Meeting of the Manufacturing Council, 55810 [2012-22227]

Download as PDF 55810 Federal Register / Vol. 77, No. 176 / Tuesday, September 11, 2012 / Notices duties at the ad valorem PRC-wide entity rate of 198.63 percent. Cash Deposit Requirements The following cash deposit requirements, when imposed, will be effective upon publication of the final results of this review for all shipments of subject merchandise entered, or withdrawn from warehouse, for consumption on or after the publication date, as provided by section 751(a)(2)(C) of the Tariff Act of 1930, as amended (the Act): (1) The cash-deposit rate for each of the reviewed companies that received a separate rate in this review will be the rate listed in the final results of this review (except that if the rate for a particular company is de minimis, i.e., less than 0.50 percent, no cash deposit will be required for that company); (2) for previously investigated companies not listed above, the cash deposit rate will continue to be the companyspecific rate published for the most recent period of review; (3) if the exporter is a firm not covered in this review, a prior review, or the original less-than-fair-value investigation, but the manufacturer is, the cash deposit rate will be the rate established for the most recent period for the manufacturer of the subject merchandise; and (4) the cash deposit rate for all other manufacturers or exporters will be the PRC-wide rate of 198.63 percent. These cash deposit requirements, when imposed, shall remain in effect until further notice. srobinson on DSK4SPTVN1PROD with NOTICES Notification to Importers This notice serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this POR. Failure to comply with this requirement could result in the Secretary’s presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties. Administrative Protective Order This notice also serves as a reminder to parties subject to administrative protective orders (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305, which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations VerDate Mar<15>2010 19:10 Sep 10, 2012 Jkt 226001 and terms of an APO is a violation which is subject to sanction. We are issuing and publishing this administrative review and notice in accordance with sections 751(a)(1) and 777(i) of the Act. Dated: September 4, 2012. Ronald K. Lorentzen, Acting Assistant Secretary for Import Administration. Appendix Comment 1: FOP Database Used to Calculate Bluefield’s Normal Value Comment 2: Calculation of Land Rent Comment 3: Valuation of Rice Straw Comment 4: Valuation of Manure Comment 5: Use of Indian Surrogate Values to Value Manure and Straw Comment 6: Valuation of Coal Comment 7: Valuation of Water [FR Doc. 2012–22353 Filed 9–10–12; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration Meeting of the Manufacturing Council International Trade Administration, U.S. Department of Commerce. ACTION: Notice of an open meeting. AGENCY: The Manufacturing Council will hold a meeting to hear updates from the Department of Commerce in addition to the Council’s ex-officio members, the Secretaries of Energy, Labor, and the Treasury (or their designees) on the Government response to past Council recommendations. At the meeting, the Board will hear and deliberate on proposed recommendations to be presented by the Workforce Development subcommittee. The Board members also will summarize all recommendations adopted throughout their 2010–2012 appointment term in a final presentation to the Secretary of Commerce. DATES: September 28, 2012 9:30 a.m.– 11:30 a.m. Eastern Daylight Time (EDT). As specified below, registration and any requests for auxiliary aids should be submitted no later than September 21, 2012. SUMMARY: U.S. Department of Commerce, 1401 Constitution Avenue NW., Room 4830, Washington, DC. Registration and any requests for auxiliary aids should be submitted to Jennifer Pilat, the Manufacturing Council, Room 4043, 1401 Constitution Avenue NW., Washington, DC 20230, telephone 202–482–4501, OACIE@trade.gov. Last minute requests ADDRESSES: PO 00000 Frm 00017 Fmt 4703 Sfmt 9990 will be accepted, but may be impossible to fill. FOR FURTHER INFORMATION CONTACT: Jennifer Pilat, the Manufacturing Council, Room 4043, 1401 Constitution Avenue NW., Washington, DC, 20230, telephone: 202–482–4501, email: OACIE@trade.gov SUPPLEMENTARY INFORMATION: Background: The Council was rechartered on April 5, 2012 to advise the Secretary of Commerce on matters relating to the U.S. manufacturing industry. This will be the final meeting of the current members and will review past recommendations, the Government responses to those recommendations, and deliberate on proposed new recommendations to be presented by the Workforce Development subcommittee. The Department will publish in the near future a separate notice soliciting nominations for new appointments. All guests are required to register in advance. This program will be physically accessible to people with disabilities. Seating is limited and will be on a first come, first served basis. As noted above, registration and any requests for auxiliary aids should be submitted no later than September 21, 2012, to Jennifer Pilat, the Manufacturing Council, Room 4043, 1401 Constitution Avenue NW., Washington, DC, 20230, telephone 202– 482–4501, OACIE@trade.gov. Last minute requests will be accepted, but may be impossible to fill. While members of the public are welcome to attend the meeting, there will not be sufficient time available for oral comments from members of the public. Any member of the public may submit pertinent written comments at any time before or after the meeting. Comments may be submitted to Jennifer Pilat at the contact information indicated above. To be considered during the meeting, comments must be received no later than 5 p.m. Eastern Time on September 21, 2012, to ensure transmission to the Council prior to the meeting. Comments received after that date will be distributed to the members but may not be considered at the meeting. Copies of Council meeting minutes will be available within 90 days of the meeting. Dated: September 5, 2012. Jennifer Pilat, Executive Secretary, The Manufacturing Council. [FR Doc. 2012–22227 Filed 9–10–12; 8:45 am] BILLING CODE 3510–DR–P E:\FR\FM\11SEN1.SGM 11SEN1

