Ball Bearings and Parts Thereof From Japan and the United Kingdom: Final Results of Antidumping Duty Administrative Reviews; 2010-2011, 4248-4250 [2015-01481]
Download as PDF
<![CDATA[
4248
Federal Register / Vol. 80, No. 17 / Tuesday, January 27, 2015 / Notices
deposit for entries of subject
merchandise by Foshan Success. Cash
deposits will be required for exports of
subject merchandise by Foshan Success
entered, or withdrawn from warehouse,
for consumption on or after the
publication date at the PRC-wide rate.
Assessment Instructions
As the result of the rescission of NSR
of Foshan Success, the entries of Foshan
Success covered by this NSR will be
assessed at the PRC-wide rate.
Notification to Importers
This notice serves as a reminder to
importers of their responsibility under
19 CFR 351.402(f)(2) to file a certificate
regarding the reimbursement of
antidumping and/or countervailing
duties prior to liquidation of the
relevant entries during this review
period. Failure to comply with this
requirement could result in the
Secretary of Commerce’s presumption
that reimbursement of the antidumping
and/or countervailing duties occurred
and the subsequent assessment of
double antidumping duties.
Return of Destruction of Proprietary
Information
This notice serves as a reminder to
parties subject to the administrative
protective order (‘‘APO’’) of their
responsibility concerning the
disposition of proprietary information
disclosed under the APO in accordance
with 19 CFR 351.305(a)(3). Timely
written notification of return or
destruction of APO materials, or
conversion to judicial protective order,
is hereby requested. Failure to comply
with the regulations and the terms of an
APO is a sanctionable violation.
This notice is issued and published in
accordance with sections 751(a)(2)(B)
and 777(i) of the Act, and 19 CFR
351.214.
Dated: January 21, 2015.
Paul Piquado,
Assistant Secretary for Enforcement and
Compliance.
asabaliauskas on DSK5VPTVN1PROD with NOTICES
Appendix—List of Topics Discussed in
the Issues and Decision Memorandum
I. Summary
II. Background
III. Scope of the Order
IV. Discussion of the Issues
Comment 1: Whether Foshan Success’ Sale is
Bona Fide
[FR Doc. 2015–01502 Filed 1–26–15; 8:45 am]
BILLING CODE 3510–DS–P
VerDate Sep<11>2014
18:01 Jan 26, 2015
Jkt 235001
DEPARTMENT OF COMMERCE
International Trade Administration
[A–588–804, A–412–801]
Ball Bearings and Parts Thereof From
Japan and the United Kingdom: Final
Results of Antidumping Duty
Administrative Reviews; 2010–2011
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: On September 23, 2014, the
Department of Commerce (the
Department) published the preliminary
results of the administrative reviews of
the antidumping duty orders on ball
bearings and parts thereof from Japan
and the United Kingdom.1 2 The period
of review (POR) is May 1, 2010, through
April 30, 2011. For these final results,
we continue to find that sales of the
subject merchandise have been made at
prices below normal value.
DATES: Effective Date: January 27, 2015.
FOR FURTHER INFORMATION CONTACT:
Thomas Schauer, AD/CVD Operations,
Office I, Enforcement and Compliance,
International Trade Administration,
U.S. Department of Commerce, 14th
Street and Constitution Avenue NW.,
Washington, DC 20230; telephone: (202)
482–0410.
SUPPLEMENTARY INFORMATION:
AGENCY:
Background
On September 23, 2014, the
Department published, and invited
interested parties to comment on, the
Preliminary Results.3 We received case
and rebuttal briefs from various parties
to the United Kingdom review and held
a hearing on December 4, 2014, for the
United Kingdom review. We received
no case and rebuttal briefs from
interested parties for the Japan review.
The Department conducted these
administrative reviews in accordance
with section 751 of the Tariff Act of
1930, as amended (the Act).
Scope of the Orders
The products covered by the Orders
are ball bearings and parts thereof.
1 See Ball Bearings and Parts Thereof From Japan
and the United Kingdom: Preliminary Results of
Antidumping Duty Administrative Review; 2010–
2011, 79 FR 56771 (September 23, 2014)
(Preliminary Results).
