Refillable Stainless Steel Kegs From the People's Republic of China: Initiation of Countervailing Duty Investigation, 52192-52195 [2018-22483]

Download as PDF 52192 Federal Register / Vol. 83, No. 200 / Tuesday, October 16, 2018 / Notices Under Section 305(a) of the Act and 15 CFR 325.11(a), any person aggrieved by the Secretary’s determination may, within 30 days of the date of this notice, bring an action in any appropriate district court of the United States to set aside the determination on the ground that the determination is erroneous. Description of Certified Conduct FCE’s Export Trade Certificate of Review has been amended to add the following Member of the Certificate within the meaning of section 325.2(1) of the Regulations (15 CFR 325.2(1)): Egan Fruit Packing, LLC. FCE’s Export Trade Certificate of Review Membership, as amended, is listed below: Egan Fruit Packing, LLC, Ft. Pierce, Florida Golden River Fruit Co., Vero Beach, Florida Hogan and Sons, Inc., Vero Beach, Florida Indian River Exchange Packers, Inc., Vero Beach, Florida Leroy E. Smith’s Sons, Inc., Vero Beach, Florida The Packers of Indian River, Ltd., Ft. Pierce, Florida Premier Citrus Marketing, LLC, Vero Beach, Florida River One International Marketing, Inc., Vero Beach, Florida Riverfront Packing Co. LLC, Vero Beach, Florida Seald Sweet LLC, Vero Beach, Florida The effective date of the amended certificate is April 17, 2018, the date on which FCE’s application to amend was deemed submitted. Dated: October 10, 2018. Joseph Flynn, Director, Office of Trade and Economic Analysis, International Trade Administration, U.S. Department of Commerce. [FR Doc. 2018–22417 Filed 10–15–18; 8:45 am] BILLING CODE 3510–DR–P DEPARTMENT OF COMMERCE International Trade Administration [C–570–094 ] amozie on DSK3GDR082PROD with NOTICES1 Refillable Stainless Steel Kegs From the People’s Republic of China: Initiation of Countervailing Duty Investigation Enforcement and Compliance, International Trade Administration, Department of Commerce. AGENCY: DATES: Applicable October 10, 2018. FOR FURTHER INFORMATION CONTACT: Nicholas Czajkowski or Robert Brown at (202) 482–1395 or (202) 482–3702, VerDate Sep<11>2014 18:44 Oct 15, 2018 Jkt 247001 respectively, AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230. SUPPLEMENTARY INFORMATION: The Petition On September 20, 2018, the U.S. Department of Commerce (Commerce) received a countervailing duty petition (CVD Petition) concerning imports of refillable stainless steel kegs (kegs) from the People’s Republic of China (China), filed in proper form on behalf of the American Keg Company LLC (the petitioner), a domestic producer of kegs.1 The CVD Petition was accompanied by antidumping duty (AD) petitions concerning imports of kegs from China, Germany, and Mexico. On September 25, 2018, Commerce requested supplemental information pertaining to certain aspects of the Petition in two separate supplemental questionnaires, one addressing the programs alleged as countervailable subsidies, and one primarily addressing scope clarification issues.2 The petitioner filed additional information on September 27, 2018.3 In accordance with section 702(b)(1) of the Tariff Act of 1930, as amended (the Act), the petitioner alleges that the Government of China (GOC) is providing countervailable subsidies, within the meaning of sections 701 and 771(5) of the Act, to producers of kegs in China and that imports of such products are materially injuring, or threatening material injury to, the domestic kegs industry in the United States. Consistent with section 702(b)(1) of the Act and 19 CFR 351.202(b), for those alleged programs on which we are initiating a CVD investigation, the Petition is accompanied by information 1 See the petitioner’s letter, ‘‘Petitions for the Imposition of Antidumping Duties on Imports of Refillable Stainless Steel Kegs from Germany, Mexico, and the People’s Republic Of China and Countervailing Duties on Imports of Refillable Stainless Steel Kegs from the People’s Republic Of China,’’ dated September 20, 2018 (the Petition). 2 See Commerce’s Letters titled ‘‘Petition for the Imposition of Countervailing Duties on Imports of Refillable Stainless Steel Kegs from the People’s Republic of China: Supplemental Questions,’’ and ‘‘Petitions for the Imposition of Antidumping Duties on Imports of Refillable Stainless Steel Kegs from the People’s Republic of China, the Federal Republic of Germany, and Mexico, and Countervailing Duty Imports from the People’s Republic of China: Supplemental Questions,’’ both dated September 25, 2018. 3 See the petitioner’s Letter, ‘‘Supplement to the Petition for the Imposition of Countervailing Duties on Imports of Refillable Stainless Steel Kegs from China: Response to the Department’s Supplemental Questions,’’ dated September 27, 2018 (Supplement). PO 00000 Frm 00005 Fmt 4703 Sfmt 4703 reasonably available to the petitioner supporting its allegations. Commerce finds that the petitioner filed the Petition on behalf of the domestic industry because the petitioner is an interested party as defined in section 771(9)(E) of the Act. Commerce also finds that the petitioner demonstrated sufficient industry support necessary for the initiation of the requested CVD investigation.4 Period of Investigation Because the Petition was filed on September 20, 2018, the period of investigation is January 1, 2017, through December 31, 2017. Scope of the Investigation The product covered by this investigation is kegs from China. For a full description of the scope of these investigations, see the Appendix to this notice. Comments on the Scope of the Investigation During our review of the Petition, we contacted the petitioners regarding the proposed scope to ensure that the scope language in the Petitions is an accurate reflection of the products for which the domestic industry is seeking relief.5 As a result, the scope of the Petitions was modified to clarify the description of merchandise covered by the Petitions. The description of the merchandise covered by these investigations, as described in the Appendix to this notice, reflects these clarifications. As discussed in the Preamble to Commerce’s regulations, we are setting aside a period for interested parties to raise issues regarding product coverage (scope).6 Commerce will consider all comments received from interested parties and, if necessary, will consult with interested parties prior to the issuance of the preliminary determination. If scope comments include factual information,7 all such factual information should be limited to public information. To facilitate preparation of its questionnaires, Commerce requests that all interested parties submit such comments by 5:00 p.m. Eastern Time (ET) on October 30, 2018, which is 20 calendar days from the signature date of this notice. Any 4 See the ‘‘Determination of Industry Support for the Petition’’ section, infra. 5 See Supplement at ‘‘General Issues Questionnaire’’ section (General Issues Supplement) at 1–9; see also Revised Scope, at Exhibit 1. 6 See Antidumping Duties; Countervailing Duties, Final Rule, 62 FR 27296, 27323 (May 19, 1997) (Preamble). 