Material Hoists, Personnel Hoists, and Elevators Standard; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements, 35187-35189 [2014-14329]
Download as PDF
Federal Register / Vol. 79, No. 118 / Thursday, June 19, 2014 / Notices
Oakland, CA; Lutron Electronics Co.,
Inc., Coopersburg, PA; Patrick M
Duggan Enterprises, Inc., Valley Cottage,
NY; Yokogawa Electric Corporation,
Tokyo, JAPAN; Reliant Energy Retail
Services, Inc., Houston, TX; and IONEX
Energy Storage Systems, Inc., Austin,
TX, have withdrawn as parties to this
venture.
No other changes have been made in
either the membership or planned
activity of the group research project.
Membership in this group research
project remains open, and MSGIP 2.0
intends to file additional written
notifications disclosing all changes in
membership.
On February 5, 2013, MSGIP 2.0 filed
its original notification pursuant to
Section 6(a) of the Act. The Department
of Justice published a notice in the
Federal Register pursuant to Section
6(b) of the Act on March 7, 2013 (78 FR
14836).
The last notification was filed with
the Department on March 11, 2014. A
notice was published in the Federal
Register pursuant to Section 6(b) of the
Act on April 15, 2014 (79 FR 21289).
Patricia A. Brink,
Director of Civil Enforcement, Antitrust
Division.
BILLING CODE P
DEPARTMENT OF JUSTICE
Antitrust Division
emcdonald on DSK67QTVN1PROD with NOTICES
Notice Pursuant to the National
Cooperative Research and Production
Act of 1993—PXI System Alliance, Inc.
Notice is hereby given that, on May
19, 2014, pursuant to Section 6(a) of the
National Cooperative Research and
Production Act of 1993, 15 U.S.C. 4301
et seq. (‘‘the Act’’), PXI Systems
Alliance, Inc. has filed written
notifications simultaneously with the
Attorney General and the Federal Trade
Commission disclosing changes in its
membership. The notifications were
filed for the purpose of extending the
Act’s provisions limiting the recovery of
antitrust plaintiffs to actual damages
under specified circumstances.
Specifically, Hitech, Xi’an City,
PEOPLE’S REPUBLIC OF CHINA; and
Brilliant Instruments, Inc., Campbell,
CA, have been added as parties to this
venture.
Also, Embedded Planet, Cleveland,
OH; and Logic Instrument S.A.,
DOMONT, Cedex, FRANCE, have
withdrawn as parties to this venture.
No other changes have been made in
either the membership or planned
17:25 Jun 18, 2014
Jkt 232001
Patricia A. Brink,
Director of Civil Enforcement, Antitrust
Division.
On April 11, 2001, DVD CCA filed its
original notification pursuant to Section
6(a) of the Act. The Department of
Justice published a notice in the Federal
Register pursuant to Section 6(b) of the
Act on August 3, 2001 (66 FR 40727).
The last notification was filed with
the Department on March 6, 2014. A
notice was published in the Federal
Register pursuant to Section 6(b) of the
Act on April 15, 2014 (79 FR 21289).
Patricia A. Brink,
Director of Civil Enforcement, Antitrust
Division.
[FR Doc. 2014–14294 Filed 6–18–14; 8:45 am]
BILLING CODE P
DEPARTMENT OF LABOR
[FR Doc. 2014–14305 Filed 6–18–14; 8:45 am]
Occupational Safety and Health
Administration
BILLING CODE P
[Docket No. OSHA–2010–0052]
DEPARTMENT OF JUSTICE
Antitrust Division
Notice Pursuant to the National
Cooperative Research and Production
Act of 1993—DVD Copy Control
Association
[FR Doc. 2014–14304 Filed 6–18–14; 8:45 am]
VerDate Mar<15>2010
activity of the group research project.
Membership in this group research
project remains open, and PXI Systems
Alliance, Inc. intends to file additional
written notifications disclosing all
changes in membership.