Agencies

[Federal Register Volume 77, Number 176 (Tuesday, September 11, 2012)]
[Notices]
[Page 55810]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2012-22227]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration


Meeting of the Manufacturing Council

AGENCY: International Trade Administration, U.S. Department of 
Commerce.

ACTION: Notice of an open meeting.

-----------------------------------------------------------------------

SUMMARY: The Manufacturing Council will hold a meeting to hear updates 
from the Department of Commerce in addition to the Council's ex-officio 
members, the Secretaries of Energy, Labor, and the Treasury (or their 
designees) on the Government response to past Council recommendations. 
At the meeting, the Board will hear and deliberate on proposed 
recommendations to be presented by the Workforce Development 
subcommittee. The Board members also will summarize all recommendations 
adopted throughout their 2010-2012 appointment term in a final 
presentation to the Secretary of Commerce.

DATES: September 28, 2012 9:30 a.m.-11:30 a.m. Eastern Daylight Time 
(EDT). As specified below, registration and any requests for auxiliary 
aids should be submitted no later than September 21, 2012.

ADDRESSES: U.S. Department of Commerce, 1401 Constitution Avenue NW., 
Room 4830, Washington, DC. Registration and any requests for auxiliary 
aids should be submitted to Jennifer Pilat, the Manufacturing Council, 
Room 4043, 1401 Constitution Avenue NW., Washington, DC 20230, 
telephone 202-482-4501, OACIE@trade.gov. Last minute requests will be 
accepted, but may be impossible to fill.

FOR FURTHER INFORMATION CONTACT: Jennifer Pilat, the Manufacturing 
Council, Room 4043, 1401 Constitution Avenue NW., Washington, DC, 
20230, telephone: 202-482-4501, email: OACIE@trade.gov

SUPPLEMENTARY INFORMATION: Background: The Council was re-chartered on 
April 5, 2012 to advise the Secretary of Commerce on matters relating 
to the U.S. manufacturing industry. This will be the final meeting of 
the current members and will review past recommendations, the 
Government responses to those recommendations, and deliberate on 
proposed new recommendations to be presented by the Workforce 
Development subcommittee. The Department will publish in the near 
future a separate notice soliciting nominations for new appointments.
    All guests are required to register in advance. This program will 
be physically accessible to people with disabilities. Seating is 
limited and will be on a first come, first served basis. As noted 
above, registration and any requests for auxiliary aids should be 
submitted no later than September 21, 2012, to Jennifer Pilat, the 
Manufacturing Council, Room 4043, 1401 Constitution Avenue NW., 
Washington, DC, 20230, telephone 202-482-4501, OACIE@trade.gov. Last 
minute requests will be accepted, but may be impossible to fill.
    While members of the public are welcome to attend the meeting, 
there will not be sufficient time available for oral comments from 
members of the public. Any member of the public may submit pertinent 
written comments at any time before or after the meeting. Comments may 
be submitted to Jennifer Pilat at the contact information indicated 
above. To be considered during the meeting, comments must be received 
no later than 5 p.m. Eastern Time on September 21, 2012, to ensure 
transmission to the Council prior to the meeting. Comments received 
after that date will be distributed to the members but may not be 
considered at the meeting.
    Copies of Council meeting minutes will be available within 90 days 
of the meeting.

    Dated: September 5, 2012.
Jennifer Pilat,
Executive Secretary, The Manufacturing Council.
[FR Doc. 2012-22227 Filed 9-10-12; 8:45 am]
BILLING CODE 3510-DR-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.