Toyota Motor North America, Inc.; Receipt of Petition for Temporary Exemption From an Electrical Safety Requirement of FMVSS No. 305, 33639-33641 [2014-13540]
Download as PDF
Federal Register / Vol. 79, No. 112 / Wednesday, June 11, 2014 / Notices
Officer for Department of
Transportation, National Highway
Traffic Safety Administration, or by
email at oira_submission@omb.eop.gov,
or fax: 202–395–5806.
Comments Are Invited On: Whether
the proposed collection of information
is necessary for the proper performance
of the functions of the Department of
Transportation, including whether the
information will have practical utility;
the accuracy of the Department’s
estimate of the burden of the proposed
information collection; ways to enhance
the quality, utility and clarity of the
information to be collected; and ways to
minimize the burden of the collection of
information on respondents, including
the use of automated collection
techniques or other forms of information
technology. A comment to OMB is most
effective if OMB receives it within 30
days of publication of this notice.
Authority: 44 U.S.C. Section 3506(c)(2)(A).
Issued in Washington, DC, on June 5, 2014.
Jeff Michael,
Associate Administrator, Research and
Program Development.
[FR Doc. 2014–13587 Filed 6–10–14; 8:45 am]
BILLING CODE 4910–59–P
DEPARTMENT OF TRANSPORTATION
National Highway Traffic Safety
Administration
[Docket No. NHTSA–2014–0068]
Toyota Motor North America, Inc.;
Receipt of Petition for Temporary
Exemption From an Electrical Safety
Requirement of FMVSS No. 305
National Highway Traffic
Safety Administration (NHTSA),
Department of Transportation (DOT).
ACTION: Notice of receipt of a petition for
a temporary exemption from a provision
of Federal Motor Vehicle Safety
Standard (FMVSS) No. 305, Electricpowered vehicles: electrolyte spillage
and electrical shock protection.
AGENCY:
In accordance with the
procedures in 49 CFR part 555, Toyota
Motor North America, Inc. (Toyota) has
petitioned the agency for a temporary
exemption from one requirement of
FMVSS No. 305. That portion of FMVSS
No. 305 requires manufacturers to
maintain a certain level of electrical
isolation (or reduce the voltage below
specified levels) of high voltage
electrical components of an electric
vehicle (EV) in the event of a crash in
order to protect the vehicle’s occupants
and first responders. Toyota states that
a forthcoming fuel cell vehicle (FCV)
ehiers on DSK2VPTVN1PROD with NOTICES
SUMMARY:
VerDate Mar<15>2010
15:19 Jun 10, 2014
Jkt 232001
model cannot meet this requirement due
to certain design characteristics of their
FCVs. Instead, Toyota states that it is
using alternative strategies to help
ensure that occupants and first
responders are protected in the event of
a crash. NHTSA has made no judgment
on the merits of the application. This
notice of receipt of an application for a
temporary exemption is published in
accordance with statutory and
administrative provisions.
DATES: You should submit your
comments not later than July 11, 2014.
FOR FURTHER INFORMATION CONTACT:
Jesse Chang, Office of the Chief Counsel,
NCC–112, National Highway Traffic
Safety Administration, 1200 New Jersey
Avenue SE., Washington, DC 20590.
Telephone: (202) 366–2992; Fax: (202)
366–3820.
ADDRESSES: We invite you to submit
comments on the application described
above. You may submit comments
identified by docket number in the
heading of this notice by any of the
following methods:
• Fax: 1–202–493–2251.
• Mail: U.S. Department of
Transportation, Docket Operations, M–
30, Room W12–140, 1200 New Jersey
Avenue SE., Washington, DC 20590.
• Hand Delivery: 1200 New Jersey
Avenue SE., West Building Ground
Floor, Room W12–140, Washington, DC,
between 9 a.m. and 5 p.m., Monday
through Friday, except Federal
Holidays.
• Federal eRulemaking Portal: Go to
https://www.regulations.gov. Follow the
online instructions for submitting
comments.
Instructions: All submissions must
include the agency name and docket
number. Note that all comments
received will be posted without change
to https://www.regulations.gov, including
any personal information provided.
Please see the Privacy Act discussion
below. We will consider all comments
received before the close of business on
the comment closing date indicated
above. To the extent possible, we will
also consider comments filed after the
closing date.
