Reports, Forms, and Record Keeping Requirements, 25984-25986 [2014-10330]
Download as PDF
25984
Federal Register / Vol. 79, No. 87 / Tuesday, May 6, 2014 / Notices
DEPARTMENT OF TRANSPORTATION
Federal Transit Administration
[Docket No. FTA–2014–0002]
Notice of Buy America Waiver for a
Cross-Connect Cabinet
AGENCY:
Federal Transit Administration,
DOT.
ACTION:
Notice of Buy America Waiver.
In response to the City of
Cincinnati (Cincinnati) request for a Buy
America waiver for a cross-connect
cabinet, the Federal Transit
Administration (FTA) hereby waives its
Buy America requirements for the crossconnect cabinet needed for a Cincinnati
Bell utility relocation associated with
the Cincinnati Streetcar project. This
waiver is limited to a single
procurement for the cross-connect
cabinet for the Cincinnati Streetcar
project.
SUMMARY:
sroberts on DSK5SPTVN1PROD with NOTICES
FOR FURTHER INFORMATION CONTACT:
Mary J. Lee, FTA Attorney-Advisor, at
(202) 366–0985 or mary.j.lee@dot.gov.
SUPPLEMENTARY INFORMATION: The
purpose of this notice is to announce
that the Federal Transit Administration
(FTA) has granted a non-availability
waiver for the procurement of a crossconnect cabinet that will be used in a
utility relocation performed by
Cincinnati Bell. This utility relocation
will be performed in connection with
the Cincinnati Streetcar project, which
is an FTA-funded project.
With certain exceptions, FTA’s Buy
America requirements prevent FTA
from obligating an amount that may be
appropriated to carry out its program for
a project unless ‘‘the steel, iron, and
manufactured goods used in the project
are produced in the United States.’’ 49
U.S.C. 5323(j)(1). A manufactured
product is considered produced in the
United States if: (1) All of the
manufacturing processes for the product
take place in the United States; and (2)
all of the components of the product are
of U.S. origin. A component is
considered of U.S. origin if it is
manufactured in the United States,
regardless of the origin of its
subcomponents. 49 CFR 661.5(d). If,
however, FTA determines that ‘‘the
steel, iron, and goods produced in the
United States are not produced in a
sufficient and reasonably available
amount or are not of a satisfactory
quality,’’ then FTA may issue a waiver
(non-availability waiver). 49 U.S.C.
5323(j)(2)(B); 49 CFR 661.7(c).
On September 30, 2013, the City of
Cincinnati (Cincinnati) formally
requested a non-availability waiver for
VerDate Mar<15>2010
17:34 May 05, 2014
Jkt 232001
the procurement of one cross-connect
cabinet.1 In its request, Cincinnati stated
that the only known cross-connect
cabinet that complies with Cincinnati
Bell’s network specifications and
service protocols is the Tyco Electronics
(TE) NGXC pad mount cross-connect
cabinet. At this time, deviations from
the use of this particular cross-connect
cabinet would result in impacts that
would cascade down from the
installation, maintenance, and
emergency repair aspects, to operational
impacts due to hardware
incompatibility.
On October 17, 2013, Cincinnati
alerted FTA that Cincinnati Bell had
installed the cross-connect cabinet in
order to comply with its scheduling
demands. Unfortunately, because almost
all FTA employees were furloughed
during this time due to a partial
government shutdown, Cincinnati was
unable to consult with FTA on how to
proceed.
On February 18, 2014, FTA published
a notice to request comments on the
Cincinnati’s waiver request for the
cross-connect cabinet. The comment
period closed on March 4, 2014. FTA
did not receive any comments to the
docket, docket number FTA–2014–0002.
Based upon Cincinnati Bell’s
assertions that it is unable to procure a
U.S.-manufactured cross-connect
cabinet at this time that is configured for
Cincinnati Bell’s telecommunications
network and meets Cincinnati Bell’s
engineering standards, FTA hereby
waives its Buy America requirement for
manufactured products under 49 CFR
661.5(d) for the cross-connect cabinet.
This waiver is limited to a single
procurement for the cross-connect
cabinet for the Cincinnati Streetcar
project.
Dana C. Nifosi,
Deputy Chief Counsel.