On November 22, 2000, PXI Systems
Alliance, Inc. filed its original
notification pursuant to Section 6(a) of
the Act. The Department of Justice
published a notice in the Federal
Register pursuant to Section 6(b) of the
Act on March 8, 2001 (66 FR 13971).
The last notification was filed with
the Department on March 11, 2014. A
notice was published in the Federal
Register pursuant to Section 6(b) of the
Act on April 15, 2014 (79 FR 21289).
35187
Notice is hereby given that, on May
14, 2014, pursuant to Section 6(a) of the
National Cooperative Research and
Production Act of 1993, 15 U.S.C. 4301
et seq. (‘‘the Act’’), DVD Copy Control
Association (‘‘DVD CCA’’) has filed
written notifications simultaneously
with the Attorney General and the
Federal Trade Commission disclosing
changes in its membership. The
notifications were filed for the purpose
of extending the Act’s provisions
limiting the recovery of antitrust
plaintiffs to actual damages under
specified circumstances. Specifically,
Hitachi-LG Data Storage, Inc., Tokyo,
JAPAN, and Skypine Electronics
(Shenzhen) Co., Ltd., Shenzhen City,
PEOPLE’S REPUBLIC OF CHINA, have
been added as parties to this venture.
Also, City Brand International
Limited, Kwun Tong, Kowloon, HONG
KONG-CHINA, and Shenzhen Sea Star
Technology Co., Ltd., Shenzhen,
PEOPLE’S REPUBLIC OF CHINA, have
withdrawn as parties to this venture.
No other changes have been made in
either the membership or planned
activity of the group research project.
Membership in this group research
project remains open, and DVD CCA
intends to file additional written
notifications disclosing all changes in
membership.
PO 00000
Frm 00040
Fmt 4703
Sfmt 4703
Material Hoists, Personnel Hoists, and
Elevators Standard; Extension of the
Office of Management and Budget’s
(OMB) Approval of Information
Collection (Paperwork) Requirements
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comments.
AGENCY:
OSHA solicits public
comments concerning its proposal to
extend OMB approval of the
information collection requirements
specified in the Standard on Material
Hoists, Personnel Hoists, and Elevators
(29 CFR 1926.552).
DATES: Comments must be submitted
(postmarked, sent, or received) by
August 18, 2014.
ADDRESSES:
Electronically: You may submit
comments and attachments
electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for submitting
comments.
Facsimile: If your comments,
including attachments, are not longer
than 10 pages, you may fax them to the
OSHA Docket Office at (202) 693–1648.
Mail, hand delivery, express mail,
messenger, or courier service: When
using this method, you must submit a
copy of your comments and attachments
to the OSHA Docket Office, Docket No.
OSHA–2010–0052, U.S. Department of
Labor, Occupational Safety and Health
Administration, Room N–2625, 200
Constitution Avenue NW., Washington,
DC 20210. Deliveries (hand, express
mail, messenger, and courier service)
are accepted during the Department of
SUMMARY:
E:\FR\FM\19JNN1.SGM
19JNN1
35188
Federal Register / Vol. 79, No. 118 / Thursday, June 19, 2014 / Notices
Labor’s and Docket Office’s normal
business hours, 8:15 a.m. to 4:45 p.m.,
e.t.
Instructions: All submissions must
include the Agency name and the OSHA
docket number (OSHA–2010–0052) for
the Information Collection Request
(ICR). All comments, including any
personal information you provide, are
placed in the public docket without
change, and may be made available
online at https://www.regulations.gov.
For further information on submitting
comments see the ‘‘Public
Participation’’ heading in the section of
this notice titled SUPPLEMENTARY
INFORMATION.
Docket: To read or download
comments or other material in the
docket, go to https://www.regulations.gov
or the OSHA Docket Office at the
address above. All documents in the
docket (including this Federal Register
notice) are listed in the https://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download from the Web site. All
submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
You may also contact Theda Kenney at
the address below to obtain a copy of
the ICR.
