Agency Information Collection Activities; Submission for OMB Review; Comment Request; Welding, Cutting, and Brazing Standard, 5252-5253 [2020-01506]
Download as PDF
<![CDATA[
5252
Federal Register / Vol. 85, No. 19 / Wednesday, January 29, 2020 / Notices
while they undergo review. For
additional substantive information
about this ICR, see the related notice
published in the Federal Register on
August 9, 2019 (84 FR 39373).
Interested parties are encouraged to
send comments to the OMB, Office of
Information and Regulatory Affairs at
the address shown in the ADDRESSES
section within thirty (30) days of
publication of this notice in the Federal
Register. In order to help ensure
appropriate consideration, comments
should mention OMB Control Number
1205–0238. The OMB is particularly
interested in comments that:
• Evaluate whether the proposed
collection of information is necessary
for the proper performance of the
functions of the agency, including
whether the information will have
practical utility;
• Evaluate the accuracy of the
agency’s estimate of the burden of the
proposed collection of information,
including the validity of the
methodology and assumptions used;
• Enhance the quality, utility, and
clarity of the information to be
collected; and
• Minimize the burden of the
collection of information on those who
are to respond, including through the
use of appropriate automated,
electronic, mechanical, or other
technological collection techniques or
other forms of information technology,
e.g., permitting electronic submission of
responses.
Agency: DOL–ETA.
Title of Collection: Income and
Eligibility Verification System
Confidentiality.
OMB Control Number: 1205–0238.
Affected Public: State, Local, and
Tribal Governments.
Total Estimated Number of
Respondents: 53.
Total Estimated Number of
Responses: 739,709.
Total Estimated Annual Time Burden:
16,164 hours.
Total Estimated Annual Other Costs
Burden: $0.
lotter on DSKBCFDHB2PROD with NOTICES
Authority: 44 U.S.C. 3507(a)(1)(D).
Dated: January 23, 2020.
Frederick Licari
Departmental Clearance Officer.
[FR Doc. 2020–01504 Filed 1–28–20; 8:45 am]
BILLING CODE 4510–FW–P
VerDate Sep<11>2014
17:27 Jan 28, 2020
Jkt 250001
Office of the Secretary
Agency Information Collection
Activities; Submission for OMB
Review; Comment Request; Welding,
Cutting, and Brazing Standard
Notice of availability; request
for comments.
ACTION:
The Department of Labor
(DOL) is submitting the Occupational
Safety and Health Administration
(OSHA) sponsored information
collection request (ICR) titled,
‘‘Welding, Cutting, and Brazing
Standard,’’ to the Office of Management
and Budget (OMB) for review and
approval for continued use, without
change, in accordance with the
Paperwork Reduction Act of 1995
(PRA). Public comments on the ICR are
invited.
DATES: The OMB will consider all
written comments that agency receives
on or before February 28, 2020.
ADDRESSES: A copy of this ICR with
applicable supporting documentation;
including a description of the likely
respondents, proposed frequency of
response, and estimated total burden
may be obtained free of charge from the
RegInfo.gov website at https://
www.reginfo.gov/public/do/
PRAViewICR?ref_nbr=201912-1218-008
(this link will only become active on the
day following publication of this notice)
or by contacting Frederick Licari by
telephone at 202–693–8073, TTY 202–
693–8064, (these are not toll-free
numbers) or by email at DOL_PRA_
PUBLIC@dol.gov.
Submit comments about this request
by mail to the Office of Information and
Regulatory Affairs, Attn: OMB Desk
Officer for DOL–OSHA, Office of
Management and Budget, Room 10235,
725 17th Street NW, Washington, DC
20503; by Fax: 202–395–5806 (this is
not a toll-free number); or by email:
OIRA_submission@omb.eop.gov.
Commenters are encouraged, but not
required, to send a courtesy copy of any
comments by mail or courier to the U.S.
Department of Labor—OASAM, Office
of the Chief Information Officer, Attn:
Departmental Information Compliance
Management Program, Room N1301,
200 Constitution Avenue NW,
Washington, DC 20210; or by email:
DOL_PRA_PUBLIC@dol.gov.
FOR FURTHER INFORMATION CONTACT:
Frederick Licari by telephone at 202–
693–8073, TTY 202–693–8064, (these
are not toll-free numbers) or by email at
DOL_PRA_PUBLIC@dol.gov.
