Light-Walled Rectangular Pipe and Tube From Mexico, Turkey, the People's Republic of China, and the Republic of Korea: Continuation of Antidumping and Countervailing Duty Orders, 35522-35523 [2014-14604]
Download as PDF
35522
Federal Register / Vol. 79, No. 120 / Monday, June 23, 2014 / Notices
Pursuant to the Federal
Advisory Committee Act, this
constitutes notice of the upcoming
meeting of the Grain Inspection, Packers
and Stockyards Administration (GIPSA)
Grain Inspection Advisory Committee
(Advisory Committee). The Advisory
Committee meets annually to advise the
GIPSA Administrator on the programs
and services that GIPSA delivers under
the U.S. Grain Standards Act.
Recommendations by the Advisory
Committee help GIPSA better meet the
needs of its customers who operate in a
dynamic and changing marketplace.
DATES: July 15, 2014, 8:00 a.m. to 4:30
p.m.; and July 16, 2014, 8:00 a.m. to
Noon.
SUMMARY:
The Advisory Committee
meeting will take place at GIPSA’s
National Grain Center, 10383 N.
Ambassador Drive, Kansas City,
Missouri 64153.
Requests to orally address the
Advisory Committee during the meeting
or written comments may be sent to:
Administrator, GIPSA, U.S. Department
of Agriculture, 1400 Independence
Avenue SW., STOP 3601, Washington,
DC 20250–3601. Requests and
comments may also be faxed to (202)
690–2173.
FOR FURTHER INFORMATION CONTACT:
Terri L. Henry by phone at (202) 205–
8281 or by email at Terri.L.Henry@
usda.gov.
ADDRESSES:
The
purpose of the Advisory Committee is to
provide advice to the GIPSA
Administrator with respect to the
implementation of the U.S. Grain
Standards Act (7 U.S.C. 71–87k).
Information about the Advisory
Committee is available on the GIPSA
Web site at https://www.gipsa.usda.gov/
fgis/adcommit.html.
The agenda will include an overview
of international activities, quality
control initiatives, moisture meters,
market overview, optical scanning for
rice brokens, Field Management
Division updates and initiatives,
standards and market needs, and
inspector performance.
For a copy of the agenda please
contact Terri L. Henry by phone at (202)
205–8281 or by email at Terri.L.Henry@
usda.gov.
Public participation will be limited to
written statements unless permission is
received from the Committee
Chairperson to orally address the
Advisory Committee. The meeting will
be open to the public.
Persons with disabilities who require
alternative means of communication of
program information or related
emcdonald on DSK67QTVN1PROD with NOTICES
SUPPLEMENTARY INFORMATION:
VerDate Mar<15>2010
17:33 Jun 20, 2014
Jkt 232001
accommodations should contact Terri L.
Henry at the telephone number listed
above.
Background
On April 2, 2013, the Department of
Commerce (the Department) initiated
the first five-year (‘‘sunset’’) reviews of
Susan B. Keith,
the AD orders on light-walled pipe and
Acting Administrator, Grain Inspection,
tube from Mexico, Turkey, the PRC, and
Packers and Stockyards Administration.
Korea 1 (collectively, the AD Orders) and
[FR Doc. 2014–14613 Filed 6–20–14; 8:45 am]
the first sunset review of the
BILLING CODE 3410–KD–P
countervailing duty order on lightwalled pipe and tube from the PRC 2
(CVD Order) pursuant to sections 751(c)
and 752 of the Tariff Act of 1930, as
DEPARTMENT OF COMMERCE
amended (the Act).3 As a result of these
sunset reviews, the Department found
International Trade Administration
that revocation of the AD Orders would
[A–201–836, A–489–815, A–570–914, A–580– likely lead to continuation or recurrence
of dumping and that revocation of the
859, C–570–915]
CVD Order would likely lead to
continuation or recurrence of
Light-Walled Rectangular Pipe and
countervailable subsidies and, therefore,
Tube From Mexico, Turkey, the
notified the ITC of the magnitude of the
People’s Republic of China, and the
margins of dumping and the subsidy
Republic of Korea: Continuation of
rates likely to prevail should the AD
Antidumping and Countervailing Duty
Orders and the CVD Order be revoked.4
Orders
On June 13, 2014, the ITC published
AGENCY: Enforcement and Compliance,
its determination, pursuant to sections
International Trade Administration,
751(c)(1) and 752(a) of the Act, that
Department of Commerce.
