Certain Welded Stainless Steel Pipe From Korea and Taiwan; Institution of Five-Year Reviews, 75845-75848 [2016-26267]
Download as PDF
asabaliauskas on DSK3SPTVN1PROD with NOTICES
Federal Register / Vol. 81, No. 211 / Tuesday, November 1, 2016 / Notices
(10) If you are a U.S. importer or a
trade/business association of U.S.
importers of the Subject Merchandise
from any Subject Country, provide the
following information on your firm’s(s’)
operations on that product during
calendar year 2015 (report quantity data
in short tons and value data in U.S.
dollars). If you are a trade/business
association, provide the information, on
an aggregate basis, for the firms which
are members of your association.
(a) The quantity and value (landed,
duty-paid but not including
antidumping duties) of U.S. imports
and, if known, an estimate of the
percentage of total U.S. imports of
Subject Merchandise from each Subject
Country accounted for by your firm’s(s’)
imports;
(b) the quantity and value (f.o.b. U.S.
port, including antidumping duties) of
U.S. commercial shipments of Subject
Merchandise imported from each
Subject Country; and
(c) the quantity and value (f.o.b. U.S.
port, including antidumping duties) of
U.S. internal consumption/company
transfers of Subject Merchandise
imported from each Subject Country.
(11) If you are a producer, an exporter,
or a trade/business association of
producers or exporters of the Subject
Merchandise in any Subject Country,
provide the following information on
your firm’s(s’) operations on that
product during calendar year 2015
(report quantity data in short tons and
value data in U.S. dollars, landed and
duty-paid at the U.S. port but not
including antidumping duties). If you
are a trade/business association, provide
the information, on an aggregate basis,
for the firms which are members of your
association.
(a) Production (quantity) and, if
known, an estimate of the percentage of
total production of Subject Merchandise
in each Subject Country accounted for
by your firm’s(s’) production;
(b) Capacity (quantity) of your firm(s)
to produce the Subject Merchandise in
each Subject Country (i.e., the level of
production that your establishment(s)
could reasonably have expected to
attain during the year, assuming normal
operating conditions (using equipment
and machinery in place and ready to
operate), normal operating levels (hours
per week/weeks per year), time for
downtime, maintenance, repair, and
cleanup, and a typical or representative
product mix); and
(c) the quantity and value of your
firm’s(s’) exports to the United States of
Subject Merchandise and, if known, an
estimate of the percentage of total
exports to the United States of Subject
VerDate Sep<11>2014
00:01 Nov 01, 2016
Jkt 241001
Merchandise from each Subject Country
accounted for by your firm’s(s’) exports.
(12) Identify significant changes, if
any, in the supply and demand
conditions or business cycle for the
Domestic Like Product that have
occurred in the United States or in the
market for the Subject Merchandise in
each Subject Country after 2010, and
significant changes, if any, that are
likely to occur within a reasonably
foreseeable time. Supply conditions to
consider include technology;
production methods; development
efforts; ability to increase production
(including the shift of production
facilities used for other products and the
use, cost, or availability of major inputs
into production); and factors related to
the ability to shift supply among
different national markets (including
barriers to importation in foreign
markets or changes in market demand
abroad). Demand conditions to consider
include end uses and applications; the
existence and availability of substitute
products; and the level of competition
among the Domestic Like Product
produced in the United States, Subject
Merchandise produced in each Subject
Country, and such merchandise from
other countries.
(13) (Optional) A statement of
whether you agree with the above
definitions of the Domestic Like Product
and Domestic Industry; if you disagree
with either or both of these definitions,
please explain why and provide
alternative definitions.
Authority: This proceeding is being
conducted under authority of title VII of the
Tariff Act of 1930; this notice is published
pursuant to section 207.61 of the
Commission’s rules.
By order of the Commission.
Issued: October 26, 2016.
Lisa R. Barton,
Secretary to the Commission.
[FR Doc. 2016–26264 Filed 10–31–16; 8:45 am]
BILLING CODE 7020–02–P
INTERNATIONAL TRADE
COMMISSION
[Investigation Nos. 731–TA–540–541 (Fourth
Review)]
Certain Welded Stainless Steel Pipe
From Korea and Taiwan; Institution of
Five-Year Reviews
United States International
Trade Commission.
ACTION: Notice.
AGENCY:
The Commission hereby gives
notice that it has instituted reviews
pursuant to the Tariff Act of 1930 (‘‘the
SUMMARY:
PO 00000
Frm 00041
Fmt 4703
Sfmt 4703
75845
Act’’), as amended, to determine
whether revocation of the antidumping
duty orders on certain welded stainless
steel pipe from Korea and Taiwan
would be likely to lead to continuation
or recurrence of material injury.
Pursuant to the Act, interested parties
are requested to respond to this notice
by submitting the information specified
below to the Commission.
DATES: Effective November 1, 2016. To
be assured of consideration, the
deadline for responses is December 1,
2016. Comments on the adequacy of
responses may be filed with the
Commission by January 13, 2017.
FOR FURTHER INFORMATION CONTACT:
Mary Messer (202–205–3193), Office of
Investigations, U.S. International Trade
Commission, 500 E Street SW.,
Washington, DC 20436. Hearingimpaired persons can obtain
information on this matter by contacting
the Commission’s TDD terminal on 202–
205–1810. Persons with mobility
impairments who will need special
assistance in gaining access to the
Commission should contact the Office
of the Secretary at 202–205–2000.
General information concerning the
Commission may also be obtained by
accessing its internet server (https://
www.usitc.gov). The public record for
this proceeding may be viewed on the
Commission’s electronic docket (EDIS)
at https://edis.usitc.gov.
