Intertek Testing Services NA, Inc.: Application for Expansion of Recognition, 41292-41294 [2017-18428]
Download as PDF
mstockstill on DSK30JT082PROD with NOTICES
41292
Federal Register / Vol. 82, No. 167 / Wednesday, August 30, 2017 / Notices
Health Administration (MSHA)
sponsored information collection
request (ICR) titled, ‘‘Escape and
Evacuation Plans,’’ to the Office of
Management and Budget (OMB) for
review and approval for continued use,
without change, in accordance with the
Paperwork Reduction Act of 1995
(PRA). Public comments on the ICR are
invited.
DATES: The OMB will consider all
written comments that agency receives
on or before September 29, 2017.
ADDRESSES: A copy of this ICR with
applicable supporting documentation;
including a description of the likely
respondents, proposed frequency of
response, and estimated total burden
may be obtained free of charge from the
RegInfo.gov Web site at https://
www.reginfo.gov/public/do/
PRAViewICR?ref_nbr=201705-1219-003
(this link will only become active on the
day following publication of this notice)
or by contacting Michel Smyth by
telephone at 202–693–4129, TTY 202–
693–8064, (these are not toll-free
numbers) or by email at DOL_PRA_
PUBLIC@dol.gov.
Submit comments about this request
by mail to the Office of Information and
Regulatory Affairs, Attn: OMB Desk
Officer for DOL–MSHA, Office of
Management and Budget, Room 10235,
725 17th Street NW., Washington, DC
20503; by Fax: 202–395–5806 (this is
not a toll-free number); or by email:
OIRA_submission@omb.eop.gov.
Commenters are encouraged, but not
required, to send a courtesy copy of any
comments by mail or courier to the U.S.
Department of Labor-OASAM, Office of
the Chief Information Officer, Attn:
Departmental Information Compliance
Management Program, Room N1301,
200 Constitution Avenue NW.,
Washington, DC 20210; or by email:
DOL_PRA_PUBLIC@dol.gov.
FOR FURTHER INFORMATION CONTACT:
Michel Smyth by telephone at 202–693–
4129, TTY 202–693–8064, (these are not
toll-free numbers) or by email at DOL_
PRA_PUBLIC@dol.gov.
SUPPLEMENTARY INFORMATION: This ICR
seeks to extend PRA authority for the
Escape and Evacuation Plans
information collection requirements
codified in regulations 30 CFR
57.11053, which requires the
development of an escape and
evacuation plan specifically addressing
the unique conditions of each
underground metal and nonmetal mine
and requires that revisions be made as
mining progresses. The plan must be
available to MSHA representatives and
conspicuously posted at locations
convenient to all persons on the surface
VerDate Sep<11>2014
17:40 Aug 29, 2017
Jkt 241001
and underground. The mine operator
and the MSHA are required jointly to
review the plan at least once every six
months. Federal Mine Safety and Health
Act of 1977, as amended section 103(h)
authorizes this information collection.
See 30 U.S.C. 813(h).
This information collection is subject
to the PRA. A Federal agency generally
cannot conduct or sponsor a collection
of information, and the public is
generally not required to respond to an
information collection, unless it is
approved by the OMB under the PRA
and displays a currently valid OMB
Control Number. In addition,
notwithstanding any other provisions of
law, no person shall generally be subject
to penalty for failing to comply with a
collection of information that does not
display a valid Control Number. See 5
CFR 1320.5(a) and 1320.6. The DOL
obtains OMB approval for this
information collection under Control
Number 1219–0046.
OMB authorization for an ICR cannot
be for more than three (3) years without
renewal, and the current approval for
this collection is scheduled to expire on
August 31, 2017. The DOL seeks to
extend PRA authorization for this
information collection for three (3) more
years, without any change to existing
requirements. The DOL notes that
existing information collection
requirements submitted to the OMB
receive a month-to-month extension
while they undergo review. For
additional substantive information
about this ICR, see the related notice
published in the Federal Register on
March 22, 2017 (82 FR 14752).
Interested parties are encouraged to
send comments to the OMB, Office of
Information and Regulatory Affairs at
the address shown in the ADDRESSES
section within thirty (30) days of
publication of this notice in the Federal
Register. In order to help ensure
appropriate consideration, comments
should mention OMB Control Number
1219–0046. The OMB is particularly
interested in comments that:
• Evaluate whether the proposed
collection of information is necessary
for the proper performance of the
functions of the agency, including
whether the information will have
practical utility;
• Evaluate the accuracy of the
agency’s estimate of the burden of the
proposed collection of information,
including the validity of the
methodology and assumptions used;
• Enhance the quality, utility, and
clarity of the information to be
collected; and
• Minimize the burden of the
collection of information on those who
PO 00000
Frm 00086
Fmt 4703
Sfmt 4703
are to respond, including through the
use of appropriate automated,
electronic, mechanical, or other
technological collection techniques or
other forms of information technology,
e.g., permitting electronic submission of
responses.
