Meeting of the Manufacturing Council, 63964 [2013-25202]
Download as PDF
<![CDATA[
63964
Federal Register / Vol. 78, No. 207 / Friday, October 25, 2013 / Notices
meeting of the Environmental
Technologies Trade Advisory
Committee (ETTAC).
DEPARTMENT OF COMMERCE
The meeting is scheduled for
Tuesday, November 19, 2013, at 9:00
a.m. Eastern Standard Time (EST).
Meeting of the Manufacturing Council
International Trade Administration
DATES:
The meeting will be held in
Room 4830 at the U.S. Department of
Commerce, Herbert Clark Hoover
Building, 1401 Constitution Avenue
NW., Washington, DC 20230.
ADDRESSES:
Ms.
Maureen Hinman, Office of Energy &
Environmental Industries (OEEI),
International Trade Administration,
Room 4053, 1401 Constitution Avenue
NW., Washington, DC 20230 (Phone:
202–482–0627; Fax: 202–482–5665;
email: maureen.hinman@trade.gov.)
This meeting is physically accessible to
people with disabilities. Requests for
sign language interpretation or other
auxiliary aids should be directed to
OEEI at (202) 482–5225 no less than one
week prior to the meeting.
FOR FURTHER INFORMATION CONTACT:
The
meeting will take place from 9:00 a.m.
to 3:30 p.m. EST. The general meeting
is open to the public and time will be
permitted for public comment from
3:00–3:30 p.m. EST. Those interested in
attending must provide notification by
Tuesday, November 12, 2013 at 5:00
p.m. EST, via the contact information
provided above. Written comments
concerning ETTAC affairs are welcome
any time before or after the meeting.
Minutes will be available within 30
days of this meeting.
Topics to be considered: The agenda
for this meeting will include
discussions about proposed
recommendations to the Secretary of
Commerce. The status of the U.S.
Environmental Export Initiative will
also be discussed.
Background: The ETTAC is mandated
by Public Law 103–392. It was created
to advise the U.S. government on
environmental trade policies and
programs, and to help it to focus its
resources on increasing the exports of
the U.S. environmental industry.
ETTAC operates as an advisory
committee to the Secretary of Commerce
and the Trade Promotion Coordinating
Committee (TPCC). ETTAC was
originally chartered in May of 1994. It
was most recently re-chartered until
September 2014.
emcdonald on DSK67QTVN1PROD with NOTICES
SUPPLEMENTARY INFORMATION:
Catherine Vial,
Acting Office Director, Office of Energy and
Environmental Industries.
[FR Doc. 2013–25066 Filed 10–24–13; 8:45 am]
BILLING CODE 3510–DR–P
VerDate Mar<15>2010
17:55 Oct 24, 2013
Jkt 232001
International Trade
Administration, U.S. Department of
Commerce.
ACTION: Notice of an open meeting.
AGENCY:
The Manufacturing Council
will hold a meeting to discuss the work
the Council will focus on for the
remainder of its term. At the meeting,
the Council will hear updates from its
four subcommittees on workforce
development and public perception of
manufacturing; manufacturing energy
policy; tax policy and export growth;
and innovation, research and
development. The Council will discuss
current workforce development efforts
by the federal government, the
importance of alternative energy
technologies for manufacturers, the
effects of current tax policies on
manufacturers, and the importance of
continued research and development for
the manufacturing industry. A final
agenda will be available on the
Council’s Web site one week prior to the
meeting. The Council was re-chartered
on April 5, 2012, to advise the Secretary
of Commerce on government programs
and policies that affect U.S.
manufacturing and provide a means of
ensuring regular contact between the
U.S. Government and the manufacturing
sector.
DATES: November 13, 2013, 9 a.m.–12
p.m. Central Standard Time (CST).
ADDRESSES: The meeting will be held at
the Hilton Americas—Houston, 1600
Lamar Street, Houston, TX 77010 in the
Lanier Grand Ballroom. Due to building
security, all attendees must pre-register.
This meeting will be physically
accessible to people with disabilities.
Seating is limited and will be on a first
come, first served basis. Requests for
sign language interpretation, other
auxiliary aids, or pre-registration,
should be submitted no later than
November 6, 2013, to Elizabeth
Emanuel, the Manufacturing Council,
Room 4043, 1401 Constitution Avenue
NW., Washington, DC 20230, telephone
202–482–1369, elizabeth.emanuel@
trade.gov. Last minute requests will be
accepted, but may be impossible to fill.
FOR FURTHER INFORMATION CONTACT:
Elizabeth Emanuel, the Manufacturing
Council, Room 4043, 1401 Constitution
Avenue NW., Washington, DC, 20230,
telephone: 202–482–1369, email:
elizabeth.emanuel@trade.gov.
SUPPLEMENTARY INFORMATION: A limited
amount of time, from 11:30–12, will be
SUMMARY:
PO 00000
Frm 00006
Fmt 4703
Sfmt 4703
made available for pertinent brief oral
comments from members of the public
attending the meeting. To accommodate
as many speakers as possible, the time
for public comments will be limited to
5 minutes per person. Individuals
wishing to reserve speaking time during
the meeting must contact Ms. Emanuel
and submit a brief statement of the
general nature of the comments, as well
as the name and address of the proposed
speaker, by 5 p.m. Eastern Standard
Time (EST) on Thursday, November 7,
2013. If the number of registrants
requesting to make statements is greater
than can be reasonably accommodated
during the meeting, the International
Trade Administration may conduct a
lottery to determine the speakers.