SUPPLEMENTARY INFORMATION:
Background.—On December 30, 1992,
the Department of Commerce
(‘‘Commerce’’) issued antidumping duty
orders on imports of welded ASTM A–
312 stainless steel pipe from Korea (57
FR 62301) and Taiwan (57 FR 62300).
Following first five-year reviews by
Commerce and the Commission,
effective October 16, 2000, Commerce
issued a continuation of the
antidumping duty orders on imports of
certain welded stainless steel pipe from
Korea and Taiwan (65 FR 61143).
Following second five-year reviews by
Commerce and the Commission,
effective August 28, 2006, Commerce
issued a continuation of the
antidumping duty orders on imports of
welded ASTM A–312 stainless steel
pipe from Korea and Taiwan (71 FR
53412, September 11, 2006). Following
the third five-year reviews by Commerce
and the Commission, effective
December 19, 2011, Commerce issued a
continuation of the antidumping duty
orders on imports of welded ASTM A–
312 stainless steel pipe from Korea and
Taiwan (76 FR 78614). The Commission
is now conducting fourth reviews
pursuant to section 751(c) of the Act, as
amended (19 U.S.C. 1675(c)), to
E:\FR\FM\01NON1.SGM
01NON1
asabaliauskas on DSK3SPTVN1PROD with NOTICES
75846
Federal Register / Vol. 81, No. 211 / Tuesday, November 1, 2016 / Notices
determine whether revocation of the
orders would be likely to lead to
continuation or recurrence of material
injury to the domestic industry within
a reasonably foreseeable time.
Provisions concerning the conduct of
this proceeding may be found in the
Commission’s Rules of Practice and
Procedure at 19 CFR parts 201, subparts
A and B and 19 CFR part 207, subparts
A and F. The Commission will assess
the adequacy of interested party
responses to this notice of institution to
determine whether to conduct full or
expedited reviews. The Commission’s
determinations in any expedited
reviews will be based on the facts
available, which may include
information provided in response to this
notice.
Definitions.—The following
definitions apply to these reviews:
(1) Subject Merchandise is the class or
kind of merchandise that is within the
scope of the five-year reviews, as
defined by the Department of
Commerce.
(2) The Subject Countries in these
reviews are Korea and Taiwan.
(3) The Domestic Like Product is the
domestically produced product or
products which are like, or in the
absence of like, most similar in
characteristics and uses with, the
Subject Merchandise. In its original
determinations and full first five-year
review determinations, the Commission
defined the Domestic Like Product as all
welded stainless steel pipes and
pressure tubes, excluding grade 409
tubes and mechanical tubes (also known
as ornamental tubes). Thus, in addition
to welded ASTM A–312 stainless steel
pipe, the Domestic Like Product
included such tubular products as
ASTM A–778 and A–358 pipes and
ASTM A–249, A–269, and A–270
pressure tubes. In its full second fiveyear review determinations and its
expedited third five-year review
determinations, the Commission found
that a change from the original
definition of the Domestic Like Product
was appropriate and defined the
Domestic Like Product as only welded
ASTM A–312 and A–778 stainless steel
pipes. For purposes of responding to
this notice of institution in these fourth
five-year reviews, please provide the
requested information based on the
Commission’s most recent Domestic
Like Product determinations: Welded
ASTM A–312 and A–778 stainless steel
pipes.
(4) The Domestic Industry is the U.S.
producers as a whole of the Domestic
Like Product, or those producers whose
collective output of the Domestic Like
Product constitutes a major proportion
VerDate Sep<11>2014
00:01 Nov 01, 2016
Jkt 241001
of the total domestic production of the
product. In its original determinations
and its full first five-year review
determinations, the Commission
defined the Domestic Industry as
producers of welded stainless steel
pipes and pressure tubes, excluding
grade 409 tubes and mechanical tubes
(also known as ornamental tubes). In its
full second five-year review
determinations and its expedited third
five-year review determinations, the
Commission defined the Domestic
Industry as all U.S. producers of welded
ASTM A–312 and A–778 stainless steel
pipes. For purposes of responding to
this notice of institution in these third
five-year reviews, please provide the
requested information based on the
Commission’s most recent Domestic
Industry determinations: All domestic
producers of welded ASTM A–312 and
A–778 stainless steel pipes.
(5) An Importer is any person or firm
engaged, either directly or through a
parent company or subsidiary, in
importing the Subject Merchandise into
the United States from a foreign
manufacturer or through its selling
agent.
Participation in the proceeding and
public service list.—Persons, including
industrial users of the Subject
Merchandise and, if the merchandise is
sold at the retail level, representative
consumer organizations, wishing to
participate in the proceeding as parties
must file an entry of appearance with
the Secretary to the Commission, as
provided in section 201.11(b)(4) of the
Commission’s rules, no later than 21
days after publication of this notice in
the Federal Register. The Secretary will
maintain a public service list containing
the names and addresses of all persons,
or their representatives, who are parties
to the proceeding.