Agency: DOL–MSHA.
Title of Collection: Escape and
Evacuation Plans.
OMB Control Number: 1219–0046.
Affected Public: Private Sector—
businesses or other for-profits.
Total Estimated Number of
Respondents: 231.
Total Estimated Number of
Responses: 462.
Total Estimated Annual Time Burden:
3,927 hours.
Total Estimated Annual Other Costs
Burden: $2,310.
Authority: 44 U.S.C. 3507(a)(1)(D).
Dated: August 24, 2017.
Michel Smyth,
Departmental Clearance Officer.
[FR Doc. 2017–18434 Filed 8–29–17; 8:45 am]
BILLING CODE 4510–43–P
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2007–0039]
Intertek Testing Services NA, Inc.:
Application for Expansion of
Recognition
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Notice.
AGENCY:
In this notice, OSHA
announces the application of Intertek
Testing Services NA, Inc. for expansion
of its recognition as a Nationally
Recognized Testing Laboratory (NRTL)
and presents the Agency’s preliminary
finding to grant the application.
DATES: Submit comments, information,
and documents in response to this
notice, or requests for an extension of
time to make a submission, on or before
September 14, 2017.
ADDRESSES: Submit comments by any of
the following methods:
1. Electronically: Submit comments
and attachments electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for making
electronic submissions.
2. Facsimile: If submissions,
including attachments, are not longer
than 10 pages, commenters may fax
them to the OSHA Docket Office at (202)
693–1648.
SUMMARY:
E:\FR\FM\30AUN1.SGM
30AUN1
Federal Register / Vol. 82, No. 167 / Wednesday, August 30, 2017 / Notices
3. Regular or express mail, hand
delivery, or messenger (courier) service:
Submit comments, requests, and any
attachments to the OSHA Docket Office,
Docket No. OSHA–2007–0039,
Technical Data Center, U.S. Department
of Labor, 200 Constitution Avenue NW.,
Room N–3508, Washington, DC 20210;
telephone: (202) 693–2350 (TTY
number: (877) 889–5627). Note that
security procedures may result in
significant delays in receiving
comments and other written materials
by regular mail. Contact the OSHA
Docket Office for information about
security procedures concerning delivery
of materials by express mail, hand
delivery, or messenger service. The
hours of operation for the OSHA Docket
Office are 10:00 a.m.–2:30 p.m., e.t.
4. Instructions: All submissions must
include the Agency name and the OSHA
docket number (OSHA–2007–0039).
OSHA places comments and other
materials, including any personal
information, in the public docket
without revision, and these materials
will be available online at https://
www.regulations.gov. Therefore, the
Agency cautions commenters about
submitting statements they do not want
made available to the public, or
submitting comments that contain
personal information (either about
themselves or others) such as Social
Security numbers, birth dates, and
medical data.
5. Docket: To read or download
submissions or other material in the
docket, go to https://www.regulations.gov
or the OSHA Docket Office at the
address above. All documents in the
docket are listed in the https://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download through the Web site.
All submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
Contact the OSHA Docket Office for
assistance in locating docket
submissions.
6. Extension of comment period:
Submit requests for an extension of the
comment period on or before September
14, 2017 to the Office of Technical
Programs and Coordination Activities,
Directorate of Technical Support and
Emergency Management, Occupational
Safety and Health Administration, U.S.
Department of Labor, 200 Constitution
Avenue NW., Room N–3655,
Washington, DC 20210, or by fax to
(202) 693–1644.
FOR FURTHER INFORMATION CONTACT:
Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank
Meilinger, Director, OSHA Office of
Communications, U.S. Department of
Labor, 200 Constitution Avenue NW.,
Room N–3647, Washington, DC 20210;
telephone: (202) 693–1999; email:
Meilinger.francis2@dol.gov.
General and technical information:
Contact Mr. Kevin Robinson, Director,
Office of Technical Programs and
Coordination Activities, Directorate of
Technical Support and Emergency
Management, Occupational Safety and
Health Administration, U.S. Department
of Labor, 200 Constitution Avenue NW.,
Room N–3655, Washington, DC 20210;
phone: (202) 693–2110 or email:
robinson.kevin@dol.gov.
