 2020 / Notices Applicable February 12, 2020. FOR FURTHER INFORMATION CONTACT: Marc Castillo or Mark Flessner, AD/CVD Operations, Office VI, Enforcement and Compliance, International Trade Administration, Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–0519 or (202) 482–6312, respectively. DATES: SUPPLEMENTARY INFORMATION: Background lotter on DSKBCFDHB2PROD with NOTICES Commerce published the initiation of this administrative review on August 10, 2018.1 These final results cover six companies for which an administrative review was initiated and not rescinded. On August 13, 2019, Commerce published the Preliminary Results of this administrative review and invited interested parties to comment on the Preliminary Results.2 On November 26, 2019, Weldbend Corporation and Boltex Manufacturing Co., L.P. (collectively, the petitioners) submitted their case brief.3 On the same day, ULMA submitted its case brief.4 On December 9, 2019, the petitioners submitted their rebuttal brief.5 Also on December 9, 2019, ULMA submitted its rebuttal brief.6 No other party submitted case or rebuttal briefs. Commerce exercised its discretion to toll all deadlines affected by the partial federal government closure from December 22, 2018 through the resumption of operations on January 29, 2019.7 If the new deadline falls on a non-business day, in accordance with Commerce’s practice, the deadline will become the next business day. On November 19, 2019, we extended the 1 See Initiation of Antidumping and Countervailing Duty Administrative Reviews, 83 FR 39688 (August 10, 2018) (Initiation Notice). 2 See Finished Carbon Steel Flanges from Spain: Preliminary Results of Antidumping Duty Administrative Review; 2017–2018, 84 FR 40026 (August 13, 2019) (Preliminary Results). 3 See Petitioners’ Letter, ‘‘Finished Carbon Steel Flanges from Spain: Case Brief,’’ dated November 26, 2019. 4 See ULMA’s Letter, ‘‘ULMA FORJA’s Case Brief: Finished Carbon Steel Flanges from Spain POR 1,’’ dated November 26, 2019. 5 See Petitioners’ Letter, ‘‘Finished Carbon Steel Flanges from Spain: Rebuttal Brief,’’ dated December 9, 2019. 6 See ULMA’s Letter, ‘‘ULMA FORJA’s Reply Brief: Finished Carbon Steel Flanges from Spain POR 1,’’ dated December 9, 2019. 7 See Memorandum to the Record from Gary Taverman, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, performing the non-exclusive functions and duties of the Assistant Secretary for Enforcement and Compliance, ‘‘Deadlines Affected by the Partial Shutdown of the Federal Government,’’ dated January 28, 2019. All deadlines in this segment of the proceeding have been extended by 40 days. VerDate Sep<11>2014 17:03 Feb 11, 2020 Jkt 250001 deadline for these final results, until February 7, 2020.8 Scope of the Order 9 The scope of the Order covers finished carbon steel flanges. Finished carbon steel flanges are currently classified under subheadings 7307.91.5010 and 7307.91.5050 of the Harmonized Tariff Schedule of the United States (HTSUS). They may also be entered under HTSUS subheadings 7307.91.5030 and 7307.91.5070. While HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this Order is dispositive. A full description of the scope of the Order is contained in the Issues and Decision Memorandum,10 which is incorporated herein by reference. The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at https:// access.trade.gov and is available to all parties in the Central Records Unit, Room B8024 of the main Commerce building. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly on the internet at https:// enforcement.trade.gov/frn/. The signed Issues and Decision Memorandum and the electronic version of the Issues and Decision Memorandum are identical in content. Analysis of Comments Received All issues raised in the case and rebuttal briefs filed by parties in this review are addressed in the Issues and Decision Memorandum. A list of the issues which parties raised, and to which we respond in the Issues and Decision Memorandum, follows in the appendix to this notice. Changes Since the Preliminary Results Based on our analysis of the comments received, and for the reasons explained in the Issues and Decision Memorandum, Commerce made no changes in methodology to the 8 See Memorandum, ‘‘Finished Carbon Steel Flanges from Spain: Extension of Time Limit for Final Results of Antidumping Duty Administrative Review, 2017–2018,’’ dated November 18, 2019. 