Curtis-Straus LLC: Application for Expansion of Recognition, 51616-51618 [2014-20561]
Download as PDF
51616
Federal Register / Vol. 79, No. 168 / Friday, August 29, 2014 / Notices
Management, Occupational Safety and
Health Administration, U.S. Department
of Labor, 200 Constitution Avenue NW.,
Room N–3655, Washington, DC 20210;
phone: (202) 693–2110 or email:
johnson.david.w@dol.gov.
SUPPLEMENTARY INFORMATION:
wreier-aviles on DSK5TPTVN1PROD with NOTICES
I. Notice of the Application for
Expansion
The Occupational Safety and Health
Administration is providing notice that
SGS North America, Inc. (SGS), is
applying for expansion of its current
recognition as an NRTL. SGS requests
the addition of four test standards to its
NRTL scope of recognition.
OSHA recognition of an NRTL
signifies that the organization meets the
requirements specified in 29 CFR
1910.7. Recognition is an
acknowledgment that the organization
can perform independent safety testing
and certification of the specific products
covered within its scope of recognition.
Each NRTL’s scope of recognition
includes (1) the type of products the
NRTL may test, with each type specified
by its applicable test standard; and (2)
the recognized site(s) that has/have the
technical capability to perform the
product-testing and productcertification activities for test standards
within the NRTL’s scope. Recognition is
not a delegation or grant of government
authority; however, recognition enables
employers to use products approved by
the NRTL to meet OSHA standards that
require product testing and certification.
The Agency processes applications by
an NRTL for initial recognition and for
an expansion or renewal of this
recognition, following requirements in
Appendix A to 29 CFR 1910.7. This
appendix requires that the Agency
publish two notices in the Federal
Register in processing an application. In
the first notice, OSHA announces the
application and provides its preliminary
finding. In the second notice, the
Agency provides its final decision on
the application. These notices set forth
the NRTL’s scope of recognition or
modifications of that scope. OSHA
maintains an informational Web page
for each NRTL, including SGS, which
details the NRTL’s scope of recognition.
These pages are available from the
OSHA Web site at https://www.osha.gov/
dts/otpca/nrtl/.
SGS currently has one facility (site)
recognized by OSHA for product testing
and certification, with its headquarters
located at: SGS North America, Inc., 620
Old Peachtree Road, Suwanee, Georgia
30024. A complete list of SGS’s scope of
recognition is available at https://
www.osha.gov/dts/otpca/nrtl/sgs.html.
VerDate Mar<15>2010
15:29 Aug 28, 2014
Jkt 232001
II. General Background on the
Application
SGS submitted an application, dated
May 28, 2014 (Exhibit 14–3—SGS
Request for Expansion), to expand its
recognition to include four additional
test standards. OSHA staff performed a
detailed analysis of the application
packet and reviewed other pertinent
information. OSHA did not perform any
on-site reviews in relation to this
application.
Table 1 below lists the appropriate
test standards found in SGS’s
application for expansion for testing and
certification of products under the
NRTL Program.
Docket Office, Room N–2625,
Occupational Safety and Health
Administration, U.S. Department of
Labor, at the above address. These
materials also are available online at
https://www.regulations.gov under
Docket No. OSHA–2006–0040.
OSHA staff will review all comments
to the docket submitted in a timely
manner and, after addressing the issues
raised by these comments, will
recommend to the Assistant Secretary
for Occupational Safety and Health
whether to grant SGS’s application for
expansion of its scope of recognition.
The Assistant Secretary will make the
final decision on granting the
application. In making this decision, the
TABLE 1—PROPOSED LIST OF APPRO- Assistant Secretary may undertake other
PRIATE TEST STANDARDS FOR IN- proceedings prescribed in Appendix A
to 29 CFR 1910.7. OSHA will publish a
CLUSION IN SGS’S NRTL SCOPE OF
public notice of its final decision in the
RECOGNITION
Federal Register.