2 See Antidumping Duty Orders: Ball Bearings,
Cylindrical Roller Bearings, and Spherical Plain
Bearings, and Parts Thereof From Japan, 54 FR
20904 (May 15, 1989), and Antidumping Duty
Orders and Amendments to the Final
Determinations of Sales at Less Than Fair Value:
Ball Bearings, and Cylindrical Roller Bearings and
Parts Thereof From the United Kingdom, 54 FR
20910 (May 15, 1989).
3 Id.
PO 00000
Frm 00006
Fmt 4703
Sfmt 4703
These products include all antifriction
bearings that employ balls as the rolling
element. Imports of these products are
classified under the following
categories: antifriction balls, ball
bearings with integral shafts, ball
bearings (including radial ball bearings)
and parts thereof, and housed or
mounted ball bearing units and parts
thereof.
Imports of these products are
classified under the following
Harmonized Tariff Schedule of the
United States (HTSUS) subheadings:
3926.90.45, 4016.93.10, 4016.93.50,
6909.19.50.10, 8414.90.41.75,
8431.20.00, 8431.39.00.10, 8482.10.10,
8482.10.50, 8482.80.00, 8482.91.00,
8482.99.05, 8482.99.35, 8482.99.25.80,
8482.99.65.95, 8483.20.40, 8483.20.80,
8483.30.40, 8483.30.80, 8483.50.90,
8483.90.20, 8483.90.30, 8483.90.70,
8708.50.50, 8708.60.50, 8708.60.80,
8708.93.30, 8708.93.60.00, 8708.99.06,
8708.99.31.00, 8708.99.40.00,
8708.99.49.60, 8708.99.58,
8708.99.80.15, 8708.99.80.80,
8803.10.00, 8803.20.00, 8803.30.00,
8803.90.30, 8803.90.90, 8708.30.50.90,
8708.40.75.70, 8708.40.75.80,
8708.50.79.00, 8708.50.89.00,
8708.50.91.50, 8708.50.99.00,
8708.70.60.60, 8708.80.65.90,
8708.93.75.00, 8708.94.75,
8708.95.20.00, 8708.99.55.00,
8708.99.68, and 8708.99.81.80.
Although the HTSUS item numbers
above are provided for convenience and
customs purposes, the written
description of the scope of the orders
remains dispositive.
The size or precision grade of a
bearing does not influence whether the
bearing is covered by one of the orders.
The orders cover all the subject bearings
and parts thereof (inner race, outer race,
cage, rollers, balls, seals, shields, etc.)
outlined above with certain limitations.
With regard to finished parts, all such
parts are included in the scope of the
orders. For unfinished parts, such parts
are included if they have been heattreated or if heat treatment is not
required to be performed on the part.
Thus, the only unfinished parts that are
not covered by the orders are those that
will be subject to heat treatment after
importation. The ultimate application of
a bearing also does not influence
whether the bearing is covered by the
orders. Bearings designed for highly
specialized applications are not
excluded. Any of the subject bearings,
regardless of whether they may
ultimately be utilized in aircraft,
automobiles, or other equipment, are
within the scope of the orders.
E:\FR\FM\27JAN1.SGM
27JAN1
4249
Federal Register / Vol. 80, No. 17 / Tuesday, January 27, 2015 / Notices
Analysis of the Comments Received
All issues raised in the case briefs by
parties to the United Kingdom
administrative review are addressed in
the Issues and Decision Memorandum.4
A list of the issues which parties raised
and to which we responded is in the
Issues and Decision Memorandum and
attached to this notice as an Appendix.
The Issues and Decision Memorandum
is a public document and is on file
electronically via Enforcement and
Compliance’s Antidumping and
Countervailing Duty Centralized
Electronic Service System (ACCESS).5
ACCESS is available to registered users
at https://access.trade.gov and it is
available to all parties in the Central
Records Unit (CRU), room 7046 of the
main Department of Commerce
building. In addition, a complete
version of the Issues and Decision
Memorandum can be accessed directly
on the internet at https://
enforcement.trade.gov/frn/.
Changes Since the Preliminary Results
We made no changes since the
Preliminary Results.
Final Results of the Reviews
We determine that weighted-average
dumping margins on ball bearings and
parts thereof exist for the period May 1,
2010, through April 30, 2011, at the
following rates:
Weighted-average
dumping margin
(percent)
Company
JAPAN
Bosch Packaging Technology K.K ......................................................................................................................................
Bosch Rexroth Corporation .................................................................................................................................................
Hagglunds Ltd ......................................................................................................................................................................
