Tapered Roller Bearings and Parts Thereof, Finished and Unfinished, From the People's Republic of China: Final Rescission of Antidumping Duty New Shipper Review; 2014-2015, 8044-8045 [2016-03261]

Download as PDF 8044 Federal Register / Vol. 81, No. 31 / Wednesday, February 17, 2016 / Notices Cash Deposit Requirements As a result of the aforementioned recalculation of the Rummo Group’s rate, the weighted-average dumping margin for the two non-selected companies has changed. asabaliauskas on DSK5VPTVN1PROD with NOTICES The following cash deposit requirements will be effective upon publication of the notice of final results of administrative review for all shipments of subject merchandise Final Results of the Review entered, or withdrawn from warehouse, As a result of this review, the for consumption on or after the Department determines the following publication of the final results of this weighted-average dumping margins 9 for administrative review, as provided by the period July 1, 2013, through June 30, section 751(a)(2) of the Act: (1) The cash 2014: deposit rate for respondents noted above will be the rate established in the final Weighted- results of this administrative review; (2) average for merchandise exported by Producer and/or exporter dumping manufacturers or exporters not covered margin in this administrative review but (percent) covered in a prior segment of the La Molisana S.p.A. ..................... 12.90 proceeding, the cash deposit rate will Rummo S.p.A., Lenta continue to be the company specific rate Lavorazione, Pasta Castiglioni, published for the most recently and Rummo S.p.A. Molino e completed segment of this proceeding; Pastificio (collectively, the Rummo Group) ....................... 0.00 (3) if the exporter is not a firm covered Pastificio Andalini S.p.A. ............ 12.90 in this review, a prior review, or the original investigation, but the Delverde Industrie Alimentari S.p.A. ...................................... 12.90 manufacturer is, the cash deposit rate will be the rate established for the most recently completed segment of this Duty Assessment proceeding for the manufacturer of the The Department shall determine and subject merchandise; and (4) the cash Customs and Border Protection (CBP) deposit rate for all other manufacturers shall assess antidumping duties on all or exporters will continue to be 15.45 appropriate entries.10 For any percent, the all-others rate established individually examined respondents in the antidumping investigation as whose weighted-average dumping modified by the section 129 margin is above de minimis, we determination. These cash deposit calculated importer-specific ad valorem requirements, when imposed, shall duty assessment rates based on the ratio remain in effect until further notice. of the total amount of dumping Notification to Importers Regarding the calculated for the importer’s examined Reimbursement of Duties sales to the total entered value of those This notice also serves as a final same sales in accordance with 19 CFR 351.212(b)(1). Upon issuance of the final reminder to importers of their responsibility under 19 CFR 351.402(f) results of this administrative review, if to file a certificate regarding the any importer-specific assessment rates reimbursement of antidumping and/or calculated in the final results are above de minimis (i.e., at or above 0.5 percent), countervailing duties prior to liquidation of the relevant entries the Department will issue instructions during the POR. Failure to comply with directly to CBP to assess antidumping this requirement could result in the duties on appropriate entries. Department’s presumption that We intend to issue assessment reimbursement of antidumping and/or instructions directly to CBP 15 days countervailing duties occurred and the after publication of the final results of subsequent assessment of doubled this review. antidumping duties. ‘‘Certain Pasta from Italy: Calculation Memorandum—the Rummo Group,’’ dated February 9, 2016. 9 The margin for the non-examined companies was based on the calculated weighted-average margin of La Molisana (the sole mandatory respondent receiving an above de minimis margin in these final results). 10 In these final results, the Department applied the assessment rate calculation method adopted in Antidumping Proceedings: Calculation of the Weighted-Average Dumping Margin and Assessment Rate in Certain Antidumping Proceedings: Final Modification, 77 FR 8101 (February 14, 2012). VerDate Sep<11>2014 19:05 Feb 16, 2016 Jkt 238001 Administrative Protective Order This notice also serves as a reminder to parties subject to administrative protective orders (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return/destruction of PO 00000 Frm 00011 Fmt 4703 Sfmt 4703 APO materials, or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation. We are issuing and publishing this notice in accordance with sections 751(a)(1) and 777(i)(1) of the Act and 19 CFR 351.213(h). Dated: February 9, 2016. Paul Piquado, Assistant Secretary for Enforcement and Compliance. Appendix List of Topics Discussed in the Final Issues and Decision Memorandum Summary I. Background Scope of the Order II. List of Comments III. Analysis of Comments La Molisana Comment 1: Pasta Shape Comment 2: General and Administrative (G&A) Ratio Comment 3: Indirect Selling Expenses Comment 4: Direct Materials Calculation Comment 5: Direct Selling Expenses Comment 6: Applying Differential Pricing Analysis The Rummo Group Comment 7: Treatment of Pasta Castiglioni’s Home Market Control Numbers Comment 8: Treatment of Matching U.S. Sales with Home Market Sales Comment 9: Treatment of the Manufacturers, Rummo and Pasta Castiglioni Comment 10: Treatment of the Rummo Group’s Freight Revenue Comment 11: Application of a Cap for Certain U.S. Market Freight Revenue (FRTREVU) Comment 12: Application of a Countervailing Duty Offset (CVDU) to Rummo Comment 13: Treatment of Negative Margins Associated with the Differential Pricing (DP) Methodology IV. Recommendation [FR Doc. 2016–03252 Filed 2–16–16; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [A–570–601] Tapered Roller Bearings and Parts Thereof, Finished and Unfinished, From the People’s Republic of China: Final Rescission of Antidumping Duty New Shipper Review; 2014–2015 Enforcement and