Test standard
Test standard title
UL 982 ...........
Motor-Operated Household
Food Preparing Machines.
Electric Household Cooking
and Food Serving Appliances.
Hair Clipping and Shaving
Appliances.
Personal Hygiene and
Health Care Appliances.
UL 1026 .........
UL 1028 .........
UL 1431 .........
III. Preliminary Findings on the
Application
SGS submitted an acceptable
application for expansion of its scope of
recognition. OSHA’s review of the
application file, and pertinent
information, indicate that SGS can meet
the requirements prescribed by 29 CFR
1910.7 for expanding its recognition to
include the addition of these four test
standards for NRTL testing and
certification listed above. This
preliminary finding does not constitute
an interim or temporary approval of
SGS’s application.
OSHA welcomes public comment as
to whether SGS meets the requirements
of 29 CFR 1910.7 for expansion of its
recognition as an NRTL. Comments
should consist of pertinent written
documents and exhibits. Commenters
needing more time to comment must
submit a request in writing, stating the
reasons for the request. Commenters
must submit the written request for an
extension by the due date for comments.
OSHA will limit any extension to 10
days unless the requester justifies a
longer period. OSHA may deny a
request for an extension if the request is
not adequately justified. To obtain or
review copies of the exhibits identified
in this notice, as well as comments
submitted to the docket, contact the
PO 00000
Frm 00091
Fmt 4703
Sfmt 4703
IV. Authority and Signature
David Michaels, Ph.D., MPH,
Assistant Secretary of Labor for
Occupational Safety and Health, 200
Constitution Avenue NW., Washington,
DC 20210, authorized the preparation of
this notice. Accordingly, the Agency is
issuing this notice pursuant to 29 U.S.C.
657(g)(2), Secretary of Labor’s Order No.
1–2012 (77 FR 3912, Jan. 25, 2012), and
29 CFR 1910.7.
Signed at Washington, DC, on August 25,
2014.
David Michaels,
Assistant Secretary of Labor for Occupational
Safety and Health.
[FR Doc. 2014–20593 Filed 8–28–14; 8:45 am]
BILLING CODE 4510–26–P
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2009–0026]
Curtis-Straus LLC: Application for
Expansion of Recognition
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Notice.
AGENCY:
In this notice, OSHA
announces the application of CurtisStraus LLC for expansion of its
recognition as a Nationally Recognized
Testing Laboratory (NRTL) and presents
the Agency’s preliminary finding to
grant the application.
DATES: Submit comments, information,
and documents in response to this
notice, or requests for an extension of
time to make a submission, on or before
September 15, 2014.
SUMMARY:
E:\FR\FM\29AUN1.SGM
29AUN1
Federal Register / Vol. 79, No. 168 / Friday, August 29, 2014 / Notices
Submit comments by any of
the following methods:
1. Electronically: Submit comments
and attachments electronically at
https://www.regulations.gov, which is
the Federal eRulemaking Portal. Follow
the instructions online for making
electronic submissions.
2. Facsimile: If submissions,
including attachments, are not longer
than 10 pages, commenters may fax
them to the OSHA Docket Office at (202)
693–1648.
3. Regular or express mail, hand
delivery, or messenger (courier) service:
Submit comments, requests, and any
attachments to the OSHA Docket Office,
Docket No. OSHA–2009–0026,
Technical Data Center, U.S. Department
of Labor, 200 Constitution Avenue NW.,
Room N–2625, Washington, DC 20210;
telephone: (202) 693–2350 (TTY
number: (877) 889–5627). Note that
security procedures may result in
significant delays in receiving
comments and other written materials
by regular mail. Contact the OSHA
Docket Office for information about
security procedures concerning delivery
of materials by express mail, hand
delivery, or messenger service. The
hours of operation for the OSHA Docket
Office are 8:15 a.m.—4:45 p.m., e.t.
4. Instructions: All submissions must
include the Agency name and the OSHA
docket number (OSHA–2009–0026).
