University of Wisconsin-Madison, et al.; Notice of Consolidated Decision on Applications for Duty-Free Entry of Electron Microscope, 52681-52682 [2012-21453]

Download as PDF Federal Register / Vol. 77, No. 169 / Thursday, August 30, 2012 / Notices procedures could allow AES to choose the duty rates during customs entry procedures that apply to the finished cascades (duty rate 2.6%) for the foreign status inputs noted below. Components and materials sourced from abroad include: plastic tubing, plastic pipework, centrifuge floormounting elements, UF6 pipework/ fittings, parts of cascades, vacuum pumps, UF6 pumps, heat exchange units, autoclaves, stations, parts of stations, machinery parts, UF6 valves and centrifuge drive systems (duty rate ranges from duty-free to 5.7%). Public comment is invited from interested parties. Submissions shall be addressed to the Board’s Executive Secretary at the address below. The closing period for their receipt is October 9, 2012. A copy of the notification will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the Board’s Web site, which is accessible via www.trade.gov/ftz. For further information, contact Elizabeth Whiteman at Elizabeth.Whiteman@trade.gov or (202) 482–0473. Dated: August 22, 2012. Andrew McGilvray, Executive Secretary. [FR Doc. 2012–21454 Filed 8–29–12; 8:45 am] BILLING CODE P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [Order No. 1850] Reorganization and Expansion of Foreign-Trade Zone 219 Under Alternative Site Framework Yuma, AZ mstockstill on DSK4VPTVN1PROD with NOTICES Pursuant to its authority under the ForeignTrade Zones Act of June 18, 1934, as amended (19 U.S.C. 81a–81u), the ForeignTrade Zones Board (the Board) adopts the following Order: Whereas, the Board adopted the alternative site framework (ASF) (74 FR 1170, 01/12/09; correction 74 FR 3987, 01/22/09; 75 FR 71069–71070, 11/22/ 10) as an option for the establishment or reorganization of zones; Whereas, the Greater Yuma Economic Development Corporation, grantee of Foreign-Trade Zone 219, submitted an application to the Board (FTZ Docket 6– 2012, filed 01/13/2012) for authority to reorganize and expand under the ASF VerDate Mar<15>2010 17:07 Aug 29, 2012 Jkt 226001 with a service area of Yuma County, Arizona, in and adjacent to the San Luis U.S. Customs and Border Protection port of entry, FTZ 219’s existing Sites 1 and 2 and new Site 4 would be categorized as magnet sites, Site 3 would be removed from the zone and the grantee proposes one initial usagedriven site (Site 5); Whereas, notice inviting public comment was given in the Federal Register (77 FR 2957–2958, 01/20/2012) and the application has been processed pursuant to the FTZ Act and the Board’s regulations; and, Whereas, the Board adopts the findings and recommendation of the examiner’s report, and finds that the requirements of the FTZ Act and the Board’s regulations are satisfied, and that the proposal is in the public interest; Now, Therefore, the Board hereby orders: The application to reorganize and expand FTZ 219 under the alternative site framework is approved, subject to the FTZ Act and the Board’s regulations, including Section 400.13, to the Board’s standard 2,000-acre activation limit for the zone, to a five-year ASF sunset provision for magnet sites that would terminate authority for Site 2 and Site 4 if not activated by August 31, 2017, and to a three-year ASF sunset provision for usage-driven sites that would terminate authority for Site 5 if no foreign-status merchandise is admitted for a bona fide customs purpose by August 31, 2015. Signed at Washington, DC, this 17th day of August 2012. Ronald K. Lorentzen, Acting Assistant Secretary of Commerce for Import Administration, Alternate Chairman, Foreign-Trade Zones Board. Andrew McGilvray, Executive Secretary. [FR Doc. 2012–21325 Filed 8–29–12; 8:45 am] BILLING CODE P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [Order No. 1847] Reorganization and Expansion of Foreign-Trade Zone 87 Lake Charles, LA Pursuant to its authority under the ForeignTrade Zones Act of June 18, 1934, as amended (19 U.S.C. 81a–81u), the ForeignTrade Zones Board (the Board) adopts the following Order: Whereas, the Lake Charles Harbor & Terminal District, grantee of Foreign- PO 00000 Frm 00006 Fmt 4703 Sfmt 4703 52681 Trade Zone 87, submitted an application to the Board for authority to reorganize and expand FTZ 87 in Lake Charles, Louisiana, to reduce acreage at Site 1 (new acreage—41.10 acres), expand Site 2 (new acreage—391.73 acres), remove Site 4, reduce acreage at Site 5 (new acreage—365.26 acres), and remove a parcel and add additional acreage to Site 6 (new acreage—1628.27 acres), within