Intertek Testing Services NA, Inc.: Application for Expansion of Recognition, 1792-1794 [2019-01030]
Download as PDF
1792
Federal Register / Vol. 84, No. 24 / Tuesday, February 5, 2019 / Notices
example, by using automated or other
technological information collection
and transmission techniques.
III. Proposed Actions
OSHA is proposing to adjust the
information collection burden hour
requirements contained in the agency’s
Strategic Partnership Program for
Worker Safety and Health (5 CFR
1320.5). The agency is requesting an
adjustment decrease in the number of
burden hours from 67,518 to 14,014
hours for a total decrease of 53,504
hours. The reduction is the result of a
decrease in the number of employers
and participants.
The agency will summarize the
comments submitted in response to this
notice and will include this summary in
the request to OMB.
Type of Review: Extension of a
currently approved collection.
Title: OSHA Strategic Partnership
Program (OSPP) for Worker Safety and
Health.
OMB Control Number: 1218–0244.
Affected Public: Businesses or other
for-profits.
Number of Respondents: 49.
Total Number of Responses: 2,236.
Frequency of Responses: On occasion.
Average Time Various.
Estimated Total Burden Hours:
14,014.
Estimated Cost (Operation and
Maintenance): $0.
IV. Public Participation—Submission of
Comments on This Notice and Internet
Access to Comments and Submissions
You may submit comments in
response to this document as follows:
(1) Electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal; (2) by
facsimile (fax); or (3) by hard copy. All
comments, attachments, and other
material must identify the agency name
and the OSHA docket number for this
ICR (Docket No. OSHA–2011–0861).
You may supplement electronic
submissions by uploading document
files electronically. If you wish to mail
additional materials in reference to an
electronic or a facsimile submission,
you must submit them to the OSHA
Docket Office (see the section of this
notice titled ADDRESSES). The additional
materials must clearly identify
electronic comments by your name,
date, and the docket number so the
agency can attach them to your
comments.
Because of security procedures, the
use of regular mail may cause a
significant delay in the receipt of
comments. For information about
security procedures concerning the
VerDate Sep<11>2014
17:22 Feb 04, 2019
Jkt 247001
delivery of materials by hand, express
delivery, messenger or courier service,
please contact the OSHA Docket Office
at (202) 693–2350, (TTY (877) 889–
5627)).
Comments and submissions are
posted without change at https://
www.regulations.gov. Therefore, OSHA
cautions commenters about submitting
personal information, such as their
social security number and date of birth.
Although all submissions are listed in
the https://www.regulations.gov index,
some information (e.g., copyrighted
material) is not publicly available to
read or download from this website. All
submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
Information on using the https://
www.regulations.gov website to submit
comments and access the docket is
available at the website’s ‘‘User Tips’’
link.
Contact the OSHA Docket Office for
information about materials not
available from the website and for
assistance in using the internet to locate
docket submissions.
V. Authority and Signature
Loren Sweatt, Deputy Assistant
Secretary of Labor for Occupational
Safety and Health, directed the
preparation of this notice. The authority
for this notice is the Paperwork
Reduction Act of 1995 (44 U.S.C. 3506
et seq.) and Secretary of Labor’s Order
No. 1–2012 (77 FR 3912).
Signed at Washington, DC, on January 30,
2019.
Loren Sweatt,
Deputy Assistant Secretary of Labor for
Occupational Safety and Health.
[FR Doc. 2019–01037 Filed 2–4–19; 8:45 am]
BILLING CODE 4510–26–P
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2007–0039]
Intertek Testing Services NA, Inc.:
Application for Expansion of
Recognition
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Notice.
AGENCY:
In this notice, OSHA
announces the application of Intertek
Testing Services NA, Inc., for expansion
of recognition as a Nationally
Recognized Testing Laboratory (NRTL)
and presents the agency’s preliminary
finding to grant the application.
SUMMARY:
PO 00000
Frm 00095
Fmt 4703
Sfmt 4703
Submit comments, information,
and documents in response to this
notice, or requests for an extension of
time to make a submission, on or before
February 20, 2019.
ADDRESSES: Submit comments by any of
the following methods:
Electronically: You may submit
comments and attachments
electronically at: https://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for submitting
comments.
Facsimile: If your comments,
including attachments, are not longer
than 10 pages, you may fax them to the
OSHA Docket Office at (202) 693–1648.