[FR Doc. 2014–10305 Filed 5–5–14; 8:45 am]
BILLING CODE 4910–57–P
1 This request was the result of several informal
communications between FTA, Cincinnati, and
Cincinnati Bell to work through all of the Buy
America issues. The availability of a domestic
cross-connect cabinet that meets Cincinnati Bell’s
specifications in order to conform to its
telecommunications network is the only remaining
issue.
PO 00000
Frm 00171
Fmt 4703
Sfmt 4703
DEPARTMENT OF TRANSPORTATION
National Highway Traffic Safety
Administration
[U.S. DOT Docket Number NHTSA–2014–
0041]
Reports, Forms, and Record Keeping
Requirements
National Highway Traffic
Safety Administration (NHTSA),
Department of Transportation (DOT).
ACTION: Request for public comment on
an extension of a currently approved
collection.
AGENCY:
Before a Federal agency can
collect certain information from the
public, it must receive approval from
the Office of Management and Budget
(OMB). Under procedures established
by the Paperwork Reduction Act of
1995, before seeking OMB approval,
Federal agencies must solicit public
comment on proposed collections of
information, including extensions and
reinstatement of previously approved
collections.
This document describes one
collection of information for Part 541
and Part 542 for which NHTSA intends
to seek OMB approval.
DATES: Comments must be received on
or before July 7, 2014.
ADDRESSES: Comments must refer to the
docket notice numbers cited at the
beginning of this notice and be
submitted to Docket Management, 1200
New Jersey Avenue SE., West Building
Ground Floor, Room W12–140,
Washington, DC 20590 by any of the
following methods.
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the
instructions for submitting comments.
• Mail: Docket Management Facility;
U.S. Department of Transportation, 1200
New Jersey Avenue SE., West Building
Ground Floor, Room W12–140,
Washington, DC 20590.
• Hand Delivery/Courier: 1200 New
Jersey Avenue SE., West Building
Ground Floor, Room W12–140,
Washington, DC 20590, between 9 a.m.
and 5 p.m., Monday through Friday,
except Federal holidays.
• Fax: (202) 493–2251.
Instructions: For detailed instructions
on submitting comments and additional
information on the rulemaking process,
see the Supplementary Information
section of this document. Note that all
comments received will be posted
without change to https://
www.regulations.gov, including any
personal information provided. Please
see the Privacy Act heading below.
SUMMARY:
E:\FR\FM\06MYN1.SGM
06MYN1
sroberts on DSK5SPTVN1PROD with NOTICES
Federal Register / Vol. 79, No. 87 / Tuesday, May 6, 2014 / Notices
Privacy Act: Anyone is able to search
the electronic form of all comments
received into any of our dockets by the
name of the individual submitting the
comment (or signing the comment, if
submitted on behalf of an association,
business, labor union, etc.). You may
review DOT’s complete Privacy Act
Statement in the Federal Register
published on April 11, 2000 (65FR
19477–78) or you may visit https://
Docket Info.dot.gov.
Docket: For access to the docket to
read background documents or
comments received, go to the street
address listed above. The internet access
to the docket will be at https://
www.regulations.gov. Follow the online
instructions for accessing the dockets.
FOR FURTHER INFORMATION CONTACT:
Complete copies of each request for
collection of information may be
obtained at no charge from Deborah
Mazyck, NHTSA, 1200 New Jersey Ave.
SE., Room W43–443, NVS–131,
Washington, DC 20590. Ms. Mazyck’s
telephone number is (202) 366–4139.
Please identify the relevant collection of
information by referring to its OMB
Control Number.
SUPPLEMENTARY INFORMATION: Under the
Paperwork Reduction Act of 1995,
before an agency submits a proposed
collection of information to OMB for
approval, it must first publish a
document in the Federal Register
providing a 60-day comment period and
otherwise consult with members of the
public and affected agencies concerning
each proposed collection of information.
The OMB has promulgated regulations
describing what must be included in
such a document. Under OMB’s
regulation (at 5 CFR 1320.8(d)), an
agency must ask for public comment on
the following:
(i.) Whether the proposed collection
of information is necessary for the
proper performance of the functions of
the agency, including whether the
information will have practical utility;
(ii.) The accuracy of the agency’s
estimate of the burden of the proposed
collection of information, including the
validity of the methodology and
assumptions used;
(iii.) How to enhance the quality,
utility, and clarity of the information to
be collected and;
(iv.) How to minimize the burden of
the collection of information on those
who are to respond, including the use
of appropriate automated, electronic,
mechanical, or other technological
collection techniques or other forms of
information technology, e.g. permitting
electronic submission of responses.