the Lake Charles U.S. Customs and Border Protection port of entry (FTZ Docket 71–2011, filed November 8, 2011); Whereas, notice inviting public comment has been given in the Federal Register (76 FR 70704, 11/15/2011) and the application has been processed pursuant to the FTZ Act and the Board’s regulations; and, Whereas, the Board adopts the findings and recommendations of the examiner’s report, and finds that the requirements of the FTZ Act and the Board’s regulations are satisfied, and that the proposal is in the public interest; Now, therefore, the Board hereby orders: The application to reorganize and expand FTZ 87 is approved, subject to the FTZ Act and the Board’s regulations, including Section 400.13, and further subject to the Board’s standard 2,000acre activation limit. Signed at Washington, DC, this August 17, 2012. Ronald K. Lorentzen, Acting Assistant Secretary of Commerce, for Import Administration, Alternate Chairman, Foreign-Trade Zones Board. [FR Doc. 2012–21347 Filed 8–29–12; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration University of Wisconsin—Madison, et al.; Notice of Consolidated Decision on Applications for Duty-Free Entry of Electron Microscope This is a decision consolidated pursuant to Section 6(c) of the Educational, Scientific, and Cultural Materials Importation Act of 1966 (Pub. L. 89–651, as amended by Pub. L. 106– 36; 80 Stat. 897; 15 CFR part 301). Related records can be viewed between 8:30 a.m. and 5 p.m. in Room 3720, U.S. Department of Commerce, 14th and Constitution Avenue NW., Washington, DC Docket Number: 12–026. Applicant: University of Wisconsin—Madison, Madison, WI 53715–1218. Instrument: Electron Microscope. Manufacturer: FEI E:\FR\FM\30AUN1.SGM 30AUN1 52682 Federal Register / Vol. 77, No. 169 / Thursday, August 30, 2012 / Notices Company, the Netherlands. Intended Use: See notice at 77 FR 42484, July 19, 2012. Docket Number: 12–029. Applicant: University of Alabama at Birmingham, Birmingham, AL 35294–4461. Instrument: Electron Microscope. Manufacturer: FEI Company, Czech Republic. Intended Use: See notice at 77 FR 42484, July 19, 2012. Docket Number: 12–030. Applicant: Ohio State University, Columbus, OH 43210. Instrument: Electron Microscope. Manufacturer: FEI Company, the Netherlands. Intended Use: See notice at 77 FR 42484, July 19, 2012. Docket Number: 12–032. Applicant: Louisiana State University, Baton Rouge, LA 70803–1715. Instrument: Electron Microscope. Manufacturer: JEOL, Ltd., Japan. Intended Use: See notice at 77 FR 42484, July 19, 2012. Comments: None received. Decision: Approved. No instrument of equivalent scientific value to the foreign instrument, for such purposes as this instrument is intended to be used, is being manufactured in the United States at the time the instrument was ordered. Reasons: Each foreign instrument is an electron microscope and is intended for research or scientific educational uses requiring an electron microscope. We know of no electron microscope, or any other instrument suited to these purposes, which was being manufactured in the United States at the time of order of each instrument. Dated: August 20, 2012. Gregory W. Campbell, Director, Subsidies Enforcement Office, Import Administration. China (‘‘PRC’’) would likely lead to a continuation or recurrence of dumping and material injury to an industry in the United States, the Department is publishing a notice of continuation of the antidumping duty order. DATES: Effective Date: August 30, 2012. FOR FURTHER INFORMATION CONTACT: Lindsey Novom, AD/CVD Operations, Office 8, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482–5256. On August 1, 2011, the Department initiated the third sunset review of the antidumping duty order on TRBs from the PRC pursuant to section 751(c) of the Tariff Act of 1930, as amended (‘‘Act’’).1 As a result of its review, the Department determined that revocation of the antidumping duty order on TRBs from the PRC would likely lead to a continuation or recurrence of dumping and, therefore, notified the ITC of the magnitude of the margins likely to prevail should the order be revoked.2 On July 31, 2012, the ITC determined, pursuant to section 751(c) of the Act, that revocation of the antidumping duty order on TRBs from the PRC would likely lead to a continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time.3 SUPPLEMENTARY INFORMATION: Scope of the Order [FR Doc. 2012–21453 Filed 8–29–12; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [A–570–601] Tapered Roller Bearings and Parts Thereof, Finished and Unfinished, From the People’s Republic of China: Continuation of the Antidumping Duty Order Import Administration, International