Polyethylene Terephthalate Resin From Pakistan: Final Determination of Sales at Less Than Fair Value, 48281-48283 [2018-20722]
Download as PDF
Federal Register / Vol. 83, No. 185 / Monday, September 24, 2018 / Notices
fittings from Taiwan.4 Therefore, in
accordance with section 735(c)(2) of the
Act, we are issuing this antidumping
duty order. Because the ITC determined
that imports of forged steel fittings from
Taiwan are materially injuring a U.S.
industry, unliquidated entries of such
merchandise from Taiwan entered, or
withdrawn from warehouse for
consumption, are subject to the
assessment of antidumping duties.
Therefore, in accordance with section
736(a)(1) of the Act, Commerce will
direct U.S. Customs and Border
Protection (CBP) to assess, upon further
instruction by Commerce, antidumping
duties equal to the amount by which the
normal value of the merchandise
exceeds the export price (or constructed
export price) of the merchandise, for all
relevant entries of forged steel fittings
from Taiwan. Antidumping duties will
be assessed on unliquidated entries of
forged steel fittings from Taiwan
entered, or withdrawn from warehouse
for consumption, on or after May 17,
2018, the date of publication of the
Preliminary Determination.5
amozie on DSK3GDR082PROD with NOTICES1
Continuation of Suspension of
Liquidation
In accordance with section
735(c)(1)(B) of the Act, we will instruct
CBP to continue to suspend liquidation
on all relevant entries of forged steel
fittings from Taiwan. These instructions
suspending liquidation will remain in
effect until further notice.
We will also instruct CBP to require
cash deposits equal to the amounts as
indicated below. Accordingly, effective
on the date of publication of the ITC’s
final affirmative injury determination,
CBP will require, at the same time as
importers would normally deposit
estimated duties on this subject
merchandise, a cash deposit equal to the
estimated weighted-average dumping
margins listed below.6 The relevant allothers rate applies to all producers or
exporters not specifically listed.
Provisional Measures
Section 733(d) of the Act states that
instructions issued pursuant to an
affirmative preliminary determination
may not remain in effect for more than
four months except where exporters
representing a significant proportion of
exports of the subject merchandise
request Commerce to extend that fourmonth period to no more than six
months. However, Commerce did not
extend the four-month period in the
underlying investigation. In the
underlying investigation, Commerce
published the Preliminary
Determination on May 17, 2018. Thus,
the four-month period beginning on the
date of the publication of the
Preliminary Determination ended on
September 13, 2018. Furthermore,
section 737(b) of the Act states that
definitive duties are to begin on the date
of publication of the ITC’s final injury
determination.
Therefore, in accordance with section
733(d) of the Act and our practice, we
will instruct CBP to terminate the
suspension of liquidation and to
liquidate, without regard to
antidumping duties, unliquidated
entries of forged steel fittings from
Taiwan entered, or withdrawn from
warehouse for consumption, on or after
September 14, 2018, the date the
provisional measures expired, and
through the day preceding the date of
publication of the ITC’s final injury
determination in the Federal Register.
Estimated Dumping Margins
Commerce determines that the
estimated final weighted-average
dumping margins are as follows:
Exporter/producer
ITC Notification.
5 See Forged Steel Fittings from Taiwan:
Affirmative Preliminary Determination of Sales at
Less Than Fair Value, 83 FR 22957 (May 17, 2018)
(Preliminary Determination).
6 See section 736(a)(3) of the Act.
VerDate Sep<11>2014
17:40 Sep 21, 2018
Jkt 244001
[A–535–905]
Polyethylene Terephthalate Resin
From Pakistan: Final Determination of
Sales at Less Than Fair Value
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce
(Commerce) determines that imports of
polyethylene terephthalate (PET) resin
from Pakistan are being sold in the
United States at less than fair value
(LTFV), as provided in section 735 of
the Tariff Act of 1930, as amended (the
Act).
DATES: Applicable September 24, 2018.
FOR FURTHER INFORMATION CONTACT:
Mark Hoadley or Lauren Caserta, AD/
CVD Operations, Office VII,
Enforcement and Compliance,
International Trade Administration,
U.S. Department of Commerce, 1401
Constitution Avenue NW, Washington,
DC 20230; telephone: (202) 482–3148 or
(202) 482–4737, respectively.
SUPPLEMENTARY INFORMATION:
AGENCY:
On May 4, 2018, Commerce published
in the Federal Register the preliminary
determination of sales at LTFV in the
antidumping duty (AD) investigation of
PET resin from Pakistan.1 Commerce
invited comments from interested
116.17 parties on the Preliminary
116.17 Determination.2 The petitioners 3 and
116.17 Novatex Limited (Novatex) filed case
and rebuttal briefs.4 A summary of the
Notification to Interested Parties
This notice constitutes the
antidumping duty order with respect to
forged steel fittings from Taiwan
pursuant to section 736(a) of the Act.
