Certain Steel Wheels From the People's Republic of China: Preliminary Determination of Sales at Less-Than-Fair-Value, 54568-54570 [2018-23661]
Download as PDF
54568
Federal Register / Vol. 83, No. 210 / Tuesday, October 30, 2018 / Notices
Producer/exporter
khammond on DSK30JT082PROD with NOTICES
Jiangsu High Hope Int’l
Group ................................
Jiawei Solarchina Co., Ltd. ...
Jiawei Solarchina
(Shenzhen) Co., Ltd. .........
JingAo Solar Co., Ltd. ..........
Jinko Solar Co., Ltd. .............
Jinko Solar Import and Export Co., Ltd. .....................
Jinko Solar International Limited ....................................
Jinko Solar (U.S.) Inc. ..........
Lightway Green New Energy
Co., Ltd. ............................
Lixian Yingli New Energy Resources Co., Ltd. ...............
Luoyang Suntech Power Co.,
Ltd. ....................................
Ningbo Qixin Solar Electrical
Appliance Co., Ltd. ...........
Risen Energy Co., Ltd. .........
Shanghai JA Solar Technology Co., Ltd. .................
Shenzhen Glory Industries
Co., Ltd. ............................
Shenzhen Topray Solar Co.,
Ltd. ....................................
Sumec Hardware & Tools
Co. Ltd. .............................
Systemes Versilis, Inc. .........
Taizhou BD Trade Co., Ltd.
tenKsolar (Shanghai) Co.,
Ltd. ....................................
Tianjin Yingli New Energy
Resources Co., Ltd. ..........
Toenergy Technology
Hangzhou Co., Ltd. ...........
Wuxi Suntech Power Co.,
Ltd. ....................................
Yingli Energy (China) Co.,
Ltd. ....................................
Zhejiang Era Solar Technology Co., Ltd. .................
Zhejiang Jinko Solar Co.,
Ltd. ....................................
Zhejiang Sunflower Light Energy Science & Technology Limited Liability
Company ...........................
instruct CBP to assess countervailing
duties on those enjoined entries
pending resolution of the associated
litigation.
10.64
Commerce intends to instruct CBP to
10.64 collect cash deposits of estimated
countervailing duties, in the amounts
10.64
shown above for the companies listed
10.64
10.64 above, on shipments of subject
merchandise entered, or withdrawn
10.64 from warehouse, for consumption on or
after July 23, 2018, which is the date of
10.64 publication of the Final Results. For all
10.64
non-reviewed firms, we will instruct
10.64 CBP to collect cash deposits at the most
recent company-specific or all-others
10.64 rate applicable to the company, as
appropriate. These cash deposit
10.64 requirements, when imposed, shall
10.64 remain in effect until further notice.
Subsidy rate
(percent ad
valorem)
10.64
Administrative Protective Order
10.64
This notice also serves as a reminder
to parties that are subject to
administrative protective order (APO) of
10.64 their responsibility concerning the
return or destruction of proprietary
10.64 information disclosed under APO in
10.64 accordance with 19 CFR 351.305(a)(3),
10.64
which continues to govern business
10.64 proprietary information in this segment
of the proceeding. Timely written
10.64 notification of the return/destruction of
APO materials, or conversion to judicial
10.64 protective order, is hereby requested.
Failure to comply with the regulations
10.64
and the terms of an APO is a
10.64 sanctionable violation.
10.64
10.64
10.64
10.64
Assessment Rates/Cash Deposits
Normally, Commerce would issue
appropriate assessment instructions to
U.S. Customs and Border Protection
(CBP) 15 days after the date of
publication of these amended final
results of review, to liquidate shipments
of subject merchandise produced and/or
exported by the companies listed above
entered, or withdrawn from warehouse,
for consumption on or after January 1,
2015, through December 31, 2015.
However, on August 31, 2018, and on
September 20 and 24, 2018, the CIT
enjoined liquidation of certain entries
that are subject to the Final Results.9
Accordingly, Commerce will not
Disclosure
We intend to disclose the calculations
performed for these amended final
results to interested parties within five
business days of the date of publication
of this notice in accordance with 19 CFR
351.224(b).
