Standard for Welding, Cutting, and Brazing; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements, 53159-53161 [2013-20954]

Download as PDF Federal Register / Vol. 78, No. 167 / Wednesday, August 28, 2013 / Notices INTERNATIONAL TRADE COMMISSION [Investigation No. 337–TA–819] Certain Semiconductor Chips With Dram Circuitry, and Modules and Products Containing Same: Notice of Commission Determination To Terminate the Investigation Based on Settlement U.S. International Trade Commission. ACTION: Notice. AGENCY: Notice is hereby given that the U.S. International Trade Commission has determined to terminate the above-captioned investigation based on a settlement agreement between the parties. FOR FURTHER INFORMATION CONTACT: Clark S. Cheney, Office of the General Counsel, U.S. International Trade Commission, 500 E Street SW., Washington, DC 20436, telephone 202– 205–2661. Copies of non-confidential documents filed in connection with this investigation are or will be available for inspection during official business hours (8:45 a.m. to 5:15 p.m.) in the Office of the Secretary, U.S. International Trade Commission, 500 E Street SW., Washington, DC 20436, telephone 202–205–2000. General information concerning the Commission may also be obtained by accessing its Internet server (http://www.usitc.gov). The public record for this investigation may be viewed on the Commission’s electronic docket (EDIS) at http://edis. usitc.gov. Hearing-impaired persons are advised that information on this matter can be obtained by contacting the Commission’s TDD terminal on 202– 205–1810. SUPPLEMENTARY INFORMATION: The Commission instituted this investigation on December 21, 2011, based on a complaint filed by Elpida Memory, Inc., of Tokyo, Japan, and Elpida Memory (USA) Inc. of Sunnyvale, California (collectively, ‘‘Elpida’’). 76 FR 79215 (Dec. 21, 2011). The complaint alleged violations of section 337 of the Tariff Act of 1930, as amended (19 U.S.C. 1337), based on infringement of several U.S. patents. The notice of investigation named Nanya Technology Corporation of Tao Yuan, Taiwan, and Nanya Technology Corporation, U.S.A. of Santa Clara, California (collectively, ‘‘Nanya’’), as respondents. The Office of Unfair Import Investigations did not participate in the investigation. On March 26, 2013, the ALJ issued a final initial determination (‘‘ID’’) finding a violation of section 337 with respect wreier-aviles on DSK5TPTVN1PROD with NOTICES SUMMARY: VerDate Mar<15>2010 15:21 Aug 27, 2013 Jkt 229001 to several patents but not with respect to U.S. Patent No. 7,659,571 (‘‘the ’571 patent’’). On April 8, 2013, complainant Elpida and Nanya filed petitions for review of certain portions of the ID but not for review of the determination of no violation with respect to the ’571 patent. On July 2, 2013, the Commission determined not to review the determination of no violation with respect to the ’571 patent and that determination became final. The Commission determined to review the remainder of the ID and requested certain briefing from the parties and from the public. On July 31, 2013, the parties jointly moved for termination of the investigation based on a settlement agreement. The Commission has determined that the motion to terminate the investigation based on a settlement agreement complies with Commission Rule 210.21 (19 CFR 210.21). The Commission has further determined that terminating the investigation based on the settlement agreement between Elpida and Nanya is not contrary to the public interest. Accordingly, the Commission has determined to grant the joint motion and terminate the investigation. The issues previously under review by the Commission are now moot in view of the parties’ settlement. The portions of the ID previously under review by the Commission do not constitute a Commission determination and have been set aside. See Commission Rule 210.45(c) (19 CFR 210.45(c)). The authority for the Commission’s determination is contained in section 337 of the Tariff Act of 1930, as amended (19 U.S.C. 1337), and in Part 210 of the Commission’s Rules of Practice and Procedure (19 CFR Part 210). By order of the Commission. Issued: August 22, 2013. Lisa R. Barton, Acting Secretary to the Commission. [FR Doc. 2013–20952 Filed 8–27–13; 8:45 am] BILLING CODE 7020–02–P JUDICIAL CONFERENCE OF THE UNITED STATES Meeting of the Judicial Conference Committee on Rules of Practice and Procedure Judicial Conference of the United States Advisory Committee on Rules of Criminal Procedure. ACTION: Notice of open meeting. AGENCY: PO 00000 Frm 00033 Fmt 4703 Sfmt 4703 53159 The Advisory Committee on Rules of Criminal Procedure will hold a one-day meeting. The meeting will be open to public observation but not participation. DATES: October 18, 2013. Time: 8:30 a.m. to 5:00 p.m. ADDRESSES: University of Utah, S.J. Quinney College of Law, 332 South 1400 East, Salt Lake City, UT 84112. FOR FURTHER INFORMATION CONTACT: Jonathan C. Rose, Secretary and Chief Rules Officer, Rules Committee Support