MET Laboratories, Inc.; Application for Expansion of Recognition, 25894-25895 [2014-10294]

Download as PDF 25894 Federal Register / Vol. 79, No. 87 / Tuesday, May 6, 2014 / Notices The investigation revealed that criteria (a)(2)(A)(I.B.) (Sales or production, or both, did not decline) and (a)(2)(B)(II.B.) (shift in production to a foreign country) have not been met. 85,123, Elsevier, Inc., San Diego, California. The investigation revealed that criteria (a)(2)(A)(I.C.) (increased imports) and (a)(2)(B)(II.B.) (shift in production to a foreign country) have not been met. 85,093, Specialty Foods Group, Inc., Chicago, Illinois. 85,109, Sharp Manufacturing Co. of America (SMCA), Memphis, Tennessee. The workers’ firm does not produce an article as required for certification under Section 222 of the Trade Act of 1974. 85,022, Intrepid Potash Inc., Denver, Colorado. 85,119, Hewlett Packard Company, Palo Alto, California. 85,138, ARRIS Group, Inc., State College, Pennsylvania. 85,166, Hartford Fire Insurance Company, Hartford, Connecticut. 85,174, AT&T Corp., Pittsburgh, Pennsylvania. sroberts on DSK5SPTVN1PROD with NOTICES Determinations Terminating Investigations of Petitions for Worker Adjustment Assistance After notice of the petitions was published in the Federal Register and on the Department’s Web site, as required by Section 221 of the Act (19 U.S.C. 2271), the Department initiated investigations of these petitions. The following determinations terminating investigations were issued because the petitioner has requested that the petition be withdrawn. 85,136, Startek USA, Inc. Jonesboro, Alaska. 85,162, Kuehne & Nagel, Inc., Jersey City, New Jersey. 85,162A, Kuehne & Nagel, Inc., Naugatuck, Connecticut. 85,168, ICON Clinical Research, Sugar Land, Texas. I hereby certify that the aforementioned determinations were issued during the period of April 14, 2014 through April 18, 2014. These determinations are available on the Department’s Web site tradeact/taa/taa_ search_form.cfm under the searchable listing of determinations or by calling the Office of Trade Adjustment Assistance toll free at 888–365–6822. Signed at Washington, DC this 24th day of April 2014. Michael W. Jaffe, Certifying Officer, Office of Trade Adjustment Assistance. [FR Doc. 2014–10258 Filed 5–5–14; 8:45 am] BILLING CODE 4510–FN–P VerDate Mar<15>2010 17:34 May 05, 2014 Jkt 232001 DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA–2006–0028] MET Laboratories, Inc.; Application for Expansion of Recognition Occupational Safety and Health Administration (OSHA), Labor. ACTION: Notice. AGENCY: In this notice, OSHA announces the application of MET Laboratories, Inc., for expansion of its recognition as a Nationally Recognized Testing Laboratory (NRTL) under 29 CFR 1910.7, and presents the Agency’s preliminary finding to grant the application. SUMMARY: Submit comments, information, and documents in response to this notice, or requests for an extension of time to make a submission, on or before May 21, 2014. ADDRESSES: Submit comments by any of the following methods: 1. Electronically: Submit comments and attachments electronically at https://www.regulations.gov, which is the Federal eRulemaking Portal. Follow the instructions online for making electronic submissions. 2. Facsimile: If submissions, including attachments, are not longer than 10 pages, commenters may fax them to the OSHA Docket Office at (202) 693–1648. 3. Regular or express mail, hand delivery, or messenger (courier) service: Submit comments, requests, and any attachments to the OSHA Docket Office, Docket No. OSHA–2006–0028, Technical Data Center, U.S. Department of Labor, 200 Constitution Avenue NW., Room N–2625, Washington, DC 20210; telephone: (202) 693–2350 (TTY number: (877) 889–5627). Note that security procedures may result in significant delays in receiving comments and other written materials by regular mail. Contact the OSHA Docket Office for information about security procedures concerning delivery of materials by express delivery, hand delivery, or messenger service. The hours of operation for the OSHA Docket Office are 8:15 a.m.