Docket: For access to the docket to
read background documents or
comments received, go to https://
www.regulations.gov at any time or to
1200 New Jersey Avenue SE., West
Building Ground Floor, Room W12–140,
Washington, DC 20590, between 9 a.m.
and 5 p.m., Monday through Friday,
except Federal Holidays. Telephone:
(202) 366–9826.
Privacy Act: Anyone is able to search
the electronic form of all comments
received into any of our dockets by the
PO 00000
Frm 00148
Fmt 4703
Sfmt 4703
33639
name of the individual submitting the
comment (or signing the comment, if
submitted on behalf of an association,
business, labor union, etc.). You may
review DOT’s complete Privacy Act
Statement in the Federal Register
published on April 11, 2000 (65 FR
19476) or you may visit https://
www.dot.gov/privacy.html.
Confidential Business Information: If
you wish to submit any information
under a claim of confidentiality, you
should submit three copies of your
complete submission, including the
information you claim to be confidential
business information, to the Chief
Counsel, NHTSA, at the address given
under FOR FURTHER INFORMATION
CONTACT. In addition, you should
submit two copies, from which you
have deleted the claimed confidential
business information, to Docket
Management at the address given above.
When you send a comment containing
information claimed to be confidential
business information, you should
include a cover letter setting forth the
information specified in our
confidential business information
regulation (49 CFR part 512).
SUPPLEMENTARY INFORMATION:
I. The Electrical Safety Requirement in
FMVSS No. 305 and its Purpose
In 2000, the agency created Federal
Motor Vehicle Safety Standard (FMVSS)
No. 305 to help facilitate the safe
introduction of EVs into the
marketplace.1 While FMVSS No. 305
addresses a number of safety concerns
relevant to EVs (e.g., battery retention
and electrolyte spillage), paragraph S5.3
of the standard, at issue here, requires
EVs to maintain electrical isolation of
various major electrical components
(e.g., components related to the
vehicle’s propulsion) after specified
crash tests. The purpose of the
requirements in S5.3 is to reduce the
risk of high voltage electrical shock to
the vehicle’s occupants and the first
responders in the event of a crash.2
NHTSA published its most recent
major update to the S5.3 requirements
in 2010.3 In this update, NHTSA
expanded the types of electrical
components that would be covered by
the requirement and the options
available for complying with the
requirement. Namely, the agency
expanded the coverage of the standard
to include other high voltage
1 See
65 FR 57980 (September 27, 2000).
id.
3 See 75 FR 33515 (June 14, 2010). NHTSA also
answered petitions for reconsideration on this final
rule on July 29, 2011 dealing with clarifying the
definitions and test procedures of the June 14, 2010
final rule. See 76 FR 45436.
2 See
E:\FR\FM\11JNN1.SGM
11JNN1
33640
Federal Register / Vol. 79, No. 112 / Wednesday, June 11, 2014 / Notices
ehiers on DSK2VPTVN1PROD with NOTICES
components of the EV beyond the
propulsion battery. Further, the updated
requirements recognize the different
safety implications between Alternating
Current (AC) and Direct Current (DC) by
establishing different requirements for
each type of electrical component.
FMVSS No. 305 further specifies
various crash test conditions under
which a vehicle is required to meet the
aforementioned requirements.
Depending on the particular crash
scenario (e.g., frontal barrier, rear
moving barrier, and side moving
deformable barrier), the tests can be
conducted at any speed up to a
maximum speed of 48, 80, or 54 km/h,
respectively.4
The subject of Toyota’s petition is
these electrical safety requirements in
paragraph S5.3 of FMVSS No. 305.
Toyota states in its petition that certain
design aspects of their Fuel Cell
Vehicles (FCVs) preclude the vehicle
from meeting the electrical safety
requirements in paragraph S5.3 of
FMVSS No. 305. However, Toyota states
that it will implement various
alternative strategies to ensure that the
vehicle occupants and first responders
are protected from an undue risk of high
voltage electrical shock after a crash.
Section III below describes Toyota’s
petition in more detail.
II. Statutory Authority for Temporary
Exemptions
The National Traffic and Motor
Vehicle Safety Act (Safety Act), codified
at 49 U.S.C. Chapter 301, provides the
Secretary of Transportation authority to
exempt, on a temporary basis and under
specified circumstances, motor vehicles
from a motor vehicle safety standard or
bumper standard. This authority is set
forth at 49 U.S.C. 30113. The Secretary
has delegated the authority for
implementing this section to NHTSA.
