February 13, 2018 – Federal Register Recent Federal Regulation Documents
Results 101 - 117 of 117
Outer Continental Shelf Air Regulations Update To Include New Jersey State Requirements
The Environmental Protection Agency (EPA) is proposing to update a portion of the Outer Continental Shelf (OCS) Air Regulations applying to OCS sources located within 25 miles of states' seaward boundaries which must be promulgated into the regulations and updated periodically to remain consistent with the requirements on the corresponding onshore area (COA), which is typically the state geographically closest to the OCS source. The portion of the OCS air regulations that is being updated pertains to the requirements for OCS sources for which the State of New Jersey is the COA. The intended effect of approving the OCS requirements for the State of New Jersey is to regulate emissions from OCS sources in accordance with the requirements onshore. The requirements discussed below are proposed to be incorporated by reference into the Code of Federal Regulations and are listed in the appendix to the OCS air regulations.
Ambient Air Monitoring Reference and Equivalent Methods; Designation of One New Reference Method
Notice is hereby given that the Environmental Protection Agency (EPA) has designated one new reference method for measuring concentrations of nitrogen dioxide (NO2) in ambient air.
Amendment of Multiple Air Traffic Service (ATS) Routes; North Central United States
The FAA is amending four high altitude Area Navigation (RNAV) Q-routes (Q-140, Q-818, Q-935, and Q-947) that cross the United States (U.S.)/Canada border in the north central U.S. This action updates the latitude/longitude coordinates for three Canadian waypoints listed in the Q-route descriptions contained in the FAA aeronautical database to match the Canadian aeronautical database source information.
Neurological Devices Panel of the Medical Devices Advisory Committee; Amendment of Notice
The Food and Drug Administration (FDA) is announcing an amendment to the notice of meeting of the Neurological Devices Panel of the Medical Devices Advisory Committee. This meeting was announced in the Federal Register of December 28, 2017. The amendment is being made to reflect a change in the Procedure portion of the document. There are no other changes.
Airworthiness Directives; Stemme AG Gliders
We are superseding Airworthiness Directive (AD) 2017-10-11 for Stemme AG Model Stemme S10-VT gliders (type certificate previously held by Stemme GmbH & Co. KG). This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and address an unsafe condition on an aviation product. The MCAI describes the unsafe condition as certain propeller front transmission gear wheels having insufficient material strength because of improper heat treatment during manufacturing. We are issuing this AD to require actions to address the unsafe condition on these products and to add Stemme AG Model Stemme S 12 gliders to the Applicability section.
Airworthiness Directives; Dassault Aviation Airplanes
We are adopting a new airworthiness directive (AD) for certain Dassault Aviation Model FALCON 7X airplanes. This AD was prompted by a report indicating that fuselage panels were manufactured with defects that could reduce panel fatigue limits. This AD requires a one-time inspection of the affected panels and repair if necessary, and for certain airplanes, installation of a stiffener. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Various Aircraft Equipped With BRP-Rotax GmbH & Co KG 912 A Series Engine
We are adopting a new airworthiness directive (AD) for various aircraft equipped with a BRP-Rotax GmbH & Co. KG (formerly BRP- Powertrain GmbH & Co. KG; Bombardier-Rotax GmbH & Co. KG; Bombardier- Rotax GmbH) 912 A series engine. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and address an unsafe condition on an aviation product. The MCAI describes the unsafe condition as defective valve push-rod assemblies manufactured from June 8, 2016, through October 2, 2017. We are issuing this AD to require actions to address the unsafe condition on these products.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Biweekly Notice; Applications and Amendments to Facility Operating Licenses and Combined Licenses Involving No Significant Hazards Considerations
Pursuant to Section 189a.(2) of the Atomic Energy Act of 1954, as amended (the Act), the U.S. Nuclear Regulatory Commission (NRC) is publishing this regular biweekly notice. The Act requires the Commission to publish notice of any amendments issued, or proposed to be issued, and grants the Commission the authority to issue and make immediately effective any amendment to an operating license or combined license, as applicable, upon a determination by the Commission that such amendment involves no significant hazards consideration, notwithstanding the pendency before the Commission of a request for a hearing from any person. This biweekly notice includes all notices of amendments issued, or proposed to be issued, from January 13, 2018, to January 29, 2018. The last biweekly notice was published on January 30, 2018.
