Certain Hot-Rolled Carbon Steel Flat Products From India and Indonesia: Final Results of Expedited Sunset Reviews of the Countervailing Duty Orders, 27242-27243 [2019-12405]
Download as PDF
<![CDATA[
27242
Federal Register / Vol. 84, No. 113 / Wednesday, June 12, 2019 / Notices
19 CFR 351.218(d)(3)(i).4 However,
Commerce did not receive a substantive
response from any government or
respondent interested party with respect
to the orders covered by these sunset
reviews. As a result, pursuant to section
751(c)(3)(B) of the Act and 19 CFR
351.218(e)(1)(ii)(C)(2), Commerce has
conducted expedited (120-day) sunset
reviews of the Orders.
DEPARTMENT OF COMMERCE
International Trade Administration
[C–533–821, C–560–813]
Certain Hot-Rolled Carbon Steel Flat
Products From India and Indonesia:
Final Results of Expedited Sunset
Reviews of the Countervailing Duty
Orders
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: Based on five-year reviews
(sunset reviews), the Department of
Commerce (Commerce) finds that
revocation of the countervailing duty
(CVD) orders on certain hot-rolled
carbon steel flat products (hot-rolled
steel) from India and Indonesia would
be likely to lead to the continuation or
recurrence of a countervailable subsidy
at the levels indicated in the ‘‘Final
Results of Review’’ section of this
notice.
DATES: Applicable June 12, 2019.
FOR FURTHER INFORMATION CONTACT: Jean
Valdez, AD/CVD Operations, Office III,
Enforcement and Compliance,
International Trade Administration,
U.S. Department of Commerce, 1401
Constitution Avenue NW, Washington,
DC 20230; telephone: (202) 482–3855.
SUPPLEMENTARY INFORMATION:
AGENCY:
jbell on DSK3GLQ082PROD with NOTICES
Background
On February 5, 2019, Commerce
initiated sunset reviews of the CVD
orders 1 on hot-rolled steel from India
and Indonesia, pursuant to section
751(c) of the Tariff Act of 1930, as
amended (the Act).2 On February 20,
2019, Nucor Corporation, AK Steel
Corporation, ArcelorMittal USA LLC,
United States Steel Corporation,
California Steel Industries, SSAB
Enterprises LLC, and Steel Dynamics,
Inc. (collectively, domestic interested
parties) filed timely notices of intent to
participate, in accordance with 19 CFR
351.218(d)(1).3 The domestic interested
parties claimed interested party status
under section 771(9)(C) of the Act.
On March 7, 2019, Commerce
received adequate substantive responses
from the domestic interested parties
within the 30-day deadline specified in
1 See Notice of Amended Final Determination and
Notice of Countervailing Duty Orders: Certain HotRolled Carbon Steel Flat Products from India and
Indonesia, 66 FR 60198 (December 3, 2001)
(Orders).
2 See Initiation of Five-Year (‘‘Sunset’’) Reviews,
77 FR 1705 (February 5, 2019) (Initiation Notice).
3 See domestic interested parties’ letter, ‘‘Certain
Hot-Rolled Carbon Steel Flat Products from India:
Notice of Intent to Participate,’’ dated February 20,
2019.
VerDate Sep<11>2014
17:00 Jun 11, 2019
Jkt 247001
Scope of the Orders
The merchandise subject to these
orders is hot-rolled steel of a rectangular
shape, with a width of 0.5 inch or
greater, neither clad, plated, nor coated
with metal and whether or not painted,
varnished, or coated with plastics or
other non-metallic substances, in coils
(whether or not in successively
superimposed layers), regardless of
thickness, and in straight lengths, of a
thickness of less than 4.75 mm and of
a width measuring at least 10 times the
thickness. Universal mill plate (i.e., flatrolled products rolled on four faces or
in a closed box pass, of a width
exceeding 150 mm, but not exceeding
1,250 mm, and of a thickness of not less
than 4 mm, not in coils and without
patterns in relief) of a thickness not less
than 4.0 mm is not included within the
scope of these orders.
Specifically included within the
scope of these orders are vacuum
degassed, fully stabilized (commonly
referred to as interstitial-free (IF)) steels,
high strength low alloy (HSLA) steels,
and the substrate for motor lamination
steels. IF steels are recognized as low
carbon steels with micro-alloying levels
of elements such as titanium or niobium
(also commonly referred to as
columbium), or both, added to stabilize
carbon and nitrogen elements. HSLA
steels are recognized as steels with
micro-alloying levels of elements such
as chromium, copper, niobium,
vanadium, and molybdenum. The
substrate for motor lamination steels
contains micro-alloying levels of
elements such as silicon and aluminum.