Interested parties can find a list of
antidumping duty orders currently in
effect at https://enforcement.trade.gov/
stats/iastats1.html.
This order is published in accordance
with section 736(a) of the Act and 19
CFR 351.211(b).
Dated: September 19, 2018.
Christian Marsh,
Deputy Assistant Secretary for Enforcement
and Compliance.
PO 00000
International Trade Administration
Weightedaverage
dumping
margins
(percent)
Both Well Steel Fittings Co., Ltd
Luchu Shin Yee Works Co., Ltd
All-Others ....................................
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Background
[FR Doc. 2018–20797 Filed 9–21–18; 8:45 am]
4 See
48281
1 See Polyethylene Terephthalate Resin from
Pakistan: Preliminary Determination of Sales at
Less Than Fair Value, Postponement of Final
Determination, and Extension of Provisional
Measures, 83 FR 19689 (May 4, 2018) (Preliminary
Determination) and accompanying Preliminary
Decision Memorandum (PDM).
2 See Memorandum, ‘‘Antidumping Duty
Investigation of Polyethylene Terephthalate Resin
from Pakistan: Schedule for Submission of Case and
Rebuttal Briefs,’’ dated June 14, 2018 (Case Brief
Schedule); see also Memorandum, ‘‘Antidumping
Duty Investigation of Polyethylene Terephthalate
Resin from Pakistan: Revised Schedule for
Submission of Case and Rebuttal Briefs,’’ dated June
19, 2018 (Revised Case Brief Schedule).
3 DAK Americas, LLC Indorama Ventures USA,
Ind., M&G Polymers USA, LLC, and Nan Ya Plastics
Corporation, America (collectively, the petitioners).
4 See Petitioners’ Case Brief, ‘‘Polyethylene
Terephthalate Resin from Pakistan: Petitioners’ Case
Brief for Novatex Limited,’’ dated June 22, 2018
(Petitioners’ Case Brief), and Novatex’s Case Brief,
‘‘Polyethylene Terephthalate Resin from Pakistan:
Novatex’s Case Brief,’’ dated June 25, 2018
(Novatex’s Case Brief); see also Petitioners’ Rebuttal
Brief, ‘‘Polyethylene Terephthalate Resin from
Pakistan: Petitioners’ Rebuttal Brief for Novatex,’’
Continued
Frm 00008
Fmt 4703
Sfmt 4703
E:\FR\FM\24SEN1.SGM
24SEN1
48282
Federal Register / Vol. 83, No. 185 / Monday, September 24, 2018 / Notices
events that occurred since Commerce
published the Preliminary
Determination, as well as a full
discussion of the issues raised by
interested parties for this final
determination, may be found in the
Issues and Decision Memorandum.5 The
Issues and Decision Memorandum is a
public document and is on file
electronically via Enforcement and
Compliance’s Antidumping and
Countervailing Duty Centralized
Electronic Service System (ACCESS).
ACCESS is available to registered users
at https://access.trade.gov, and it is
available to all parties in the Central
Records Unit, Room B8024 of the main
Commerce building. In addition, a
complete version of the Issues and
Decision Memorandum can be accessed
directly at https://enforcement.trade.gov/
frn/. The signed and electronic versions
of the Issues and Decision
Memorandum are identical in content.
Scope of the Investigation
The product covered by this
investigation is polyethylene
terephthalate (PET) resin from Pakistan.
Commerce did not receive any scope
comments subsequent to the
Preliminary Determination and,
therefore, the scope has not been
updated since the Preliminary
Determination. See the scope in
Appendix I to this notice.
Period of Investigation
The POI is July 1, 2016, through June
30, 2017.
amozie on DSK3GDR082PROD with NOTICES1
Verification
As provided in section 782(i) of the
Act, we conducted the sales verification
in Washington, DC, between May 7,
2018, and May 11, 2018.6 We used
standard verification procedures,
including an examination of relevant
dated July 6, 2018 (Petitioners’ Rebuttal Brief) and
Novatex’s Rebuttal Brief, ‘‘Polyethylene
Terephthalate Resin from Pakistan: Novatex’s
Rebuttal Brief,’’ dated July 6, 2018 (Novatex’s
Rebuttal Brief).