Office, Administrative Office of the United States Courts, Washington, DC 20544, telephone (202) 502–1820. SUMMARY: Dated: August 23, 2013. Jonathan C. Rose, Secretary and Chief Rules Officer . [FR Doc. 2013–20980 Filed 8–27–13; 8:45 am] BILLING CODE 2210–55–P DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA–2010–0037] Standard for Welding, Cutting, and Brazing; Extension of the Office of Management and Budget’s (OMB) Approval of Information Collection (Paperwork) Requirements Occupational Safety and Health Administration (OSHA), Labor. ACTION: Request for public comments. AGENCY: OSHA solicits public comments concerning its proposal to extend the Office of Management and Budget’s (OMB) approval of the information collection requirements contained in the Standard for Welding, Cutting, and Brazing (29 CFR Part 1910, Subpart Q). The information collected is used by employers and workers whenever welding, cutting, and brazing are performed. The purpose of the information is to ensure that employers evaluate hazards associated with welding and ensure that adequate measures are taken to make the process safe. DATES: Comments must be submitted (postmarked, sent, or received) by October 28, 2013. ADDRESSES: Electronically: You may submit comments and attachments electronically at http:// www.regulations.gov, which is the Federal eRulemaking Portal. Follow the instructions online for submitting comments. Facsimile: If your comments, including attachments, are not longer SUMMARY: E:\FR\FM\28AUN1.SGM 28AUN1 53160 Federal Register / Vol. 78, No. 167 / Wednesday, August 28, 2013 / Notices than 10 pages, you may fax them to the OSHA Docket Office at (202) 693–1648. Mail, hand delivery, express mail, messenger, or courier service: When using this method, you must submit a copy of your comments and attachments to the OSHA Docket Office, OSHA Docket No. OSHA–2010–0037, U.S. Department of Labor, Occupational Safety and Health Administration, Room N–2625, 200 Constitution Avenue NW., Washington, DC 20210. Deliveries (hand, express mail, messenger, and courier service) are accepted during the Department of Labor’s and Docket Office’s normal business hours, 8:15 a.m. to 4:45 p.m., e.t. Instructions: All submissions must include the Agency name and OSHA docket number (OSHA–2010–0037) for the Information Collection Request (ICR). All comments, including any personal information you provide, are placed in the public docket without change, and may be made available online at http://www.regulations.gov. For further information on submitting comments see the ‘‘Public Participation’’ heading in the section of this notice titled SUPPLEMENTARY INFORMATION. Docket: To read or download comments or other material in the docket, go to http://www.regulations.gov or the OSHA Docket Office at the address above. All documents in the docket (including this Federal Register notice) are listed in the http:// www.regulations.gov index; however, some information (e.g., copyrighted material) is not publicly available to read or download from the Web site. All submissions, including copyrighted material, are available for inspection and copying at the OSHA Docket Office. You may also contact Theda Kenney at the address below to obtain a copy of the ICR. FOR FURTHER INFORMATION CONTACT: Theda Kenney or Todd Owen, Directorate of Standards and Guidance, OSHA, U.S. Department of Labor, Room N–3609, 200 Constitution Avenue NW., Washington, DC 20210; telephone (202) 693–2044. SUPPLEMENTARY INFORMATION: wreier-aviles on DSK5TPTVN1PROD with NOTICES I. Background The Department of Labor, as part of its continuing effort to reduce paperwork and respondent (i.e., employer) burden, conducts a preclearance consultation program to provide the public with an opportunity to comment on proposed and continuing information collection requirements in accord with the Paperwork Reduction Act of 1995 (PRA–95) (44 U.S.C. 3506(c)(2)(A)). This VerDate Mar<15>2010 15:21 Aug 27, 2013 Jkt 229001 program ensures that information is in the desired format, reporting burden (time and costs) is minimal, collection instruments are clearly understood, and OSHA’s estimate of the information collection burden is accurate. The Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651 et seq.) authorizes information collection by employers as necessary or appropriate for enforcement of the OSH Act or for developing information regarding the causes and prevention of occupational injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also requires OSHA to obtain such information with minimum burden upon employers, especially those operating small businesses, and to reduce to the maximum extent feasible unnecessary duplication of efforts in obtaining information (29 U.S.C. 657). Section 1910.255(e) requires that a periodic inspection of resistance welding equipment be made by qualified maintenance personnel, and that a certification record be generated and maintained. The certification shall include the date of the inspection, the signature of the person