OSHA places comments and other
materials, including any personal
information, in the public docket
without revision, and these materials
will be available online at https://
www.regulations.gov. Therefore, the
Agency cautions commenters about
submitting statements they do not want
made available to the public, or
submitting comments that contain
personal information (either about
themselves or others) such as Social
Security numbers, birth dates, and
medical data.
5. Docket: To read or download
submissions or other material in the
docket, go to https://www.regulations.gov
or the OSHA Docket Office at the
address above. All documents in the
docket are listed in the https://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download through the Web site.
All submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
Contact the OSHA Docket Office for
assistance in locating docket
submissions.
6. Extension of comment period:
Submit requests for an extension of the
comment period on or before September
wreier-aviles on DSK5TPTVN1PROD with NOTICES
ADDRESSES:
VerDate Mar<15>2010
15:29 Aug 28, 2014
Jkt 232001
15, 2014 to the Office of Technical
Programs and Coordination Activities,
Directorate of Technical Support and
Emergency Management, Occupational
Safety and Health Administration, U.S.
Department of Labor, 200 Constitution
Avenue NW., Room N–3655,
Washington, DC 20210, or by fax to
(202) 693–1644.
FOR FURTHER INFORMATION CONTACT:
Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank
Meilinger, Director, OSHA Office of
Communications, U.S. Department of
Labor, 200 Constitution Avenue NW.,
Room N–3647, Washington, DC 20210;
telephone: (202) 693–1999; email:
Meilinger.francis2@dol.gov.
General and technical information:
Contact Mr. David W. Johnson, Director,
Office of Technical Programs and
Coordination Activities, Directorate of
Technical Support and Emergency
Management, Occupational Safety and
Health Administration, U.S. Department
of Labor, 200 Constitution Avenue NW.,
Room N–3655, Washington, DC 20210;
phone: (202) 693–2110 or email:
johnson.david.w@dol.gov.
SUPPLEMENTARY INFORMATION:
I. Notice of the Application for
Expansion
The Occupational Safety and Health
Administration is providing notice that
Curtis-Straus LLC (CSL) is applying for
expansion of its current recognition as
an NRTL. CSL requests the addition of
one test standard to its NRTL scope of
recognition.
OSHA recognition of an NRTL
signifies that the organization meets the
requirements specified in 29 CFR
1910.7. Recognition is an
acknowledgment that the organization
can perform independent safety testing
and certification of the specific products
covered within its scope of recognition.
Each NRTL’s scope of recognition
includes (1) the type of products the
NRTL may test, with each type specified
by its applicable test standard; and (2)
the recognized site(s) that has/have the
technical capability to perform the
product-testing and productcertification activities for test standards
within the NRTL’s scope. Recognition is
not a delegation or grant of government
authority; however, recognition enables
employers to use products approved by
the NRTL to meet OSHA standards that
require product testing and certification.
The Agency processes applications by
an NRTL for initial recognition and for
an expansion or renewal of this
recognition, following requirements in
Appendix A to 29 CFR 1910.7. This
PO 00000
Frm 00092
Fmt 4703
Sfmt 4703
51617
appendix requires that the Agency
publish two notices in the Federal
Register in processing an application. In
the first notice, OSHA announces the
application and provides its preliminary
finding. In the second notice, the
Agency provides its final decision on
the application. These notices set forth
the NRTL’s scope of recognition or
modifications of that scope. OSHA
maintains an informational Web page
for each NRTL, including CSL, which
details the NRTL’s scope of recognition.
These pages are available from the
OSHA Web site at https://www.osha.gov/
dts/otpca/nrtl/.
CSL currently has one facility (site)
recognized by OSHA for product testing
and certification, with its headquarters
located at: Curtis-Straus LLC, One
Distribution Center Circle, Suite #1,
Littleton, Massachusetts 01460. A
complete list of CSL’s scope of
recognition is available at https://
www.osha.gov/dts/otpca/nrtl/csl.html.
