Finished Carbon Steel Flanges From Spain, 27075 [2017-12159]

Download as PDF Federal Register / Vol. 82, No. 112 / Tuesday, June 13, 2017 / Notices your entire comment—including your personal identifying information—may be made publicly available at any time. While you can ask us in your comment to withhold your personal identifying information from public review, we cannot guarantee that we will be able to do so. Authority We provide this notice under section 10 of the Act (16 U.S.C. 1531 et seq.). Dated: March 28, 2017. Nicole Alt, Deputy Assistant Regional Director, Mountain-Prairie Region. [FR Doc. 2017–12178 Filed 6–12–17; 8:45 am] BILLING CODE 4333–15–P is depicted on Map No. 634/129,621, dated June 2016. 54 U.S.C. 100506(c) provides that, after notifying the House Committee on Natural Resources and the Senate Committee on Energy and Natural Resources, the Secretary of the Interior is authorized to make this boundary revision upon publication of notice in the Federal Register. The Committees have been notified of this boundary revision. This boundary revision and subsequent acquisition will contribute to the protection of local watersheds, add valuable plant and wildlife habitat, and increase recreational opportunities, as well as contribute to the preservation of the scenic character of the area. Dated: December 2, 2016. Cameron H. Sholly, Regional Director, Midwest Region. DEPARTMENT OF THE INTERIOR Editorial Note: The Office of the Federal Register received this document on June 7, 2017. National Park Service [NPS–MWR–SLBE–22512; PS.SMWLA0058.00.1] [FR Doc. 2017–12150 Filed 6–12–17; 8:45 am] BILLING CODE 4312–52–P Minor Boundary Revision at Sleeping Bear Dunes National Lakeshore National Park Service, Interior. ACTION: Notification of boundary revision. INTERNATIONAL TRADE COMMISSION The boundary of Sleeping Bear Dunes National Lakeshore is modified to include 46 acres of land located in Benzie County, Michigan, immediately adjacent to the boundary of the national lakeshore. The United States will purchase, from willing sellers, two parcels containing 45 acres of land. The third parcel contains one acre and will be acquired by donation. DATES: The effective date of this boundary revision is June 13, 2017. ADDRESSES: The map depicting this boundary revision is available for inspection at the following locations: National Park Service, Land Resources Program Center, Midwest Region, 601 Riverfront Drive, Omaha, Nebraska 68102 and National Park Service, Department of the Interior, 1849 C Street NW., Washington, DC 20240. FOR FURTHER INFORMATION CONTACT: Chief Realty Officer Daniel L. Betts, National Park Service, Land Resources Program Center, Midwest Region, 601 Riverfront Drive, Omaha, Nebraska 68102, telephone (402) 661–1780. SUPPLEMENTARY INFORMATION: Notice is hereby given that, pursuant to 54 U.S.C. 100506(c), the boundary of Sleeping Bear Dunes National Lakeshore is modified to include 46 acres of adjacent land identified as Tracts 46–162, 67– 161, and 67–162. The boundary revision Finished Carbon Steel Flanges From Spain AGENCY: nlaroche on DSK30NT082PROD with NOTICES SUMMARY: VerDate Sep<11>2014 14:58 Jun 12, 2017 Jkt 241001 [Investigation No. 731–TA–1333 (Final)] Determination On the basis of the record 1 developed in the subject investigation, the United States International Trade Commission (‘‘Commission’’) determines,2 pursuant to the Tariff Act of 1930 (‘‘the Act’’), that an industry in the United States is materially injured by reason of imports of finished carbon steel flanges from Spain, provided for in subheading 7307.91.50 of the Harmonized Tariff Schedule of the United States, that have been found by the Department of Commerce (‘‘Commerce’’) to be sold in the United States at less than fair value (‘‘LTFV’’). Background The Commission, pursuant to section 735(b) of the Act (19 U.S.C. 1673d(b)), instituted this investigation effective June 30, 2016, following receipt of a petition filed with the Commission and Commerce by Weldbend Corporation, Argo, Illinois and Boltex Mfg. Co., L.P., Houston, Texas. The final phase of this investigation was scheduled by the 1 The record is defined in sec. 207.2(f) of the Commission’s Rules of Practice and Procedure (19 CFR 207.2(f)). 2 Commissioner F. Scott Kieff did not participate in the vote. PO 00000 Frm 00040 Fmt 4703 Sfmt 4703 27075 Commission following notification of a preliminary determination by Commerce that imports of finished carbon steel flanges from Spain were sold at LTFV within the meaning of 733(b) of the Act (19 U.S.C. 1673b(b)). Notice of the scheduling of the final phase of the Commission’s investigation and of a public hearing to be held in connection therewith was given by posting copies of the notice in the Office of the Secretary, U.S. International Trade Commission, Washington, DC, and by publishing the notice in the Federal Register on February 17, 2017 (82 FR 11056). The hearing was held in Washington, DC, on April 25, 2017, and all persons who requested the opportunity were permitted to appear in person or by counsel. The Commission made this determination pursuant to section 735(b) of the Act (19 U.S.C. 1673d(b)). It completed and filed its determination in this investigation on June 7, 2017. The views of the Commission are contained in USITC Publication 4696 (June 2017), entitled Finished Carbon Steel Flanges from Spain: Investigation No. 731–TA–1333 (Final). By order of the Commission. Issued: June 7, 2017. Lisa R. Barton, Secretary to the Commission. [FR Doc. 2017–12159 Filed 6–12–17; 8:45 am] BILLING CODE 7020–02–P INTERNATIONAL TRADE COMMISSION [Investigation No. TA–201–76] Large Residential Washers; Institution and Scheduling of Safeguard Investigation and Determination That the Investigation Is Extraordinarily Complicated United States International Trade Commission. ACTION: Notice of institution of investigation and scheduling of public hearings. AGENCY: Following receipt of a petition for import relief, as amended and properly filed on June 5, 2017, the Commission has instituted investigation No. TA–201–76 pursuant to section 202 of the Trade Act of 1974 (‘‘the Act’’) to determine whether large residential washers (‘‘LRWs’’) are being imported into the United States in such increased quantities as to be a substantial cause of serious injury, or the threat thereof, to the domestic industry producing an article like or directly competitive with the imported articles. The Commission SUMMARY: E:\FR\FM\13JNN1.SGM 13JNN1