FOR FURTHER INFORMATION CONTACT:
Theda Kenney or Todd Owen,
Directorate of Standards and Guidance,
OSHA, U.S. Department of Labor, Room
N–3609, 200 Constitution Avenue NW.,
Washington, DC 20210; telephone (202)
693–2222.
SUPPLEMENTARY INFORMATION:
emcdonald on DSK67QTVN1PROD with NOTICES
I. Background
The Department of Labor, as part of its
continuing effort to reduce paperwork
and respondent (i.e., employer) burden,
conducts a preclearance consultation
program to provide the public with an
opportunity to comment on proposed
and continuing information collection
requirements in accord with the
Paperwork Reduction Act of 1995
(PRA–95) (44 U.S.C. 3506(c)(2)(A)). This
program ensures that information is in
the desired format, reporting burden
(time and costs) is minimal, collection
instruments are clearly understood, and
OSHA’s estimate of the information
collection burden is accurate. The
Occupational Safety and Health Act of
1970 (the OSH Act) (29 U.S.C. 651 et
seq.) authorizes information collection
by employers as necessary or
appropriate for enforcement of the Act
or for developing information regarding
the causes and prevention of
occupational injuries, illnesses, and
VerDate Mar<15>2010
17:25 Jun 18, 2014
Jkt 232001
accidents (29 U.S.C. 657). The OSH Act
also requires that OSHA obtain such
information with minimum burden
upon employers, especially those
operating small businesses, and to
reduce to the maximum extent feasible
unnecessary duplication of efforts in
obtaining information (29 U.S.C. 657).
Paragraph (a)(2) of the Material
Hoists, Personnel Hoists, and Elevators
Standard requires that the rated load
capacities, recommended operating
speeds, and special hazard warnings or
instructions be posted on cars and
platforms. Paragraph (b)(1)(i) requires
that operating rules for material hoists
be established and posted at the
operator’s station of the hoist. These
rules shall include signal system and
allowable line speed for various loads.
Paragraph (c)(10) requires that cars be
provided with a capacity and data plate
secured in a conspicuous place on the
car or crosshead.
These posting requirements are used
by the operator and crew of the material
and personnel hoists to determine how
to use the specific machine and how
much it will be able to lift as assembled
in one or a number of particular
configurations. If not properly used, the
machine would be subject to failures,
endangering the workers in the
immediate vicinity.
Paragraph (c)(15) requires that a test
and inspection of all functions and
safety devices be made following the
assembly and erection of hoists. The test
and inspection are to be conducted
under the supervision of a competent
person. A similar inspection and test is
required following major alteration of an
existing installation. All hoists shall be
inspected and tested at three-month
intervals. A certification record (the
most recent) of the test and inspection
must be kept on file, including the date
the test and inspection was completed,
the identification of the equipment and
the signature of the person who
performed the test and inspection. This
certification ensures that the equipment
has been tested and is in safe operating
condition. The most recent certification
record will be disclosed to a
Compliance Safety and Health Officer
during an OSHA inspection.
II. Special Issues for Comment
OSHA has a particular interest in
comments on the following issues:
• Whether the proposed information
collection requirements are necessary
for the proper performance of the
Agency’s functions, including whether
the information is useful;
• The accuracy of OSHA’s estimate of
the burden (time and costs) of the
information collection requirements,
PO 00000
Frm 00041
Fmt 4703
Sfmt 4703
including the validity of the
methodology and assumptions used;
• The quality, utility, and clarity of
the information collected; and
• Ways to minimize the burden on
employers who must comply; for
example, by using automated or other
technological information collection
and transmission techniques.
III. Proposed Actions
OSHA is requesting that OMB extend
its approval of the information
collection requirements contained in the
Standard on Material Hoists, Personnel
Hoists, and Elevators (29 CFR 1926.552).
The Agency is requesting an adjustment
decrease from 20,957 burden hours to
7,103 burden hours, a total reduction of
13,854 burden hours. The decrease is
due to a decrease in the number hoists
being used in the industry.
Type of Review: Extension of a
currently approved collection.