Trade Administration, Department of Commerce. SUMMARY: As a result of the determinations by the Department of Commerce (‘‘Department’’) and the International Trade Commission (‘‘ITC’’) that revocation of the antidumping duty order on tapered roller bearings and parts thereof, finished and unfinished (‘‘TRBs’’), from the People’s Republic of The products covered by the order are tapered roller bearings and parts thereof, finished and unfinished, from the PRC; flange, take up cartridge, and hanger units incorporating tapered roller bearings; and tapered roller housings (except pillow blocks) incorporating tapered rollers, with or without spindles, whether or not for automotive use. These products are currently classifiable under Harmonized Tariff Schedule of the United States (‘‘HTSUS’’) item numbers 8482.20.00, 8482.91.00.50, 8482.99.15, 8482.99.45, 8483.20.40, 8483.20.80, 8483.30.80, 8483.90.20, 8483.90.30, 8483.90.80, mstockstill on DSK4VPTVN1PROD with NOTICES AGENCY: VerDate Mar<15>2010 17:07 Aug 29, 2012 Jkt 226001 1 See Initiation of Five-Year (‘‘Sunset’’) Review, 76 FR 45778 (August 1, 2011) (‘‘Sunset Initiation’’). 2 See Tapered Roller Bearings and Parts Thereof, Finished and Unfinished, from the People’s Republic of China: Final Results of the Expedited Third Sunset Review of the Antidumping Duty Order, 76 FR 76143 (December 6, 2011). 3 See Tapered Roller Bearings from China: Investigation No. 731–TA–344 (Third Review), USITC Publication 4343 (August 2012), and Tapered Roller Bearings From China, 77 FR 50716 (August 22, 2012). PO 00000 Frm 00007 Fmt 4703 Sfmt 4703 8708.99.80.15 4 and 8708.99.80.80.5 Although the HTSUS item numbers are provided for convenience and customs purposes, the written description of the scope of the order and this review is dispositive.6 Continuation of the Order As a result of these determinations by the Department and the ITC that revocation of the antidumping duty order on TRBs would likely lead to a continuation or recurrence of dumping and material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act, the Department hereby orders the continuation of the antidumping duty order on TRBs from the PRC. U.S. Customs and Border Protection will continue to collect antidumping duty cash deposits at the rates in effect at the time of entry for all imports of subject merchandise. The effective date of the continuation of the order will be the date of publication in the Federal Register of this notice of continuation. Pursuant to section 751(c)(2) of the Act, the Department intends to initiate the next five-year review of the order not later than 30 days prior to the fifth anniversary of the effective date of continuation. This five-year sunset review and this notice are in accordance with section 4 Effective January 1, 2007, the HTSUS subheading 8708.99.8015 is renumbered as 8708.99.8115. See ITC publication entitled, ‘‘Modifications to the Harmonized Tariff Schedule of the United States Under Section 1206 of the Omnibus Trade and Competitiveness Act of 1988,’’ USITC Publication 3898 (December 2006) found at www.usitc.gov. 5 Effective January 1, 2007, the HTSUS subheading 8708.99.8080 is renumbered as 8708.99.8180. Id. 6 Subsequent to the issuance of the order, the Department has issued numerous scope rulings. See Memorandum entitled ‘‘Tapered Roller Bearings from the People’s Republic of China: Final Scope Ruling on Blackstone OTR LLC and OTR Wheel Engineering, Inc.’s Wheel Hub Assemblies and TRBs,’’ dated February 7, 2011 (finding Blackstone OTR LLC and OTR Wheel Engineering, Inc.’s wheel hub assemblies are within the scope of the order); Memorandum entitled, ‘‘Tapered Roller Bearings from the People’s Republic of China: Final Scope Ruling on New Trend Engineering Ltd.’s Wheel Hub Assemblies,’’ dated April 18, 2011 (finding New Trend Engineering Limited’s splined and nonsplined wheel hub assemblies without antilock braking system (‘‘ABS’’) elements are included in the scope of the order and its wheel hub assemblies with ABS elements are also included in the scope of the order); Memorandum entitled ‘‘Tapered Roller Bearings from the People’s Republic of China Final Scope Determination on Bosda’s Wheel Hub Assemblies,’’ dated June 14, 2011 (finding Bosda International (USA) LLC’s wheel hub assemblies are within the scope of the order); and Memorandum entitled ‘‘Tapered Roller Bearings and Parts Thereof, finished and Unfinished, from the People’s Republic of China—Final Scope Determination on DF Machinery’s Agricultural Hub Units,’’ dated August 3, 2011 (finding DF Machinery International, Inc.’s agricultural hub units are included in the scope of the order). E:\FR\FM\30AUN1.SGM 30AUN1

