Government in the Sunshine Act Meeting Notice, 3771 [2018-01625]
Download as PDF
<![CDATA[
Federal Register / Vol. 83, No. 18 / Friday, January 26, 2018 / Notices
and a final determination containing
such findings, and may result in the
issuance of an exclusion order or a cease
and desist order or both directed against
the respondent.
By order of the Commission.
Issued: January 19, 2018.
Lisa R. Barton,
Secretary to the Commission.
[FR Doc. 2018–01379 Filed 1–25–18; 8:45 am]
BILLING CODE 7020–02–P
INTERNATIONAL TRADE
COMMISSION
[USITC SE–18–004]
Government in the Sunshine Act
Meeting Notice
United
States International Trade Commission.
TIME AND DATE: January 30, 2018 at
11:00 a.m.
PLACE: Room 100, 500 E Street SW,
Washington, DC 20436, Telephone:
(202) 205–2000.
STATUS: Open to the public.
MATTERS TO BE CONSIDERED:
1. Agendas for future meetings: None.
2. Minutes.
3. Ratification List.
4. Vote in Inv. No. 731–TA–709 (Fourth
Review)(Seamless Carbon and Alloy
Steel Standard, Line, and Pressure
Pipe from Germany). The
Commission is currently scheduled
to complete and file its
determination and views of the
Commission by February 13, 2018.
5. Outstanding action jackets: None.
In accordance with Commission
policy, subject matter listed above, not
disposed of at the scheduled meeting,
may be carried over to the agenda of the
following meeting.
AGENCY HOLDING THE MEETING:
By order of the Commission.
Issued: January 23, 2018.
William R. Bishop,
Supervisory Hearings and Information
Officer.
[FR Doc. 2018–01625 Filed 1–24–18; 4:15 pm]
BILLING CODE 7020–02–P
INTERNATIONAL TRADE
COMMISSION
daltland on DSKBBV9HB2PROD with NOTICES
[Investigation No. 337–TA–1097]
Certain Solid State Storage Drives,
Stacked Electronics Components, and
Products Containing Same; Institution
of Investigation
U.S. International Trade
Commission.
AGENCY:
VerDate Sep<11>2014
20:14 Jan 25, 2018
Jkt 244001
ACTION:
Notice.
Notice is hereby given that a
complaint was filed with the U.S.
International Trade Commission on
December 21, 2017, under section 337 of
the Tariff Act of 1930, as amended, on
behalf of BiTMICRO, LLC of
Reston,Virginia. An amended complaint
was filed on January 9, 2018. A
supplement to the amended complaint
was filed on January 18, 2018. The
amended complaint alleges violations of
section 337 based upon the importation
into the United States, the sale for
importation, and the sale within the
United States after importation of
certain solid state storage drives,
stacked electronics components, and
products containing same by reason of
infringement of U.S. Patent No.
7,826,243 (‘‘the ’243 Patent’’); U.S.
Patent No. 6,529,416 (‘‘the ’416 Patent’’);
U.S. Patent No. 9,135,190 (‘‘the ’190
Patent’’); and U.S. Patent No. 8,093,103
(‘‘the ’103 Patent’’). The amended
complaint further alleges that an
industry in the United States exists as
required by the applicable Federal
Statute.
The complainant requests that the
Commission institute an investigation
and, after the investigation, issue a
limited exclusion order and cease and
desist orders.
ADDRESSES: The amended complaint,
except for any confidential information
contained therein, is available for
inspection during official business
hours (8:45 a.m. to 5:15 p.m.) in the
Office of the Secretary, U.S.
International Trade Commission, 500 E
Street SW, Room 112, Washington, DC
20436, telephone (202) 205–2000.
Hearing impaired individuals are
advised that information on this matter
can be obtained by contacting the
Commission’s TDD terminal on (202)
205–1810. Persons with mobility
impairments who will need special
assistance in gaining access to the
Commission should contact the Office
of the Secretary at (202) 205–2000.
General information concerning the
Commission may also be obtained by
accessing its internet server at https://
www.usitc.gov. The public record for
this investigation may be viewed on the
Commission’s electronic docket (EDIS)
at https://edis.usitc.gov.