We are issuing and publishing these
results in accordance with section
751(h) and 777(i)(1) of the Act, and 19
CFR 351.224(e).
Dated: October 25, 2018.
Gary Taverman,
Deputy Assistant Secretary for Antidumping
and Countervailing Duty Operations
performing the non-exclusive functions and
duties of the Assistant Secretary for
Enforcement and Compliance.
[FR Doc. 2018–23667 Filed 10–29–18; 8:45 am]
BILLING CODE 3510–DS–P
9 The CIT issued the statutory injunctions in case
numbers 18–00184, 18–00185, and 18–00186.
VerDate Sep<11>2014
17:34 Oct 29, 2018
Jkt 247001
PO 00000
Frm 00003
Fmt 4703
Sfmt 4703
DEPARTMENT OF COMMERCE
International Trade Administration
[A–570–082]
Certain Steel Wheels From the
People’s Republic of China:
Preliminary Determination of Sales at
Less-Than-Fair-Value
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce
(Commerce) preliminarily determines
that steel wheels from the People’s
Republic of China (China) are being, or
are likely to be, sold in the United States
at less-than-fair-value (LTFV) for the
period of investigation (POI) July 1,
2017, through December 31, 2017.
Interested parties are invited to
comment on this preliminary
determination.
DATES: Applicable October 30, 2018.
FOR FURTHER INFORMATION CONTACT:
Lingjun Wang, AD/CVD Operations,
Office VII, Enforcement and
Compliance, International Trade
Administration, U.S. Department of
Commerce, 1401 Constitution Avenue
NW, Washington, DC 20230; telephone:
(202) 482–2316.
SUPPLEMENTARY INFORMATION:
AGENCY:
Background
This preliminary determination is
made in accordance with section 733(b)
of the Tariff Act of 1930, as amended
(the Act). Commerce published the
notice of initiation of this investigation
on April 24, 2018.1 On August 20, 2018,
Commerce postponed the preliminary
determination of this investigation and
the revised deadline is now October 23,
2018.2 For a complete description of the
events that followed the initiation of
this investigation, see the Preliminary
Decision Memorandum.3 A list of topics
included in the Preliminary Decision
Memorandum is included as Appendix
II to this notice. The Preliminary
Decision Memorandum is a public
document and is on file electronically
via Enforcement and Compliance’s
Antidumping and Countervailing Duty
1 See Certain Steel Wheels from the People’s
Republic of China: Initiation of Less-Than-FairValue Investigation, 83 FR 17798 (April 24, 2018)
(Initiation Notice).
2 See Steel Wheels from the People’s Republic of
China: Postponement of Preliminary Determination
in the Less-Than-Fair-Value Investigation, 83 FR
42110 (August 20, 2018).
3 See Memorandum re: Decision Memorandum
for the Preliminary Determination in the Less-ThanFair-Value Investigation of Certain Steel Wheels
from the People’s Republic of China, dated
concurrently with, and hereby adopted by, this
notice (Preliminary Decision Memorandum).
E:\FR\FM\30OCN1.SGM
30OCN1
Federal Register / Vol. 83, No. 210 / Tuesday, October 30, 2018 / Notices
Centralized Electronic Service System
(ACCESS). ACCESS is available to
registered users at https://
access.trade.gov, and it is available to
all parties in the Central Records Unit,
room B8024 of the main building of
Commerce. In addition, a complete
version of the Preliminary Decision
Memorandum can be accessed directly
at https://enforcement.trade.gov/frn/.
The signed and the electronic versions
of the Preliminary Decision
Memorandum are identical in content.
Scope of the Investigation
The products covered by this
investigation are steel wheels from
China. For a complete description of the
scope of this investigation, see
Appendix I.
khammond on DSK30JT082PROD with NOTICES
Scope Comments
In accordance with the preamble to
Commerce’s regulations,4 the Initiation
Notice set aside a period of time for
parties to raise issues regarding product
coverage (i.e., scope).5 No interested
party commented on the scope of the
investigation as it appeared in the
Initiation Notice. Commerce is not
modifying the scope language as it
appeared in the Initiation Notice. See
the scope in Appendix I.