Compliance, International Trade Administration, Department of Commerce DATES: Effective February 17, 2016. FOR FURTHER INFORMATION CONTACT: Elizabeth Eastwood, AD/CVD AGENCY: E:\FR\FM\17FEN1.SGM 17FEN1 Federal Register / Vol. 81, No. 31 / Wednesday, February 17, 2016 / Notices Operations, Office II, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482–3874. SUPPLEMENTARY INFORMATION: Background On December 22, 2015, the Department of Commerce (the Department) published the preliminary rescission of the new shipper review of the antidumping duty (AD) order on tapered roller bearings and parts thereof, finished and unfinished (TRBs), from the People’s Republic of China (PRC) for Zhejiang Changxing CTL Auto Parts Manufacturing Co., Ltd. (Changxing).1 We invited parties to comments on our Preliminary Rescission Notice; however, no interested party submitted comments. Therefore, we made no changes to our analysis for purposes of this final rescission, and we are rescinding the new shipper review of the AD order on TRBs from the PRC with respect to Changxing. asabaliauskas on DSK5VPTVN1PROD with NOTICES Scope of the Order Imports covered by the order are shipments of tapered roller bearings and parts thereof, finished and unfinished, from the PRC; flange, take up cartridge, and hanger units incorporating tapered roller bearings; and tapered roller housings (except pillow blocks) incorporating tapered rollers, with or without spindles, whether or not for automotive use. These products are currently classifiable under Harmonized Tariff Schedule of the United States (HTSUS) item numbers 8482.20.00, 8482.91.00.50, 8482.99.15, 8482.99.45, 8483.20.40, 8483.20.80, 8483.30.80, 8483.90.20, 8483.90.30, 8483.90.80, 8708.70.6060, 8708.99.2300, 8708.99.4850, 8708.99.6890, 8708.99.8115, and 8708.99.8180. Although the HTSUS item numbers are provided for convenience and customs purposes, the written description of the scope of the order is dispositive. Rescission of Review As discussed in the Preliminary Rescission Notice, Changxing failed to respond to the Department’s request for additional information regarding possible entries of subject merchandise that predated the applicable period of review (POR).2 In the absence of any 1 See Tapered Roller Bearings and Parts Thereof, Finished and Unfinished, From the People’s Republic of China: Preliminary Rescission of Antidumping Duty New Shipper Review; 2014– 2015, 80 FR 79561 (December 22, 2015) (Preliminary Rescission Notice). 2 Id., at 79561. VerDate Sep<11>2014 19:05 Feb 16, 2016 Jkt 238001 comments on this issue, we continue to find on the basis of adverse facts available, pursuant to section 776(a) and (b) of the Tariff Act of 1930, as amended (the Act), that Changxing had additional entries of subject merchandise prior to the POR (June 1, 2014, through May 31, 2015) that were not reported to the Department at the time of Changxing’s request for a new shipper review. Based on the foregoing, we find that Changxing does not meet the minimum requirements for a new shipper review under 19 CFR 351.214(b)(2)(iv)(C) in that Changxing’s request did not contain documentation establishing the date of its first sale to an unaffiliated customer in the United States. Because we find that Changxing’s request for a new shipper review did not satisfy the regulatory requirements for initiation of a new shipper review, we are rescinding the new shipper review of the AD order on TRBs from the PRC with respect to Changxing. Assessment Rates Because we are rescinding the new shipper review of Changxing, we are not making a determination as to whether Changxing qualifies for a separate rate. Therefore, Changxing remains part of the PRC entity and any entries covered by this new shipper review will be assessed at the PRC-wide rate. Cash Deposit Requirements Effective upon publication of the final rescission of the new shipper review of Changxing, the Department will instruct U.S. Customs and Border Protection to discontinue the option of posting a bond or security in lieu of a cash deposit for entries of subject merchandise from Changxing.3 Because we did not calculate a dumping margin for Changxing or grant Changxing a separate rate in this new shipper review, we find that Changxing continues to be part of the PRC-wide entity. The cash deposit rate for the PRC-wide entity is 92.84 percent. These cash deposit requirements shall remain in effect until further notice. Notification to Importers This notice also serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Department’s presumption that 3 See section 751(a)(2)(B)(iii) of the Act ; see also 19 CFR 351.214(e). PO 00000 Frm 00012 Fmt 4703 Sfmt 4703 8045 reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties. Administrative Protective Order In accordance with 19 CFR 351.305(a)(3), this notice also serves as a final reminder to parties subject to administrative protective order (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under the APO, which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation subject to sanction. Notification to Interested Parties This new shipper review and notice are in accordance with sections 751(a)(2)(B) and 777(i) of the Act and 19 CFR 351.214(f)(3). Dated: February 8, 2016. Paul Piquado, Assistant Secretary for Enforcement and Compliance. [FR Doc. 2016–03261 Filed 2–16–16; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE National Institute of Standards and Technology Proposed Information Collection; Comment Request; National Institute of Standards and Technology (NIST), Generic Clearance for Community Resilience Data Collections National Institute of Standards and Technology, Commerce. ACTION: Notice. AGENCY: The Department of Commerce, as part of its continuing effort to reduce paperwork and respondent burden, invites the general public and other Federal agencies to take this opportunity to comment on proposed and/or continuing information collections, as required by the Paperwork Reduction Act of 1995. DATES: Written comments must be submitted on or before April 18, 2016. ADDRESSES: Direct all written comments to Jennifer Jessup, Departmental Paperwork Clearance Officer, Department of Commerce, Room 6616, 14th and Constitution Avenue NW., Washington, DC 20230 (or via the Internet at JJessup@doc.gov). SUMMARY: E:\FR\FM\17FEN1.SGM 17FEN1

