October 26, 2015 – Federal Register Recent Federal Regulation Documents

Results 101 - 110 of 110
International Product and Price Changes
Document Number: 2015-26918
Type: Rule
Date: 2015-10-26
Agency: Postal Service, Agencies and Commissions
The Postal Service is revising Mailing Standards of the United States Postal Service, International Mail Manual (IMM[supreg]), to reflect the prices, product features, and classification changes to Competitive Services, as established by the Governors of the Postal Service.
Notice of Meeting
Document Number: 2015-26859
Type: Notice
Date: 2015-10-26
Agency: Commission of Fine Arts, Agencies and Commissions
General Provisions and Non-Federal Oil and Gas Rights
Document Number: 2015-26812
Type: Proposed Rule
Date: 2015-10-26
Agency: Department of the Interior, National Park Service
We are proposing to update our service-wide regulations governing the exercise of non-federal oil and gas rights, to improve our ability to protect park resources, values, and visitors from potential impacts associated with non-federal oil and gas operations located within National Park Service units. The proposed rule would also make the regulations consistent with existing policies and practices, and update the format to improve clarity and simplify application and compliance for oil and gas operators and our employees.
Debt Management Advisory Committee Meeting
Document Number: 2015-26801
Type: Notice
Date: 2015-10-26
Agency: Department of the Treasury
Notice of Availability: CPSC Plan for Retrospective Review of Existing Rules
Document Number: 2015-26695
Type: Proposed Rule
Date: 2015-10-26
Agency: Consumer Product Safety Commission, Agencies and Commissions
The Consumer Product Safety Commission (``Commission,'' or ``CPSC'') has approved a document titled, ``Plan for Retrospective Review of Existing Rules.'' CPSC seeks comments on this plan.
Petition Requesting Rulemaking on Products Containing Organohalogen Flame Retardants; Notice of Extension of Comment Period; Notice of Opportunity for Oral Presentation of Comments
Document Number: 2015-26694
Type: Proposed Rule
Date: 2015-10-26
Agency: Consumer Product Safety Commission, Agencies and Commissions
The United States Consumer Product Safety Commission (``Commission'' or ``CPSC'') on August 19, 2015 published a notice that the Commission received a petition for rulemaking under the Federal Hazardous Substances Act (``FHSA'') regarding additive organohalogen flame retardants. The notice invited the public to submit written comments concerning the petition by October 19, 2015. The Commission has received two requests to extend the comment period. In response to these requests, the Commission is extending the comment period to January 19, 2016. Additionally, the Commission announces that there will be an opportunity for interested persons to present oral comments on the petition.
Senior Executive Service: Performance Review Board Members
Document Number: 2015-26665
Type: Notice
Date: 2015-10-26
Agency: Small Business Administration, Agencies and Commissions
Title 5 U.S.C. 4314(c)(4) requires each agency to publish notification of the appointment of individuals who may serve as members of that Agency's Performance Review Board (PRB). The following individuals have been designated to serve on the FY 2016 Performance Review Board for the U.S. Small Business Administration.
Airworthiness Directives; Fokker Services B.V. Airplanes
Document Number: 2015-26612
Type: Rule
Date: 2015-10-26
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all Fokker Services B.V. Model F.27 Mark 200, 300, 400, 500, 600, and 700 airplanes. This AD was prompted by a design review, which revealed that no controlled bonding provisions are present on a number of critical locations inside the fuel tank or connected to the fuel tank wall; and no anti-spray cover is installed on the fuel shut-off valve (FSOV) in both wings. This AD requires installing additional bonding provisions in the fuel tank, installing an anti-spray cover on the FSOV, and revising the airplane maintenance program by incorporating fuel airworthiness limitation items and critical design configuration control limitations. We are issuing this AD to prevent an ignition source in the fuel tank vapor space, which could result in a fuel tank explosion and consequent loss of the airplane.
National Ambient Air Quality Standards for Ozone
Document Number: 2015-26594
Type: Rule
Date: 2015-10-26
Agency: Environmental Protection Agency
Based on its review of the air quality criteria for ozone (O3) and related photochemical oxidants and national ambient air quality standards (NAAQS) for O3, the Environmental Protection Agency (EPA) is revising the primary and secondary NAAQS for O3 to provide requisite protection of public health and welfare, respectively. The EPA is revising the levels of both standards to 0.070 parts per million (ppm), and retaining their indicators (O3), forms (fourth-highest daily maximum, averaged across three consecutive years) and averaging times (eight hours). The EPA is making corresponding revisions in data handling conventions for O3 and changes to the Air Quality Index (AQI); revising regulations for the prevention of significant deterioration (PSD) program to add a transition provision for certain applications; and establishing exceptional events schedules and providing information related to implementing the revised standards. The EPA is also revising the O3 monitoring seasons, the Federal Reference Method (FRM) for monitoring O3 in the ambient air, Federal Equivalent Method (FEM) analyzer performance requirements, and the Photochemical Assessment Monitoring Stations (PAMS) network. Along with exceptional events schedules related to implementing the revised O3 standards, the EPA is applying this same schedule approach to other future new or revised NAAQS and removing obsolete regulatory language for expired exceptional events deadlines. The EPA is making minor changes to the procedures and time periods for evaluating potential FRMs and equivalent methods, including making the requirements for nitrogen dioxide (NO2) consistent with the requirements for O3, and removing an obsolete requirement for the annual submission of Product Manufacturing Checklists by manufacturers of FRMs and FEMs for monitors of fine and coarse particulate matter. For a more detailed summary, see the Executive Summary below.
NESHAP for Brick and Structural Clay Products Manufacturing; and NESHAP for Clay Ceramics Manufacturing
Document Number: 2015-25724
Type: Rule
Date: 2015-10-26
Agency: Environmental Protection Agency
The Environmental Protection Agency (EPA) is finalizing national emission standards for hazardous air pollutants (NESHAP) for Brick and Structural Clay Products (BSCP) Manufacturing and NESHAP for Clay Ceramics Manufacturing. All major sources in these categories must meet maximum achievable control technology (MACT) standards for mercury (Hg), non-mercury (non-Hg) metal hazardous air pollutants (HAP) (or particulate matter (PM) surrogate) and dioxins/furans (Clay Ceramics only); health-based standards for acid gas HAP; and work practice standards, where applicable. The final rule, which has been informed by input from industry (including small businesses), environmental groups, and other stakeholders, protects air quality and promotes public health by reducing emissions of HAP listed in section 112 of the Clean Air Act (CAA).
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.