Application(s) for Duty-Free Entry of Scientific Instruments, 34990-34991 [2013-13879]

Download as PDF 34990 Federal Register / Vol. 78, No. 112 / Tuesday, June 11, 2013 / Notices wreier-aviles on DSK5TPTVN1PROD with NOTICES hexametaphosphate has a P2O5 content from 60 to 71 percent. Alternate names for sodium hexametaphosphate include the following: Calgon; Calgon S; Glassy Sodium Phosphate; Sodium Polyphosphate, Glassy; Metaphosphoric Acid; Sodium Salt; Sodium Acid Metaphosphate; Graham’s Salt; Sodium Hex; Polyphosphoric Acid, Sodium Salt; Glass H; Hexaphos; Sodaphos; Vitrafos; and BAC–N–FOS. Sodium hexametaphosphate is typically sold as a white powder or granule (crushed) and may also be sold in the form of sheets (glass) or as a liquid solution. It is imported under heading 2835.39.5000, Harmonized Tariff Schedule of the United States (‘‘HTSUS’’). It may also be imported as a blend or mixture under heading 3824.90.3900, HTSUS. The American Chemical Society, Chemical Abstract Service (‘‘CAS’’) has assigned the name ‘‘Polyphosphoric Acid, Sodium Salt’’ to sodium hexametaphosphate. The CAS registry number is 68915–31–1. However, sodium hexametaphosphate is commonly identified by CAS No. 10124–56–8 in the market. For purposes of the order, the narrative description is dispositive, not the tariff heading, CAS registry number or CAS name. The product covered by the order includes sodium hexametaphosphate in all grades, whether food grade or technical grade. The product covered by the order includes sodium hexametaphosphate without regard to chain length, i.e., whether regular or long chain. The product covered by the order includes sodium hexametaphosphate without regard to physical form, whether glass, sheet, crushed, granule, powder, fines, or other form, and whether or not in solution. However, the product covered by the order does not include sodium hexametaphosphate when imported in a blend with other materials in which the sodium hexametaphosphate accounts for less than 50 percent by volume of the finished product. Analysis of Comments Received All issues raised in this review are addressed in the ‘‘Issues and Decision Memorandum for the Expedited First Sunset Review of the Antidumping Duty Order on Sodium Hexametaphosphate from the People’s Republic of China’’ from Christian Marsh, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, to Paul Piquado, Assistant Secretary for Import Administration, dated concurrently with, and hereby adopted by, this notice (‘‘Decision Memorandum’’). The issues discussed in the Decision Memorandum include the likelihood of continuation VerDate Mar<15>2010 15:13 Jun 10, 2013 Jkt 229001 or recurrence of dumping and the magnitude of the margins likely to prevail if the order was to be revoked. Parties may find a complete discussion of all issues raised in the review and the corresponding recommendations in this public memorandum which is on file electronically via Import Administration’s Antidumping and Countervailing Duty Centralized Electronic Services System (‘‘IA ACCESS’’). Access to IA ACCESS is available to registered users at http:// iaaccess.trade.gov and is available to all parties in the Central Records Unit, room 7046 of the main Department of Commerce building. In addition, a complete version of the Decision Memorandum can be access directly on the Web at http://ia.ita.doc.gov/frn. The signed Decision Memorandum and the electronic versions of the Decision Memorandum are identical in content. Final Results of Review We determine that revocation of the order would be likely to lead to continuation or recurrence of dumping at the following weighted-average percentage margins: WeightedAverage Dumping Margin (percent) Exporter Jiangyin Chengxing International Trading Co., Ltd. ..................... Sichuan Mianzhu Norwest Phosphate Chemical Co. ................ PRC-Wide Rate .......................... 