9 See Finished Carbon Steel Flanges from Spain: Antidumping Duty Order, 82 FR 27229 (June 14, 2017) (the Order). 10 See Memorandum, ‘‘Issues and Decisions Memorandum for the Final Results of the Antidumping Duty Administrative Review: Finished Carbon Steel Flanges from Spain; 2017– 2018,’’ dated concurrently with this notice (Issues and Decisions Memorandum). PO 00000 Frm 00004 Fmt 4703 Sfmt 4703 Preliminary Results. However, based on our analysis of the comments received, and for the reasons explained in the Issues and Decision Memorandum, we made certain changes to ULMA’s margin calculation. Final Results of Administrative Review For these final results, we determine that the following weighted-average dumping margins exist for the period February 8, 2017 through May 31, 2018: Exporter/manufacturer ULMA Forja, S.Coop .................. Grupo Cunado ............................ Tubacero, S.L ............................. Ateaciones De Metales Sinterizados S.A ..................... Transglory S.A ............................ Central Y Almacenes .................. Weightedaverage dumping margin (percent) 4.47 4.47 4.47 4.47 4.47 4.47 Rate for Non-Selected Respondents For the rate for non-selected respondents in an administrative review, generally, Commerce looks to section 735(c)(5) of the Act, which provides instructions for calculating the all-others rate in a market economy investigation. Under section 735(c)(5)(A) of the Act, the all-others rate is normally ‘‘an amount equal to the weighted-average of the estimated weighted-average dumping margins established for exporters and producers individually investigated, excluding any zero or de minimis margins, and any margins determined entirely {on the basis of facts available}.’’ In this segment of the proceeding, we calculated a margin for ULMA that was not zero, de minimis, or based on facts available. Accordingly, we have applied the margin calculated for ULMA to the non-individually examined respondents. Assessment Commerce shall determine and U.S. Customs and Border Protection (CBP) shall assess antidumping duties on all appropriate entries. Commerce will instruct CBP to apply an ad valorem assessment rate of 4.47 percent to all entries of subject merchandise during the POR which were produced and/or exported by ULMA. Commerce will also instruct CBP to apply an ad valorem assessment rate of 4.47 percent to all entries of subject merchandise during the POR which were produced and/or exported by Grupo Cunado, Tubacero, S.L., Ateaciones De Metales Sinterizados S.A., Transglory S.A., and Central Y Almacenes. We intend to E:\FR\FM\12FEN1.SGM 12FEN1 Federal Register / Vol. 85, No. 29 / Wednesday, February 12, 2020 / Notices issue assessment instructions directly to CBP 15 days after publication of the final results of this review. Cash Deposit Requirements The following deposit requirements for estimated antidumping duties will be effective upon publication of the notice of these final results of review for all shipments of flanges from Spain entered, or withdrawn from warehouse, for consumption on or after the date of publication as provided by section 751(a)(2) of the Act: (1) The cash deposit rate for ULMA, Grupo Cunado, Tubacero, S.L., Ateaciones De Metales Sinterizados S.A., Transglory S.A., and Central Y Almacenes, will be 4.47 percent; (2) for merchandise exported by producers or exporters not covered in this review but covered in a prior segment of the proceeding, the cash deposit rate will continue to be the company-specific rate published for the most recent period; (3) if the exporter is not a firm covered in this review, a prior review, or the original investigation but the producer is, then the cash deposit rate will be the rate established for the most recent period for the producer of the merchandise; (4) the cash deposit rate for all other producers or exporters will continue to be 18.81 percent,11 the all-others rate established in the lessthan-fair-value investigation. These cash deposit requirements shall remain in effect until further notice. lotter on DSKBCFDHB2PROD with NOTICES Notification to Importers This notice serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties and/or countervailing duties prior to liquidation of the relevant entries