SUPPLEMENTARY INFORMATION:
I. Notice of the Application for
Expansion
The Occupational Safety and Health
Administration is providing notice that
Intertek Testing Services NA, Inc.
(ITSNA), is applying for expansion of its
current recognition as a NRTL. ITSNA
requests the addition of seven test
standards to its NRTL scope of
recognition.
OSHA recognition of a NRTL signifies
that the organization meets the
requirements specified in 29 CFR
1910.7. Recognition is an
acknowledgment that the organization
can perform independent safety testing
and certification of the specific products
covered within its scope of recognition.
Each NRTL’s scope of recognition
includes (1) the type of products the
NRTL may test, with each type specified
by its applicable test standard; and (2)
the recognized site(s) that has/have the
technical capability to perform the
41293
product-testing and productcertification activities for test standards
within the NRTL’s scope. Recognition is
not a delegation or grant of government
authority; however, recognition enables
employers to use products approved by
the NRTL to meet OSHA standards that
require product testing and certification.
The Agency processes applications by
a NRTL for initial recognition and for an
expansion or renewal of this
recognition, following requirements in
Appendix A to 29 CFR 1910.7. This
appendix requires that the Agency
publish two notices in the Federal
Register in processing an application. In
the first notice, OSHA announces the
application and provides its preliminary
finding. In the second notice, the
Agency provides its final decision on
the application. These notices set forth
the NRTL’s scope of recognition or
modifications of that scope. OSHA
maintains an informational Web page
for each NRTL, including ITSNA, which
details the NRTL’s scope of recognition.
These pages are available from the
OSHA Web site at https://www.osha.gov/
dts/otpca/nrtl/.
ITSNA currently has fourteen
facilities (sites) recognized by OSHA for
product testing and certification, with
its headquarters located at: Intertek
Testing Services NA, Inc., 545 East
Algonquin Road, Suite F, Arlington
Heights, Illinois 60005. A complete list
of ITSNA’s scope of recognition is
available at https://www.osha.gov/dts/
otpca/nrtl/its.html.
II. General Background on the
Application
ITSNA submitted an application,
dated April 21, 2015 (OSHA–2007–
0039–0026), to expand its recognition to
include seven additional test standards.
OSHA staff performed detailed analysis
of the application packet and reviewed
other pertinent information. OSHA did
not perform any on-site reviews in
relation to this application.
Table 1 below lists the appropriate
test standards found in ITSNA’s
application for expansion for testing and
certification of products under the
NRTL Program.
mstockstill on DSK30JT082PROD with NOTICES
TABLE 1—PROPOSED LIST OF APPROPRIATE TEST STANDARDS FOR INCLUSION IN ITSNA’S NRTL SCOPE OF
RECOGNITION
Test Standard
UL
UL
UL
UL
UL
UL
109 ...........
979 ...........
1429 .........
1441 .........
2420 .........
2515 .........
VerDate Sep<11>2014
Test Standard Title
Tube Fittings for Flammable and Combustible Fluids, Refrigeration Service and Marine Use.
Water Treatment Appliances.
Pullout Switches.
Coated Electrical Sleeving.
Belowground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings.
Aboveground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings.
17:40 Aug 29, 2017
Jkt 241001
PO 00000
Frm 00087
Fmt 4703
Sfmt 4703
E:\FR\FM\30AUN1.SGM
30AUN1
41294
Federal Register / Vol. 82, No. 167 / Wednesday, August 30, 2017 / Notices
TABLE 1—PROPOSED LIST OF APPROPRIATE TEST STANDARDS FOR INCLUSION IN ITSNA’S NRTL SCOPE OF
RECOGNITION—Continued
Test Standard
UL 60950–21
Test Standard Title
Information Technology Equipment—Safety—Part 21: Remote Power Feeding.
mstockstill on DSK30JT082PROD with NOTICES
III. Preliminary Findings on the
Application
ITSNA submitted an acceptable
application for expansion of its scope of
recognition. OSHA’s review of the
application file, and pertinent
documentation, indicate that ITSNA can
meet the requirements prescribed by 29
CFR 1910.7 for expanding its
recognition to include the addition of
these seven test standards for NRTL
testing and certification listed above.
This preliminary finding does not
constitute an interim or temporary
approval of ITSNA’s application.
OSHA welcomes public comment as
to whether ITSNA meets the
requirements of 29 CFR 1910.7 for
expansion of its recognition as a NRTL.