Title: Material Hoists, Personnel
Hoists, and Elevators (29 CFR 1926.552).
OMB Control Number: 1218–0231.
Affected Public: Business or other forprofits.
Number of Respondents: 5,868.
Frequency of Responses: On occasion.
Number of Responses: 26,547.
Average Time per Response: Varies
from 2 minutes (.03 hour) for a
supervisor to disclose test and
inspection certification records to 60
minutes (1 hour) for a construction
worker to obtain and post information
for hoists.
Estimated Total Burden Hours: 7,103.
Estimated Cost (Operation and
Maintenance): $0.
IV. Public Participation—Submission of
Comments on This Notice and Internet
Access to Comments and Submissions
You may submit comments in
response to this document as follows:
(1) Electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal; (2) by
facsimile (fax); or (3) by hard copy. All
comments, attachments, and other
material must identify the Agency name
and the OSHA docket number (Docket
No. OSHA–2010–0052 for the ICR. You
may supplement electronic submissions
by uploading document files
electronically. If you wish to mail
additional materials in reference to an
electronic or facsimile submission, you
must submit them to the OSHA Docket
Office (see the section of this notice
titled ADDRESSES). The additional
materials must clearly identify your
electronic comments by your name,
date, and the docket number so the
Agency can attach them to your
comments.
E:\FR\FM\19JNN1.SGM
19JNN1
Federal Register / Vol. 79, No. 118 / Thursday, June 19, 2014 / Notices
Because of security procedures, the
use of regular mail may cause a
significant delay in the receipt of
comments. For information about
security procedures concerning the
delivery of materials by hand, express
delivery, messenger, or courier service,
please contact the OSHA Docket Office
at (202) 693–2350, (TTY (877) 889–
5627).
Comments and submissions are
posted without change at https://
www.regulations.gov. Therefore, OSHA
cautions commenters about submitting
personal information such as social
security numbers and date of birth.
Although all submissions are listed in
the https://www.regulations.gov index,
some information (e.g., copyrighted
material) is not publicly available to
read or download from this Web site.
All submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
Information on using the https://
www.regulations.gov Web site to submit
comments and access the docket is
available at the Web site’s ‘‘User Tips’’
link. Contact the OSHA Docket Office
for information about materials not
available from the Web site, and for
assistance in using the Internet to locate
docket submissions.
V. Authority and Signature
David Michaels, Ph.D., MPH,
Assistant Secretary of Labor for
Occupational Safety and Health,
directed the preparation of this notice.
The authority for this notice is the
Paperwork Reduction Act of 1995 (44
U.S.C. 3506 et seq.) and Secretary of
Labor’s Order No. 1–2012 (77 FR 3912).
Signed at Washington, DC, on June 13,
2014.
David Michaels,
Assistant Secretary of Labor for Occupational
Safety and Health.
[FR Doc. 2014–14329 Filed 6–18–14; 8:45 am]
BILLING CODE 4510–26–P
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
emcdonald on DSK67QTVN1PROD with NOTICES
[Docket No. OSHA–2011–0055]
Steel Erection; Extension of the Office
of Management and Budget’s (OMB)
Approval of Information Collection
(Paperwork) Requirements
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comments.
AGENCY:
OSHA solicits public
comments concerning its proposal to
SUMMARY:
VerDate Mar<15>2010
17:25 Jun 18, 2014
Jkt 232001
extend OMB approval of the
information collection requirements
specified in the Standard on Steel
Erection (29 CFR part 1926, subpart R).
DATES: Comments must be submitted
(postmarked, sent, or received) by
August 18, 2014.
ADDRESSES:
Electronically: You may submit
comments and attachments
electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for submitting
comments.
Facsimile: If your comments,
including attachments, are not longer
than 10 pages you may fax them to the
OSHA Docket Office at (202) 693–1648.
Mail, hand delivery, express mail,
messenger, or courier service: When
using this method, you must submit a
copy of your comments and attachments
to the OSHA Docket Office, OSHA
Docket No. OSHA–2011–0055, U.S.
