Cut-to-Length Carbon-Quality Steel Plate From India, Indonesia, and Korea; Determinations, 9027-9028 [2018-04227]
Download as PDF
Federal Register / Vol. 83, No. 42 / Friday, March 2, 2018 / Notices
Authority: 43 U.S.C. Chap. 3.
record for this investigation may be
viewed on the Commission’s electronic
docket (EDIS) at https://edis.usitc.gov.
FOR FURTHER INFORMATION CONTACT: The
Office of the Secretary, Docket Services,
U.S. International Trade Commission,
telephone (202) 205–1802.
SUPPLEMENTARY INFORMATION:
Marshal Wade,
Acting Chief Cadastral Surveyor of Oregon/
Washington.
[FR Doc. 2018–04317 Filed 3–1–18; 8:45 am]
BILLING CODE 4310–33–P
INTERNATIONAL TRADE
COMMISSION
[Investigation No. 337–TA–1101]
Certain Fuel Pump Assemblies Having
Vapor Separators and Components
Thereof; Institution of Investigation
U.S. International Trade
Commission.
ACTION: Notice.
AGENCY:
Notice is hereby given that a
complaint was filed with the U.S.
International Trade Commission on
January 31, 2018, under section 337 of
the Tariff Act of 1930, on behalf of
Carter Fuel Systems, LLC of Logansport,
Indiana. Supplements to the complaint
were filed on February 15, 16, and 22,
2018. The complaint alleges violations
of section 337 based upon the
importation into the United States, the
sale for importation, and the sale within
the United States after importation of
certain fuel pump assemblies having
vapor separators and components
thereof by reason of infringement of
certain claims of U.S. Patent No.
6,257,208 (‘‘the ’208 patent’’). The
complaint further alleges that an
industry in the United States exists as
required by subsection (a)(2) of section
337.
The complainant requests that the
Commission institute an investigation
and, after the investigation, issue a
limited exclusion order and a cease and
desist order.
ADDRESSES: The complaint, except for
any confidential information contained
therein, is available for inspection
during official business hours (8:45 a.m.
to 5:15 p.m.) in the Office of the
Secretary, U.S. International Trade
Commission, 500 E Street SW, Room
112, Washington, DC 20436, telephone
(202) 205–2000. Hearing impaired
individuals are advised that information
on this matter can be obtained by
contacting the Commission’s TDD
terminal on (202) 205–1810. Persons
with mobility impairments who will
need special assistance in gaining access
to the Commission should contact the
Office of the Secretary at (202) 205–
2000. General information concerning
the Commission may also be obtained
by accessing its internet server at
https://www.usitc.gov. The public
daltland on DSKBBV9HB2PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
18:10 Mar 01, 2018
Jkt 244001
Authority: The authority for institution of
this investigation is contained in section 337
of the Tariff Act of 1930, as amended, and
in section 210.10 of the Commission’s Rules
of Practice and Procedure, 19 CFR 210.10
(2017).
Scope of Investigation: Having
considered the complaint, the U.S.
International Trade Commission, on
February 26, 2018, ordered that—
(1) Pursuant to subsection (b) of
section 337 of the Tariff Act of 1930, as
amended, an investigation be instituted
to determine whether there is a
violation of subsection (a)(1)(B) of
section 337 in the importation into the
United States, the sale for importation,
or the sale within the United States after
importation of certain fuel pump
assemblies having vapor separators and
components thereof by reason of
infringement of one or more of claims
1–5 and 7–18 of the ’208 patent, and
whether an industry in the United
States exists as required by subsection
(a)(2) of section 337;
(2) For the purpose of the
investigation so instituted, the following
are hereby named as parties upon which
this notice of investigation shall be
served:
(a) The complainant is: Carter Fuel
Systems, LLC, 101 East Industrial
Boulevard, Logansport, Indiana 46947.
(b) The respondent is the following
entity alleged to be in violation of
section 337, and is the party upon
which the complaint is to be served:
Wenzhou Jushang (JS) Performance
Parts Co. Ltd., No. 989 LongShan Road,
Beiou Industry Zone, Wenzhou,
Zheijhang 325200, China.