SUMMARY:
PO 00000
Frm 00063
Fmt 4703
Sfmt 4703
This ICR
seeks to extend PRA authority for the
Welding, Cutting, and Brazing Standard
information collection. Regulation 29
CFR 1910.255(e) requires that qualified
maintenance personnel and a
certification record generated and
maintained make a periodic inspection
of resistance welding equipment. The
certification shall include the date of the
inspection, the signature of the person
who performed the inspection and the
serial number, or other identifier, for the
equipment inspected. The maintenance
inspection ensures that welding
equipment is in safe operating
condition, while the maintenance
record provides evidence that
employers performed the required
inspections. The Occupational Safety
and Health Act sections 2(b)(3) and 8(c)
authorize this information collection.
See 29 U.S.C. 651(b)(3), 657(c).
This information collection is subject
to the PRA. A Federal agency generally
cannot conduct or sponsor a collection
of information, and the public is
generally not required to respond to an
information collection, unless the OMB
under the PRA approves it and displays
a currently valid OMB Control Number.
In addition, notwithstanding any other
provisions of law, no person shall
generally be subject to penalty for
failing to comply with a collection of
information that does not display a
valid Control Number. See 5 CFR
1320.5(a) and 1320.6. The DOL obtains
OMB approval for this information
collection under Control Number 1218–
0207.
OMB authorization for an ICR cannot
be for more than three (3) years without
renewal, and the current approval for
this collection is scheduled to expire on
January 31, 2020. The DOL seeks to
extend PRA authorization for this
information collection for three (3) more
years, without any change to existing
requirements. The DOL notes that
existing information collection
requirements submitted to the OMB
receive a month-to-month extension
while they undergo review. For
additional substantive information
about this ICR, see the related notice
published in the Federal Register on
November 21, 2019 (84 FR 64348).
Interested parties are encouraged to
send comments to the OMB, Office of
Information and Regulatory Affairs at
the address shown in the ADDRESSES
section within thirty-(30) days of
publication of this notice in the Federal
Register. In order to help ensure
appropriate consideration, comments
should mention OMB Control Number
1218–0207. The OMB is particularly
interested in comments that:
SUPPLEMENTARY INFORMATION:
DEPARTMENT OF LABOR
E:\FR\FM\29JAN1.SGM
29JAN1
Federal Register / Vol. 85, No. 19 / Wednesday, January 29, 2020 / Notices
• Evaluate whether the proposed
collection of information is necessary
for the proper performance of the
functions of the agency, including
whether the information will have
practical utility:
• Evaluate the accuracy of the
agency’s estimate of the burden of the
proposed collection of information,
including the validity of the
methodology and assumptions used.
• Enhance the quality, utility, and
clarity of the information to be
collected; and
• Minimize the burden of the
collection of information on those who
are to respond, including through the
use of appropriate automated,
electronic, mechanical, or other
technological collection techniques or
other forms of information technology,
e.g., permitting electronic submission of
responses.
Agency: DOL–OSHA.
Title of Collection: Welding, Cutting,
and Brazing Standard.
OMB Control Number: 1218–0207.
Affected Public: Private Sector—
businesses or other for-profits.
Total Estimated Number of
Respondents: 20,627.
Total Estimated Number of
Responses: 82,508.
Total Estimated Annual Time Burden:
5,501 hours.
Total Estimated Annual Other Costs
Burden: $20,627.
Authority: 44 U.S.C. 3507(a)(1)(D).
Dated: January 23, 2020.
Frederick Licari,
Departmental Clearance Officer.
[FR Doc. 2020–01506 Filed 1–28–20; 8:45 am]
BILLING CODE 4510–26–P
DEPARTMENT OF LABOR
Office of the Secretary
Agency Information Collection
Activities; Submission for OMB
Review; Comment Request; Equal
Employment Opportunity in
Apprenticeship Training
Notice of availability; request
for comments.
ACTION:
The Department of Labor
(DOL) is submitting the Employment
and Training Administration (ETA)
sponsored information collection
request (ICR) revision titled, ‘‘Equal
Employment Opportunity in
Apprenticeship Training,’’ to the Office
of Management and Budget (OMB) for
review and approval for use in
accordance with the Paperwork
lotter on DSKBCFDHB2PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
17:27 Jan 28, 2020
Jkt 250001
Reduction Act (PRA) of 1995. Public
comments on the ICR are invited.
DATES: The OMB will consider all
written comments that agency receives
on or before February 28, 2020.
ADDRESSES: A copy of this ICR with
applicable supporting documentation;
including a description of the likely
respondents, proposed frequency of
response, and estimated total burden
may be obtained free of charge from the
RegInfo.gov website at https://
www.reginfo.gov/public/do/
PRAViewICR?ref_nbr=201912-1205-001
(this link will only become active on the
day following publication of this notice)
or by contacting Frederick Licari by
telephone at 202–693–8073, TTY 202–
693–8064, (these are not toll-free
numbers) or sending an email to DOL_
PRA_PUBLIC@dol.gov.