during this POR. Failure to comply with this requirement could result in Commerce’s presumption that reimbursement of antidumping duties and/or countervailing duties occurred and the subsequent assessment of doubled antidumping duties. Notification to Interested Parties Regarding Administrative Protective Order This notice also serves as the only reminder to parties subject to administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written 11 See the Order, 82 FR 27229. VerDate Sep<11>2014 17:03 Feb 11, 2020 notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation. Notification to Interested Parties We are issuing and publishing notice of these final results in accordance with sections 751(a)(1) and 777(i)(1) of the Act and 19 CFR 351.213(h). Dated: February 6, 2020. Jeffrey I. Kessler, Assistant Secretary for Enforcement and Compliance. Appendix List of Topics Discussed in the Issues and Decision Memorandum I. Summary II. Background III. Scope of the Order IV. Discussion of the Issues Comment 1: Scrap Offset Comment 2: Cost Reconciliation Difference Comment 3: Reconversion Income Comment 4: Programming Adjustments V. Recommendation [FR Doc. 2020–02777 Filed 2–11–20; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration Notice of Scope Rulings Enforcement and Compliance, International Trade Administration, Department of Commerce. DATES: Applicable February 12, 2020. SUMMARY: The Department of Commerce (Commerce) hereby publishes a list of scope rulings and anti-circumvention determinations made during the period July 1, 2019 through September 30, 2019. We intend to publish future lists after the close of the next calendar quarter. FOR FURTHER INFORMATION CONTACT: Marcia E. Short, AD/CVD Operations, Customs Liaison Unit, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: 202–482–1560. SUPPLEMENTARY INFORMATION: AGENCY: Background Commerce’s regulations provide that it will publish in the Federal Register a list of scope rulings on a quarterly basis.1 Our most recent notification of scope rulings was published on January 1 See Jkt 250001 PO 00000 Fmt 4703 16, 2020.2 This current notice covers all scope rulings and anti-circumvention determinations made by Enforcement and Compliance between July 1, 2019 through September 30, 2019. Scope Rulings Made July 1, 2019 through September 30, 2019: Mexico A–201–845 and C–201–846: Sugar From Mexico Requestor: Batory Foods, Inc., and Rafi Industries, Inc. U.S.-origin ‘‘standard sugar’’ with sucrose/polarity content equal to or higher than 99.4, a maximum moisture content of 0.06 percent, and a maximum color of 600; and U.S.-origin ‘‘refined sugar’’ with a sucrose/polarity content of at least 99.85, sediment of 3 ppm max, and a moisture content of 0.04 percent max, which are repackaged in Mexico into four ply, fifty-pound-capacity kraft paper bags (41.7145 inches by 30.50 inches) and 2,500-pound-capacity polypropylene ‘supersacks’ (50 inches in height, with a front panel measuring 37 inches and a side panel measuring 37 inches), imported by Rafi Industries, Inc., are not within the scope of the Agreements Suspending the Antidumping and Countervailing Duty Investigations on Sugar from Mexico (A–201–845 and C–201–846) because the repackaging operations in Mexico do not substantially transform the products and, thus, do not alter their country of origin; September 3, 2019. People’s Republic of China (China) A–570–914 and C–570–915: LightWalled Rectangular Pipe and Tube From the People’s Republic of China Requestor: Carlson AirFlo Merchandising Systems; certain finished components of refrigerated merchandising and display structures imported from China with part numbers R10447, and 250355 are outside the scope of the antidumping duty orders; September 11, 2019. A–570–601: Tapered Roller Bearings From the People’s Republic of China Requestor: WorldPac Inc.; Based on our analysis of the scope language of the order, the comments received, and a substantial transformation analysis, we determined that WorldPac’s wheel hub assembly, consisting of a Chinese tapered roller bearing (TRB) set, a Polish TRB set, a German wheel hub, and a non-Chinese origin shaft seal with antilock brake (ABS) sensors ring, produced 2 See Notice of Scope Rulings, 85 FR 2712 (Jan. 16, 2020). 19 CFR 351.225(o). Frm 00005 7921 Sfmt 4703 E:\FR\FM\12FEN1.SGM 12FEN1

