Circular Welded Carbon-Quality Steel Pipe From Pakistan: Postponement of Preliminary Determination in Countervailing Duty Investigation, 63 [2015-33057]
Download as PDF
Federal Register / Vol. 81, No. 1 / Monday, January 4, 2016 / Notices
and 1508.22; Forest Service Handbook
1909.15, Section 21). However,
comments submitted anonomously will
be accepted and considered.
Dated: December 15, 2015.
Patricia A. Grantham,
Forest Supervisor.
[FR Doc. 2015–32522 Filed 12–31–15; 8:45 am]
BILLING CODE 3411–15–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–84–2015]
tkelley on DSK3SPTVN1PROD with NOTICES
Foreign-Trade Zone 78—Nashville,
Tennessee; Application for Expansion
of Subzone 78A, Nissan North
America, Inc., Smyrna, Tennessee
An application has been submitted to
the Foreign-Trade Zones (FTZ) Board by
the Metropolitan Government of
Nashville and Davidson County, grantee
of FTZ 78, requesting to expand
Subzone 78A—Site 1 at the facility of
Nissan North America, Inc., located in
Smyrna, Tennessee. The application
was submitted pursuant to the
provisions of the Foreign-Trade Zones
Act, as amended (19 U.S.C. 81a–81u),
and the regulations of the FTZ Board (15
CFR part 400). It was formally docketed
on December 23, 2015.
Subzone 78A was approved on April
2, 1982 (Board Order 190, 47 FR 16191,
April 15, 1982) and expanded on March
18, 1993 (Board Order 632, 58 FR 18850,
March 30, 1993). The subzone currently
consists of two sites: Site 1 (1,004 acres)
located at 983 Nissan Drive, Smyrna;
and, Site 2 (958 acres) located at 520
Nissan Powertrain Drive, Decherd. (An
application is currently pending with
the FTZ Board to expand Site 1 of the
subzone to include 22 additional acres
adjacent to the site (B–77–2015)).
The applicant is requesting authority
to further expand Site 1 of the subzone
to include 77.03 additional acres
adjacent to the present site. No
authorization for additional production
activity has been requested at this time.
In accordance with the FTZ Board’s
regulations, Kathleen Boyce of the FTZ
Staff is designated examiner to review
the application and make
recommendations to the Executive
Secretary.
Public comment is invited from
interested parties. Submissions shall be
addressed to the FTZ Board’s Executive
Secretary at the address below. The
closing period for their receipt is
February 16, 2016. Rebuttal comments
in response to material submitted
during the foregoing period may be
VerDate Sep<11>2014
16:43 Dec 31, 2015
Jkt 238001
submitted during the subsequent 15-day
period to February 29, 2016.
A copy of the application will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
Board’s Web site, which is accessible
via www.trade.gov/ftz.
For further information, contact
Kathleen Boyce at
Kathleen.Boyce@trade.gov or (202) 482–
1346.
Dated: December 23, 2015.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2015–32780 Filed 12–31–15; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[C–535–904]
Circular Welded Carbon-Quality Steel
Pipe From Pakistan: Postponement of
Preliminary Determination in
Countervailing Duty Investigation
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
DATES: Effective Date: January 4, 2016.
FOR FURTHER INFORMATION CONTACT:
Kaitlin Wojnar, AD/CVD Operations,
Office VII, Enforcement and
Compliance, International Trade
Administration, U.S. Department of
Commerce, 14th Street and Constitution
Avenue NW., Washington, DC 20230;
telephone: (202) 482–3857.
SUPPLEMENTARY INFORMATION:
AGENCY:
63
Department initiated the investigation.
However, in accordance with 19 CFR
351.205(e), if a petitioner makes a
timely request for an extension, section
703(c)(1)(A) of the Act allows the
Department to postpone the preliminary
determination until no later than 130
days after the date on which the
Department initiated the investigation.
Under 19 CFR 351.205(e), a petitioner
must submit a request for postponement
25 days or more before the scheduled
date of the preliminary determination
and must state the reason for the
request. The Department will grant the
request unless it finds compelling
reasons to deny the request.2
On December 18, 2015, the petitioners
in this investigation, Bull Moose Tube
Company, EXLTUBE, Wheatland Tube,
and Western Tube & Conduit
(collectively, Petitioners) submitted a
timely request, pursuant to section
703(c)(l)(A) of the Act and 19 CFR
351.205(e), to postpone the preliminary
determination.3
The record does not present any
compelling reasons to deny Petitioners’
request. Therefore, in accordance with
section 703(c)(l)(A) of the Act, the
Department is hereby postponing the
due date for the preliminary
determination in this investigation to no
later than 130 days after the day on
which the investigation was initiated.
As a result, the deadline for completion
of the preliminary determination is now
March 28, 2015.
This notice is issued and published
pursuant to section 703(c)(2) of the Act
and 19 CFR 351.205(f)(l).