The Act authorizes the Secretary to
grant a temporary exemption to a
vehicle manufacturer under certain
conditions. The relevant conditions for
this petition require the Secretary to
find:
(1) That ‘‘the exemption would make
the development or field evaluation of
a low-emission motor vehicle easier and
would not unreasonably lower the
safety level of that vehicle;’’ or
(2) that ‘‘compliance with the
standard would prevent the
manufacturer from selling a motor
vehicle with an overall safety level at
least equal to the overall safety level of
nonexempt vehicles.’’ 5
4 The speed condition for each test is specified in
paragraphs S6.1 to S6.3.
5 See 49 U.S.C. 30113.
VerDate Mar<15>2010
15:19 Jun 10, 2014
Jkt 232001
NHTSA established 49 CFR part 555,
Temporary Exemption from Motor
Vehicle Safety and Bumper Standards,
to implement the statutory provisions
concerning temporary exemptions. The
requirements specified in 49 CFR 555.5
state that the petitioner must set forth
the basis of the application by providing
the required information under part
555.6, and the reasons why the
exemption would be in the public
interest and consistent with the
objectives of 49 U.S.C. Chapter 301.
A petition under the basis that the
exemption would make easier the
development or field evaluation of a
low-emission motor vehicle must
include the information specified in 49
CFR 555.6(c). The main requirements of
that section include: (1) Substantiation
that the vehicle is a low-emission
vehicle; (2) documentation establishing
that a temporary exemption would not
unreasonably degrade the safety of a
vehicle; (3) substantiation that a
temporary exemption would facilitate
the development or field evaluation of
the vehicle; and (4) a statement of
whether the petitioner intends to
conform to the standard at the end of
the exemption period.
A petition under the basis that
compliance with the standard would
prevent the manufacturer from selling a
motor vehicle with an overall safety
level at least equal to the overall safety
level of nonexempt vehicles must
include the information specified in 49
CFR 555.6(d). The main requirements of
that section include: (1) A detailed
description of how the motor vehicle
differs from one that conforms with the
standard; (2) a detailed description of
any safety features that are offered as
standard equipment that are not
required by an FMVSS; (3) the results of
any tests showing that the vehicle
doesn’t meet the standard but has an
overall level of safety at least equal to
nonexempt vehicles; and (4) a statement
of whether the petitioner intends to
conform to the standard at the end of
the exemption period.
III. Overview of Petition
In accordance with 49 U.S.C. 30113
and the procedures in 49 CFR part 555,
Toyota Motor North America, Inc.
(Toyota) submitted a petition asking the
agency for a temporary exemption from
the electrical safety requirements in
paragraph S5.3 of FMVSS No. 305. They
state that they plan to manufacture an
FCV model and that certain aspects of
their FCV design prevent it from
meeting the requirements in S5.3 of
FMVSS No. 305.
As described above, the requirements
of paragraph S5.3 state that (after certain
PO 00000
Frm 00149
Fmt 4703
Sfmt 4703
specified crash tests) a vehicle must
maintain an electrical isolation of 500
ohms/volt for AC high voltage sources
(and DC high voltage sources without
electrical isolation monitoring) or 100
ohms/volt for DC high voltage sources
with electrical isolation monitoring.
Vehicles subject to FMVSS No. 305
must meet these requirements when
tested under any speed up to a
maximum speed of 48, 54, or 80 km/h
(depending on the particular crash test).
Toyota states in its petition that its
vehicle will be able to meet the
requirements of paragraph S5.3 of
FMVSS No. 305 under some, but not all,
of the specified test speeds. The
company states that under higher
speeds (e.g., speeds similar to when an
air bag would deploy), an automatic
disconnect mechanism activates to
ensure that the high voltage components
will meet the requirements of paragraph
S5.3. However, Toyota states that the
automatic disconnect mechanism in its
FCVs will not be triggered in impacts at
relatively low speeds. Toyota believes it
would not be appropriate to equip FCVs
with sensors that would trigger the
automatic disconnect mechanism
following minor impacts (such as
parking lot collisions or curb contacts),
since it is not possible to drive the
vehicle after the system is disconnected.
Toyota states that its FCV would be
unable to meet the requirements of
paragraph S5.3 in such low speed crash
conditions where the automatic
disconnect mechanism is not triggered.6
Toyota applies for this exemption
under two alternative bases.7 First,
Toyota states that this exemption would
make the development or field
evaluation of a low-emission motor
vehicle easier and would not
unreasonably lower the safety level of
the vehicle. Second, Toyota believes
that compliance with FMVSS No. 305
would prevent it from selling a motor
vehicle with an overall safety level at
least equal to the overall safety level of
non-exempt vehicles. Toyota requests
the exemption (under either basis) for 2
years and has stated that it would not
produce more than 2,500 exempted
FCVs within any 12-month period
during the exemption.