revocation of the AD Orders and the
SUMMARY: The Department of Commerce CVD Order would likely lead to
continuation or recurrence of material
(the Department) has determined that
injury within a reasonably foreseeable
revocation of the antidumping (AD)
time.5
orders on light-walled rectangular pipe
and tube (light-walled pipe and tube)
Scope of the Orders
from Mexico, Turkey, the People’s
The merchandise subject to the orders
Republic of China (PRC), and the
is certain welded carbon quality lightRepublic of Korea (Korea) would likely
walled steel pipe and tube, of
lead to continuation or recurrence of
rectangular (including square) cross
dumping, and that revocation of the
section, having a wall thickness of less
countervailing duty (CVD) order on
than 4 mm. The term carbon-quality
light-walled pipe and tube from the PRC
steel includes both carbon steel and
would likely lead to continuation or
recurrence of a countervailable subsidy.
1 See Light-Walled Rectangular Pipe and Tube
The U.S. International Trade
from Mexico, the People’s Republic of China, and
Commission (the ITC) has also
the Republic of Korea: Antidumping Duty Orders;
Light-Walled Rectangular Pipe and Tube from the
determined that revocation of these AD
Republic of Korea: Notice of Amended Final
and CVD orders would likely lead to a
Determination of Sales at Less Than Fair Value, 73
continuation or recurrence of material
FR 45403, 45405 (August 5, 2008); Notice of
injury to an industry in the United
Antidumping Duty Order: Light-Walled Rectangular
Pipe and Tube From Turkey, 73 FR 31065 (May 30,
States. Accordingly, the Department is
2008).
publishing this notice of the
2 See Light-Walled Rectangular Pipe and Tube
continuation of these AD and CVD
from the People’s Republic of China: Notice of
orders.
Countervailing Duty Order, 73 FR 45405 (August 5,
DATES:
Effective Date: June 23, 2014.
FOR FURTHER INFORMATION CONTACT:
Dena Crossland or Angelica Mendoza,
AD/CVD Operations Office VI (AD), or
Jennifer Meek or Nancy Decker, AD/
CVD Operations Office I (CVD),
Enforcement and Compliance,
International Trade Administration,
U.S. Department of Commerce, 14th
Street and Constitution Avenue NW.,
Washington, DC 20230; telephone: (202)
482–3362 or (202) 482–3019,
respectively.
SUPPLEMENTARY INFORMATION:
PO 00000
Frm 00011
Fmt 4703
Sfmt 4703
2008).
3 See Initiation of Five-Year (‘‘Sunset’’) Review, 78
FR 19647 (April 2, 2013).
4 See Final Results of Expedited Sunset Reviews
of Antidumping Duty Orders: Light-Walled
Rectangular Pipe and Tube From Mexico, Turkey,
the People’s Republic of China, and the Republic
of Korea, 78 FR 47671 (August 6, 2013) and LightWalled Rectangular Pipe and Tube From the
People’s Republic of China: Final Results of the
Expedited First Sunset Review of the Countervailing
Duty Order, 78 FR 48416 (August 8, 2013).
5 See Light-Walled Rectangular Pipe from China,
Korea, Mexico and Turkey; Determinations, 79 FR
33950 (June 13, 2014); see also ITC Publication
4470 (June 2014) entitled Light-Walled Rectangular
Pipe and Tube from China, Korea, Mexico, and
Turkey (Inv. Nos. 701–TA–449 and 731–TA–1118–
1121 (Review)).
E:\FR\FM\23JNN1.SGM
23JNN1
Federal Register / Vol. 79, No. 120 / Monday, June 23, 2014 / Notices
alloy steel which contains only small
amounts of alloying elements.
Specifically, the term carbon-quality
includes products in which none of the
elements listed below exceeds the
quantity by weight respectively
indicated: 1.80 percent of manganese, or
2.25 percent of silicon, or 1.00 percent
of copper, or 0.50 percent of aluminum,
or 1.25 percent of chromium, or 0.30
percent of cobalt, or 0.40 percent of
lead, or 1.25 percent of nickel, or 0.30
percent of tungsten, or 0.10 percent of
molybdenum, or 0.10 percent of
niobium, or 0.15 percent vanadium, or
0.15 percent of zirconium. The
description of carbon-quality is
intended to identify carbon-quality
products within the scope. The welded
carbon-quality rectangular pipe and
tube subject to the Orders is currently
classified under the Harmonized Tariff
Schedule of the United States (HTSUS)
subheadings 7306.61.50.00 and
7306.61.70.60. While HTSUS
subheadings are provided for
convenience and customs purposes, the
written description of the scope of the
orders is dispositive.
emcdonald on DSK67QTVN1PROD with NOTICES
Continuation of the Orders
As a result of the determinations by
the Department and the ITC that
revocation of the AD Orders and the
CVD Order would likely lead to
continuation or recurrence of dumping
and a countervailable subsidy, and
material injury to an industry in the
United States, pursuant to sections
751(c) and 751(d)(2) of the Act, the
Department hereby orders the
continuation of the AD Orders and the
CVD Order.