Agencies

[Federal Register Volume 81, Number 31 (Wednesday, February 17, 2016)]
[Notices]
[Pages 8044-8045]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-03261]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[A-570-601]


Tapered Roller Bearings and Parts Thereof, Finished and 
Unfinished, From the People's Republic of China: Final Rescission of 
Antidumping Duty New Shipper Review; 2014-2015

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce

DATES: Effective February 17, 2016.

FOR FURTHER INFORMATION CONTACT: Elizabeth Eastwood, AD/CVD

[[Page 8045]]

Operations, Office II, Enforcement and Compliance, International Trade 
Administration, U.S. Department of Commerce, 14th Street and 
Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-
3874.

SUPPLEMENTARY INFORMATION:

Background

    On December 22, 2015, the Department of Commerce (the Department) 
published the preliminary rescission of the new shipper review of the 
antidumping duty (AD) order on tapered roller bearings and parts 
thereof, finished and unfinished (TRBs), from the People's Republic of 
China (PRC) for Zhejiang Changxing CTL Auto Parts Manufacturing Co., 
Ltd. (Changxing).\1\ We invited parties to comments on our Preliminary 
Rescission Notice; however, no interested party submitted comments. 
Therefore, we made no changes to our analysis for purposes of this 
final rescission, and we are rescinding the new shipper review of the 
AD order on TRBs from the PRC with respect to Changxing.
---------------------------------------------------------------------------

    \1\ See Tapered Roller Bearings and Parts Thereof, Finished and 
Unfinished, From the People's Republic of China: Preliminary 
Rescission of Antidumping Duty New Shipper Review; 2014-2015, 80 FR 
79561 (December 22, 2015) (Preliminary Rescission Notice).
---------------------------------------------------------------------------