In support of its first basis (lowemission vehicle) Toyota states that its
FCV qualifies as a low-emission vehicle
because its FCV will not emit
particulate matter. Further, Toyota
states that the FCV’s noncompliance
6 Additional information is available in Toyota’s
petition. The petition is available in the docket
referenced at the beginning of this document.
7 To view the application, go to https://
www.regulations.gov and enter the docket number
set forth in the heading of this document.
E:\FR\FM\11JNN1.SGM
11JNN1
Federal Register / Vol. 79, No. 112 / Wednesday, June 11, 2014 / Notices
with paragraph S5.3 of FMVSS No. 305
would not unreasonably degrade the
safety of the vehicle because the vehicle
has additional safety features designed
to protect vehicle occupants and first
responders in the event of a crash. First,
Toyota equipped the FCV high voltage
sources with physical barriers that they
believe would prevent any direct
physical contact with live voltage
sources after the crash. Second, Toyota
ensured that all physical barriers would
be grounded to the chassis with a
grounding resistance of less than 0.1
ohms. The company states that this
would protect against any indirect
contact with high voltage sources.
Finally, Toyota states that the high
voltage sources would continue to
maintain an electrical isolation of 100
ohms/volt. Through the combination of
these three attributes, Toyota believes
that the noncompliance with paragraph
S5.3 would not unreasonably degrade
the safety of its FCV.
In support of the second basis (overall
safety is at least equal to a nonexempt
vehicle), Toyota states that its FCV
would not meet the current
requirements of FMVSS No. 305 in low
speed crashes where the automatic
disconnect does not activate and Toyota
would not be able to sell the vehicle in
the United States. However, due to the
additional safety features that the
company plans to incorporate into its
FCVs (i.e., physical barrier + grounding
of the physical barriers to the chassis +
maintaining electrical isolation of 100
ohms/volt), Toyota believes that their
FCV maintains a level of safety that is
at least equivalent to a vehicle
complying with FMVSS No. 305. In
support of this contention, Toyota cites
their belief that their FCV would
comply with the relevant European
standard (ECE R.100) and Global
Technical Regulation (GTR) No. 13
which allow manufacturers to ensure
electrical safety through methods such
as encasing high voltage sources in a
physical barrier.
ehiers on DSK2VPTVN1PROD with NOTICES
IV. Completeness and Comment Period
Upon receiving a petition, NHTSA
conducts an initial review of the
petition with respect to whether the
petition is complete and whether the
petitioner appears to be eligible to apply
for the requested exemption. The agency
has tentatively concluded that the
petition from Toyota is complete and
that Toyota is eligible to apply for a
temporary exemption. The agency has
not made any judgment on the merits of
the application, and is placing a nonconfidential copy of the petition in the
docket.
VerDate Mar<15>2010
15:19 Jun 10, 2014
Jkt 232001
The agency seeks comment from the
public on the merits of Toyota’s
application for a temporary exemption
from the electrical safety requirements
in paragraph S5.3 of FMVSS No. 305.
We are providing a 30-day comment
period. After considering public
comments and other available
information, we will publish a notice of
final action on the application in the
Federal Register.
Dated: May 29, 2014.
Claude H. Harris,
Acting Associate Administrator, for
Rulemaking.
[FR Doc. 2014–13540 Filed 6–10–14; 8:45 am]
BILLING CODE 4910–59–P
DEPARTMENT OF THE TREASURY
Submission for OMB Review;
Comment Request
The Department of the Treasury will
submit the following information
collection requests to the Office of
Management and Budget (OMB) for
review and clearance in accordance
with the Paperwork Reduction Act of
1995, Public Law 104–13, on or after the
date of publication of this notice.
DATES: Comments should be received on
or before July 11, 2014 to be assured of
consideration.
ADDRESSES: Send comments regarding
the burden estimate, or any other aspect
of the information collection, including
suggestions for reducing the burden, to
(1) Office of Information and Regulatory
Affairs, Office of Management and
Budget, Attention: Desk Officer for
Treasury, New Executive Office
Building, Room 10235, Washington, DC
20503, or email at OIRA_Submission@
OMB.EOP.gov and (2) Treasury PRA
Clearance Officer, 1750 Pennsylvania
Ave. NW., Suite 8141, Washington, DC
20220, or email at PRA@treasury.gov.