Steel products included in the scope
of the orders, regardless of definitions in
the Harmonized Tariff Schedule of the
United States (HTSUS), are products in
which: (i) Iron predominates, by weight,
over each of the other contained
elements; (ii) the carbon content is 2
percent or less, by weight; and (iii) none
of the elements listed below exceeds the
quantity, by weight, respectively
indicated:
1.80 percent of manganese, or
4 See domestic interested parties’ letter, ‘‘Certain
Hot-Rolled Carbon Steel Flat Products from India:
Substantive Response to Notice of Initiation,’’ dated
March 7, 2019 (Substantive Response).
PO 00000
Frm 00012
Fmt 4703
Sfmt 4703
2.25 percent of silicon, or
1.00 percent of copper, or
0.50 percent of aluminum, or
1.25 percent of chromium, or
0.30 percent of cobalt, or
0.40 percent of lead, or
1.25 percent of nickel, or
0.30 percent of tungsten, or
0.10 percent of molybdenum, or
0.10 percent of niobium, or
0.15 percent of vanadium, or
0.15 percent of zirconium.
All products that meet the physical
and chemical descriptions provided
above are within the scope of the orders
unless otherwise excluded. The
following products, by way of example,
are outside or specifically excluded
from the scope of the orders:
• Alloy hot-rolled steel products in
which at least one of the chemical
elements exceeds those listed above
(including, 3, American Society for
Testing and Materials (ASTM)
specifications A543, A387, A514, A517,
A506).
• Society of Automotive Engineers
(SAE)/American Iron & Steel Institute
(AISI) grades of series 2300 and higher.
• Ball bearings steels, as defined in
the HTSUS.
• Tool steels, as defined in the
HTSUS.
• Silico-manganese (as defined in the
HTSUS) or silicon electrical steel with
a silicon level exceeding 2.25 percent.
• ASTM specifications A710 and
A736.
• USS Abrasion-resistant steels (USS
AR 400, USS AR 500).
• All products (proprietary or
otherwise) based on an alloy ASTM
specification (sample specifications:
ASTM A506, A507).
• Non-rectangular shapes, not in
coils, which are the result of having
been processed by cutting or stamping
and which have assumed the character
of articles or products classified outside
chapter 72 of the HTSUS.
The merchandise subject to the orders
is classified in the HTSUS at
subheadings: 7208.10.15.00,
7208.10.30.00, 7208.10.60.00,
7208.25.30.00, 7208.25.60.00,
7208.26.00.30, 7208.26.00.60,
7208.27.00.30, 7208.27.00.60,
7208.36.00.30, 7208.36.00.60,
7208.37.00.30, 7208.37.00.60,
7208.38.00.15, 7208.38.00.30,
7208.38.00.90, 7208.39.00.15,
7208.39.00.30, 7208.39.00.90,
7208.40.60.30, 7208.40.60.60,
7208.53.00.00, 7208.54.00.00,
7208.90.00.00, 7211.14.00.90,
7211.19.15.00, 7211.19.20.00,
7211.19.30.00, 7211.19.45.00,
7211.19.60.00, 7211.19.75.30,
7211.19.75.60, and 7211.19.75.90.
E:\FR\FM\12JNN1.SGM
12JNN1
Federal Register / Vol. 84, No. 113 / Wednesday, June 12, 2019 / Notices
Certain hot-rolled carbon steel flat
products covered by the orders,
including vacuum degassed fully
stabilized, high strength low alloy, and
the substrate for motor lamination steel,
may also enter under the following tariff
numbers: 7225.11.00.00, 7225.19.00.00,
7225.30.30.50, 7225.30.70.00,
7225.40.70.00, 7225.99.00.90,
7226.11.10.00, 7226.11.90.30,
7226.11.90.60, 7226.19.10.00,
7226.19.90.00, 7226.91.50.00,
7226.91.70.00, 7226.91.80.00, and
7226.99.00.00. Subject merchandise
may also enter under 7210.70.30.00,
7210.90.90.00, 7211.14.00.30,
7212.40.10.00, 7212.40.50.00, and
7212.50.00.00. Although the HTSUS
numbers are provided for convenience
and customs purposes, the written
product description remains dispositive.