Submit comments about this request
by mail to the Office of Information and
Regulatory Affairs, Attn: OMB Desk
Officer for DOL–ETA, Office of
Management and Budget, Room 10235,
725 17th Street NW, Washington, DC
20503; by Fax: 202–395–5806 (this is
not a toll-free number); or by email:
OIRA_submission@omb.eop.gov.
Commenters are encouraged, but not
required, to send a courtesy copy of any
comments by mail or courier to the U.S.
Department of Labor-OASAM, Office of
the Chief Information Officer, Attn:
Departmental Information Compliance
Management Program, Room N1301,
200 Constitution Avenue NW,
Washington, DC 20210; or by email:
DOL_PRA_PUBLIC@dol.gov.
FOR FURTHER INFORMATION CONTACT:
Frederick Licari by telephone at 202–
693–8073, TTY 202–693–8064, (these
are not toll-free numbers) or sending an
email to DOL_PRA_PUBLIC@dol.gov.
SUPPLEMENTARY INFORMATION: This ICR
seeks approval under the PRA for
revisions to the Equal Employment
Opportunity in Apprenticeship
Training. Title 29 CFR part 30 sets forth
policies and procedures to promote
equality of opportunity in
apprenticeship programs registered with
the U.S. Department of Labor (the
Department) and recognized State
Apprenticeship Agencies. Among other
things, these policies and procedures
apply to the recruitment and selection
of apprentices, and to the conditions of
employment and training during
apprenticeship. The procedures also
provide for reviewing apprenticeship
programs, for processing complaints,
and for deregistering non-complying
apprenticeship programs. The part 30
regulations also provide policies and
procedures for continuation or
withdrawal of recognition of State
PO 00000
Frm 00064
Fmt 4703
Sfmt 4703
5253
Apprenticeship Agencies (SAAs) which
register apprenticeship programs for
Federal purposes. This information
collection is a revision, because it
includes: (1) Minor edits for clarity; (2)
an update to the Office of
Apprenticeship’s room number; (3) a
correction to the number of days (i.e.,
300) that a complaint must be filed as
required under part 30; (4) an update to
the list of bases for complaints to
include disability, age (40 or older),
genetic information, sex (including
pregnancy and gender identity), sexual
orientation, and retaliation; (5) the
removal of the definitions of protected
bases to be consistent with the practices
of other agencies of the Department; and
(6) to clarify that the non-retaliation
language applies to both employers and
sponsors. The annual burden for this
information collection increased from
16,097 hours to 191,355 hours resulting
in an increase of 175,258 hours over
ETA’s previous estimate, which OMB
approved until January 31, 2020. Unlike
ETA’s previous estimate, the annual
burden for this information collection is
calculated for all program sponsors and
not just new ones since there are
ongoing burdens that all sponsors need
to undertake annually.
This information collection is subject
to the PRA. A Federal agency generally
cannot conduct or sponsor a collection
of information, and the public is
generally not required to respond to an
information collection, unless the OMB,
under the PRA, approves it and displays
a currently valid OMB Control Number.
In addition, notwithstanding any other
provisions of law, no person shall
generally be subject to penalty for
failing to comply with a collection of
information that does not display a
valid OMB Control Number. See 5 CFR
1320.5(a) and 1320.6. The DOL obtains
OMB approval for this information
collection under Control Number 1205–
0224. The current approval is scheduled
to expire on January 31, 2020; however,
the DOL notes that existing information
collection requirements submitted to the
OMB will receive a month-to-month
extension while they undergo review.
New requirements would only take
effect upon OMB approval. For
additional substantive information
about this ICR, see the related notice
published in the Federal Register on
November 21, 2019 (84 FR 64340).
Interested parties are encouraged to
send comments to the OMB, Office of
Information and Regulatory Affairs at
the address shown in the ADDRESSES
section within thirty (30) days of
publication of this notice in the Federal
Register. In order to help ensure
appropriate consideration, comments
E:\FR\FM\29JAN1.SGM
29JAN1
]]>Agencies
[Federal Register Volume 85, Number 19 (Wednesday, January 29, 2020)]
[Notices]
[Pages 5252-5253]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-01506]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Office of the Secretary
Agency Information Collection Activities; Submission for OMB
Review; Comment Request; Welding, Cutting, and Brazing Standard
ACTION: Notice of availability; request for comments.
-----------------------------------------------------------------------
SUMMARY: The Department of Labor (DOL) is submitting the Occupational
Safety and Health Administration (OSHA) sponsored information
collection request (ICR) titled, ``Welding, Cutting, and Brazing
Standard,'' to the Office of Management and Budget (OMB) for review and
approval for continued use, without change, in accordance with the
Paperwork Reduction Act of 1995 (PRA). Public comments on the ICR are
invited.