FOR FURTHER INFORMATION CONTACT:
Copies of the submission(s) may be
obtained by emailing PRA@treasury.gov,
calling (202) 622–1295, or viewing the
entire information collection request at
www.reginfo.gov.
Financial Crimes Enforcement Network
(FinCEN)
OMB Number: 1506–0012.
Type of Review: Revision of a
currently approved collection.
Title: Bank Secrecy Act Designation of
Exempt Person (DOEP) Report.
Form: Form 110.
Abstract: The Bank Secrecy Act and
its implementing regulations require
banks to file currency transaction
Frm 00150
reports (CTRs) on transactions in
currency of more than $10,000. The
regulations also permit a bank to exempt
certain persons from currency
transaction reporting in accordance with
31 CFR 1020.315.
Banks are the only type of financial
institutions that may exempt customers
from CTR filing requirements. The term
‘‘bank’’ is defined in 31 CFR
1010.100(d) and includes savings and
loan associations, thrift institutions, and
credit unions. A bank that wishes to
designate a customer as an exempt
person must file FinCEN Form 110.
Affected Public: Businesses or other
for-profit organizations; Not-for-profit
institutions.
Estimated Annual Burden Hours:
31,450.
Brenda Simms,
Treasury PRA Clearance Officer.
[FR Doc. 2014–13581 Filed 6–10–14; 8:45 am]
BILLING CODE 4810–02–P
June 6, 2014.
PO 00000
33641
Fmt 4703
Sfmt 4703
DEPARTMENT OF THE TREASURY
Survey of Foreign Ownership of U.S.
Securities as of June 30, 2014
Departmental Offices,
Department of the Treasury.
ACTION: Notice of reporting
requirements.
AGENCY:
By this Notice, the
Department of the Treasury is informing
the public that it is conducting a
mandatory survey of foreign ownership
of U.S. securities as of June 30, 2014.
This mandatory survey is conducted
under the authority of the International
Investment and Trade in Services
Survey Act (22 U.S.C. 3101 et seq.) This
Notice constitutes legal notification to
all United States persons (defined
below) who meet the reporting
requirements set forth in this Notice that
they must respond to, and comply with,
this survey. Additional copies of the
reporting forms SHL (2014) and
instructions may be printed from the
Internet at: https://www.treasury.gov/
resource-center/data-chart-center/tic/
Pages/forms-sh.aspx.
Definition: A U.S. person is any
individual, branch, partnership,
associated group, association, estate,
trust, corporation, or other organization
(whether or not organized under the
laws of any State), and any government
(including a foreign government, the
United States Government, a State or
local government, and any agency,
corporation, financial institution, or
other entity or instrumentality thereof,
including a government-sponsored
agency), who resides in the United
SUMMARY:
E:\FR\FM\11JNN1.SGM
11JNN1
Agencies
[Federal Register Volume 79, Number 112 (Wednesday, June 11, 2014)]
[Notices]
[Pages 33639-33641]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-13540]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
National Highway Traffic Safety Administration
[Docket No. NHTSA-2014-0068]
Toyota Motor North America, Inc.; Receipt of Petition for
Temporary Exemption From an Electrical Safety Requirement of FMVSS No.
305
AGENCY: National Highway Traffic Safety Administration (NHTSA),
Department of Transportation (DOT).
ACTION: Notice of receipt of a petition for a temporary exemption from
a provision of Federal Motor Vehicle Safety Standard (FMVSS) No. 305,
Electric-powered vehicles: electrolyte spillage and electrical shock
protection.
-----------------------------------------------------------------------
SUMMARY: In accordance with the procedures in 49 CFR part 555, Toyota
Motor North America, Inc. (Toyota) has petitioned the agency for a
temporary exemption from one requirement of FMVSS No. 305. That portion
of FMVSS No. 305 requires manufacturers to maintain a certain level of
electrical isolation (or reduce the voltage below specified levels) of
high voltage electrical components of an electric vehicle (EV) in the
event of a crash in order to protect the vehicle's occupants and first
responders. Toyota states that a forthcoming fuel cell vehicle (FCV)
model cannot meet this requirement due to certain design
characteristics of their FCVs. Instead, Toyota states that it is using
alternative strategies to help ensure that occupants and first
responders are protected in the event of a crash. NHTSA has made no
judgment on the merits of the application. This notice of receipt of an
application for a temporary exemption is published in accordance with
statutory and administrative provisions.