Comments should consist of pertinent
written documents and exhibits.
Commenters needing more time to
comment must submit a request in
writing, stating the reasons for the
request. Commenters must submit the
written request for an extension by the
due date for comments. OSHA will limit
any extension to 10 days unless the
requester justifies a longer period.
OSHA may deny a request for an
extension if the request is not
adequately justified. To obtain or review
copies of the exhibits identified in this
notice, as well as comments submitted
to the docket, contact the Docket Office,
Room N–3508, Occupational Safety and
Health Administration, U.S. Department
of Labor, at the above address. These
materials also are available online at
https://www.regulations.gov under
Docket No. OSHA–2007–0039.
OSHA staff will review all comments
to the docket submitted in a timely
manner and, after addressing the issues
raised by these comments, will
recommend to the Assistant Secretary
for Occupational Safety and Health
whether to grant ITSNA’s application
for expansion of its scope of recognition.
The Assistant Secretary will make the
final decision on granting the
application. In making this decision, the
Assistant Secretary may undertake other
proceedings prescribed in Appendix A
to 29 CFR 1910.7.
OSHA will publish a public notice of
its final decision in the Federal
Register.
VerDate Sep<11>2014
17:40 Aug 29, 2017
Jkt 241001
IV. Authority and Signature
Loren Sweatt, Deputy Assistant
Secretary of Labor for Occupational
Safety and Health, authorized the
preparation of this notice. Accordingly,
the Agency is issuing this notice
pursuant to 29 U.S.C. 657(g)(2),
Secretary of Labor’s Order No. 1–2012
(77 FR 3912, Jan. 25, 2012), and 29 CFR
1910.7.
Signed at Washington, DC, on August 22,
2017.
Loren Sweatt,
Deputy Assistant Secretary of Labor for
Occupational Safety and Health.
[FR Doc. 2017–18428 Filed 8–29–17; 8:45 am]
BILLING CODE 4510–26–P
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2011–0056]
Voluntary Protection Programs
Information; Extension of the Office of
Management and Budget’s (OMB)
Approval of Information Collection
(Paperwork) Requirements
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comments.
AGENCY:
OSHA solicits public
comments concerning its proposal to
extend the Office of Management and
Budget’s (OMB) approval of the
information collection requirements
contained in Voluntary Protection
Programs Information.
DATES: Comments must be submitted
(postmarked, sent, or received) by
October 30, 2017.
ADDRESSES:
Electronically: You may submit
comments and attachments
electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for submitting
comments.
Facsimile: If your comments,
including attachments, are not longer
than 10 pages, you may fax them to the
OSHA Docket Office at (202) 693–1648.
Mail, hand delivery, express mail,
messenger, or courier service: When
using this method, you must submit a
SUMMARY:
PO 00000
Frm 00088
Fmt 4703
Sfmt 4703
copy of your comments and attachments
to the OSHA Docket Office, OSHA
Docket No. OSHA–2011–0056 U.S.
Department of Labor, Occupational
Safety and Health Administration,
Room N–3653, 200 Constitution Avenue
NW., Washington, DC 20210. Deliveries
(hand, express mail, messenger, and
courier service) are accepted during the
Department of Labor’s and Docket
Office’s normal business hours, 10:00
a.m. to 3:00 p.m., e.t.
Instructions: All submissions must
include the Agency name and OSHA
docket number for the Information
Collection Request (ICR) (OSHA–2011–
0056). All comments, including any
personal information you provide, are
placed in the public docket without
change, and may be made available
online at https://www.regulations.gov.
For further information on submitting
comments, see the ‘‘Public
Participation’’ heading in the section of
this notice titled SUPPLEMENTARY
INFORMATION.
Docket: To read or download
comments or other material in the
docket, go to https://www.regulations.gov
or the OSHA Docket Office at the
address above. All documents in the
docket (including this Federal Register
notice) are listed in the https://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download through the Web site.
All submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
FOR FURTHER INFORMATION CONTACT:
David Hamel, Director, Office of
Partnerships and Recognition,
Directorate of Cooperative and State
Programs, OSHA, U.S. Department of
Labor, Room N–3700, 200 Constitution
Avenue NW,, Washington, DC 20210;
telephone (202) 693–2213.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of its
continuing effort to reduce paperwork
and respondent (i.e., employer) burden,
conducts a preclearance consultation
program to provide the public with an
opportunity to comment on proposed
and continuing information collection
requirements in accordance with the
Paperwork Reduction Act of 1995 (PRA
E:\FR\FM\30AUN1.SGM
30AUN1
Agencies
[Federal Register Volume 82, Number 167 (Wednesday, August 30, 2017)]
[Notices]
[Pages 41292-41294]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-18428]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2007-0039]
Intertek Testing Services NA, Inc.: Application for Expansion of
Recognition
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: In this notice, OSHA announces the application of Intertek
Testing Services NA, Inc. for expansion of its recognition as a
Nationally Recognized Testing Laboratory (NRTL) and presents the
Agency's preliminary finding to grant the application.
DATES: Submit comments, information, and documents in response to this
notice, or requests for an extension of time to make a submission, on
or before September 14, 2017.
ADDRESSES: Submit comments by any of the following methods:
1. Electronically: Submit comments and attachments electronically
at https://www.regulations.gov, which is the Federal eRulemaking Portal.
Follow the instructions online for making electronic submissions.
2. Facsimile: If submissions, including attachments, are not longer
than 10 pages, commenters may fax them to the OSHA Docket Office at
(202) 693-1648.
[[Page 41293]]
3. Regular or express mail, hand delivery, or messenger (courier)
service: Submit comments, requests, and any attachments to the OSHA
Docket Office, Docket No. OSHA-2007-0039, Technical Data Center, U.S.
Department of Labor, 200 Constitution Avenue NW., Room N-3508,
Washington, DC 20210; telephone: (202) 693-2350 (TTY number: (877) 889-
5627). Note that security procedures may result in significant delays
in receiving comments and other written materials by regular mail.
Contact the OSHA Docket Office for information about security
procedures concerning delivery of materials by express mail, hand
delivery, or messenger service. The hours of operation for the OSHA
Docket Office are 10:00 a.m.-2:30 p.m., e.t.
4. Instructions: All submissions must include the Agency name and
the OSHA docket number (OSHA-2007-0039). OSHA places comments and other
materials, including any personal information, in the public docket
without revision, and these materials will be available online at
https://www.regulations.gov. Therefore, the Agency cautions commenters
about submitting statements they do not want made available to the
public, or submitting comments that contain personal information
(either about themselves or others) such as Social Security numbers,
birth dates, and medical data.
5. Docket: To read or download submissions or other material in the
docket, go to https://www.regulations.gov or the OSHA Docket Office at
the address above. All documents in the docket are listed in the https://www.regulations.gov index; however, some information (e.g.,
copyrighted material) is not publicly available to read or download
through the Web site. All submissions, including copyrighted material,
are available for inspection and copying at the OSHA Docket Office.
Contact the OSHA Docket Office for assistance in locating docket
submissions.
6. Extension of comment period: Submit requests for an extension of
the comment period on or before September 14, 2017 to the Office of
Technical Programs and Coordination Activities, Directorate of
Technical Support and Emergency Management, Occupational Safety and
Health Administration, U.S. Department of Labor, 200 Constitution
Avenue NW., Room N-3655, Washington, DC 20210, or by fax to (202) 693-
1644.
FOR FURTHER INFORMATION CONTACT: Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office
of Communications, U.S. Department of Labor, 200 Constitution Avenue
NW., Room N-3647, Washington, DC 20210; telephone: (202) 693-1999;
email: Meilinger.francis2@dol.gov.
General and technical information: Contact Mr. Kevin Robinson,
Director, Office of Technical Programs and Coordination Activities,
Directorate of Technical Support and Emergency Management, Occupational
Safety and Health Administration, U.S. Department of Labor, 200
Constitution Avenue NW., Room N-3655, Washington, DC 20210; phone:
(202) 693-2110 or email: robinson.kevin@dol.gov.
SUPPLEMENTARY INFORMATION:
I. Notice of the Application for Expansion
The Occupational Safety and Health Administration is providing
notice that Intertek Testing Services NA, Inc. (ITSNA), is applying for
expansion of its current recognition as a NRTL. ITSNA requests the
addition of seven test standards to its NRTL scope of recognition.
OSHA recognition of a NRTL signifies that the organization meets
the requirements specified in 29 CFR 1910.7. Recognition is an
acknowledgment that the organization can perform independent safety
testing and certification of the specific products covered within its
scope of recognition. Each NRTL's scope of recognition includes (1) the
type of products the NRTL may test, with each type specified by its
applicable test standard; and (2) the recognized site(s) that has/have
the technical capability to perform the product-testing and product-
certification activities for test standards within the NRTL's scope.