Speakers are requested to bring at least
25 copies of their oral comments for
distribution to the members of the
Manufacturing Council and to the
public at the meeting. Any member of
the public may submit pertinent written
comments concerning the
Manufacturing Council’s affairs at any
time before or after the meeting.
Comments may be submitted to
Elizabeth Emanuel, the Manufacturing
Council, Room 4043, 1401 Constitution
Avenue NW., Washington, DC, 20230,
telephone: 202–482–1369, email:
elizabeth.emanuel@trade.gov. To be
considered during the meeting, written
comments must be received by 5:00
p.m. EST on Thursday, November 7,
2013, to ensure transmission to the
Manufacturing Council prior to the
meeting. Comments received after that
date will be distributed to the members
but may not be considered at the
meeting.
Copies of Council meeting minutes
will be available within 90 days of the
meeting.
Dated: October 22, 2013.
Elizabeth Emanuel,
Executive Secretary, The Manufacturing
Council.
[FR Doc. 2013–25202 Filed 10–22–13; 4:15 pm]
BILLING CODE 3510–DR–P
DEPARTMENT OF COMMERCE
National Institute of Standards and
Technology
[Docket No. 130612544–3544–01]
Request for Comments on Draft NIST
Interagency Report (NISTIR) 7628 Rev.
1, Guidelines for Smart Grid Cyber
Security
National Institute of Standards
and Technology (NIST), Department of
Commerce.
AGENCY:
E:\FR\FM\25OCN1.SGM
25OCN1
]]>Agencies
[Federal Register Volume 78, Number 207 (Friday, October 25, 2013)]
[Notices]
[Page 63964]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2013-25202]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
Meeting of the Manufacturing Council
AGENCY: International Trade Administration, U.S. Department of
Commerce.
ACTION: Notice of an open meeting.
-----------------------------------------------------------------------
SUMMARY: The Manufacturing Council will hold a meeting to discuss the
work the Council will focus on for the remainder of its term. At the
meeting, the Council will hear updates from its four subcommittees on
workforce development and public perception of manufacturing;
manufacturing energy policy; tax policy and export growth; and
innovation, research and development. The Council will discuss current
workforce development efforts by the federal government, the importance
of alternative energy technologies for manufacturers, the effects of
current tax policies on manufacturers, and the importance of continued
research and development for the manufacturing industry. A final agenda
will be available on the Council's Web site one week prior to the
meeting. The Council was re-chartered on April 5, 2012, to advise the
Secretary of Commerce on government programs and policies that affect
U.S. manufacturing and provide a means of ensuring regular contact
between the U.S. Government and the manufacturing sector.
DATES: November 13, 2013, 9 a.m.-12 p.m. Central Standard Time (CST).
ADDRESSES: The meeting will be held at the Hilton Americas--Houston,
1600 Lamar Street, Houston, TX 77010 in the Lanier Grand Ballroom. Due
to building security, all attendees must pre-register. This meeting
will be physically accessible to people with disabilities. Seating is
limited and will be on a first come, first served basis. Requests for
sign language interpretation, other auxiliary aids, or pre-
registration, should be submitted no later than November 6, 2013, to
Elizabeth Emanuel, the Manufacturing Council, Room 4043, 1401
Constitution Avenue NW., Washington, DC 20230, telephone 202-482-1369,
elizabeth.emanuel@trade.gov. Last minute requests will be accepted, but
may be impossible to fill.
FOR FURTHER INFORMATION CONTACT: Elizabeth Emanuel, the Manufacturing
Council, Room 4043, 1401 Constitution Avenue NW., Washington, DC,
20230, telephone: 202-482-1369, email: elizabeth.emanuel@trade.gov.
SUPPLEMENTARY INFORMATION: A limited amount of time, from 11:30-12,
will be made available for pertinent brief oral comments from members
of the public attending the meeting. To accommodate as many speakers as
possible, the time for public comments will be limited to 5 minutes per
person. Individuals wishing to reserve speaking time during the meeting
must contact Ms. Emanuel and submit a brief statement of the general
nature of the comments, as well as the name and address of the proposed
speaker, by 5 p.m. Eastern Standard Time (EST) on Thursday, November 7,
2013. If the number of registrants requesting to make statements is
greater than can be reasonably accommodated during the meeting, the
International Trade Administration may conduct a lottery to determine
the speakers. Speakers are requested to bring at least 25 copies of
their oral comments for distribution to the members of the
Manufacturing Council and to the public at the meeting. Any member of
the public may submit pertinent written comments concerning the
Manufacturing Council's affairs at any time before or after the
meeting. Comments may be submitted to Elizabeth Emanuel, the
Manufacturing Council, Room 4043, 1401 Constitution Avenue NW.,
Washington, DC, 20230, telephone: 202-482-1369, email:
elizabeth.emanuel@trade.gov. To be considered during the meeting,
written comments must be received by 5:00 p.m. EST on Thursday,
November 7, 2013, to ensure transmission to the Manufacturing Council
prior to the meeting. Comments received after that date will be
distributed to the members but may not be considered at the meeting.
Copies of Council meeting minutes will be available within 90 days
of the meeting.
Dated: October 22, 2013.
Elizabeth Emanuel,
Executive Secretary, The Manufacturing Council.
[FR Doc. 2013-25202 Filed 10-22-13; 4:15 pm]
BILLING CODE 3510-DR-P