Agencies

[Federal Register Volume 82, Number 112 (Tuesday, June 13, 2017)]
[Notices]
[Page 27075]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-12159]


=======================================================================
-----------------------------------------------------------------------

INTERNATIONAL TRADE COMMISSION

[Investigation No. 731-TA-1333 (Final)]


Finished Carbon Steel Flanges From Spain

Determination

    On the basis of the record \1\ developed in the subject 
investigation, the United States International Trade Commission 
(``Commission'') determines,\2\ pursuant to the Tariff Act of 1930 
(``the Act''), that an industry in the United States is materially 
injured by reason of imports of finished carbon steel flanges from 
Spain, provided for in subheading 7307.91.50 of the Harmonized Tariff 
Schedule of the United States, that have been found by the Department 
of Commerce (``Commerce'') to be sold in the United States at less than 
fair value (``LTFV'').
---------------------------------------------------------------------------

    \1\ The record is defined in sec. 207.2(f) of the Commission's 
Rules of Practice and Procedure (19 CFR 207.2(f)).
    \2\ Commissioner F. Scott Kieff did not participate in the vote.
---------------------------------------------------------------------------

Background

    The Commission, pursuant to section 735(b) of the Act (19 U.S.C. 
1673d(b)), instituted this investigation effective June 30, 2016, 
following receipt of a petition filed with the Commission and Commerce 
by Weldbend Corporation, Argo, Illinois and Boltex Mfg. Co., L.P., 
Houston, Texas. The final phase of this investigation was scheduled by 
the Commission following notification of a preliminary determination by 
Commerce that imports of finished carbon steel flanges from Spain were 
sold at LTFV within the meaning of 733(b) of the Act (19 U.S.C. 
1673b(b)). Notice of the scheduling of the final phase of the 
Commission's investigation and of a public hearing to be held in 
connection therewith was given by posting copies of the notice in the 
Office of the Secretary, U.S. International Trade Commission, 
Washington, DC, and by publishing the notice in the Federal Register on 
February 17, 2017 (82 FR 11056). The hearing was held in Washington, 
DC, on April 25, 2017, and all persons who requested the opportunity 
were permitted to appear in person or by counsel.
    The Commission made this determination pursuant to section 735(b) 
of the Act (19 U.S.C. 1673d(b)). It completed and filed its 
determination in this investigation on June 7, 2017. The views of the 
Commission are contained in USITC Publication 4696 (June 2017), 
entitled Finished Carbon Steel Flanges from Spain: Investigation No. 
731-TA-1333 (Final).

    By order of the Commission.

    Issued: June 7, 2017.
Lisa R. Barton,
Secretary to the Commission.
[FR Doc. 2017-12159 Filed 6-12-17; 8:45 am]
 BILLING CODE 7020-02-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.