–4:45 p.m., e.t. 4. Instructions: All submissions must include the Agency name and the OSHA docket number (OSHA–2006–0028). OSHA places comments and other materials, including any personal information, in the public docket without revision, and these materials may be available online at https:// www.regulations.gov. Therefore, the DATES: PO 00000 Frm 00081 Fmt 4703 Sfmt 4703 Agency cautions commenters about submitting statements they do not want made available to the public, or submitting comments that contain personal information (either about themselves or others) such as Social Security numbers, birth dates, and medical data. 5. Docket: To read or download submissions or other material in the docket, go to https://www.regulations.gov or the OSHA Docket Office at the address above. All documents in the docket are listed in the https:// www.regulations.gov index; however, some information (e.g., copyrighted material) is not publicly available to read or download through the Web site. All submissions, including copyrighted material, are available for inspection and copying at the OSHA Docket Office. Contact the OSHA Docket Office for assistance in locating docket submissions. 6. Extension of comment period: Submit requests for an extension of the comment period on or before May 21, 2014 to the Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, U.S. Department of Labor, 200 Constitution Avenue NW., Room N–3655, Washington, DC 20210, or by fax to (202) 693–1644. FOR FURTHER INFORMATION CONTACT: Information regarding this notice is available from the following sources: Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office of Communications, U.S. Department of Labor, 200 Constitution Avenue NW., Room N–3647, Washington, DC 20210; telephone: (202) 693–1999; email: Meilinger.francis2@dol.gov. General and technical information: Contact Mr. David W. Johnson, Director, Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, U.S. Department of Labor, 200 Constitution Avenue NW., Room N–3655, Washington, DC 20210; phone: (202) 693–2110 or email: johnson.david.w@dol.gov. SUPPLEMENTARY INFORMATION: I. Notice of the Application for Expansion The Occupational Safety and Health Administration is providing notice that MET Laboratories, Inc. (MET), is applying for expansion of its current recognition as an NRTL. MET requests the addition of one test standard to its NRTL scope of recognition. E:\FR\FM\06MYN1.SGM 06MYN1 Federal Register / Vol. 79, No. 87 / Tuesday, May 6, 2014 / Notices OSHA recognition of an NRTL signifies that the organization meets the requirements specified in Title 29, Code of Federal Regulations, Section 1910.7 (29 CFR 1910.7). Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within its scope of recognition. Each NRTL’s scope of recognition includes the type of products the NRTL may test, with each type specified by its applicable test standard; and the recognized site(s) that has/have the technical capability to perform the product-testing and productcertification activities for test standards within the NRTL’s scope. Recognition is not a delegation or grant of government authority; however, recognition enables employers to use products approved by the NRTL to meet OSHA standards that require product testing and certification. The Agency processes applications by an NRTL for initial recognition, and for an expansion or renewal of this recognition, following requirements in Appendix A to 29 CFR 1910.7. This appendix requires that the Agency publish two notices in the Federal Register in processing an application. In the first notice, OSHA announces the application and provides its preliminary finding. In the second notice, the Agency provides its final decision on the application. These notices set forth the NRTL’s scope of recognition or modifications of that scope. OSHA maintains an informational Web page for each NRTL, including MET, which details the NRTL’s scope of recognition. These pages are available from the OSHA Web site at https://www.osha.gov/ dts/otpca/nrtl/. MET currently has one facility (site) recognized by OSHA for product testing and certification, with its headquarters located at: MET Laboratories, Inc., 914 West Patapsco Avenue, Baltimore, Maryland 21230. A complete list of MET’s scope of recognition is available at https://www.osha.gov/dts/otpca/nrtl/ met.html. sroberts on DSK5SPTVN1PROD with NOTICES II. General Background on the Application and Request MET submitted an application, dated November 13, 2011 (Exhibit 1), to expand its recognition to include one additional test standard. OSHA staff performed a detailed analysis of the application packet and reviewed other pertinent information. OSHA did not perform any on-site reviews in relation to this application. Table 1 below lists appropriate test standards found in MET’s application for expansion for testing and VerDate Mar<15>2010 17:34 May 05, 2014 Jkt 232001 certification of products under the NRTL Program. 