106.61
106.61
106.61
UNITED KINGDOM
Bayerische Motoren Werke AG ...........................................................................................................................................
Bosch Rexroth Limited ........................................................................................................................................................
Caterpillar S.A.R.L ...............................................................................................................................................................
Caterpillar Group Services S.A ...........................................................................................................................................
Caterpillar of Australia Pty Ltd .............................................................................................................................................
Caterpillar Overseas S.A.R.L ..............................................................................................................................................
Caterpillar Marine Power UK ...............................................................................................................................................
NSK ......................................................................................................................................................................................
Perkins Engines Company Ltd ............................................................................................................................................
Assessment Rates
asabaliauskas on DSK5VPTVN1PROD with NOTICES
The Department shall determine, and
U.S. Customs and Border Protection
(CBP) shall assess, antidumping duties
on all appropriate entries. In accordance
with 19 CFR 351.212(b)(1), for NSK we
calculated an importer-specific
assessment rate by dividing the total
amount of dumping for the reviewed
sales by the total entered vale of those
reviewed sales for each importer.
The Department clarified its
‘‘automatic assessment’’ regulation on
May 6, 2003. This clarification will
apply to entries of subject merchandise
during the POR produced by NSK, for
which it did not know its merchandise
was destined for the United States. We
will instruct CBP to liquidate
unreviewed entries at the countryspecific all-others rate if there is no rate
for the intermediate company(ies)
involved in the transaction.6
4 See the memorandum from Deputy Assistant
Secretary Christian Marsh to Assistant Secretary
Paul Piquado entitled, ‘‘Issues and Decision
Memorandum for the Antidumping Duty
Administrative Review of Ball Bearings and Parts
Thereof from the United Kingdom; 2010–2011,’’
dated concurrently with and hereby adopted by this
notice (Issues and Decision Memorandum).
VerDate Sep<11>2014
18:01 Jan 26, 2015
Jkt 235001
For the companies which were not
selected for individual examination and
for the companies to which we are
applying adverse facts available, we will
instruct CBP to assess antidumping
duties at a rate equal to the weightedaverage dumping margin listed above to
all entries of subject merchandise
produced and/or exported by such
firms.
We intend to issue liquidation
instructions to CBP 15 days after
publication of the final results of these
administrative reviews.
Cash Deposit Requirements
Because we revoked the antidumping
duty orders on ball bearings and parts
thereof from Japan and the United
Kingdom effective September 15, 2011,
no cash deposits for estimated
antidumping duties on future entries of
subject merchandise will be required.7
5 On November 24, 2014, Enforcement and
Compliance changed the name of Enforcement and
Compliance’s AD and CVD Centralized Electronic
Service System (‘‘IA ACCESS’’) to AD and CVD
Centralized Electronic Service System (‘‘ACCESS’’).
The Web site location was changed from https://
iaaccess.trade.gov to https://access.trade.gov. The
Final Rule changing the references to the
Regulations can be found at 79 FR 69046
(November 20, 2014).
PO 00000
Frm 00007
Fmt 4703
Sfmt 4703
254.25
1.55
1.55
1.55
1.55
1.55
1.55
1.55
1.55
Notifications
This notice serves as a final reminder
to importers of their responsibility
under 19 CFR 351.402(f)(2) to file a
certificate regarding the reimbursement
of antidumping duties prior to
liquidation of the relevant entries
during this review period. Failure to
comply with this requirement could
result in the Department’s presumption
that reimbursement of antidumping
duties occurred and the subsequent
assessment of doubled antidumping
duties.
This notice also serves as a reminder
to parties subject to administrative
protective order (APO) of their
responsibility concerning the
disposition of proprietary information
disclosed under APO in accordance
with 19 CFR 351.305(a)(3). Timely
written notification of the return or the
destruction of APO materials or
conversion to judicial protective order is
6 For a full discussion of this clarification, see
Antidumping and Countervailing Duty Proceedings:
Assessment of Antidumping Duties, 68 FR 23954
(May 6, 2003).
7 See Ball Bearings and Parts Thereof From Japan
and the United Kingdom: Final Results of Sunset
Reviews and Revocation of Antidumping Duty
Orders, 79 FR 16771 (March 26, 2014).