Scope of the Order

    Imports covered by the order are shipments of tapered roller 
bearings and parts thereof, finished and unfinished, from the PRC; 
flange, take up cartridge, and hanger units incorporating tapered 
roller bearings; and tapered roller housings (except pillow blocks) 
incorporating tapered rollers, with or without spindles, whether or not 
for automotive use. These products are currently classifiable under 
Harmonized Tariff Schedule of the United States (HTSUS) item numbers 
8482.20.00, 8482.91.00.50, 8482.99.15, 8482.99.45, 8483.20.40, 
8483.20.80, 8483.30.80, 8483.90.20, 8483.90.30, 8483.90.80, 
8708.70.6060, 8708.99.2300, 8708.99.4850, 8708.99.6890, 8708.99.8115, 
and 8708.99.8180. Although the HTSUS item numbers are provided for 
convenience and customs purposes, the written description of the scope 
of the order is dispositive.

Rescission of Review

    As discussed in the Preliminary Rescission Notice, Changxing failed 
to respond to the Department's request for additional information 
regarding possible entries of subject merchandise that predated the 
applicable period of review (POR).\2\ In the absence of any comments on 
this issue, we continue to find on the basis of adverse facts 
available, pursuant to section 776(a) and (b) of the Tariff Act of 
1930, as amended (the Act), that Changxing had additional entries of 
subject merchandise prior to the POR (June 1, 2014, through May 31, 
2015) that were not reported to the Department at the time of 
Changxing's request for a new shipper review. Based on the foregoing, 
we find that Changxing does not meet the minimum requirements for a new 
shipper review under 19 CFR 351.214(b)(2)(iv)(C) in that Changxing's 
request did not contain documentation establishing the date of its 
first sale to an unaffiliated customer in the United States. Because we 
find that Changxing's request for a new shipper review did not satisfy 
the regulatory requirements for initiation of a new shipper review, we 
are rescinding the new shipper review of the AD order on TRBs from the 
PRC with respect to Changxing.
---------------------------------------------------------------------------

    \2\ Id., at 79561.
---------------------------------------------------------------------------

Assessment Rates

    Because we are rescinding the new shipper review of Changxing, we 
are not making a determination as to whether Changxing qualifies for a 
separate rate. Therefore, Changxing remains part of the PRC entity and 
any entries covered by this new shipper review will be assessed at the 
PRC-wide rate.

Cash Deposit Requirements

    Effective upon publication of the final rescission of the new 
shipper review of Changxing, the Department will instruct U.S. Customs 
and Border Protection to discontinue the option of posting a bond or 
security in lieu of a cash deposit for entries of subject merchandise 
from Changxing.\3\ Because we did not calculate a dumping margin for 
Changxing or grant Changxing a separate rate in this new shipper 
review, we find that Changxing continues to be part of the PRC-wide 
entity. The cash deposit rate for the PRC-wide entity is 92.84 percent. 
These cash deposit requirements shall remain in effect until further 
notice.
---------------------------------------------------------------------------

    \3\ See section 751(a)(2)(B)(iii) of the Act ; see also 19 CFR 
351.214(e).
---------------------------------------------------------------------------

Notification to Importers

    This notice also serves as a final reminder to importers of their 
responsibility under 19 CFR 351.402(f)(2) to file a certificate 
regarding the reimbursement of antidumping duties prior to liquidation 
of the relevant entries during this review period. Failure to comply 
with this requirement could result in the Department's presumption that 
reimbursement of antidumping duties occurred and the subsequent 
assessment of double antidumping duties.

Administrative Protective Order

    In accordance with 19 CFR 351.305(a)(3), this notice also serves as 
a final reminder to parties subject to administrative protective order 
(APO) of their responsibility concerning the return or destruction of 
proprietary information disclosed under the APO, which continues to 
govern business proprietary information in this segment of the 
proceeding. Timely written notification of the return or destruction of 
APO materials or conversion to judicial protective order is hereby 
requested. Failure to comply with the regulations and terms of an APO 
is a violation subject to sanction.

Notification to Interested Parties

    This new shipper review and notice are in accordance with sections 
751(a)(2)(B) and 777(i) of the Act and 19 CFR 351.214(f)(3).

    Dated: February 8, 2016.
Paul Piquado,
Assistant Secretary for Enforcement and Compliance.
[FR Doc. 2016-03261 Filed 2-16-16; 8:45 am]
 BILLING CODE 3510-DS-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.