Application(s) for Duty-Free Entry of Scientific Instruments, 34491 [2014-14156]

Download as PDF Federal Register / Vol. 79, No. 116 / Tuesday, June 17, 2014 / Notices DEPARTMENT OF COMMERCE International Trade Administration [A–570–012] Carbon and Certain Alloy Steel Wire Rod From the People’s Republic of China: Postponement of Preliminary Determination of Antidumping Duty Investigation Enforcement and Compliance, International Trade Administration, Department of Commerce. DATES: Effective Date: June 17, 2014. FOR FURTHER INFORMATION CONTACT: Brian Smith (202) 482–1766 or Brandon Custard (202) 482–1823; AD/CVD Operations, Office 2, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230. SUPPLEMENTARY INFORMATION: AGENCY: tkelley on DSK3SPTVN1PROD with NOTICES Postponement of Preliminary Determination On February 20, 2014, the Department of Commerce (the Department) initiated an antidumping duty investigation of imports of carbon and certain alloy steel wire rod from the People’s Republic of China. See Carbon and Certain Alloy Steel Wire Rod From the People’s Republic of China: Initiation of Antidumping Duty Investigation, 79 FR 11077 (February 27, 2014) (Initiation Notice). Pursuant to section 733(b)(1) of the Tariff Act of 1930, as amended (the Act) and 19 CFR 351.205(b), the Department shall issue its preliminary determination no later than 140 days after the date of initiation.1 Currently, the preliminary determination in this investigation is due on July 10, 2014. On June 4, 2014, ArcelorMittal USA LLC, Charter Steel, Evraz Pueblo, Gerdau Ameristeel US Inc., Keystone Consolidated Industries, Inc., and Nucor Corporation (hereafter, the petitioners) made timely requests, pursuant to section 733(c)(1)(A) of the Act and 19 CFR 351.205(e), for a 50-day postponement of the preliminary determination in the investigation.2 The petitioners stated that a postponement of the preliminary determination is necessary to ensure adequate time to analyze and submit comments on (1) the respondent’s questionnaire responses; (2) separate rate applications submitted by other companies; and (3) surrogate 1 In the Initiation Notice, the Department incorrectly stated that it would issue its preliminary determination no later than 140 days after the publication date of the initiation. 2 See the petitioners’ letter to the Department dated June 4, 2014. VerDate Mar<15>2010 16:43 Jun 16, 2014 Jkt 232001 values for consideration in the preliminary determination. Under section 733(c)(1)(A) of the Act, if the petitioner makes a timely request for an extension of the period within which the preliminary determination must be made under subsection (b)(1), then the Department may postpone making the preliminary determination under subsection (b)(1) until not later than the 190th day after the date on which the Department initiated the investigation. Therefore, for the reasons stated above and because there are no compelling reasons to deny the petitioners’ request pursuant to 19 CFR 351.205(e), the Department is postponing the preliminary determination in this investigation until August 29, 2014, which is 190 days from the date on which the Department initiated this investigation. The deadline for the final determination will continue to be 75 days after the date of the preliminary determination, unless extended. This notice is issued and published pursuant to section 733(c)(2) of the Act and 19 CFR 351.205(f)(1). Dated: June 11, 2014. Ronald K. Lorentzen, Acting Assistant Secretary for Enforcement and Compliance. [FR Doc. 2014–14158 Filed 6–16–14; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration Application(s) for Duty-Free Entry of Scientific Instruments Pursuant to Section 6(c) of the Educational, Scientific and Cultural Materials Importation Act of 1966 (Pub. L. 89–651, as amended by Pub. L. 106– 36; 80 Stat. 897; 15 CFR part 301), we invite comments on the question of whether instruments of equivalent scientific value, for the purposes for which the instruments shown below are intended to be used, are being manufactured in the United States. Comments must comply with 15 CFR 301.5(a)(3) and (4) of the regulations and be postmarked on or before July 7, 2014. Address written comments to Statutory Import Programs Staff, Room 3720, U.S. Department of Commerce, Washington, DC 20230. Applications may be examined between 8:30 a.m. and 5:00 p.m. at the U.S. Department of Commerce in Room 3720. Docket Number: 14–009. Applicant: Ohio State University, E447 Scott Laboratory, Department of Mechanical and Aerospace Engineering, 201 West PO 00000 Frm 00006 Fmt 4703 Sfmt 4703 34491 19th Avenue, Columbus, OH 43210. Instrument: Diode pumped, solid state high speed Nd:YVO4 laser system. Manufacturer: Edgewave GmgH, Germany. Intended Use: The instrument will be used to conduct particle imaging velocimetry, and Rayleigh scattering and planar laser-induced fluorescence, to understand the fundamental roles of fluid turbulence on scalar mixing and reaction rates by studying fundamental fluid mechanics and chemical kinetics in turbulent flows with and without chemical reaction and combustion. The primary targets are non-reacting turbulent flows consisting of compressed air and combusting turbulent flows with fuels of methane and oxidizer of air. The products of combustion are water, carbon dioxide, and nitrogen. The instrument is required to operate over a broad range of experiment conditions with specific targets of repetition rates ranging from 1 to 50 kHz. At these repetition rates, a minimum output power of 20 Watts is required at all operating conditions. A high-quality beam profile of M2<2 is also needed. The pulse duration of the laser must also be less than 10 nanoseconds. Without these characteristics, accurate velocity and scalar fields, including species concentration, temperature, and density cannot be measured. Justification for Duty-Free Entry: There are no instruments of the same general category manufactured in the United States. Application accepted by Commissioner of Customs: April 3, 2014. Dated: June 10, 2014. Gregory W. Campbell, Director of Subsidies Enforcement, Enforcement and Compliance. [FR Doc. 2014–14156 Filed 6–16–14; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration Healthcare Equipment, Services, and Technologies Trade Mission to Egypt, Jordan, and Israel May 16–21, 2015. International Trade Administration, Department of Commerce. ACTION: Notice. AGENCY: Mission Description The United States Department of Commerce, International Trade Administration, is organizing an executive-led healthcare equipment, E:\FR\FM\17JNN1.SGM 17JNN1

