United States Manufacturing Council: Meeting of the United States Manufacturing Council, 38437-38438 [2015-16374]

Download as PDF Federal Register / Vol. 80, No. 128 / Monday, July 6, 2015 / Notices 35. T.M. Duche Nut Company, Inc. (Orland, CA) 36. Wilbur Packing Company, Inc. (Live Oak, CA) 37. Valley Fig Growers (Fresno, CA) Dated: June 29, 2015. Joseph Flynn, Director, Office of Trade and Economic Analysis, International Trade Administration. [FR Doc. 2015–16474 Filed 7–2–15; 8:45 am] 7409.21.00.75, 7409.21.00.90, 7409.29.00.50, 7409.29.00.75, and 7409.29.00.90 of the Harmonized Tariff Schedule of the United States (HTSUS). The HTSUS numbers are provided for convenience and customs purposes. A full description of the scope of the order is contained in the Preliminary Decision Memorandum.2 The written description is dispositive. Final Results of Review BILLING CODE 3510–DR–P As a result of our review, we determine that the following dumping margin on BSS from Italy exists for the period March 1, 2013, through February 28, 2014: DEPARTMENT OF COMMERCE International Trade Administration [A–475–601] Brass Sheet and Strip From Italy; Final Results of Antidumping Duty Administrative Review; 2013–2014 Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY: On April 8, 2015, the Department of Commerce (the Department) published in the Federal Register the preliminary results of the administrative review of the antidumping duty order on brass sheet and strip (BSS) from Italy, covering the period of review (POR) March 1, 2013, through February 28, 2014.1 This review covers one company, KME Italy SpA (KME Italy). The Department conducted this administrative review in accordance with section 751(a) of the Tariff Act of 1930, as amended (the Act). The Department gave interested parties an opportunity to comment on the Preliminary Results, but we received no comments. Hence, these final results are unchanged from the Preliminary Results. DATES: Effective Date: July 6, 2015. FOR FURTHER INFORMATION CONTACT: Joseph Shuler, AD/CVD Operations, Office I, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482–1293. SUPPLEMENTARY INFORMATION: Exporter/manufacturer Dumping margin (percent) KME Italy SpA ............................ 22.00 AGENCY: Lhorne on DSK7TPTVN1PROD with NOTICES Scope of the Order The merchandise subject to the antidumping duty order is brass sheet and strip, other than leaded brass and tin brass sheet and strip, from Italy, which is currently classified under subheading 7409.21.00.50, 1 See Brass Sheet and Strip From Italy; Preliminary Results of Antidumping Duty Administrative Review; 2013–2014, 80 FR 18808 (April 8, 2015) (Preliminary Results). VerDate Sep<11>2014 14:37 Jul 02, 2015 Jkt 235001 Assessment Rates Pursuant to section 751(a)(2)(C) of the Act and 19 CFR 351.212(b)(1), the Department determined, and CBP shall assess, antidumping duties on all appropriate entries of subject merchandise, in accordance with the final results of this review. The Department intends to issue assessment instructions to CBP 15 days after the date of publication of these final results of review. Cash Deposit Requirements The following deposit requirements will be effective upon publication of the notice of final results of administrative review for all shipments of BSS from Italy entered, or withdrawn from warehouse, for consumption on or after the date of publication, as provided by section 751(a)(2) of the Act: (1) The cash deposit rate for KME Italy SpA will be equal to the dumping margin established in the final results of this review; (2) for merchandise exported by manufacturers or exporters not covered in this review but covered in a prior segment of the proceeding, the cash deposit rate will continue to be the company-specific rate published for the most recently completed segment of this proceeding; (3) if the exporter is not a firm covered in this review, a prior review, or the less-than-fair-value (LTFV) investigation but the manufacturer is, the cash deposit rate will be the rate established for the most recently completed segment of this proceeding for the manufacturer of the merchandise; and (4) if neither the exporter nor the manufacturer