November 15, 2017 – Federal Register Recent Federal Regulation Documents
Results 1 - 22 of 22
Internet Communication Disclaimers; Extension of Comment Period
On October 10, 2017, the Federal Election Commission reopened the comment period on the Advance Notice of Proposed Rulemaking (``ANPRM'') seeking comment on whether to begin a rulemaking to revise its regulations concerning disclaimers on certain internet communications and, if so, on what changes should be made to those rules. The Commission has decided to extend the comment period for one business day due to technological difficulties.
Airworthiness Criteria: Glider Design Criteria for DG Flugzeugbau GmbH Model DG-1000M Glider
These airworthiness design criteria are for the DG Flugzeugbau GmbH model DG-1000M glider. The Administrator finds the design criteria, which make up the certification basis for the DG-1000M glider, acceptable.
Disposal of Consumer Report Information and Records
The Federal Trade Commission has completed its regulatory review of its rule regarding Disposal of Consumer Report Information and Records as part of the Commission's systematic review of all current Commission rules and guides, and has determined to retain the Rule in its current form.
Updates Concerning Non-Geostationary, Fixed-Satellite Service Systems and Related Matters
The Federal Communications Commission proposes to remove the domestic coverage requirement for non-geostationary-satellite orbit (NGSO), fixed-satellite service (FSS) satellite systems.
Fraser River Sockeye and Pink Salmon Fisheries; Inseason Orders
NMFS publishes Fraser River salmon inseason orders to regulate treaty and non-treaty (all citizen) commercial salmon fisheries in U.S. waters. The orders were issued by the Fraser River Panel (Panel) of the Pacific Salmon Commission (Commission) and subsequently approved and issued by NMFS during the 2017 salmon fisheries within the U.S. Fraser River Panel Area. These orders established fishing dates, times, and areas for the gear types of U.S. treaty Indian and all citizen commercial fisheries during the period the Panel exercised jurisdiction over these fisheries.
Atlantic Coastal Fisheries Cooperative Management Act Provisions; American Lobster Fishery; Control Date for Lobster Conservation Management Areas
This document announces that NMFS is considering changes to the lobster management program and may select a control date to restrict the number of permits or traps an individual or business entity may own, with specific emphasis on Lobster Conservation Management Areas (LCMAs) 2 and 3. NMFS may use the existing control date of January 27, 2014, which was published in the Federal Register, the publication date of this present ANPR, or another date for this purpose, pending public comment and further input by the Atlantic States Marine Fisheries Commission (Commission). This action may be necessary to control effort in the American lobster fishery and mitigate impacts on the depleted Southern New England (SNE) lobster stock. NMFS intends for this document to promote awareness of possible rulemaking and notify the public that actions taken to acquire lobster trap allocation and permits after the control date may not be recognized in the future.
Fisheries of the Northeastern United States; Amendment 6 to the Tilefish Fishery Management Plan
This final rule implements management measures previously approved for Amendment 6 to the Tilefish Fishery Management Plan and publicizes status quo management measures for 2018. Amendment 6 was developed by the Mid-Atlantic Fishery Management Council to establish management measures and 2017 harvest limits for the blueline tilefish fishery north of the Virginia/North Carolina border. The intended effect of this action is to establish permanent management measures for this fishery, consistent with requirements of the Magnuson-Stevens Act.
Airworthiness Directives; General Electric Company Turbofan Engines
We are adopting a new airworthiness directive (AD) for certain General Electric Company (GE) CF34-8C1, CF34-8C5, CF34-8C5A1, and CF34- 8C5B1 engines. This AD requires an inspection of the bleed air manifold link rod assemblies and the supply, return, and drain fuel fittings on the operability bleed valve (OBV). This AD was prompted by an engine fire that occurred as a result of malfunctions related to the OBV. We are issuing this AD to address the unsafe condition on these products.
Treatment of Certain Transfers of Property to Foreign Corporations; Correction
This document contains corrections to final regulations (TD 9803) that were published in the Federal Register on Friday, December 16, 2016. The final regulations are related to certain transfers of property by United States persons to foreign corporations.
Emergency Preparedness Requirements for Small Modular Reactors and Other New Technologies
The U.S. Nuclear Regulatory Commission (NRC) is making available a regulatory basis document in support of a rulemaking that would develop new emergency preparedness (EP) requirements for small modular reactors (SMRs) and other new technologies (ONTs), such as non- light-water reactors and medical isotope production facilities. The regulatory basis concludes that there is sufficient justification to proceed with rulemaking to develop a clear set of rules and guidance for EP for SMRs and ONTs. The regulatory basis also concludes that the principle of using a dose-at-distance and consequence-oriented approach to determine the appropriate size of an emergency planning zone can be applied to SMRs and ONTs. The NRC is not seeking public comment on this document. There will be an opportunity for formal public comment on the proposed rule when it is published in the Federal Register.
Health Education Assistance Loan (HEAL) Program
On July 1, 2014, the HEAL Program was transferred from the U.S. Department of Health and Human Services (HHS) to the U.S. Department of Education (the Department). To reflect this transfer and to facilitate the servicing of all HEAL loans that are currently held by the Department, the Secretary adds the HEAL Program regulations to the Department's chapter in the Code of Federal Regulations (CFR).