Former Commission employees who
are seeking to appear in Commission
five-year reviews are advised that they
may appear in a review even if they
participated personally and
substantially in the corresponding
underlying original investigation or an
earlier review of the same underlying
investigation. The Commission’s
designated agency ethics official has
advised that a five-year review is not the
same particular matter as the underlying
original investigation, and a five-year
review is not the same particular matter
as an earlier review of the same
underlying investigation for purposes of
18 U.S.C. 207, the post employment
statute for Federal employees, and
Commission rule 201.15(b) (19 CFR
201.15(b)), 79 FR 3246 (Jan. 17, 2014),
73 FR 24609 (May 5, 2008).
Consequently, former employees are not
PO 00000
Frm 00042
Fmt 4703
Sfmt 4703
required to seek Commission approval
to appear in a review under Commission
rule 19 CFR 201.15, even if the
corresponding underlying original
investigation or an earlier review of the
same underlying investigation was
pending when they were Commission
employees. For further ethics advice on
this matter, contact Carol McCue
Verratti, Deputy Agency Ethics Official,
at 202–205–3088.
Limited disclosure of business
proprietary information (BPI) under an
administrative protective order (APO)
and APO service list.—Pursuant to
section 207.7(a) of the Commission’s
rules, the Secretary will make BPI
submitted in this proceeding available
to authorized applicants under the APO
issued in the proceeding, provided that
the application is made no later than 21
days after publication of this notice in
the Federal Register. Authorized
applicants must represent interested
parties, as defined in 19 U.S.C. 1677(9),
who are parties to the proceeding. A
separate service list will be maintained
by the Secretary for those parties
authorized to receive BPI under the
APO.
Certification.—Pursuant to section
207.3 of the Commission’s rules, any
person submitting information to the
Commission in connection with this
proceeding must certify that the
information is accurate and complete to
the best of the submitter’s knowledge. In
making the certification, the submitter
will acknowledge that information
submitted in response to this request for
information and throughout this
proceeding or other proceeding may be
disclosed to and used: (i) By the
Commission, its employees and Offices,
and contract personnel (a) for
developing or maintaining the records
of this or a related proceeding, or (b) in
internal investigations, audits, reviews,
and evaluations relating to the
programs, personnel, and operations of
the Commission including under 5
U.S.C. Appendix 3; or (ii) by U.S.
government employees and contract
personnel, solely for cybersecurity
purposes. All contract personnel will
sign appropriate nondisclosure
agreements.
Written submissions.—Pursuant to
section 207.61 of the Commission’s
rules, each interested party response to
this notice must provide the information
specified below. The deadline for filing
such responses is December 1, 2016.
Pursuant to section 207.62(b) of the
Commission’s rules, eligible parties (as
specified in Commission rule
207.62(b)(1)) may also file comments
concerning the adequacy of responses to
the notice of institution and whether the
E:\FR\FM\01NON1.SGM
01NON1
asabaliauskas on DSK3SPTVN1PROD with NOTICES
Federal Register / Vol. 81, No. 211 / Tuesday, November 1, 2016 / Notices
Commission should conduct expedited
or full reviews. The deadline for filing
such comments is January 13, 2017. All
written submissions must conform with
the provisions of section 201.8 of the
Commission’s rules; any submissions
that contain BPI must also conform with
the requirements of sections 201.6,
207.3, and 207.7 of the Commission’s
rules. The Commission’s Handbook on
E-Filing, available on the Commission’s
Web site at https://edis.usitc.gov,
elaborates upon the Commission’s rules
with respect to electronic filing. Also, in
accordance with sections 201.16(c) and
207.3 of the Commission’s rules, each
document filed by a party to the
proceeding must be served on all other
parties to the proceeding (as identified
by either the public or APO service list
as appropriate), and a certificate of
service must accompany the document
(if you are not a party to the proceeding
you do not need to serve your response).
No response to this request for
information is required if a currently
valid Office of Management and Budget
(OMB) number is not displayed; the
OMB number is 3117 0016/USITC No.
16–5–373, expiration date June 30,
2017. Public reporting burden for the
request is estimated to average 15 hours
per response. Please send comments
regarding the accuracy of this burden
estimate to the Office of Investigations,
U.S. International Trade Commission,
500 E Street SW., Washington, DC
20436.
Inability to provide requested
information.—Pursuant to section
207.61(c) of the Commission’s rules, any
interested party that cannot furnish the
information requested by this notice in
the requested form and manner shall
notify the Commission at the earliest
possible time, provide a full explanation
of why it cannot provide the requested
information, and indicate alternative
forms in which it can provide
equivalent information. If an interested
party does not provide this notification
(or the Commission finds the
explanation provided in the notification
inadequate) and fails to provide a
complete response to this notice, the
Commission may take an adverse
inference against the party pursuant to
section 776(b) of the Act (19 U.S.C.
1677e(b)) in making its determinations
in the reviews.
Information To Be Provided in
Response to This Notice of Institution: If
you are a domestic producer, union/
worker group, or trade/business
association; import/export Subject
Merchandise from more than one
Subject Country; or produce Subject
Merchandise in more than one Subject
Country, you may file a single response.
VerDate Sep<11>2014
00:01 Nov 01, 2016
Jkt 241001
If you do so, please ensure that your
response to each question includes the
information requested for each pertinent
Subject Country. As used below, the
term ‘‘firm’’ includes any related firms.
(1) The name and address of your firm
or entity (including World Wide Web
address) and name, telephone number,
fax number, and Email address of the
certifying official.
(2) A statement indicating whether
your firm/entity is an interested party
under 19 U.S.C. 1677(9) and if so, how,
including whether your firm/entity is a
U.S. producer of the Domestic Like
Product, a U.S. union or worker group,
a U.S. importer of the Subject
Merchandise, a foreign producer or
exporter of the Subject Merchandise, a
U.S. or foreign trade or business
association (a majority of whose
members are interested parties under
the statute), or another interested party
(including an explanation). If you are a
union/worker group or trade/business
association, identify the firms in which
your workers are employed or which are
members of your association.