E:\FR\FM\27JAN1.SGM
27JAN1
4250
Federal Register / Vol. 80, No. 17 / Tuesday, January 27, 2015 / Notices
hereby requested. Failure to comply
with the regulations and the terms of an
APO is a sanctionable violation.
These final results of administrative
reviews are issued and published in
accordance with sections 751(a)(1) and
777(i)(1) of the Act.
Dated: January 21, 2015.
Paul Piquado,
Assistant Secretary for Enforcement and
Compliance.
Appendix
I. Summary
II. Background
III. Company Abbreviations
IV. Sales Below Cost in the Home Market
V. Discussion of the Issues
1. Application of an Alternative
Comparison Methodology
2. Resumption of the Review
3. Adverse Facts Available
4. Adverse-Facts-Available Rate
VI. Recommendation
The Department of Commerce
(Department) preliminarily determines
that certain Passenger Vehicle and Light
Truck Tires (passenger tires) from the
People’s Republic of China (PRC) are
being, or are likely to be, sold in the
United States at less than fair value
(LTFV), as provided in section 733(b) of
the Tariff Act of 1930, as amended (the
Act). The period of investigation (POI)
is October 1, 2013, through March 31,
2014. The estimated weighted-average
dumping margins of sales at LTFV are
shown in the ‘‘Preliminary
Determination’’ section of this notice.
Interested parties are invited to
comment on this preliminary
determination.
SUMMARY:
Effective Date: January 27, 2015.
Toni
Page, Lingjun Wang, or Jun Jack Zhao,
AD/CVD Operations, Office VII,
Enforcement and Compliance,
International Trade Administration,
U.S. Department of Commerce, 14th
Street and Constitution Avenue NW.,
Washington, DC 20230; telephone: (202)
482–1398, (202) 482–2316, or (202) 482–
1396, respectively.
SUPPLEMENTARY INFORMATION:
DATES:
FOR FURTHER INFORMATION CONTACT:
[FR Doc. 2015–01481 Filed 1–26–15; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–570–016]
Certain Passenger Vehicle and Light
Truck Tires From the People’s
Republic of China: Preliminary
Determination of Sales at Less Than
Fair Value; Preliminary Affirmative
Determination of Critical
Circumstances; In Part and
Postponement of Final Determination
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
AGENCY:
asabaliauskas on DSK5VPTVN1PROD with NOTICES
Combination Rates
The Department published the notice
of initiation of this investigation on July
21, 2014.1 Pursuant to section
733(c)(1)(A) of the Act, on October 9,
2014, the Department postponed this
preliminary LTFV determination by a
period of 50 days.2
Preliminary Determination
Scope of the Investigation
On December 30, 2014, the
Department published an amended
The Department preliminarily
determines that the following weightedaverage dumping margins exist for the
exporter-producer combinations listed
below during the period October 1,
2013, through March 31, 2014:
Weightedaverage
dumping
margin
(percent)
Producer(s)
1 See Certain Passenger Vehicle and Light Truck
Tires From the People’s Republic of China:
Initiation of Antidumping Duty Investigation, 79 FR
42292 (July 21, 2014) (Initiation Notice).
2 See Certain Passenger Vehicle and Light Truck
Tires From the People’s Republic of China:
Postponement of Preliminary Determination of
Antidumping Duty Investigation, 79 FR 61052
(October 9, 2014).
3 See Countervailing Duty Investigation of Certain
Passenger Vehicle and Light Truck Tires From the
Jkt 235001
The Department conducted this
investigation in accordance with section
731 of the Act. We calculated export
prices and constructed export prices in
accordance with section 772 of the Act.
Because the PRC is a non-market
economy within the meaning of section
771(18) of the Act, we calculated normal
value (NV) in accordance with section
773(c) of the Act.
For a full description of the
methodology underlying our
conclusions, see the Preliminary
Decision Memorandum.4
Background
GITI:
Giti Tire Global Trading Pte. Ltd., Giti Tire (USA) Ltd., Giti
Tire (Anhui) Company Ltd., Giti Tire (Fujian) Company
Ltd., Giti Tire (Hualin) Company Ltd.
Sailun Group:
Sailun Group Co., Ltd., Sailun Tire International Corp.,
Shandong Jinyu Industrial Co., Ltd., Jinyu International
Holding Co., Limited, Seatex International Inc., Dynamic
Tire Corp., Husky Tire Corp., Seatex PTE. Ltd.