DATES: You should submit your comments not later than July 11, 2014.
FOR FURTHER INFORMATION CONTACT: Jesse Chang, Office of the Chief
Counsel, NCC-112, National Highway Traffic Safety Administration, 1200
New Jersey Avenue SE., Washington, DC 20590. Telephone: (202) 366-2992;
Fax: (202) 366-3820.
ADDRESSES: We invite you to submit comments on the application
described above. You may submit comments identified by docket number in
the heading of this notice by any of the following methods:
Fax: 1-202-493-2251.
Mail: U.S. Department of Transportation, Docket
Operations, M-30, Room W12-140, 1200 New Jersey Avenue SE., Washington,
DC 20590.
Hand Delivery: 1200 New Jersey Avenue SE., West Building
Ground Floor, Room W12-140, Washington, DC, between 9 a.m. and 5 p.m.,
Monday through Friday, except Federal Holidays.
Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the online instructions for submitting
comments.
Instructions: All submissions must include the agency name and
docket number. Note that all comments received will be posted without
change to https://www.regulations.gov, including any personal
information provided. Please see the Privacy Act discussion below. We
will consider all comments received before the close of business on the
comment closing date indicated above. To the extent possible, we will
also consider comments filed after the closing date.
Docket: For access to the docket to read background documents or
comments received, go to https://www.regulations.gov at any time or to
1200 New Jersey Avenue SE., West Building Ground Floor, Room W12-140,
Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday,
except Federal Holidays. Telephone: (202) 366-9826.
Privacy Act: Anyone is able to search the electronic form of all
comments received into any of our dockets by the name of the individual
submitting the comment (or signing the comment, if submitted on behalf
of an association, business, labor union, etc.). You may review DOT's
complete Privacy Act Statement in the Federal Register published on
April 11, 2000 (65 FR 19476) or you may visit https://www.dot.gov/privacy.html.
Confidential Business Information: If you wish to submit any
information under a claim of confidentiality, you should submit three
copies of your complete submission, including the information you claim
to be confidential business information, to the Chief Counsel, NHTSA,
at the address given under FOR FURTHER INFORMATION CONTACT. In
addition, you should submit two copies, from which you have deleted the
claimed confidential business information, to Docket Management at the
address given above. When you send a comment containing information
claimed to be confidential business information, you should include a
cover letter setting forth the information specified in our
confidential business information regulation (49 CFR part 512).
SUPPLEMENTARY INFORMATION:
I. The Electrical Safety Requirement in FMVSS No. 305 and its Purpose
In 2000, the agency created Federal Motor Vehicle Safety Standard
(FMVSS) No. 305 to help facilitate the safe introduction of EVs into
the marketplace.\1\ While FMVSS No. 305 addresses a number of safety
concerns relevant to EVs (e.g., battery retention and electrolyte
spillage), paragraph S5.3 of the standard, at issue here, requires EVs
to maintain electrical isolation of various major electrical components
(e.g., components related to the vehicle's propulsion) after specified
crash tests. The purpose of the requirements in S5.3 is to reduce the
risk of high voltage electrical shock to the vehicle's occupants and
the first responders in the event of a crash.\2\
---------------------------------------------------------------------------
\1\ See 65 FR 57980 (September 27, 2000).
\2\ See id.
---------------------------------------------------------------------------
NHTSA published its most recent major update to the S5.3
requirements in 2010.\3\ In this update, NHTSA expanded the types of
electrical components that would be covered by the requirement and the
options available for complying with the requirement. Namely, the
agency expanded the coverage of the standard to include other high
voltage
[[Page 33640]]
components of the EV beyond the propulsion battery. Further, the
updated requirements recognize the different safety implications
between Alternating Current (AC) and Direct Current (DC) by
establishing different requirements for each type of electrical
component. FMVSS No. 305 further specifies various crash test
conditions under which a vehicle is required to meet the aforementioned
requirements. Depending on the particular crash scenario (e.g., frontal
barrier, rear moving barrier, and side moving deformable barrier), the
tests can be conducted at any speed up to a maximum speed of 48, 80, or
54 km/h, respectively.\4\
---------------------------------------------------------------------------
\3\ See 75 FR 33515 (June 14, 2010). NHTSA also answered
petitions for reconsideration on this final rule on July 29, 2011
dealing with clarifying the definitions and test procedures of the
June 14, 2010 final rule. See 76 FR 45436.