In compliance with these
requirements, NHTSA asks for public
VerDate Mar<15>2010
17:34 May 05, 2014
Jkt 232001
comments on the following proposed
collections of information:
Title: Consolidated Federal Motor
Vehicle Theft Prevention Standard and
Procedures for Selecting Lines To Be
Covered by the Theft Prevention
Standard for 49 CFR Part 541 and 542
(OMB Clearance Number 2127–0539).
OMB Control Number: 2127–0539.
Affected Public: Vehicle
manufacturers.
Form Number: The collection of this
information uses no standard form.
Requested Expiration Date of
Approval: Three years from approval
date.
Abstract: For Parts 541 and 542.
Part 541
The Motor Vehicle Information and
Cost Savings Act was amended by the
Anti-Car Theft Act of 1992 (Pub. L. 102–
519). The enacted Theft Act requires
specified parts of high-theft vehicle to
be marked with vehicle identification
numbers. In a final rule published on
April 6, 2004, the Federal Motor Vehicle
Theft Prevention Standard was
extended to include all passenger cars
and multipurpose passenger vehicles
with a gross vehicle weight rating of
6,000 pounds or less, and to light duty
trucks with major parts that are
interchangeable with a majority of the
covered major parts of multipurpose
passenger vehicles. Each major
component part must be either labeled
or affixed with the VIN and its
replacement component part must be
marked with the DOT symbol, the letter
(R) and the manufacturers’ logo. The
final rule became effective September 1,
2006. Due to expansion of the Federal
Motor Vehicle Theft Prevention
Standard (Part 541), all passenger cars,
and multipurpose passenger vehicles
with a gross vehicle weight rating of
6,000 pounds or less, and light duty
trucks with major parts that are
interchangeable with a majority of the
covered major parts of multipurpose
passenger vehicles, are required to be
parts marked.
Part 542
Manufacturers of light duty trucks
must identify new model introductions
that are likely to be high-theft lines as
defined in 49 U.S.C. § 33104. In 1984,
Congress enacted the Motor Vehicle
Theft Law Enforcement Act (the 1984
Theft Act). As a means to prevent the
theft of motor vehicles for their parts,
the 1984 Theft Act required vehicle
manufacturers to mark the major parts
of ‘‘high-theft’’ passenger cars and the
major replacement parts for those cars.
The Anti Car Theft Act of 1992 (ACTA)
amended the 1984 Theft Act to extend
PO 00000
Frm 00172
Fmt 4703
Sfmt 4703
25985
its provisions to multipurpose passenger
vehicles (MPVs) and light duty trucks
(LDTs).
The 1984 Theft Act, as amended by
ACTA, requires NHTSA to promulgate a
theft prevention standard for the
designation of high-theft vehicle lines.
The specific lines are to be selected by
agreement between the manufacturer
and the agency. If there is a
disagreement of the selection, the
statute states that the agency shall select
such lines and parts, after notice to the
manufacturer and an opportunity for
written comment. NHTSA’s procedures
for selecting high theft vehicle lines are
contained in 49 CFR Part 542.
In a final rule published on April 6,
2004, the Federal Motor Vehicle Theft
Prevention Standard was extended to
include all passenger cars and
multipurpose passenger vehicles with a
gross vehicle weight rating of 6,000
pounds or less, regardless of whether
they were likely to be high or low theft,
and to light duty trucks with major parts
that are interchangeable with a majority
of the covered major parts of
multipurpose passenger vehicles. The
final rule became effective September 1,
2006.
As a result of this amendment,
determination of high theft status is
required only for LDTs manufactured on
or after that date. There are seven
vehicle manufacturers who produce
LDTs. Generally, these manufacturers
would not introduce more than one new
LDT line in any year. NHTSA estimates
the maximum number of responses to be
two.
Estimated Total Cost Burden and
Annual Burden Hour
Part 541
To meet the Theft Prevention
Standard, the agency estimates that the
time to number and affix 14 labels to
each vehicle is approximately 2
minutes. Approximately 8 million
vehicles will be covered. NHTSA
estimates the hourly burden for labeling
8 million motor vehicles would be
266,666 hours (8 million cars × 2
minutes per car/60 minutes in an hour).
The other option is to stamp the
engine and transmission. The agency
estimates that the time to stamp both the
engine and transmission will take
approximately 1 minute. Approximately
8 million vehicles will be covered; the
total burden for stamping is estimated to
total 133,333 hours (8 million cars × 1
minute per car/60 minutes in an hour).