Methodology
Commerce is conducting this
investigation in accordance with section
731 of the Act. Pursuant to section
776(a) and (b) of the Act, we have
preliminarily relied upon facts
otherwise available, with adverse
inferences, for the China-wide entity
because it did not respond to our
requests for information. Specifically,
two mandatory respondents withdrew
their participation, and no other
companies have demonstrated their
54569
eligibility for a separate rate; thus, all
companies are preliminarily found to be
part of the China-wide entity.
Furthermore, we find that the Chinawide entity’s lack of participation,
including the failure of certain parts of
the China-wide entity to respond to
Commerce’s questionnaires, constitute
circumstances under which it is
reasonable to conclude that the Chinawide entity as a whole failed to
cooperate to the best of its ability to
comply with Commerce’s requests for
information. For a full description of the
methodology underlying Commerce’s
preliminary determination, see the
Preliminary Decision Memorandum.
Preliminary Determination
Commerce preliminarily determines
that the following estimated weightedaverage dumping margins exist:
Producer
Exporter
Estimated
weightedaverage
dumping
margin
(percent)
China-Wide Entity .......................................................................
China-Wide Entity .......................................................................
231.70
Suspension of Liquidation
In accordance with section 733(d)(2)
of the Act, Commerce will direct U.S.
Customs and Border Protection (CBP) to
suspend liquidation of subject
merchandise as described in the scope
of the investigation section entered, or
withdrawn from warehouse, for
consumption on or after the date of
publication of this notice in the Federal
Register, as discussed below. Further,
pursuant to section 733(d)(1)(B) of the
Act and 19 CFR 351.205(d), Commerce
will instruct CBP to require a cash
deposit equal to the amount by which
normal value exceeds U.S. price,
adjusted, as appropriate, for export
subsidies, as indicated in the chart
above.
To determine the cash deposit rate,
Commerce normally adjusts the
estimated weighted-average dumping
margin by the amount of domestic
subsidy pass-through and export
subsidies determined in a companion
CVD proceeding when CVD provisional
measures are in effect. Accordingly,
where Commerce has made a
preliminary affirmative determination
for domestic subsidy pass-through or
export subsidies, Commerce has offset
the calculated estimated weighted4 See Antidumping Duties; Countervailing Duties,
Final Rule, 62 FR 27296, 27323 (May 19, 1997).
VerDate Sep<11>2014
17:34 Oct 29, 2018
Jkt 247001
average dumping margin by the
appropriate rate(s). As discussed in the
Preliminary Decision Memorandum, we
have made no adjustment for domestic
subsidy pass-through. As further
explained in the Preliminary Decision
Memorandum, as an extension of our
AFA finding for the China-wide entity,
the appropriate export subsidy
adjustment is the lowest amount of
export subsidies found for any
respondent in the companion CVD
investigation, which is zero.
These suspension of liquidation
instructions will remain in effect until
further notice.
Disclosure
Normally, Commerce discloses to
interested parties the calculations
performed in connection with a
preliminary determination within five
days of its public announcement or, if
there is no public announcement,
within five days of the date of
publication of this notice in accordance
with 19 CFR 351.224(b). However,
because Commerce preliminarily
applied total AFA to companies in this
investigation in accordance with section
776 of the Act, and the applied AFA rate
5 See
PO 00000
Initiation Notice.
Frm 00004
Fmt 4703
is based solely on the petition, there are
no calculations to disclose.
Verification
Because the mandatory respondents
withdrew their participation, Commerce
preliminarily determines each of the
mandatory respondents to have been
uncooperative, and verification of
Sunrise and Jingu will not be
conducted.
Public Comment
Case briefs or other written comments
may be submitted to the Assistant
Secretary for Enforcement and
Compliance no later than 45 days after
the date of publication of the
preliminary determination, unless the
Secretary alters the time limit. Rebuttal
briefs, limited to issues raised in case
briefs, may be submitted no later than
five days after the deadline date for case
briefs.6 Pursuant to 19 CFR
351.309(c)(2) and (d)(2), parties who
submit case briefs or rebuttal briefs in
this investigation are encouraged to
submit with each argument: (1) A
statement of the issue; (2) a brief
summary of the argument; and (3) a
table of authorities.