U.S. Customs and Border Protection
will continue to collect cash deposits at
the rates in effect at the time of entry for
all imports of subject merchandise. The
effective date of the continuation of the
AD Orders and the CVD Order is the
date of publication in the Federal
Register of this notice of continuation.
Pursuant to section 751(c)(2) of the Act,
the Department intends to initiate the
next sunset reviews of these orders not
later than 30 days prior to the fifth
anniversary of the effective date of this
continuation.
These sunset reviews and this notice
are in accordance with section 751(c) of
the Act and published pursuant to
section 777(i)(1) of the Act.
Dated: June 13, 2014.
Lynn Fischer Fox,
Deputy Assistant Secretary for Policy and
Negotiations.
[FR Doc. 2014–14604 Filed 6–20–14; 8:45 am]
BILLING CODE 3510–DS–P
VerDate Mar<15>2010
17:33 Jun 20, 2014
Jkt 232001
DEPARTMENT OF COMMERCE
International Trade Administration
[A–570–929]
Small Diameter Graphite Electrodes
From the People’s Republic of China:
Continuation of Antidumping Duty
Order
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce
(the Department) and the International
Trade Commission (the ITC) have
determined that revocation of the
antidumping duty (AD) order on small
diameter graphite electrodes from the
People’s Republic of China (PRC) would
likely lead to continuation or recurrence
of dumping and material injury to an
industry in the United States. Therefore,
the Department is publishing a notice of
continuation of this AD order.
DATES: Effective Date: June 23, 2014.
FOR FURTHER INFORMATION CONTACT:
Michael Romani or Minoo Hatten, AD/
CVD Operations, Office I, Enforcement
and Compliance, International Trade
Administration, U.S. Department of
Commerce, 14th Street and Constitution
Avenue NW., Washington, DC 20230;
telephone: (202) 482–0198 or (202) 482–
1690, respectively.
SUPPLEMENTARY INFORMATION:
AGENCY:
Background
On January 2, 2014, the Department
published the initiation of the first
sunset review of the AD order on small
diameter graphite electrodes from the
PRC pursuant to section 751(c) of the
Tariff Act of 1930, as amended (the Act)
and 19 CFR 351.218(c).1 As a result of
its review, the Department determined
that revocation of the AD order on small
diameter graphite electrodes from the
PRC would likely lead to continuation
or recurrence of dumping, and notified
the ITC of the magnitude of the margins
likely to prevail should the order be
revoked.2 On June 6, 2014, pursuant to
section 75l(c) of the Act, the ITC
determined that revocation of the AD
order on small diameter graphite
electrodes from the PRC would likely
lead to continuation or recurrence of
material injury to an industry in the
United States within a reasonably
foreseeable time.3
1 See Initiation of Five-Year (‘‘Sunset’’) Review, 79
FR 110 (January 2, 2014).
2 See Small Diameter Graphite Electrodes From
the People’s Republic of China: Final Results of the
Expedited Sunset Review of the Antidumping Duty
Order, 79 FR 26208 (May 7, 2014).
3 See Small Diameter Graphite Electrodes From
China, 79 FR 32750 (June 6, 2014).
PO 00000
Frm 00012
Fmt 4703
Sfmt 4703
35523
Scope of the Order
The merchandise covered by the order
includes all small diameter graphite
electrodes of any length, whether or not
finished, of a kind used in furnaces,
with a nominal or actual diameter of
400 millimeters (16 inches) or less, and
whether or not attached to a graphite
pin joining system or any other type of
joining system or hardware. The
merchandise covered by the order also
includes graphite pin joining systems
for small diameter graphite electrodes,
of any length, whether or not finished,
of a kind used in furnaces, and whether
or not the graphite pin joining system is
attached to, sold with, or sold separately
from, the small diameter graphite
electrodes. Small diameter graphite
electrodes and graphite pin joining
systems for small diameter graphite
electrodes are most commonly used in
primary melting, ladle metallurgy, and
specialty furnace applications in
industries including foundries, smelters,
and steel refining operations. Small
diameter graphite electrodes and
graphite pin joining systems for small
diameter graphite electrodes that are
subject to the order are currently
classified under the HTSUS
subheadings 8545.11.0010,4 3801.10,5
and 8545.11.0020.6 The HTSUS
numbers are provided for convenience
and customs purposes, but the written
description of the scope is dispositive.