Analysis of Comments Received
All issues raised in these reviews are
addressed in the Issues and Decision
Memorandum.5 A list of the topics
discussed in the Issues and Decision
Memorandum is attached to this notice
as an Appendix. The Issues and
Decision Memorandum is a public
document and is on file electronically
via Enforcement and Compliance’s
Antidumping and Countervailing Duty
Centralized Electronic Service System
(ACCESS). ACCESS is available to
registered users at https://
access.trade.gov and is available to all
parties in the Central Records Unit,
Room B8024 of the main Department of
Commerce building. In addition, a
complete version of the Issues and
Decision Memorandum can be accessed
directly at https://enforcement.trade.gov/
frn/. The signed and electronic versions
of the Issues and Decision
Memorandum are identical in content.
Final Results of Reviews
Commerce determines that revocation
of the Orders would be likely to lead to
continuation or recurrence of a
countervailable subsidy at the rates
listed below: 6
Producers/exporters
India:
Essar Steel Limited ...........
Net
countervailable
subsidy rate
(percent)
jbell on DSK3GLQ082PROD with NOTICES
memorandum, ‘‘Final Results of Expedited
Third Sunset Reviews of the Countervailing Duty
Orders on Certain Hot-Rolled Carbon Steel Flat
Products from India and Indonesia,’’ dated
concurrently with, and hereby adopted by, this
notice (Issues and Decision Memorandum).
6 See Certain Hot-Rolled Carbon Steel Flat
Products from India: Implementation of
Determinations Under Section 129 of the Uruguay
Round Agreements Act, 81 FR 27412 (May 6, 2016).
17:00 Jun 11, 2019
Producers/exporters
Ispat Industries Limited .....
Steel Authority of India .....
Tata Iron and Steel Company Limited ..................
All other producers/manufacturers/exporters ........
Indonesia:
P.T. Krakatau Steel ..........
All Others ..........................
360.23
346.61
337.51
344.44
10.21
10.21
Notification Regarding Administrative
Protective Order
This notice serves as the only
reminder to parties subject to
administrative protective order (APO) of
their responsibility concerning the
return or destruction of proprietary
information disclosed under APO in
accordance with 19 CFR 351.305.
Timely notification of return/
destruction of APO materials or
conversion to judicial protective order is
hereby requested. Failure to comply
with the regulations and the terms of an
APO is a sanctionable violation.
We are issuing and publishing the
results and notice in accordance with
sections 75l(c), 752, and 777(i)(1) of the
Act.
Dated: June 5, 2019.
Jeffrey I. Kessler,
Assistant Secretary for Enforcement and
Compliance.
Appendix—List of Topics Discussed in
the Issues and Decision Memorandum
I. Summary
II. Background
III. History of the Orders
IV. Discussion of the Issues
1. Likelihood of Continuation or
Recurrence of a Countervailable Subsidy
2. Net Countervailable Subsidy Likely To
Prevail
3. Nature of the Subsidy
V. Final Results of Reviews
VI. Recommendation
[FR Doc. 2019–12405 Filed 6–11–19; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–533–823, A–834–807, A–307–820]
336.62
5 See
VerDate Sep<11>2014
Net
countervailable
subsidy rate
(percent)
Jkt 247001
Silicomanganese From India,
Kazakhstan, and Venezuela:
Continuation of the Antidumping Duty
Orders
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: As a result of the
determinations by the Department of
AGENCY:
PO 00000
Frm 00013
Fmt 4703
Sfmt 4703
27243
Commerce (Commerce) and the
International Trade Commission (ITC)
that revocation of the antidumping duty
(AD) orders on silicomanganese from
India, Kazakhstan, and Venezuela
would be likely to lead to a continuation
or recurrence of dumping and material
injury to an industry in the United
States, Commerce is publishing a notice
of continuation of these AD orders.
DATES: Applicable June 12, 2019.
FOR FURTHER INFORMATION CONTACT:
Thomas Dunne or Jacqueline
Arrowsmith AD/CVD Operations, Office
VII, Enforcement and Compliance,
International Trade Administration,
U.S. Department of Commerce, 1401
Constitution Avenue NW, Washington,
DC 20230; telephone: (202) 482–2328 or
(202) 482–5255, respectively.