6 See 19 CFR 351.309; see also 19 CFR 351.303
(for general filing requirements).
Sfmt 4703
E:\FR\FM\30OCN1.SGM
30OCN1
54570
Federal Register / Vol. 83, No. 210 / Tuesday, October 30, 2018 / Notices
Pursuant to 19 CFR 351.310(c),
interested parties who wish to request a
hearing, limited to issues raised in the
case and rebuttal briefs, must submit a
written request to the Assistant
Secretary for Enforcement and
Compliance, U.S. Department of
Commerce, within 30 days after the date
of publication of this notice. Requests
should contain the party’s name,
address, and telephone number, the
number of participants, whether any
participant is a foreign national, and a
list of the issues to be discussed. If a
request for a hearing is made, Commerce
intends to hold the hearing at the U.S.
Department of Commerce, 1401
Constitution Avenue NW, Washington,
DC 20230, at a time and date to be
determined. Parties should confirm the
date, time, and location of the hearing
two days before the scheduled date.
Final Determination
Section 735(a)(1) of the Act and 19
CFR 351.210(b)(1) provide that
Commerce will issue the final
determination within 75 days after the
date of its preliminary determination.
However, on August 15, 2018, pursuant
to section 735(a)(2) of the Act, Sunrise
requested that Commerce postpone the
final determination and extend
provisional measures from four months
to six months.7 In accordance with 19
CFR 351.210(e)(2), we are still
considering this request. Should we
determine to postpone the final
determination and extend provisional
measures, we will publish a notification
in the Federal Register.8
International Trade Commission
Notification
In accordance with section 733(f) of
the Act, Commerce will notify the
International Trade Commission (ITC) of
its preliminary determination of sales at
LTFV. If the final determination is
affirmative, the ITC will determine
before the later of 120 days after the date
of this preliminary determination or 45
days after the final determination
whether imports of the subject
merchandise are materially injuring, or
threaten material injury to, the U.S.
industry.
khammond on DSK30JT082PROD with NOTICES
Notification to Interested Parties
This determination is issued and
published in accordance with sections
733(f) and 777(i)(1) of the Act and 19
CFR 351.205(c).
7 See Sunrise’s August 15, 2018 Request to
Postpone Final Determination.
8 See 19 CFR 351.210(g).
VerDate Sep<11>2014
17:34 Oct 29, 2018
Jkt 247001
Dated: October 23, 2018.
Gary Taverman,
Deputy Assistant Secretary for Antidumping
and Countervailing Duty Operations,
performing the non-exclusive functions and
duties of the Assistant Secretary for
Enforcement and Compliance.
Appendix I
Scope of the Investigation
The merchandise subject to the
investigation is certain on-the-road steel
wheels, discs, and rims for tubeless tires,
with a nominal rim diameter of 22.5 inches
and 24.5 inches, regardless of width. Certain
on-the-road steel wheels with a nominal
wheel diameter of 22.5 inches and 24.5
inches are generally for Class 6, 7, and 8
commercial vehicles (as classified by the
Federal Highway Administration Gross
Vehicle Weight Rating system), including
tractors, semi-trailers, dump trucks, garbage
trucks, concrete mixers, and buses, and are
the current standard wheel diameters for
such applications. The standard widths of
certain on-the-road steel wheels are 7.5
inches, 8.25 inches, and 9.0 inches, but all
certain on-the-road steel wheels, regardless of
width, are covered by the scope. While 22.5
inches and 24.5 inches are standard wheel
sizes used by Class 6, 7, and 8 commercial
vehicles, the scope covers sizes that may be
adopted in the future for Class 6, 7, and 8
commercial vehicles.