5 See Memorandum, ‘‘Issues and Decision
Memorandum for the Final Affirmative
Determination in the Antidumping Duty
Investigation of Polyethylene Terephthalate Resin
from Pakistan,’’ dated concurrently with, and
hereby adopted by, this notice (Issues and Decision
Memorandum (IDM)).
6 In accordance with the timely travel advisory
issued by the U.S. Department of State discouraging
travel within Pakistan, and following consultations
with U.S. Embassy personnel in Islamabad,
Commerce determined that Novatex’s sales
verification would be held at an alternate location
in Washington, DC. This determination was made
after receiving confirmation from the respondent
that necessary company personnel would be in
attendance, sufficient physical documentation
would be shipped to the alternate site, and that
Commerce would be provided with adequate
remote access to Novatex’s electronic systems.
VerDate Sep<11>2014
17:40 Sep 21, 2018
Jkt 244001
accounting and production records, and
original source documents provided by
the respondents. Commerce determined
that the cost databases provided by
Novatex were unusable and cancelled
the cost verification associated with this
investigation on June 13, 2018.7
otherwise available. Accordingly, we
will use any reasonable method to
establish the estimated all-others rate.
Commerce’s practice, in such situations,
is to base the all-others rate on an
average of the petition rates.8 We
followed that practice here.
Analysis of Comments Received
All issues raised in the case and
rebuttal briefs by parties in this
investigation are addressed in the Issues
and Decision Memorandum, which is
hereby adopted by this notice. A list of
the issues raised is attached to this
notice as Appendix II.
Final Determination Margins
Use of Facts Available and Adverse
Facts Available
For purposes of this final
determination, Commerce relied on
facts available with adverse inferences
when calculating the margin for
Novatex Limited pursuant to sections
776(a)(1), 776(a)(2)(B)–(C) and 776(b) of
the Act. For further information, see the
Issues and Decision Memorandum.
Changes Since the Preliminary
Determination
Based on our analysis of the
comments received and our findings at
verification, we made certain changes to
the margin calculations. For a
discussion of these changes, see the
Issues and Decision Memorandum.
All-Others Rate
Sections 735(c)(1)(B)(i)(II) and
735(c)(5)(A) of the Act provide that
Commerce shall determine an estimated
all-others rate for all exporters and
producers not individually examined.
This rate shall be an amount equal to
the weighted average of the estimated
weighted-average dumping margins
established for exporters and producers
individually investigated, excluding any
zero and de minimis margins, and any
margins determined entirely under
section 776 of the Act. However, when
the estimated weighted-average
dumping margins for all exporters and
producers individually investigated are
zero or de minimis, or determined
entirely under section 776 of the Act,
Commerce shall use any reasonable
method to establish the all-others rate,
including averaging the estimated
weighted-average dumping margins for
the exporters and producers
individually investigated.
In this investigation, Commerce based
Novatex’s rate entirely on facts
7 See Commerce’s Letter, ‘‘Cancellation of Cost
Verification in the Antidumping Duty Investigation
of Polyethylene Terephthalate (PET) Resin from
Pakistan,’’ dated June 13, 2018 (Cost Verification
Cancellation Letter).
PO 00000
Frm 00009
Fmt 4703
Sfmt 4703
Commerce determines that the
following estimated weighted-average
dumping margins exist:
Exporter/producer
Novatex Limited 9 ........................
All-Others ....................................
Estimated
weightedaverage
dumping
margin
(percent)
59.92
43.81
Disclosure
We will disclose any calculations
performed within five days of any
public announcement of this notice in
accordance with 19 CFR 351.224(b).
Continuation of Suspension of
Liquidation
In accordance with section
735(c)(1)(B) of the Act, Commerce will
instruct U.S. Customs and Border
Protection (CBP) to continue to suspend
liquidation of all appropriate entries of
PET resin from Pakistan, as described in
Appendix I of this notice, which were
entered, or withdrawn from warehouse,
for consumption on or after May 4,
2018, the date of publication of the
Preliminary Determination.
Furthermore, pursuant to section
735(c)(1)(B)(ii) of the Act and 19 CFR
351.210(d), Commerce will instruct CBP
to require a cash deposit for such entries
of merchandise equal to the estimated
weighted-average dumping margin or
the estimated all-others rate, as follows:
8 See, e.g., Notice of Preliminary Determination of
Sales at Less Than Fair Value: Sodium Nitrite from
the Federal Republic of Germany, 73 FR 21909,
21912 (April 23, 2008), unchanged in Notice of
Final Determination of Sales at Less Than Fair
Value: Sodium Nitrite from the Federal Republic of
Germany, 73 FR 38986, 38987 (July 8, 2008), and
accompanying Issues and Decision Memorandum at
Comment 2; see also Notice of Final Determination
of Sales at Less Than Fair Value: Raw Flexible
Magnets from Taiwan, 73 FR 39673, 39674 (July 10,
2008); Steel Threaded Rod from Thailand:
Preliminary Determination of Sales at Less Than
Fair Value and Affirmative Preliminary
Determination of Critical Circumstances, 78 FR
79670, 79671 (December 31, 2013), unchanged in
Steel Threaded Rod from Thailand: Final
Determination of Sales at Less Than Fair Value and
Affirmative Final Determination of Critical
Circumstances, 79 FR 14476, 14477 (March 14,
2014), 82 FR 47697, 47698.