7 See 19 CFR 351.102(b)(21) (defining ‘‘factual information’’). E:\FR\FM\16OCN1.SGM 16OCN1 Federal Register / Vol. 83, No. 200 / Tuesday, October 16, 2018 / Notices rebuttal comments, which may include factual information, must be filed by 5:00 p.m. ET on November 9, 2018, which is 10 calendar days from the initial comments deadline.8 Commerce requests that any factual information parties consider relevant to the scope of the investigation be submitted during this period. However, if a party subsequently finds that additional factual information pertaining to the scope of the investigation may be relevant, the party may contact Commerce and request permission to submit the additional information. All such submissions must be filed on the records of the concurrent AD and CVD investigations. Filing Requirements All submissions to Commerce must be filed electronically using Enforcement and Compliance’s Antidumping Duty and Countervailing Duty Centralized Electronic Service System (ACCESS).9 An electronically filed document must be received successfully in its entirety by the time and date it is due. Documents exempted from the electronic submission requirements must be filed manually (i.e., in paper form) with Enforcement and Compliance’s APO/Dockets Unit, Room 18022, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230, and stamped with the date and time of receipt by the applicable deadlines. Consultations Pursuant to sections 702(b)(4)(A)(i) and (ii) of the Act, Commerce notified representatives of the GOC of the receipt of the Petition and provided them the opportunity for consultations with respect to the CVD Petition.10 The GOC did not request consultations. Determination of Industry Support for the Petition Section 702(b)(1) of the Act requires that a petition be filed on behalf of the domestic industry. Section 702(c)(4)(A) 8 See 19 CFR 351.303(b). Antidumping and Countervailing Duty Proceedings: Electronic Filing Procedures; Administrative Protective Order Procedures, 76 FR 39263 (July 6, 2011). See also Enforcement and Compliance: Change of Electronic Filing System Name, 79 FR 69046 (November 20, 2014) for details of Commerce’s electronic filing requirements, which went into effect on August 5, 2011. Information on help using ACCESS can be found at https://access.trade.gov/help.aspx, and a handbook can be found at https://access.trade.gov/help/ Handbook%20on%20Electronic%20Filling%20 Procedures.pdf. 10 See Commerce’s Letter, ‘‘Countervailing Duty Petition on Refillable Stainless Steel Kegs from the People’s Republic of China,’’ dated September 21, 2018. amozie on DSK3GDR082PROD with NOTICES1 9 See VerDate Sep<11>2014 18:44 Oct 15, 2018 Jkt 247001 of the Act provides that a petition meets this requirement if the domestic producers or workers who support the petition account for: (i) At least 25 percent of the total production of the domestic like product; and (ii) more than 50 percent of the production of the domestic like product produced by that portion of the industry expressing support for, or opposition to, the petition. Moreover, section 702(c)(4)(D) of the Act provides that, if the petition does not establish support of domestic producers or workers accounting for more than 50 percent of the total production of the domestic like product, Commerce shall: (i) Poll the industry or rely on other information in order to determine if there is support for the petition; or (ii) if there is a large number of producers in the domestic industry, determine industry support using any statistically valid sampling method to poll the ‘‘industry.’’ Section 771(4)(A) of the Act defines the ‘‘industry’’ as the producers as a whole of a domestic like product. Thus, to determine whether a petition has the requisite industry support, the statute directs Commerce to look to producers and workers who produce the domestic like product. The International Trade Commission (ITC), which is responsible for determining whether ‘‘the domestic industry’’ has been injured, must also determine what constitutes a domestic like product in order to define the industry. While both Commerce and the ITC must apply the same statutory definition regarding the domestic like product,11 they do so for different purposes and pursuant to a separate and distinct authority. In addition, Commerce’s determination is subject to limitations of time and information. Although this may result in different definitions of the like product, such differences do not render the decision of either agency contrary to law.12 Section 771(10) of the Act defines the domestic like product as ‘‘a product which is like, or in the absence of like, most similar in characteristics and uses with, the article subject to an investigation under this title.’’ Thus, the reference point from which the domestic like product analysis begins is ‘‘the article subject to an investigation’’ (i.e., the class or kind of merchandise to be investigated, which normally will be the scope as defined in the petition). With regard to the domestic like product, the petitioner does not offer a 11 See section 771(10) of the Act. USEC, Inc. v. United States, 132 F. Supp. 2d 1, 8 (CIT 2001) (citing Algoma Steel Corp., Ltd. v. United States, 688 F. Supp. 639, 644 (CIT 1988), aff’d 865 F.2d 240 (Fed. Cir. 1989)). 12 See PO 00000 Frm 00006 Fmt 4703 Sfmt 4703 52193 definition of the domestic like product distinct from the scope of the investigation.13 Based on our analysis of the information submitted on the record, we have determined that kegs, as defined in the scope, constitute a single domestic like product, and we have analyzed industry support in terms of that domestic like product.14 In determining whether the petitioner has standing under section 702(c)(4)(A) of the Act, we considered the industry support data contained in the Petition with reference to the domestic like product as defined in the ‘‘Scope of the Investigation,’’ in the Appendix to this notice. To establish industry support, the petitioner provided its own production of the domestic like product in 2017.15 The petitioner states that there are no other known producers of kegs in the United States; therefore, the Petition is supported by 100 percent of the U.S. industry.16 Our review of the data provided in the Petition, the General Issues Supplement, and other information readily available to Commerce indicates that the petitioner has established industry support for the Petition.17 First, the Petition established support from domestic producers (or workers) accounting for more than 50 percent of the total production of the domestic like product and, as such, Commerce is not required to take further action in order to evaluate industry support (e.g., polling).18 Second, the domestic producers (or workers) have met the statutory criteria for industry support under section 702(c)(4)(A)(i) of the Act because the domestic producers (or workers) who support the Petition account for at least 25 percent of the total production of the domestic like product.19 Finally, the domestic 13 See Volume I of the Petition, at 33–36. a discussion of the domestic like product analysis as applied to this case and information regarding industry support, see Countervailing Duty Investigation Initiation Checklist: Refillable Stainless Steel Kegs from the People’s Republic of China (China CVD Initiation Checklist), at Attachment II, Analysis of Industry Support for the Antidumping and Countervailing Duty Petitions Covering Refillable Stainless Steel Kegs from the People’s Republic of China, the Federal Republic of Germany, and Mexico (Attachment II). This checklist is dated concurrently with this notice and on file electronically via ACCESS. Access to documents filed via ACCESS is also available in the Central Records Unit, Room B8024 of the main Department of Commerce building. 15 See Volume I of the Petition at 49 and 51. 