Department of Labor, Occupational
Safety and Health Administration,
Room N–2625, 200 Constitution Avenue
NW., Washington, DC 20210. Deliveries
(hand, express mail, messenger, and
courier service) are accepted during the
Department of Labor’s and Docket
Office’s normal business hours, 8:15
a.m. to 4:45 p.m., e.t.
Instructions: All submissions must
include the Agency name and the OSHA
docket number (OSHA–2011–0055) for
the Information Collection request (ICR).
All comments, including any personal
information you provide, are placed in
the public docket without change, and
may be made available online at
https://www.regulations.gov. For further
information on submitting comments,
see the ‘‘Public Participation’’ heading
in the section of this notice titled
SUPPLEMENTARY INFORMATION.
Docket: To read or download
comments or other material in the
docket, go to https://www.regulations.gov
or the OSHA Docket Office at the
address above. All documents in the
docket (including this Federal Register
notice) are listed in the https://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download from the Web site. All
submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
You may also contact Theda Kenney at
the address below to obtain a copy of
the ICR.
FOR FURTHER INFORMATION CONTACT:
Theda Kenney or Todd Owen,
Directorate of Standards and Guidance,
OSHA, U.S. Department of Labor, Room
PO 00000
Frm 00042
Fmt 4703
Sfmt 4703
35189
N–3609, 200 Constitution Avenue NW.,
Washington, DC 20210; telephone (202)
693–2222.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of its
continuing effort to reduce paperwork
and respondent (i.e., employer) burden,
conducts a preclearance consultation
program to provide the public with an
opportunity to comment on proposed
and continuing information collection
requirements in accord with the
Paperwork Reduction Act of 1995
(PRA–95) (44 U.S.C. 3506(c)(2)(A)). This
program ensures that information is in
the desired format, reporting burden
(time and costs) is minimal, collection
instruments are clearly understood, and
OSHA’s estimate of the information
collection burden is accurate. The
Occupational Safety and Health Act of
1970 (the OSH Act) (29 U.S.C. 651 et
seq.) authorizes information collection
by employers as necessary or
appropriate for enforcement of the Act
or for developing information regarding
the causes and prevention of
occupational injuries, illnesses, and
accidents (29 U.S.C. 657). The OSH Act
also requires that OSHA obtain such
information with minimum burden
upon employers, especially those
operating small businesses, and to
reduce to the maximum extent feasible
unnecessary duplication of efforts in
obtaining information (29 U.S.C. 657).
Section 1926.752(a)(1). Description of
the requirement. Based on the results of
a specified method for testing fieldcured samples, the controlling
contractor must provide the steel erector
with written notification that the
concrete in the footings, piers, and
walls, or the mortar in the masonry
piers and walls, is at 75% of its
minimum compressive-design strength
or has sufficient strength to support
loads imposed during steel erection.
Note: This is not and will not be
enforced for mortar in piers and walls
until OSHA defines an appropriate
substitute or until an appropriate
American Society for Testing and
Materials (ASTM) test method is
developed.
Sections 1926.752(a)(2) and
1926.755(b)(1). Description of the
requirements. Under § 1926.752(a)(2),
the controlling contractor, before it
authorizes commencement of steel
erection, must notify the steel erector in
writing that any repairs, replacements,
and modifications to anchor bolts (rods)
have been made in accord with
§ 1926.755(b)(1) which requires that the
controlling contractor obtain approval
from the project structural engineer of
E:\FR\FM\19JNN1.SGM
19JNN1
Agencies
[Federal Register Volume 79, Number 118 (Thursday, June 19, 2014)]
[Notices]
[Pages 35187-35189]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-14329]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2010-0052]
Material Hoists, Personnel Hoists, and Elevators Standard;
Extension of the Office of Management and Budget's (OMB) Approval of
Information Collection (Paperwork) Requirements
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Request for public comments.