Please note that in this analysis each
vehicle would either have its major
parts labeled or stamped, but not both.
E:\FR\FM\06MYN1.SGM
06MYN1
25986
Federal Register / Vol. 79, No. 87 / Tuesday, May 6, 2014 / Notices
NHTSA will use the highest hour
number in the hour burden estimate.
Each manufacturer of vehicles that are
required to be parts-marked must
submit reports of the target area
locations for the labels or stamping.
NHTSA estimates that the maximum
number of submissions to be 30. The
average time to prepare and submit the
target area submissions will be 20 hours
for each submission at a cost of $60 per
hour. The burden hour for submissions
will be 600 hours (30 submissions × 20
hours) with an annual estimated cost
burden of $36,000.00 ($60.00 × 20 hours
× 30 submissions).
The total burden hours equal 266,666
+ 600 = 267,266. The estimated total
cost associated with the burden hours is
approximately $16,035,960 (267,266 ×
$60.00/hr).
NHTSA assumes that most
manufacturers will use the less
expensive method of labeling the major
parts on vehicles, and not stamp the
VINs onto major parts. NHTSA
estimates that the average cost to label
the 14 parts is $10.24 per vehicle,
broken down into $5.33 for material and
$4.91 for labor. At present, 8 million
motor vehicles annually must have its
major parts marked. At present, the total
annual fleet costs are estimated at
$81,920,000 for label identifiers ($10.24
× 8 million vehicles). NHTSA estimates
the total annual cost of meeting Part 541
will be $81,920,000 (lable) + $36,000
(target area submission) =
$81,956,000.00 (approximately $82
million).
sroberts on DSK5SPTVN1PROD with NOTICES
Part 542
NHTSA estimates that the average
hours per submittal are 45, for a total
annual burden of 90 hours. NHTSA
estimates that the cost associated with
the burden hours is $36.00 per hour, for
a total cost of approximately $3,234.
NHTSA estimates the total annual
cost of meeting Part 542 require no
additional costs to the respondents.
Therefore, NHTSA estimates the
grand total cost for Part 541 and Part
542 will be $81,956,000.00
(approximately $82 million).
Comments are invited on: Whether
the proposed collection of information
is necessary for the proper performance
of the functions of the Department,
including whether the information will
have practical utility; the accuracy of
the Department’s estimate of the burden
of the proposed information collection;
ways to enhance the quality, utility and
clarity of the information to be
collected; and ways to minimize the
burden of the collection of information
on respondents, including the use of
VerDate Mar<15>2010
17:34 May 05, 2014
Jkt 232001
automated collection techniques or
other forms of information technology.
Claude H. Harris,
Acting Associate Administrator for
Rulemaking.
[FR Doc. 2014–10330 Filed 5–5–14; 8:45 am]
BILLING CODE 4910–59–P
DEPARTMENT OF TRANSPORTATION
Pipeline and Hazardous Materials
Safety Administration
[Docket No. PHMSA–2014–0005]
Pipeline Safety: Information Collection
Activities
Notice and request for
comments.
ACTION:
Pipeline and Hazardous
Materials Safety Administration
SUMMARY: On January 29, 2014, in
accordance with the Paperwork
Reduction Act of 1995, the Pipeline and
Hazardous Materials Safety
Administration (PHMSA) published a
notice in the Federal Register notifying
the public of its intent to request an
extension with no change for the
pipeline reporting information
collections identified by Office of
Management and Budget (OMB) control
numbers 2137–0578, 2137–0584, and
2137–0601. In addition, PHMSA also
intends to revise the information
collection identified under OMB control
number 2137–0618 to include the
information currently collected under
OMB control number 2137–0601.
PHMSA received no comments in
response to that notice. PHMSA is
publishing this notice to provide the
public with an additional 30 days to
comment on both the renewal and the
revision of the information collections
referenced above and announce that the
Information Collections will be
submitted to OMB for approval.
DATES: Comments on this notice must be
received by June 5, 2014 to be assured
of consideration.
FOR FURTHER INFORMATION CONTACT:
Angela Dow by telephone at 202–366–
1246, by fax at 202–366–4566, or by
mail at DOT, PHMSA, 1200 New Jersey
Avenue SE., PHP–30, Washington, DC
20590–0001.