92.02 92.02 188.05 Administrative Protective Order This notice also serves as the only reminder to parties subject to administrative protective order (‘‘APO’’) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305. Timely notification of the return of destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction. This sunset review and notice are in accordance with sections 751(c), 752(c), and 771(i)(1) of the Act. Dated: June 3, 2013. Paul Piquado, Assistant Secretary for Import Administration. [FR Doc. 2013–13877 Filed 6–10–13; 8:45 am] BILLING CODE 3510–DS–P PO 00000 Frm 00017 Fmt 4703 Sfmt 4703 DEPARTMENT OF COMMERCE International Trade Administration Application(s) for Duty-Free Entry of Scientific Instruments Pursuant to Section 6(c) of the Educational, Scientific and Cultural Materials Importation Act of 1966 (Pub. L. 89–651, as amended by Pub. L. 106– 36; 80 Stat. 897; 15 CFR part 301), we invite comments on the question of whether instruments of equivalent scientific value, for the purposes for which the instruments shown below are intended to be used, are being manufactured in the United States. Comments must comply with 15 CFR 301.5(a)(3) and (4) of the regulations and be postmarked on or before July 1, 2013. Address written comments to Statutory Import Programs Staff, Room 3720, U.S. Department of Commerce, Washington, DC 20230. Applications may be examined between 8:30 a.m. and 5:00 p.m. at the U.S. Department of Commerce in Room 3720. Docket Number: 13–016. Applicant: Pacific Northwest National Laboratory, 902 Battelle Boulevard, Richland, WA 99352. Instrument: Electron Microscope. Manufacturer: JEOL Ltd., Japan. Intended Use: The instrument will be used for the development of new materials or the improvement of existing materials requiring a clear understanding of structure/property relationships, atomic structure, distribution of various constituent elements, and the presence of defects in materials. Justification for Duty-Free Entry: There are no instruments of the same general category manufactured in the United States. Application accepted by Commissioner of Customs: March 22, 2013. Docket Number: 13–018. Applicant: The Scripps Institute, 10550 North Torrey Pines Road, La Jolla, CA 92037. Instrument: Electron Microscope. Manufacturer: FEI Company, Czech Republic. Intended Use: The instrument will be used to determine the manner in which macromolecular biological assemblies including viruses, cellular protein assemblies, nanoparticles, and cellular organelles perform crucial life processes. Justification for Duty-Free Entry: There are no instruments of the same general category manufactured in the United States. Application accepted by Commissioner of Customs: April 11, 2013. Docket Number: 13–021. Applicant: University of Massachusetts Amherst, 120 Governors Drive, Amherst, MA 01003. Instrument: Electron Microscope. Manufacturer: JEOL Ltd., Japan. E:\FR\FM\11JNN1.SGM 11JNN1 wreier-aviles on DSK5TPTVN1PROD with NOTICES Federal Register / Vol. 78, No. 112 / Tuesday, June 11, 2013 / Notices Intended Use: The instrument will be used to identify structure/properties relationships of polymer based solar cells or for the structural analysis of polymer/nanoparticle hybrid materials for the development of high-density storage devices, as well as to study the self-assembly of bio-polymer systems for drug-delivery system development. Justification for Duty-Free Entry: There are no instruments of the same general category manufactured in the United States. Application accepted by Commissioner of Customs: April 3, 2013. Docket Number: 13–022. Applicant: University of Utah, 5C124 School of Medicine, Salt Lake City, UT 84132. Instrument: Electron Microscope. Manufacturer: JEOL Ltd., Japan. Intended Use: The instrument will be used to categorize tissues obtained from living organisms, cellular constructs, viruses, bacteria, and single-celled organisms, as well as particulate matter, including nanoparticles and other synthesized objects by cellular structure, morphology, and threedimensional structure. The effects of genetic mutation, disease, and different environmental conditions on the subjects will also be studied. Justification for Duty-Free Entry: There are no instruments of the same general category manufactured in the United States. Application accepted by Commissioner of Customs: May 22, 2013. Docket Number: 13–024. Applicant: University of Pennsylvania, 421 Curie Blvd., Biomedical Research Building, Room 1157, Perelman School of Medicine, Philadelphia, PA 19104. Instrument: Electron Microscope. Manufacturer: FEI Company, Czech Republic. Intended Use: The instrument will be used for the examination of traditional dehydrated, metal coated samples, as well as hydrated samples, and back-scattered electron detection of colloidal gold particles. Experiments will also require the identification and localization of specific macromolecules on the surface of cells or other structures, which requires a backscattered electron detector. Justification for Duty-Free Entry: There are no instruments of the same general category manufactured in the United States. Application accepted by Commissioner of Customs: May 16, 2013. Dated: June 5, 2013. Gregory W. Campbell, Director of Subsidies