Servicing Multi-Piece and Single Piece Rim Wheels; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements, 60502-60503 [2014-23898]
Download as PDF
<![CDATA[
60502
Federal Register / Vol. 79, No. 194 / Tuesday, October 7, 2014 / Notices
Dated: September 26, 2014.
Joseph T. Rannazzisi,
Deputy Assistant Administrator.
The company plans to import these
controlled substances for the
manufacture of reference standards.
[FR Doc. 2014–23827 Filed 10–6–14; 8:45 am]
BILLING CODE 4410–09–P
Dated: September 25, 2014.
Joseph T. Rannazzisi,
Deputy Assistant Administrator.
DEPARTMENT OF JUSTICE
[FR Doc. 2014–23830 Filed 10–6–14; 8:45 am]
BILLING CODE 4410–09–P
Drug Enforcement Administration
[Docket No. DEA–392]
DEPARTMENT OF LABOR
Importer of Controlled Substances
Registration: Alltech Associates, Inc.
ACTION:
Notice of registration.
[Docket No. OSHA–2011–0189]
Alltech Associates, Inc.,
applied to be registered as an importer
of certain basic classes of controlled
substances. The DEA grants Alltech
Associates, Inc., registration as an
importer of those controlled substances.
SUPPLEMENTARY INFORMATION: By notice
dated May 28, 2014, and published in
the Federal Register on June 3, 2014, 79
FR 31986, Alltech Associates, Inc., 2051
Waukegan Road, Deerfield, Illinois
60015, applied to be registered as an
importer of certain basic classes of
controlled substances. No comments or
objections were submitted for this
notice.
The Drug Enforcement
Administration (DEA) has considered
the factors in 21 U.S.C. 823, 952(a) and
958(a) and determined that the
registration of Alltech Associates, Inc.,
to import the basic classes of controlled
substances is consistent with the public
interest and with United States
obligations under international treaties,
conventions, or protocols in effect on
May 1, 1971. The DEA investigated the
company’s maintenance of effective
controls against diversion by inspecting
and testing the company’s physical
security systems, verifying the
company’s compliance with state and
local laws, and reviewing the company’s
background and history.
Therefore, pursuant to 21 U.S.C.
952(a) and 958(a), and in accordance
with 21 CFR 1301.34, the above-named
company is granted registration as an
importer of the basic classes of
controlled substances listed:
SUMMARY:
asabaliauskas on DSK5VPTVN1PROD with NOTICES
Controlled substance
Schedule
Gamma
Hydroxybutyric
Acid
(2010).
Lysergic acid diethylamide (7315)
Heroin (9200) ...............................
Cocaine (9041) .............................
Codeine (9050) .............................
Hydrocodone (9193) .....................
Meperidine (9230) ........................
Methadone (9250) ........................
Morphine (9300) ...........................
VerDate Sep<11>2014
17:15 Oct 06, 2014
Occupational Safety and Health
Administration
I
I
I
II
II
II
II
II
II
Jkt 235001
Servicing Multi-Piece and Single Piece
Rim Wheels; Extension of the Office of
Management and Budget’s (OMB)
Approval of Information Collection
(Paperwork) Requirements
Occupational Safety and Health
Administration, Labor.
ACTION: Request for public comments.
AGENCY:
OSHA solicits public
comments concerning its proposal to
extend the Office of Management and
Budget’s (OMB) approval of the
information collection requirements
specified in the Standard on Servicing
Multi-Piece and Single Piece Rim
Wheels (29 CFR 1910.177). The
paperwork provisions of the Standard
includes a requirement that the
manufacturer or a Registered
Professional Engineer certify that
repaired restraining devices and barriers
meet the strength requirements
specified in the Standard and a
requirement that defective wheels and
wheel components be marked or tagged.
DATES: Comments must be submitted
(postmarked, sent, or received) by
December 8, 2014.
ADDRESSES: Electronically: You may
submit comments and attachments
electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for submitting
comments.
Facsimile: If your comments,
including attachments, are not longer
than 10 pages you may fax them to the
OSHA Docket Office at (202) 693–1648.
Mail, hand delivery, express mail,
messenger, or courier service: When
using this method, you must submit a
copy of your comments and attachments
to the OSHA Docket Office, Docket No.