18:01 Jan 26, 2015
Methodology
In the Initiation Notice, the
Department stated that it would
calculate combination rates for the
respondents that are eligible for a
separate rate in this investigation. Policy
Bulletin 05.1 describes this practice.5
Exporter(s)
VerDate Sep<11>2014
preliminary determination in the
companion countervailing duty (CVD)
investigation of passenger tires from the
PRC, which contains an amended scope
of this investigation.3 For a full
description of the amended scope of this
investigation, see ‘‘Scope of
Investigation’’ at Appendix I of this
notice.
Giti Tire (Anhui) Company Ltd., Giti Tire (Fujian) Company
Ltd., Giti Tire (Hualin) Company Ltd.
19.17
Sailun Group Co., Ltd., Shandong Jinyu Industrial Co., Ltd .....
36.26
People’s Republic of China: Amended Affirmative
Preliminary Determination, 79 FR 78398 (December
30, 2014) at Appendix-Scope of the Investigation.
4 See Memorandum to Paul Piquado, Assistant
Secretary for Enforcement and Compliance,
‘‘Decision Memorandum for the Preliminary
Determination in the Antidumping Duty
Investigation of Certain Passenger Vehicle and Light
Truck Tires From the People’s Republic of China’’
(January 20, 2015) (Preliminary Decision
Memorandum). A list of topics discussed in the
PO 00000
Frm 00008
Fmt 4703
Sfmt 4703
Preliminary Decision Memorandum is found at
Appendix II of this notice.
5 See Enforcement and Compliance’s Policy
Bulletin No. 05.1, regarding, ‘‘Separate-Rates
Practice and Application of Combination Rates in
Antidumping Investigations involving Non-Market
Economy Countries,’’ (April 5, 2005) (Policy
Bulletin 05.1), available on the Department’s Web
site at https://enforcement.trade.gov/policy/bull051.pdf.
E:\FR\FM\27JAN1.SGM
27JAN1
]]>Agencies
[Federal Register Volume 80, Number 17 (Tuesday, January 27, 2015)]
[Notices]
[Pages 4248-4250]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2015-01481]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
[A-588-804, A-412-801]
Ball Bearings and Parts Thereof From Japan and the United
Kingdom: Final Results of Antidumping Duty Administrative Reviews;
2010-2011
AGENCY: Enforcement and Compliance, International Trade Administration,
Department of Commerce.
SUMMARY: On September 23, 2014, the Department of Commerce (the
Department) published the preliminary results of the administrative
reviews of the antidumping duty orders on ball bearings and parts
thereof from Japan and the United Kingdom.\1 2\ The period of review
(POR) is May 1, 2010, through April 30, 2011. For these final results,
we continue to find that sales of the subject merchandise have been
made at prices below normal value.
---------------------------------------------------------------------------
\1\ See Ball Bearings and Parts Thereof From Japan and the
United Kingdom: Preliminary Results of Antidumping Duty
Administrative Review; 2010-2011, 79 FR 56771 (September 23, 2014)
(Preliminary Results).
\2\ See Antidumping Duty Orders: Ball Bearings, Cylindrical
Roller Bearings, and Spherical Plain Bearings, and Parts Thereof
From Japan, 54 FR 20904 (May 15, 1989), and Antidumping Duty Orders
and Amendments to the Final Determinations of Sales at Less Than
Fair Value: Ball Bearings, and Cylindrical Roller Bearings and Parts
Thereof From the United Kingdom, 54 FR 20910 (May 15, 1989).
---------------------------------------------------------------------------
DATES: Effective Date: January 27, 2015.
FOR FURTHER INFORMATION CONTACT: Thomas Schauer, AD/CVD Operations,
Office I, Enforcement and Compliance, International Trade
Administration, U.S. Department of Commerce, 14th Street and
Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-
0410.
SUPPLEMENTARY INFORMATION:
Background
On September 23, 2014, the Department published, and invited
interested parties to comment on, the Preliminary Results.\3\ We
received case and rebuttal briefs from various parties to the United
Kingdom review and held a hearing on December 4, 2014, for the United
Kingdom review. We received no case and rebuttal briefs from interested
parties for the Japan review. The Department conducted these
administrative reviews in accordance with section 751 of the Tariff Act
of 1930, as amended (the Act).
---------------------------------------------------------------------------
\3\ Id.