Agencies

[Federal Register Volume 77, Number 169 (Thursday, August 30, 2012)]
[Notices]
[Pages 52681-52682]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2012-21453]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration


University of Wisconsin--Madison, et al.; Notice of Consolidated 
Decision on Applications for Duty-Free Entry of Electron Microscope

    This is a decision consolidated pursuant to Section 6(c) of the 
Educational, Scientific, and Cultural Materials Importation Act of 1966 
(Pub. L. 89-651, as amended by Pub. L. 106-36; 80 Stat. 897; 15 CFR 
part 301). Related records can be viewed between 8:30 a.m. and 5 p.m. 
in Room 3720, U.S. Department of Commerce, 14th and Constitution Avenue 
NW., Washington, DC
    Docket Number: 12-026. Applicant: University of Wisconsin--Madison, 
Madison, WI 53715-1218. Instrument: Electron Microscope. Manufacturer: 
FEI

[[Page 52682]]

Company, the Netherlands. Intended Use: See notice at 77 FR 42484, July 
19, 2012.
    Docket Number: 12-029. Applicant: University of Alabama at 
Birmingham, Birmingham, AL 35294-4461. Instrument: Electron Microscope. 
Manufacturer: FEI Company, Czech Republic. Intended Use: See notice at 
77 FR 42484, July 19, 2012.
    Docket Number: 12-030. Applicant: Ohio State University, Columbus, 
OH 43210. Instrument: Electron Microscope. Manufacturer: FEI Company, 
the Netherlands. Intended Use: See notice at 77 FR 42484, July 19, 
2012.
    Docket Number: 12-032. Applicant: Louisiana State University, Baton 
Rouge, LA 70803-1715. Instrument: Electron Microscope. Manufacturer: 
JEOL, Ltd., Japan. Intended Use: See notice at 77 FR 42484, July 19, 
2012.
    Comments: None received. Decision: Approved. No instrument of 
equivalent scientific value to the foreign instrument, for such 
purposes as this instrument is intended to be used, is being 
manufactured in the United States at the time the instrument was 
ordered. Reasons: Each foreign instrument is an electron microscope and 
is intended for research or scientific educational uses requiring an 
electron microscope. We know of no electron microscope, or any other 
instrument suited to these purposes, which was being manufactured in 
the United States at the time of order of each instrument.

    Dated: August 20, 2012.
Gregory W. Campbell,
Director, Subsidies Enforcement Office, Import Administration.
[FR Doc. 2012-21453 Filed 8-29-12; 8:45 am]
BILLING CODE 3510-DS-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.