II. General Background on the
Application
CSL submitted an application, dated
February 13, 2014 (Exhibit 14–1—CSL
Expansion Application for AAMI ES
60601–1), to expand its recognition to
include one additional test standard.
OSHA staff performed a comparability
analysis and reviewed other pertinent
information. OSHA did not perform any
on-site reviews in relation to this
application.
Table 1 below lists the appropriate
test standard found in CSL’s application
for expansion for testing and
certification of products under the
NRTL Program.
TABLE 1—PROPOSED APPROPRIATE
TEST STANDARD FOR INCLUSION IN
CSL’S NRTL SCOPE OF RECOGNITION
Test standard
AAMI ES60601–1
Test standard title
Medical electrical equipment-Part 1: General
requirements for basic
safety and essential
performance
III. Preliminary Findings on the
Application
CSL submitted an acceptable
application for expansion of its scope of
recognition. OSHA’s review of the
application file, and the comparability
analysis, indicate that CSL can meet the
requirements prescribed by 29 CFR
1910.7 for expanding its recognition to
include the addition of this one test
standard for NRTL testing and
certification listed above. This
E:\FR\FM\29AUN1.SGM
29AUN1
51618
Federal Register / Vol. 79, No. 168 / Friday, August 29, 2014 / Notices
preliminary finding does not constitute
an interim or temporary approval of
CSL’s application.
OSHA welcomes public comment as
to whether CSL meets the requirements
of 29 CFR 1910.7 for expansion of its
recognition as an NRTL. Comments
should consist of pertinent written
documents and exhibits. Commenters
needing more time to comment must
submit a request in writing, stating the
reasons for the request. Commenters
must submit the written request for an
extension by the due date for comments.
OSHA will limit any extension to 10
days unless the requester justifies a
longer period. OSHA may deny a
request for an extension if the request is
not adequately justified. To obtain or
review copies of the exhibits identified
in this notice, as well as comments
submitted to the docket, contact the
Docket Office, Room N–2625,
Occupational Safety and Health
Administration, U.S. Department of
Labor, at the above address. These
materials also are available online at
https://www.regulations.gov under
Docket No. OSHA–2009–0026.
OSHA staff will review all comments
to the docket submitted in a timely
manner and, after addressing the issues
raised by these comments, will
recommend to the Assistant Secretary
for Occupational Safety and Health
whether to grant CSL’s application for
expansion of its scope of recognition.
The Assistant Secretary will make the
final decision on granting the
application. In making this decision, the
Assistant Secretary may undertake other
proceedings prescribed in Appendix A
to 29 CFR 1910.7. OSHA will publish a
public notice of its final decision in the
Federal Register.
wreier-aviles on DSK5TPTVN1PROD with NOTICES
IV. Authority and Signature
David Michaels, Ph.D., MPH,
Assistant Secretary of Labor for
Occupational Safety and Health, 200
Constitution Avenue NW., Washington,
DC 20210, authorized the preparation of
this notice. Accordingly, the Agency is
issuing this notice pursuant to 29 U.S.C.
657(g)(2), Secretary of Labor’s Order No.
1–2012 (77 FR 3912, Jan. 25, 2012), and
29 CFR 1910.7.
Signed at Washington, DC, on August 25,
2014.
David Michaels,
Assistant Secretary of Labor for Occupational
Safety and Health.
[FR Doc. 2014–20561 Filed 8–28–14; 8:45 am]
BILLING CODE 4510–26–P
VerDate Mar<15>2010
15:29 Aug 28, 2014
Jkt 232001
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2013–0030]
IAPMO EGS: Application for
Recognition
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Notice.
AGENCY:
In this notice, OSHA
announces the application of the
International Association of Plumbing
and Mechanical Officials EGS (IAPMO),
for recognition as a Nationally
Recognized Testing Laboratory (NRTL),
and presents the Agency’s preliminary
finding to grant this recognition.