16 Id. at 5–6 and Exhibit GEN–10; see also General Issues Supplement, at 10–18 and Exhibit SUPP– GEN–6. 17 Id. 18 Id.; see also section 702(c)(4)(D) of the Act. 19 See China CVD Initiation Checklist, at Attachment II. 14 For E:\FR\FM\16OCN1.SGM 16OCN1 52194 Federal Register / Vol. 83, No. 200 / Tuesday, October 16, 2018 / Notices producers (or workers) have met the statutory criteria for industry support under section 702(c)(4)(A)(ii) of the Act because the domestic producers (or workers) who support the Petition account for more than 50 percent of the production of the domestic like product produced by that portion of the industry expressing support for, or opposition to, the Petition.20 Accordingly, Commerce determines that the Petition was filed on behalf of the domestic industry within the meaning of section 702(b)(1) of the Act. Commerce finds that the petitioner filed the Petition on behalf of the domestic industry because it is an interested party as defined in section 771(9)(C) of the Act, and it has demonstrated sufficient industry support with respect to the CVD investigation that it is requesting that Commerce initiate.21 amozie on DSK3GDR082PROD with NOTICES1 Injury Test Because China is a ‘‘Subsidies Agreement Country’’ within the meaning of section 701(b) of the Act, section 701(a)(2) of the Act applies to this investigation. Accordingly, the ITC must determine whether imports of the subject merchandise from China materially injure, or threaten material injury to, a U.S. industry. Allegations and Evidence of Material Injury and Causation The petitioner alleges that imports of the subject merchandise are benefitting from countervailable subsidies and that such imports are causing, or threaten to cause, material injury to the U.S. industry producing the domestic like product. In addition, the petitioner alleges that subject imports exceed the negligibility threshold provided for under section 771(24)(A) of the Act.22 The petitioner contends that the industry’s injured condition is illustrated by a significant volume of subject imports and an increasing share of subject imports relative to total imports; underselling and price depression or suppression; recent declines in production and capacity utilization; negative impact on the domestic industry’s investment, cash flows, and inventories; decline in the domestic industry’s financial performance; and lost sales and revenues.23 We have assessed the allegations and supporting evidence regarding material injury, threat of 20 Id. 21 Id. 22 See Volume I of the Petition, at 37–38. at 23–33, 37–53, and Exhibit GEN–35; see also General Issues Supplement, at 18–33 and Exhibit SUPP GEN–7. 23 Id. VerDate Sep<11>2014 18:44 Oct 15, 2018 Jkt 247001 material injury, causation, as well as cumulation, and we have determined that these allegations are properly supported by adequate evidence, and meet the statutory requirements for initiation.24 Initiation of CVD Investigation Based on the examination of the Petition, we find that the Petition meets the requirements of section 702 of the Act. Therefore, we are initiating a CVD investigation to determine whether imports of kegs from China benefit from countervailable subsidies conferred by the GOC. In accordance with section 703(b)(1) of the Act and 19 CFR 351.205(b)(1), unless postponed, we will make our preliminary determination no later than 65 days after the date of this initiation. Based on our review of the Petition, we find that there is sufficient information to initiate a CVD investigation on 21 of the 24 subsidy programs alleged in the petition. For a full discussion of the basis for our decision to initiate or not on each program, see China CVD Initiation Checklist. A public version of the initiation checklist for this investigation is available on ACCESS. Respondent Selection The petitioner named 26 producers/ exporters as accounting for the majority of exports of kegs to the United States from China.25 In the event Commerce determines that the number of companies is large and it cannot individually examine each company based upon Commerce’s resources, where appropriate, Commerce intends to select mandatory respondents based on quantity and value (Q&V) questionnaires issued to potential respondents. Commerce normally selects mandatory respondents in a CVD investigation using U.S. Customs and Border Protection (CBP) entry data. However, for this investigation, the Harmonized Tariff Schedule of the United States (HTSUS) numbers under which the subject merchandise would enter (7310.10.0010, 7310.10.0050, 7310.29.0025, and 7310.29.0050) are basket categories containing a wide variety of manufactured steel products unrelated to kegs. We, therefore, cannot rely on CBP entry data in selecting 24 See China CVD Initiation Checklist, at Attachment III, Analysis of Allegations and Evidence of Material Injury and Causation for the Antidumping and Countervailing Duty Petitions Covering Refillable Stainless Steel Kegs from the People’s Republic of China, the Federal Republic of Germany, and Mexico (Attachment III). 25 See Volume I of the Petition at Exhibit GEN– 23. PO 00000 Frm 00007 Fmt 4703 Sfmt 4703 respondents. We instead intend to issue Q&V questionnaires to each potential respondent, for which the petitioner has provided a complete address. Commerce will post the Q&V questionnaire along with the filing instructions on the Enforcement and Compliance website at https://trade.gov/enforcement/news.asp. Exporters and producers of kegs from China that do not receive Q&V questionnaires by mail may still submit a response to the Q&V questionnaire and can obtain a copy of the Q&V questionnaire from the Enforcement and Compliance website, at the URL given above. Responses to the Q&V questionnaire must be submitted by the relevant Chinese exporters/producers no later than 5:00 p.m. ET on October 24, 2018, which is two weeks from the signature date of this notice. All Q&V responses must be filed electronically via ACCESS. We intend to finalize our decisions regarding respondent selection within 20 days of publication of this notice. Interested parties must submit applications for disclosure under APO in accordance with 19 CFR 351.305(b). Instructions for filing such applications may be found on the Commerce’s website at https://enforcement.trade.gov/ apo. Distribution of Copies of the Petition In accordance with section 702(b)(4)(A)(i) of the Act and 19 CFR 351.202(f), copies of the public version of the Petition have been provided to the GOC via ACCESS. To the extent practicable, we will attempt to provide a copy of the public version of the Petition to each exporter named in the Petitions, as provided under 19 CFR 351.203(c)(2). ITC Notification We will notify the ITC of our initiation, as required by section 702(d) of the Act. Preliminary Determinations by the ITC The ITC will preliminarily determine, within 45 days after the date on which the Petition was filed, whether there is a reasonable indication that imports of kegs from China are materially injuring, or threatening material injury to, a U.S. industry.26 A negative ITC determination will result in the investigation being terminated.27 Otherwise, this investigation will proceed according to statutory and regulatory time limits. 