9 Commerce has determined that Novatex Limited
and Gatron Industries Limited are a single entity.
See Issues and Decision Memorandum.
E:\FR\FM\24SEN1.SGM
24SEN1
Federal Register / Vol. 83, No. 185 / Monday, September 24, 2018 / Notices
(1) The cash deposit rate for the
respondent listed above will be equal to
the respondent-specific estimated
weighted-average dumping margin
determined in this final determination;
(2) if the exporter is not a respondent
identified above but the producer is,
then the cash deposit rate will be equal
to the respondent-specific estimated
weighted-average dumping margin
established for that producer of the
subject merchandise; and (3) the cash
deposit rate for all other producers and
exporters will be equal to the all-others
estimated weighted-average dumping
margin.
amozie on DSK3GDR082PROD with NOTICES1
International Trade Commission
Notification
In accordance with section 735(d) of
the Act, we will notify the U.S.
International Trade Commission (ITC) of
the final affirmative determination of
sales at LTFV. Because the final
determination in this proceeding is
affirmative, in accordance with section
735(b)(2)(B) of the Act, the ITC will
make its final determination as to
whether the domestic industry in the
United States is materially injured, or
threatened with material injury, by
reason of imports of PET resin no later
than 45 days after our final
determination. If the ITC determines
that material injury or threat of material
injury does not exist, the proceeding
will be terminated and all cash deposits
will be refunded. If the ITC determines
that such injury does exist, Commerce
will issue an antidumping duty order
directing CBP to assess, upon further
instruction by Commerce, antidumping
duties on all imports of the subject
merchandise entered, or withdrawn
from warehouse, for consumption on or
after the effective date of the suspension
of liquidation, as discussed above in the
‘‘Continuation of Suspension of
Liquidation’’ section.
Notification Regarding Administrative
Protective Orders
This notice will serve as the only
reminder to parties, subject to
administrative protective order (APO),
of their responsibility concerning the
destruction of proprietary information
disclosed under APO in accordance
with 19 CFR 351.305(a)(3). Timely
written notification of return/
destruction or APO materials or
conversion to judicial protective order is
hereby requested. Failure to comply
with the regulations and the terms of an
APO is a sanctionable violation.
Notification to Interested Parties
We are issuing and publishing this
determination and notice in accordance
VerDate Sep<11>2014
17:40 Sep 21, 2018
Jkt 244001
with sections 735(d) and 777(i) of the
Act and 19 CFR 351.210(c).
Dated: September 17, 2018.
Gary Taverman,
Deputy Assistant Secretary for Antidumping
and Countervailing Duty Operations,
performing the non-exclusive functions and
duties of the Assistant Secretary for
Enforcement and Compliance.
Appendix I
Scope of the Investigation
The merchandise covered by this
investigation is polyethylene terephthalate
(PET) resin having an intrinsic viscosity of at
least 70, but not more than 88, milliliters per
gram (0.70 to 0.88 deciliters per gram). The
scope includes blends of virgin PET resin
and recycled PET resin containing 50 percent
or more virgin PET resin content by weight,
provided such blends meet the intrinsic
viscosity requirements above. The scope
includes all PET resin meeting the above
specifications regardless of additives
introduced in the manufacturing process.
The scope excludes PET-glycol resin, also
referred to as PETG. PET-glycol resins are
manufactured by replacing a portion of the
raw material input monoethylene glycol
(MEG) with one of five glycol modifiers:
Cyclohexanedimethanol (CHDM), diethylene
glycol (DEG), neopentyl glycol (NPG),
isosorbide, or spiro glycol. Specifically,
excluded PET-glycol resins must contain a
minimum of 10 percent, by weight, of CHDM,
DEG, NPG, isosorbide or spiro glycol, or
some combination of these glycol modifiers.
Unlike subject PET resin, PET-glycol resins
are amorphous resins that are not solid-stated
and cannot be crystallized or recycled.
