Capital, Margin, and Segregation Requirements for Security-Based Swap Dealers and Major Security-Based Swap Participants and Capital and Segregation Requirements for Broker-Dealers; Correction, 55055 [2019-22053]
Download as PDF
Federal Register / Vol. 84, No. 199 / Tuesday, October 15, 2019 / Rules and Regulations
(3) Observer present. Conduct halibut
deck sorting only when an observer is
present in the deck sampling station.
(4) Time limit. Conduct halibut deck
sorting only within the time limit
indicated on the Observer Sampling
Station Inspection Report. The time
limit begins when the codend is opened
on deck. When the time limit is reached,
all halibut deck sorting must stop.
(5) Single sorting pathway. Convey all
halibut sorted on deck to the observer
deck sampling station via a single
pathway.
(6) Careful handling. Handle all
halibut sorted on deck with a minimum
of injury.
(7) Sorting pace. Do not pressure or
rush the observer to move halibut
through the sampling process faster than
the observer can handle.
(8) Visual signal. Use a visual signal
to indicate to vessel crew when catch
may not to be weighed on a NMFSapproved scale specified in paragraph
(b)(1) of this section. The visual signal
must be on the conveyor belt adjacent
to the flow scale and visible in the view
of a camera required at § 679.28(b)(8).
§ 679.121
[Reserved]
[FR Doc. 2019–22198 Filed 10–11–19; 8:45 am]
DATES:
Effective October 21, 2019.
FOR FURTHER INFORMATION CONTACT:
29 CFR Part 4022
In FR Doc.
19–13609 appearing on page 43872 in
the Federal Register of Thursday,
August 22, 2019, the following
corrections are made:
AGENCY:
§ 200.30–3
[Corrected]
1. On page 44041, in the first column,
in part 200, in amendment 2, the
instruction ‘‘Section 200.30–3 is
amended by revising paragraphs (a)(7)
introductory text, (a)(7)(i) and (iv),
(a)(7)(vi)(A) and (C) through (F),
(a)(7)(vii) and (a)(10)(i) to read as
follows:’’ is corrected to read ‘‘Section
200.30–3 is amended by revising
paragraphs (a)(7) introductory text,
(a)(7)(i) and (iv), (a)(7)(vi)(A) and (C)
through (E), adding paragraphs
(a)(7)(vi)(F) and (a)(7)(vii), and revising
paragraph (a)(10)(i) to read as follows:’’
■
Part 240 [Corrected]
BILLING CODE 3510–22–P
2. On page 44041, in the third column,
in part 240, in amendment 3, the
instruction ‘‘The general authority
citation for part 240 is revised, the
sectional authorities for §§ 240.15c3–1
and 240.15c3–3 are revised, adding
sectional authorities for §§ 240.15c3–1a,
240.15c3–1e, 240.15c3–3, 240.18a–1,
240.18a–1a, 240.18a–1b, 240.18a–1c,
240.18a–1d, 240–18a–2, 240.18a–3 and
240.18a–4 in numerical order to read as
follows.’’ is corrected to read ‘‘The
general authority citation for part 240 is
revised, the sectional authorities for
§§ 240.15c3–1 and 240.15c3–3 are
revised, and sectional authorities for
§§ 240.18a–1, 240.18a–1a, 240.18a–1b,
240.18a–1c, 240.18a–1d, 240–18a–2,
240.18a–3, and 240.18a–10 and
§ 240.18a–4 are added in numerical
order to read as follows:’’
■
SECURITIES AND EXCHANGE
COMMISSION
17 CFR Parts 200 and 240
[Release No. 34–86175A; File No. S7–08–
12]
RIN 3235–AL12
Capital, Margin, and Segregation
Requirements for Security-Based
Swap Dealers and Major SecurityBased Swap Participants and Capital
and Segregation Requirements for
Broker-Dealers; Correction
Securities and Exchange
Commission.
ACTION: Final rule; correction.
AGENCY:
The Commission is correcting
a final rule that appeared in the Federal
Register on August 22, 2019. In the
document, the Commission adopted
capital and margin requirements for
security-based swap dealers (‘‘SBSDs’’)
and major security-based swap
participants (‘‘MSBSPs’’), segregation
requirements for SBSDs, and
notification requirements with respect
to segregation for SBSDs and MSBSPs in
accordance with the Dodd-Frank Wall
Street Reform and Consumer Protection
Act.
khammond on DSKJM1Z7X2PROD with RULES
SUMMARY:
VerDate Sep<11>2014
15:53 Oct 11, 2019
Jkt 250001
PENSION BENEFIT GUARANTY
CORPORATION
Sheila Dombal Swartz, Senior Special
Counsel, at (202) 551–5545; Division of
Trading and Markets, Securities and
Exchange Commission, 100 F Street NE,
Washington, DC 20549–7010.
SUPPLEMENTARY INFORMATION:
Dated: October 4, 2019.
Vanessa A. Countryman,
Secretary.
[FR Doc. 2019–22053 Filed 10–11–19; 8:45 am]
BILLING CODE 8011–01–P
PO 00000
Frm 00039
Fmt 4700
Sfmt 4700
55055
Benefits Payable in Terminated SingleEmployer Plans; Interest Assumptions
for Paying Benefits
Pension Benefit Guaranty
Corporation.
ACTION: Final rule.
This final rule amends the
Pension Benefit Guaranty Corporation’s
regulation on Benefits Payable in
Terminated Single-Employer Plans to
prescribe certain interest assumptions
under the regulation for plans with
valuation dates in November 2019.