ADDRESSES: You may submit comments
identified by the docket number
PHMSA–2014–0005 by any of the
following methods:
• Fax: 1–202–395–5806.
• Mail: Office of Information and
Regulatory Affairs (OIRA), Records
Management Center, Room 10102
AGENCY:
PO 00000
Frm 00173
Fmt 4703
Sfmt 4703
NEOB, 725 17th Street NW.,
Washington, DC 20503,
ATTN: Desk Officer for the U.S.
Department of Transportation\PHMSA.
• Email: Office of Information and
Regulatory Affairs, OMB, at the
following email address:
OIRA_Submission@omb.eop.gov.
Requests for a copy of the Information
Collection should be directed to Angela
Dow by telephone at 202–366–1246, by
fax at 202–366–4566, by email at
Angela.Dow1@dot.gov, or by mail at
U.S. Department of Transportation,
PHMSA, 1200 New Jersey Avenue SE.,
PHP–30, Washington, DC 20590–0001.
SUPPLEMENTARY INFORMATION: Section
1320.8(d), Title 5, Code of Federal
Regulations, requires PHMSA to provide
interested members of the public and
affected agencies an opportunity to
comment on information collection and
recordkeeping requests. This notice
identifies certain information collection
requests that PHMSA will submit to
OMB for renewal. The following
information is provided for each
information collection: (1) Title of the
information collection; (2) OMB control
number; (3) Current expiration date; (4)
Type of request; (5) Abstract of the
information collection activity; (6)
Description of affected public; (7)
Estimate of total annual reporting and
recordkeeping burden; and (8)
Frequency of collection. PHMSA will
request a three-year term of approval for
each information collection activity.
PHMSA requests comments on the
following information collections:
1. Title: Reporting Safety-Related
Conditions on Gas, Hazardous Liquid,
and Carbon Dioxide Pipelines and
Liquefied Natural Gas Facilities.
OMB Control Number: 2137–0578.
Current Expiration Date: 5/31/2014.
Type of Request: Renewal of a
currently approved information
collection.
Abstract: In accordance with 49 CFR
Parts 191 and 195, each pipeline facility
operator (except master meter operators)
must submit to DOT a written report on
any safety-related condition that causes
or has caused a significant change or
restriction in the operation of a pipeline
facility or a condition that is a hazard
to life, property or the environment.
Affected Public: Operators of pipeline
facilities (except master meter
operators).
Annual Reporting and Recordkeeping
Burden:
Estimated number of responses: 142.
Estimated annual burden hours: 852.
Frequency of collection: On occasion.
2. Title: Gas Pipeline Safety Program
Certification and Hazardous Liquid
Pipeline Safety Program Certification.
E:\FR\FM\06MYN1.SGM
06MYN1
Agencies
[Federal Register Volume 79, Number 87 (Tuesday, May 6, 2014)]
[Notices]
[Pages 25984-25986]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-10330]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
National Highway Traffic Safety Administration
[U.S. DOT Docket Number NHTSA-2014-0041]
Reports, Forms, and Record Keeping Requirements
AGENCY: National Highway Traffic Safety Administration (NHTSA),
Department of Transportation (DOT).
ACTION: Request for public comment on an extension of a currently
approved collection.
-----------------------------------------------------------------------
SUMMARY: Before a Federal agency can collect certain information from
the public, it must receive approval from the Office of Management and
Budget (OMB). Under procedures established by the Paperwork Reduction
Act of 1995, before seeking OMB approval, Federal agencies must solicit
public comment on proposed collections of information, including
extensions and reinstatement of previously approved collections.
This document describes one collection of information for Part 541
and Part 542 for which NHTSA intends to seek OMB approval.
DATES: Comments must be received on or before July 7, 2014.
ADDRESSES: Comments must refer to the docket notice numbers cited at
the beginning of this notice and be submitted to Docket Management,
1200 New Jersey Avenue SE., West Building Ground Floor, Room W12-140,
Washington, DC 20590 by any of the following methods.
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the instructions for submitting comments.
Mail: Docket Management Facility; U.S. Department of
Transportation, 1200 New Jersey Avenue SE., West Building Ground Floor,
Room W12-140, Washington, DC 20590.
Hand Delivery/Courier: 1200 New Jersey Avenue SE., West
Building Ground Floor, Room W12-140, Washington, DC 20590, between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
Fax: (202) 493-2251.