OSHA–2011–0189, Occupational Safety
and Health Administration, U.S.
Department of Labor, Room N–2625,
200 Constitution Avenue NW.,
Washington, DC 20210. Deliveries
(hand, express mail, messenger, and
SUMMARY:
PO 00000
Frm 00059
Fmt 4703
Sfmt 4703
courier services) are accepted during the
Department of Labor’s and Docket
Office’s normal business hours, 8:15
a.m. to 4:45 p.m., e.t.
Instructions: All submissions must
include the Agency name and OSHA
docket number (OSHA–2011–0189) for
the Information Collection Request
(ICR). All comments, including any
personal information you provide, are
placed in the docket without change
and may be made available online at
https://www.regulations.gov. For further
information on submitting comments
see the ‘‘Public Participation’’ heading
in the section of this notice titled
‘‘SUPPLEMENTARY INFORMATION.’’
Docket: To read or download
comments or other materials in the
docket, go to https://www.regulations.gov
or the OSHA Docket Office at the
address above. All documents in the
docket (including this Federal Register
notice) are listed in the https://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download from the Web site. All
submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
You may also contact Theda Kenney at
the address below to obtain a copy of
the ICR.
FOR FURTHER INFORMATION CONTACT:
Theda Kenney or Todd Owen,
Directorate of Standards and Guidance,
OSHA, U.S. Department of Labor, Room
N–3609, 200 Constitution Avenue NW.,
Washington, DC 20210; telephone (202)
693–2222.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of its
continuing effort to reduce paperwork
and respondent (i.e., employer) burden,
conducts a preclearance consultation
program to provide the public with an
opportunity to comment on proposed
and continuing information collection
requirements in accord with the
Paperwork Reduction Act of 1995
(PRA–95) (44 U.S.C. 3506(c)(2)(A)). This
program ensures that information is in
the desired format, reporting burden
(time and costs) is minimal, collection
instruments are clearly understood, and
OSHA’s estimate of the information
collection burden is accurate. The
Occupational Safety and Health Act of
1970 (the OSH Act) (29 U.S.C. 651 et
seq.) authorizes information collection
by employers as necessary or
appropriate for enforcement of the OSH
Act or for developing information
regarding the causes and prevention of
occupational injuries, illnesses, and
E:\FR\FM\07OCN1.SGM
07OCN1
Federal Register / Vol. 79, No. 194 / Tuesday, October 7, 2014 / Notices
accidents (29 U.S.C. 657). The OSH Act
also requires that OSHA obtain such
information with minimum burden
upon employers, especially those
operating small businesses, and to
reduce to the maximum extent feasible
unnecessary duplication of efforts in
obtaining information (29 U.S.C. 657).
Certification of repair
(§ 1910.177(d)(3)(iv)). This paragraph
requires that when restraining devices
and barriers are removed from service
because they are defective, they shall
not be returned to service until they are
repaired and reinspected. If the repair is
structural, the manufacturer or a
Registered Professional Engineer must
certify that the strength requirements
specified in (§ 1910.177(d)(3)(i) of the
Standard have been met.
The certification records are used to
assure that equipment has been properly
repaired. The certification records also
provide the most efficient means for
OSHA compliance officers to determine
that an employer is complying with the
Standard.
Marking or tagging of wheel
components (§ 1910.177(e)(2)). This
paragraph requires that defective wheels
and wheel components ‘‘be marked or
tagged unserviceable and removed from
the service area.’’ Under this
requirement, OSHA is providing
employers with sufficient information
from which they can derive the wording
to use in marking the object or
constructing a tag. Therefore, this
provision imposes no paperwork burden
because it falls within the portion of 5
CFR 1320(c)(2) that states, ‘‘The public
disclosure of information originally
supplied by the Federal government to
the recipient for the purpose of
disclosure to the public is not included
within this definition [of ‘collection of
information’]’’.
asabaliauskas on DSK5VPTVN1PROD with NOTICES
II. Special Issues for Comment
OSHA has a particular interest in
comments on the following issues:
• Whether the proposed information
collection requirements are necessary
for the proper performance of the
Agency’s functions, including whether
the information is useful;
• The accuracy of OSHA’s estimate of
the burden (time and costs) of the
information collection requirements,
including the validity of the
methodology and assumptions used;
• The quality, utility, and clarity of
the information collected; and
• Ways to minimize the burden on
employers who must comply; for
example, by using automated or other
technological information collection
and transmission techniques.