who performed the inspection and the serial number, or other identifier, for the equipment inspected. The record shall be made available to an OSHA inspector upon request. The maintenance inspection ensures that welding equipment is in safe operating condition while the maintenance record provides evidence to workers and Agency compliance officers that employers performed the required inspections. II. Special Issues for Comment OSHA has a particular interest in comments on the following issues: • Whether the proposed information collection requirements are necessary for the proper performance of the Agency’s functions, including whether the information is useful; • The accuracy of OSHA’s estimate of the burden (time and costs) of the information collection requirements, including the validity of the methodology and assumptions used; • The quality, utility, and clarity of the information collected; and • Ways to minimize the burden on employers who must comply; for example, by using automated or other technological information collection and transmission techniques. III. Proposed Actions The Agency requests an adjustment decrease of 300 burden hours (from 5,935 burden hours to 5,635 burden hours) associated with the collection of information in the Welding, Cutting, PO 00000 Frm 00034 Fmt 4703 Sfmt 4703 and Brazing Standard. The Agency will summarize the comments submitted in response to this notice, and will include this summary in its request to OMB. Type of Review: Extension of a currently approved collection. Title: Standard for Welding, Cutting, and Brazing. OMB Control Number: 1218–0207. Affected Public: Business or other forprofits. Number of Respondents: 20,094. Frequency of Response: On occasion. Total Responses: 80,657. Average Time per Response: OSHA estimates it will take 1 minute (.02 hour) to maintain the inspection certification record to 5 minutes (.08 hour) for each welder to perform the inspection periodically (semiannually). Estimated Total Burden Hours: 5,635. Estimated Cost (Operation and Maintenance): $0. IV. Public Participation—Submission of Comments on This Notice and Internet Access to Comments and Submissions You may submit comments in response to this document as follows: (1) Electronically at http:// www.regulations.gov, which is the Federal eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All comments, attachments, and other material must identify the Agency name and the OSHA docket number for the ICR (Docket No. OSHA–2010–0037). You may supplement electronic submissions by uploading document files electronically. If you wish to mail additional materials in reference to an electronic or facsimile submission, you must submit them to the OSHA Docket Office (see the section of this notice titled ADDRESSES). The additional materials must clearly identify your electronic comments by your name, date, and the docket number so the Agency can attach them to your comments. Because of security procedures, the use of regular mail may cause a significant delay in the receipt of comments. For information about security procedures concerning the delivery of materials by hand, express delivery, messenger, or courier service, please contact the OSHA Docket Office at (202) 693–2350, (TTY (877) 889– 5627). Comments and submissions are posted without change at http:// www.regulations.gov. Therefore, OSHA cautions commenters about submitting personal information such as social security numbers and dates of birth. Although all submissions are listed in the http://www.regulations.gov index, some information (e.g., copyrighted material) is not publicly available to E:\FR\FM\28AUN1.SGM 28AUN1 Federal Register / Vol. 78, No. 167 / Wednesday, August 28, 2013 / Notices read or download through this Web site. All submissions, including copyrighted material, are available for inspection and copying at the OSHA Docket Office. Information on using the http:// www.regulations.gov Web site to submit comments and access the docket is available at the Web site’s ‘‘User Tips’’ link. Contact the OSHA Docket Office for information about materials not available through the Web site and for assistance in using the Internet to locate docket submissions. V. Authority and Signature David Michaels, Ph.D., MPH, Assistant Secretary of Labor for Occupational Safety and Health, directed the preparation of this notice. The authority for this notice is the Paperwork Reduction Act of 1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor’s Order No. 1–2012 (77 FR 3912, January 25, 2012). Signed at Washington, DC, on August 22, 2013. David Michaels, Assistant Secretary of Labor for Occupational Safety and Health. [FR Doc. 2013–20954 Filed 8–27–13; 8:45 am] BILLING CODE 4510–26–P NATIONAL CREDIT UNION ADMINISTRATION Agency Information Collection Activities: Submission to OMB for Reinstatement, With Change, of a Previously Approved Collection; Comment Request National Credit Union Administration (NCUA). ACTION: Request for comment. AGENCY: The NCUA intends to submit the following