The merchandise subject to this
investigation is properly classified under
subheadings 3907.61.0000 and 3907.69.0000
of the Harmonized Tariff Schedule of the
United States (HTSUS). Although the HTSUS
subheadings are provided for convenience
and customs purposes, the written
description of the merchandise covered by
this investigation is dispositive.
Appendix II
List of Topics Discussed in the Issues and
Decision Memorandum
I. Summary
II. Background
III. Scope of the Investigation
IV. Changes Since the Preliminary
Determination
V. Use of Facts Otherwise Available and
Adverse Inferences
VI. Discussion of the Issues
Comment 1: Whether Commerce Should
Verify Novatex’s Reported Costs
Comment 2: Whether Commerce Should
Apply Adverse Facts Available to
Novatex
Comment 3: Whether Commerce is
Justified in Denying Novatex a Duty
Drawback Adjustment in Its Final
Determination
VII. Recommendation
[FR Doc. 2018–20722 Filed 9–21–18; 8:45 am]
DEPARTMENT OF COMMERCE
International Trade Administration
[A–580–896]
Polyethylene Terephthalate Resin
From the Republic of Korea:
Affirmative Final Determination of
Sales at Less Than Fair Value and
Final Affirmative Determination of
Critical Circumstances, in Part
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce
(Commerce) determines that imports of
polyethylene terephthalate (PET) resin
from the Republic of Korea are being
sold in the United States at less than fair
value (LTFV), as provided in section
735 of the Tariff Act of 1930, as
amended (the Act).
DATES: Applicable September 24, 2018.
FOR FURTHER INFORMATION CONTACT:
Sean Carey or Mark Hoadley, AD/CVD
Operations, Office VII, Enforcement and
Compliance, International Trade
Administration, U.S. Department of
Commerce, 1401 Constitution Avenue
NW, Washington, DC 20230; telephone:
(202) 482–3964 or (202) 482–3148,
respectively.
AGENCY:
SUPPLEMENTARY INFORMATION:
Background
On May 4, 2018, Commerce published
in the Federal Register the preliminary
determination of sales at LTFV in the
antidumping duty (AD) investigation of
PET resin from the Republic of Korea.1
Commerce invited comments from
interested parties on the Preliminary
Determination.2 The petitioners 3 and
SK Chemicals Co., Ltd. (SK Chemicals)
filed case and rebuttal briefs.4 A
1 See Polyethylene Terephthalate Resin from the
Republic of Korea: Preliminary Determination of
Sales at Less Than Fair Value, Postponement of
Final Determination, and Extension of Provisional
Measures, 83 FR 19694 (May 4, 2018) (Preliminary
Determination) and accompanying Preliminary
Decision Memorandum (PDM).
2 Id. at 19694; see also Memorandum, ‘‘Briefing
Schedule in the Antidumping Duty Investigation of
Polyethylene Terephthalate Resin from the
Republic of Korea,’’ dated August 10, 2018.
3 DAK Americas, LLC Indorama Ventures USA,
Ind., M&G Polymers USA, LLC, and Nan Ya Plastics
Corporation, America (collectively, the petitioners).
4 See Petitioners’ submission, ‘‘Polyethylene
Terephthalate Resin from South Korea; Petitioners’
Case Brief’’ dated August 17, 2018 (Petitioners’ Case
Brief); also SK Chemicals’ submission,
‘‘Polyethylene Terephthalate Resin from the
Republic of Korea, Case Brief of SK Chemicals,’’
dated August 17, 2018 (SK Chemicals’ Case Brief);
also Petitioners’ submission, ‘‘Polyethylene
Terephthalate Resin from South Korea; Petitioners’
Rebuttal Brief’’ dated August 22, 2018 (Petitioners’
Continued
BILLING CODE 3510–DS–P
PO 00000
Frm 00010
Fmt 4703
48283
Sfmt 4703
E:\FR\FM\24SEN1.SGM
24SEN1
Agencies
[Federal Register Volume 83, Number 185 (Monday, September 24, 2018)]
[Notices]
[Pages 48281-48283]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-20722]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
[A-535-905]
Polyethylene Terephthalate Resin From Pakistan: Final
Determination of Sales at Less Than Fair Value
AGENCY: Enforcement and Compliance, International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce (Commerce) determines that imports
of polyethylene terephthalate (PET) resin from Pakistan are being sold
in the United States at less than fair value (LTFV), as provided in
section 735 of the Tariff Act of 1930, as amended (the Act).
DATES: Applicable September 24, 2018.