26 See 27 See E:\FR\FM\16OCN1.SGM section 703(a)(2) of the Act. section 703(a)(1) of the Act. 16OCN1 Federal Register / Vol. 83, No. 200 / Tuesday, October 16, 2018 / Notices Submission of Factual Information Factual information is defined in 19 CFR 351.102(b)(21) as: (i) Evidence submitted in response to questionnaires; (ii) evidence submitted in support of allegations; (iii) publicly available information to value factors under 19 CFR 351.408(c) or to measure the adequacy of remuneration under 19 CFR 351.511(a)(2); (iv) evidence placed on the record by Commerce; and (v) evidence other than factual information described in (i)–(iv). 19 CFR 351.301(b) requires any party, when submitting factual information, to specify under which subsection of 19 CFR 351.102(b)(21) the information is being submitted 28 and, if the information is submitted to rebut, clarify, or correct factual information already on the record, to provide an explanation identifying the information already on the record that the factual information seeks to rebut, clarify, or correct.29 Time limits for the submission of factual information are addressed in 19 CFR 351.301, which provides specific time limits based on the type of factual information being submitted. Interested parties should review the regulations prior to submitting factual information in these investigations. amozie on DSK3GDR082PROD with NOTICES1 Extensions of Time Limits Parties may request an extension of time limits before the expiration of a time limit established under 19 CFR 351.301, or as otherwise specified by the Secretary. In general, an extension request will be considered untimely if it is filed after the expiration of the time limit established under 19 CFR 351.301. For submissions that are due from multiple parties simultaneously, an extension request will be considered untimely if it is filed after 10:00 a.m. ET on the due date. Under certain circumstances, we may elect to specify a different time limit by which extension requests will be considered untimely for submissions which are due from multiple parties simultaneously. In such a case, we will inform parties in the letter or memorandum setting forth the deadline (including a specified time) by which extension requests must be filed to be considered timely. An extension request must be made in a separate, stand-alone submission; under limited circumstances we will grant untimely-filed requests for the extension of time limits. Parties should review Extension of Time Limits; Final Rule, 78 FR 57790 (September 20, 2013), available at https://www.gpo.gov/fdsys/ 28 See 29 See 19 CFR 351.301(b). 19 CFR 351.301(b)(2). VerDate Sep<11>2014 18:44 Oct 15, 2018 Jkt 247001 pkg/FR-2013-09-20/html/201322853.htm, prior to submitting factual information in these investigations. Certification Requirements Any party submitting factual information in an AD or CVD proceeding must certify to the accuracy and completeness of that information.30 Parties must use the certification formats provided in 19 CFR 351.303(g).31 Commerce intends to reject factual submissions if the submitting party does not comply with the applicable certification requirements. Notification to Interested Parties Interested parties must submit applications for disclosure under APO in accordance with 19 CFR 351.305. On January 22, 2008, Commerce published Antidumping and Countervailing Duty Proceedings: Documents Submission Procedures; APO Procedures, 73 FR 3634 (January 22, 2008). Parties wishing to participate in this investigation should ensure that they meet the requirements of these procedures (e.g., the filing of letters of appearance as discussed at 19 CFR 351.103(d)). This notice is issued and published pursuant to sections 702 and 777(i) of the Act and 19 CFR 351.203(c). Dated: October 10, 2018. Gary Taverman, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, performing the non-exclusive functions and duties of the Assistant Secretary for Enforcement and Compliance. Appendix Scope of the Investigation The merchandise covered by this investigation are kegs, vessels, or containers that are approximately cylindrical in shape, made from stainless steel (i.e., steel containing at least 10.5 percent chromium by weight and less than 1.2 percent carbon by weight, with or without other elements), and that are compatible with a ‘‘D Sankey’’ extractor (commonly known as a ‘‘D Coupler’’ or ‘‘Sankey’’) (refillable stainless steel kegs) with a nominal liquid volume capacity of 10 liters or more, regardless of the type of finish, gauge, thickness, or grade of stainless steel, and whether or not covered by or encased in other materials. Refillable stainless steel kegs may be imported assembled or unassembled, with or without all components (including spears, couplers or 30 See section 782(b) of the Act. Certification of Factual Information to Import Administration During Antidumping and Countervailing Duty Proceedings, 78 FR 42678 (July 17, 2013) (‘‘Final Rule’’); see also frequently asked questions regarding the Final Rule, available at https://enforcement.trade.gov/tlei/notices/factual_ info_final_rule_FAQ_07172013.pdf. 31 See PO 00000 Frm 00008 Fmt 4703 Sfmt 4703 52195 taps, necks, collars, and valves), and be filled or unfilled. ‘‘Unassembled’’ or ‘‘unfinished’’ refillable stainless steel kegs include drawn stainless steel cylinders that have been welded to form the body of the keg and welded to an upper (top) chime and/or lower (bottom) chime. Unassembled refillable stainless steel kegs may or may not be welded to a neck, may or may not have a valve assembly attached, and may be otherwise complete except for testing, certification, and/or marking. Subject merchandise also includes refillable stainless steel kegs that have been further processed in a third country, including but not limited to, attachment of necks, collars, spears or valves, heat treatment, pickling, passivation, painting, testing, certification or any other processing that would not otherwise remove the merchandise from the scope of the investigation if performed in the country of manufacture of the in-scope refillable stainless steel keg. Specifically excluded are the following: (1) Vessels or containers that are not approximately cylindrical in nature (e.g., box, ‘‘hopper’’ or ‘‘cone’’ shaped vessels); (2) stainless steel kegs, vessels, or containers that have either a ‘‘ball lock’’ valve system or a ‘‘pin lock’’ valve system (commonly known as ‘‘Cornelius,’’ ‘‘corny’’ or ‘‘ball lock’’ kegs); (3) necks, spears, couplers or taps, collars, and valves that are not imported with the subject merchandise; and (4) stainless steel kegs that are filled with beer, wine, or other liquid and that are designated by the Commissioner of Customs as Instruments of International Traffic within the meaning of section 332(a) of the Tariff Act of 1930, as amended. The merchandise covered by this investigation are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under subheadings 7310.10.0010, 7310.00.0050, 7310.29.0025, and 7310.29.0050. These HTSUS subheadings are provided for convenience and customs purposes; the written description of the scope of this investigation is dispositive. [FR Doc. 2018–22483 Filed 10–15–18; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [A–570–093, A–428–846, A–201–849] Refillable Stainless Steel Kegs From the People’s Republic of China, the Federal Republic of Germany, and Mexico: Initiation of Less-Than-FairValue Investigations Enforcement and Compliance, International Trade Administration, Department of Commerce. DATES: Applicable October 10, 2018. FOR FURTHER INFORMATION CONTACT: Thomas Schauer at (202) 482–0410 and Aimee Phelan at (202) 482–0697 (the AGENCY: E:\FR\FM\16OCN1.SGM 16OCN1