information collection to the Office of Management and Budget (OMB) for review and clearance under the Paperwork Reduction Act of 1995. The information collection relates to requests for non-public records and for testimony by NCUA employees in legal proceedings. This information collection notice is published to obtain comments from the public. DATES: Comments will be accepted until September 27, 2013. ADDRESSES: Interested parties are invited to submit written comments to the NCUA Contact and the OMB Reviewer listed below: NCUA Contact: Tracy Crews, National Credit Union Administration, 1775 Duke Street, Alexandria, Virginia 22314–3428, Fax No. 703–837–2861, Email: OCIOPRA@ncua.gov. wreier-aviles on DSK5TPTVN1PROD with NOTICES SUMMARY: VerDate Mar<15>2010 15:21 Aug 27, 2013 Jkt 229001 OMB Contact: Office of Management and Budget, ATTN: Desk Officer for the National Credit Union Administration, Office of Information and Regulatory Affairs, Washington, DC 20503. FOR FURTHER INFORMATION CONTACT: Requests for additional information, a copy of the information collection request, or a copy of submitted comments should be directed to Tracy Crews at the National Credit Union Administration, 1775 Duke Street, Alexandria, VA 22314–3428, or at (703) 518–6444. SUPPLEMENTARY INFORMATION: I. Abstract and Request for Comments NCUA is reinstating a previously approved collection of information for 3133–0146. 12 CFR part 792, Subpart C requires anyone requesting NCUA nonpublic records for use in legal proceedings, or similarly the testimony of NCUA personnel, to provide NCUA with information regarding the requester’s grounds for the request. This process is also known as a ‘‘Touhy Request’’. The information collected will help the NCUA decide whether to release non-public records or permit employees to testify in legal proceedings. NCUA regulations also require an entity or person in possession of NCUA records to notify the NCUA upon receipt of a subpoena for those records. The NCUA requires this notice to protect its records and, when necessary, intervene in litigation or file an objection to the disclosure of its confidential information in the appropriate court or tribunal. The NCUA requests that you send your comments on this collection to the location listed in the addresses section. Your comments should address: (a) The necessity of the information collection for the proper performance of NCUA, including whether the information will have practical utility; (b) the accuracy of our estimate of the burden (hours and cost) of the collection of information, including the validity of the methodology and assumptions used; (c) ways we could enhance the quality, utility, and clarity of the information to be collected; and (d) ways we could minimize the burden of the collection of the information on the respondents such as through the use of automated collection techniques or other forms of information technology. It is NCUA’s policy to make all comments available to the public for review. PO 00000 Frm 00035 Fmt 4703 Sfmt 4703 53161 II. Data Title: Production of Non-public Records and Testimony of Employees in Legal Proceedings (Touhy Request). OMB Number: 3133–0146. Form Number: None. Type of Review: Reinstatement, with change, of a previously approved collection. Description: The regulation in 12 CFR part 792, Subpart C details the requirements for obtaining the production of nonpublic NCUA records for use in legal proceedings and testimony of NCUA personnel. Respondents: Respondents will most likely be persons involved in legal proceedings. Estimated No. of Respondents/ Recordkeepers: 20. Estimated Burden Hours per Response: 2 hours. Frequency of Response: Reporting, on occasion. Estimated Total Annual Burden Hours: 40. Estimated Total Annual Cost: None. By the National Credit Union Administration Board on August 22, 2013. Gerard Poliquin, Secretary of the Board. [FR Doc. 2013–20946 Filed 8–27–13; 8:45 am] BILLING CODE 7535–01–P NATIONAL CREDIT UNION ADMINISTRATION Agency Information Collection Activities: Submission to OMB for Reinstatement, Without Change, of a Previously Approved Collection; Comment Request National Credit Union Administration (NCUA). ACTION: Request for comment. AGENCY: The NCUA intends to submit the following information collection to the Office of Management and Budget (OMB) for review and clearance under the Paperwork Reduction Act of 1995. This information collection is published to obtain comments from the public. The information collection applies to credit unions that engage in member business lending and requires written loan policies that address the various aspects of the member business loan program. Credit unions desiring a waiver from appraisal requirements, aggregate construction and development loan, loan-to-value ratios, personal liability and guarantee requirements, unsecured lending limits to one borrower, aggregate unsecured lending limits, or outstanding loans to one borrower limits of NCUA’s Rules and SUMMARY: E:\FR\FM\28AUN1.SGM 28AUN1