Instructions: For detailed instructions on submitting comments and
additional information on the rulemaking process, see the Supplementary
Information section of this document. Note that all comments received
will be posted without change to https://www.regulations.gov, including
any personal information provided. Please see the Privacy Act heading
below.
[[Page 25985]]
Privacy Act: Anyone is able to search the electronic form of all
comments received into any of our dockets by the name of the individual
submitting the comment (or signing the comment, if submitted on behalf
of an association, business, labor union, etc.). You may review DOT's
complete Privacy Act Statement in the Federal Register published on
April 11, 2000 (65FR 19477-78) or you may visit https://Docket
Info.dot.gov.
Docket: For access to the docket to read background documents or
comments received, go to the street address listed above. The internet
access to the docket will be at https://www.regulations.gov. Follow the
online instructions for accessing the dockets.
FOR FURTHER INFORMATION CONTACT: Complete copies of each request for
collection of information may be obtained at no charge from Deborah
Mazyck, NHTSA, 1200 New Jersey Ave. SE., Room W43-443, NVS-131,
Washington, DC 20590. Ms. Mazyck's telephone number is (202) 366-4139.
Please identify the relevant collection of information by referring to
its OMB Control Number.
SUPPLEMENTARY INFORMATION: Under the Paperwork Reduction Act of 1995,
before an agency submits a proposed collection of information to OMB
for approval, it must first publish a document in the Federal Register
providing a 60-day comment period and otherwise consult with members of
the public and affected agencies concerning each proposed collection of
information. The OMB has promulgated regulations describing what must
be included in such a document. Under OMB's regulation (at 5 CFR
1320.8(d)), an agency must ask for public comment on the following:
(i.) Whether the proposed collection of information is necessary
for the proper performance of the functions of the agency, including
whether the information will have practical utility;
(ii.) The accuracy of the agency's estimate of the burden of the
proposed collection of information, including the validity of the
methodology and assumptions used;
(iii.) How to enhance the quality, utility, and clarity of the
information to be collected and;
(iv.) How to minimize the burden of the collection of information
on those who are to respond, including the use of appropriate
automated, electronic, mechanical, or other technological collection
techniques or other forms of information technology, e.g. permitting
electronic submission of responses.
In compliance with these requirements, NHTSA asks for public
comments on the following proposed collections of information:
Title: Consolidated Federal Motor Vehicle Theft Prevention Standard
and Procedures for Selecting Lines To Be Covered by the Theft
Prevention Standard for 49 CFR Part 541 and 542 (OMB Clearance Number
2127-0539).
OMB Control Number: 2127-0539.
Affected Public: Vehicle manufacturers.
Form Number: The collection of this information uses no standard
form.
Requested Expiration Date of Approval: Three years from approval
date.
Abstract: For Parts 541 and 542.
Part 541
The Motor Vehicle Information and Cost Savings Act was amended by
the Anti-Car Theft Act of 1992 (Pub. L. 102-519). The enacted Theft Act
requires specified parts of high-theft vehicle to be marked with
vehicle identification numbers. In a final rule published on April 6,
2004, the Federal Motor Vehicle Theft Prevention Standard was extended
to include all passenger cars and multipurpose passenger vehicles with
a gross vehicle weight rating of 6,000 pounds or less, and to light
duty trucks with major parts that are interchangeable with a majority
of the covered major parts of multipurpose passenger vehicles. Each
major component part must be either labeled or affixed with the VIN and
its replacement component part must be marked with the DOT symbol, the
letter (R) and the manufacturers' logo. The final rule became effective
September 1, 2006. Due to expansion of the Federal Motor Vehicle Theft
Prevention Standard (Part 541), all passenger cars, and multipurpose
passenger vehicles with a gross vehicle weight rating of 6,000 pounds
or less, and light duty trucks with major parts that are
interchangeable with a majority of the covered major parts of
multipurpose passenger vehicles, are required to be parts marked.
Part 542
Manufacturers of light duty trucks must identify new model
introductions that are likely to be high-theft lines as defined in 49
U.S.C. Sec. 33104. In 1984, Congress enacted the Motor Vehicle Theft
Law Enforcement Act (the 1984 Theft Act). As a means to prevent the
theft of motor vehicles for their parts, the 1984 Theft Act required
vehicle manufacturers to mark the major parts of ``high-theft''
passenger cars and the major replacement parts for those cars. The Anti
Car Theft Act of 1992 (ACTA) amended the 1984 Theft Act to extend its
provisions to multipurpose passenger vehicles (MPVs) and light duty
trucks (LDTs).