-----------------------------------------------------------------------
SUMMARY: OSHA solicits public comments concerning its proposal to
extend OMB approval of the information collection requirements
specified in the Standard on Material Hoists, Personnel Hoists, and
Elevators (29 CFR 1926.552).
DATES: Comments must be submitted (postmarked, sent, or received) by
August 18, 2014.
ADDRESSES:
Electronically: You may submit comments and attachments
electronically at https://www.regulations.gov, which is the Federal
eRulemaking Portal. Follow the instructions online for submitting
comments.
Facsimile: If your comments, including attachments, are not longer
than 10 pages, you may fax them to the OSHA Docket Office at (202) 693-
1648.
Mail, hand delivery, express mail, messenger, or courier service:
When using this method, you must submit a copy of your comments and
attachments to the OSHA Docket Office, Docket No. OSHA-2010-0052, U.S.
Department of Labor, Occupational Safety and Health Administration,
Room N-2625, 200 Constitution Avenue NW., Washington, DC 20210.
Deliveries (hand, express mail, messenger, and courier service) are
accepted during the Department of
[[Page 35188]]
Labor's and Docket Office's normal business hours, 8:15 a.m. to 4:45
p.m., e.t.
Instructions: All submissions must include the Agency name and the
OSHA docket number (OSHA-2010-0052) for the Information Collection
Request (ICR). All comments, including any personal information you
provide, are placed in the public docket without change, and may be
made available online at https://www.regulations.gov. For further
information on submitting comments see the ``Public Participation''
heading in the section of this notice titled SUPPLEMENTARY INFORMATION.
Docket: To read or download comments or other material in the
docket, go to https://www.regulations.gov or the OSHA Docket Office at
the address above. All documents in the docket (including this Federal
Register notice) are listed in the https://www.regulations.gov index;
however, some information (e.g., copyrighted material) is not publicly
available to read or download from the Web site. All submissions,
including copyrighted material, are available for inspection and
copying at the OSHA Docket Office. You may also contact Theda Kenney at
the address below to obtain a copy of the ICR.
FOR FURTHER INFORMATION CONTACT: Theda Kenney or Todd Owen, Directorate
of Standards and Guidance, OSHA, U.S. Department of Labor, Room N-3609,
200 Constitution Avenue NW., Washington, DC 20210; telephone (202) 693-
2222.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of its continuing effort to reduce
paperwork and respondent (i.e., employer) burden, conducts a
preclearance consultation program to provide the public with an
opportunity to comment on proposed and continuing information
collection requirements in accord with the Paperwork Reduction Act of
1995 (PRA-95) (44 U.S.C. 3506(c)(2)(A)). This program ensures that
information is in the desired format, reporting burden (time and costs)
is minimal, collection instruments are clearly understood, and OSHA's
estimate of the information collection burden is accurate. The
Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651
et seq.) authorizes information collection by employers as necessary or
appropriate for enforcement of the Act or for developing information
regarding the causes and prevention of occupational injuries,
illnesses, and accidents (29 U.S.C. 657). The OSH Act also requires
that OSHA obtain such information with minimum burden upon employers,
especially those operating small businesses, and to reduce to the
maximum extent feasible unnecessary duplication of efforts in obtaining
information (29 U.S.C. 657).
Paragraph (a)(2) of the Material Hoists, Personnel Hoists, and
Elevators Standard requires that the rated load capacities, recommended
operating speeds, and special hazard warnings or instructions be posted
on cars and platforms. Paragraph (b)(1)(i) requires that operating
rules for material hoists be established and posted at the operator's
station of the hoist. These rules shall include signal system and
allowable line speed for various loads. Paragraph (c)(10) requires that
cars be provided with a capacity and data plate secured in a
conspicuous place on the car or crosshead.
These posting requirements are used by the operator and crew of the
material and personnel hoists to determine how to use the specific
machine and how much it will be able to lift as assembled in one or a
number of particular configurations. If not properly used, the machine
would be subject to failures, endangering the workers in the immediate
vicinity.