---------------------------------------------------------------------------
Scope of the Orders
The products covered by the Orders are ball bearings and parts
thereof. These products include all antifriction bearings that employ
balls as the rolling element. Imports of these products are classified
under the following categories: antifriction balls, ball bearings with
integral shafts, ball bearings (including radial ball bearings) and
parts thereof, and housed or mounted ball bearing units and parts
thereof.
Imports of these products are classified under the following
Harmonized Tariff Schedule of the United States (HTSUS) subheadings:
3926.90.45, 4016.93.10, 4016.93.50, 6909.19.50.10, 8414.90.41.75,
8431.20.00, 8431.39.00.10, 8482.10.10, 8482.10.50, 8482.80.00,
8482.91.00, 8482.99.05, 8482.99.35, 8482.99.25.80, 8482.99.65.95,
8483.20.40, 8483.20.80, 8483.30.40, 8483.30.80, 8483.50.90, 8483.90.20,
8483.90.30, 8483.90.70, 8708.50.50, 8708.60.50, 8708.60.80, 8708.93.30,
8708.93.60.00, 8708.99.06, 8708.99.31.00, 8708.99.40.00, 8708.99.49.60,
8708.99.58, 8708.99.80.15, 8708.99.80.80, 8803.10.00, 8803.20.00,
8803.30.00, 8803.90.30, 8803.90.90, 8708.30.50.90, 8708.40.75.70,
8708.40.75.80, 8708.50.79.00, 8708.50.89.00, 8708.50.91.50,
8708.50.99.00, 8708.70.60.60, 8708.80.65.90, 8708.93.75.00, 8708.94.75,
8708.95.20.00, 8708.99.55.00, 8708.99.68, and 8708.99.81.80.
Although the HTSUS item numbers above are provided for convenience
and customs purposes, the written description of the scope of the
orders remains dispositive.
The size or precision grade of a bearing does not influence whether
the bearing is covered by one of the orders. The orders cover all the
subject bearings and parts thereof (inner race, outer race, cage,
rollers, balls, seals, shields, etc.) outlined above with certain
limitations. With regard to finished parts, all such parts are included
in the scope of the orders. For unfinished parts, such parts are
included if they have been heat-treated or if heat treatment is not
required to be performed on the part. Thus, the only unfinished parts
that are not covered by the orders are those that will be subject to
heat treatment after importation. The ultimate application of a bearing
also does not influence whether the bearing is covered by the orders.
Bearings designed for highly specialized applications are not excluded.
Any of the subject bearings, regardless of whether they may ultimately
be utilized in aircraft, automobiles, or other equipment, are within
the scope of the orders.
[[Page 4249]]
Analysis of the Comments Received
All issues raised in the case briefs by parties to the United
Kingdom administrative review are addressed in the Issues and Decision
Memorandum.\4\ A list of the issues which parties raised and to which
we responded is in the Issues and Decision Memorandum and attached to
this notice as an Appendix. The Issues and Decision Memorandum is a
public document and is on file electronically via Enforcement and
Compliance's Antidumping and Countervailing Duty Centralized Electronic
Service System (ACCESS).\5\ ACCESS is available to registered users at
https://access.trade.gov and it is available to all parties in the
Central Records Unit (CRU), room 7046 of the main Department of
Commerce building. In addition, a complete version of the Issues and
Decision Memorandum can be accessed directly on the internet at https://enforcement.trade.gov/frn/.
---------------------------------------------------------------------------
\4\ See the memorandum from Deputy Assistant Secretary Christian
Marsh to Assistant Secretary Paul Piquado entitled, ``Issues and
Decision Memorandum for the Antidumping Duty Administrative Review
of Ball Bearings and Parts Thereof from the United Kingdom; 2010-
2011,'' dated concurrently with and hereby adopted by this notice
(Issues and Decision Memorandum).
\5\ On November 24, 2014, Enforcement and Compliance changed the
name of Enforcement and Compliance's AD and CVD Centralized
Electronic Service System (``IA ACCESS'') to AD and CVD Centralized
Electronic Service System (``ACCESS''). The Web site location was
changed from https://iaaccess.trade.gov to https://access.trade.gov.
The Final Rule changing the references to the Regulations can be
found at 79 FR 69046 (November 20, 2014).
---------------------------------------------------------------------------
Changes Since the Preliminary Results
We made no changes since the Preliminary Results.