The scope includes certain on-the-road
steel wheels with either a ‘‘hub-piloted’’ or
‘‘stud-piloted’’ mounting configuration, and
includes rims and discs for such wheels,
whether imported as an assembly or
separately. The scope includes certain onthe-road steel wheels, discs, and rims, of
carbon and/or alloy steel composition,
whether cladded or not cladded, whether
finished or not finished, and whether coated
or uncoated. All on-the-road wheels sold in
the United States are subject to the
requirements of the National Highway Traffic
Safety Administration and bear markings,
such as the ‘‘DOT’’ symbol, indicating
compliance with applicable motor vehicle
standards. See 49 CFR 571.120. The scope
includes certain on-the-road steel wheels
imported with or without the required
markings. Certain on-the-road steel wheels
imported as an assembly with a tire mounted
on the wheel and/or with a valve stem
attached are included. However, if the certain
on-the-road steel wheel is imported as an
assembly with a tire mounted on the wheel
and/or with a valve stem attached, the certain
on-the-road steel wheel is covered by the
scope, but the tire and/or valve stem is not
covered by the scope.
Excluded from the scope are:
(1) Steel wheels for tube-type tires that
require a removable side ring;
(2) aluminum wheels;
(3) wheels where steel represents less than
fifty percent of the product by weight; and
(4) steel wheels that do not meet National
Highway Traffic Safety Administration
requirements, other than the rim marking
requirements found in 49 CFR 571.120S5.2.
Imports of the subject merchandise are
currently classified under the following
PO 00000
Frm 00005
Fmt 4703
Sfmt 4703
Harmonized Tariff Schedule of the United
States (HTSUS) subheadings: 8708.70.4530,
8708.70.4560, 8708.70.6030, 8708.70.6060,
8716.90.5045, and 8716.90.5059.
Merchandise meeting the scope description
may also enter under the following HTSUS
subheadings: 4011.20.1015, 4011.20.5020,
and 8708.99.4850. While HTSUS
subheadings are provided for convenience
and customs purposes, the written
description of the subject merchandise is
dispositive.
Appendix II
List of Topics Discussed in the Preliminary
Decision Memorandum
I. Summary
II. Background
III. Period of Investigation
IV. Scope Of the Investigation
V. Discussion of the Methodology
A. Non-Market Economy Country
B. Separate Rate Status
C. The China-wide Entity
D. Application of Facts Available and
Adverse Inferences
VI. Adjustments Under Section 777(A)(F) of
the Act
VII. Adjustments Under Section 772(C) of the
Act
VIII. Conclusion
[FR Doc. 2018–23661 Filed 10–29–18; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
National Oceanic and Atmospheric
Administration
RIN 0648–XG371
Marine Mammals; File No. 22095
National Marine Fisheries
Service (NMFS), National Oceanic and
Atmospheric Administration (NOAA),
Commerce.
ACTION: Notice; receipt of application.
AGENCY:
Notice is hereby given that
SeaWorld, LLC., 9205 Southpark Center
Loop, Suite 400, Orlando, FL 32819
(Responsible Party: Christopher Dold,
DVM), has applied in due form for a
scientific research and enhancement
permit for one non-releasable beluga
whale (Delphinapterus leucas) from the
Cook Inlet distinct population segment
(DPS).
DATES: Written, telefaxed, or email
comments must be received on or before
November 29, 2018.
ADDRESSES: The application and related
documents are available for review by
selecting ‘‘Records Open for Public
Comment’’ from the ‘‘Features’’ box on
the Applications and Permits for
Protected Species (APPS) home page,
https://apps.nmfs.noaa.gov, and then
selecting File No. 22095 from the list of
available applications.
SUMMARY:
E:\FR\FM\30OCN1.SGM
30OCN1
Agencies
[Federal Register Volume 83, Number 210 (Tuesday, October 30, 2018)]
[Notices]
[Pages 54568-54570]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-23661]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
[A-570-082]
Certain Steel Wheels From the People's Republic of China:
Preliminary Determination of Sales at Less-Than-Fair-Value
AGENCY: Enforcement and Compliance, International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce (Commerce) preliminarily determines
that steel wheels from the People's Republic of China (China) are
being, or are likely to be, sold in the United States at less-than-
fair-value (LTFV) for the period of investigation (POI) July 1, 2017,
through December 31, 2017. Interested parties are invited to comment on
this preliminary determination.
DATES: Applicable October 30, 2018.
FOR FURTHER INFORMATION CONTACT: Lingjun Wang, AD/CVD Operations,
Office VII, Enforcement and Compliance, International Trade
Administration, U.S. Department of Commerce, 1401 Constitution Avenue
NW, Washington, DC 20230; telephone: (202) 482-2316.