Agencies

[Federal Register Volume 83, Number 200 (Tuesday, October 16, 2018)]
[Notices]
[Pages 52192-52195]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-22483]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[C-570-094 ]


Refillable Stainless Steel Kegs From the People's Republic of 
China: Initiation of Countervailing Duty Investigation

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.


DATES: Applicable October 10, 2018.

FOR FURTHER INFORMATION CONTACT: Nicholas Czajkowski or Robert Brown at 
(202) 482-1395 or (202) 482-3702, respectively, AD/CVD Operations, 
Enforcement and Compliance, International Trade Administration, U.S. 
Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 
20230.

SUPPLEMENTARY INFORMATION: 

The Petition

    On September 20, 2018, the U.S. Department of Commerce (Commerce) 
received a countervailing duty petition (CVD Petition) concerning 
imports of refillable stainless steel kegs (kegs) from the People's 
Republic of China (China), filed in proper form on behalf of the 
American Keg Company LLC (the petitioner), a domestic producer of 
kegs.\1\ The CVD Petition was accompanied by antidumping duty (AD) 
petitions concerning imports of kegs from China, Germany, and Mexico.
---------------------------------------------------------------------------

    \1\ See the petitioner's letter, ``Petitions for the Imposition 
of Antidumping Duties on Imports of Refillable Stainless Steel Kegs 
from Germany, Mexico, and the People's Republic Of China and 
Countervailing Duties on Imports of Refillable Stainless Steel Kegs 
from the People's Republic Of China,'' dated September 20, 2018 (the 
Petition).
---------------------------------------------------------------------------

    On September 25, 2018, Commerce requested supplemental information 
pertaining to certain aspects of the Petition in two separate 
supplemental questionnaires, one addressing the programs alleged as 
countervailable subsidies, and one primarily addressing scope 
clarification issues.\2\ The petitioner filed additional information on 
September 27, 2018.\3\
---------------------------------------------------------------------------

    \2\ See Commerce's Letters titled ``Petition for the Imposition 
of Countervailing Duties on Imports of Refillable Stainless Steel 
Kegs from the People's Republic of China: Supplemental Questions,'' 
and ``Petitions for the Imposition of Antidumping Duties on Imports 
of Refillable Stainless Steel Kegs from the People's Republic of 
China, the Federal Republic of Germany, and Mexico, and 
Countervailing Duty Imports from the People's Republic of China: 
Supplemental Questions,'' both dated September 25, 2018.
    \3\ See the petitioner's Letter, ``Supplement to the Petition 
for the Imposition of Countervailing Duties on Imports of Refillable 
Stainless Steel Kegs from China: Response to the Department's 
Supplemental Questions,'' dated September 27, 2018 (Supplement).
---------------------------------------------------------------------------

    In accordance with section 702(b)(1) of the Tariff Act of 1930, as 
amended (the Act), the petitioner alleges that the Government of China 
(GOC) is providing countervailable subsidies, within the meaning of 
sections 701 and 771(5) of the Act, to producers of kegs in China and 
that imports of such products are materially injuring, or threatening 
material injury to, the domestic kegs industry in the United States. 
Consistent with section 702(b)(1) of the Act and 19 CFR 351.202(b), for 
those alleged programs on which we are initiating a CVD investigation, 
the Petition is accompanied by information reasonably available to the 
petitioner supporting its allegations.
    Commerce finds that the petitioner filed the Petition on behalf of 
the domestic industry because the petitioner is an interested party as 
defined in section 771(9)(E) of the Act. Commerce also finds that the 
petitioner demonstrated sufficient industry support necessary for the 
initiation of the requested CVD investigation.\4\
---------------------------------------------------------------------------

    \4\ See the ``Determination of Industry Support for the 
Petition'' section, infra.
---------------------------------------------------------------------------

Period of Investigation

    Because the Petition was filed on September 20, 2018, the period of 
investigation is January 1, 2017, through December 31, 2017.

Scope of the Investigation

    The product covered by this investigation is kegs from China. For a 
full description of the scope of these investigations, see the Appendix 
to this notice.

Comments on the Scope of the Investigation

    During our review of the Petition, we contacted the petitioners 
regarding the proposed scope to ensure that the scope language in the 
Petitions is an accurate reflection of the products for which the 
domestic industry is seeking relief.\5\ As a result, the scope of the 
Petitions was modified to clarify the description of merchandise 
covered by the Petitions. The description of the merchandise covered by 
these investigations, as described in the Appendix to this notice, 
reflects these clarifications.
---------------------------------------------------------------------------

    \5\ See Supplement at ``General Issues Questionnaire'' section 
(General Issues Supplement) at 1-9; see also Revised Scope, at 
Exhibit 1.
---------------------------------------------------------------------------

    As discussed in the Preamble to Commerce's regulations, we are 
setting aside a period for interested parties to raise issues regarding 
product coverage (scope).\6\ Commerce will consider all comments 
received from interested parties and, if necessary, will consult with 
interested parties prior to the issuance of the preliminary 
determination. If scope comments include factual information,\7\ all 
such factual information should be limited to public information. To 
facilitate preparation of its questionnaires, Commerce requests that 
all interested parties submit such comments by 5:00 p.m. Eastern Time 
(ET) on October 30, 2018, which is 20 calendar days from the signature 
date of this notice. Any

[[Page 52193]]

rebuttal comments, which may include factual information, must be filed 
by 5:00 p.m. ET on November 9, 2018, which is 10 calendar days from the 
initial comments deadline.\8\
---------------------------------------------------------------------------

    \6\ See Antidumping Duties; Countervailing Duties, Final Rule, 
62 FR 27296, 27323 (May 19, 1997) (Preamble).
    \7\ See 19 CFR 351.102(b)(21) (defining ``factual 
information'').
    \8\ See 19 CFR 351.303(b).
---------------------------------------------------------------------------

    Commerce requests that any factual information parties consider 
relevant to the scope of the investigation be submitted during this 
period. However, if a party subsequently finds that additional factual 
information pertaining to the scope of the investigation may be 
relevant, the party may contact Commerce and request permission to 
submit the additional information. All such submissions must be filed 
on the records of the concurrent AD and CVD investigations.