Paragraph (c)(15) requires that a test and inspection of all
functions and safety devices be made following the assembly and
erection of hoists. The test and inspection are to be conducted under
the supervision of a competent person. A similar inspection and test is
required following major alteration of an existing installation. All
hoists shall be inspected and tested at three-month intervals. A
certification record (the most recent) of the test and inspection must
be kept on file, including the date the test and inspection was
completed, the identification of the equipment and the signature of the
person who performed the test and inspection. This certification
ensures that the equipment has been tested and is in safe operating
condition. The most recent certification record will be disclosed to a
Compliance Safety and Health Officer during an OSHA inspection.
II. Special Issues for Comment
OSHA has a particular interest in comments on the following issues:
Whether the proposed information collection requirements
are necessary for the proper performance of the Agency's functions,
including whether the information is useful;
The accuracy of OSHA's estimate of the burden (time and
costs) of the information collection requirements, including the
validity of the methodology and assumptions used;
The quality, utility, and clarity of the information
collected; and
Ways to minimize the burden on employers who must comply;
for example, by using automated or other technological information
collection and transmission techniques.
III. Proposed Actions
OSHA is requesting that OMB extend its approval of the information
collection requirements contained in the Standard on Material Hoists,
Personnel Hoists, and Elevators (29 CFR 1926.552). The Agency is
requesting an adjustment decrease from 20,957 burden hours to 7,103
burden hours, a total reduction of 13,854 burden hours. The decrease is
due to a decrease in the number hoists being used in the industry.
Type of Review: Extension of a currently approved collection.
Title: Material Hoists, Personnel Hoists, and Elevators (29 CFR
1926.552).
OMB Control Number: 1218-0231.
Affected Public: Business or other for-profits.
Number of Respondents: 5,868.
Frequency of Responses: On occasion.
Number of Responses: 26,547.
Average Time per Response: Varies from 2 minutes (.03 hour) for a
supervisor to disclose test and inspection certification records to 60
minutes (1 hour) for a construction worker to obtain and post
information for hoists.
Estimated Total Burden Hours: 7,103.
Estimated Cost (Operation and Maintenance): $0.
IV. Public Participation--Submission of Comments on This Notice and
Internet Access to Comments and Submissions
You may submit comments in response to this document as follows:
(1) Electronically at https://www.regulations.gov, which is the Federal
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All
comments, attachments, and other material must identify the Agency name
and the OSHA docket number (Docket No. OSHA-2010-0052 for the ICR. You
may supplement electronic submissions by uploading document files
electronically. If you wish to mail additional materials in reference
to an electronic or facsimile submission, you must submit them to the
OSHA Docket Office (see the section of this notice titled ADDRESSES).
The additional materials must clearly identify your electronic comments
by your name, date, and the docket number so the Agency can attach them
to your comments.
[[Page 35189]]
Because of security procedures, the use of regular mail may cause a
significant delay in the receipt of comments. For information about
security procedures concerning the delivery of materials by hand,
express delivery, messenger, or courier service, please contact the
OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).
Comments and submissions are posted without change at https://www.regulations.gov. Therefore, OSHA cautions commenters about
submitting personal information such as social security numbers and
date of birth. Although all submissions are listed in the https://www.regulations.gov index, some information (e.g., copyrighted
material) is not publicly available to read or download from this Web
site. All submissions, including copyrighted material, are available
for inspection and copying at the OSHA Docket Office. Information on
using the https://www.regulations.gov Web site to submit comments and
access the docket is available at the Web site's ``User Tips'' link.
Contact the OSHA Docket Office for information about materials not
available from the Web site, and for assistance in using the Internet
to locate docket submissions.
V. Authority and Signature
David Michaels, Ph.D., MPH, Assistant Secretary of Labor for
Occupational Safety and Health, directed the preparation of this
notice. The authority for this notice is the Paperwork Reduction Act of
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 1-2012
(77 FR 3912).
Signed at Washington, DC, on June 13, 2014.
David Michaels,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2014-14329 Filed 6-18-14; 8:45 am]
BILLING CODE 4510-26-P