VerDate Sep<11>2014
17:15 Oct 06, 2014
Jkt 235001
III. Proposed Actions
OSHA is requesting that OMB extend
its approval of the information
collection requirements contained in the
Standard on Servicing Multi-Piece and
Single Piece Rim Wheels (29 CFR
1910.177). OSHA is proposing to retain
its current burden hour estimate of one
(1) hour. The Agency will summarize
any comments submitted in response to
this notice and will include this
summary in its request to OMB.
Type of Review: Extension of a
currently approved collection.
Title: Servicing Multi-Piece and
Single Piece Rim Wheels (29 CFR
1910.177).
OMB Control Number: 1218–0219.
Affected Public: Business or other forprofits.
Number of Respondents: 80.
Frequency of Responses: On occasion.
Average Time per Response: Three (3)
minutes (.05 hour) to maintain a
certificate verifying proper repair of a
restraining device or barrier and to
disclose the repair certificate to an
OSHA Compliance Officer.
Estimated Total Burden Hours: 1.
Estimated Cost (Operation and
Maintenance): $0.
IV. Public Participation—Submission of
Comments on This Notice and Internet
Access to Comments and Submissions
You may submit comments in
response to this document as follows:
(1) Electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal; (2) by
facsimile (fax); or (3) by hard copy. All
comments, attachments, and other
materials must identify the Agency
name and the OSHA docket number
(Docket No. OSHA–2011–0189) for the
ICR. You may supplement electronic
submissions by uploading document
files electronically. If you wish to mail
additional materials in reference to an
electronic or facsimile submission, you
must submit them to the OSHA Docket
Office (see the section of this notice
titled ‘‘ADDRESSES’’). The additional
materials must clearly identify your
electronic comments by your name,
date, and the docket number so the
Agency can attach them to your
comments.
Because of security procedures, the
use of regular mail may cause a
significant delay in the receipt of
comments. For information about
security procedures concerning the
delivery of materials by hand, express
delivery, messenger, or courier service,
please contact the OSHA Docket Office
at (202) 693–2350, (TTY (877) 889–
5627).
PO 00000
Frm 00060
Fmt 4703
Sfmt 4703
60503
Comments and submissions are
posted without change at https://
www.regulations.gov. Therefore, OSHA
cautions commenters about submitting
personal information such as social
security numbers and date of birth.
Although all submissions are listed in
the https://www.regulations.gov index,
some information (e.g., copyrighted
material) is not publically available to
read or download from this Web site.
All submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
Information on using the https://
www.regulations.gov Web site to submit
comments and access the docket is
available at the Web site’s ‘‘User Tips’’
link. Contact the OSHA Docket Office
for information about materials not
available from the Web site, and for
assistance in using the Internet to locate
docket submissions.
V. Authority and Signature
David Michaels, Ph.D., MPH,
Assistant Secretary of Labor for
Occupational Safety and Health,
directed the preparation of this notice.
The authority for this notice is the
Paperwork Reduction Act of 1995 (44
U.S.C. 3506 et seq.) and Secretary of
Labor’s Order No. 1–2012 (77 FR 3912).
Signed at Washington, DC, on October 1,
2014.
David Michaels,
Assistant Secretary of Labor for Occupational
Safety and Health.
[FR Doc. 2014–23898 Filed 10–6–14; 8:45 am]
BILLING CODE 4510–26–P
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2010–0047]
Bloodborne Pathogens Standard;
Extension of the Office of Management
and Budget’s (OMB) Approval of
Information Collection (Paperwork)
Requirements
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comments.
AGENCY:
OSHA solicits public
comments concerning its proposal to
extend the Office of Management and
Budget’s (OMB) approval of the
information collection requirements
specified in the Bloodborne Pathogens
Standard (29 CFR 1910.1030).
DATES: Comments must be submitted
(postmarked, sent, or received) by
December 8, 2014.