FOR FURTHER INFORMATION CONTACT: Mark Hoadley or Lauren Caserta, AD/CVD
Operations, Office VII, Enforcement and Compliance, International Trade
Administration, U.S. Department of Commerce, 1401 Constitution Avenue
NW, Washington, DC 20230; telephone: (202) 482-3148 or (202) 482-4737,
respectively.
SUPPLEMENTARY INFORMATION:
Background
On May 4, 2018, Commerce published in the Federal Register the
preliminary determination of sales at LTFV in the antidumping duty (AD)
investigation of PET resin from Pakistan.\1\ Commerce invited comments
from interested parties on the Preliminary Determination.\2\ The
petitioners \3\ and Novatex Limited (Novatex) filed case and rebuttal
briefs.\4\ A summary of the
[[Page 48282]]
events that occurred since Commerce published the Preliminary
Determination, as well as a full discussion of the issues raised by
interested parties for this final determination, may be found in the
Issues and Decision Memorandum.\5\ The Issues and Decision Memorandum
is a public document and is on file electronically via Enforcement and
Compliance's Antidumping and Countervailing Duty Centralized Electronic
Service System (ACCESS). ACCESS is available to registered users at
https://access.trade.gov, and it is available to all parties in the
Central Records Unit, Room B8024 of the main Commerce building. In
addition, a complete version of the Issues and Decision Memorandum can
be accessed directly at https://enforcement.trade.gov/frn/. The signed
and electronic versions of the Issues and Decision Memorandum are
identical in content.
---------------------------------------------------------------------------
\1\ See Polyethylene Terephthalate Resin from Pakistan:
Preliminary Determination of Sales at Less Than Fair Value,
Postponement of Final Determination, and Extension of Provisional
Measures, 83 FR 19689 (May 4, 2018) (Preliminary Determination) and
accompanying Preliminary Decision Memorandum (PDM).
\2\ See Memorandum, ``Antidumping Duty Investigation of
Polyethylene Terephthalate Resin from Pakistan: Schedule for
Submission of Case and Rebuttal Briefs,'' dated June 14, 2018 (Case
Brief Schedule); see also Memorandum, ``Antidumping Duty
Investigation of Polyethylene Terephthalate Resin from Pakistan:
Revised Schedule for Submission of Case and Rebuttal Briefs,'' dated
June 19, 2018 (Revised Case Brief Schedule).
\3\ DAK Americas, LLC Indorama Ventures USA, Ind., M&G Polymers
USA, LLC, and Nan Ya Plastics Corporation, America (collectively,
the petitioners).
\4\ See Petitioners' Case Brief, ``Polyethylene Terephthalate
Resin from Pakistan: Petitioners' Case Brief for Novatex Limited,''
dated June 22, 2018 (Petitioners' Case Brief), and Novatex's Case
Brief, ``Polyethylene Terephthalate Resin from Pakistan: Novatex's
Case Brief,'' dated June 25, 2018 (Novatex's Case Brief); see also
Petitioners' Rebuttal Brief, ``Polyethylene Terephthalate Resin from
Pakistan: Petitioners' Rebuttal Brief for Novatex,'' dated July 6,
2018 (Petitioners' Rebuttal Brief) and Novatex's Rebuttal Brief,
``Polyethylene Terephthalate Resin from Pakistan: Novatex's Rebuttal
Brief,'' dated July 6, 2018 (Novatex's Rebuttal Brief).
\5\ See Memorandum, ``Issues and Decision Memorandum for the
Final Affirmative Determination in the Antidumping Duty
Investigation of Polyethylene Terephthalate Resin from Pakistan,''
dated concurrently with, and hereby adopted by, this notice (Issues
and Decision Memorandum (IDM)).
---------------------------------------------------------------------------
Scope of the Investigation
The product covered by this investigation is polyethylene
terephthalate (PET) resin from Pakistan. Commerce did not receive any
scope comments subsequent to the Preliminary Determination and,
therefore, the scope has not been updated since the Preliminary
Determination. See the scope in Appendix I to this notice.
Period of Investigation
The POI is July 1, 2016, through June 30, 2017.
Verification
As provided in section 782(i) of the Act, we conducted the sales
verification in Washington, DC, between May 7, 2018, and May 11,
2018.\6\ We used standard verification procedures, including an
examination of relevant accounting and production records, and original
source documents provided by the respondents. Commerce determined that
the cost databases provided by Novatex were unusable and cancelled the
cost verification associated with this investigation on June 13,
2018.\7\
---------------------------------------------------------------------------
\6\ In accordance with the timely travel advisory issued by the
U.S. Department of State discouraging travel within Pakistan, and
following consultations with U.S. Embassy personnel in Islamabad,
Commerce determined that Novatex's sales verification would be held
at an alternate location in Washington, DC. This determination was
made after receiving confirmation from the respondent that necessary
company personnel would be in attendance, sufficient physical
documentation would be shipped to the alternate site, and that
Commerce would be provided with adequate remote access to Novatex's
electronic systems.