Agencies

[Federal Register Volume 85, Number 29 (Wednesday, February 12, 2020)]
[Notices]
[Pages 7919-7921]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-02777]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[A-469-815]


Finished Carbon Steel Flanges From Spain: Final Results of 
Antidumping Duty Administrative Review; 2017-2018

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.

SUMMARY: The Department of Commerce (Commerce) finds that sales of 
finished carbon steel flanges (flanges) from Spain were made at less 
than normal value during the period of review (POR), February 8, 2017 
through May 31, 2018.

[[Page 7920]]


DATES: Applicable February 12, 2020.

FOR FURTHER INFORMATION CONTACT: Marc Castillo or Mark Flessner, AD/CVD 
Operations, Office VI, Enforcement and Compliance, International Trade 
Administration, Department of Commerce, 1401 Constitution Avenue NW, 
Washington, DC 20230; telephone: (202) 482-0519 or (202) 482-6312, 
respectively.

SUPPLEMENTARY INFORMATION: 

Background

    Commerce published the initiation of this administrative review on 
August 10, 2018.\1\ These final results cover six companies for which 
an administrative review was initiated and not rescinded. On August 13, 
2019, Commerce published the Preliminary Results of this administrative 
review and invited interested parties to comment on the Preliminary 
Results.\2\ On November 26, 2019, Weldbend Corporation and Boltex 
Manufacturing Co., L.P. (collectively, the petitioners) submitted their 
case brief.\3\ On the same day, ULMA submitted its case brief.\4\ On 
December 9, 2019, the petitioners submitted their rebuttal brief.\5\ 
Also on December 9, 2019, ULMA submitted its rebuttal brief.\6\ No 
other party submitted case or rebuttal briefs.
---------------------------------------------------------------------------

    \1\ See Initiation of Antidumping and Countervailing Duty 
Administrative Reviews, 83 FR 39688 (August 10, 2018) (Initiation 
Notice).
    \2\ See Finished Carbon Steel Flanges from Spain: Preliminary 
Results of Antidumping Duty Administrative Review; 2017-2018, 84 FR 
40026 (August 13, 2019) (Preliminary Results).
    \3\ See Petitioners' Letter, ``Finished Carbon Steel Flanges 
from Spain: Case Brief,'' dated November 26, 2019.
    \4\ See ULMA's Letter, ``ULMA FORJA's Case Brief: Finished 
Carbon Steel Flanges from Spain POR 1,'' dated November 26, 2019.
    \5\ See Petitioners' Letter, ``Finished Carbon Steel Flanges 
from Spain: Rebuttal Brief,'' dated December 9, 2019.
    \6\ See ULMA's Letter, ``ULMA FORJA's Reply Brief: Finished 
Carbon Steel Flanges from Spain POR 1,'' dated December 9, 2019.
---------------------------------------------------------------------------

    Commerce exercised its discretion to toll all deadlines affected by 
the partial federal government closure from December 22, 2018 through 
the resumption of operations on January 29, 2019.\7\ If the new 
deadline falls on a non-business day, in accordance with Commerce's 
practice, the deadline will become the next business day. On November 
19, 2019, we extended the deadline for these final results, until 
February 7, 2020.\8\
---------------------------------------------------------------------------