25895 proceedings prescribed in Appendix A to 29 CFR 1910.7. OSHA will publish a public notice of this final decision in the Federal Register. TABLE 1—PROPOSED APPROPRIATE TEST STANDARD FOR INCLUSION IN IV. Authority and Signature MET’S NRTL SCOPE OF RECOGNITION Test standard UL 2202 ............. Test standard title Electric Vehicle (EV) Charging System Equipment. III. Preliminary Findings on the Application MET submitted an acceptable application for expansion of its scope of recognition. OSHA’s review of the application file and pertinent documentation indicate that MET can meet the requirements prescribed by 29 CFR 1910.7 for expanding its recognition to include the addition of this one test standard for NRTL testing and certification. This preliminary finding does not constitute an interim or temporary approval of MET’s application and request. OSHA welcomes public comment as to whether MET meets the requirements of 29 CFR 1910.7 for expansion of its recognition as an NRTL. Comments should consist of pertinent written documents and exhibits. Commenters needing more time to comment must submit a request in writing, stating the reasons for the request. Commenters must submit the written request for an extension by the due date for comments. OSHA will limit any extension to 10 days unless the requester justifies a longer period. OSHA may deny a request for an extension if it is not adequately justified. To obtain or review copies of the publicly available information in MET’s application, including pertinent documents (e.g., exhibits) and all submitted comments, contact the Docket Office, Room N– 2625, Occupational Safety and Health Administration, U.S. Department of Labor, at the above address; these materials also are available online at https://www.regulations.gov under Docket No. OSHA–2006–0028. OSHA staff will review all comments to the docket submitted in a timely manner and, after addressing the issues raised by these comments, will recommend to the Assistant Secretary for Occupational Safety and Health whether to grant MET’s application for expansion of its scope of recognition. The Assistant Secretary will make the final decision on granting the application. In making this decision, the Assistant Secretary may undertake other PO 00000 Frm 00082 Fmt 4703 Sfmt 4703 David Michaels, Ph.D., MPH, Assistant Secretary of Labor for Occupational Safety and Health, 200 Constitution Avenue NW., Washington, DC 20210, authorized the preparation of this notice. Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C. 657(g)(2), Secretary of Labor’s Order No. 1–2012 (77 FR 3912, Jan. 25, 2012), and 29 CFR 1910.7. Signed at Washington, DC, on April 30, 2014. David Michaels, Assistant Secretary of Labor for Occupational Safety and Health. [FR Doc. 2014–10294 Filed 5–5–14; 8:45 am] BILLING CODE 4510–26–P MERIT SYSTEMS PROTECTION BOARD Notice of Opportunity To Submit Ideas for Merit Systems Studies AGENCY: Merit Systems Protection Board. ACTION: Notice. The U.S. Merit Systems Protection Board (MSPB or Board) is updating its research agenda and seeks suggestions about possible topics of study. DATES: Submissions are due June 5, 2014. ADDRESSES: Submit ideas by mail to Research Agenda, U.S. Merit Systems Protection Board, Room 520, 1615 M Street NW., Washington, DC 20419; by fax to (202) 653–7211; or by email to research.agenda@mspb.gov. FOR FURTHER INFORMATION CONTACT: John Ford at (202) 254–4499; or James Tsugawa at (202) 254–4506; or email research.agenda@mspb.gov. SUPPLEMENTARY INFORMATION: MSPB conducts studies of the executive branch to ensure that Federal personnel management continues to be implemented consistent with the Merit System Principles and free from Prohibited Personnel Practices. Most of those studies are drawn from a multiyear research agenda that MSPB develops after reviewing suggested topics from the public. For more information about MSPB studies, see www.mspb.gov/studies. The public is invited to submit ideas to be considered for inclusion in MSPB’s research agenda by answering SUMMARY: E:\FR\FM\06MYN1.SGM 06MYN1