(3) A statement indicating whether
your firm/entity is willing to participate
in this proceeding by providing
information requested by the
Commission.
(4) A statement of the likely effects of
the revocation of the antidumping duty
orders on the Domestic Industry in
general and/or your firm/entity
specifically. In your response, please
discuss the various factors specified in
section 752(a) of the Act (19 U.S.C.
1675a(a)) including the likely volume of
subject imports, likely price effects of
subject imports, and likely impact of
imports of Subject Merchandise on the
Domestic Industry.
(5) A list of all known and currently
operating U.S. producers of the
Domestic Like Product. Identify any
known related parties and the nature of
the relationship as defined in section
771(4)(B) of the Act (19 U.S.C.
1677(4)(B)).
(6) A list of all known and currently
operating U.S. importers of the Subject
Merchandise and producers of the
Subject Merchandise in each Subject
Country that currently export or have
exported Subject Merchandise to the
United States or other countries after
2010.
(7) A list of 3–5 leading purchasers in
the U.S. market for the Domestic Like
Product and the Subject Merchandise
(including street address, World Wide
Web address, and the name, telephone
number, fax number, and Email address
of a responsible official at each firm).
(8) A list of known sources of
information on national or regional
PO 00000
Frm 00043
Fmt 4703
Sfmt 4703
75847
prices for the Domestic Like Product or
the Subject Merchandise in the U.S. or
other markets.
(9) If you are a U.S. producer of the
Domestic Like Product, provide the
following information on your firm’s
operations on that product during
calendar year 2015, except as noted
(report quantity data in short tons and
value data in U.S. dollars, f.o.b. plant).
If you are a union/worker group or
trade/business association, provide the
information, on an aggregate basis, for
the firms in which your workers are
employed/which are members of your
association.
(a) Production (quantity) and, if
known, an estimate of the percentage of
total U.S. production of the Domestic
Like Product accounted for by your
firm’s(s’) production;
(b) Capacity (quantity) of your firm to
produce the Domestic Like Product (i.e.,
the level of production that your
establishment(s) could reasonably have
expected to attain during the year,
assuming normal operating conditions
(using equipment and machinery in
place and ready to operate), normal
operating levels (hours per week/weeks
per year), time for downtime,
maintenance, repair, and cleanup, and a
typical or representative product mix);
(c) the quantity and value of U.S.
commercial shipments of the Domestic
Like Product produced in your U.S.
plant(s);
(d) the quantity and value of U.S.
internal consumption/company
transfers of the Domestic Like Product
produced in your U.S. plant(s); and
(e) the value of (i) net sales, (ii) cost
of goods sold (COGS), (iii) gross profit,
(iv) selling, general and administrative
(SG&A) expenses, and (v) operating
income of the Domestic Like Product
produced in your U.S. plant(s) (include
both U.S. and export commercial sales,
internal consumption, and company
transfers) for your most recently
completed fiscal year (identify the date
on which your fiscal year ends).
(10) If you are a U.S. importer or a
trade/business association of U.S.
importers of the Subject Merchandise
from any Subject Country, provide the
following information on your firm’s(s’)
operations on that product during
calendar year 2015 (report quantity data
in short tons and value data in U.S.
dollars). If you are a trade/business
association, provide the information, on
an aggregate basis, for the firms which
are members of your association.
(a) The quantity and value (landed,
duty-paid but not including
antidumping duties) of U.S. imports
and, if known, an estimate of the
percentage of total U.S. imports of
E:\FR\FM\01NON1.SGM
01NON1
asabaliauskas on DSK3SPTVN1PROD with NOTICES
75848
Federal Register / Vol. 81, No. 211 / Tuesday, November 1, 2016 / Notices
Subject Merchandise from each Subject
Country accounted for by your firm’s(s’)
imports;
(b) the quantity and value (f.o.b. U.S.
port, including antidumping duties) of
U.S. commercial shipments of Subject
Merchandise imported from each
Subject Country; and
(c) the quantity and value (f.o.b. U.S.
port, including antidumping duties) of
U.S. internal consumption/company
transfers of Subject Merchandise
imported from each Subject Country.
(11) If you are a producer, an exporter,
or a trade/business association of
producers or exporters of the Subject
Merchandise in any Subject Country,
provide the following information on
your firm’s(s’) operations on that
product during calendar year 2015
(report quantity data in short tons and
value data in U.S. dollars, landed and
duty-paid at the U.S. port but not
including antidumping duties). If you
are a trade/business association, provide
the information, on an aggregate basis,
for the firms which are members of your
association.
(a) Production (quantity) and, if
known, an estimate of the percentage of
total production of Subject Merchandise
in each Subject Country accounted for
by your firm’s(s’) production;
(b) Capacity (quantity) of your firm(s)
to produce the Subject Merchandise in
each Subject Country (i.e., the level of
production that your establishment(s)
could reasonably have expected to
attain during the year, assuming normal
operating conditions (using equipment
and machinery in place and ready to
operate), normal operating levels (hours
per week/weeks per year), time for
downtime, maintenance, repair, and
cleanup, and a typical or representative
product mix); and
(c) the quantity and value of your
firm’s(s’) exports to the United States of
Subject Merchandise and, if known, an
estimate of the percentage of total
exports to the United States of Subject
Merchandise from each Subject Country
accounted for by your firm’s(s’) exports.