    \7\ See Memorandum to the Record from Gary Taverman, Deputy 
Assistant Secretary for Antidumping and Countervailing Duty 
Operations, performing the non-exclusive functions and duties of the 
Assistant Secretary for Enforcement and Compliance, ``Deadlines 
Affected by the Partial Shutdown of the Federal Government,'' dated 
January 28, 2019. All deadlines in this segment of the proceeding 
have been extended by 40 days.
    \8\ See Memorandum, ``Finished Carbon Steel Flanges from Spain: 
Extension of Time Limit for Final Results of Antidumping Duty 
Administrative Review, 2017-2018,'' dated November 18, 2019.
---------------------------------------------------------------------------

Scope of the Order 9
---------------------------------------------------------------------------

    \9\ See Finished Carbon Steel Flanges from Spain: Antidumping 
Duty Order, 82 FR 27229 (June 14, 2017) (the Order).
---------------------------------------------------------------------------

    The scope of the Order covers finished carbon steel flanges. 
Finished carbon steel flanges are currently classified under 
subheadings 7307.91.5010 and 7307.91.5050 of the Harmonized Tariff 
Schedule of the United States (HTSUS). They may also be entered under 
HTSUS subheadings 7307.91.5030 and 7307.91.5070. While HTSUS 
subheadings are provided for convenience and customs purposes, the 
written description of the scope of this Order is dispositive. A full 
description of the scope of the Order is contained in the Issues and 
Decision Memorandum,\10\ which is incorporated herein by reference. The 
Issues and Decision Memorandum is a public document and is on file 
electronically via Enforcement and Compliance's Antidumping and 
Countervailing Duty Centralized Electronic Service System (ACCESS). 
ACCESS is available to registered users at https://access.trade.gov and 
is available to all parties in the Central Records Unit, Room B8024 of 
the main Commerce building. In addition, a complete version of the 
Issues and Decision Memorandum can be accessed directly on the internet 
at https://enforcement.trade.gov/frn/. The signed Issues and 
Decision Memorandum and the electronic version of the Issues and 
Decision Memorandum are identical in content.
---------------------------------------------------------------------------

    \10\ See Memorandum, ``Issues and Decisions Memorandum for the 
Final Results of the Antidumping Duty Administrative Review: 
Finished Carbon Steel Flanges from Spain; 2017-2018,'' dated 
concurrently with this notice (Issues and Decisions Memorandum).
---------------------------------------------------------------------------

Analysis of Comments Received

    All issues raised in the case and rebuttal briefs filed by parties 
in this review are addressed in the Issues and Decision Memorandum. A 
list of the issues which parties raised, and to which we respond in the 
Issues and Decision Memorandum, follows in the appendix to this notice.

Changes Since the Preliminary Results

    Based on our analysis of the comments received, and for the reasons 
explained in the Issues and Decision Memorandum, Commerce made no 
changes in methodology to the Preliminary Results. However, based on 
our analysis of the comments received, and for the reasons explained in 
the Issues and Decision Memorandum, we made certain changes to ULMA's 
margin calculation.

Final Results of Administrative Review

    For these final results, we determine that the following weighted-
average dumping margins exist for the period February 8, 2017 through 
May 31, 2018:

------------------------------------------------------------------------
                                                               Weighted-
                                                                average
                    Exporter/manufacturer                       dumping
                                                                margin
                                                               (percent)
------------------------------------------------------------------------
ULMA Forja, S.Coop..........................................        4.47
Grupo Cunado................................................        4.47
Tubacero, S.L...............................................        4.47
Ateaciones De Metales Sinterizados S.A......................        4.47
Transglory S.A..............................................        4.47
Central Y Almacenes.........................................        4.47
------------------------------------------------------------------------

Rate for Non-Selected Respondents

    For the rate for non-selected respondents in an administrative 
review, generally, Commerce looks to section 735(c)(5) of the Act, 
which provides instructions for calculating the all-others rate in a 
market economy investigation. Under section 735(c)(5)(A) of the Act, 
the all-others rate is normally ``an amount equal to the weighted-
average of the estimated weighted-average dumping margins established 
for exporters and producers individually investigated, excluding any 
zero or de minimis margins, and any margins determined entirely {on the 
basis of facts available{time} .'' In this segment of the proceeding, 
we calculated a margin for ULMA that was not zero, de minimis, or based 
on facts available. Accordingly, we have applied the margin calculated 
for ULMA to the non-individually examined respondents.