Filing Requirements

    All submissions to Commerce must be filed electronically using 
Enforcement and Compliance's Antidumping Duty and Countervailing Duty 
Centralized Electronic Service System (ACCESS).\9\ An electronically 
filed document must be received successfully in its entirety by the 
time and date it is due. Documents exempted from the electronic 
submission requirements must be filed manually (i.e., in paper form) 
with Enforcement and Compliance's APO/Dockets Unit, Room 18022, U.S. 
Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 
20230, and stamped with the date and time of receipt by the applicable 
deadlines.
---------------------------------------------------------------------------

    \9\ See Antidumping and Countervailing Duty Proceedings: 
Electronic Filing Procedures; Administrative Protective Order 
Procedures, 76 FR 39263 (July 6, 2011). See also Enforcement and 
Compliance: Change of Electronic Filing System Name, 79 FR 69046 
(November 20, 2014) for details of Commerce's electronic filing 
requirements, which went into effect on August 5, 2011. Information 
on help using ACCESS can be found at https://access.trade.gov/help.aspx, and a handbook can be found at https://access.trade.gov/help/Handbook%20on%20Electronic%20Filling%20Procedures.pdf.
---------------------------------------------------------------------------

Consultations

    Pursuant to sections 702(b)(4)(A)(i) and (ii) of the Act, Commerce 
notified representatives of the GOC of the receipt of the Petition and 
provided them the opportunity for consultations with respect to the CVD 
Petition.\10\ The GOC did not request consultations.
---------------------------------------------------------------------------

    \10\ See Commerce's Letter, ``Countervailing Duty Petition on 
Refillable Stainless Steel Kegs from the People's Republic of 
China,'' dated September 21, 2018.
---------------------------------------------------------------------------

Determination of Industry Support for the Petition

    Section 702(b)(1) of the Act requires that a petition be filed on 
behalf of the domestic industry. Section 702(c)(4)(A) of the Act 
provides that a petition meets this requirement if the domestic 
producers or workers who support the petition account for: (i) At least 
25 percent of the total production of the domestic like product; and 
(ii) more than 50 percent of the production of the domestic like 
product produced by that portion of the industry expressing support 
for, or opposition to, the petition. Moreover, section 702(c)(4)(D) of 
the Act provides that, if the petition does not establish support of 
domestic producers or workers accounting for more than 50 percent of 
the total production of the domestic like product, Commerce shall: (i) 
Poll the industry or rely on other information in order to determine if 
there is support for the petition; or (ii) if there is a large number 
of producers in the domestic industry, determine industry support using 
any statistically valid sampling method to poll the ``industry.''
    Section 771(4)(A) of the Act defines the ``industry'' as the 
producers as a whole of a domestic like product. Thus, to determine 
whether a petition has the requisite industry support, the statute 
directs Commerce to look to producers and workers who produce the 
domestic like product. The International Trade Commission (ITC), which 
is responsible for determining whether ``the domestic industry'' has 
been injured, must also determine what constitutes a domestic like 
product in order to define the industry. While both Commerce and the 
ITC must apply the same statutory definition regarding the domestic 
like product,\11\ they do so for different purposes and pursuant to a 
separate and distinct authority. In addition, Commerce's determination 
is subject to limitations of time and information. Although this may 
result in different definitions of the like product, such differences 
do not render the decision of either agency contrary to law.\12\
---------------------------------------------------------------------------

    \11\ See section 771(10) of the Act.
    \12\ See USEC, Inc. v. United States, 132 F. Supp. 2d 1, 8 (CIT 
2001) (citing Algoma Steel Corp., Ltd. v. United States, 688 F. 
Supp. 639, 644 (CIT 1988), aff'd 865 F.2d 240 (Fed. Cir. 1989)).
---------------------------------------------------------------------------

    Section 771(10) of the Act defines the domestic like product as ``a 
product which is like, or in the absence of like, most similar in 
characteristics and uses with, the article subject to an investigation 
under this title.'' Thus, the reference point from which the domestic 
like product analysis begins is ``the article subject to an 
investigation'' (i.e., the class or kind of merchandise to be 
investigated, which normally will be the scope as defined in the 
petition).
    With regard to the domestic like product, the petitioner does not 
offer a definition of the domestic like product distinct from the scope 
of the investigation.\13\ Based on our analysis of the information 
submitted on the record, we have determined that kegs, as defined in 
the scope, constitute a single domestic like product, and we have 
analyzed industry support in terms of that domestic like product.\14\
---------------------------------------------------------------------------

    \13\ See Volume I of the Petition, at 33-36.
    \14\ For a discussion of the domestic like product analysis as 
applied to this case and information regarding industry support, see 
Countervailing Duty Investigation Initiation Checklist: Refillable 
Stainless Steel Kegs from the People's Republic of China (China CVD 
Initiation Checklist), at Attachment II, Analysis of Industry 
Support for the Antidumping and Countervailing Duty Petitions 
Covering Refillable Stainless Steel Kegs from the People's Republic 
of China, the Federal Republic of Germany, and Mexico (Attachment 
II). This checklist is dated concurrently with this notice and on 
file electronically via ACCESS. Access to documents filed via ACCESS 
is also available in the Central Records Unit, Room B8024 of the 
main Department of Commerce building.
---------------------------------------------------------------------------

    In determining whether the petitioner has standing under section 
702(c)(4)(A) of the Act, we considered the industry support data 
contained in the Petition with reference to the domestic like product 
as defined in the ``Scope of the Investigation,'' in the Appendix to 
this notice. To establish industry support, the petitioner provided its 
own production of the domestic like product in 2017.\15\ The petitioner 
states that there are no other known producers of kegs in the United 
States; therefore, the Petition is supported by 100 percent of the U.S. 
industry.\16\
---------------------------------------------------------------------------

    \15\ See Volume I of the Petition at 49 and 51.
    \16\ Id. at 5-6 and Exhibit GEN-10; see also General Issues 
Supplement, at 10-18 and Exhibit SUPP-GEN-6.
---------------------------------------------------------------------------

    Our review of the data provided in the Petition, the General Issues 
Supplement, and other information readily available to Commerce 
indicates that the petitioner has established industry support for the 
Petition.\17\ First, the Petition established support from domestic 
producers (or workers) accounting for more than 50 percent of the total 
production of the domestic like product and, as such, Commerce is not 
required to take further action in order to evaluate industry support 
(e.g., polling).\18\ Second, the domestic producers (or workers) have 
met the statutory criteria for industry support under section 
702(c)(4)(A)(i) of the Act because the domestic producers (or workers) 
who support the Petition account for at least 25 percent of the total 
production of the domestic like product.\19\ Finally, the domestic

[[Page 52194]]

producers (or workers) have met the statutory criteria for industry 
support under section 702(c)(4)(A)(ii) of the Act because the domestic 
producers (or workers) who support the Petition account for more than 
50 percent of the production of the domestic like product produced by 
that portion of the industry expressing support for, or opposition to, 
the Petition.\20\ Accordingly, Commerce determines that the Petition 
was filed on behalf of the domestic industry within the meaning of 
section 702(b)(1) of the Act.
---------------------------------------------------------------------------