Agencies

[Federal Register Volume 79, Number 116 (Tuesday, June 17, 2014)]
[Notices]
[Page 34491]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-14156]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration


Application(s) for Duty-Free Entry of Scientific Instruments

    Pursuant to Section 6(c) of the Educational, Scientific and 
Cultural Materials Importation Act of 1966 (Pub. L. 89-651, as amended 
by Pub. L. 106-36; 80 Stat. 897; 15 CFR part 301), we invite comments 
on the question of whether instruments of equivalent scientific value, 
for the purposes for which the instruments shown below are intended to 
be used, are being manufactured in the United States.
    Comments must comply with 15 CFR 301.5(a)(3) and (4) of the 
regulations and be postmarked on or before July 7, 2014. Address 
written comments to Statutory Import Programs Staff, Room 3720, U.S. 
Department of Commerce, Washington, DC 20230. Applications may be 
examined between 8:30 a.m. and 5:00 p.m. at the U.S. Department of 
Commerce in Room 3720.
    Docket Number: 14-009. Applicant: Ohio State University, E447 Scott 
Laboratory, Department of Mechanical and Aerospace Engineering, 201 
West 19th Avenue, Columbus, OH 43210. Instrument: Diode pumped, solid 
state high speed Nd:YVO4 laser system. Manufacturer: Edgewave GmgH, 
Germany. Intended Use: The instrument will be used to conduct particle 
imaging velocimetry, and Rayleigh scattering and planar laser-induced 
fluorescence, to understand the fundamental roles of fluid turbulence 
on scalar mixing and reaction rates by studying fundamental fluid 
mechanics and chemical kinetics in turbulent flows with and without 
chemical reaction and combustion. The primary targets are non-reacting 
turbulent flows consisting of compressed air and combusting turbulent 
flows with fuels of methane and oxidizer of air. The products of 
combustion are water, carbon dioxide, and nitrogen. The instrument is 
required to operate over a broad range of experiment conditions with 
specific targets of repetition rates ranging from 1 to 50 kHz. At these 
repetition rates, a minimum output power of 20 Watts is required at all 
operating conditions. A high-quality beam profile of M\2\<2 is also 
needed. The pulse duration of the laser must also be less than 10 
nanoseconds. Without these characteristics, accurate velocity and 
scalar fields, including species concentration, temperature, and 
density cannot be measured. Justification for Duty-Free Entry: There 
are no instruments of the same general category manufactured in the 
United States. Application accepted by Commissioner of Customs: April 
3, 2014.

    Dated: June 10, 2014.
Gregory W. Campbell,
Director of Subsidies Enforcement, Enforcement and Compliance.
[FR Doc. 2014-14156 Filed 6-16-14; 8:45 am]
BILLING CODE 3510-DS-P