Continuation of the Order
As a result of the determinations by
the Department and the ITC that
revocation of the AD order would likely
lead to continuation or recurrence of
dumping and material injury to an
industry in the United States, pursuant
to section 75l(d)(2) of the Act and 19
4 The scope described in the order refers to the
HTSUS subheading 8545.11.0000. We note that,
starting in 2010, imports of small diameter graphite
electrodes are classified in the HTSUS under
subheading 8545.11.0010 and imports of large
diameter graphite electrodes are classified under
subheading 8545.11.0020.
5 See Small Diameter Graphite Electrodes From
the People’s Republic of China: Affirmative Final
Determination of Circumvention of the
Antidumping Duty Order, 77 FR 47596 (August 9,
2012) and accompanying Issues and Decision
Memorandum at Comment 6 (the scope of the order
is amended to include imports classifiable under
HTSUS 3801.10, i.e., un-finished small diameter
graphite electrodes).
6 See Small Diameter Graphite Electrodes From
the People’s Republic of China: Affirmative Final
Determination of Circumvention of the
Antidumping Duty Order and Rescission of LaterDeveloped Merchandise Anticircumvention Inquiry,
78 FR 56864 (September 16, 2013) and
accompanying Issues and Decision Memorandum at
Comments 1 and 2 (the scope of the order is
amended to include large diameter graphite
electrodes, specifically those of 17 inches produced
by Jilin Carbon classifiable under HTSUS
8545.11.0020).
E:\FR\FM\23JNN1.SGM
23JNN1
Agencies
[Federal Register Volume 79, Number 120 (Monday, June 23, 2014)]
[Notices]
[Pages 35522-35523]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-14604]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
[A-201-836, A-489-815, A-570-914, A-580-859, C-570-915]
Light-Walled Rectangular Pipe and Tube From Mexico, Turkey, the
People's Republic of China, and the Republic of Korea: Continuation of
Antidumping and Countervailing Duty Orders
AGENCY: Enforcement and Compliance, International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce (the Department) has determined
that revocation of the antidumping (AD) orders on light-walled
rectangular pipe and tube (light-walled pipe and tube) from Mexico,
Turkey, the People's Republic of China (PRC), and the Republic of Korea
(Korea) would likely lead to continuation or recurrence of dumping, and
that revocation of the countervailing duty (CVD) order on light-walled
pipe and tube from the PRC would likely lead to continuation or
recurrence of a countervailable subsidy. The U.S. International Trade
Commission (the ITC) has also determined that revocation of these AD
and CVD orders would likely lead to a continuation or recurrence of
material injury to an industry in the United States. Accordingly, the
Department is publishing this notice of the continuation of these AD
and CVD orders.
DATES: Effective Date: June 23, 2014.
FOR FURTHER INFORMATION CONTACT: Dena Crossland or Angelica Mendoza,
AD/CVD Operations Office VI (AD), or Jennifer Meek or Nancy Decker, AD/
CVD Operations Office I (CVD), Enforcement and Compliance,
International Trade Administration, U.S. Department of Commerce, 14th
Street and Constitution Avenue NW., Washington, DC 20230; telephone:
(202) 482-3362 or (202) 482-3019, respectively.
SUPPLEMENTARY INFORMATION:
Background
On April 2, 2013, the Department of Commerce (the Department)
initiated the first five-year (``sunset'') reviews of the AD orders on
light-walled pipe and tube from Mexico, Turkey, the PRC, and Korea \1\
(collectively, the AD Orders) and the first sunset review of the
countervailing duty order on light-walled pipe and tube from the PRC
\2\ (CVD Order) pursuant to sections 751(c) and 752 of the Tariff Act
of 1930, as amended (the Act).\3\ As a result of these sunset reviews,
the Department found that revocation of the AD Orders would likely lead
to continuation or recurrence of dumping and that revocation of the CVD
Order would likely lead to continuation or recurrence of
countervailable subsidies and, therefore, notified the ITC of the
magnitude of the margins of dumping and the subsidy rates likely to
prevail should the AD Orders and the CVD Order be revoked.\4\
---------------------------------------------------------------------------
\1\ See Light-Walled Rectangular Pipe and Tube from Mexico, the
People's Republic of China, and the Republic of Korea: Antidumping
Duty Orders; Light-Walled Rectangular Pipe and Tube from the
Republic of Korea: Notice of Amended Final Determination of Sales at
Less Than Fair Value, 73 FR 45403, 45405 (August 5, 2008); Notice of
Antidumping Duty Order: Light-Walled Rectangular Pipe and Tube From
Turkey, 73 FR 31065 (May 30, 2008).