ADDRESSES:
SUMMARY:
E:\FR\FM\07OCN1.SGM
07OCN1
]]>Agencies
[Federal Register Volume 79, Number 194 (Tuesday, October 7, 2014)]
[Notices]
[Pages 60502-60503]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-23898]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2011-0189]
Servicing Multi-Piece and Single Piece Rim Wheels; Extension of
the Office of Management and Budget's (OMB) Approval of Information
Collection (Paperwork) Requirements
AGENCY: Occupational Safety and Health Administration, Labor.
ACTION: Request for public comments.
-----------------------------------------------------------------------
SUMMARY: OSHA solicits public comments concerning its proposal to
extend the Office of Management and Budget's (OMB) approval of the
information collection requirements specified in the Standard on
Servicing Multi-Piece and Single Piece Rim Wheels (29 CFR 1910.177).
The paperwork provisions of the Standard includes a requirement that
the manufacturer or a Registered Professional Engineer certify that
repaired restraining devices and barriers meet the strength
requirements specified in the Standard and a requirement that defective
wheels and wheel components be marked or tagged.
DATES: Comments must be submitted (postmarked, sent, or received) by
December 8, 2014.
ADDRESSES: Electronically: You may submit comments and attachments
electronically at https://www.regulations.gov, which is the Federal
eRulemaking Portal. Follow the instructions online for submitting
comments.
Facsimile: If your comments, including attachments, are not longer
than 10 pages you may fax them to the OSHA Docket Office at (202) 693-
1648.
Mail, hand delivery, express mail, messenger, or courier service:
When using this method, you must submit a copy of your comments and
attachments to the OSHA Docket Office, Docket No. OSHA-2011-0189,
Occupational Safety and Health Administration, U.S. Department of
Labor, Room N-2625, 200 Constitution Avenue NW., Washington, DC 20210.
Deliveries (hand, express mail, messenger, and courier services) are
accepted during the Department of Labor's and Docket Office's normal
business hours, 8:15 a.m. to 4:45 p.m., e.t.
Instructions: All submissions must include the Agency name and OSHA
docket number (OSHA-2011-0189) for the Information Collection Request
(ICR). All comments, including any personal information you provide,
are placed in the docket without change and may be made available
online at https://www.regulations.gov. For further information on
submitting comments see the ``Public Participation'' heading in the
section of this notice titled ``SUPPLEMENTARY INFORMATION.''
Docket: To read or download comments or other materials in the
docket, go to https://www.regulations.gov or the OSHA Docket Office at
the address above. All documents in the docket (including this Federal
Register notice) are listed in the https://www.regulations.gov index;
however, some information (e.g., copyrighted material) is not publicly
available to read or download from the Web site. All submissions,
including copyrighted material, are available for inspection and
copying at the OSHA Docket Office. You may also contact Theda Kenney at
the address below to obtain a copy of the ICR.
FOR FURTHER INFORMATION CONTACT: Theda Kenney or Todd Owen, Directorate
of Standards and Guidance, OSHA, U.S. Department of Labor, Room N-3609,
200 Constitution Avenue NW., Washington, DC 20210; telephone (202) 693-
2222.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of its continuing effort to reduce
paperwork and respondent (i.e., employer) burden, conducts a
preclearance consultation program to provide the public with an
opportunity to comment on proposed and continuing information
collection requirements in accord with the Paperwork Reduction Act of
1995 (PRA-95) (44 U.S.C. 3506(c)(2)(A)). This program ensures that
information is in the desired format, reporting burden (time and costs)
is minimal, collection instruments are clearly understood, and OSHA's
estimate of the information collection burden is accurate. The
Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651
et seq.) authorizes information collection by employers as necessary or
appropriate for enforcement of the OSH Act or for developing
information regarding the causes and prevention of occupational
injuries, illnesses, and
[[Page 60503]]
accidents (29 U.S.C. 657). The OSH Act also requires that OSHA obtain
such information with minimum burden upon employers, especially those
operating small businesses, and to reduce to the maximum extent
feasible unnecessary duplication of efforts in obtaining information
(29 U.S.C. 657).
Certification of repair (Sec. 1910.177(d)(3)(iv)). This paragraph
requires that when restraining devices and barriers are removed from
service because they are defective, they shall not be returned to
service until they are repaired and reinspected. If the repair is
structural, the manufacturer or a Registered Professional Engineer must
certify that the strength requirements specified in (Sec.