(12) Identify significant changes, if
any, in the supply and demand
conditions or business cycle for the
Domestic Like Product that have
occurred in the United States or in the
market for the Subject Merchandise in
each Subject Country after 2010, and
significant changes, if any, that are
likely to occur within a reasonably
foreseeable time. Supply conditions to
consider include technology;
production methods; development
efforts; ability to increase production
(including the shift of production
facilities used for other products and the
use, cost, or availability of major inputs
VerDate Sep<11>2014
00:01 Nov 01, 2016
Jkt 241001
into production); and factors related to
the ability to shift supply among
different national markets (including
barriers to importation in foreign
markets or changes in market demand
abroad). Demand conditions to consider
include end uses and applications; the
existence and availability of substitute
products; and the level of competition
among the Domestic Like Product
produced in the United States, Subject
Merchandise produced in each Subject
Country, and such merchandise from
other countries.
(13) (Optional) A statement of
whether you agree with the above
definitions of the Domestic Like Product
and Domestic Industry; if you disagree
with either or both of these definitions,
please explain why and provide
alternative definitions.
Authority: This proceeding is being
conducted under authority of title VII of the
Tariff Act of 1930; this notice is published
pursuant to section 207.61 of the
Commission’s rules.
By order of the Commission.
Issued: October 26, 2016.
Lisa R. Barton,
Secretary to the Commission.
[FR Doc. 2016–26267 Filed 10–31–16; 8:45 am]
BILLING CODE 7020–02–P
INTERNATIONAL TRADE
COMMISSION
[Investigation No. 731–TA–461 (Fourth
Review)]
Gray Portland Cement and Cement
Clinker From Japan; Institution of a
Five-Year Review
United States International
Trade Commission.
ACTION: Notice.
AGENCY:
The Commission hereby gives
notice that it has instituted a review
pursuant to the Tariff Act of 1930 (‘‘the
Act’’), as amended, to determine
whether revocation of the antidumping
duty order on gray portland cement and
cement clinker from Japan would be
likely to lead to continuation or
recurrence of material injury. Pursuant
to the Act, interested parties are
requested to respond to this notice by
submitting the information specified
below to the Commission.
DATES: Effective November 1, 2016. To
be assured of consideration, the
deadline for responses is December 1,
2016. Comments on the adequacy of
responses may be filed with the
Commission by January 13, 2017.
FOR FURTHER INFORMATION CONTACT:
Mary Messer (202–205–3193), Office of
SUMMARY:
PO 00000
Frm 00044
Fmt 4703
Sfmt 4703
Investigations, U.S. International Trade
Commission, 500 E Street SW.,
Washington, DC 20436. Hearingimpaired persons can obtain
information on this matter by contacting
the Commission’s TDD terminal on 202–
205–1810. Persons with mobility
impairments who will need special
assistance in gaining access to the
Commission should contact the Office
of the Secretary at 202–205–2000.
General information concerning the
Commission may also be obtained by
accessing its internet server (https://
www.usitc.gov). The public record for
this proceeding may be viewed on the
Commission’s electronic docket (EDIS)
at https://edis.usitc.gov.
SUPPLEMENTARY INFORMATION:
Background.— On May 10, 1991, the
Department of Commerce issued an
antidumping duty order on imports of
gray portland cement and cement
clinker from Japan (56 FR 21658).
Following first five-year reviews by
Commerce and the Commission,
effective November 15, 2000, Commerce
issued a continuation of the
antidumping duty order on imports of
gray portland cement and cement
clinker from Japan (65 FR 68979).
Following second five-year reviews by
Commerce and the Commission,
effective June 16, 2006, Commerce
issued a continuation of the
antidumping duty order on imports of
gray portland cement and cement
clinker from Japan (71 FR 34892).
Following the third five-year reviews by
Commerce and the Commission,
effective December 16, 2011, Commerce
issued a continuation of the
antidumping duty order on imports of
gray portland cement and cement
clinker from Japan (76 FR 78240). The
Commission is now conducting a fourth
review pursuant to section 751(c) of the
Act, as amended (19 U.S.C. 1675(c)), to
determine whether revocation of the
order would be likely to lead to
continuation or recurrence of material
injury to the domestic industry within
a reasonably foreseeable time.
Provisions concerning the conduct of
this proceeding may be found in the
Commission’s Rules of Practice and
Procedure at 19 CFR parts 201, subparts
A and B and 19 CFR part 207, subparts
A and F. The Commission will assess
the adequacy of interested party
responses to this notice of institution to
determine whether to conduct a full
review or an expedited review. The
Commission’s determination in any
expedited review will be based on the
facts available, which may include
information provided in response to this
notice.
E:\FR\FM\01NON1.SGM
01NON1
Agencies
[Federal Register Volume 81, Number 211 (Tuesday, November 1, 2016)]
[Notices]
[Pages 75845-75848]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-26267]
-----------------------------------------------------------------------
INTERNATIONAL TRADE COMMISSION
[Investigation Nos. 731-TA-540-541 (Fourth Review)]
Certain Welded Stainless Steel Pipe From Korea and Taiwan;
Institution of Five-Year Reviews
AGENCY: United States International Trade Commission.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: The Commission hereby gives notice that it has instituted
reviews pursuant to the Tariff Act of 1930 (``the Act''), as amended,
to determine whether revocation of the antidumping duty orders on
certain welded stainless steel pipe from Korea and Taiwan would be
likely to lead to continuation or recurrence of material injury.
Pursuant to the Act, interested parties are requested to respond to
this notice by submitting the information specified below to the
Commission.
DATES: Effective November 1, 2016. To be assured of consideration, the
deadline for responses is December 1, 2016. Comments on the adequacy of
responses may be filed with the Commission by January 13, 2017.