has its 2 See Preliminary Results and accompanying Decision Memorandum. PO 00000 Frm 00011 Fmt 4703 Sfmt 4703 38437 own rate, the cash deposit rate will continue to be 5.44 percent, the allothers rate determined in the LTFV investigation. These deposit requirements, when imposed, shall remain in effect until further notice. Notifications to Importers This notice serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Secretary’s presumption that reimbursement of antidumping duties occurred and the subsequent assessment of doubled antidumping duties. Notification to Interested Parties This notice also serves as a reminder to parties subject to administrative protective orders (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3), which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return/destruction of APO materials, or conversion to judicial protective order, is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation. We are issuing and publishing these results in accordance with sections 751(a)(1) and 777(i)(1) of the Act. Dated: June 26, 2015. Paul Piquado, Assistant Secretary for Enforcement and Compliance. [FR Doc. 2015–16510 Filed 7–2–15; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration United States Manufacturing Council: Meeting of the United States Manufacturing Council International Trade Administration, U.S. Department of Commerce. ACTION: Notice of an open meeting. AGENCY: The United States Manufacturing Council (Council) will hold the second meeting of the current members’ term on Wednesday, July 22, 2015. The Council was established in April 2004 to advise the Secretary of SUMMARY: E:\FR\FM\06JYN1.SGM 06JYN1 38438 Federal Register / Vol. 80, No. 128 / Monday, July 6, 2015 / Notices Commerce on matters relating to the U.S. manufacturing industry. The purpose of the meeting is for the Workforce, Energy, Innovation, Research, & Development, and Tax, Trade, & Export Growth subcommittees to provide relevant updates on their fact finding efforts to the Council as the subcommittees work towards drafting recommendations for consideration by the Manufacturing Council. The Council will also receive briefings from various senior officials across the Department on international trade policy, Manufacturing Day, and Industry & Analysis policy updates. The Council members will follow-up from the Council’s initial meeting to discuss their views on major priorities facing the manufacturing industry and issues that they propose for the Council to advise on during their appointment term. The agenda may change to accommodate Council business. The final agenda will be posted on the Department of Commerce Web site for the Council at https://trade.gov/manufacturingcouncil, at least one week in advance of the meeting. Wednesday, July 22, 2015, 1:00 p.m.–4:00 p.m. The deadline for members of the public to register, including requests to make comments during the meetings and for auxiliary aids, or to submit written comments for dissemination prior to the meeting, is 5 p.m. EDT on July 15, 2015. ADDRESS: The meeting will be held at the U.S. Department of Commerce, Room 3407, 1401 Constitution Avenue NW., Washington, DC 20230. Requests to register (including to speak or for auxiliary aids) and any written comments should be submitted to: U.S. Manufacturing Council, U.S. Department of Commerce, Room 4043, 1401 Constitution Avenue NW., Washington, DC 20230, archana.sahgal@trade.gov. Members of the public are encouraged to submit registration requests and written comments via email to ensure timely receipt. DATES: FOR FURTHER INFORMATION CONTACT: Lhorne on DSK7TPTVN1PROD with NOTICES Archana Sahgal, the United States Manufacturing Council, Room 4043, 1401 Constitution Avenue NW., Washington, DC 20230, telephone: 202– 482–4501, email: archana.sahgal@ trade.gov. SUPPLEMENTARY INFORMATION: Background: The Council advises the Secretary of Commerce on matters relating to the U.S. manufacturing industry. Public Participation: The meeting will be open to the public and will be VerDate Sep<11>2014 14:37 Jul 02, 2015 Jkt 235001 physically accessible to people with disabilities. All guests are required to register in advance by the deadline