Mail, hand delivery, express mail,
messenger, or courier service: When
using this method, you must submit a
copy of your comments and attachments
to the OSHA Docket Office, Docket No.
OSHA–2007–0039, Occupational Safety
and Health Administration, U.S.
Department of Labor, Room N–3653,
200 Constitution Avenue NW,
Washington, DC 20210. Deliveries
(hand, express mail, messenger, and
courier service) are accepted during the
Docket Office’s normal business hours,
10:00 a.m. to 3:00 p.m., ET.
Instructions: All submissions must
include the agency name and the OSHA
docket number (OSHA–2007–0039).
OSHA places comments and other
materials, including any personal
information, in the public docket
without revision, and these materials
will be available online at https://
www.regulations.gov. For further
information on submitting comments,
see the ‘‘Public Participation’’ heading
in the section of this notice titled
SUPPLEMENTARY INFORMATION:
Docket: To read or download
comments or other material in the
docket, go to https://
www.regulations.gov or the OSHA
Docket Office at the above address. All
documents in the docket (including this
Federal Register notice) are listed in the
https://www.regulations.gov index;
however, some information (e.g.,
copyrighted material) is not publicly
available to read or download through
the website. All submissions, including
copyrighted material, are available for
inspection at the OSHA Docket Office.
Extension of comment period: Submit
requests for an extension of the
comment period on or before February
20, 2019 to the Office of Technical
Programs and Coordination Activities,
Directorate of Technical Support and
Emergency Management, Occupational
Safety and Health Administration, U.S.
Department of Labor, 200 Constitution
DATES:
E:\FR\FM\05FEN1.SGM
05FEN1
Federal Register / Vol. 84, No. 24 / Tuesday, February 5, 2019 / Notices
Avenue NW, Room N–3653,
Washington, DC 20210, or by fax to
(202) 693–1644.
FOR FURTHER INFORMATION CONTACT:
Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank
Meilinger, Director, OSHA Office of
Communications, U.S. Department of
Labor, telephone: (202) 693–1999;
email: meilinger.francis2@dol.gov.
General and technical information:
Contact Mr. Kevin Robinson, Director,
Office of Technical Programs and
Coordination Activities, Directorate of
Technical Support and Emergency
Management, Occupational Safety and
Health Administration, U.S. Department
of Labor, phone: (202) 693–2110 or
email: robinson.kevin@dol.gov.
SUPPLEMENTARY INFORMATION:
I. Notice of the Application for
Expansion
OSHA is providing notice that
Intertek Testing Services NA, Inc.
(ITSNA), is applying for expansion of
recognition as a NRTL. ITSNA requests
the addition of three test standards to
the NRTL scope of recognition.
OSHA recognition of a NRTL signifies
that the organization meets the
requirements specified in 29 CFR
1910.7. Recognition is an
acknowledgment that the organization
can perform independent safety testing
and certification of the specific products
covered within the scope of recognition.
Each NRTL’s scope of recognition
includes (1) the type of products the
NRTL may test, with each type specified
by its applicable test standard; and (2)
the recognized site(s) that has/have the
technical capability to perform the
product-testing and productcertification activities for test standards
within the NRTL’s scope. Recognition is
not a delegation or grant of government
authority; however, recognition enables
employers to use products approved by
the NRTL to meet OSHA standards that
require product testing and certification.
The agency processes applications by
a NRTL for initial recognition and for an
expansion or renewal of this
recognition, following requirements in
Appendix A to 29 CFR 1910.7. This
appendix requires that the agency
publish two notices in the Federal
Register in processing an application. In
the first notice, OSHA announces the
application and provides a preliminary
finding. In the second notice, the agency
provides the final decision on the
application. These notices set forth the
NRTL’s scope of recognition or
modifications of that scope. OSHA
maintains an informational web page for
1793
each NRTL, including ITSNA, which
details the NRTL’s scope of recognition.
These pages are available from the
OSHA website at https://www.osha.gov/
dts/otpca/nrtl/.
ITSNA currently has fourteen
facilities (sites) recognized by OSHA for
product testing and certification, with
its headquarters located at: Intertek
Testing Services NA, Inc., 545 East
Algonquin Road, Suite F, Arlington
Heights, IL 60005. A complete list of
ITSNA’s scope of recognition is
available at https://www.osha.gov/dts/
otpca/nrtl/its.html.