SUPPLEMENTARY INFORMATION:
Background
This preliminary determination is made in accordance with section
733(b) of the Tariff Act of 1930, as amended (the Act). Commerce
published the notice of initiation of this investigation on April 24,
2018.\1\ On August 20, 2018, Commerce postponed the preliminary
determination of this investigation and the revised deadline is now
October 23, 2018.\2\ For a complete description of the events that
followed the initiation of this investigation, see the Preliminary
Decision Memorandum.\3\ A list of topics included in the Preliminary
Decision Memorandum is included as Appendix II to this notice. The
Preliminary Decision Memorandum is a public document and is on file
electronically via Enforcement and Compliance's Antidumping and
Countervailing Duty
[[Page 54569]]
Centralized Electronic Service System (ACCESS). ACCESS is available to
registered users at https://access.trade.gov, and it is available to
all parties in the Central Records Unit, room B8024 of the main
building of Commerce. In addition, a complete version of the
Preliminary Decision Memorandum can be accessed directly at https://enforcement.trade.gov/frn/. The signed and the electronic versions of
the Preliminary Decision Memorandum are identical in content.
---------------------------------------------------------------------------
\1\ See Certain Steel Wheels from the People's Republic of
China: Initiation of Less-Than-Fair-Value Investigation, 83 FR 17798
(April 24, 2018) (Initiation Notice).
\2\ See Steel Wheels from the People's Republic of China:
Postponement of Preliminary Determination in the Less-Than-Fair-
Value Investigation, 83 FR 42110 (August 20, 2018).
\3\ See Memorandum re: Decision Memorandum for the Preliminary
Determination in the Less-Than-Fair-Value Investigation of Certain
Steel Wheels from the People's Republic of China, dated concurrently
with, and hereby adopted by, this notice (Preliminary Decision
Memorandum).
---------------------------------------------------------------------------
Scope of the Investigation
The products covered by this investigation are steel wheels from
China. For a complete description of the scope of this investigation,
see Appendix I.
Scope Comments
In accordance with the preamble to Commerce's regulations,\4\ the
Initiation Notice set aside a period of time for parties to raise
issues regarding product coverage (i.e., scope).\5\ No interested party
commented on the scope of the investigation as it appeared in the
Initiation Notice. Commerce is not modifying the scope language as it
appeared in the Initiation Notice. See the scope in Appendix I.
---------------------------------------------------------------------------
\4\ See Antidumping Duties; Countervailing Duties, Final Rule,
62 FR 27296, 27323 (May 19, 1997).
\5\ See Initiation Notice.
---------------------------------------------------------------------------
Methodology
Commerce is conducting this investigation in accordance with
section 731 of the Act. Pursuant to section 776(a) and (b) of the Act,
we have preliminarily relied upon facts otherwise available, with
adverse inferences, for the China-wide entity because it did not
respond to our requests for information. Specifically, two mandatory
respondents withdrew their participation, and no other companies have
demonstrated their eligibility for a separate rate; thus, all companies
are preliminarily found to be part of the China-wide entity.
Furthermore, we find that the China-wide entity's lack of
participation, including the failure of certain parts of the China-wide
entity to respond to Commerce's questionnaires, constitute
circumstances under which it is reasonable to conclude that the China-
wide entity as a whole failed to cooperate to the best of its ability
to comply with Commerce's requests for information. For a full
description of the methodology underlying Commerce's preliminary
determination, see the Preliminary Decision Memorandum.
Preliminary Determination
Commerce preliminarily determines that the following estimated
weighted-average dumping margins exist:
------------------------------------------------------------------------
Estimated
weighted-
Producer Exporter average dumping
margin
(percent)
------------------------------------------------------------------------
China-Wide Entity................ China-Wide Entity... 231.70
------------------------------------------------------------------------
Suspension of Liquidation
In accordance with section 733(d)(2) of the Act, Commerce will
direct U.S. Customs and Border Protection (CBP) to suspend liquidation
of subject merchandise as described in the scope of the investigation
section entered, or withdrawn from warehouse, for consumption on or
after the date of publication of this notice in the Federal Register,
as discussed below. Further, pursuant to section 733(d)(1)(B) of the
Act and 19 CFR 351.205(d), Commerce will instruct CBP to require a cash
deposit equal to the amount by which normal value exceeds U.S. price,
adjusted, as appropriate, for export subsidies, as indicated in the
chart above.