DATES: The OMB will consider all written comments that agency receives
on or before February 28, 2020.
ADDRESSES: A copy of this ICR with applicable supporting documentation;
including a description of the likely respondents, proposed frequency
of response, and estimated total burden may be obtained free of charge
from the RegInfo.gov website at https://www.reginfo.gov/public/do/PRAViewICR?ref_nbr=201912-1218-008 (this link will only become active
on the day following publication of this notice) or by contacting
Frederick Licari by telephone at 202-693-8073, TTY 202-693-8064, (these
are not toll-free numbers) or by email at [email protected].
Submit comments about this request by mail to the Office of
Information and Regulatory Affairs, Attn: OMB Desk Officer for DOL-
OSHA, Office of Management and Budget, Room 10235, 725 17th Street NW,
Washington, DC 20503; by Fax: 202-395-5806 (this is not a toll-free
number); or by email: [email protected]. Commenters are
encouraged, but not required, to send a courtesy copy of any comments
by mail or courier to the U.S. Department of Labor--OASAM, Office of
the Chief Information Officer, Attn: Departmental Information
Compliance Management Program, Room N1301, 200 Constitution Avenue NW,
Washington, DC 20210; or by email: [email protected].
FOR FURTHER INFORMATION CONTACT: Frederick Licari by telephone at 202-
693-8073, TTY 202-693-8064, (these are not toll-free numbers) or by
email at [email protected].
SUPPLEMENTARY INFORMATION: This ICR seeks to extend PRA authority for
the Welding, Cutting, and Brazing Standard information collection.
Regulation 29 CFR 1910.255(e) requires that qualified maintenance
personnel and a certification record generated and maintained make a
periodic inspection of resistance welding equipment. The certification
shall include the date of the inspection, the signature of the person
who performed the inspection and the serial number, or other
identifier, for the equipment inspected. The maintenance inspection
ensures that welding equipment is in safe operating condition, while
the maintenance record provides evidence that employers performed the
required inspections. The Occupational Safety and Health Act sections
2(b)(3) and 8(c) authorize this information collection. See 29 U.S.C.
651(b)(3), 657(c).
This information collection is subject to the PRA. A Federal agency
generally cannot conduct or sponsor a collection of information, and
the public is generally not required to respond to an information
collection, unless the OMB under the PRA approves it and displays a
currently valid OMB Control Number. In addition, notwithstanding any
other provisions of law, no person shall generally be subject to
penalty for failing to comply with a collection of information that
does not display a valid Control Number. See 5 CFR 1320.5(a) and
1320.6. The DOL obtains OMB approval for this information collection
under Control Number 1218-0207.
OMB authorization for an ICR cannot be for more than three (3)
years without renewal, and the current approval for this collection is
scheduled to expire on January 31, 2020. The DOL seeks to extend PRA
authorization for this information collection for three (3) more years,
without any change to existing requirements. The DOL notes that
existing information collection requirements submitted to the OMB
receive a month-to-month extension while they undergo review. For
additional substantive information about this ICR, see the related
notice published in the Federal Register on November 21, 2019 (84 FR
64348).
Interested parties are encouraged to send comments to the OMB,
Office of Information and Regulatory Affairs at the address shown in
the ADDRESSES section within thirty-(30) days of publication of this
notice in the Federal Register. In order to help ensure appropriate
consideration, comments should mention OMB Control Number 1218-0207.
The OMB is particularly interested in comments that:
[[Page 5253]]
Evaluate whether the proposed collection of information is
necessary for the proper performance of the functions of the agency,
including whether the information will have practical utility:
Evaluate the accuracy of the agency's estimate of the
burden of the proposed collection of information, including the
validity of the methodology and assumptions used.
Enhance the quality, utility, and clarity of the
information to be collected; and
Minimize the burden of the collection of information on
those who are to respond, including through the use of appropriate
automated, electronic, mechanical, or other technological collection
techniques or other forms of information technology, e.g., permitting
electronic submission of responses.
Agency: DOL-OSHA.
Title of Collection: Welding, Cutting, and Brazing Standard.
OMB Control Number: 1218-0207.
Affected Public: Private Sector--businesses or other for-profits.
Total Estimated Number of Respondents: 20,627.
Total Estimated Number of Responses: 82,508.
Total Estimated Annual Time Burden: 5,501 hours.
Total Estimated Annual Other Costs Burden: $20,627.
Authority: 44 U.S.C. 3507(a)(1)(D).
Dated: January 23, 2020.
Frederick Licari,
Departmental Clearance Officer.
[FR Doc. 2020-01506 Filed 1-28-20; 8:45 am]
BILLING CODE 4510-26-P