II. General Background on the
Application
ITSNA submitted an application,
dated July 12, 2018 (OSHA–2007–0039–
0029), to expand recognition to include
three additional test standards. OSHA
staff performed a detailed analysis of the
application packet and reviewed other
pertinent information. OSHA did not
perform any on-site reviews in relation
to this application.
Table 1 lists the appropriate test
standards found in ITSNA’s application
for expansion for testing and
certification of products under the
NRTL Program.
TABLE 1—PROPOSED LIST OF APPROPRIATE TEST STANDARDS FOR INCLUSION IN ITSNA’S NRTL SCOPE OF
RECOGNITION
Test standard
Test standard title
UL 1990 ..........................................
UL 60745–2–19 ..............................
UL 60745–2–22 ..............................
Standard for Nonmetallic Underground Conduit with Conductors.
Hand-Held Motor-Operated Electric Tools—Safety—Part 2–19: Particular Requirements For Jointers.
Hand-Held Motor-Operated Electric Tools—Safety—Part 2–22: Particular Requirements For Cut-Off Machines.
III. Preliminary Findings on the
Application
ITSNA submitted an acceptable
application for expansion of the scope
of recognition. OSHA’s review of the
application file, and pertinent
documentation, indicate that ITSNA can
meet the requirements prescribed by 29
CFR 1910.7 for expanding recognition to
include the addition of these three test
standards for NRTL testing and
certification listed in Table 1. This
preliminary finding does not constitute
an interim or temporary approval of
ITSNA’s application.
OSHA welcomes public comment as
to whether ITSNA meets the
requirements of 29 CFR 1910.7 for
expansion of recognition as a NRTL.
Comments should consist of pertinent
written documents and exhibits.
Commenters needing more time to
comment must submit a request in
VerDate Sep<11>2014
17:22 Feb 04, 2019
Jkt 247001
writing, stating the reasons for the
request. Commenters must submit the
written request for an extension by the
due date for comments. OSHA will limit
any extension to 10 days unless the
requester justifies a longer period.
OSHA may deny a request for an
extension if the request is not
adequately justified. To obtain or review
copies of the exhibits identified in this
notice, as well as comments submitted
to the docket, contact the Docket Office,
Room N–3653, Occupational Safety and
Health Administration, U.S. Department
of Labor, at the above address. These
materials also are available online at
https://www.regulations.gov under
Docket No. OSHA–2007–0039.
OSHA staff will review all comments
to the docket submitted in a timely
manner. After addressing the issues
raised by these comments, the agency
will make a recommendation to the
PO 00000
Frm 00096
Fmt 4703
Sfmt 4703
Assistant Secretary for Occupational
Safety and Health whether to grant
ITSNA’s application for expansion of its
scope of recognition. The Assistant
Secretary will make the final decision
on granting the application. In making
this decision, the Assistant Secretary
may undertake other proceedings
prescribed in Appendix A to 29 CFR
1910.7.
OSHA will publish a public notice of
its final decision in the Federal
Register.
IV. Authority and Signature
Loren Sweatt, Deputy Assistant
Secretary of Labor for Occupational
Safety and Health, authorized the
preparation of this notice. Accordingly,
the agency is issuing this notice
pursuant to 29 U.S.C. 657(g)(2),
Secretary of Labor’s Order No. 1–2012
E:\FR\FM\05FEN1.SGM
05FEN1
1794
Federal Register / Vol. 84, No. 24 / Tuesday, February 5, 2019 / Notices
(77 FR 3912, Jan. 25, 2012), and 29 CFR
1910.7.
Signed at Washington, DC, on January 30,
2019.
Loren Sweatt,
Deputy Assistant Secretary of Labor for
Occupational Safety and Health.
[FR Doc. 2019–01030 Filed 2–4–19; 8:45 am]
BILLING CODE 4510–26–P
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2012–0016]
Marine Terminals and Longshoring
Standards; Extension of the Office of
Management and Budget’s (OMB)
Approval of Information Collection
(Paperwork) Requirements
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comments.
AGENCY:
OSHA solicits public
comments concerning the proposal to
extend the Office of Management and
Budget’s (OMB) approval of the
information collection requirements
contained in the standards on Marine
Terminals and Longshoring.
DATES: Comments must be submitted
(postmarked, sent, or received) by April
8, 2019.
ADDRESSES:
Electronically: You may submit
comments and attachments
electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for submitting
comments.