To determine the cash deposit rate, Commerce normally adjusts the
estimated weighted-average dumping margin by the amount of domestic
subsidy pass-through and export subsidies determined in a companion CVD
proceeding when CVD provisional measures are in effect. Accordingly,
where Commerce has made a preliminary affirmative determination for
domestic subsidy pass-through or export subsidies, Commerce has offset
the calculated estimated weighted-average dumping margin by the
appropriate rate(s). As discussed in the Preliminary Decision
Memorandum, we have made no adjustment for domestic subsidy pass-
through. As further explained in the Preliminary Decision Memorandum,
as an extension of our AFA finding for the China-wide entity, the
appropriate export subsidy adjustment is the lowest amount of export
subsidies found for any respondent in the companion CVD investigation,
which is zero.
These suspension of liquidation instructions will remain in effect
until further notice.
Disclosure
Normally, Commerce discloses to interested parties the calculations
performed in connection with a preliminary determination within five
days of its public announcement or, if there is no public announcement,
within five days of the date of publication of this notice in
accordance with 19 CFR 351.224(b). However, because Commerce
preliminarily applied total AFA to companies in this investigation in
accordance with section 776 of the Act, and the applied AFA rate is
based solely on the petition, there are no calculations to disclose.
Verification
Because the mandatory respondents withdrew their participation,
Commerce preliminarily determines each of the mandatory respondents to
have been uncooperative, and verification of Sunrise and Jingu will not
be conducted.
Public Comment
Case briefs or other written comments may be submitted to the
Assistant Secretary for Enforcement and Compliance no later than 45
days after the date of publication of the preliminary determination,
unless the Secretary alters the time limit. Rebuttal briefs, limited to
issues raised in case briefs, may be submitted no later than five days
after the deadline date for case briefs.\6\ Pursuant to 19 CFR
351.309(c)(2) and (d)(2), parties who submit case briefs or rebuttal
briefs in this investigation are encouraged to submit with each
argument: (1) A statement of the issue; (2) a brief summary of the
argument; and (3) a table of authorities.
---------------------------------------------------------------------------
\6\ See 19 CFR 351.309; see also 19 CFR 351.303 (for general
filing requirements).
---------------------------------------------------------------------------
[[Page 54570]]
Pursuant to 19 CFR 351.310(c), interested parties who wish to
request a hearing, limited to issues raised in the case and rebuttal
briefs, must submit a written request to the Assistant Secretary for
Enforcement and Compliance, U.S. Department of Commerce, within 30 days
after the date of publication of this notice. Requests should contain
the party's name, address, and telephone number, the number of
participants, whether any participant is a foreign national, and a list
of the issues to be discussed. If a request for a hearing is made,
Commerce intends to hold the hearing at the U.S. Department of
Commerce, 1401 Constitution Avenue NW, Washington, DC 20230, at a time
and date to be determined. Parties should confirm the date, time, and
location of the hearing two days before the scheduled date.
Final Determination
Section 735(a)(1) of the Act and 19 CFR 351.210(b)(1) provide that
Commerce will issue the final determination within 75 days after the
date of its preliminary determination. However, on August 15, 2018,
pursuant to section 735(a)(2) of the Act, Sunrise requested that
Commerce postpone the final determination and extend provisional
measures from four months to six months.\7\ In accordance with 19 CFR
351.210(e)(2), we are still considering this request. Should we
determine to postpone the final determination and extend provisional
measures, we will publish a notification in the Federal Register.\8\
---------------------------------------------------------------------------
\7\ See Sunrise's August 15, 2018 Request to Postpone Final
Determination.
\8\ See 19 CFR 351.210(g).