Assessment

    Commerce shall determine and U.S. Customs and Border Protection 
(CBP) shall assess antidumping duties on all appropriate entries. 
Commerce will instruct CBP to apply an ad valorem assessment rate of 
4.47 percent to all entries of subject merchandise during the POR which 
were produced and/or exported by ULMA. Commerce will also instruct CBP 
to apply an ad valorem assessment rate of 4.47 percent to all entries 
of subject merchandise during the POR which were produced and/or 
exported by Grupo Cunado, Tubacero, S.L., Ateaciones De Metales 
Sinterizados S.A., Transglory S.A., and Central Y Almacenes. We intend 
to

[[Page 7921]]

issue assessment instructions directly to CBP 15 days after publication 
of the final results of this review.

Cash Deposit Requirements

    The following deposit requirements for estimated antidumping duties 
will be effective upon publication of the notice of these final results 
of review for all shipments of flanges from Spain entered, or withdrawn 
from warehouse, for consumption on or after the date of publication as 
provided by section 751(a)(2) of the Act: (1) The cash deposit rate for 
ULMA, Grupo Cunado, Tubacero, S.L., Ateaciones De Metales Sinterizados 
S.A., Transglory S.A., and Central Y Almacenes, will be 4.47 percent; 
(2) for merchandise exported by producers or exporters not covered in 
this review but covered in a prior segment of the proceeding, the cash 
deposit rate will continue to be the company-specific rate published 
for the most recent period; (3) if the exporter is not a firm covered 
in this review, a prior review, or the original investigation but the 
producer is, then the cash deposit rate will be the rate established 
for the most recent period for the producer of the merchandise; (4) the 
cash deposit rate for all other producers or exporters will continue to 
be 18.81 percent,\11\ the all-others rate established in the less-than-
fair-value investigation. These cash deposit requirements shall remain 
in effect until further notice.
---------------------------------------------------------------------------

    \11\ See the Order, 82 FR 27229.
---------------------------------------------------------------------------

Notification to Importers

    This notice serves as a final reminder to importers of their 
responsibility under 19 CFR 351.402(f)(2) to file a certificate 
regarding the reimbursement of antidumping duties and/or countervailing 
duties prior to liquidation of the relevant entries during this POR. 
Failure to comply with this requirement could result in Commerce's 
presumption that reimbursement of antidumping duties and/or 
countervailing duties occurred and the subsequent assessment of doubled 
antidumping duties.

Notification to Interested Parties Regarding Administrative Protective 
Order

    This notice also serves as the only reminder to parties subject to 
administrative protective order (APO) of their responsibility 
concerning the disposition of proprietary information disclosed under 
APO in accordance with 19 CFR 351.305(a)(3), which continues to govern 
business proprietary information in this segment of the proceeding. 
Timely written notification of the return or destruction of APO 
materials or conversion to judicial protective order is hereby 
requested. Failure to comply with the regulations and the terms of an 
APO is a sanctionable violation.

Notification to Interested Parties

    We are issuing and publishing notice of these final results in 
accordance with sections 751(a)(1) and 777(i)(1) of the Act and 19 CFR 
351.213(h).

    Dated: February 6, 2020.
Jeffrey I. Kessler,
Assistant Secretary for Enforcement and Compliance.

Appendix

List of Topics Discussed in the Issues and Decision Memorandum

I. Summary
II. Background
III. Scope of the Order
IV. Discussion of the Issues
    Comment 1: Scrap Offset
    Comment 2: Cost Reconciliation Difference
    Comment 3: Reconversion Income
    Comment 4: Programming Adjustments
V. Recommendation

[FR Doc. 2020-02777 Filed 2-11-20; 8:45 am]
 BILLING CODE 3510-DS-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.