FOR FURTHER INFORMATION CONTACT: Mary Messer (202-205-3193), Office of
Investigations, U.S. International Trade Commission, 500 E Street SW.,
Washington, DC 20436. Hearing-impaired persons can obtain information
on this matter by contacting the Commission's TDD terminal on 202-205-
1810. Persons with mobility impairments who will need special
assistance in gaining access to the Commission should contact the
Office of the Secretary at 202-205-2000. General information concerning
the Commission may also be obtained by accessing its internet server
(https://www.usitc.gov). The public record for this proceeding may be
viewed on the Commission's electronic docket (EDIS) at https://edis.usitc.gov.
SUPPLEMENTARY INFORMATION:
Background.--On December 30, 1992, the Department of Commerce
(``Commerce'') issued antidumping duty orders on imports of welded ASTM
A-312 stainless steel pipe from Korea (57 FR 62301) and Taiwan (57 FR
62300). Following first five-year reviews by Commerce and the
Commission, effective October 16, 2000, Commerce issued a continuation
of the antidumping duty orders on imports of certain welded stainless
steel pipe from Korea and Taiwan (65 FR 61143). Following second five-
year reviews by Commerce and the Commission, effective August 28, 2006,
Commerce issued a continuation of the antidumping duty orders on
imports of welded ASTM A-312 stainless steel pipe from Korea and Taiwan
(71 FR 53412, September 11, 2006). Following the third five-year
reviews by Commerce and the Commission, effective December 19, 2011,
Commerce issued a continuation of the antidumping duty orders on
imports of welded ASTM A-312 stainless steel pipe from Korea and Taiwan
(76 FR 78614). The Commission is now conducting fourth reviews pursuant
to section 751(c) of the Act, as amended (19 U.S.C. 1675(c)), to
[[Page 75846]]
determine whether revocation of the orders would be likely to lead to
continuation or recurrence of material injury to the domestic industry
within a reasonably foreseeable time. Provisions concerning the conduct
of this proceeding may be found in the Commission's Rules of Practice
and Procedure at 19 CFR parts 201, subparts A and B and 19 CFR part
207, subparts A and F. The Commission will assess the adequacy of
interested party responses to this notice of institution to determine
whether to conduct full or expedited reviews. The Commission's
determinations in any expedited reviews will be based on the facts
available, which may include information provided in response to this
notice.
Definitions.--The following definitions apply to these reviews:
(1) Subject Merchandise is the class or kind of merchandise that is
within the scope of the five-year reviews, as defined by the Department
of Commerce.
(2) The Subject Countries in these reviews are Korea and Taiwan.
(3) The Domestic Like Product is the domestically produced product
or products which are like, or in the absence of like, most similar in
characteristics and uses with, the Subject Merchandise. In its original
determinations and full first five-year review determinations, the
Commission defined the Domestic Like Product as all welded stainless
steel pipes and pressure tubes, excluding grade 409 tubes and
mechanical tubes (also known as ornamental tubes). Thus, in addition to
welded ASTM A-312 stainless steel pipe, the Domestic Like Product
included such tubular products as ASTM A-778 and A-358 pipes and ASTM
A-249, A-269, and A-270 pressure tubes. In its full second five-year
review determinations and its expedited third five-year review
determinations, the Commission found that a change from the original
definition of the Domestic Like Product was appropriate and defined the
Domestic Like Product as only welded ASTM A-312 and A-778 stainless
steel pipes. For purposes of responding to this notice of institution
in these fourth five-year reviews, please provide the requested
information based on the Commission's most recent Domestic Like Product
determinations: Welded ASTM A-312 and A-778 stainless steel pipes.
(4) The Domestic Industry is the U.S. producers as a whole of the
Domestic Like Product, or those producers whose collective output of
the Domestic Like Product constitutes a major proportion of the total
domestic production of the product. In its original determinations and
its full first five-year review determinations, the Commission defined
the Domestic Industry as producers of welded stainless steel pipes and
pressure tubes, excluding grade 409 tubes and mechanical tubes (also
known as ornamental tubes). In its full second five-year review
determinations and its expedited third five-year review determinations,
the Commission defined the Domestic Industry as all U.S. producers of
welded ASTM A-312 and A-778 stainless steel pipes. For purposes of
responding to this notice of institution in these third five-year
reviews, please provide the requested information based on the
Commission's most recent Domestic Industry determinations: All domestic
producers of welded ASTM A-312 and A-778 stainless steel pipes.
(5) An Importer is any person or firm engaged, either directly or
through a parent company or subsidiary, in importing the Subject
Merchandise into the United States from a foreign manufacturer or
through its selling agent.
Participation in the proceeding and public service list.--Persons,
including industrial users of the Subject Merchandise and, if the
merchandise is sold at the retail level, representative consumer
organizations, wishing to participate in the proceeding as parties must
file an entry of appearance with the Secretary to the Commission, as
provided in section 201.11(b)(4) of the Commission's rules, no later
than 21 days after publication of this notice in the Federal Register.
The Secretary will maintain a public service list containing the names
and addresses of all persons, or their representatives, who are parties
to the proceeding.
Former Commission employees who are seeking to appear in Commission
five-year reviews are advised that they may appear in a review even if
they participated personally and substantially in the corresponding
underlying original investigation or an earlier review of the same
underlying investigation. The Commission's designated agency ethics
official has advised that a five-year review is not the same particular
matter as the underlying original investigation, and a five-year review
is not the same particular matter as an earlier review of the same
underlying investigation for purposes of 18 U.S.C. 207, the post
employment statute for Federal employees, and Commission rule 201.15(b)
(19 CFR 201.15(b)), 79 FR 3246 (Jan. 17, 2014), 73 FR 24609 (May 5,
2008). Consequently, former employees are not required to seek
Commission approval to appear in a review under Commission rule 19 CFR
201.15, even if the corresponding underlying original investigation or
an earlier review of the same underlying investigation was pending when
they were Commission employees. For further ethics advice on this
matter, contact Carol McCue Verratti, Deputy Agency Ethics Official, at
202-205-3088.