These interest assumptions are used for
paying certain benefits under
terminating single-employer plans
covered by the pension insurance
system administered by PBGC.
DATES: Effective November 1, 2019.
FOR FURTHER INFORMATION CONTACT:
Gregory Katz (katz.gregory@pbgc.gov),
Attorney, Regulatory Affairs Division,
Pension Benefit Guaranty Corporation,
1200 K Street NW, Washington, DC
20005, 202–326–4400 ext. 3829. (TTY
users may call the Federal relay service
toll-free at 1–800–877–8339 and ask to
be connected to 202–326–4400, ext.
3829.)
SUMMARY:
PBGC’s
regulation on Benefits Payable in
Terminated Single-Employer Plans (29
CFR part 4022) prescribes actuarial
assumptions—including interest
assumptions—for paying plan benefits
under terminated single-employer plans
covered by title IV of the Employee
Retirement Income Security Act of 1974
(ERISA). The interest assumptions in
the regulation are also published on
PBGC’s website (https://www.pbgc.gov).
PBGC uses the interest assumptions in
appendix B to part 4022 (‘‘Lump Sum
Interest Rates for PBGC Payments’’) to
determine whether a benefit is payable
as a lump sum and to determine the
amount to pay. Because some privatesector pension plans use these interest
rates to determine lump sum amounts
payable to plan participants (if the
resulting lump sum is larger than the
amount required under section 417(e)(3)
of the Internal Revenue Code and
section 205(g)(3) of ERISA), these rates
are also provided in appendix C to part
4022 (‘‘Lump Sum Interest Rates for
Private-Sector Payments’’).
This final rule updates appendices B
and C of the benefits payment regulation
to provide the rates for November 2019
measurement dates.
SUPPLEMENTARY INFORMATION:
E:\FR\FM\15OCR1.SGM
15OCR1
Agencies
[Federal Register Volume 84, Number 199 (Tuesday, October 15, 2019)]
[Rules and Regulations]
[Page 55055]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-22053]
=======================================================================
-----------------------------------------------------------------------
SECURITIES AND EXCHANGE COMMISSION
17 CFR Parts 200 and 240
[Release No. 34-86175A; File No. S7-08-12]
RIN 3235-AL12
Capital, Margin, and Segregation Requirements for Security-Based
Swap Dealers and Major Security-Based Swap Participants and Capital and
Segregation Requirements for Broker-Dealers; Correction
AGENCY: Securities and Exchange Commission.
ACTION: Final rule; correction.
-----------------------------------------------------------------------
SUMMARY: The Commission is correcting a final rule that appeared in the
Federal Register on August 22, 2019. In the document, the Commission
adopted capital and margin requirements for security-based swap dealers
(``SBSDs'') and major security-based swap participants (``MSBSPs''),
segregation requirements for SBSDs, and notification requirements with
respect to segregation for SBSDs and MSBSPs in accordance with the
Dodd-Frank Wall Street Reform and Consumer Protection Act.
DATES: Effective October 21, 2019.
FOR FURTHER INFORMATION CONTACT: Sheila Dombal Swartz, Senior Special
Counsel, at (202) 551-5545; Division of Trading and Markets, Securities
and Exchange Commission, 100 F Street NE, Washington, DC 20549-7010.
SUPPLEMENTARY INFORMATION: In FR Doc. 19-13609 appearing on page 43872
in the Federal Register of Thursday, August 22, 2019, the following
corrections are made:
Sec. 200.30-3 [Corrected]
0
1. On page 44041, in the first column, in part 200, in amendment 2, the
instruction ``Section 200.30-3 is amended by revising paragraphs (a)(7)
introductory text, (a)(7)(i) and (iv), (a)(7)(vi)(A) and (C) through
(F), (a)(7)(vii) and (a)(10)(i) to read as follows:'' is corrected to
read ``Section 200.30-3 is amended by revising paragraphs (a)(7)
introductory text, (a)(7)(i) and (iv), (a)(7)(vi)(A) and (C) through
(E), adding paragraphs (a)(7)(vi)(F) and (a)(7)(vii), and revising
paragraph (a)(10)(i) to read as follows:''
Part 240 [Corrected]
0
2. On page 44041, in the third column, in part 240, in amendment 3, the
instruction ``The general authority citation for part 240 is revised,
the sectional authorities for Sec. Sec. 240.15c3-1 and 240.15c3-3 are
revised, adding sectional authorities for Sec. Sec. 240.15c3-1a,
240.15c3-1e, 240.15c3-3, 240.18a-1, 240.18a-1a, 240.18a-1b, 240.18a-1c,
240.18a-1d, 240-18a-2, 240.18a-3 and 240.18a-4 in numerical order to
read as follows.'' is corrected to read ``The general authority
citation for part 240 is revised, the sectional authorities for
Sec. Sec. 240.15c3-1 and 240.15c3-3 are revised, and sectional
authorities for Sec. Sec. 240.18a-1, 240.18a-1a, 240.18a-1b, 240.18a-
1c, 240.18a-1d, 240-18a-2, 240.18a-3, and 240.18a-10 and Sec. 240.18a-
4 are added in numerical order to read as follows:''
Dated: October 4, 2019.
Vanessa A. Countryman,
Secretary.
[FR Doc. 2019-22053 Filed 10-11-19; 8:45 am]
BILLING CODE 8011-01-P