Facsimile: If your comments,
including attachments, are not longer
than 10 pages, you may fax them to the
OSHA Docket Office at (202) 693–1648.
Mail, hand delivery, express mail,
messenger, or courier service: When
using this method, you must submit
your comments and attachments to the
OSHA Docket Office, Docket No.
OSHA–2012–0016, U.S. Department of
Labor, Occupational Safety and Health
Administration, Room N–3653, 200
Constitution Avenue NW, Washington,
DC 20210. Deliveries (hand, express
mail, messenger, and courier service)
are accepted during the Docket Office’s
normal business hours, 10:00 a.m. to
3:00 p.m., ET.
Instructions: All submissions must
include the agency name and OSHA
docket number (OSHA–2012–0016) for
the Information Collection Request
(ICR). All comments, including any
SUMMARY:
VerDate Sep<11>2014
17:22 Feb 04, 2019
Jkt 247001
personal information you provide, are
placed in the public docket without
change, and may be made available
online at https://www.regulations.gov.
For further information on submitting
comments, see the ‘‘Public
Participation’’ heading in the section of
this notice titled SUPPLEMENTARY
INFORMATION.
Docket: To read or download
comments or other material in the
docket, go to https://www.regulations.gov
or the OSHA Docket Office at the above
address. All documents in the docket
(including this Federal Register notice)
are listed in the https://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download through the website.
All submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
You may also contact Theda Kenney at
the phone number below to obtain a
copy of the ICR.
FOR FURTHER INFORMATION CONTACT:
Seleda Perryman, Directorate of
Standards and Guidance, OSHA, U.S.
Department of Labor, telephone (202)
693–2222.
SUPPLEMENTARY INFORMATION:
collections of information which are
used by employers to ensure that
employees are properly informed about
the safety and health hazards associated
with marine terminals and longshoring
operations. OSHA uses the records
developed in response to the collection
of information requirements to find out
if the employer is complying adequately
with the provisions of the standards.
I. Background
OSHA is requesting that OMB extend
approval of the information collection
requirements contained in the standards
on Marine Terminals (29 CFR part 1917)
and Longshoring (29 CFR part 1918).
The agency is requesting a decrease in
the current burden hour estimate from
65,694 hours to 58,033, a difference of
7,661 hours. The adjustment in burden
is due to an increase in the number of
longshoring operations from 871 to 916
establishments, and a reduction in the
number of establishments in port and
harbor operations from 525 to 332
establishments. The Agency will
summarize any comments submitted in
response to this notice and will include
this summary in the request to OMB.
Type of Review: Extension of
currently approved collections.
Title: Marine Terminals (29 CFR part
1917) and Longshoring (29 CFR part
1918).
OMB Number: 1218–0196.
Affected Public: Business or other forprofits; Not-for-profit organizations;
Federal Government; State, Local, or
Tribal Government.
Number of Respondents: 1,248.
Frequency of Response: On occasion.
Average Time per Response: Varies
from one minute (.02 hour) to 50 hours.
Estimated Total Burden Hours:
58,033.
Estimated Cost (Operation and
Maintenance): $0.
The Department of Labor, as part of a
continuing effort to reduce paperwork
and respondent (i.e., employer) burden,
conducts a preclearance consultation
program to provide the public with an
opportunity to comment on proposed
and continuing information collection
requirements in accordance with the
Paperwork Reduction Act of 1995 (44
U.S.C. 3506(c)(2)(A)). This program
ensures that information is in the
desired format, reporting burden (time
and costs) is minimal, collection
instruments are clearly understood, and
OSHA’s estimate of the information
collection burden is accurate. The
Occupational Safety and Health Act of
1970 (the OSH Act) (29 U.S.C. 651 et
seq.) authorizes information collection
by employers as necessary or
appropriate for enforcement of the OSH
Act or for developing information
regarding the causes and prevention of
occupational injuries, illnesses, and
accidents (29 U.S.C. 657). The OSH Act
also requires that OSHA obtain such
information with minimum burden
upon employers, especially those
operating small businesses, and to
reduce to the maximum extent feasible
unnecessary duplication of efforts in
obtaining information (29 U.S.C. 657).