SUPPLEMENTARY INFORMATION:
Background
On September 11, 2018, Commerce
published the notice of initiation of the
third sunset reviews of the Orders 1 on
silicomanganese from India,
Kazakhstan, and Venezuela, pursuant to
section 751(c) of the Tariff Act of 1930,
as amended (the Act).2 As a result of its
reviews, on December 17, 2018,
Commerce determined that revocation
of the Orders on silicomanganese from
India, Kazakhstan, and Venezuela
would likely lead to the continuation or
recurrence of dumping.3 Commerce,
therefore, notified the ITC of the
magnitude of the margins of dumping
likely to prevail were the Orders
revoked.4
On April 23, 2019, the ITC published
its determinations, pursuant to sections
751(c) and 752 of the Act, that
revocation of the Orders on
silicomanganese from India,
Kazakhstan, and Venezuela would
likely lead to continuation or recurrence
of material injury to an industry in the
United States within a reasonably
foreseeable time.5
Scope of the Orders
For purposes of these orders, the
products covered are all forms, sizes
and compositions of silicomanganese,
1 See Notice of Amended Final Determination of
Sales at Less than Fair Value and Antidumping
Duty Orders: Silicomanganese from India,
Kazakhstan, and Venezuela, 67 FR 36149, (May 23,
2002) (Orders).
2 See Initiation of Five-Year (Sunset) Reviews, 83
FR 45887 (September 11, 2018).
3 See Silicomanganese from India, Kazakhstan,
and Venezuela: Final Results of Expedited Third
Sunset Reviews of the Antidumping Duty Orders, 83
FR 64525, (December 17, 2018) and accompanying
Issues and Decision Memorandum (IDM).
4 Id.
5 See Silicomanganese from India, Kazakhstan,
and Venezuela, 84 FR 16882 (April 23, 2019).
E:\FR\FM\12JNN1.SGM
12JNN1
]]>Agencies
[Federal Register Volume 84, Number 113 (Wednesday, June 12, 2019)]
[Notices]
[Pages 27242-27243]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-12405]
[[Page 27242]]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
[C-533-821, C-560-813]
Certain Hot-Rolled Carbon Steel Flat Products From India and
Indonesia: Final Results of Expedited Sunset Reviews of the
Countervailing Duty Orders
AGENCY: Enforcement and Compliance, International Trade Administration,
Department of Commerce.
SUMMARY: Based on five-year reviews (sunset reviews), the Department of
Commerce (Commerce) finds that revocation of the countervailing duty
(CVD) orders on certain hot-rolled carbon steel flat products (hot-
rolled steel) from India and Indonesia would be likely to lead to the
continuation or recurrence of a countervailable subsidy at the levels
indicated in the ``Final Results of Review'' section of this notice.
DATES: Applicable June 12, 2019.
FOR FURTHER INFORMATION CONTACT: Jean Valdez, AD/CVD Operations, Office
III, Enforcement and Compliance, International Trade Administration,
U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington,
DC 20230; telephone: (202) 482-3855.
SUPPLEMENTARY INFORMATION:
Background
On February 5, 2019, Commerce initiated sunset reviews of the CVD
orders \1\ on hot-rolled steel from India and Indonesia, pursuant to
section 751(c) of the Tariff Act of 1930, as amended (the Act).\2\ On
February 20, 2019, Nucor Corporation, AK Steel Corporation,
ArcelorMittal USA LLC, United States Steel Corporation, California
Steel Industries, SSAB Enterprises LLC, and Steel Dynamics, Inc.
(collectively, domestic interested parties) filed timely notices of
intent to participate, in accordance with 19 CFR 351.218(d)(1).\3\ The
domestic interested parties claimed interested party status under
section 771(9)(C) of the Act.
---------------------------------------------------------------------------
\1\ See Notice of Amended Final Determination and Notice of
Countervailing Duty Orders: Certain Hot-Rolled Carbon Steel Flat
Products from India and Indonesia, 66 FR 60198 (December 3, 2001)
(Orders).
\2\ See Initiation of Five-Year (``Sunset'') Reviews, 77 FR 1705
(February 5, 2019) (Initiation Notice).
\3\ See domestic interested parties' letter, ``Certain Hot-
Rolled Carbon Steel Flat Products from India: Notice of Intent to
Participate,'' dated February 20, 2019.