    \17\ Id.
    \18\ Id.; see also section 702(c)(4)(D) of the Act.
    \19\ See China CVD Initiation Checklist, at Attachment II.
    \20\ Id.
---------------------------------------------------------------------------

    Commerce finds that the petitioner filed the Petition on behalf of 
the domestic industry because it is an interested party as defined in 
section 771(9)(C) of the Act, and it has demonstrated sufficient 
industry support with respect to the CVD investigation that it is 
requesting that Commerce initiate.\21\
---------------------------------------------------------------------------

    \21\ Id.
---------------------------------------------------------------------------

Injury Test

    Because China is a ``Subsidies Agreement Country'' within the 
meaning of section 701(b) of the Act, section 701(a)(2) of the Act 
applies to this investigation. Accordingly, the ITC must determine 
whether imports of the subject merchandise from China materially 
injure, or threaten material injury to, a U.S. industry.

Allegations and Evidence of Material Injury and Causation

    The petitioner alleges that imports of the subject merchandise are 
benefitting from countervailable subsidies and that such imports are 
causing, or threaten to cause, material injury to the U.S. industry 
producing the domestic like product. In addition, the petitioner 
alleges that subject imports exceed the negligibility threshold 
provided for under section 771(24)(A) of the Act.\22\
---------------------------------------------------------------------------

    \22\ See Volume I of the Petition, at 37-38.
---------------------------------------------------------------------------

    The petitioner contends that the industry's injured condition is 
illustrated by a significant volume of subject imports and an 
increasing share of subject imports relative to total imports; 
underselling and price depression or suppression; recent declines in 
production and capacity utilization; negative impact on the domestic 
industry's investment, cash flows, and inventories; decline in the 
domestic industry's financial performance; and lost sales and 
revenues.\23\ We have assessed the allegations and supporting evidence 
regarding material injury, threat of material injury, causation, as 
well as cumulation, and we have determined that these allegations are 
properly supported by adequate evidence, and meet the statutory 
requirements for initiation.\24\
---------------------------------------------------------------------------

    \23\ Id. at 23-33, 37-53, and Exhibit GEN-35; see also General 
Issues Supplement, at 18-33 and Exhibit SUPP GEN-7.
    \24\ See China CVD Initiation Checklist, at Attachment III, 
Analysis of Allegations and Evidence of Material Injury and 
Causation for the Antidumping and Countervailing Duty Petitions 
Covering Refillable Stainless Steel Kegs from the People's Republic 
of China, the Federal Republic of Germany, and Mexico (Attachment 
III).
---------------------------------------------------------------------------

Initiation of CVD Investigation

    Based on the examination of the Petition, we find that the Petition 
meets the requirements of section 702 of the Act. Therefore, we are 
initiating a CVD investigation to determine whether imports of kegs 
from China benefit from countervailable subsidies conferred by the GOC. 
In accordance with section 703(b)(1) of the Act and 19 CFR 
351.205(b)(1), unless postponed, we will make our preliminary 
determination no later than 65 days after the date of this initiation.
    Based on our review of the Petition, we find that there is 
sufficient information to initiate a CVD investigation on 21 of the 24 
subsidy programs alleged in the petition. For a full discussion of the 
basis for our decision to initiate or not on each program, see China 
CVD Initiation Checklist. A public version of the initiation checklist 
for this investigation is available on ACCESS.

Respondent Selection

    The petitioner named 26 producers/exporters as accounting for the 
majority of exports of kegs to the United States from China.\25\ In the 
event Commerce determines that the number of companies is large and it 
cannot individually examine each company based upon Commerce's 
resources, where appropriate, Commerce intends to select mandatory 
respondents based on quantity and value (Q&V) questionnaires issued to 
potential respondents. Commerce normally selects mandatory respondents 
in a CVD investigation using U.S. Customs and Border Protection (CBP) 
entry data. However, for this investigation, the Harmonized Tariff 
Schedule of the United States (HTSUS) numbers under which the subject 
merchandise would enter (7310.10.0010, 7310.10.0050, 7310.29.0025, and 
7310.29.0050) are basket categories containing a wide variety of 
manufactured steel products unrelated to kegs. We, therefore, cannot 
rely on CBP entry data in selecting respondents. We instead intend to 
issue Q&V questionnaires to each potential respondent, for which the 
petitioner has provided a complete address. Commerce will post the Q&V 
questionnaire along with the filing instructions on the Enforcement and 
Compliance website at https://trade.gov/enforcement/news.asp.
---------------------------------------------------------------------------

    \25\ See Volume I of the Petition at Exhibit GEN-23.
---------------------------------------------------------------------------

    Exporters and producers of kegs from China that do not receive Q&V 
questionnaires by mail may still submit a response to the Q&V 
questionnaire and can obtain a copy of the Q&V questionnaire from the 
Enforcement and Compliance website, at the URL given above. Responses 
to the Q&V questionnaire must be submitted by the relevant Chinese 
exporters/producers no later than 5:00 p.m. ET on October 24, 2018, 
which is two weeks from the signature date of this notice. All Q&V 
responses must be filed electronically via ACCESS. We intend to 
finalize our decisions regarding respondent selection within 20 days of 
publication of this notice.
    Interested parties must submit applications for disclosure under 
APO in accordance with 19 CFR 351.305(b). Instructions for filing such 
applications may be found on the Commerce's website at https://enforcement.trade.gov/apo.

Distribution of Copies of the Petition

    In accordance with section 702(b)(4)(A)(i) of the Act and 19 CFR 
351.202(f), copies of the public version of the Petition have been 
provided to the GOC via ACCESS. To the extent practicable, we will 
attempt to provide a copy of the public version of the Petition to each 
exporter named in the Petitions, as provided under 19 CFR 
351.203(c)(2).

ITC Notification

    We will notify the ITC of our initiation, as required by section 
702(d) of the Act.

Preliminary Determinations by the ITC

    The ITC will preliminarily determine, within 45 days after the date 
on which the Petition was filed, whether there is a reasonable 
indication that imports of kegs from China are materially injuring, or 
threatening material injury to, a U.S. industry.\26\ A negative ITC 
determination will result in the investigation being terminated.\27\ 
Otherwise, this investigation will proceed according to statutory and 
regulatory time limits.
---------------------------------------------------------------------------

    \26\ See section 703(a)(2) of the Act.
    \27\ See section 703(a)(1) of the Act.