DATES: Submit comments, information,
and documents in response to this
notice, or requests for an extension of
time to make a submission, on or before
September 29, 2014.
ADDRESSES: Submit comments by any of
the following methods:
1. Electronically: Submit comments
and attachments electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for making
electronic submissions.
2. Facsimile: If submissions,
including attachments, are not longer
than 10 pages, commenters may fax
them to the OSHA Docket Office at (202)
693–1648.
3. Regular or express mail, hand
delivery, or messenger (courier) service:
Submit comments, requests, and any
attachments to the OSHA Docket Office,
Docket No. OSHA–2013–0030,
Technical Data Center, U.S. Department
of Labor, 200 Constitution Avenue NW.,
Room N–2625, Washington, DC 20210;
telephone: (202) 693–2350 (TTY
number: (877) 889–5627). Note that
security procedures may result in
significant delays in receiving
comments and other written materials
by regular mail. Contact the OSHA
Docket Office for information about
security procedures concerning delivery
of materials by express mail, hand
delivery, or messenger service. The
hours of operation for the OSHA Docket
Office are 8:15 a.m.–4:45 p.m., e.t.
4. Instructions: All submissions must
include the Agency name and the OSHA
docket number (OSHA–2013–0030).
OSHA places comments and other
materials, including any personal
information, in the public docket
without revision, and these materials
will be available online at https://
www.regulations.gov. Therefore, the
SUMMARY:
PO 00000
Frm 00093
Fmt 4703
Sfmt 4703
Agency cautions commenters about
submitting statements they do not want
made available to the public, or
submitting comments that contain
personal information (either about
themselves or others) such as Social
Security numbers, birth dates, and
medical data.
5. Docket: To read or download
submissions or other material in the
docket, go to https://www.regulations.gov
or the OSHA Docket Office at the
address above. All documents in the
docket are listed in the https://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download through the Web site.
All submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
Contact the OSHA Docket Office for
assistance in locating docket
submissions.
6. Extension of comment period:
Submit requests for an extension of the
comment period on or before September
29, 2014 to the Office of Technical
Programs and Coordination Activities,
Directorate of Technical Support and
Emergency Management, Occupational
Safety and Health Administration, U.S.
Department of Labor, 200 Constitution
Avenue NW., Room N–3655,
Washington, DC 20210, or by fax to
(202) 693–1644.
FOR FURTHER INFORMATION CONTACT:
Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank
Meilinger, Director, OSHA Office of
Communications, U.S. Department of
Labor, 200 Constitution Avenue NW.,
Room N–3647, Washington, DC 20210;
telephone: (202) 693–1999; email:
Meilinger.francis2@dol.gov.
General and technical information:
Contact Mr. David W. Johnson, Director,
Office of Technical Programs and
Coordination Activities, Directorate of
Technical Support and Emergency
Management, Occupational Safety and
Health Administration, U.S. Department
of Labor, 200 Constitution Avenue NW.,
Room N–3655, Washington, DC 20210;
phone: (202) 693–2110 or email:
johnson.david.w@dol.gov.
SUPPLEMENTARY INFORMATION:
I. Background
Many of OSHA’s workplace standards
require that an NRTL test and certify
certain types of equipment as safe for
use in the workplace. NRTLs are
independent laboratories that meet
OSHA’s requirements for performing
safety testing and certification of
products used in the workplace. To
E:\FR\FM\29AUN1.SGM
29AUN1
Agencies
[Federal Register Volume 79, Number 168 (Friday, August 29, 2014)]
[Notices]
[Pages 51616-51618]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-20561]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2009-0026]
Curtis-Straus LLC: Application for Expansion of Recognition
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: In this notice, OSHA announces the application of Curtis-
Straus LLC for expansion of its recognition as a Nationally Recognized
Testing Laboratory (NRTL) and presents the Agency's preliminary finding
to grant the application.
DATES: Submit comments, information, and documents in response to this
notice, or requests for an extension of time to make a submission, on
or before September 15, 2014.