\7\ See Commerce's Letter, ``Cancellation of Cost Verification
in the Antidumping Duty Investigation of Polyethylene Terephthalate
(PET) Resin from Pakistan,'' dated June 13, 2018 (Cost Verification
Cancellation Letter).
---------------------------------------------------------------------------
Analysis of Comments Received
All issues raised in the case and rebuttal briefs by parties in
this investigation are addressed in the Issues and Decision Memorandum,
which is hereby adopted by this notice. A list of the issues raised is
attached to this notice as Appendix II.
Use of Facts Available and Adverse Facts Available
For purposes of this final determination, Commerce relied on facts
available with adverse inferences when calculating the margin for
Novatex Limited pursuant to sections 776(a)(1), 776(a)(2)(B)-(C) and
776(b) of the Act. For further information, see the Issues and Decision
Memorandum.
Changes Since the Preliminary Determination
Based on our analysis of the comments received and our findings at
verification, we made certain changes to the margin calculations. For a
discussion of these changes, see the Issues and Decision Memorandum.
All-Others Rate
Sections 735(c)(1)(B)(i)(II) and 735(c)(5)(A) of the Act provide
that Commerce shall determine an estimated all-others rate for all
exporters and producers not individually examined. This rate shall be
an amount equal to the weighted average of the estimated weighted-
average dumping margins established for exporters and producers
individually investigated, excluding any zero and de minimis margins,
and any margins determined entirely under section 776 of the Act.
However, when the estimated weighted-average dumping margins for all
exporters and producers individually investigated are zero or de
minimis, or determined entirely under section 776 of the Act, Commerce
shall use any reasonable method to establish the all-others rate,
including averaging the estimated weighted-average dumping margins for
the exporters and producers individually investigated.
In this investigation, Commerce based Novatex's rate entirely on
facts otherwise available. Accordingly, we will use any reasonable
method to establish the estimated all-others rate. Commerce's practice,
in such situations, is to base the all-others rate on an average of the
petition rates.\8\ We followed that practice here.
---------------------------------------------------------------------------
\8\ See, e.g., Notice of Preliminary Determination of Sales at
Less Than Fair Value: Sodium Nitrite from the Federal Republic of
Germany, 73 FR 21909, 21912 (April 23, 2008), unchanged in Notice of
Final Determination of Sales at Less Than Fair Value: Sodium Nitrite
from the Federal Republic of Germany, 73 FR 38986, 38987 (July 8,
2008), and accompanying Issues and Decision Memorandum at Comment 2;
see also Notice of Final Determination of Sales at Less Than Fair
Value: Raw Flexible Magnets from Taiwan, 73 FR 39673, 39674 (July
10, 2008); Steel Threaded Rod from Thailand: Preliminary
Determination of Sales at Less Than Fair Value and Affirmative
Preliminary Determination of Critical Circumstances, 78 FR 79670,
79671 (December 31, 2013), unchanged in Steel Threaded Rod from
Thailand: Final Determination of Sales at Less Than Fair Value and
Affirmative Final Determination of Critical Circumstances, 79 FR
14476, 14477 (March 14, 2014), 82 FR 47697, 47698.
---------------------------------------------------------------------------
Final Determination Margins
Commerce determines that the following estimated weighted-average
dumping margins exist:
------------------------------------------------------------------------
Estimated
weighted-
average
Exporter/producer dumping
margin
(percent)
------------------------------------------------------------------------
Novatex Limited \9\......................................... 59.92
All-Others.................................................. 43.81
------------------------------------------------------------------------
Disclosure
We will disclose any calculations performed within five days of any
public announcement of this notice in accordance with 19 CFR
351.224(b).
---------------------------------------------------------------------------
\9\ Commerce has determined that Novatex Limited and Gatron
Industries Limited are a single entity. See Issues and Decision
Memorandum.
---------------------------------------------------------------------------
Continuation of Suspension of Liquidation
In accordance with section 735(c)(1)(B) of the Act, Commerce will
instruct U.S. Customs and Border Protection (CBP) to continue to
suspend liquidation of all appropriate entries of PET resin from
Pakistan, as described in Appendix I of this notice, which were
entered, or withdrawn from warehouse, for consumption on or after May
4, 2018, the date of publication of the Preliminary Determination.