---------------------------------------------------------------------------
International Trade Commission Notification
In accordance with section 733(f) of the Act, Commerce will notify
the International Trade Commission (ITC) of its preliminary
determination of sales at LTFV. If the final determination is
affirmative, the ITC will determine before the later of 120 days after
the date of this preliminary determination or 45 days after the final
determination whether imports of the subject merchandise are materially
injuring, or threaten material injury to, the U.S. industry.
Notification to Interested Parties
This determination is issued and published in accordance with
sections 733(f) and 777(i)(1) of the Act and 19 CFR 351.205(c).
Dated: October 23, 2018.
Gary Taverman,
Deputy Assistant Secretary for Antidumping and Countervailing Duty
Operations, performing the non-exclusive functions and duties of the
Assistant Secretary for Enforcement and Compliance.
Appendix I
Scope of the Investigation
The merchandise subject to the investigation is certain on-the-
road steel wheels, discs, and rims for tubeless tires, with a
nominal rim diameter of 22.5 inches and 24.5 inches, regardless of
width. Certain on-the-road steel wheels with a nominal wheel
diameter of 22.5 inches and 24.5 inches are generally for Class 6,
7, and 8 commercial vehicles (as classified by the Federal Highway
Administration Gross Vehicle Weight Rating system), including
tractors, semi-trailers, dump trucks, garbage trucks, concrete
mixers, and buses, and are the current standard wheel diameters for
such applications. The standard widths of certain on-the-road steel
wheels are 7.5 inches, 8.25 inches, and 9.0 inches, but all certain
on-the-road steel wheels, regardless of width, are covered by the
scope. While 22.5 inches and 24.5 inches are standard wheel sizes
used by Class 6, 7, and 8 commercial vehicles, the scope covers
sizes that may be adopted in the future for Class 6, 7, and 8
commercial vehicles.
The scope includes certain on-the-road steel wheels with either
a ``hub-piloted'' or ``stud-piloted'' mounting configuration, and
includes rims and discs for such wheels, whether imported as an
assembly or separately. The scope includes certain on-the-road steel
wheels, discs, and rims, of carbon and/or alloy steel composition,
whether cladded or not cladded, whether finished or not finished,
and whether coated or uncoated. All on-the-road wheels sold in the
United States are subject to the requirements of the National
Highway Traffic Safety Administration and bear markings, such as the
``DOT'' symbol, indicating compliance with applicable motor vehicle
standards. See 49 CFR 571.120. The scope includes certain on-the-
road steel wheels imported with or without the required markings.
Certain on-the-road steel wheels imported as an assembly with a tire
mounted on the wheel and/or with a valve stem attached are included.
However, if the certain on-the-road steel wheel is imported as an
assembly with a tire mounted on the wheel and/or with a valve stem
attached, the certain on-the-road steel wheel is covered by the
scope, but the tire and/or valve stem is not covered by the scope.
Excluded from the scope are:
(1) Steel wheels for tube-type tires that require a removable
side ring;
(2) aluminum wheels;
(3) wheels where steel represents less than fifty percent of the
product by weight; and
(4) steel wheels that do not meet National Highway Traffic
Safety Administration requirements, other than the rim marking
requirements found in 49 CFR 571.120S5.2.
Imports of the subject merchandise are currently classified
under the following Harmonized Tariff Schedule of the United States
(HTSUS) subheadings: 8708.70.4530, 8708.70.4560, 8708.70.6030,
8708.70.6060, 8716.90.5045, and 8716.90.5059. Merchandise meeting
the scope description may also enter under the following HTSUS
subheadings: 4011.20.1015, 4011.20.5020, and 8708.99.4850. While
HTSUS subheadings are provided for convenience and customs purposes,
the written description of the subject merchandise is dispositive.
Appendix II
List of Topics Discussed in the Preliminary Decision Memorandum
I. Summary
II. Background
III. Period of Investigation
IV. Scope Of the Investigation
V. Discussion of the Methodology
A. Non-Market Economy Country
B. Separate Rate Status
C. The China-wide Entity
D. Application of Facts Available and Adverse Inferences
VI. Adjustments Under Section 777(A)(F) of the Act
VII. Adjustments Under Section 772(C) of the Act
VIII. Conclusion
[FR Doc. 2018-23661 Filed 10-29-18; 8:45 am]
BILLING CODE 3510-DS-P