The 1984 Theft Act, as amended by ACTA, requires NHTSA to
promulgate a theft prevention standard for the designation of high-
theft vehicle lines. The specific lines are to be selected by agreement
between the manufacturer and the agency. If there is a disagreement of
the selection, the statute states that the agency shall select such
lines and parts, after notice to the manufacturer and an opportunity
for written comment. NHTSA's procedures for selecting high theft
vehicle lines are contained in 49 CFR Part 542.
In a final rule published on April 6, 2004, the Federal Motor
Vehicle Theft Prevention Standard was extended to include all passenger
cars and multipurpose passenger vehicles with a gross vehicle weight
rating of 6,000 pounds or less, regardless of whether they were likely
to be high or low theft, and to light duty trucks with major parts that
are interchangeable with a majority of the covered major parts of
multipurpose passenger vehicles. The final rule became effective
September 1, 2006.
As a result of this amendment, determination of high theft status
is required only for LDTs manufactured on or after that date. There are
seven vehicle manufacturers who produce LDTs. Generally, these
manufacturers would not introduce more than one new LDT line in any
year. NHTSA estimates the maximum number of responses to be two.
Estimated Total Cost Burden and Annual Burden Hour
Part 541
To meet the Theft Prevention Standard, the agency estimates that
the time to number and affix 14 labels to each vehicle is approximately
2 minutes. Approximately 8 million vehicles will be covered. NHTSA
estimates the hourly burden for labeling 8 million motor vehicles would
be 266,666 hours (8 million cars x 2 minutes per car/60 minutes in an
hour).
The other option is to stamp the engine and transmission. The
agency estimates that the time to stamp both the engine and
transmission will take approximately 1 minute. Approximately 8 million
vehicles will be covered; the total burden for stamping is estimated to
total 133,333 hours (8 million cars x 1 minute per car/60 minutes in an
hour). Please note that in this analysis each vehicle would either have
its major parts labeled or stamped, but not both.
[[Page 25986]]
NHTSA will use the highest hour number in the hour burden estimate.
Each manufacturer of vehicles that are required to be parts-marked
must submit reports of the target area locations for the labels or
stamping. NHTSA estimates that the maximum number of submissions to be
30. The average time to prepare and submit the target area submissions
will be 20 hours for each submission at a cost of $60 per hour. The
burden hour for submissions will be 600 hours (30 submissions x 20
hours) with an annual estimated cost burden of $36,000.00 ($60.00 x 20
hours x 30 submissions).
The total burden hours equal 266,666 + 600 = 267,266. The estimated
total cost associated with the burden hours is approximately
$16,035,960 (267,266 x $60.00/hr).
NHTSA assumes that most manufacturers will use the less expensive
method of labeling the major parts on vehicles, and not stamp the VINs
onto major parts. NHTSA estimates that the average cost to label the 14
parts is $10.24 per vehicle, broken down into $5.33 for material and
$4.91 for labor. At present, 8 million motor vehicles annually must
have its major parts marked. At present, the total annual fleet costs
are estimated at $81,920,000 for label identifiers ($10.24 x 8 million
vehicles). NHTSA estimates the total annual cost of meeting Part 541
will be $81,920,000 (lable) + $36,000 (target area submission) =
$81,956,000.00 (approximately $82 million).
Part 542
NHTSA estimates that the average hours per submittal are 45, for a
total annual burden of 90 hours. NHTSA estimates that the cost
associated with the burden hours is $36.00 per hour, for a total cost
of approximately $3,234.
NHTSA estimates the total annual cost of meeting Part 542 require
no additional costs to the respondents.
Therefore, NHTSA estimates the grand total cost for Part 541 and
Part 542 will be $81,956,000.00 (approximately $82 million).
Comments are invited on: Whether the proposed collection of
information is necessary for the proper performance of the functions of
the Department, including whether the information will have practical
utility; the accuracy of the Department's estimate of the burden of the
proposed information collection; ways to enhance the quality, utility
and clarity of the information to be collected; and ways to minimize
the burden of the collection of information on respondents, including
the use of automated collection techniques or other forms of
information technology.
Claude H. Harris,
Acting Associate Administrator for Rulemaking.
[FR Doc. 2014-10330 Filed 5-5-14; 8:45 am]
BILLING CODE 4910-59-P