\4\ The speed condition for each test is specified in paragraphs
S6.1 to S6.3.
---------------------------------------------------------------------------
The subject of Toyota's petition is these electrical safety
requirements in paragraph S5.3 of FMVSS No. 305. Toyota states in its
petition that certain design aspects of their Fuel Cell Vehicles (FCVs)
preclude the vehicle from meeting the electrical safety requirements in
paragraph S5.3 of FMVSS No. 305. However, Toyota states that it will
implement various alternative strategies to ensure that the vehicle
occupants and first responders are protected from an undue risk of high
voltage electrical shock after a crash. Section III below describes
Toyota's petition in more detail.
II. Statutory Authority for Temporary Exemptions
The National Traffic and Motor Vehicle Safety Act (Safety Act),
codified at 49 U.S.C. Chapter 301, provides the Secretary of
Transportation authority to exempt, on a temporary basis and under
specified circumstances, motor vehicles from a motor vehicle safety
standard or bumper standard. This authority is set forth at 49 U.S.C.
30113. The Secretary has delegated the authority for implementing this
section to NHTSA.
The Act authorizes the Secretary to grant a temporary exemption to
a vehicle manufacturer under certain conditions. The relevant
conditions for this petition require the Secretary to find:
(1) That ``the exemption would make the development or field
evaluation of a low-emission motor vehicle easier and would not
unreasonably lower the safety level of that vehicle;'' or
(2) that ``compliance with the standard would prevent the
manufacturer from selling a motor vehicle with an overall safety level
at least equal to the overall safety level of nonexempt vehicles.'' \5\
---------------------------------------------------------------------------
\5\ See 49 U.S.C. 30113.
---------------------------------------------------------------------------
NHTSA established 49 CFR part 555, Temporary Exemption from Motor
Vehicle Safety and Bumper Standards, to implement the statutory
provisions concerning temporary exemptions. The requirements specified
in 49 CFR 555.5 state that the petitioner must set forth the basis of
the application by providing the required information under part 555.6,
and the reasons why the exemption would be in the public interest and
consistent with the objectives of 49 U.S.C. Chapter 301.
A petition under the basis that the exemption would make easier the
development or field evaluation of a low-emission motor vehicle must
include the information specified in 49 CFR 555.6(c). The main
requirements of that section include: (1) Substantiation that the
vehicle is a low-emission vehicle; (2) documentation establishing that
a temporary exemption would not unreasonably degrade the safety of a
vehicle; (3) substantiation that a temporary exemption would facilitate
the development or field evaluation of the vehicle; and (4) a statement
of whether the petitioner intends to conform to the standard at the end
of the exemption period.
A petition under the basis that compliance with the standard would
prevent the manufacturer from selling a motor vehicle with an overall
safety level at least equal to the overall safety level of nonexempt
vehicles must include the information specified in 49 CFR 555.6(d). The
main requirements of that section include: (1) A detailed description
of how the motor vehicle differs from one that conforms with the
standard; (2) a detailed description of any safety features that are
offered as standard equipment that are not required by an FMVSS; (3)
the results of any tests showing that the vehicle doesn't meet the
standard but has an overall level of safety at least equal to nonexempt
vehicles; and (4) a statement of whether the petitioner intends to
conform to the standard at the end of the exemption period.
III. Overview of Petition
In accordance with 49 U.S.C. 30113 and the procedures in 49 CFR
part 555, Toyota Motor North America, Inc. (Toyota) submitted a
petition asking the agency for a temporary exemption from the
electrical safety requirements in paragraph S5.3 of FMVSS No. 305. They
state that they plan to manufacture an FCV model and that certain
aspects of their FCV design prevent it from meeting the requirements in
S5.3 of FMVSS No. 305.
As described above, the requirements of paragraph S5.3 state that
(after certain specified crash tests) a vehicle must maintain an
electrical isolation of 500 ohms/volt for AC high voltage sources (and
DC high voltage sources without electrical isolation monitoring) or 100
ohms/volt for DC high voltage sources with electrical isolation
monitoring. Vehicles subject to FMVSS No. 305 must meet these
requirements when tested under any speed up to a maximum speed of 48,
54, or 80 km/h (depending on the particular crash test).