Recognition is not a delegation or grant of government authority;
however, recognition enables employers to use products approved by the
NRTL to meet OSHA standards that require product testing and
certification.
The Agency processes applications by a NRTL for initial recognition
and for an expansion or renewal of this recognition, following
requirements in Appendix A to 29 CFR 1910.7. This appendix requires
that the Agency publish two notices in the Federal Register in
processing an application. In the first notice, OSHA announces the
application and provides its preliminary finding. In the second notice,
the Agency provides its final decision on the application. These
notices set forth the NRTL's scope of recognition or modifications of
that scope. OSHA maintains an informational Web page for each NRTL,
including ITSNA, which details the NRTL's scope of recognition. These
pages are available from the OSHA Web site at https://www.osha.gov/dts/otpca/nrtl/.
ITSNA currently has fourteen facilities (sites) recognized by OSHA
for product testing and certification, with its headquarters located
at: Intertek Testing Services NA, Inc., 545 East Algonquin Road, Suite
F, Arlington Heights, Illinois 60005. A complete list of ITSNA's scope
of recognition is available at https://www.osha.gov/dts/otpca/nrtl/its.html.
II. General Background on the Application
ITSNA submitted an application, dated April 21, 2015 (OSHA-2007-
0039-0026), to expand its recognition to include seven additional test
standards. OSHA staff performed detailed analysis of the application
packet and reviewed other pertinent information. OSHA did not perform
any on-site reviews in relation to this application.
Table 1 below lists the appropriate test standards found in ITSNA's
application for expansion for testing and certification of products
under the NRTL Program.
Table 1--Proposed List of Appropriate Test Standards for Inclusion in
ITSNA's NRTL Scope of Recognition
------------------------------------------------------------------------
Test Standard Test Standard Title
------------------------------------------------------------------------
UL 109.......................... Tube Fittings for Flammable and
Combustible Fluids, Refrigeration
Service and Marine Use.
UL 979.......................... Water Treatment Appliances.
UL 1429......................... Pullout Switches.
UL 1441......................... Coated Electrical Sleeving.
UL 2420......................... Belowground Reinforced Thermosetting
Resin Conduit (RTRC) and Fittings.
UL 2515......................... Aboveground Reinforced Thermosetting
Resin Conduit (RTRC) and Fittings.
[[Page 41294]]
UL 60950-21..................... Information Technology Equipment--
Safety--Part 21: Remote Power
Feeding.
------------------------------------------------------------------------
III. Preliminary Findings on the Application
ITSNA submitted an acceptable application for expansion of its
scope of recognition. OSHA's review of the application file, and
pertinent documentation, indicate that ITSNA can meet the requirements
prescribed by 29 CFR 1910.7 for expanding its recognition to include
the addition of these seven test standards for NRTL testing and
certification listed above. This preliminary finding does not
constitute an interim or temporary approval of ITSNA's application.
OSHA welcomes public comment as to whether ITSNA meets the
requirements of 29 CFR 1910.7 for expansion of its recognition as a
NRTL. Comments should consist of pertinent written documents and
exhibits. Commenters needing more time to comment must submit a request
in writing, stating the reasons for the request. Commenters must submit
the written request for an extension by the due date for comments. OSHA
will limit any extension to 10 days unless the requester justifies a
longer period. OSHA may deny a request for an extension if the request
is not adequately justified. To obtain or review copies of the exhibits
identified in this notice, as well as comments submitted to the docket,
contact the Docket Office, Room N-3508, Occupational Safety and Health
Administration, U.S. Department of Labor, at the above address. These
materials also are available online at https://www.regulations.gov under
Docket No. OSHA-2007-0039.
OSHA staff will review all comments to the docket submitted in a
timely manner and, after addressing the issues raised by these
comments, will recommend to the Assistant Secretary for Occupational
Safety and Health whether to grant ITSNA's application for expansion of
its scope of recognition. The Assistant Secretary will make the final
decision on granting the application. In making this decision, the
Assistant Secretary may undertake other proceedings prescribed in
Appendix A to 29 CFR 1910.7.
OSHA will publish a public notice of its final decision in the
Federal Register.
IV. Authority and Signature
Loren Sweatt, Deputy Assistant Secretary of Labor for Occupational
Safety and Health, authorized the preparation of this notice.
Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C.
657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25,
2012), and 29 CFR 1910.7.
Signed at Washington, DC, on August 22, 2017.
Loren Sweatt,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2017-18428 Filed 8-29-17; 8:45 am]
BILLING CODE 4510-26-P