FOR FURTHER INFORMATION CONTACT:
Pathenia M. Proctor, The Office of
Unfair Import Investigations, U.S.
International Trade Commission,
telephone (202) 205–2560.
SUPPLEMENTARY INFORMATION:
SUMMARY:
Authority: The authority for institution of
this investigation is contained in section 337
PO 00000
Frm 00099
Fmt 4703
Sfmt 4703
3771
of the Tariff Act of 1930, as amended, 19
U.S.C. 1337 and in section 210.10 of the
Commission’s Rules of Practice and
Procedure, 19 CFR 210.10 (2017).
Scope of Investigation: Having
considered the amended complaint, the
U.S. International Trade Commission,
on January 19, 2018, ordered that—
(1) Pursuant to subsection (b) of
section 337 of the Tariff Act of 1930, as
amended, an investigation be instituted
to determine whether there is a
violation of subsection (a)(1)(B) of
section 337 in the importation into the
United States, the sale for importation,
or the sale within the United States after
importation of certain solid state storage
drives, stacked electronics components,
and products containing same by reason
of infringement of one or more of claims
1, 2, 11, and 12 of the ’243 Patent;
claims 1–20 of the ’416 Patent; claims
1–101 of the ’190 Patent; and claims 12
and 16 of the ’103 Patent; and whether
an industry in the United States exists
as required by subsection (a)(2) of
section 337;
(2) Notwithstanding any Commission
Rules that would otherwise apply, the
presiding Administrative Law Judge
shall hold an early evidentiary hearing,
find facts, and issue an early decision,
as to whether the complainant has
satisfied the economic prong of the
domestic industry requirement. Any
such decision shall be in the form of an
initial determination (ID). Petitions for
review of such an ID shall be due five
calendar days after service of the ID; any
replies shall be due three business days
after service of a petition. The ID will
become the Commission’s final
determination 30 days after the date of
service of the ID unless the Commission
determines to review the ID. Any such
review will be conducted in accordance
with Commission Rules 210.43, 210.44,
and 210.45, 19 CFR 210.43, 210.44, and
210.45. The Commission expects the
issuance of an early ID relating to the
economic prong of the domestic
industry requirement within 100 days of
institution, except that the presiding
ALJ may grant a limited extension of the
ID for good cause shown. The issuance
of an early ID finding that complainant
does not satisfy the economic prong of
the domestic industry requirement shall
stay the investigation unless the
Commission orders otherwise; any other
decision shall not stay the investigation
or delay the issuance of a final ID
covering the other issues of the
investigation;
(3) Pursuant to Commission Rule
210.50(b)(1), 19 CFR 210.50(b)(1), the
presiding administrative law judge shall
take evidence or other information and
hear arguments from the parties or other
E:\FR\FM\26JAN1.SGM
26JAN1
]]>Agencies
[Federal Register Volume 83, Number 18 (Friday, January 26, 2018)]
[Notices]
[Page 3771]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-01625]
-----------------------------------------------------------------------
INTERNATIONAL TRADE COMMISSION
[USITC SE-18-004]
Government in the Sunshine Act Meeting Notice
Agency Holding the Meeting: United States International Trade
Commission.
Time and Date: January 30, 2018 at 11:00 a.m.
Place: Room 100, 500 E Street SW, Washington, DC 20436, Telephone:
(202) 205-2000.
Status: Open to the public.
Matters to be Considered:
1. Agendas for future meetings: None.
2. Minutes.
3. Ratification List.
4. Vote in Inv. No. 731-TA-709 (Fourth Review)(Seamless Carbon and
Alloy Steel Standard, Line, and Pressure Pipe from Germany). The
Commission is currently scheduled to complete and file its
determination and views of the Commission by February 13, 2018.
5. Outstanding action jackets: None.
In accordance with Commission policy, subject matter listed above,
not disposed of at the scheduled meeting, may be carried over to the
agenda of the following meeting.
By order of the Commission.
Issued: January 23, 2018.
William R. Bishop,
Supervisory Hearings and Information Officer.
[FR Doc. 2018-01625 Filed 1-24-18; 4:15 pm]
BILLING CODE 7020-02-P