identified under the DATES caption. The meeting room will be provided upon registration. Seating is limited and will be on a first come, first served basis. Requests for sign language interpretation or other auxiliary aids must be submitted by the registration deadline. Last minute requests will be accepted, but may be impossible to fill. There will be fifteen (15) minutes allotted for oral comments from members of the public attending the meeting. To accommodate as many speakers as possible, the time for public comments may be limited to three (3) minutes per person. Individuals wishing to reserve speaking time during the meeting must submit a request at the time of registration along with a brief statement of the general nature of the comments, as well as the name and address of the proposed speaker. If the number of registrants requesting to make statements is greater than can be reasonably accommodated during the meeting, the International Trade Administration may conduct a lottery to determine the speakers. Speakers are requested to bring at least 25 copies of their oral comments for distribution to the members of the Manufacturing Council and to the public at the meeting. In addition, any member of the public may submit pertinent written comments concerning the Council’s affairs at any time before or after the meeting. Comments may be submitted to Archana Sahgal at the contact information indicated above. To be considered during the meeting, comments must be received no later than 5:00 p.m. EDT on July 15, 2015, to ensure transmission to the Council prior to the meeting. Comments received after that date will be distributed to the members but may not be considered at the meeting. Copies of Council meeting minutes will be available within 90 days of the meeting. Dated: June 29, 2015. Archana Sahgal, Executive Secretary, United States Manufacturing Council. [FR Doc. 2015–16374 Filed 7–2–15; 8:45 am] BILLING CODE 3510–DR–P CORPORATION FOR NATIONAL AND COMMUNITY SERVICE Information Collection; Submission for OMB Review, Comment Request Corporation for National and Community Service. AGENCY: PO 00000 Frm 00012 Fmt 4703 Sfmt 4703 ACTION: Notice. The Corporation for National and Community Service (CNCS) has submitted a modification to a currently approved public information collection request (ICR) entitled Senior Corps Grant Application for review and approval in accordance with the Paperwork Reduction Act of 1995, Public Law 104–13, (44 U.S.C. Chapter 35). Copies of this ICR, with applicable supporting documentation, may be obtained by calling the Corporation for National and Community Service, Tamika Becton, at (202) 606–6644 or email to tbecton@cns.gov Individuals who use a telecommunications device for the deaf (TTY–TDD) may call 1–800– 833–3722 between 8:00 a.m. and 8:00 p.m. Eastern Time, Monday through Friday. SUMMARY: Comments may be submitted, identified by the title of the information collection activity, to the Office of Information and Regulatory Affairs, Attn: Ms. Sharon Mar, OMB Desk Officer for the Corporation for National and Community Service, by any of the following two methods within 30 days from the date of publication in the Federal Register: (1) By fax to: (202) 395–6974, Attention: Ms. Sharon Mar, OMB Desk Officer for the Corporation for National and Community Service; and (2) Electronically by email to: smar@ omb.eop.gov. SUPPLEMENTARY INFORMATION: The OMB is particularly interested in comments which: • Evaluate whether the proposed collection of information is necessary for the proper performance of the functions of CNCS, including whether the information will have practical utility; • Evaluate the accuracy of the agency’s estimate of the burden of the proposed collection of information, including the validity of the methodology and assumptions used; • Propose ways to enhance the quality, utility, and clarity of the information to be collected; and • Propose ways to minimize the burden of the collection of information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting electronic submissions of responses. ADDRESSES: Comments The 60-day Notice soliciting comments was published on December E:\FR\FM\06JYN1.SGM 06JYN1