---------------------------------------------------------------------------

[[Page 52195]]

Submission of Factual Information

    Factual information is defined in 19 CFR 351.102(b)(21) as: (i) 
Evidence submitted in response to questionnaires; (ii) evidence 
submitted in support of allegations; (iii) publicly available 
information to value factors under 19 CFR 351.408(c) or to measure the 
adequacy of remuneration under 19 CFR 351.511(a)(2); (iv) evidence 
placed on the record by Commerce; and (v) evidence other than factual 
information described in (i)-(iv). 19 CFR 351.301(b) requires any 
party, when submitting factual information, to specify under which 
subsection of 19 CFR 351.102(b)(21) the information is being submitted 
\28\ and, if the information is submitted to rebut, clarify, or correct 
factual information already on the record, to provide an explanation 
identifying the information already on the record that the factual 
information seeks to rebut, clarify, or correct.\29\ Time limits for 
the submission of factual information are addressed in 19 CFR 351.301, 
which provides specific time limits based on the type of factual 
information being submitted. Interested parties should review the 
regulations prior to submitting factual information in these 
investigations.
---------------------------------------------------------------------------

    \28\ See 19 CFR 351.301(b).
    \29\ See 19 CFR 351.301(b)(2).
---------------------------------------------------------------------------

Extensions of Time Limits

    Parties may request an extension of time limits before the 
expiration of a time limit established under 19 CFR 351.301, or as 
otherwise specified by the Secretary. In general, an extension request 
will be considered untimely if it is filed after the expiration of the 
time limit established under 19 CFR 351.301. For submissions that are 
due from multiple parties simultaneously, an extension request will be 
considered untimely if it is filed after 10:00 a.m. ET on the due date. 
Under certain circumstances, we may elect to specify a different time 
limit by which extension requests will be considered untimely for 
submissions which are due from multiple parties simultaneously. In such 
a case, we will inform parties in the letter or memorandum setting 
forth the deadline (including a specified time) by which extension 
requests must be filed to be considered timely. An extension request 
must be made in a separate, stand-alone submission; under limited 
circumstances we will grant untimely-filed requests for the extension 
of time limits. Parties should review Extension of Time Limits; Final 
Rule, 78 FR 57790 (September 20, 2013), available at https://www.gpo.gov/fdsys/pkg/FR-2013-09-20/html/2013-22853.htm, prior to 
submitting factual information in these investigations.

Certification Requirements

    Any party submitting factual information in an AD or CVD proceeding 
must certify to the accuracy and completeness of that information.\30\ 
Parties must use the certification formats provided in 19 CFR 
351.303(g).\31\ Commerce intends to reject factual submissions if the 
submitting party does not comply with the applicable certification 
requirements.
---------------------------------------------------------------------------

    \30\ See section 782(b) of the Act.
    \31\ See Certification of Factual Information to Import 
Administration During Antidumping and Countervailing Duty 
Proceedings, 78 FR 42678 (July 17, 2013) (``Final Rule''); see also 
frequently asked questions regarding the Final Rule, available at 
https://enforcement.trade.gov/tlei/notices/factual_info_final_rule_FAQ_07172013.pdf.
---------------------------------------------------------------------------

Notification to Interested Parties

    Interested parties must submit applications for disclosure under 
APO in accordance with 19 CFR 351.305. On January 22, 2008, Commerce 
published Antidumping and Countervailing Duty Proceedings: Documents 
Submission Procedures; APO Procedures, 73 FR 3634 (January 22, 2008). 
Parties wishing to participate in this investigation should ensure that 
they meet the requirements of these procedures (e.g., the filing of 
letters of appearance as discussed at 19 CFR 351.103(d)).
    This notice is issued and published pursuant to sections 702 and 
777(i) of the Act and 19 CFR 351.203(c).

    Dated: October 10, 2018.
Gary Taverman,
Deputy Assistant Secretary for Antidumping and Countervailing Duty 
Operations, performing the non-exclusive functions and duties of the 
Assistant Secretary for Enforcement and Compliance.

Appendix

Scope of the Investigation

    The merchandise covered by this investigation are kegs, vessels, 
or containers that are approximately cylindrical in shape, made from 
stainless steel (i.e., steel containing at least 10.5 percent 
chromium by weight and less than 1.2 percent carbon by weight, with 
or without other elements), and that are compatible with a ``D 
Sankey'' extractor (commonly known as a ``D Coupler'' or ``Sankey'') 
(refillable stainless steel kegs) with a nominal liquid volume 
capacity of 10 liters or more, regardless of the type of finish, 
gauge, thickness, or grade of stainless steel, and whether or not 
covered by or encased in other materials. Refillable stainless steel 
kegs may be imported assembled or unassembled, with or without all 
components (including spears, couplers or taps, necks, collars, and 
valves), and be filled or unfilled.
    ``Unassembled'' or ``unfinished'' refillable stainless steel 
kegs include drawn stainless steel cylinders that have been welded 
to form the body of the keg and welded to an upper (top) chime and/
or lower (bottom) chime. Unassembled refillable stainless steel kegs 
may or may not be welded to a neck, may or may not have a valve 
assembly attached, and may be otherwise complete except for testing, 
certification, and/or marking.
    Subject merchandise also includes refillable stainless steel 
kegs that have been further processed in a third country, including 
but not limited to, attachment of necks, collars, spears or valves, 
heat treatment, pickling, passivation, painting, testing, 
certification or any other processing that would not otherwise 
remove the merchandise from the scope of the investigation if 
performed in the country of manufacture of the in-scope refillable 
stainless steel keg.
    Specifically excluded are the following:
    (1) Vessels or containers that are not approximately cylindrical 
in nature (e.g., box, ``hopper'' or ``cone'' shaped vessels);
    (2) stainless steel kegs, vessels, or containers that have 
either a ``ball lock'' valve system or a ``pin lock'' valve system 
(commonly known as ``Cornelius,'' ``corny'' or ``ball lock'' kegs);
    (3) necks, spears, couplers or taps, collars, and valves that 
are not imported with the subject merchandise; and
    (4) stainless steel kegs that are filled with beer, wine, or 
other liquid and that are designated by the Commissioner of Customs 
as Instruments of International Traffic within the meaning of 
section 332(a) of the Tariff Act of 1930, as amended.
    The merchandise covered by this investigation are currently 
classified in the Harmonized Tariff Schedule of the United States 
(HTSUS) under subheadings 7310.10.0010, 7310.00.0050, 7310.29.0025, 
and 7310.29.0050.
    These HTSUS subheadings are provided for convenience and customs 
purposes; the written description of the scope of this investigation 
is dispositive.

[FR Doc. 2018-22483 Filed 10-15-18; 8:45 am]
 BILLING CODE 3510-DS-P