1910.177(d)(3)(i) of the Standard have been met.
The certification records are used to assure that equipment has
been properly repaired. The certification records also provide the most
efficient means for OSHA compliance officers to determine that an
employer is complying with the Standard.
Marking or tagging of wheel components (Sec. 1910.177(e)(2)). This
paragraph requires that defective wheels and wheel components ``be
marked or tagged unserviceable and removed from the service area.''
Under this requirement, OSHA is providing employers with sufficient
information from which they can derive the wording to use in marking
the object or constructing a tag. Therefore, this provision imposes no
paperwork burden because it falls within the portion of 5 CFR
1320(c)(2) that states, ``The public disclosure of information
originally supplied by the Federal government to the recipient for the
purpose of disclosure to the public is not included within this
definition [of `collection of information']''.
II. Special Issues for Comment
OSHA has a particular interest in comments on the following issues:
Whether the proposed information collection requirements
are necessary for the proper performance of the Agency's functions,
including whether the information is useful;
The accuracy of OSHA's estimate of the burden (time and
costs) of the information collection requirements, including the
validity of the methodology and assumptions used;
The quality, utility, and clarity of the information
collected; and
Ways to minimize the burden on employers who must comply;
for example, by using automated or other technological information
collection and transmission techniques.
III. Proposed Actions
OSHA is requesting that OMB extend its approval of the information
collection requirements contained in the Standard on Servicing Multi-
Piece and Single Piece Rim Wheels (29 CFR 1910.177). OSHA is proposing
to retain its current burden hour estimate of one (1) hour. The Agency
will summarize any comments submitted in response to this notice and
will include this summary in its request to OMB.
Type of Review: Extension of a currently approved collection.
Title: Servicing Multi-Piece and Single Piece Rim Wheels (29 CFR
1910.177).
OMB Control Number: 1218-0219.
Affected Public: Business or other for-profits.
Number of Respondents: 80.
Frequency of Responses: On occasion.
Average Time per Response: Three (3) minutes (.05 hour) to maintain
a certificate verifying proper repair of a restraining device or
barrier and to disclose the repair certificate to an OSHA Compliance
Officer.
Estimated Total Burden Hours: 1.
Estimated Cost (Operation and Maintenance): $0.
IV. Public Participation--Submission of Comments on This Notice and
Internet Access to Comments and Submissions
You may submit comments in response to this document as follows:
(1) Electronically at https://www.regulations.gov, which is the Federal
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All
comments, attachments, and other materials must identify the Agency
name and the OSHA docket number (Docket No. OSHA-2011-0189) for the
ICR. You may supplement electronic submissions by uploading document
files electronically. If you wish to mail additional materials in
reference to an electronic or facsimile submission, you must submit
them to the OSHA Docket Office (see the section of this notice titled
``ADDRESSES''). The additional materials must clearly identify your
electronic comments by your name, date, and the docket number so the
Agency can attach them to your comments.
Because of security procedures, the use of regular mail may cause a
significant delay in the receipt of comments. For information about
security procedures concerning the delivery of materials by hand,
express delivery, messenger, or courier service, please contact the
OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).
Comments and submissions are posted without change at https://www.regulations.gov. Therefore, OSHA cautions commenters about
submitting personal information such as social security numbers and
date of birth. Although all submissions are listed in the https://www.regulations.gov index, some information (e.g., copyrighted
material) is not publically available to read or download from this Web
site. All submissions, including copyrighted material, are available
for inspection and copying at the OSHA Docket Office. Information on
using the https://www.regulations.gov Web site to submit comments and
access the docket is available at the Web site's ``User Tips'' link.
Contact the OSHA Docket Office for information about materials not
available from the Web site, and for assistance in using the Internet
to locate docket submissions.
V. Authority and Signature
David Michaels, Ph.D., MPH, Assistant Secretary of Labor for
Occupational Safety and Health, directed the preparation of this
notice. The authority for this notice is the Paperwork Reduction Act of
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 1-2012
(77 FR 3912).
Signed at Washington, DC, on October 1, 2014.
David Michaels,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2014-23898 Filed 10-6-14; 8:45 am]
BILLING CODE 4510-26-P