(3) For the investigation so instituted,
the Chief Administrative Law Judge,
U.S. International Trade Commission,
shall designate the presiding
Administrative Law Judge.
The Office of Unfair Import
Investigations will not participate as a
party in this investigation.
Responses to the complaint and the
notice of investigation must be
submitted by the named respondents in
accordance with section 210.13 of the
Commission’s Rules of Practice and
Procedure, 19 CFR 210.13. Pursuant to
19 CFR 201.16(e) and 210.13(a), such
responses will be considered by the
Commission if received not later than 20
days after the date of service by the
PO 00000
Frm 00065
Fmt 4703
Sfmt 4703
9027
Commission of the complaint and the
notice of investigation. Extensions of
time for submitting responses to the
complaint and the notice of
investigation will not be granted unless
good cause therefor is shown.
Failure of a respondent to file a timely
response to each allegation in the
complaint and in this notice may be
deemed to constitute a waiver of the
right to appear and contest the
allegations of the complaint and this
notice, and to authorize the
administrative law judge and the
Commission, without further notice to
the respondent, to find the facts to be as
alleged in the complaint and this notice
and to enter an initial determination
and a final determination containing
such findings, and may result in the
issuance of an exclusion order or a cease
and desist order or both directed against
the respondent.
By order of the Commission.
Issued: February 26, 2018.
Lisa R. Barton,
Secretary to the Commission.
[FR Doc. 2018–04234 Filed 3–1–18; 8:45 am]
BILLING CODE 7020–02–P
INTERNATIONAL TRADE
COMMISSION
[Investigation Nos. 701–TA–388, 389, and
391 and 731–TA–817, 818, and 821 (Third
Review)]
Cut-to-Length Carbon-Quality Steel
Plate From India, Indonesia, and
Korea; Determinations
On the basis of the record 1 developed
in the subject five-year reviews, the
United States International Trade
Commission (‘‘Commission’’)
determines, pursuant to the Tariff Act of
1930 (‘‘the Act’’), that revocation of the
countervailing duty orders and
antidumping duty orders on cut-tolength carbon-quality steel plate from
India, Indonesia, and Korea would be
likely to lead to continuation or
recurrence of material injury to an
industry in the United States within a
reasonably foreseeable time.
Background
The Commission, pursuant to section
751(c) of the Act (19 U.S.C. 1675(c)),
instituted these reviews on December 1,
2016 (81 FR 86725) and determined on
March 6, 2017 that it would conduct full
reviews (82 FR 14030, March 16, 2017).
Notice of the scheduling of the
Commission’s reviews and of a public
1 The record is defined in sec. 207.2(f) of the
Commission’s Rules of Practice and Procedure (19
CFR 207.2(f)).
E:\FR\FM\02MRN1.SGM
02MRN1
9028
Federal Register / Vol. 83, No. 42 / Friday, March 2, 2018 / Notices
hearing to be held in connection
therewith was given by posting copies
of the notice in the Office of the
Secretary, U.S. International Trade
Commission, Washington, DC, and by
publishing the notice in the Federal
Register on August 10, 2017 (82 FR
37465). A revised schedule of the
Commission’s reviews was published on
October 27, 2017 (82 FR 49849). The
hearing was held in Washington, DC, on
January 4, 2018, and all persons who
requested the opportunity were
permitted to appear in person or by
counsel.
The Commission made these
determinations pursuant to section
751(c) of the Act (19 U.S.C. 1675(c)). It
completed and filed its determinations
in these reviews on February 26, 2018.
The views of the Commission are
contained in USITC Publication 4764
(February 2018), entitled Cut-to-Length
Carbon-Quality Steel Plate from India,
Indonesia and Korea: Investigation Nos.
701–TA–388, 389, and 391 and 731–TA–
817, 818, and 821 (Third Review).
By order of the Commission.
Issued: February 26, 2018.
Lisa R. Barton,
Secretary to the Commission.