Airworthiness Directives; the Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by reports of crack indications in the right wing upper aft skin, originating from fastener holes common to the rear spar upper chord. This AD requires repetitive inspections for cracking of the wing upper aft skin, and applicable on-condition actions. We are issuing this AD to address the unsafe condition on these products.
Benefits Payable in Terminated Single-Employer Plans; Interest Assumptions for Paying Benefits
This final rule amends the Pension Benefit Guaranty Corporation's regulation on Benefits Payable in Terminated Single- Employer Plans to prescribe interest assumptions under the regulation for valuation dates in December 2017. The interest assumptions are used for paying benefits under terminating single-employer plans covered by the pension insurance system administered by PBGC.
Airworthiness Directives; Airbus Airplanes
We are adopting a new airworthiness directive (AD) for certain Airbus Model A300 B4-600R series airplanes; Model A300 B4-603, B4-620, and B4-622 airplanes; Model A300 C4-605R Variant F airplanes; and Model A300 F4-605R airplanes. This AD was prompted by a determination that the top stringer joints at rib 18 are an area of uniform stress distribution, which indicates that cracks may develop in adjacent stringers at the same time. This AD requires an inspection of the upper wing skin and top stringer joints, and modification of the stringer joint couplings if necessary. We are issuing this AD to address the unsafe condition on these products.
Alaska; Hunting and Trapping in National Preserves
The National Park Service (NPS) intends to initiate a rulemaking process that will consider changes to regulations applicable to Alaska that were promulgated in October 2015.
International Services Surveys: BE-120 Benchmark Survey of Transactions in Selected Services and Intellectual Property With Foreign Persons
This proposed rule would amend regulations of the Department of Commerce's Bureau of Economic Analysis (BEA) to renew reporting requirements for the mandatory BE-120 Benchmark Survey of Transactions in Selected Services and Intellectual Property with Foreign Persons. This survey will apply to the 2017 fiscal reporting year. The benchmark survey covers the universe of transactions in selected services and intellectual property and is BEA's most comprehensive survey of such transactions. For the 2017 benchmark survey, BEA proposes several changes in the data items collected, the design of the survey form, and the reporting requirements for the survey. This mandatory survey would be conducted under the authority of the International Investment and Trade in Services Survey Act.
Miscellaneous Corrections
The U.S. Nuclear Regulatory Commission (NRC) is amending its regulations to make miscellaneous corrections. The amendments include correcting references, an address and a misspelling. The amendments will also make references to persons in one part of the NRC's regulations gender neutral. This document is necessary to inform the public of these non-substantive amendments to the NRC's regulations.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that the fuselage crown skin panels are subject to widespread fatigue damage (WFD). This AD requires repetitive inspections, replacement, and applicable on-condition actions for certain fuselage crown skin panels. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Rockwell Collins, Inc. Traffic Surveillance System Processing Unit
We are adopting a new airworthiness directive (AD) for certain Rockwell Collins, Inc. TSS-4100 Traffic Surveillance System Processing Units that incorporate TSSA-4100 Field Loadable Software (FLS) Rockwell Collins part numbers 810-0052-002/-003/-010/-011/-012/-100/-101 and are installed on airplanes. This AD was prompted by five instances of air traffic control observing coasting (extrapolated stale data) of automatic dependent surveillance-broadcast data (position/velocity data). This AD requires installing the TSSA-4100 FLS upgrades on the TSS-4100 units. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B16 (CL-604 Variant) airplanes. This AD was prompted by reports of in-service incidents regarding the loss of all air data system information provided to the flightcrew. This AD requires revising the airplane flight manual (AFM) to provide ``Unreliable Airspeed'' procedures to the flightcrew to stabilize the airplane's airspeed and attitude for continued safe flight and landing. We are issuing this AD to address the unsafe condition on these products.
Medicare Program; Revisions to Payment Policies Under the Physician Fee Schedule and Other Revisions to Part B for CY 2018; Medicare Shared Savings Program Requirements; and Medicare Diabetes Prevention Program
This major final rule addresses changes to the Medicare physician fee schedule (PFS) and other Medicare Part B payment policies such as changes to the Medicare Shared Savings Program, to ensure that our payment systems are updated to reflect changes in medical practice and the relative value of services, as well as changes in the statute. In addition, this final rule includes policies necessary to begin offering the expanded Medicare Diabetes Prevention Program model.
Airworthiness Directives; 328 Support Services GmbH (Type Certificate Previously Held by AvCraft Aerospace GmbH; Fairchild Dornier GmbH; Dornier Luftfahrt GmbH) Airplanes
We are adopting a new airworthiness directive (AD) for certain 328 Support Services GmbH Model 328-100 and Model 328-300 airplanes. This AD was prompted by reports of broken bonding wires of certain fuel line clamps. This AD requires repetitive inspections of certain fuel line clamps for discrepancies; repetitive inspections of certain parts for chafing marks; and replacement of any discrepant parts. This AD also includes an optional modification, which is a terminating action for the inspections. We are issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