Enforcement, Import Administration. [FR Doc. 2013–13879 Filed 6–10–13; 8:45 am] BILLING CODE 3510–DS–P VerDate Mar<15>2010 15:13 Jun 10, 2013 Jkt 229001 34991 DEPARTMENT OF COMMERCE investigations therefore is September 16, 2013.3 International Trade Administration Dated: June 5, 2013. Paul Piquado, Assistant Secretary for Import Administration. [A–570–986; C–570–987] Hardwood and Decorative Plywood From the People’s Republic of China: Correction of Postponement of Final Determination of Antidumping Duty Investigation and Countervailing Duty Investigations and Extension of Provisional Measures Import Administration, International Trade Administration, Department of Commerce. DATES: Effective Date: June 11, 2013. FOR FURTHER INFORMATION CONTACT: Catherine Bertrand at (202) 482–3207, AD/CVD Operations, Office 9, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW, Washington, DC 20230. AGENCY: Correction of Postponement of Final Determination On June 3, 2013, the Department of Commerce (‘‘Department’’) published the postponement of the final determination of the antidumping duty investigation of hardwood and decorative plywood from the People’s Republic of China (‘‘PRC’’).1 In that notice, the Department inadvertently extended the final determination by only 50 days, whereas Department had intended to fully postpone the final by 60 days. Therefore, the Department is now correcting that notice and fully extending the final determination in accordance with sections 733(d) and 735(a)(2)(A) of the Tariff Act of 1930, as amended (‘‘the Act’’) and 19 CFR 351.210(b)(2)(ii) and (e). Accordingly, we are postponing the final determination by 60 days. We are also extending the application of the provisional measures prescribed under section 733(d) of the Act and 19 CFR 351.210(e)(2) from a four month period to a six month period. In addition, because the countervailing duty investigation of hardwood and decorative plywood from the PRC has been aligned with the concurrent antidumping duty investigation under section 705(a)(1) of the Act, the time limit for completion of the final determination in the countervailing duty investigation will be the same date.2 The final determination for both 1 See Hardwood and Decorative Plywood from the People’s Republic of China: Antidumping Duty Investigation; Correction and Postponement of Final Determination, 78 FR 33059 (June 3, 2013). 2 See Hardwood and Decorative Plywood From the People’s Republic of China: Amended PO 00000 Frm 00018 Fmt 4703 Sfmt 4703 [FR Doc. 2013–13871 Filed 6–10–13; 8:45 am] BILLING CODE 3510–DS–P BUREAU OF CONSUMER FINANCIAL PROTECTION Privacy Act of 1974, as Amended Bureau of Consumer Financial Protection. ACTION: Notice of Proposed Privacy Act System of Records. AGENCY: SUMMARY: In accordance with the Privacy Act of 1974, as amended, the Bureau of Consumer Financial Protection, hereinto referred to as the Consumer Financial Protection Bureau (CFPB or the Bureau), gives notice of the establishment of a Privacy Act System of Records. DATES: Comments must be received no later than July 11, 2013. The new system of records will be effective July 22, 2013, unless the comments received result in a contrary determination. ADDRESSES: You may submit comments by any of the following methods: • Electronic: privacy@cfpb.gov. • Mail/Hand Delivery/Courier: Claire Stapleton, Chief Privacy Officer, Consumer Financial Protection Bureau, 1700 G Street NW., Washington, DC 20552. Comments will be available for public inspection and copying at 1700 G Street NW., Washington, DC 20552 on official business days between the hours of 10 a.m. and 5 p.m. Eastern Time. You can make an appointment to inspect comments by telephoning (202) 435– 7220. All comments, including attachments and other supporting materials, will become part of the public record and subject to public disclosure. You should submit only information that you wish to make available publicly. FOR FURTHER INFORMATION CONTACT: Claire Stapleton, Chief Privacy Officer, Preliminary Countervailing Duty Determination; and Alignment of Final Determination With Final Antidumping Determination, 78 FR 16250 (March 14, 2013). 3 Day 60 falls on September 15, 2013, which is a Sunday. The Department’s practice dictates that where a deadline falls on a weekend or federal holiday, the appropriate deadline is the next business day. See Notice of Clarification: Application of ‘‘Next Business Day’’ Rule for Administrative Determination Deadlines Pursuant to the Tariff Act of 1930, as Amended, 70 FR 24533, 24533 (May 10, 2005). E:\FR\FM\11JNN1.SGM 11JNN1