Toyota states in its petition that its vehicle will be able to meet
the requirements of paragraph S5.3 of FMVSS No. 305 under some, but not
all, of the specified test speeds. The company states that under higher
speeds (e.g., speeds similar to when an air bag would deploy), an
automatic disconnect mechanism activates to ensure that the high
voltage components will meet the requirements of paragraph S5.3.
However, Toyota states that the automatic disconnect mechanism in its
FCVs will not be triggered in impacts at relatively low speeds. Toyota
believes it would not be appropriate to equip FCVs with sensors that
would trigger the automatic disconnect mechanism following minor
impacts (such as parking lot collisions or curb contacts), since it is
not possible to drive the vehicle after the system is disconnected.
Toyota states that its FCV would be unable to meet the requirements of
paragraph S5.3 in such low speed crash conditions where the automatic
disconnect mechanism is not triggered.\6\
---------------------------------------------------------------------------
\6\ Additional information is available in Toyota's petition.
The petition is available in the docket referenced at the beginning
of this document.
---------------------------------------------------------------------------
Toyota applies for this exemption under two alternative bases.\7\
First, Toyota states that this exemption would make the development or
field evaluation of a low-emission motor vehicle easier and would not
unreasonably lower the safety level of the vehicle. Second, Toyota
believes that compliance with FMVSS No. 305 would prevent it from
selling a motor vehicle with an overall safety level at least equal to
the overall safety level of non-exempt vehicles. Toyota requests the
exemption (under either basis) for 2 years and has stated that it would
not produce more than 2,500 exempted FCVs within any 12-month period
during the exemption.
---------------------------------------------------------------------------
\7\ To view the application, go to https://www.regulations.gov
and enter the docket number set forth in the heading of this
document.
---------------------------------------------------------------------------
In support of its first basis (low-emission vehicle) Toyota states
that its FCV qualifies as a low-emission vehicle because its FCV will
not emit particulate matter. Further, Toyota states that the FCV's
noncompliance
[[Page 33641]]
with paragraph S5.3 of FMVSS No. 305 would not unreasonably degrade the
safety of the vehicle because the vehicle has additional safety
features designed to protect vehicle occupants and first responders in
the event of a crash. First, Toyota equipped the FCV high voltage
sources with physical barriers that they believe would prevent any
direct physical contact with live voltage sources after the crash.
Second, Toyota ensured that all physical barriers would be grounded to
the chassis with a grounding resistance of less than 0.1 ohms. The
company states that this would protect against any indirect contact
with high voltage sources. Finally, Toyota states that the high voltage
sources would continue to maintain an electrical isolation of 100 ohms/
volt. Through the combination of these three attributes, Toyota
believes that the noncompliance with paragraph S5.3 would not
unreasonably degrade the safety of its FCV.
In support of the second basis (overall safety is at least equal to
a nonexempt vehicle), Toyota states that its FCV would not meet the
current requirements of FMVSS No. 305 in low speed crashes where the
automatic disconnect does not activate and Toyota would not be able to
sell the vehicle in the United States. However, due to the additional
safety features that the company plans to incorporate into its FCVs
(i.e., physical barrier + grounding of the physical barriers to the
chassis + maintaining electrical isolation of 100 ohms/volt), Toyota
believes that their FCV maintains a level of safety that is at least
equivalent to a vehicle complying with FMVSS No. 305. In support of
this contention, Toyota cites their belief that their FCV would comply
with the relevant European standard (ECE R.100) and Global Technical
Regulation (GTR) No. 13 which allow manufacturers to ensure electrical
safety through methods such as encasing high voltage sources in a
physical barrier.
IV. Completeness and Comment Period
Upon receiving a petition, NHTSA conducts an initial review of the
petition with respect to whether the petition is complete and whether
the petitioner appears to be eligible to apply for the requested
exemption. The agency has tentatively concluded that the petition from
Toyota is complete and that Toyota is eligible to apply for a temporary
exemption. The agency has not made any judgment on the merits of the
application, and is placing a non-confidential copy of the petition in
the docket.
The agency seeks comment from the public on the merits of Toyota's
application for a temporary exemption from the electrical safety
requirements in paragraph S5.3 of FMVSS No. 305. We are providing a 30-
day comment period. After considering public comments and other
available information, we will publish a notice of final action on the
application in the Federal Register.
Dated: May 29, 2014.
Claude H. Harris,
Acting Associate Administrator, for Rulemaking.
[FR Doc. 2014-13540 Filed 6-10-14; 8:45 am]
BILLING CODE 4910-59-P