---------------------------------------------------------------------------
On March 7, 2019, Commerce received adequate substantive responses
from the domestic interested parties within the 30-day deadline
specified in 19 CFR 351.218(d)(3)(i).\4\ However, Commerce did not
receive a substantive response from any government or respondent
interested party with respect to the orders covered by these sunset
reviews. As a result, pursuant to section 751(c)(3)(B) of the Act and
19 CFR 351.218(e)(1)(ii)(C)(2), Commerce has conducted expedited (120-
day) sunset reviews of the Orders.
---------------------------------------------------------------------------
\4\ See domestic interested parties' letter, ``Certain Hot-
Rolled Carbon Steel Flat Products from India: Substantive Response
to Notice of Initiation,'' dated March 7, 2019 (Substantive
Response).
---------------------------------------------------------------------------
Scope of the Orders
The merchandise subject to these orders is hot-rolled steel of a
rectangular shape, with a width of 0.5 inch or greater, neither clad,
plated, nor coated with metal and whether or not painted, varnished, or
coated with plastics or other non-metallic substances, in coils
(whether or not in successively superimposed layers), regardless of
thickness, and in straight lengths, of a thickness of less than 4.75 mm
and of a width measuring at least 10 times the thickness. Universal
mill plate (i.e., flat-rolled products rolled on four faces or in a
closed box pass, of a width exceeding 150 mm, but not exceeding 1,250
mm, and of a thickness of not less than 4 mm, not in coils and without
patterns in relief) of a thickness not less than 4.0 mm is not included
within the scope of these orders.
Specifically included within the scope of these orders are vacuum
degassed, fully stabilized (commonly referred to as interstitial-free
(IF)) steels, high strength low alloy (HSLA) steels, and the substrate
for motor lamination steels. IF steels are recognized as low carbon
steels with micro-alloying levels of elements such as titanium or
niobium (also commonly referred to as columbium), or both, added to
stabilize carbon and nitrogen elements. HSLA steels are recognized as
steels with micro-alloying levels of elements such as chromium, copper,
niobium, vanadium, and molybdenum. The substrate for motor lamination
steels contains micro-alloying levels of elements such as silicon and
aluminum.
Steel products included in the scope of the orders, regardless of
definitions in the Harmonized Tariff Schedule of the United States
(HTSUS), are products in which: (i) Iron predominates, by weight, over
each of the other contained elements; (ii) the carbon content is 2
percent or less, by weight; and (iii) none of the elements listed below
exceeds the quantity, by weight, respectively indicated:
1.80 percent of manganese, or
2.25 percent of silicon, or
1.00 percent of copper, or
0.50 percent of aluminum, or
1.25 percent of chromium, or
0.30 percent of cobalt, or
0.40 percent of lead, or
1.25 percent of nickel, or
0.30 percent of tungsten, or
0.10 percent of molybdenum, or
0.10 percent of niobium, or
0.15 percent of vanadium, or
0.15 percent of zirconium.
All products that meet the physical and chemical descriptions
provided above are within the scope of the orders unless otherwise
excluded. The following products, by way of example, are outside or
specifically excluded from the scope of the orders:
Alloy hot-rolled steel products in which at least one of
the chemical elements exceeds those listed above (including, 3,
American Society for Testing and Materials (ASTM) specifications A543,
A387, A514, A517, A506).
Society of Automotive Engineers (SAE)/American Iron &
Steel Institute (AISI) grades of series 2300 and higher.
Ball bearings steels, as defined in the HTSUS.
Tool steels, as defined in the HTSUS.
Silico-manganese (as defined in the HTSUS) or silicon
electrical steel with a silicon level exceeding 2.25 percent.
ASTM specifications A710 and A736.
USS Abrasion-resistant steels (USS AR 400, USS AR 500).
All products (proprietary or otherwise) based on an alloy
ASTM specification (sample specifications: ASTM A506, A507).
Non-rectangular shapes, not in coils, which are the result
of having been processed by cutting or stamping and which have assumed
the character of articles or products classified outside chapter 72 of
the HTSUS.
The merchandise subject to the orders is classified in the HTSUS at
subheadings: 7208.10.15.00, 7208.10.30.00, 7208.10.60.00,
7208.25.30.00, 7208.25.60.00, 7208.26.00.30, 7208.26.00.60,
7208.27.00.30, 7208.27.00.60, 7208.36.00.30, 7208.36.00.60,
7208.37.00.30, 7208.37.00.60, 7208.38.00.15, 7208.38.00.30,
7208.38.00.90, 7208.39.00.15, 7208.39.00.30, 7208.39.00.90,
7208.40.60.30, 7208.40.60.60, 7208.53.00.00, 7208.54.00.00,
7208.90.00.00, 7211.14.00.90, 7211.19.15.00, 7211.19.20.00,
7211.19.30.00, 7211.19.45.00, 7211.19.60.00, 7211.19.75.30,
7211.19.75.60, and 7211.19.75.90.