Dated: December 24, 2015.
Paul Piquado,
Assistant Secretary for Enforcement and
Compliance.
[FR Doc. 2015–33057 Filed 12–31–15; 8:45 am]
BILLING CODE 3510–DS–P
Background
On November 17, 2015, the
Department of Commerce (the
Department) initiated a countervailing
duty (CVD) investigation of circular
welded carbon-quality steel pipe from
Pakistan.1 Currently, the preliminary
determination is due no later than
January 21, 2016.
Postponement of the Preliminary
Determination
Section 703(b)(1) of the Tariff Act of
1930, as amended (the Act), requires the
Department to issue the preliminary
determination in a CVD investigation
within 65 days of the date on which the
DEPARTMENT OF COMMERCE
International Trade Administration
[A–533–863]
Certain Corrosion-Resistant Steel
Products From India: Affirmative
Preliminary Determination of Sales at
Less Than Fair Value and
Postponement of Final Determination
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
AGENCY:
2 See
19 CFR 351.205(e).
Letter from Petitioners, ‘‘Circular Welded
Carbon-Quality Steel Pipe from Pakistan: Request to
Extend the Preliminary Determination,’’ December
18, 2015.
3 See
1 See Circular Welded Carbon-Quality Steel Pipe
from Pakistan: Initiation of Countervailing Duty
Investigation, 80 FR 73704 (November 25, 2015).
PO 00000
Frm 00003
Fmt 4703
Sfmt 4703
E:\FR\FM\04JAN1.SGM
04JAN1
Agencies
[Federal Register Volume 81, Number 1 (Monday, January 4, 2016)]
[Notices]
[Page 63]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-33057]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
[C-535-904]
Circular Welded Carbon-Quality Steel Pipe From Pakistan:
Postponement of Preliminary Determination in Countervailing Duty
Investigation
AGENCY: Enforcement and Compliance, International Trade Administration,
Department of Commerce.
DATES: Effective Date: January 4, 2016.
FOR FURTHER INFORMATION CONTACT: Kaitlin Wojnar, AD/CVD Operations,
Office VII, Enforcement and Compliance, International Trade
Administration, U.S. Department of Commerce, 14th Street and
Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-
3857.
SUPPLEMENTARY INFORMATION:
Background
On November 17, 2015, the Department of Commerce (the Department)
initiated a countervailing duty (CVD) investigation of circular welded
carbon-quality steel pipe from Pakistan.\1\ Currently, the preliminary
determination is due no later than January 21, 2016.
---------------------------------------------------------------------------
\1\ See Circular Welded Carbon-Quality Steel Pipe from Pakistan:
Initiation of Countervailing Duty Investigation, 80 FR 73704
(November 25, 2015).
---------------------------------------------------------------------------
Postponement of the Preliminary Determination
Section 703(b)(1) of the Tariff Act of 1930, as amended (the Act),
requires the Department to issue the preliminary determination in a CVD
investigation within 65 days of the date on which the Department
initiated the investigation. However, in accordance with 19 CFR
351.205(e), if a petitioner makes a timely request for an extension,
section 703(c)(1)(A) of the Act allows the Department to postpone the
preliminary determination until no later than 130 days after the date
on which the Department initiated the investigation. Under 19 CFR
351.205(e), a petitioner must submit a request for postponement 25 days
or more before the scheduled date of the preliminary determination and
must state the reason for the request. The Department will grant the
request unless it finds compelling reasons to deny the request.\2\
---------------------------------------------------------------------------
\2\ See 19 CFR 351.205(e).
---------------------------------------------------------------------------
On December 18, 2015, the petitioners in this investigation, Bull
Moose Tube Company, EXLTUBE, Wheatland Tube, and Western Tube & Conduit
(collectively, Petitioners) submitted a timely request, pursuant to
section 703(c)(l)(A) of the Act and 19 CFR 351.205(e), to postpone the
preliminary determination.\3\
---------------------------------------------------------------------------
\3\ See Letter from Petitioners, ``Circular Welded Carbon-
Quality Steel Pipe from Pakistan: Request to Extend the Preliminary
Determination,'' December 18, 2015.
---------------------------------------------------------------------------
The record does not present any compelling reasons to deny
Petitioners' request. Therefore, in accordance with section
703(c)(l)(A) of the Act, the Department is hereby postponing the due
date for the preliminary determination in this investigation to no
later than 130 days after the day on which the investigation was
initiated. As a result, the deadline for completion of the preliminary
determination is now March 28, 2015.
This notice is issued and published pursuant to section 703(c)(2)
of the Act and 19 CFR 351.205(f)(l).
Dated: December 24, 2015.
Paul Piquado,
Assistant Secretary for Enforcement and Compliance.
[FR Doc. 2015-33057 Filed 12-31-15; 8:45 am]
BILLING CODE 3510-DS-P