[FR Doc. 2018–04227 Filed 3–1–18; 8:45 am]
BILLING CODE 7020–02–P
INTERNATIONAL TRADE
COMMISSION
[USITC SE–18–012]
Government in the Sunshine Act
Meeting Notice
United
States International Trade Commission.
TIME AND DATE: March 9, 2018 at 11:00
a.m.
PLACE: Room 101, 500 E Street SW,
Washington, DC 20436, Telephone:
(202) 205–2000.
STATUS: Open to the public.
MATTERS TO BE CONSIDERED:
1. Agendas for future meetings: None.
2. Minutes.
3. Ratification List.
4. Vote in Inv. Nos. 701–TA–597 and
731–TA–1407 (Preliminary) (Cast Iron
Soil Pipe from China). The Commission
is currently scheduled to complete and
file its determinations on March 12,
2018; views of the Commission are
currently scheduled to be completed
and filed on March 19, 2018.
5. Outstanding action jackets: None.
In accordance with Commission
policy, subject matter listed above, not
disposed of at the scheduled meeting,
may be carried over to the agenda of the
following meeting.
daltland on DSKBBV9HB2PROD with NOTICES
AGENCY HOLDING THE MEETING:
VerDate Sep<11>2014
18:10 Mar 01, 2018
Jkt 244001
By order of the Commission.
Issued: February 27, 2018.
William R. Bishop,
Supervisory Hearings and Information
Officer.
[FR Doc. 2018–04364 Filed 2–28–18; 11:15 am]
BILLING CODE 7020–02–P
INTERNATIONAL TRADE
COMMISSION
[Investigation No. 332–503]
Earned Import Allowance Program:
Evaluation of the Effectiveness of the
Program for Certain Apparel From the
Dominican Republic, Ninth Annual
Review
United States International
Trade Commission.
ACTION: Notice of opportunity to provide
written comments in connection with
the Commission’s ninth annual review.
AGENCY:
The U.S. International Trade
Commission (Commission) has
announced its schedule, including
deadlines for filing written submissions,
in connection with preparing a report
on its ninth annual review in
investigation No. 332–503, Earned
Import Allowance Program: Evaluation
of the Effectiveness of the Program for
Certain Apparel from the Dominican
Republic, Ninth Annual Review.
DATES:
April 30, 2018: Deadline for filing
written submissions.
August 3, 2018: Transmittal of ninth
report to House Committee on Ways and
Means and Senate Committee on
Finance.
ADDRESSES: All Commission offices,
including the Commission’s hearing
rooms, are located in the United States
International Trade Commission
Building, 500 E Street SW, Washington,
DC. All written submissions, including
statements, and briefs, should be
addressed to the Secretary, United
States International Trade Commission,
500 E Street SW, Washington, DC
20436. The public file for this
investigation may be viewed on the
Commission’s electronic docket (EDIS)
at https://edis.usitc.gov.
FOR FURTHER INFORMATION CONTACT:
Project Leader Mary Roop (202–708–
2277 or mary.roop@usitc.gov) for
information specific to this
investigation. For information on the
legal aspects of this investigation,
contact William Gearhart of the
Commission’s Office of the General
Counsel (202–205–3091 or
william.gearhart@usitc.gov). The media
should contact Margaret O’Laughlin,
SUMMARY:
PO 00000
Frm 00066
Fmt 4703
Sfmt 4703
Office of External Relations (202–205–
1819 or margaret.olaughlin@usitc.gov).
Hearing-impaired individuals may
obtain information on this matter by
contacting the Commission’s TDD
terminal at 202–205–1810. General
information concerning the Commission
may also be obtained by accessing its
website (https://www.usitc.gov). Persons
with mobility impairments who will
need special assistance in gaining access
to the Commission should contact the
Office of the Secretary at 202–205–2000.
Background: Section 404 of the
Dominican Republic-Central AmericaUnited States Free Trade Agreement
Implementation Act (DR–CAFTA Act)
(19 U.S.C. 4112) required the Secretary
of Commerce to establish an Earned
Import Allowance Program (EIAP) and
directed the Commission to conduct
annual reviews of the program to
evaluate its effectiveness and make
recommendations for improvements.