Agencies

[Federal Register Volume 79, Number 87 (Tuesday, May 6, 2014)]
[Notices]
[Pages 25894-25895]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-10294]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2006-0028]


MET Laboratories, Inc.; Application for Expansion of Recognition

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: In this notice, OSHA announces the application of MET 
Laboratories, Inc., for expansion of its recognition as a Nationally 
Recognized Testing Laboratory (NRTL) under 29 CFR 1910.7, and presents 
the Agency's preliminary finding to grant the application.

DATES: Submit comments, information, and documents in response to this 
notice, or requests for an extension of time to make a submission, on 
or before May 21, 2014.

ADDRESSES: Submit comments by any of the following methods:
    1. Electronically: Submit comments and attachments electronically 
at https://www.regulations.gov, which is the Federal eRulemaking Portal. 
Follow the instructions online for making electronic submissions.
    2. Facsimile: If submissions, including attachments, are not longer 
than 10 pages, commenters may fax them to the OSHA Docket Office at 
(202) 693-1648.
    3. Regular or express mail, hand delivery, or messenger (courier) 
service: Submit comments, requests, and any attachments to the OSHA 
Docket Office, Docket No. OSHA-2006-0028, Technical Data Center, U.S. 
Department of Labor, 200 Constitution Avenue NW., Room N-2625, 
Washington, DC 20210; telephone: (202) 693-2350 (TTY number: (877) 889-
5627). Note that security procedures may result in significant delays 
in receiving comments and other written materials by regular mail. 
Contact the OSHA Docket Office for information about security 
procedures concerning delivery of materials by express delivery, hand 
delivery, or messenger service. The hours of operation for the OSHA 
Docket Office are 8:15 a.m.-4:45 p.m., e.t.
    4. Instructions: All submissions must include the Agency name and 
the OSHA docket number (OSHA-2006-0028). OSHA places comments and other 
materials, including any personal information, in the public docket 
without revision, and these materials may be available online at https://www.regulations.gov. Therefore, the Agency cautions commenters about 
submitting statements they do not want made available to the public, or 
submitting comments that contain personal information (either about 
themselves or others) such as Social Security numbers, birth dates, and 
medical data.
    5. Docket: To read or download submissions or other material in the 
docket, go to https://www.regulations.gov or the OSHA Docket Office at 
the address above. All documents in the docket are listed in the https://www.regulations.gov index; however, some information (e.g., 
copyrighted material) is not publicly available to read or download 
through the Web site. All submissions, including copyrighted material, 
are available for inspection and copying at the OSHA Docket Office. 
Contact the OSHA Docket Office for assistance in locating docket 
submissions.
    6. Extension of comment period: Submit requests for an extension of 
the comment period on or before May 21, 2014 to the Office of Technical 
Programs and Coordination Activities, Directorate of Technical Support 
and Emergency Management, Occupational Safety and Health 
Administration, U.S. Department of Labor, 200 Constitution Avenue NW., 
Room N-3655, Washington, DC 20210, or by fax to (202) 693-1644.

FOR FURTHER INFORMATION CONTACT: Information regarding this notice is 
available from the following sources:
    Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office 
of Communications, U.S. Department of Labor, 200 Constitution Avenue 
NW., Room N-3647, Washington, DC 20210; telephone: (202) 693-1999; 
email: Meilinger.francis2@dol.gov.
    General and technical information: Contact Mr. David W. Johnson, 
Director, Office of Technical Programs and Coordination Activities, 
Directorate of Technical Support and Emergency Management, Occupational 
Safety and Health Administration, U.S. Department of Labor, 200 
Constitution Avenue NW., Room N-3655, Washington, DC 20210; phone: 
(202) 693-2110 or email: johnson.david.w@dol.gov.

SUPPLEMENTARY INFORMATION: 

I. Notice of the Application for Expansion

    The Occupational Safety and Health Administration is providing 
notice that MET Laboratories, Inc. (MET), is applying for expansion of 
its current recognition as an NRTL. MET requests the addition of one 
test standard to its NRTL scope of recognition.