Final Results of the Reviews
We determine that weighted-average dumping margins on ball bearings
and parts thereof exist for the period May 1, 2010, through April 30,
2011, at the following rates:
------------------------------------------------------------------------
Weighted-average
Company dumping margin
(percent)
------------------------------------------------------------------------
JAPAN
------------------------------------------------------------------------
Bosch Packaging Technology K.K................. 106.61
Bosch Rexroth Corporation...................... 106.61
Hagglunds Ltd.................................. 106.61
------------------------------------------------------------------------
UNITED KINGDOM
------------------------------------------------------------------------
Bayerische Motoren Werke AG.................... 254.25
Bosch Rexroth Limited.......................... 1.55
Caterpillar S.A.R.L............................ 1.55
Caterpillar Group Services S.A................. 1.55
Caterpillar of Australia Pty Ltd............... 1.55
Caterpillar Overseas S.A.R.L................... 1.55
Caterpillar Marine Power UK.................... 1.55
NSK............................................ 1.55
Perkins Engines Company Ltd.................... 1.55
------------------------------------------------------------------------
Assessment Rates
The Department shall determine, and U.S. Customs and Border
Protection (CBP) shall assess, antidumping duties on all appropriate
entries. In accordance with 19 CFR 351.212(b)(1), for NSK we calculated
an importer-specific assessment rate by dividing the total amount of
dumping for the reviewed sales by the total entered vale of those
reviewed sales for each importer.
The Department clarified its ``automatic assessment'' regulation on
May 6, 2003. This clarification will apply to entries of subject
merchandise during the POR produced by NSK, for which it did not know
its merchandise was destined for the United States. We will instruct
CBP to liquidate unreviewed entries at the country-specific all-others
rate if there is no rate for the intermediate company(ies) involved in
the transaction.\6\
---------------------------------------------------------------------------
\6\ For a full discussion of this clarification, see Antidumping
and Countervailing Duty Proceedings: Assessment of Antidumping
Duties, 68 FR 23954 (May 6, 2003).
---------------------------------------------------------------------------
For the companies which were not selected for individual
examination and for the companies to which we are applying adverse
facts available, we will instruct CBP to assess antidumping duties at a
rate equal to the weighted-average dumping margin listed above to all
entries of subject merchandise produced and/or exported by such firms.
We intend to issue liquidation instructions to CBP 15 days after
publication of the final results of these administrative reviews.
Cash Deposit Requirements
Because we revoked the antidumping duty orders on ball bearings and
parts thereof from Japan and the United Kingdom effective September 15,
2011, no cash deposits for estimated antidumping duties on future
entries of subject merchandise will be required.\7\
---------------------------------------------------------------------------
\7\ See Ball Bearings and Parts Thereof From Japan and the
United Kingdom: Final Results of Sunset Reviews and Revocation of
Antidumping Duty Orders, 79 FR 16771 (March 26, 2014).
---------------------------------------------------------------------------
Notifications
This notice serves as a final reminder to importers of their
responsibility under 19 CFR 351.402(f)(2) to file a certificate
regarding the reimbursement of antidumping duties prior to liquidation
of the relevant entries during this review period. Failure to comply
with this requirement could result in the Department's presumption that
reimbursement of antidumping duties occurred and the subsequent
assessment of doubled antidumping duties.
This notice also serves as a reminder to parties subject to
administrative protective order (APO) of their responsibility
concerning the disposition of proprietary information disclosed under
APO in accordance with 19 CFR 351.305(a)(3). Timely written
notification of the return or the destruction of APO materials or
conversion to judicial protective order is
[[Page 4250]]
hereby requested. Failure to comply with the regulations and the terms
of an APO is a sanctionable violation.
These final results of administrative reviews are issued and
published in accordance with sections 751(a)(1) and 777(i)(1) of the
Act.
Dated: January 21, 2015.
Paul Piquado,
Assistant Secretary for Enforcement and Compliance.
Appendix
I. Summary
II. Background
III. Company Abbreviations
IV. Sales Below Cost in the Home Market
V. Discussion of the Issues
1. Application of an Alternative Comparison Methodology
2. Resumption of the Review
3. Adverse Facts Available
4. Adverse-Facts-Available Rate
VI. Recommendation
[FR Doc. 2015-01481 Filed 1-26-15; 8:45 am]
BILLING CODE 3510-DS-P