\2\ See Light-Walled Rectangular Pipe and Tube from the People's
Republic of China: Notice of Countervailing Duty Order, 73 FR 45405
(August 5, 2008).
\3\ See Initiation of Five-Year (``Sunset'') Review, 78 FR 19647
(April 2, 2013).
\4\ See Final Results of Expedited Sunset Reviews of Antidumping
Duty Orders: Light-Walled Rectangular Pipe and Tube From Mexico,
Turkey, the People's Republic of China, and the Republic of Korea,
78 FR 47671 (August 6, 2013) and Light-Walled Rectangular Pipe and
Tube From the People's Republic of China: Final Results of the
Expedited First Sunset Review of the Countervailing Duty Order, 78
FR 48416 (August 8, 2013).
---------------------------------------------------------------------------
On June 13, 2014, the ITC published its determination, pursuant to
sections 751(c)(1) and 752(a) of the Act, that revocation of the AD
Orders and the CVD Order would likely lead to continuation or
recurrence of material injury within a reasonably foreseeable time.\5\
---------------------------------------------------------------------------
\5\ See Light-Walled Rectangular Pipe from China, Korea, Mexico
and Turkey; Determinations, 79 FR 33950 (June 13, 2014); see also
ITC Publication 4470 (June 2014) entitled Light-Walled Rectangular
Pipe and Tube from China, Korea, Mexico, and Turkey (Inv. Nos. 701-
TA-449 and 731-TA-1118-1121 (Review)).
---------------------------------------------------------------------------
Scope of the Orders
The merchandise subject to the orders is certain welded carbon
quality light-walled steel pipe and tube, of rectangular (including
square) cross section, having a wall thickness of less than 4 mm. The
term carbon-quality steel includes both carbon steel and
[[Page 35523]]
alloy steel which contains only small amounts of alloying elements.
Specifically, the term carbon-quality includes products in which none
of the elements listed below exceeds the quantity by weight
respectively indicated: 1.80 percent of manganese, or 2.25 percent of
silicon, or 1.00 percent of copper, or 0.50 percent of aluminum, or
1.25 percent of chromium, or 0.30 percent of cobalt, or 0.40 percent of
lead, or 1.25 percent of nickel, or 0.30 percent of tungsten, or 0.10
percent of molybdenum, or 0.10 percent of niobium, or 0.15 percent
vanadium, or 0.15 percent of zirconium. The description of carbon-
quality is intended to identify carbon-quality products within the
scope. The welded carbon-quality rectangular pipe and tube subject to
the Orders is currently classified under the Harmonized Tariff Schedule
of the United States (HTSUS) subheadings 7306.61.50.00 and
7306.61.70.60. While HTSUS subheadings are provided for convenience and
customs purposes, the written description of the scope of the orders is
dispositive.
Continuation of the Orders
As a result of the determinations by the Department and the ITC
that revocation of the AD Orders and the CVD Order would likely lead to
continuation or recurrence of dumping and a countervailable subsidy,
and material injury to an industry in the United States, pursuant to
sections 751(c) and 751(d)(2) of the Act, the Department hereby orders
the continuation of the AD Orders and the CVD Order.
U.S. Customs and Border Protection will continue to collect cash
deposits at the rates in effect at the time of entry for all imports of
subject merchandise. The effective date of the continuation of the AD
Orders and the CVD Order is the date of publication in the Federal
Register of this notice of continuation. Pursuant to section 751(c)(2)
of the Act, the Department intends to initiate the next sunset reviews
of these orders not later than 30 days prior to the fifth anniversary
of the effective date of this continuation.
These sunset reviews and this notice are in accordance with section
751(c) of the Act and published pursuant to section 777(i)(1) of the
Act.
Dated: June 13, 2014.
Lynn Fischer Fox,
Deputy Assistant Secretary for Policy and Negotiations.
[FR Doc. 2014-14604 Filed 6-20-14; 8:45 am]
BILLING CODE 3510-DS-P