[[Page 25895]]

    OSHA recognition of an NRTL signifies that the organization meets 
the requirements specified in Title 29, Code of Federal Regulations, 
Section 1910.7 (29 CFR 1910.7). Recognition is an acknowledgment that 
the organization can perform independent safety testing and 
certification of the specific products covered within its scope of 
recognition. Each NRTL's scope of recognition includes the type of 
products the NRTL may test, with each type specified by its applicable 
test standard; and the recognized site(s) that has/have the technical 
capability to perform the product-testing and product-certification 
activities for test standards within the NRTL's scope. Recognition is 
not a delegation or grant of government authority; however, recognition 
enables employers to use products approved by the NRTL to meet OSHA 
standards that require product testing and certification.
    The Agency processes applications by an NRTL for initial 
recognition, and for an expansion or renewal of this recognition, 
following requirements in Appendix A to 29 CFR 1910.7. This appendix 
requires that the Agency publish two notices in the Federal Register in 
processing an application. In the first notice, OSHA announces the 
application and provides its preliminary finding. In the second notice, 
the Agency provides its final decision on the application. These 
notices set forth the NRTL's scope of recognition or modifications of 
that scope. OSHA maintains an informational Web page for each NRTL, 
including MET, which details the NRTL's scope of recognition. These 
pages are available from the OSHA Web site at https://www.osha.gov/dts/otpca/nrtl/.
    MET currently has one facility (site) recognized by OSHA for 
product testing and certification, with its headquarters located at: 
MET Laboratories, Inc., 914 West Patapsco Avenue, Baltimore, Maryland 
21230. A complete list of MET's scope of recognition is available at 
https://www.osha.gov/dts/otpca/nrtl/met.html.

II. General Background on the Application and Request

    MET submitted an application, dated November 13, 2011 (Exhibit 1), 
to expand its recognition to include one additional test standard. OSHA 
staff performed a detailed analysis of the application packet and 
reviewed other pertinent information. OSHA did not perform any on-site 
reviews in relation to this application.
    Table 1 below lists appropriate test standards found in MET's 
application for expansion for testing and certification of products 
under the NRTL Program.

 Table 1--Proposed Appropriate Test Standard for Inclusion in MET's NRTL
                          Scope of Recognition
------------------------------------------------------------------------
               Test standard                     Test standard title
------------------------------------------------------------------------
UL 2202...................................  Electric Vehicle (EV)
                                             Charging System Equipment.
------------------------------------------------------------------------

III. Preliminary Findings on the Application

    MET submitted an acceptable application for expansion of its scope 
of recognition. OSHA's review of the application file and pertinent 
documentation indicate that MET can meet the requirements prescribed by 
29 CFR 1910.7 for expanding its recognition to include the addition of 
this one test standard for NRTL testing and certification. This 
preliminary finding does not constitute an interim or temporary 
approval of MET's application and request.
    OSHA welcomes public comment as to whether MET meets the 
requirements of 29 CFR 1910.7 for expansion of its recognition as an 
NRTL. Comments should consist of pertinent written documents and 
exhibits. Commenters needing more time to comment must submit a request 
in writing, stating the reasons for the request. Commenters must submit 
the written request for an extension by the due date for comments. OSHA 
will limit any extension to 10 days unless the requester justifies a 
longer period. OSHA may deny a request for an extension if it is not 
adequately justified. To obtain or review copies of the publicly 
available information in MET's application, including pertinent 
documents (e.g., exhibits) and all submitted comments, contact the 
Docket Office, Room N-2625, Occupational Safety and Health 
Administration, U.S. Department of Labor, at the above address; these 
materials also are available online at https://www.regulations.gov under 
Docket No. OSHA-2006-0028.
    OSHA staff will review all comments to the docket submitted in a 
timely manner and, after addressing the issues raised by these 
comments, will recommend to the Assistant Secretary for Occupational 
Safety and Health whether to grant MET's application for expansion of 
its scope of recognition. The Assistant Secretary will make the final 
decision on granting the application. In making this decision, the 
Assistant Secretary may undertake other proceedings prescribed in 
Appendix A to 29 CFR 1910.7. OSHA will publish a public notice of this 
final decision in the Federal Register.

IV. Authority and Signature

    David Michaels, Ph.D., MPH, Assistant Secretary of Labor for 
Occupational Safety and Health, 200 Constitution Avenue NW., 
Washington, DC 20210, authorized the preparation of this notice. 
Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C. 
657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25, 
2012), and 29 CFR 1910.7.

    Signed at Washington, DC, on April 30, 2014.
David Michaels,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2014-10294 Filed 5-5-14; 8:45 am]
BILLING CODE 4510-26-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.