Limited disclosure of business proprietary information (BPI) under
an administrative protective order (APO) and APO service list.--
Pursuant to section 207.7(a) of the Commission's rules, the Secretary
will make BPI submitted in this proceeding available to authorized
applicants under the APO issued in the proceeding, provided that the
application is made no later than 21 days after publication of this
notice in the Federal Register. Authorized applicants must represent
interested parties, as defined in 19 U.S.C. 1677(9), who are parties to
the proceeding. A separate service list will be maintained by the
Secretary for those parties authorized to receive BPI under the APO.
Certification.--Pursuant to section 207.3 of the Commission's
rules, any person submitting information to the Commission in
connection with this proceeding must certify that the information is
accurate and complete to the best of the submitter's knowledge. In
making the certification, the submitter will acknowledge that
information submitted in response to this request for information and
throughout this proceeding or other proceeding may be disclosed to and
used: (i) By the Commission, its employees and Offices, and contract
personnel (a) for developing or maintaining the records of this or a
related proceeding, or (b) in internal investigations, audits, reviews,
and evaluations relating to the programs, personnel, and operations of
the Commission including under 5 U.S.C. Appendix 3; or (ii) by U.S.
government employees and contract personnel, solely for cybersecurity
purposes. All contract personnel will sign appropriate nondisclosure
agreements.
Written submissions.--Pursuant to section 207.61 of the
Commission's rules, each interested party response to this notice must
provide the information specified below. The deadline for filing such
responses is December 1, 2016. Pursuant to section 207.62(b) of the
Commission's rules, eligible parties (as specified in Commission rule
207.62(b)(1)) may also file comments concerning the adequacy of
responses to the notice of institution and whether the
[[Page 75847]]
Commission should conduct expedited or full reviews. The deadline for
filing such comments is January 13, 2017. All written submissions must
conform with the provisions of section 201.8 of the Commission's rules;
any submissions that contain BPI must also conform with the
requirements of sections 201.6, 207.3, and 207.7 of the Commission's
rules. The Commission's Handbook on E-Filing, available on the
Commission's Web site at https://edis.usitc.gov, elaborates upon the
Commission's rules with respect to electronic filing. Also, in
accordance with sections 201.16(c) and 207.3 of the Commission's rules,
each document filed by a party to the proceeding must be served on all
other parties to the proceeding (as identified by either the public or
APO service list as appropriate), and a certificate of service must
accompany the document (if you are not a party to the proceeding you do
not need to serve your response).
No response to this request for information is required if a
currently valid Office of Management and Budget (OMB) number is not
displayed; the OMB number is 3117 0016/USITC No. 16-5-373, expiration
date June 30, 2017. Public reporting burden for the request is
estimated to average 15 hours per response. Please send comments
regarding the accuracy of this burden estimate to the Office of
Investigations, U.S. International Trade Commission, 500 E Street SW.,
Washington, DC 20436.
Inability to provide requested information.--Pursuant to section
207.61(c) of the Commission's rules, any interested party that cannot
furnish the information requested by this notice in the requested form
and manner shall notify the Commission at the earliest possible time,
provide a full explanation of why it cannot provide the requested
information, and indicate alternative forms in which it can provide
equivalent information. If an interested party does not provide this
notification (or the Commission finds the explanation provided in the
notification inadequate) and fails to provide a complete response to
this notice, the Commission may take an adverse inference against the
party pursuant to section 776(b) of the Act (19 U.S.C. 1677e(b)) in
making its determinations in the reviews.
Information To Be Provided in Response to This Notice of
Institution: If you are a domestic producer, union/worker group, or
trade/business association; import/export Subject Merchandise from more
than one Subject Country; or produce Subject Merchandise in more than
one Subject Country, you may file a single response. If you do so,
please ensure that your response to each question includes the
information requested for each pertinent Subject Country. As used
below, the term ``firm'' includes any related firms.
(1) The name and address of your firm or entity (including World
Wide Web address) and name, telephone number, fax number, and Email
address of the certifying official.
(2) A statement indicating whether your firm/entity is an
interested party under 19 U.S.C. 1677(9) and if so, how, including
whether your firm/entity is a U.S. producer of the Domestic Like
Product, a U.S. union or worker group, a U.S. importer of the Subject
Merchandise, a foreign producer or exporter of the Subject Merchandise,
a U.S. or foreign trade or business association (a majority of whose
members are interested parties under the statute), or another
interested party (including an explanation). If you are a union/worker
group or trade/business association, identify the firms in which your
workers are employed or which are members of your association.
(3) A statement indicating whether your firm/entity is willing to
participate in this proceeding by providing information requested by
the Commission.
(4) A statement of the likely effects of the revocation of the
antidumping duty orders on the Domestic Industry in general and/or your
firm/entity specifically. In your response, please discuss the various
factors specified in section 752(a) of the Act (19 U.S.C. 1675a(a))
including the likely volume of subject imports, likely price effects of
subject imports, and likely impact of imports of Subject Merchandise on
the Domestic Industry.
(5) A list of all known and currently operating U.S. producers of
the Domestic Like Product. Identify any known related parties and the
nature of the relationship as defined in section 771(4)(B) of the Act
(19 U.S.C. 1677(4)(B)).