The standards on Marine Terminals
and Longshoring contain a number of
PO 00000
Frm 00097
Fmt 4703
Sfmt 4703
II. Special Issues for Comment
OSHA has a particular interest in
comments on the following issues:
• Whether the proposed information
collection requirements are necessary
for the proper performance of the
agency’s functions, including whether
the information is useful;
• The accuracy of OSHA’s estimate of
the burden (time and costs) of the
information collection requirements,
including the validity of the
methodology and assumptions used;
• The quality, utility, and clarity of
the information collected; and
• Ways to minimize the burden on
employers who must comply; for
example, by using automated or other
technological information collection
and transmission techniques.
III. Proposed Actions
E:\FR\FM\05FEN1.SGM
05FEN1
Agencies
[Federal Register Volume 84, Number 24 (Tuesday, February 5, 2019)]
[Notices]
[Pages 1792-1794]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-01030]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2007-0039]
Intertek Testing Services NA, Inc.: Application for Expansion of
Recognition
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: In this notice, OSHA announces the application of Intertek
Testing Services NA, Inc., for expansion of recognition as a Nationally
Recognized Testing Laboratory (NRTL) and presents the agency's
preliminary finding to grant the application.
DATES: Submit comments, information, and documents in response to this
notice, or requests for an extension of time to make a submission, on
or before February 20, 2019.
ADDRESSES: Submit comments by any of the following methods:
Electronically: You may submit comments and attachments
electronically at: https://www.regulations.gov, which is the Federal
eRulemaking Portal. Follow the instructions online for submitting
comments.
Facsimile: If your comments, including attachments, are not longer
than 10 pages, you may fax them to the OSHA Docket Office at (202) 693-
1648.
Mail, hand delivery, express mail, messenger, or courier service:
When using this method, you must submit a copy of your comments and
attachments to the OSHA Docket Office, Docket No. OSHA-2007-0039,
Occupational Safety and Health Administration, U.S. Department of
Labor, Room N-3653, 200 Constitution Avenue NW, Washington, DC 20210.
Deliveries (hand, express mail, messenger, and courier service) are
accepted during the Docket Office's normal business hours, 10:00 a.m.
to 3:00 p.m., ET.
Instructions: All submissions must include the agency name and the
OSHA docket number (OSHA-2007-0039). OSHA places comments and other
materials, including any personal information, in the public docket
without revision, and these materials will be available online at
https://www.regulations.gov. For further information on submitting
comments, see the ``Public Participation'' heading in the section of
this notice titled SUPPLEMENTARY INFORMATION:
Docket: To read or download comments or other material in the
docket, go to https://www.regulations.gov or the OSHA Docket Office at
the above address. All documents in the docket (including this Federal
Register notice) are listed in the https://www.regulations.gov index;
however, some information (e.g., copyrighted material) is not publicly
available to read or download through the website. All submissions,
including copyrighted material, are available for inspection at the
OSHA Docket Office.
Extension of comment period: Submit requests for an extension of
the comment period on or before February 20, 2019 to the Office of
Technical Programs and Coordination Activities, Directorate of
Technical Support and Emergency Management, Occupational Safety and
Health Administration, U.S. Department of Labor, 200 Constitution
[[Page 1793]]
Avenue NW, Room N-3653, Washington, DC 20210, or by fax to (202) 693-
1644.
FOR FURTHER INFORMATION CONTACT: Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office
of Communications, U.S. Department of Labor, telephone: (202) 693-1999;
email: meilinger.francis2@dol.gov.
General and technical information: Contact Mr. Kevin Robinson,
Director, Office of Technical Programs and Coordination Activities,
Directorate of Technical Support and Emergency Management, Occupational
Safety and Health Administration, U.S. Department of Labor, phone:
(202) 693-2110 or email: robinson.kevin@dol.gov.
SUPPLEMENTARY INFORMATION:
I. Notice of the Application for Expansion
OSHA is providing notice that Intertek Testing Services NA, Inc.
(ITSNA), is applying for expansion of recognition as a NRTL. ITSNA
requests the addition of three test standards to the NRTL scope of
recognition.
OSHA recognition of a NRTL signifies that the organization meets
the requirements specified in 29 CFR 1910.7. Recognition is an
acknowledgment that the organization can perform independent safety
testing and certification of the specific products covered within the
scope of recognition. Each NRTL's scope of recognition includes (1) the
type of products the NRTL may test, with each type specified by its
applicable test standard; and (2) the recognized site(s) that has/have
the technical capability to perform the product-testing and product-
certification activities for test standards within the NRTL's scope.
Recognition is not a delegation or grant of government authority;
however, recognition enables employers to use products approved by the
NRTL to meet OSHA standards that require product testing and
certification.