[[Page 51617]]
ADDRESSES: Submit comments by any of the following methods:
1. Electronically: Submit comments and attachments electronically
at https://www.regulations.gov, which is the Federal eRulemaking Portal.
Follow the instructions online for making electronic submissions.
2. Facsimile: If submissions, including attachments, are not longer
than 10 pages, commenters may fax them to the OSHA Docket Office at
(202) 693-1648.
3. Regular or express mail, hand delivery, or messenger (courier)
service: Submit comments, requests, and any attachments to the OSHA
Docket Office, Docket No. OSHA-2009-0026, Technical Data Center, U.S.
Department of Labor, 200 Constitution Avenue NW., Room N-2625,
Washington, DC 20210; telephone: (202) 693-2350 (TTY number: (877) 889-
5627). Note that security procedures may result in significant delays
in receiving comments and other written materials by regular mail.
Contact the OSHA Docket Office for information about security
procedures concerning delivery of materials by express mail, hand
delivery, or messenger service. The hours of operation for the OSHA
Docket Office are 8:15 a.m.--4:45 p.m., e.t.
4. Instructions: All submissions must include the Agency name and
the OSHA docket number (OSHA-2009-0026). OSHA places comments and other
materials, including any personal information, in the public docket
without revision, and these materials will be available online at
https://www.regulations.gov. Therefore, the Agency cautions commenters
about submitting statements they do not want made available to the
public, or submitting comments that contain personal information
(either about themselves or others) such as Social Security numbers,
birth dates, and medical data.
5. Docket: To read or download submissions or other material in the
docket, go to https://www.regulations.gov or the OSHA Docket Office at
the address above. All documents in the docket are listed in the https://www.regulations.gov index; however, some information (e.g.,
copyrighted material) is not publicly available to read or download
through the Web site. All submissions, including copyrighted material,
are available for inspection and copying at the OSHA Docket Office.
Contact the OSHA Docket Office for assistance in locating docket
submissions.
6. Extension of comment period: Submit requests for an extension of
the comment period on or before September 15, 2014 to the Office of
Technical Programs and Coordination Activities, Directorate of
Technical Support and Emergency Management, Occupational Safety and
Health Administration, U.S. Department of Labor, 200 Constitution
Avenue NW., Room N-3655, Washington, DC 20210, or by fax to (202) 693-
1644.
FOR FURTHER INFORMATION CONTACT: Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office
of Communications, U.S. Department of Labor, 200 Constitution Avenue
NW., Room N-3647, Washington, DC 20210; telephone: (202) 693-1999;
email: Meilinger.francis2@dol.gov.
General and technical information: Contact Mr. David W. Johnson,
Director, Office of Technical Programs and Coordination Activities,
Directorate of Technical Support and Emergency Management, Occupational
Safety and Health Administration, U.S. Department of Labor, 200
Constitution Avenue NW., Room N-3655, Washington, DC 20210; phone:
(202) 693-2110 or email: johnson.david.w@dol.gov.
SUPPLEMENTARY INFORMATION:
I. Notice of the Application for Expansion
The Occupational Safety and Health Administration is providing
notice that Curtis-Straus LLC (CSL) is applying for expansion of its
current recognition as an NRTL. CSL requests the addition of one test
standard to its NRTL scope of recognition.
OSHA recognition of an NRTL signifies that the organization meets
the requirements specified in 29 CFR 1910.7. Recognition is an
acknowledgment that the organization can perform independent safety
testing and certification of the specific products covered within its
scope of recognition. Each NRTL's scope of recognition includes (1) the
type of products the NRTL may test, with each type specified by its
applicable test standard; and (2) the recognized site(s) that has/have
the technical capability to perform the product-testing and product-
certification activities for test standards within the NRTL's scope.
Recognition is not a delegation or grant of government authority;
however, recognition enables employers to use products approved by the
NRTL to meet OSHA standards that require product testing and
certification.