Agencies

[Federal Register Volume 80, Number 128 (Monday, July 6, 2015)]
[Notices]
[Pages 38437-38438]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-16374]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration


United States Manufacturing Council: Meeting of the United States 
Manufacturing Council

AGENCY: International Trade Administration, U.S. Department of 
Commerce.

ACTION: Notice of an open meeting.

-----------------------------------------------------------------------

SUMMARY: The United States Manufacturing Council (Council) will hold 
the second meeting of the current members' term on Wednesday, July 22, 
2015. The Council was established in April 2004 to advise the Secretary 
of

[[Page 38438]]

Commerce on matters relating to the U.S. manufacturing industry.
    The purpose of the meeting is for the Workforce, Energy, 
Innovation, Research, & Development, and Tax, Trade, & Export Growth 
subcommittees to provide relevant updates on their fact finding efforts 
to the Council as the subcommittees work towards drafting 
recommendations for consideration by the Manufacturing Council. The 
Council will also receive briefings from various senior officials 
across the Department on international trade policy, Manufacturing Day, 
and Industry & Analysis policy updates. The Council members will 
follow-up from the Council's initial meeting to discuss their views on 
major priorities facing the manufacturing industry and issues that they 
propose for the Council to advise on during their appointment term. The 
agenda may change to accommodate Council business. The final agenda 
will be posted on the Department of Commerce Web site for the Council 
at https://trade.gov/manufacturingcouncil, at least one week in advance 
of the meeting.

DATES: Wednesday, July 22, 2015, 1:00 p.m.-4:00 p.m. The deadline for 
members of the public to register, including requests to make comments 
during the meetings and for auxiliary aids, or to submit written 
comments for dissemination prior to the meeting, is 5 p.m. EDT on July 
15, 2015.

ADDRESS: The meeting will be held at the U.S. Department of Commerce, 
Room 3407, 1401 Constitution Avenue NW., Washington, DC 20230. Requests 
to register (including to speak or for auxiliary aids) and any written 
comments should be submitted to: U.S. Manufacturing Council, U.S. 
Department of Commerce, Room 4043, 1401 Constitution Avenue NW., 
Washington, DC 20230, archana.sahgal@trade.gov. Members of the public 
are encouraged to submit registration requests and written comments via 
email to ensure timely receipt.

FOR FURTHER INFORMATION CONTACT: Archana Sahgal, the United States 
Manufacturing Council, Room 4043, 1401 Constitution Avenue NW., 
Washington, DC 20230, telephone: 202-482-4501, email: 
archana.sahgal@trade.gov.

SUPPLEMENTARY INFORMATION:
    Background: The Council advises the Secretary of Commerce on 
matters relating to the U.S. manufacturing industry.
    Public Participation: The meeting will be open to the public and 
will be physically accessible to people with disabilities. All guests 
are required to register in advance by the deadline identified under 
the DATES caption. The meeting room will be provided upon registration. 
Seating is limited and will be on a first come, first served basis. 
Requests for sign language interpretation or other auxiliary aids must 
be submitted by the registration deadline. Last minute requests will be 
accepted, but may be impossible to fill. There will be fifteen (15) 
minutes allotted for oral comments from members of the public attending 
the meeting. To accommodate as many speakers as possible, the time for 
public comments may be limited to three (3) minutes per person. 
Individuals wishing to reserve speaking time during the meeting must 
submit a request at the time of registration along with a brief 
statement of the general nature of the comments, as well as the name 
and address of the proposed speaker. If the number of registrants 
requesting to make statements is greater than can be reasonably 
accommodated during the meeting, the International Trade Administration 
may conduct a lottery to determine the speakers. Speakers are requested 
to bring at least 25 copies of their oral comments for distribution to 
the members of the Manufacturing Council and to the public at the 
meeting.
    In addition, any member of the public may submit pertinent written 
comments concerning the Council's affairs at any time before or after 
the meeting. Comments may be submitted to Archana Sahgal at the contact 
information indicated above. To be considered during the meeting, 
comments must be received no later than 5:00 p.m. EDT on July 15, 2015, 
to ensure transmission to the Council prior to the meeting. Comments 
received after that date will be distributed to the members but may not 
be considered at the meeting. Copies of Council meeting minutes will be 
available within 90 days of the meeting.

    Dated: June 29, 2015.
Archana Sahgal,
Executive Secretary, United States Manufacturing Council.
[FR Doc. 2015-16374 Filed 7-2-15; 8:45 am]
 BILLING CODE 3510-DR-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.