The agency processes applications by a NRTL for initial recognition
and for an expansion or renewal of this recognition, following
requirements in Appendix A to 29 CFR 1910.7. This appendix requires
that the agency publish two notices in the Federal Register in
processing an application. In the first notice, OSHA announces the
application and provides a preliminary finding. In the second notice,
the agency provides the final decision on the application. These
notices set forth the NRTL's scope of recognition or modifications of
that scope. OSHA maintains an informational web page for each NRTL,
including ITSNA, which details the NRTL's scope of recognition. These
pages are available from the OSHA website at https://www.osha.gov/dts/otpca/nrtl/.
ITSNA currently has fourteen facilities (sites) recognized by OSHA
for product testing and certification, with its headquarters located
at: Intertek Testing Services NA, Inc., 545 East Algonquin Road, Suite
F, Arlington Heights, IL 60005. A complete list of ITSNA's scope of
recognition is available at https://www.osha.gov/dts/otpca/nrtl/its.html.
II. General Background on the Application
ITSNA submitted an application, dated July 12, 2018 (OSHA-2007-
0039-0029), to expand recognition to include three additional test
standards. OSHA staff performed a detailed analysis of the application
packet and reviewed other pertinent information. OSHA did not perform
any on-site reviews in relation to this application.
Table 1 lists the appropriate test standards found in ITSNA's
application for expansion for testing and certification of products
under the NRTL Program.
Table 1--Proposed List of Appropriate Test Standards for Inclusion in
ITSNA's NRTL Scope of Recognition
------------------------------------------------------------------------
Test standard Test standard title
------------------------------------------------------------------------
UL 1990........................... Standard for Nonmetallic Underground
Conduit with Conductors.
UL 60745-2-19..................... Hand-Held Motor-Operated Electric
Tools--Safety--Part 2-19:
Particular Requirements For
Jointers.
UL 60745-2-22..................... Hand-Held Motor-Operated Electric
Tools--Safety--Part 2-22:
Particular Requirements For Cut-Off
Machines.
------------------------------------------------------------------------
III. Preliminary Findings on the Application
ITSNA submitted an acceptable application for expansion of the
scope of recognition. OSHA's review of the application file, and
pertinent documentation, indicate that ITSNA can meet the requirements
prescribed by 29 CFR 1910.7 for expanding recognition to include the
addition of these three test standards for NRTL testing and
certification listed in Table 1. This preliminary finding does not
constitute an interim or temporary approval of ITSNA's application.
OSHA welcomes public comment as to whether ITSNA meets the
requirements of 29 CFR 1910.7 for expansion of recognition as a NRTL.
Comments should consist of pertinent written documents and exhibits.
Commenters needing more time to comment must submit a request in
writing, stating the reasons for the request. Commenters must submit
the written request for an extension by the due date for comments. OSHA
will limit any extension to 10 days unless the requester justifies a
longer period. OSHA may deny a request for an extension if the request
is not adequately justified. To obtain or review copies of the exhibits
identified in this notice, as well as comments submitted to the docket,
contact the Docket Office, Room N-3653, Occupational Safety and Health
Administration, U.S. Department of Labor, at the above address. These
materials also are available online at https://www.regulations.gov under
Docket No. OSHA-2007-0039.
OSHA staff will review all comments to the docket submitted in a
timely manner. After addressing the issues raised by these comments,
the agency will make a recommendation to the Assistant Secretary for
Occupational Safety and Health whether to grant ITSNA's application for
expansion of its scope of recognition. The Assistant Secretary will
make the final decision on granting the application. In making this
decision, the Assistant Secretary may undertake other proceedings
prescribed in Appendix A to 29 CFR 1910.7.
OSHA will publish a public notice of its final decision in the
Federal Register.
IV. Authority and Signature
Loren Sweatt, Deputy Assistant Secretary of Labor for Occupational
Safety and Health, authorized the preparation of this notice.
Accordingly, the agency is issuing this notice pursuant to 29 U.S.C.
657(g)(2), Secretary of Labor's Order No. 1-2012
[[Page 1794]]
(77 FR 3912, Jan. 25, 2012), and 29 CFR 1910.7.
Signed at Washington, DC, on January 30, 2019.
Loren Sweatt,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2019-01030 Filed 2-4-19; 8:45 am]
BILLING CODE 4510-26-P