The Agency processes applications by an NRTL for initial
recognition and for an expansion or renewal of this recognition,
following requirements in Appendix A to 29 CFR 1910.7. This appendix
requires that the Agency publish two notices in the Federal Register in
processing an application. In the first notice, OSHA announces the
application and provides its preliminary finding. In the second notice,
the Agency provides its final decision on the application. These
notices set forth the NRTL's scope of recognition or modifications of
that scope. OSHA maintains an informational Web page for each NRTL,
including CSL, which details the NRTL's scope of recognition. These
pages are available from the OSHA Web site at https://www.osha.gov/dts/otpca/nrtl/.
CSL currently has one facility (site) recognized by OSHA for
product testing and certification, with its headquarters located at:
Curtis-Straus LLC, One Distribution Center Circle, Suite 1,
Littleton, Massachusetts 01460. A complete list of CSL's scope of
recognition is available at https://www.osha.gov/dts/otpca/nrtl/csl.html.
II. General Background on the Application
CSL submitted an application, dated February 13, 2014 (Exhibit 14-
1--CSL Expansion Application for AAMI ES 60601-1), to expand its
recognition to include one additional test standard. OSHA staff
performed a comparability analysis and reviewed other pertinent
information. OSHA did not perform any on-site reviews in relation to
this application.
Table 1 below lists the appropriate test standard found in CSL's
application for expansion for testing and certification of products
under the NRTL Program.
Table 1--Proposed Appropriate Test Standard for Inclusion in CSL's NRTL
Scope of Recognition
------------------------------------------------------------------------
Test standard Test standard title
------------------------------------------------------------------------
AAMI ES60601-1........................ Medical electrical equipment-
Part 1: General requirements
for basic safety and essential
performance
------------------------------------------------------------------------
III. Preliminary Findings on the Application
CSL submitted an acceptable application for expansion of its scope
of recognition. OSHA's review of the application file, and the
comparability analysis, indicate that CSL can meet the requirements
prescribed by 29 CFR 1910.7 for expanding its recognition to include
the addition of this one test standard for NRTL testing and
certification listed above. This
[[Page 51618]]
preliminary finding does not constitute an interim or temporary
approval of CSL's application.
OSHA welcomes public comment as to whether CSL meets the
requirements of 29 CFR 1910.7 for expansion of its recognition as an
NRTL. Comments should consist of pertinent written documents and
exhibits. Commenters needing more time to comment must submit a request
in writing, stating the reasons for the request. Commenters must submit
the written request for an extension by the due date for comments. OSHA
will limit any extension to 10 days unless the requester justifies a
longer period. OSHA may deny a request for an extension if the request
is not adequately justified. To obtain or review copies of the exhibits
identified in this notice, as well as comments submitted to the docket,
contact the Docket Office, Room N-2625, Occupational Safety and Health
Administration, U.S. Department of Labor, at the above address. These
materials also are available online at https://www.regulations.gov under
Docket No. OSHA-2009-0026.
OSHA staff will review all comments to the docket submitted in a
timely manner and, after addressing the issues raised by these
comments, will recommend to the Assistant Secretary for Occupational
Safety and Health whether to grant CSL's application for expansion of
its scope of recognition. The Assistant Secretary will make the final
decision on granting the application. In making this decision, the
Assistant Secretary may undertake other proceedings prescribed in
Appendix A to 29 CFR 1910.7. OSHA will publish a public notice of its
final decision in the Federal Register.
IV. Authority and Signature
David Michaels, Ph.D., MPH, Assistant Secretary of Labor for
Occupational Safety and Health, 200 Constitution Avenue NW.,
Washington, DC 20210, authorized the preparation of this notice.
Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C.
657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25,
2012), and 29 CFR 1910.7.
Signed at Washington, DC, on August 25, 2014.
David Michaels,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2014-20561 Filed 8-28-14; 8:45 am]
BILLING CODE 4510-26-P