Agencies

[Federal Register Volume 78, Number 112 (Tuesday, June 11, 2013)]
[Notices]
[Pages 34990-34991]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2013-13879]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration


Application(s) for Duty-Free Entry of Scientific Instruments

    Pursuant to Section 6(c) of the Educational, Scientific and 
Cultural Materials Importation Act of 1966 (Pub. L. 89-651, as amended 
by Pub. L. 106-36; 80 Stat. 897; 15 CFR part 301), we invite comments 
on the question of whether instruments of equivalent scientific value, 
for the purposes for which the instruments shown below are intended to 
be used, are being manufactured in the United States.
    Comments must comply with 15 CFR 301.5(a)(3) and (4) of the 
regulations and be postmarked on or before July 1, 2013. Address 
written comments to Statutory Import Programs Staff, Room 3720, U.S. 
Department of Commerce, Washington, DC 20230. Applications may be 
examined between 8:30 a.m. and 5:00 p.m. at the U.S. Department of 
Commerce in Room 3720.
    Docket Number: 13-016. Applicant: Pacific Northwest National 
Laboratory, 902 Battelle Boulevard, Richland, WA 99352. Instrument: 
Electron Microscope. Manufacturer: JEOL Ltd., Japan. Intended Use: The 
instrument will be used for the development of new materials or the 
improvement of existing materials requiring a clear understanding of 
structure/property relationships, atomic structure, distribution of 
various constituent elements, and the presence of defects in materials. 
Justification for Duty-Free Entry: There are no instruments of the same 
general category manufactured in the United States. Application 
accepted by Commissioner of Customs: March 22, 2013.
    Docket Number: 13-018. Applicant: The Scripps Institute, 10550 
North Torrey Pines Road, La Jolla, CA 92037. Instrument: Electron 
Microscope. Manufacturer: FEI Company, Czech Republic. Intended Use: 
The instrument will be used to determine the manner in which 
macromolecular biological assemblies including viruses, cellular 
protein assemblies, nanoparticles, and cellular organelles perform 
crucial life processes. Justification for Duty-Free Entry: There are no 
instruments of the same general category manufactured in the United 
States. Application accepted by Commissioner of Customs: April 11, 
2013.
    Docket Number: 13-021. Applicant: University of Massachusetts 
Amherst, 120 Governors Drive, Amherst, MA 01003. Instrument: Electron 
Microscope. Manufacturer: JEOL Ltd., Japan.

[[Page 34991]]

Intended Use: The instrument will be used to identify structure/
properties relationships of polymer based solar cells or for the 
structural analysis of polymer/nanoparticle hybrid materials for the 
development of high-density storage devices, as well as to study the 
self-assembly of bio-polymer systems for drug-delivery system 
development. Justification for Duty-Free Entry: There are no 
instruments of the same general category manufactured in the United 
States. Application accepted by Commissioner of Customs: April 3, 2013.
    Docket Number: 13-022. Applicant: University of Utah, 5C124 School 
of Medicine, Salt Lake City, UT 84132. Instrument: Electron Microscope. 
Manufacturer: JEOL Ltd., Japan. Intended Use: The instrument will be 
used to categorize tissues obtained from living organisms, cellular 
constructs, viruses, bacteria, and single-celled organisms, as well as 
particulate matter, including nanoparticles and other synthesized 
objects by cellular structure, morphology, and three-dimensional 
structure. The effects of genetic mutation, disease, and different 
environmental conditions on the subjects will also be studied. 
Justification for Duty-Free Entry: There are no instruments of the same 
general category manufactured in the United States. Application 
accepted by Commissioner of Customs: May 22, 2013.
    Docket Number: 13-024. Applicant: University of Pennsylvania, 421 
Curie Blvd., Biomedical Research Building, Room 1157, Perelman School 
of Medicine, Philadelphia, PA 19104. Instrument: Electron Microscope. 
Manufacturer: FEI Company, Czech Republic. Intended Use: The instrument 
will be used for the examination of traditional dehydrated, metal 
coated samples, as well as hydrated samples, and back-scattered 
electron detection of colloidal gold particles. Experiments will also 
require the identification and localization of specific macromolecules 
on the surface of cells or other structures, which requires a back-
scattered electron detector. Justification for Duty-Free Entry: There 
are no instruments of the same general category manufactured in the 
United States. Application accepted by Commissioner of Customs: May 16, 
2013.

    Dated: June 5, 2013.
Gregory W. Campbell,
Director of Subsidies Enforcement, Import Administration.
[FR Doc. 2013-13879 Filed 6-10-13; 8:45 am]
BILLING CODE 3510-DS-P