Furthermore, pursuant to section 735(c)(1)(B)(ii) of the Act and 19
CFR 351.210(d), Commerce will instruct CBP to require a cash deposit
for such entries of merchandise equal to the estimated weighted-average
dumping margin or the estimated all-others rate, as follows:
[[Page 48283]]
(1) The cash deposit rate for the respondent listed above will be equal
to the respondent-specific estimated weighted-average dumping margin
determined in this final determination; (2) if the exporter is not a
respondent identified above but the producer is, then the cash deposit
rate will be equal to the respondent-specific estimated weighted-
average dumping margin established for that producer of the subject
merchandise; and (3) the cash deposit rate for all other producers and
exporters will be equal to the all-others estimated weighted-average
dumping margin.
International Trade Commission Notification
In accordance with section 735(d) of the Act, we will notify the
U.S. International Trade Commission (ITC) of the final affirmative
determination of sales at LTFV. Because the final determination in this
proceeding is affirmative, in accordance with section 735(b)(2)(B) of
the Act, the ITC will make its final determination as to whether the
domestic industry in the United States is materially injured, or
threatened with material injury, by reason of imports of PET resin no
later than 45 days after our final determination. If the ITC determines
that material injury or threat of material injury does not exist, the
proceeding will be terminated and all cash deposits will be refunded.
If the ITC determines that such injury does exist, Commerce will issue
an antidumping duty order directing CBP to assess, upon further
instruction by Commerce, antidumping duties on all imports of the
subject merchandise entered, or withdrawn from warehouse, for
consumption on or after the effective date of the suspension of
liquidation, as discussed above in the ``Continuation of Suspension of
Liquidation'' section.
Notification Regarding Administrative Protective Orders
This notice will serve as the only reminder to parties, subject to
administrative protective order (APO), of their responsibility
concerning the destruction of proprietary information disclosed under
APO in accordance with 19 CFR 351.305(a)(3). Timely written
notification of return/destruction or APO materials or conversion to
judicial protective order is hereby requested. Failure to comply with
the regulations and the terms of an APO is a sanctionable violation.
Notification to Interested Parties
We are issuing and publishing this determination and notice in
accordance with sections 735(d) and 777(i) of the Act and 19 CFR
351.210(c).
Dated: September 17, 2018.
Gary Taverman,
Deputy Assistant Secretary for Antidumping and Countervailing Duty
Operations, performing the non-exclusive functions and duties of the
Assistant Secretary for Enforcement and Compliance.
Appendix I
Scope of the Investigation
The merchandise covered by this investigation is polyethylene
terephthalate (PET) resin having an intrinsic viscosity of at least
70, but not more than 88, milliliters per gram (0.70 to 0.88
deciliters per gram). The scope includes blends of virgin PET resin
and recycled PET resin containing 50 percent or more virgin PET
resin content by weight, provided such blends meet the intrinsic
viscosity requirements above. The scope includes all PET resin
meeting the above specifications regardless of additives introduced
in the manufacturing process.
The scope excludes PET-glycol resin, also referred to as PETG.
PET-glycol resins are manufactured by replacing a portion of the raw
material input monoethylene glycol (MEG) with one of five glycol
modifiers: Cyclohexanedimethanol (CHDM), diethylene glycol (DEG),
neopentyl glycol (NPG), isosorbide, or spiro glycol. Specifically,
excluded PET-glycol resins must contain a minimum of 10 percent, by
weight, of CHDM, DEG, NPG, isosorbide or spiro glycol, or some
combination of these glycol modifiers. Unlike subject PET resin,
PET-glycol resins are amorphous resins that are not solid-stated and
cannot be crystallized or recycled.
The merchandise subject to this investigation is properly
classified under subheadings 3907.61.0000 and 3907.69.0000 of the
Harmonized Tariff Schedule of the United States (HTSUS). Although
the HTSUS subheadings are provided for convenience and customs
purposes, the written description of the merchandise covered by this
investigation is dispositive.
Appendix II
List of Topics Discussed in the Issues and Decision Memorandum
I. Summary
II. Background
III. Scope of the Investigation
IV. Changes Since the Preliminary Determination
V. Use of Facts Otherwise Available and Adverse Inferences
VI. Discussion of the Issues
Comment 1: Whether Commerce Should Verify Novatex's Reported
Costs
Comment 2: Whether Commerce Should Apply Adverse Facts Available
to Novatex
Comment 3: Whether Commerce is Justified in Denying Novatex a
Duty Drawback Adjustment in Its Final Determination
VII. Recommendation
[FR Doc. 2018-20722 Filed 9-21-18; 8:45 am]
BILLING CODE 3510-DS-P