[[Page 27243]]
Certain hot-rolled carbon steel flat products covered by the
orders, including vacuum degassed fully stabilized, high strength low
alloy, and the substrate for motor lamination steel, may also enter
under the following tariff numbers: 7225.11.00.00, 7225.19.00.00,
7225.30.30.50, 7225.30.70.00, 7225.40.70.00, 7225.99.00.90,
7226.11.10.00, 7226.11.90.30, 7226.11.90.60, 7226.19.10.00,
7226.19.90.00, 7226.91.50.00, 7226.91.70.00, 7226.91.80.00, and
7226.99.00.00. Subject merchandise may also enter under 7210.70.30.00,
7210.90.90.00, 7211.14.00.30, 7212.40.10.00, 7212.40.50.00, and
7212.50.00.00. Although the HTSUS numbers are provided for convenience
and customs purposes, the written product description remains
dispositive.
Analysis of Comments Received
All issues raised in these reviews are addressed in the Issues and
Decision Memorandum.\5\ A list of the topics discussed in the Issues
and Decision Memorandum is attached to this notice as an Appendix. The
Issues and Decision Memorandum is a public document and is on file
electronically via Enforcement and Compliance's Antidumping and
Countervailing Duty Centralized Electronic Service System (ACCESS).
ACCESS is available to registered users at https://access.trade.gov and
is available to all parties in the Central Records Unit, Room B8024 of
the main Department of Commerce building. In addition, a complete
version of the Issues and Decision Memorandum can be accessed directly
at https://enforcement.trade.gov/frn/. The signed and electronic
versions of the Issues and Decision Memorandum are identical in
content.
---------------------------------------------------------------------------
\5\ See memorandum, ``Final Results of Expedited Third Sunset
Reviews of the Countervailing Duty Orders on Certain Hot-Rolled
Carbon Steel Flat Products from India and Indonesia,'' dated
concurrently with, and hereby adopted by, this notice (Issues and
Decision Memorandum).
---------------------------------------------------------------------------
Final Results of Reviews
Commerce determines that revocation of the Orders would be likely
to lead to continuation or recurrence of a countervailable subsidy at
the rates listed below: \6\
---------------------------------------------------------------------------
\6\ See Certain Hot-Rolled Carbon Steel Flat Products from
India: Implementation of Determinations Under Section 129 of the
Uruguay Round Agreements Act, 81 FR 27412 (May 6, 2016).
------------------------------------------------------------------------
Net
countervailable
Producers/exporters subsidy rate
(percent)
------------------------------------------------------------------------
India:
Essar Steel Limited.................................. 336.62
Ispat Industries Limited............................. 360.23
Steel Authority of India............................. 346.61
Tata Iron and Steel Company Limited.................. 337.51
All other producers/manufacturers/exporters.......... 344.44
Indonesia:
P.T. Krakatau Steel.................................. 10.21
All Others........................................... 10.21
------------------------------------------------------------------------
Notification Regarding Administrative Protective Order
This notice serves as the only reminder to parties subject to
administrative protective order (APO) of their responsibility
concerning the return or destruction of proprietary information
disclosed under APO in accordance with 19 CFR 351.305. Timely
notification of return/destruction of APO materials or conversion to
judicial protective order is hereby requested. Failure to comply with
the regulations and the terms of an APO is a sanctionable violation.
We are issuing and publishing the results and notice in accordance
with sections 75l(c), 752, and 777(i)(1) of the Act.
Dated: June 5, 2019.
Jeffrey I. Kessler,
Assistant Secretary for Enforcement and Compliance.
Appendix--List of Topics Discussed in the Issues and Decision
Memorandum
I. Summary
II. Background
III. History of the Orders
IV. Discussion of the Issues
1. Likelihood of Continuation or Recurrence of a Countervailable
Subsidy
2. Net Countervailable Subsidy Likely To Prevail
3. Nature of the Subsidy
V. Final Results of Reviews
VI. Recommendation
[FR Doc. 2019-12405 Filed 6-11-19; 8:45 am]
BILLING CODE 3510-DS-P