Airworthiness Directives; Pacific Aerospace Limited Airplanes
We are adopting a new airworthiness directive (AD) for Pacific Aerospace Limited Model 750XL airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as non-conforming fuel tank caps, which could lead to fuel loss during flight. We are issuing this AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; Pacific Aerospace Limited Airplanes
We are adopting a new airworthiness directive (AD) for Pacific Aerospace Limited Model 750XL airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as abrasion damage of components or wiring behind the instrument panel. We are issuing this AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; Aeroclubul Romaniei Gliders
We are adopting a new airworthiness directive (AD) for Aeroclubul Romaniei Model IS-28B2 gliders. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as cracks at stringers in the rear fuselage of several Model IS-28B2 gliders. We are issuing this AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; Textron Aviation Inc. Airplanes
We are adopting a new airworthiness directive (AD) for certain Textron Aviation Inc. Models 401, 401A, 401B, 402, 402A, 402B, 402C, 411, 411A, 414, 414A 421, 421A, 421B, 421C, and 425 airplanes. This AD requires repetitively inspecting the left and the right forward lower carry through spar cap for cracks and replacing the carry through spar if cracks are found. This AD was prompted by a report of a fully cracked lower forward carry through spar cap found on an affected airplane. We are issuing this AD to address the unsafe condition on these products.
Rules Concerning Prepaid Accounts Under the Electronic Fund Transfer Act (Regulation E) and the Truth in Lending Act (Regulation Z)
The Bureau of Consumer Financial Protection (Bureau) is amending Regulation E, which implements the Electronic Fund Transfer Act, and Regulation Z, which implements the Truth in Lending Act, and the official interpretations to those regulations. This rulemaking relates to a final rule published in the Federal Register on November 22, 2016, as amended on April 25, 2017, regarding prepaid accounts under Regulations E and Z. The Bureau is finalizing modifications to several aspects of that rule, including with respect to error resolution and limitations on liability for prepaid accounts where the financial institution has not successfully completed its consumer identification and verification process; application of the rule's credit-related provisions to digital wallets that are capable of storing funds; certain other clarifications and minor adjustments; technical corrections; and an extension of the overall effective date to April 1, 2019.
Egg Products Inspection Regulations
The Food Safety and Inspection Service (FSIS) is proposing to amend the egg products inspection regulations by requiring official plants that process egg products (herein also referred to as ``egg products plants'' or ``plants'') to develop and implement Hazard Analysis and Critical Control Point (HACCP) Systems and Sanitation Standard Operating Procedures (Sanitation SOPs) and to meet other sanitation requirements consistent with the meat and poultry regulations. FSIS is proposing to eliminate those current regulatory provisions that are inconsistent with HACCP, Sanitation SOPs, and the proposed sanitation requirements. FSIS is also proposing to specify in the regulations that official plants are required to process egg products to be edible without additional preparation to achieve food safety. In addition, FSIS is proposing to: Provide for generic approval as part of the prior label approval system for egg products; make changes to labeling requirements for shell eggs consistent with those in the Food and Drug Administration's (FDA's) regulations; require special handling instructions on egg products; eliminate the requirements for prior approval by FSIS of egg products plant drawings, specifications, and equipment; incorporate egg products plants into the coverage of the ``Rules of Practice'' that the Agency follows when initiating administrative enforcement actions; and change the Agency's interpretation of the requirement for continuous inspection in agency law. FSIS is also announcing that it is seeking public comment on draft guidance designed to help small and very small plants producing egg products to meet the new regulatory requirements being proposed in this rulemaking. Should the rule become final, FSIS intends to finalize this guidance.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.