(6) A list of all known and currently operating U.S. importers of
the Subject Merchandise and producers of the Subject Merchandise in
each Subject Country that currently export or have exported Subject
Merchandise to the United States or other countries after 2010.
(7) A list of 3-5 leading purchasers in the U.S. market for the
Domestic Like Product and the Subject Merchandise (including street
address, World Wide Web address, and the name, telephone number, fax
number, and Email address of a responsible official at each firm).
(8) A list of known sources of information on national or regional
prices for the Domestic Like Product or the Subject Merchandise in the
U.S. or other markets.
(9) If you are a U.S. producer of the Domestic Like Product,
provide the following information on your firm's operations on that
product during calendar year 2015, except as noted (report quantity
data in short tons and value data in U.S. dollars, f.o.b. plant). If
you are a union/worker group or trade/business association, provide the
information, on an aggregate basis, for the firms in which your workers
are employed/which are members of your association.
(a) Production (quantity) and, if known, an estimate of the
percentage of total U.S. production of the Domestic Like Product
accounted for by your firm's(s') production;
(b) Capacity (quantity) of your firm to produce the Domestic Like
Product (i.e., the level of production that your establishment(s) could
reasonably have expected to attain during the year, assuming normal
operating conditions (using equipment and machinery in place and ready
to operate), normal operating levels (hours per week/weeks per year),
time for downtime, maintenance, repair, and cleanup, and a typical or
representative product mix);
(c) the quantity and value of U.S. commercial shipments of the
Domestic Like Product produced in your U.S. plant(s);
(d) the quantity and value of U.S. internal consumption/company
transfers of the Domestic Like Product produced in your U.S. plant(s);
and
(e) the value of (i) net sales, (ii) cost of goods sold (COGS),
(iii) gross profit, (iv) selling, general and administrative (SG&A)
expenses, and (v) operating income of the Domestic Like Product
produced in your U.S. plant(s) (include both U.S. and export commercial
sales, internal consumption, and company transfers) for your most
recently completed fiscal year (identify the date on which your fiscal
year ends).
(10) If you are a U.S. importer or a trade/business association of
U.S. importers of the Subject Merchandise from any Subject Country,
provide the following information on your firm's(s') operations on that
product during calendar year 2015 (report quantity data in short tons
and value data in U.S. dollars). If you are a trade/business
association, provide the information, on an aggregate basis, for the
firms which are members of your association.
(a) The quantity and value (landed, duty-paid but not including
antidumping duties) of U.S. imports and, if known, an estimate of the
percentage of total U.S. imports of
[[Page 75848]]
Subject Merchandise from each Subject Country accounted for by your
firm's(s') imports;
(b) the quantity and value (f.o.b. U.S. port, including antidumping
duties) of U.S. commercial shipments of Subject Merchandise imported
from each Subject Country; and
(c) the quantity and value (f.o.b. U.S. port, including antidumping
duties) of U.S. internal consumption/company transfers of Subject
Merchandise imported from each Subject Country.
(11) If you are a producer, an exporter, or a trade/business
association of producers or exporters of the Subject Merchandise in any
Subject Country, provide the following information on your firm's(s')
operations on that product during calendar year 2015 (report quantity
data in short tons and value data in U.S. dollars, landed and duty-paid
at the U.S. port but not including antidumping duties). If you are a
trade/business association, provide the information, on an aggregate
basis, for the firms which are members of your association.
(a) Production (quantity) and, if known, an estimate of the
percentage of total production of Subject Merchandise in each Subject
Country accounted for by your firm's(s') production;
(b) Capacity (quantity) of your firm(s) to produce the Subject
Merchandise in each Subject Country (i.e., the level of production that
your establishment(s) could reasonably have expected to attain during
the year, assuming normal operating conditions (using equipment and
machinery in place and ready to operate), normal operating levels
(hours per week/weeks per year), time for downtime, maintenance,
repair, and cleanup, and a typical or representative product mix); and
(c) the quantity and value of your firm's(s') exports to the United
States of Subject Merchandise and, if known, an estimate of the
percentage of total exports to the United States of Subject Merchandise
from each Subject Country accounted for by your firm's(s') exports.
(12) Identify significant changes, if any, in the supply and demand
conditions or business cycle for the Domestic Like Product that have
occurred in the United States or in the market for the Subject
Merchandise in each Subject Country after 2010, and significant
changes, if any, that are likely to occur within a reasonably
foreseeable time. Supply conditions to consider include technology;
production methods; development efforts; ability to increase production
(including the shift of production facilities used for other products
and the use, cost, or availability of major inputs into production);
and factors related to the ability to shift supply among different
national markets (including barriers to importation in foreign markets
or changes in market demand abroad). Demand conditions to consider
include end uses and applications; the existence and availability of
substitute products; and the level of competition among the Domestic
Like Product produced in the United States, Subject Merchandise
produced in each Subject Country, and such merchandise from other
countries.
(13) (Optional) A statement of whether you agree with the above
definitions of the Domestic Like Product and Domestic Industry; if you
disagree with either or both of these definitions, please explain why
and provide alternative definitions.
Authority: This proceeding is being conducted under authority of
title VII of the Tariff Act of 1930; this notice is published
pursuant to section 207.61 of the Commission's rules.
By order of the Commission.
Issued: October 26, 2016.
Lisa R. Barton,
Secretary to the Commission.
[FR Doc. 2016-26267 Filed 10-31-16; 8:45 am]
BILLING CODE 7020-02-P