Section 404 of the DR–CAFTA Act
authorizes certain apparel articles
wholly assembled in an eligible country
to enter the United States free of duty
if accompanied by a certificate that
shows evidence of the purchase of
certain U.S. fabric. The term ‘‘eligible
country’’ is defined to mean the
Dominican Republic. More specifically,
the program allows producers (in the
Dominican Republic) that purchase a
certain quantity of qualifying U.S. fabric
to produce certain cotton bottoms in the
Dominican Republic to receive a credit
that can be used to ship a certain
quantity of eligible apparel using thirdcountry fabrics from the Dominican
Republic to the United States free of
duty.
Section 404(d) directs the
Commission to conduct an annual
review of the program to evaluate the
effectiveness of the program and make
recommendations for improvements.
The Commission is required to submit
its reports containing the results of its
reviews to the House Committee on
Ways and Means and the Senate
Committee on Finance. Copies of the
Commission’s prior reports are available
on the Commission’s website at
www.usitc.gov, including the eighth
annual report, which was published on
September 28, 2017 (ITC Publication
4730). The Commission expects to
submit its report on its ninth annual
review by August 3, 2018.
The Commission instituted this
investigation pursuant to section 332(g)
of the Tariff Act of 1930 to facilitate
docketing of submissions and also to
facilitate public access to Commission
records through the Commission’s EDIS
electronic records system. The
Commission published notice of
E:\FR\FM\02MRN1.SGM
02MRN1
Agencies
[Federal Register Volume 83, Number 42 (Friday, March 2, 2018)]
[Notices]
[Pages 9027-9028]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-04227]
-----------------------------------------------------------------------
INTERNATIONAL TRADE COMMISSION
[Investigation Nos. 701-TA-388, 389, and 391 and 731-TA-817, 818, and
821 (Third Review)]
Cut-to-Length Carbon-Quality Steel Plate From India, Indonesia,
and Korea; Determinations
On the basis of the record \1\ developed in the subject five-year
reviews, the United States International Trade Commission
(``Commission'') determines, pursuant to the Tariff Act of 1930 (``the
Act''), that revocation of the countervailing duty orders and
antidumping duty orders on cut-to-length carbon-quality steel plate
from India, Indonesia, and Korea would be likely to lead to
continuation or recurrence of material injury to an industry in the
United States within a reasonably foreseeable time.
---------------------------------------------------------------------------
\1\ The record is defined in sec. 207.2(f) of the Commission's
Rules of Practice and Procedure (19 CFR 207.2(f)).
---------------------------------------------------------------------------
Background
The Commission, pursuant to section 751(c) of the Act (19 U.S.C.
1675(c)), instituted these reviews on December 1, 2016 (81 FR 86725)
and determined on March 6, 2017 that it would conduct full reviews (82
FR 14030, March 16, 2017). Notice of the scheduling of the Commission's
reviews and of a public
[[Page 9028]]
hearing to be held in connection therewith was given by posting copies
of the notice in the Office of the Secretary, U.S. International Trade
Commission, Washington, DC, and by publishing the notice in the Federal
Register on August 10, 2017 (82 FR 37465). A revised schedule of the
Commission's reviews was published on October 27, 2017 (82 FR 49849).
The hearing was held in Washington, DC, on January 4, 2018, and all
persons who requested the opportunity were permitted to appear in
person or by counsel.
The Commission made these determinations pursuant to section 751(c)
of the Act (19 U.S.C. 1675(c)). It completed and filed its
determinations in these reviews on February 26, 2018. The views of the
Commission are contained in USITC Publication 4764 (February 2018),
entitled Cut-to-Length Carbon-Quality Steel Plate from India, Indonesia
and Korea: Investigation Nos. 701-TA-388, 389, and 391 and 731-TA-817,
818, and 821 (Third Review).
By order of the Commission.
Issued: February 26, 2018.
Lisa R. Barton,
Secretary to the Commission.
[FR Doc. 2018-04227 Filed 3-1-18; 8:45 am]
BILLING CODE 7020-02-P