Agencies

[Federal Register Volume 78, Number 167 (Wednesday, August 28, 2013)]
[Notices]
[Pages 53159-53161]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2013-20954]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2010-0037]


Standard for Welding, Cutting, and Brazing; Extension of the 
Office of Management and Budget's (OMB) Approval of Information 
Collection (Paperwork) Requirements

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Request for public comments.

-----------------------------------------------------------------------

SUMMARY: OSHA solicits public comments concerning its proposal to 
extend the Office of Management and Budget's (OMB) approval of the 
information collection requirements contained in the Standard for 
Welding, Cutting, and Brazing (29 CFR Part 1910, Subpart Q). The 
information collected is used by employers and workers whenever 
welding, cutting, and brazing are performed. The purpose of the 
information is to ensure that employers evaluate hazards associated 
with welding and ensure that adequate measures are taken to make the 
process safe.

DATES: Comments must be submitted (postmarked, sent, or received) by 
October 28, 2013.

ADDRESSES:
    Electronically: You may submit comments and attachments 
electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal. Follow the instructions online for submitting 
comments.
    Facsimile: If your comments, including attachments, are not longer

[[Page 53160]]

than 10 pages, you may fax them to the OSHA Docket Office at (202) 693-
1648.
    Mail, hand delivery, express mail, messenger, or courier service: 
When using this method, you must submit a copy of your comments and 
attachments to the OSHA Docket Office, OSHA Docket No. OSHA-2010-0037, 
U.S. Department of Labor, Occupational Safety and Health 
Administration, Room N-2625, 200 Constitution Avenue NW., Washington, 
DC 20210. Deliveries (hand, express mail, messenger, and courier 
service) are accepted during the Department of Labor's and Docket 
Office's normal business hours, 8:15 a.m. to 4:45 p.m., e.t.
    Instructions: All submissions must include the Agency name and OSHA 
docket number (OSHA-2010-0037) for the Information Collection Request 
(ICR). All comments, including any personal information you provide, 
are placed in the public docket without change, and may be made 
available online at http://www.regulations.gov. For further information 
on submitting comments see the ``Public Participation'' heading in the 
section of this notice titled SUPPLEMENTARY INFORMATION.
    Docket: To read or download comments or other material in the 
docket, go to http://www.regulations.gov or the OSHA Docket Office at 
the address above. All documents in the docket (including this Federal 
Register notice) are listed in the http://www.regulations.gov index; 
however, some information (e.g., copyrighted material) is not publicly 
available to read or download from the Web site. All submissions, 
including copyrighted material, are available for inspection and 
copying at the OSHA Docket Office. You may also contact Theda Kenney at 
the address below to obtain a copy of the ICR.

FOR FURTHER INFORMATION CONTACT: Theda Kenney or Todd Owen, Directorate 
of Standards and Guidance, OSHA, U.S. Department of Labor, Room N-3609, 
200 Constitution Avenue NW., Washington, DC 20210; telephone (202) 693-
2044.

SUPPLEMENTARY INFORMATION:

I. Background

    The Department of Labor, as part of its continuing effort to reduce 
paperwork and respondent (i.e., employer) burden, conducts a 
preclearance consultation program to provide the public with an 
opportunity to comment on proposed and continuing information 
collection requirements in accord with the Paperwork Reduction Act of 
1995 (PRA-95) (44 U.S.C. 3506(c)(2)(A)). This program ensures that 
information is in the desired format, reporting burden (time and costs) 
is minimal, collection instruments are clearly understood, and OSHA's 
estimate of the information collection burden is accurate. The 
Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651 
et seq.) authorizes information collection by employers as necessary or 
appropriate for enforcement of the OSH Act or for developing 
information regarding the causes and prevention of occupational 
injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also 
requires OSHA to obtain such information with minimum burden upon 
employers, especially those operating small businesses, and to reduce 
to the maximum extent feasible unnecessary duplication of efforts in 
obtaining information (29 U.S.C. 657).
    Section 1910.255(e) requires that a periodic inspection of 
resistance welding equipment be made by qualified maintenance 
personnel, and that a certification record be generated and maintained. 
The certification shall include the date of the inspection, the 
signature of the person who performed the inspection and the serial 
number, or other identifier, for the equipment inspected. The record 
shall be made available to an OSHA inspector upon request. The 
maintenance inspection ensures that welding equipment is in safe 
operating condition while the maintenance record provides evidence to 
workers and Agency compliance officers that employers performed the 
required inspections.

II. Special Issues for Comment

    OSHA has a particular interest in comments on the following issues:
     Whether the proposed information collection requirements 
are necessary for the proper performance of the Agency's functions, 
including whether the information is useful;
     The accuracy of OSHA's estimate of the burden (time and 
costs) of the information collection requirements, including the 
validity of the methodology and assumptions used;
     The quality, utility, and clarity of the information 
collected; and
     Ways to minimize the burden on employers who must comply; 
for example, by using automated or other technological information 
collection and transmission techniques.

III. Proposed Actions

    The Agency requests an adjustment decrease of 300 burden hours 
(from 5,935 burden hours to 5,635 burden hours) associated with the 
collection of information in the Welding, Cutting, and Brazing 
Standard. The Agency will summarize the comments submitted in response 
to this notice, and will include this summary in its request to OMB.
    Type of Review: Extension of a currently approved collection.
    Title: Standard for Welding, Cutting, and Brazing.
    OMB Control Number: 1218-0207.
    Affected Public: Business or other for-profits.
    Number of Respondents: 20,094.
    Frequency of Response: On occasion.
    Total Responses: 80,657.
    Average Time per Response: OSHA estimates it will take 1 minute 
(.02 hour) to maintain the inspection certification record to 5 minutes 
(.08 hour) for each welder to perform the inspection periodically 
(semiannually).
    Estimated Total Burden Hours: 5,635.
    Estimated Cost (Operation and Maintenance): $0.

IV. Public Participation--Submission of Comments on This Notice and 
Internet Access to Comments and Submissions

    You may submit comments in response to this document as follows: 
(1) Electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All 
comments, attachments, and other material must identify the Agency name 
and the OSHA docket number for the ICR (Docket No. OSHA-2010-0037). You 
may supplement electronic submissions by uploading document files 
electronically. If you wish to mail additional materials in reference 
to an electronic or facsimile submission, you must submit them to the 
OSHA Docket Office (see the section of this notice titled ADDRESSES). 
The additional materials must clearly identify your electronic comments 
by your name, date, and the docket number so the Agency can attach them 
to your comments.
    Because of security procedures, the use of regular mail may cause a 
significant delay in the receipt of comments. For information about 
security procedures concerning the delivery of materials by hand, 
express delivery, messenger, or courier service, please contact the 
OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627). Comments 
and submissions are posted without change at http://www.regulations.gov. Therefore, OSHA cautions commenters about 
submitting personal information such as social security numbers and 
dates of birth. Although all submissions are listed in the http://www.regulations.gov index, some information (e.g., copyrighted 
material) is not publicly available to

[[Page 53161]]

read or download through this Web site. All submissions, including 
copyrighted material, are available for inspection and copying at the 
OSHA Docket Office. Information on using the http://www.regulations.gov 
Web site to submit comments and access the docket is available at the 
Web site's ``User Tips'' link. Contact the OSHA Docket Office for 
information about materials not available through the Web site and for 
assistance in using the Internet to locate docket submissions.

V. Authority and Signature

    David Michaels, Ph.D., MPH, Assistant Secretary of Labor for 
Occupational Safety and Health, directed the preparation of this 
notice. The authority for this notice is the Paperwork Reduction Act of 
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 1-2012 
(77 FR 3912, January 25, 2012).

    Signed at Washington, DC, on August 22, 2013.
David Michaels,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2013-20954 Filed 8-27-13; 8:45 am]
BILLING CODE 4510-26-P